[PATCH v2 0/5] net/crypto: Introduce crypto_pool

[PATCH v2 0/5] net/crypto: Introduce crypto_pool

[Dmitry Safonov]

Changes since v1 [1]:
- Patches went through 3 iterations inside bigger TCP-AO patch set [2],
  now I'm splitting it apart and sending it once again as a stand-alone
  patch set to help reviewing it and make it easier to merge.
  It is second part of that big series, once it merges the next part
  will be TCP changes to add Authentication Option support (RFC5925),
  that use API provided by these patches.
- Corrected kerneldoc-style comment near crypto_pool_reserve_scratch()
  (Reported-By: kernel test robot <lkp@intel.com>)
- Added short Documentation/ page for crypto_pool API

Add crypto_pool - an API for allocating per-CPU array of crypto requests
on slow-path (in sleep'able contexts) and for using them on a fast-path,
which is RX/TX for net/* users.

The design is based on the current implementations of md5sig_pool, which
this patch set makes generic by separating it from TCP core, moving it
to crypto/ and adding support for other hashing algorithms than MD5.
It makes a generic implementation for a common net/ pattern.

The initial motivation to have this API is TCP-AO, that's going to use
the very same pattern as TCP-MD5, but for multiple hashing algorithms.
Previously, I've suggested to add such API on TCP-AO patch submission [3],
where Herbert kindly suggested to help with introducing new crypto API.
See also discussion and motivation in crypto_pool-v1 [4].

The API will allow:
- to reuse per-CPU ahash_request(s) for different users
- to allocate only one per-CPU scratch buffer rather than a new one for
  each user
- to have a common API for net/ users that need ahash on RX/TX fast path

In this version I've wired up TCP-MD5 and IPv6-SR-HMAC as users.
Potentially, xfrm_ipcomp and xfrm_ah can be converted as well.
The initial reason for patches would be to have TCP-AO as a user, which
would let it share per-CPU crypto_request for any supported hashing
algorithm.

[1]: https://lore.kernel.org/all/20220726201600.1715505-1-dima@arista.com/ 
[2]: https://lore.kernel.org/all/20221027204347.529913-1-dima@arista.com/T/#u
[3]: http://lkml.kernel.org/r/20211106034334.GA18577@gondor.apana.org.au
[4]: https://lore.kernel.org/all/26d5955b-3807-a015-d259-ccc262f665c2@arista.com/T/#u

Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Bob Gilligan <gilligan@arista.com>
Cc: David Ahern <dsahern@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Leonard Crestez <cdleonard@gmail.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Salam Noureddine <noureddine@arista.com>
Cc: netdev@vger.kernel.org
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org

Dmitry Safonov (5):
  crypto: Introduce crypto_pool
  crypto/pool: Add crypto_pool_reserve_scratch()
  crypto/net/tcp: Use crypto_pool for TCP-MD5
  crypto/net/ipv6: sr: Switch to using crypto_pool
  crypto/Documentation: Add crypto_pool kernel API

 Documentation/crypto/crypto_pool.rst |  33 +++
 crypto/Kconfig                       |  12 +
 crypto/Makefile                      |   1 +
 crypto/crypto_pool.c                 | 338 +++++++++++++++++++++++++++
 include/crypto/pool.h                |  33 +++
 include/net/seg6_hmac.h              |   7 -
 include/net/tcp.h                    |  24 +-
 net/ipv4/Kconfig                     |   2 +-
 net/ipv4/tcp.c                       | 105 +++------
 net/ipv4/tcp_ipv4.c                  |  92 +++++---
 net/ipv4/tcp_minisocks.c             |  21 +-
 net/ipv6/Kconfig                     |   2 +-
 net/ipv6/seg6.c                      |   3 -
 net/ipv6/seg6_hmac.c                 | 204 +++++++---------
 net/ipv6/tcp_ipv6.c                  |  53 ++---
 15 files changed, 626 insertions(+), 304 deletions(-)
 create mode 100644 Documentation/crypto/crypto_pool.rst
 create mode 100644 crypto/crypto_pool.c
 create mode 100644 include/crypto/pool.h


base-commit: 69b41ac87e4a664de78a395ff97166f0b2943210
-- 
2.39.0

[PATCH v2 1/5] crypto: Introduce crypto_pool

[Dmitry Safonov]

Introduce a per-CPU pool of async crypto requests that can be used
in bh-disabled contexts (designed with net RX/TX softirqs as users in
mind). Allocation can sleep and is a slow-path.
Initial implementation has only ahash as a backend and a fix-sized array
of possible algorithms used in parallel.

Signed-off-by: Dmitry Safonov <dima@arista.com>
---
 crypto/Kconfig        |   6 +
 crypto/Makefile       |   1 +
 crypto/crypto_pool.c  | 291 ++++++++++++++++++++++++++++++++++++++++++
 include/crypto/pool.h |  34 +++++
 4 files changed, 332 insertions(+)
 create mode 100644 crypto/crypto_pool.c
 create mode 100644 include/crypto/pool.h

diff --git a/crypto/Kconfig b/crypto/Kconfig
index 9c86f7045157..ba8d4a1f10f9 100644
--- a/crypto/Kconfig
+++ b/crypto/Kconfig
@@ -1388,6 +1388,12 @@ endmenu
 config CRYPTO_HASH_INFO
 	bool
 
+config CRYPTO_POOL
+	tristate "Per-CPU crypto pool"
+	default n
+	help
+	  Per-CPU pool of crypto requests ready for usage in atomic contexts.
+
 if !KMSAN # avoid false positives from assembly
 if ARM
 source "arch/arm/crypto/Kconfig"
diff --git a/crypto/Makefile b/crypto/Makefile
index d0126c915834..eed8f61bc93b 100644
--- a/crypto/Makefile
+++ b/crypto/Makefile
@@ -63,6 +63,7 @@ obj-$(CONFIG_CRYPTO_ACOMP2) += crypto_acompress.o
 cryptomgr-y := algboss.o testmgr.o
 
