From: Vladimir Oltean <olteanv@gmail.com>
To: Sean Anderson <sean.anderson@seco.com>
Cc: Andrew Lunn <andrew@lunn.ch>,
Heiner Kallweit <hkallweit1@gmail.com>,
Russell King <linux@armlinux.org.uk>,
netdev@vger.kernel.org, Eric Dumazet <edumazet@google.com>,
Tim Harvey <tharvey@gateworks.com>,
"David S . Miller" <davem@davemloft.net>,
linux-kernel@vger.kernel.org, Paolo Abeni <pabeni@redhat.com>,
Jakub Kicinski <kuba@kernel.org>
Subject: Re: [PATCH] phy: aquantia: Configure SERDES mode by default
Date: Wed, 16 Nov 2022 00:37:32 +0200 [thread overview]
Message-ID: <20221115223732.ctvzjbpeaxulnm5l@skbuf> (raw)
In-Reply-To: <20221114210740.3332937-1-sean.anderson@seco.com> <20221114210740.3332937-1-sean.anderson@seco.com>
On Mon, Nov 14, 2022 at 04:07:39PM -0500, Sean Anderson wrote:
> When autonegotiation completes, the phy interface will be set based on
> the global config register for that speed. If the SERDES mode is set to
> something which the MAC does not support, then the link will not come
> up. The register reference says that the SERDES mode should default to
> XFI, but for some phys lower speeds default to XFI/2 (5G XFI). To ensure
> the link comes up correctly, configure the SERDES mode.
>
> We use the same configuration for all interfaces. We don't advertise
> any speeds faster than the interface mode, so they won't be selected.
> We default to pause-based rate adaptation, but enable USXGMII rate
> adaptation for USXGMII. I'm not sure if this is correct for
> SGMII; it might need USXGMII adaptation instead.
>
> This effectively disables switching interface mode depending on the
> speed, in favor of using rate adaptation. If this is not desired, we
> would need some kind of API to configure things.
>
> Signed-off-by: Sean Anderson <sean.anderson@seco.com>
> ---
Was this patch tested and confirmed to do something sane on any platform
at all?
next prev parent reply other threads:[~2022-11-15 22:37 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-14 21:07 [PATCH] phy: aquantia: Configure SERDES mode by default Sean Anderson
2022-11-15 22:37 ` Vladimir Oltean [this message]
2022-11-15 22:46 ` Sean Anderson
2022-11-15 23:02 ` Vladimir Oltean
2022-11-17 23:40 ` Sean Anderson
2022-11-18 0:02 ` Andrew Lunn
2022-11-18 17:16 ` Vladimir Oltean
2022-11-18 18:56 ` Andrew Lunn
2022-11-29 0:20 ` Tim Harvey
2022-11-18 16:49 ` Vladimir Oltean
2022-11-18 17:11 ` Sean Anderson
2022-11-18 17:30 ` Vladimir Oltean
2022-11-18 18:01 ` Sean Anderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221115223732.ctvzjbpeaxulnm5l@skbuf \
--to=olteanv@gmail.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=hkallweit1@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=sean.anderson@seco.com \
--cc=tharvey@gateworks.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).