 obj-$(CONFIG_CRYPTO_MANAGER2) += cryptomgr.o
+obj-$(CONFIG_CRYPTO_POOL) += crypto_pool.o
 obj-$(CONFIG_CRYPTO_USER) += crypto_user.o
 crypto_user-y := crypto_user_base.o
 crypto_user-$(CONFIG_CRYPTO_STATS) += crypto_user_stat.o
diff --git a/crypto/crypto_pool.c b/crypto/crypto_pool.c
new file mode 100644
index 000000000000..37131952c5a7
--- /dev/null
+++ b/crypto/crypto_pool.c
@@ -0,0 +1,291 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include <crypto/pool.h>
+#include <linux/kref.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/percpu.h>
+#include <linux/workqueue.h>
+
+static unsigned long scratch_size = DEFAULT_CRYPTO_POOL_SCRATCH_SZ;
+static DEFINE_PER_CPU(void *, crypto_pool_scratch);
+
+struct crypto_pool_entry {
+	struct ahash_request * __percpu *req;
+	const char			*alg;
+	struct kref			kref;
+	bool				needs_key;
+};
+
+#define CPOOL_SIZE (PAGE_SIZE/sizeof(struct crypto_pool_entry))
+static struct crypto_pool_entry cpool[CPOOL_SIZE];
+static unsigned int cpool_populated;
+static DEFINE_MUTEX(cpool_mutex);
+
+static int crypto_pool_scratch_alloc(void)
+{
+	int cpu;
+
+	lockdep_assert_held(&cpool_mutex);
+
+	for_each_possible_cpu(cpu) {
+		void *scratch = per_cpu(crypto_pool_scratch, cpu);
+
+		if (scratch)
+			continue;
+
+		scratch = kmalloc_node(scratch_size, GFP_KERNEL,
+				       cpu_to_node(cpu));
+		if (!scratch)
+			return -ENOMEM;
+		per_cpu(crypto_pool_scratch, cpu) = scratch;
+	}
+	return 0;
+}
+
+static void crypto_pool_scratch_free(void)
+{
+	int cpu;
+
+	lockdep_assert_held(&cpool_mutex);
+
+	for_each_possible_cpu(cpu) {
+		void *scratch = per_cpu(crypto_pool_scratch, cpu);
+
+		if (!scratch)
+			continue;
+		per_cpu(crypto_pool_scratch, cpu) = NULL;
+		kfree(scratch);
+	}
+}
+
+static int __cpool_alloc_ahash(struct crypto_pool_entry *e, const char *alg)
+{
+	struct crypto_ahash *hash;
+	int cpu, ret = -ENOMEM;
+
+	e->alg = kstrdup(alg, GFP_KERNEL);
+	if (!e->alg)
+		return -ENOMEM;
+
+	e->req = alloc_percpu(struct ahash_request *);
+	if (!e->req)
+		goto out_free_alg;
+
+	hash = crypto_alloc_ahash(alg, 0, CRYPTO_ALG_ASYNC);
+	if (IS_ERR(hash)) {
+		ret = PTR_ERR(hash);
+		goto out_free_req;
+	}
+
+	/* If hash has .setkey(), allocate ahash per-cpu, not only request */
+	e->needs_key = crypto_ahash_get_flags(hash) & CRYPTO_TFM_NEED_KEY;
+
+	for_each_possible_cpu(cpu) {
+		struct ahash_request *req;
+
+		if (!hash)
+			hash = crypto_alloc_ahash(alg, 0, CRYPTO_ALG_ASYNC);
+		if (IS_ERR(hash))
+			goto out_free;
+
+		req = ahash_request_alloc(hash, GFP_KERNEL);
+		if (!req)
+			goto out_free;
+
+		ahash_request_set_callback(req, 0, NULL, NULL);
+
+		*per_cpu_ptr(e->req, cpu) = req;
+
+		if (e->needs_key)
+			hash = NULL;
+	}
+	kref_init(&e->kref);
+	return 0;
+
+out_free:
+	if (!IS_ERR_OR_NULL(hash) && e->needs_key)
+		crypto_free_ahash(hash);
+
+	for_each_possible_cpu(cpu) {
+		if (*per_cpu_ptr(e->req, cpu) == NULL)
+			break;
+		hash = crypto_ahash_reqtfm(*per_cpu_ptr(e->req, cpu));
+		ahash_request_free(*per_cpu_ptr(e->req, cpu));
+		if (e->needs_key) {
+			crypto_free_ahash(hash);
+			hash = NULL;
+		}
+	}
+
+	if (hash)
+		crypto_free_ahash(hash);
+out_free_req:
+	free_percpu(e->req);
+out_free_alg:
+	kfree(e->alg);
+	e->alg = NULL;
+	return ret;
+}
+
+/**
+ * crypto_pool_alloc_ahash - allocates pool for ahash requests
+ * @alg: name of async hash algorithm
+ */
+int crypto_pool_alloc_ahash(const char *alg)
+{
+	int i, ret;
+
+	/* slow-path */
+	mutex_lock(&cpool_mutex);
+
+	for (i = 0; i < cpool_populated; i++) {
+		if (cpool[i].alg && !strcmp(cpool[i].alg, alg)) {
+			if (kref_read(&cpool[i].kref) > 0) {
+				kref_get(&cpool[i].kref);
+				ret = i;
+				goto out;
+			} else {
+				break;
+			}
+		}
+	}
+
+	for (i = 0; i < cpool_populated; i++) {
+		if (!cpool[i].alg)
+			break;
+	}
+	if (i >= CPOOL_SIZE) {
+		ret = -ENOSPC;
+		goto out;
+	}
+
+	ret = __cpool_alloc_ahash(&cpool[i], alg);
+	if (!ret) {
+		ret = i;
+		if (i == cpool_populated)
+			cpool_populated++;
+	}
+out:
+	mutex_unlock(&cpool_mutex);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(crypto_pool_alloc_ahash);
+
+static void __cpool_free_entry(struct crypto_pool_entry *e)
+{
+	struct crypto_ahash *hash = NULL;
+	int cpu;
+
+	for_each_possible_cpu(cpu) {
+		if (*per_cpu_ptr(e->req, cpu) == NULL)
+			continue;
+
+		hash = crypto_ahash_reqtfm(*per_cpu_ptr(e->req, cpu));
+		ahash_request_free(*per_cpu_ptr(e->req, cpu));
+		if (e->needs_key) {
+			crypto_free_ahash(hash);
+			hash = NULL;
+		}
+	}
+	if (hash)
+		crypto_free_ahash(hash);
+	free_percpu(e->req);
+	kfree(e->alg);
+	memset(e, 0, sizeof(*e));
+}
+
+static void cpool_cleanup_work_cb(struct work_struct *work)
+{
+	unsigned int i;
+	bool free_scratch = true;
+
+	mutex_lock(&cpool_mutex);
+	for (i = 0; i < cpool_populated; i++) {
+		if (kref_read(&cpool[i].kref) > 0) {
+			free_scratch = false;
+			continue;
+		}
+		if (!cpool[i].alg)
+			continue;
+		__cpool_free_entry(&cpool[i]);
+	}
+	if (free_scratch)
+		crypto_pool_scratch_free();
+	mutex_unlock(&cpool_mutex);
+}
+
+static DECLARE_WORK(cpool_cleanup_work, cpool_cleanup_work_cb);
+static void cpool_schedule_cleanup(struct kref *kref)
+{
+	schedule_work(&cpool_cleanup_work);
+}
+
+/**
+ * crypto_pool_release - decreases number of users for a pool. If it was
+ * the last user of the pool, releases any memory that was consumed.
+ * @id: crypto_pool that was previously allocated by crypto_pool_alloc_ahash()
+ */
+void crypto_pool_release(unsigned int id)
+{
+	if (WARN_ON_ONCE(id > cpool_populated || !cpool[id].alg))
+		return;
+
+	/* slow-path */
+	kref_put(&cpool[id].kref, cpool_schedule_cleanup);
+}
+EXPORT_SYMBOL_GPL(crypto_pool_release);
+
+/**
+ * crypto_pool_add - increases number of users (refcounter) for a pool
+ * @id: crypto_pool that was previously allocated by crypto_pool_alloc_ahash()
+ */
+void crypto_pool_add(unsigned int id)
+{
+	if (WARN_ON_ONCE(id > cpool_populated || !cpool[id].alg))
+		return;
+	kref_get(&cpool[id].kref);
+}
+EXPORT_SYMBOL_GPL(crypto_pool_add);
+
+/**
+ * crypto_pool_get - disable bh and start using crypto_pool
+ * @id: crypto_pool that was previously allocated by crypto_pool_alloc_ahash()
+ * @c: returned crypto_pool for usage (uninitialized on failure)
+ */
+int crypto_pool_get(unsigned int id, struct crypto_pool *c)
+{
+	struct crypto_pool_ahash *ret = (struct crypto_pool_ahash *)c;
+
+	local_bh_disable();
+	if (WARN_ON_ONCE(id > cpool_populated || !cpool[id].alg)) {
+		local_bh_enable();
+		return -EINVAL;
+	}
+	ret->req = *this_cpu_ptr(cpool[id].req);
+	ret->base.scratch = this_cpu_read(crypto_pool_scratch);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(crypto_pool_get);
+
+/**
+ * crypto_pool_algo - return algorithm of crypto_pool
+ * @id: crypto_pool that was previously allocated by crypto_pool_alloc_ahash()
+ * @buf: buffer to return name of algorithm
+ * @buf_len: size of @buf
+ */
+size_t crypto_pool_algo(unsigned int id, char *buf, size_t buf_len)
+{
+	size_t ret = 0;
+
+	/* slow-path */
+	mutex_lock(&cpool_mutex);
+	if (cpool[id].alg)
+		ret = strscpy(buf, cpool[id].alg, buf_len);
+	mutex_unlock(&cpool_mutex);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(crypto_pool_algo);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Per-CPU pool of crypto requests");
diff --git a/include/crypto/pool.h b/include/crypto/pool.h
new file mode 100644
index 000000000000..2c61aa45faff
--- /dev/null
+++ b/include/crypto/pool.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+#ifndef _CRYPTO_POOL_H
+#define _CRYPTO_POOL_H
+
+#include <crypto/hash.h>
+
+#define DEFAULT_CRYPTO_POOL_SCRATCH_SZ	128
+
+struct crypto_pool {
+	void *scratch;
+};
+
+/*
+ * struct crypto_pool_ahash - per-CPU pool of ahash_requests
+ * @base: common members that can be used by any async crypto ops
+ * @req: pre-allocated ahash request
+ */
+struct crypto_pool_ahash {
+	struct crypto_pool base;
+	struct ahash_request *req;
+};
+
+int crypto_pool_alloc_ahash(const char *alg);
+void crypto_pool_add(unsigned int id);
+void crypto_pool_release(unsigned int id);
+
+int crypto_pool_get(unsigned int id, struct crypto_pool *c);
+static inline void crypto_pool_put(void)
+{
+	local_bh_enable();
+}
+size_t crypto_pool_algo(unsigned int id, char *buf, size_t buf_len);
+
+#endif /* _CRYPTO_POOL_H */
-- 
2.39.0

Re: [PATCH v2 1/5] crypto: Introduce crypto_pool

[Jakub Kicinski]

On Tue,  3 Jan 2023 18:42:53 +0000 Dmitry Safonov wrote:
> Introduce a per-CPU pool of async crypto requests that can be used
> in bh-disabled contexts (designed with net RX/TX softirqs as users in
> mind). Allocation can sleep and is a slow-path.
> Initial implementation has only ahash as a backend and a fix-sized array
> of possible algorithms used in parallel.
> 
> Signed-off-by: Dmitry Safonov <dima@arista.com>

> +config CRYPTO_POOL
> +	tristate "Per-CPU crypto pool"
> +	default n
> +	help
> +	  Per-CPU pool of crypto requests ready for usage in atomic contexts.

Let's make it a hidden symbol? It seems like a low-level library
which gets select'ed, so no point bothering users with questions.

config CRYPTO_POOL
	tristate

that's it.

> +static int crypto_pool_scratch_alloc(void)

This isn't called by anything in this patch..
crypto_pool_alloc_ahash() should call it I'm guessing?

> +{
> +	int cpu;
> +
> +	lockdep_assert_held(&cpool_mutex);
> +
> +	for_each_possible_cpu(cpu) {
> +		void *scratch = per_cpu(crypto_pool_scratch, cpu);
> +
> +		if (scratch)
> +			continue;
> +
> +		scratch = kmalloc_node(scratch_size, GFP_KERNEL,
> +				       cpu_to_node(cpu));
> +		if (!scratch)
> +			return -ENOMEM;
> +		per_cpu(crypto_pool_scratch, cpu) = scratch;
> +	}
> +	return 0;
> +}

> +out_free:
> +	if (!IS_ERR_OR_NULL(hash) && e->needs_key)
> +		crypto_free_ahash(hash);
> +
> +	for_each_possible_cpu(cpu) {
> +		if (*per_cpu_ptr(e->req, cpu) == NULL)
> +			break;
> +		hash = crypto_ahash_reqtfm(*per_cpu_ptr(e->req, cpu));

Could you use a local variable here instead of @hash?
That way you won't need the two separate free_ahash()
one before and one after the loop..

> +		ahash_request_free(*per_cpu_ptr(e->req, cpu));

I think using @req here would be beneficial as well :S

> +		if (e->needs_key) {
> +			crypto_free_ahash(hash);
> +			hash = NULL;
> +		}
> +	}
> +
> +	if (hash)
> +		crypto_free_ahash(hash);

This error handling is tricky as hell, please just add a separate
variable to hold the 

> +out_free_req:
> +	free_percpu(e->req);
> +out_free_alg:
> +	kfree(e->alg);
> +	e->alg = NULL;
> +	return ret;
> +}
> +
> +/**
> + * crypto_pool_alloc_ahash - allocates pool for ahash requests
> + * @alg: name of async hash algorithm
> + */
> +int crypto_pool_alloc_ahash(const char *alg)
> +{
> +	int i, ret;
> +
> +	/* slow-path */
> +	mutex_lock(&cpool_mutex);
> +
> +	for (i = 0; i < cpool_populated; i++) {
> +		if (cpool[i].alg && !strcmp(cpool[i].alg, alg)) {
> +			if (kref_read(&cpool[i].kref) > 0) {

In the current design we can as well resurrect a pool waiting to 
be destroyed, right? Just reinit the ref and we're good.

Otherwise the read() + get() looks quite suspicious to a reader.

> +				kref_get(&cpool[i].kref);
> +				ret = i;
> +				goto out;
> +			} else {
> +				break;
> +			}
> +		}
> +	}
> +
> +	for (i = 0; i < cpool_populated; i++) {
> +		if (!cpool[i].alg)
> +			break;
> +	}
> +	if (i >= CPOOL_SIZE) {
> +		ret = -ENOSPC;
> +		goto out;
> +	}
> +
> +	ret = __cpool_alloc_ahash(&cpool[i], alg);
> +	if (!ret) {
> +		ret = i;
> +		if (i == cpool_populated)
> +			cpool_populated++;
> +	}
> +out:
> +	mutex_unlock(&cpool_mutex);
> +	return ret;
> +}
> +EXPORT_SYMBOL_GPL(crypto_pool_alloc_ahash);

> +/**
> + * crypto_pool_add - increases number of users (refcounter) for a pool
> + * @id: crypto_pool that was previously allocated by crypto_pool_alloc_ahash()
> + */
> +void crypto_pool_add(unsigned int id)
> +{
> +	if (WARN_ON_ONCE(id > cpool_populated || !cpool[id].alg))
> +		return;
> +	kref_get(&cpool[id].kref);
> +}
> +EXPORT_SYMBOL_GPL(crypto_pool_add);
> +
> +/**
> + * crypto_pool_get - disable bh and start using crypto_pool
> + * @id: crypto_pool that was previously allocated by crypto_pool_alloc_ahash()
> + * @c: returned crypto_pool for usage (uninitialized on failure)
> + */
> +int crypto_pool_get(unsigned int id, struct crypto_pool *c)

Is there a precedent somewhere for the _add() and _get() semantics
you're using here? I don't think I've seen _add() for taking a
reference, maybe _get() -> start(), _add() -> _get()?

> +{
> +	struct crypto_pool_ahash *ret = (struct crypto_pool_ahash *)c;
> +
> +	local_bh_disable();
> +	if (WARN_ON_ONCE(id > cpool_populated || !cpool[id].alg)) {
> +		local_bh_enable();
> +		return -EINVAL;
> +	}
> +	ret->req = *this_cpu_ptr(cpool[id].req);
> +	ret->base.scratch = this_cpu_read(crypto_pool_scratch);
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(crypto_pool_get);

Re: [PATCH v2 1/5] crypto: Introduce crypto_pool

[Dmitry Safonov]

Hi Jakub,

Thanks for taking a look and your review,

On 1/7/23 01:53, Jakub Kicinski wrote:
[..]
>> +config CRYPTO_POOL
>> +	tristate "Per-CPU crypto pool"
>> +	default n
>> +	help
>> +	  Per-CPU pool of crypto requests ready for usage in atomic contexts.
> 
> Let's make it a hidden symbol? It seems like a low-level library
> which gets select'ed, so no point bothering users with questions.
> 
> config CRYPTO_POOL
> 	tristate
> 
> that's it.

Sounds good

>> +static int crypto_pool_scratch_alloc(void)
> 
> This isn't called by anything in this patch..
> crypto_pool_alloc_ahash() should call it I'm guessing?

Ah, this is little historical left-over: in the beginning, I used
constant-sized area as "scratch" buffer, the way TCP-MD5 does it.
Later, while converting users to crypto_pool, I found that it would be
helpful to support simple resizing as users have different size
requirement to the temporary buffer, i.e. looking at xfrm_ipcomp, if
later it would be converted to use the same API, rather than its own:
IPCOMP_SCRATCH_SIZE is huge (which may help to save quite some memory if
shared with other crypto_pool users: as the buffer is as well protected
by bh-disabled section, the usage pattern is quite the same).

In patch 2 I rewrote it for crypto_pool_reserve_scratch(). The purpose
of patch 2 was to only add dynamic up-sizing of this buffer to make it
easier to review the change. So, here are 2 options:
- I can move scratch area allocation/resizing/freeing to patch2 for v3
- Or I can keep patch 2 for only adding the resizing functionality, but
in patch 1 make crypto_pool_scratch_alloc() non-static and to the header
API.

What would you prefer?

[..]
>> +out_free:
>> +	if (!IS_ERR_OR_NULL(hash) && e->needs_key)
>> +		crypto_free_ahash(hash);
>> +
>> +	for_each_possible_cpu(cpu) {
>> +		if (*per_cpu_ptr(e->req, cpu) == NULL)
>> +			break;
>> +		hash = crypto_ahash_reqtfm(*per_cpu_ptr(e->req, cpu));
> 
> Could you use a local variable here instead of @hash?
> That way you won't need the two separate free_ahash()
> one before and one after the loop..

Good idea, will do

> 
>> +		ahash_request_free(*per_cpu_ptr(e->req, cpu));
> 
> I think using @req here would be beneficial as well :S
> 
>> +		if (e->needs_key) {
>> +			crypto_free_ahash(hash);
>> +			hash = NULL;
>> +		}
>> +	}
>> +
>> +	if (hash)
>> +		crypto_free_ahash(hash);
> 
> This error handling is tricky as hell, please just add a separate
> variable to hold the 

Agree, will do for v3

>> +out_free_req:
>> +	free_percpu(e->req);
>> +out_free_alg:
>> +	kfree(e->alg);
>> +	e->alg = NULL;
>> +	return ret;
>> +}
>> +
>> +/**
>> + * crypto_pool_alloc_ahash - allocates pool for ahash requests
>> + * @alg: name of async hash algorithm
>> + */
>> +int crypto_pool_alloc_ahash(const char *alg)
>> +{
>> +	int i, ret;
>> +
>> +	/* slow-path */
>> +	mutex_lock(&cpool_mutex);
>> +
>> +	for (i = 0; i < cpool_populated; i++) {
>> +		if (cpool[i].alg && !strcmp(cpool[i].alg, alg)) {
>> +			if (kref_read(&cpool[i].kref) > 0) {
> 
> In the current design we can as well resurrect a pool waiting to 
> be destroyed, right? Just reinit the ref and we're good.
> 
> Otherwise the read() + get() looks quite suspicious to a reader.

Yes, unsure why I haven't done it from the beginning

[..]
>> +/**
>> + * crypto_pool_add - increases number of users (refcounter) for a pool
>> + * @id: crypto_pool that was previously allocated by crypto_pool_alloc_ahash()
>> + */
>> +void crypto_pool_add(unsigned int id)
>> +{
>> +	if (WARN_ON_ONCE(id > cpool_populated || !cpool[id].alg))
>> +		return;
>> +	kref_get(&cpool[id].kref);
>> +}
>> +EXPORT_SYMBOL_GPL(crypto_pool_add);
>> +
>> +/**
>> + * crypto_pool_get - disable bh and start using crypto_pool
>> + * @id: crypto_pool that was previously allocated by crypto_pool_alloc_ahash()
>> + * @c: returned crypto_pool for usage (uninitialized on failure)
>> + */
>> +int crypto_pool_get(unsigned int id, struct crypto_pool *c)
> 
> Is there a precedent somewhere for the _add() and _get() semantics
> you're using here? I don't think I've seen _add() for taking a
> reference, maybe _get() -> start(), _add() -> _get()?

Yeah, I presume I took not the best-fitting naming from
tcp_get_md5sig_pool()/tcp_put_md5sig_pool().
Will do the renaming.

Thanks,
          Dmitry

Re: [PATCH v2 1/5] crypto: Introduce crypto_pool

[Dmitry Safonov]

On 1/9/23 20:59, Dmitry Safonov wrote:
> Hi Jakub,
> 
> Thanks for taking a look and your review,
> 
> On 1/7/23 01:53, Jakub Kicinski wrote:
[..]
>>> +static int crypto_pool_scratch_alloc(void)
>>
>> This isn't called by anything in this patch..
>> crypto_pool_alloc_ahash() should call it I'm guessing?
> 
> Ah, this is little historical left-over: in the beginning, I used
> constant-sized area as "scratch" buffer, the way TCP-MD5 does it.
> Later, while converting users to crypto_pool, I found that it would be
> helpful to support simple resizing as users have different size
> requirement to the temporary buffer, i.e. looking at xfrm_ipcomp, if
> later it would be converted to use the same API, rather than its own:
> IPCOMP_SCRATCH_SIZE is huge (which may help to save quite some memory if
> shared with other crypto_pool users: as the buffer is as well protected
> by bh-disabled section, the usage pattern is quite the same).
> 
> In patch 2 I rewrote it for crypto_pool_reserve_scratch(). The purpose
> of patch 2 was to only add dynamic up-sizing of this buffer to make it
> easier to review the change. So, here are 2 options:
> - I can move scratch area allocation/resizing/freeing to patch2 for v3
> - Or I can keep patch 2 for only adding the resizing functionality, but
> in patch 1 make crypto_pool_scratch_alloc() non-static and to the header
> API.
> 
> What would you prefer?

Taking the question off: in v3 I'll provide "size" as another argument
in patch 2 (the way you suggested it in review for patch 2). That way
dynamic allocation would be still separated in patch 2.

Thanks,
          Dmitry

[PATCH v2 2/5] crypto/pool: Add crypto_pool_reserve_scratch()

[Dmitry Safonov]

Instead of having build-time hardcoded constant, reallocate scratch
area, if needed by user. Different algos, different users may need
different size of temp per-CPU buffer. Only up-sizing supported for
simplicity.

Signed-off-by: Dmitry Safonov <dima@arista.com>
---
 crypto/Kconfig        |  6 ++++
 crypto/crypto_pool.c  | 77 ++++++++++++++++++++++++++++++++++---------
 include/crypto/pool.h |  3 +-
 3 files changed, 69 insertions(+), 17 deletions(-)

diff --git a/crypto/Kconfig b/crypto/Kconfig
index ba8d4a1f10f9..0614c2acfffa 100644
--- a/crypto/Kconfig
+++ b/crypto/Kconfig
@@ -1394,6 +1394,12 @@ config CRYPTO_POOL
 	help
 	  Per-CPU pool of crypto requests ready for usage in atomic contexts.
 
+config CRYPTO_POOL_DEFAULT_SCRATCH_SIZE
+	hex "Per-CPU default scratch area size"
+	depends on CRYPTO_POOL
+	default 0x100
+	range 0x100 0x10000
+
 if !KMSAN # avoid false positives from assembly
 if ARM
 source "arch/arm/crypto/Kconfig"
diff --git a/crypto/crypto_pool.c b/crypto/crypto_pool.c
index 37131952c5a7..0cd9eade7b73 100644
--- a/crypto/crypto_pool.c
+++ b/crypto/crypto_pool.c
@@ -1,13 +1,14 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 
 #include <crypto/pool.h>
+#include <linux/cpu.h>
 #include <linux/kref.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/percpu.h>
 #include <linux/workqueue.h>
 
-static unsigned long scratch_size = DEFAULT_CRYPTO_POOL_SCRATCH_SZ;
+static unsigned long scratch_size = CONFIG_CRYPTO_POOL_DEFAULT_SCRATCH_SIZE;
 static DEFINE_PER_CPU(void *, crypto_pool_scratch);
 
 struct crypto_pool_entry {
@@ -22,26 +23,69 @@ static struct crypto_pool_entry cpool[CPOOL_SIZE];
 static unsigned int cpool_populated;
 static DEFINE_MUTEX(cpool_mutex);
 
-static int crypto_pool_scratch_alloc(void)
+/* Slow-path */
+/**
+ * crypto_pool_reserve_scratch - re-allocates scratch buffer, slow-path
+ * @size: request size for the scratch/temp buffer
+ */
+int crypto_pool_reserve_scratch(unsigned long size)
 {
-	int cpu;
-
-	lockdep_assert_held(&cpool_mutex);
+#define FREE_BATCH_SIZE		64
+	void *free_batch[FREE_BATCH_SIZE];
+	int cpu, err = 0;
+	unsigned int i = 0;
 
+	mutex_lock(&cpool_mutex);
+	if (size == scratch_size) {
+		for_each_possible_cpu(cpu) {
+			if (per_cpu(crypto_pool_scratch, cpu))
+				continue;
+			goto allocate_scratch;
+		}
+		mutex_unlock(&cpool_mutex);
+		return 0;
+	}
+allocate_scratch:
+	size = max(size, scratch_size);
+	cpus_read_lock();
 	for_each_possible_cpu(cpu) {
-		void *scratch = per_cpu(crypto_pool_scratch, cpu);
+		void *scratch, *old_scratch;
 
-		if (scratch)
+		scratch = kmalloc_node(size, GFP_KERNEL, cpu_to_node(cpu));
+		if (!scratch) {
+			err = -ENOMEM;
+			break;
+		}
+
+		old_scratch = per_cpu(crypto_pool_scratch, cpu);
+		/* Pairs with crypto_pool_get() */
+		WRITE_ONCE(*per_cpu_ptr(&crypto_pool_scratch, cpu), scratch);
+		if (!cpu_online(cpu)) {
+			kfree(old_scratch);
 			continue;
+		}
+		free_batch[i++] = old_scratch;
+		if (i == FREE_BATCH_SIZE) {
+			cpus_read_unlock();
+			synchronize_rcu();
+			while (i > 0)
+				kfree(free_batch[--i]);
+			cpus_read_lock();
+		}
+	}
+	cpus_read_unlock();
+	if (!err)
+		scratch_size = size;
+	mutex_unlock(&cpool_mutex);
 
-		scratch = kmalloc_node(scratch_size, GFP_KERNEL,
-				       cpu_to_node(cpu));
-		if (!scratch)
-			return -ENOMEM;
-		per_cpu(crypto_pool_scratch, cpu) = scratch;
+	if (i > 0) {
+		synchronize_rcu();
+		while (i > 0)
+			kfree(free_batch[--i]);
 	}
-	return 0;
+	return err;
 }
+EXPORT_SYMBOL_GPL(crypto_pool_reserve_scratch);
 
 static void crypto_pool_scratch_free(void)
 {
@@ -138,7 +182,6 @@ int crypto_pool_alloc_ahash(const char *alg)
 
 	/* slow-path */
 	mutex_lock(&cpool_mutex);
-
 	for (i = 0; i < cpool_populated; i++) {
 		if (cpool[i].alg && !strcmp(cpool[i].alg, alg)) {
 			if (kref_read(&cpool[i].kref) > 0) {
@@ -263,7 +306,11 @@ int crypto_pool_get(unsigned int id, struct crypto_pool *c)
 		return -EINVAL;
 	}
 	ret->req = *this_cpu_ptr(cpool[id].req);
-	ret->base.scratch = this_cpu_read(crypto_pool_scratch);
+	/*
+	 * Pairs with crypto_pool_reserve_scratch(), scartch area is
+	 * valid (allocated) until crypto_pool_put().
+	 */
+	ret->base.scratch = READ_ONCE(*this_cpu_ptr(&crypto_pool_scratch));
 	return 0;
 }
 EXPORT_SYMBOL_GPL(crypto_pool_get);
diff --git a/include/crypto/pool.h b/include/crypto/pool.h
index 2c61aa45faff..c7d817860cc3 100644
--- a/include/crypto/pool.h
+++ b/include/crypto/pool.h
@@ -4,8 +4,6 @@
 
 #include <crypto/hash.h>
 
-#define DEFAULT_CRYPTO_POOL_SCRATCH_SZ	128
-
 struct crypto_pool {
 	void *scratch;
 };
@@ -20,6 +18,7 @@ struct crypto_pool_ahash {
 	struct ahash_request *req;
 };
 
+int crypto_pool_reserve_scratch(unsigned long size);
 int crypto_pool_alloc_ahash(const char *alg);
 void crypto_pool_add(unsigned int id);
 void crypto_pool_release(unsigned int id);
-- 
2.39.0

Re: [PATCH v2 2/5] crypto/pool: Add crypto_pool_reserve_scratch()

[Jakub Kicinski]

On Tue,  3 Jan 2023 18:42:54 +0000 Dmitry Safonov wrote:
> Instead of having build-time hardcoded constant, reallocate scratch
> area, if needed by user. Different algos, different users may need
> different size of temp per-CPU buffer. Only up-sizing supported for
> simplicity.

> -static int crypto_pool_scratch_alloc(void)
> +/* Slow-path */
> +/**
> + * crypto_pool_reserve_scratch - re-allocates scratch buffer, slow-path
> + * @size: request size for the scratch/temp buffer
> + */
> +int crypto_pool_reserve_scratch(unsigned long size)

Does this have to be a separate call? Can't we make it part of 
the pool allocation? AFAICT the scratch gets freed when last
pool is freed, so the user needs to know to allocate the pool
_first_ otherwise there's a potential race:

 CPU 1               CPU 2

 alloc pool
                    set scratch
 free pool
 [frees scratch]
                    alloc pool

>  {
> -	int cpu;
> -
> -	lockdep_assert_held(&cpool_mutex);
> +#define FREE_BATCH_SIZE		64
> +	void *free_batch[FREE_BATCH_SIZE];
> +	int cpu, err = 0;
> +	unsigned int i = 0;
>  
> +	mutex_lock(&cpool_mutex);
> +	if (size == scratch_size) {
> +		for_each_possible_cpu(cpu) {
> +			if (per_cpu(crypto_pool_scratch, cpu))
> +				continue;
> +			goto allocate_scratch;
> +		}
> +		mutex_unlock(&cpool_mutex);
> +		return 0;
> +	}
> +allocate_scratch:
> +	size = max(size, scratch_size);
> +	cpus_read_lock();
>  	for_each_possible_cpu(cpu) {
> -		void *scratch = per_cpu(crypto_pool_scratch, cpu);
> +		void *scratch, *old_scratch;
>  
> -		if (scratch)
> +		scratch = kmalloc_node(size, GFP_KERNEL, cpu_to_node(cpu));
> +		if (!scratch) {
> +			err = -ENOMEM;
> +			break;
> +		}
> +
> +		old_scratch = per_cpu(crypto_pool_scratch, cpu);
> +		/* Pairs with crypto_pool_get() */
> +		WRITE_ONCE(*per_cpu_ptr(&crypto_pool_scratch, cpu), scratch);

You're using RCU for protection here, please use rcu accessors.

> +		if (!cpu_online(cpu)) {
> +			kfree(old_scratch);
>  			continue;
> +		}
> +		free_batch[i++] = old_scratch;
> +		if (i == FREE_BATCH_SIZE) {
> +			cpus_read_unlock();
> +			synchronize_rcu();
> +			while (i > 0)
> +				kfree(free_batch[--i]);
> +			cpus_read_lock();
> +		}

This is a memory allocation routine, can we simplify this by
dynamically sizing "free_batch" and using call_rcu()?

struct humf_blah {
	struct rcu_head rcu;
	unsigned int cnt;
	void *data[];
};

cheezit = kmalloc(struct_size(blah, data, num_possible_cpus()));

for_each ..
	cheezit->data[cheezit->cnt++] = old_scratch;

call_rcu(&cheezit->rcu, my_free_them_scratches)

etc.

Feels like that'd be much less locking, unlocking and general
carefully'ing.

> +	}
> +	cpus_read_unlock();
> +	if (!err)
> +		scratch_size = size;

Re: [PATCH v2 2/5] crypto/pool: Add crypto_pool_reserve_scratch()

[Dmitry Safonov]

On 1/7/23 02:04, Jakub Kicinski wrote:
> On Tue,  3 Jan 2023 18:42:54 +0000 Dmitry Safonov wrote:
>> Instead of having build-time hardcoded constant, reallocate scratch
>> area, if needed by user. Different algos, different users may need
>> different size of temp per-CPU buffer. Only up-sizing supported for
>> simplicity.
> 
>> -static int crypto_pool_scratch_alloc(void)
>> +/* Slow-path */
>> +/**
>> + * crypto_pool_reserve_scratch - re-allocates scratch buffer, slow-path
>> + * @size: request size for the scratch/temp buffer
>> + */
>> +int crypto_pool_reserve_scratch(unsigned long size)
> 
> Does this have to be a separate call? Can't we make it part of 
> the pool allocation? AFAICT the scratch gets freed when last
> pool is freed, so the user needs to know to allocate the pool
> _first_ otherwise there's a potential race:
> 
>  CPU 1               CPU 2
> 
>  alloc pool
>                     set scratch
>  free pool
>  [frees scratch]
>                     alloc pool

Yeah, I think it will be cleaner if it was an argument for
crypto_pool_alloc_*() and would prevent potential misuse as you
describe. Which also means that I don't have to declare
crypto_pool_scratch_alloc() in patch 1, will just add a new parameter in
this patch to alloc function.

> 
>>  {
>> -	int cpu;
>> -
>> -	lockdep_assert_held(&cpool_mutex);
>> +#define FREE_BATCH_SIZE		64
>> +	void *free_batch[FREE_BATCH_SIZE];
>> +	int cpu, err = 0;
>> +	unsigned int i = 0;
>>  
>> +	mutex_lock(&cpool_mutex);
>> +	if (size == scratch_size) {
>> +		for_each_possible_cpu(cpu) {
>> +			if (per_cpu(crypto_pool_scratch, cpu))
>> +				continue;
>> +			goto allocate_scratch;
>> +		}
>> +		mutex_unlock(&cpool_mutex);
>> +		return 0;
>> +	}
>> +allocate_scratch:
>> +	size = max(size, scratch_size);
>> +	cpus_read_lock();
>>  	for_each_possible_cpu(cpu) {
>> -		void *scratch = per_cpu(crypto_pool_scratch, cpu);
>> +		void *scratch, *old_scratch;
>>  
>> -		if (scratch)
>> +		scratch = kmalloc_node(size, GFP_KERNEL, cpu_to_node(cpu));
>> +		if (!scratch) {
>> +			err = -ENOMEM;
>> +			break;
>> +		}
>> +
>> +		old_scratch = per_cpu(crypto_pool_scratch, cpu);
>> +		/* Pairs with crypto_pool_get() */
>> +		WRITE_ONCE(*per_cpu_ptr(&crypto_pool_scratch, cpu), scratch);
> 
> You're using RCU for protection here, please use rcu accessors.

Will do.

> 
>> +		if (!cpu_online(cpu)) {
>> +			kfree(old_scratch);
>>  			continue;
>> +		}
>> +		free_batch[i++] = old_scratch;
>> +		if (i == FREE_BATCH_SIZE) {
>> +			cpus_read_unlock();
>> +			synchronize_rcu();
>> +			while (i > 0)
>> +				kfree(free_batch[--i]);
>> +			cpus_read_lock();
>> +		}
> 
> This is a memory allocation routine, can we simplify this by
> dynamically sizing "free_batch" and using call_rcu()?
> 
> struct humf_blah {
> 	struct rcu_head rcu;
> 	unsigned int cnt;
> 	void *data[];
> };
> 
> cheezit = kmalloc(struct_size(blah, data, num_possible_cpus()));
> 
> for_each ..
> 	cheezit->data[cheezit->cnt++] = old_scratch;
> 
> call_rcu(&cheezit->rcu, my_free_them_scratches)
> 
> etc.
> 
> Feels like that'd be much less locking, unlocking and general
> carefully'ing.

Will give it a try for v3, thanks for the idea and review,
          Dmitry

[PATCH v2 3/5] crypto/net/tcp: Use crypto_pool for TCP-MD5

[Dmitry Safonov]

Use crypto_pool API that was designed with tcp_md5sig_pool in mind.
The conversion to use crypto_pool will allow:
- to reuse ahash_request(s) for different users
- to allocate only one per-CPU scratch buffer rather than a new one for
  each user
- to have a common API for net/ users that need ahash on RX/TX fast path

Signed-off-by: Dmitry Safonov <dima@arista.com>
---
 include/net/tcp.h        |  24 +++------
 net/ipv4/Kconfig         |   2 +-
 net/ipv4/tcp.c           | 105 ++++++++++-----------------------------
 net/ipv4/tcp_ipv4.c      |  92 ++++++++++++++++++++--------------
 net/ipv4/tcp_minisocks.c |  21 +++++---
 net/ipv6/tcp_ipv6.c      |  53 +++++++++-----------
 6 files changed, 129 insertions(+), 168 deletions(-)

diff --git a/include/net/tcp.h b/include/net/tcp.h
index db9f828e9d1e..048057cb4c2e 100644
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -1664,12 +1664,6 @@ union tcp_md5sum_block {
 #endif
 };
 
-/* - pool: digest algorithm, hash description and scratch buffer */
-struct tcp_md5sig_pool {
-	struct ahash_request	*md5_req;
-	void			*scratch;
-};
-
 /* - functions */
 int tcp_v4_md5_hash_skb(char *md5_hash, const struct tcp_md5sig_key *key,
 			const struct sock *sk, const struct sk_buff *skb);
@@ -1725,17 +1719,15 @@ tcp_inbound_md5_hash(const struct sock *sk, const struct sk_buff *skb,
 #define tcp_twsk_md5_key(twsk)	NULL
 #endif
 
-bool tcp_alloc_md5sig_pool(void);
-
-struct tcp_md5sig_pool *tcp_get_md5sig_pool(void);
-static inline void tcp_put_md5sig_pool(void)
-{
-	local_bh_enable();
-}
+struct crypto_pool_ahash;
+int tcp_md5_alloc_crypto_pool(void);
+void tcp_md5_release_crypto_pool(void);
+void tcp_md5_add_crypto_pool(void);
+extern int tcp_md5_crypto_pool_id;
 
-int tcp_md5_hash_skb_data(struct tcp_md5sig_pool *, const struct sk_buff *,
-			  unsigned int header_len);
-int tcp_md5_hash_key(struct tcp_md5sig_pool *hp,
+int tcp_md5_hash_skb_data(struct crypto_pool_ahash *hp,
+			  const struct sk_buff *skb, unsigned int header_len);
+int tcp_md5_hash_key(struct crypto_pool_ahash *hp,
 		     const struct tcp_md5sig_key *key);
 
 /* From tcp_fastopen.c */
diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig
index 2dfb12230f08..46e8bdb749df 100644
--- a/net/ipv4/Kconfig
+++ b/net/ipv4/Kconfig
@@ -743,7 +743,7 @@ config DEFAULT_TCP_CONG
 
 config TCP_MD5SIG
 	bool "TCP: MD5 Signature Option support (RFC2385)"
-	select CRYPTO
+	select CRYPTO_POOL
 	select CRYPTO_MD5
 	help
 	  RFC2385 specifies a method of giving MD5 protection to TCP sessions.
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index c567d5e8053e..b06a21949cf0 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -244,6 +244,7 @@
 #define pr_fmt(fmt) "TCP: " fmt
 
 #include <crypto/hash.h>
+#include <crypto/pool.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/types.h>
@@ -4411,98 +4412,45 @@ int tcp_getsockopt(struct sock *sk, int level, int optname, char __user *optval,
 EXPORT_SYMBOL(tcp_getsockopt);
 
 #ifdef CONFIG_TCP_MD5SIG
-static DEFINE_PER_CPU(struct tcp_md5sig_pool, tcp_md5sig_pool);
-static DEFINE_MUTEX(tcp_md5sig_mutex);
-static bool tcp_md5sig_pool_populated = false;
+int tcp_md5_crypto_pool_id = -1;
+EXPORT_SYMBOL(tcp_md5_crypto_pool_id);
 
-static void __tcp_alloc_md5sig_pool(void)
+int tcp_md5_alloc_crypto_pool(void)
 {
-	struct crypto_ahash *hash;
-	int cpu;
-
-	hash = crypto_alloc_ahash("md5", 0, CRYPTO_ALG_ASYNC);
-	if (IS_ERR(hash))
-		return;
-
-	for_each_possible_cpu(cpu) {
-		void *scratch = per_cpu(tcp_md5sig_pool, cpu).scratch;
-		struct ahash_request *req;
-
-		if (!scratch) {
-			scratch = kmalloc_node(sizeof(union tcp_md5sum_block) +
-					       sizeof(struct tcphdr),
-					       GFP_KERNEL,
-					       cpu_to_node(cpu));
-			if (!scratch)
-				return;
-			per_cpu(tcp_md5sig_pool, cpu).scratch = scratch;
-		}
-		if (per_cpu(tcp_md5sig_pool, cpu).md5_req)
-			continue;
-
-		req = ahash_request_alloc(hash, GFP_KERNEL);
-		if (!req)
-			return;
+	int ret;
 
-		ahash_request_set_callback(req, 0, NULL, NULL);
+	ret = crypto_pool_reserve_scratch(sizeof(union tcp_md5sum_block) +
+					  sizeof(struct tcphdr));
+	if (ret)
+		return ret;
 
-		per_cpu(tcp_md5sig_pool, cpu).md5_req = req;
+	ret = crypto_pool_alloc_ahash("md5");
+	if (ret >= 0) {
+		tcp_md5_crypto_pool_id = ret;
+		return 0;
 	}
-	/* before setting tcp_md5sig_pool_populated, we must commit all writes
-	 * to memory. See smp_rmb() in tcp_get_md5sig_pool()
-	 */
-	smp_wmb();
-	/* Paired with READ_ONCE() from tcp_alloc_md5sig_pool()
-	 * and tcp_get_md5sig_pool().
-	*/
-	WRITE_ONCE(tcp_md5sig_pool_populated, true);
+	return ret;
 }
+EXPORT_SYMBOL(tcp_md5_alloc_crypto_pool);
 
-bool tcp_alloc_md5sig_pool(void)
+void tcp_md5_release_crypto_pool(void)
 {
-	/* Paired with WRITE_ONCE() from __tcp_alloc_md5sig_pool() */
-	if (unlikely(!READ_ONCE(tcp_md5sig_pool_populated))) {
-		mutex_lock(&tcp_md5sig_mutex);
-
-		if (!tcp_md5sig_pool_populated)
-			__tcp_alloc_md5sig_pool();
-
-		mutex_unlock(&tcp_md5sig_mutex);
-	}
-	/* Paired with WRITE_ONCE() from __tcp_alloc_md5sig_pool() */
-	return READ_ONCE(tcp_md5sig_pool_populated);
+	crypto_pool_release(tcp_md5_crypto_pool_id);
 }
-EXPORT_SYMBOL(tcp_alloc_md5sig_pool);
+EXPORT_SYMBOL(tcp_md5_release_crypto_pool);
 
-
-/**
- *	tcp_get_md5sig_pool - get md5sig_pool for this user
- *
- *	We use percpu structure, so if we succeed, we exit with preemption
- *	and BH disabled, to make sure another thread or softirq handling
- *	wont try to get same context.
- */
-struct tcp_md5sig_pool *tcp_get_md5sig_pool(void)
+void tcp_md5_add_crypto_pool(void)
 {
-	local_bh_disable();
-
-	/* Paired with WRITE_ONCE() from __tcp_alloc_md5sig_pool() */
-	if (READ_ONCE(tcp_md5sig_pool_populated)) {
-		/* coupled with smp_wmb() in __tcp_alloc_md5sig_pool() */
-		smp_rmb();
-		return this_cpu_ptr(&tcp_md5sig_pool);
-	}
-	local_bh_enable();
-	return NULL;
+	crypto_pool_add(tcp_md5_crypto_pool_id);
 }
-EXPORT_SYMBOL(tcp_get_md5sig_pool);
+EXPORT_SYMBOL(tcp_md5_add_crypto_pool);
 
-int tcp_md5_hash_skb_data(struct tcp_md5sig_pool *hp,
+int tcp_md5_hash_skb_data(struct crypto_pool_ahash *hp,
 			  const struct sk_buff *skb, unsigned int header_len)
 {
 	struct scatterlist sg;
 	const struct tcphdr *tp = tcp_hdr(skb);
-	struct ahash_request *req = hp->md5_req;
+	struct ahash_request *req = hp->req;
 	unsigned int i;
 	const unsigned int head_data_len = skb_headlen(skb) > header_len ?
 					   skb_headlen(skb) - header_len : 0;
@@ -4536,16 +4484,17 @@ int tcp_md5_hash_skb_data(struct tcp_md5sig_pool *hp,
 }
 EXPORT_SYMBOL(tcp_md5_hash_skb_data);
 
-int tcp_md5_hash_key(struct tcp_md5sig_pool *hp, const struct tcp_md5sig_key *key)
+int tcp_md5_hash_key(struct crypto_pool_ahash *hp,
+		     const struct tcp_md5sig_key *key)
 {
 	u8 keylen = READ_ONCE(key->keylen); /* paired with WRITE_ONCE() in tcp_md5_do_add */
 	struct scatterlist sg;
 
 	sg_init_one(&sg, key->key, keylen);
-	ahash_request_set_crypt(hp->md5_req, &sg, NULL, keylen);
+	ahash_request_set_crypt(hp->req, &sg, NULL, keylen);
 
 	/* We use data_race() because tcp_md5_do_add() might change key->key under us */
-	return data_race(crypto_ahash_update(hp->md5_req));
+	return data_race(crypto_ahash_update(hp->req));
 }
 EXPORT_SYMBOL(tcp_md5_hash_key);
 
diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index 8320d0ecb13a..93273b9a2948 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -79,6 +79,7 @@
 #include <linux/btf_ids.h>
 
 #include <crypto/hash.h>
+#include <crypto/pool.h>
 #include <linux/scatterlist.h>
 
 #include <trace/events/tcp.h>
@@ -1212,10 +1213,6 @@ static int __tcp_md5_do_add(struct sock *sk, const union tcp_md5_addr *addr,
 	key = sock_kmalloc(sk, sizeof(*key), gfp | __GFP_ZERO);
 	if (!key)
 		return -ENOMEM;
-	if (!tcp_alloc_md5sig_pool()) {
-		sock_kfree_s(sk, key, sizeof(*key));
-		return -ENOMEM;
-	}
 
 	memcpy(key->key, newkey, newkeylen);
 	key->keylen = newkeylen;
@@ -1237,8 +1234,13 @@ int tcp_md5_do_add(struct sock *sk, const union tcp_md5_addr *addr,
 	struct tcp_sock *tp = tcp_sk(sk);
 
 	if (!rcu_dereference_protected(tp->md5sig_info, lockdep_sock_is_held(sk))) {
-		if (tcp_md5sig_info_add(sk, GFP_KERNEL))
+		if (tcp_md5_alloc_crypto_pool())
+			return -ENOMEM;
+
+		if (tcp_md5sig_info_add(sk, GFP_KERNEL)) {
+			tcp_md5_release_crypto_pool();
 			return -ENOMEM;
+		}
 
 		if (!static_branch_inc(&tcp_md5_needed.key)) {
 			struct tcp_md5sig_info *md5sig;
@@ -1246,6 +1248,7 @@ int tcp_md5_do_add(struct sock *sk, const union tcp_md5_addr *addr,
 			md5sig = rcu_dereference_protected(tp->md5sig_info, lockdep_sock_is_held(sk));
 			rcu_assign_pointer(tp->md5sig_info, NULL);
 			kfree_rcu(md5sig, rcu);
+			tcp_md5_release_crypto_pool();
 			return -EUSERS;
 		}
 	}
@@ -1262,8 +1265,12 @@ int tcp_md5_key_copy(struct sock *sk, const union tcp_md5_addr *addr,
 	struct tcp_sock *tp = tcp_sk(sk);
 
 	if (!rcu_dereference_protected(tp->md5sig_info, lockdep_sock_is_held(sk))) {
-		if (tcp_md5sig_info_add(sk, sk_gfp_mask(sk, GFP_ATOMIC)))
+		tcp_md5_add_crypto_pool();
+
+		if (tcp_md5sig_info_add(sk, sk_gfp_mask(sk, GFP_ATOMIC))) {
+			tcp_md5_release_crypto_pool();
 			return -ENOMEM;
+		}
 
 		if (!static_key_fast_inc_not_disabled(&tcp_md5_needed.key.key)) {
 			struct tcp_md5sig_info *md5sig;
@@ -1272,6 +1279,7 @@ int tcp_md5_key_copy(struct sock *sk, const union tcp_md5_addr *addr,
 			net_warn_ratelimited("Too many TCP-MD5 keys in the system\n");
 			rcu_assign_pointer(tp->md5sig_info, NULL);
 			kfree_rcu(md5sig, rcu);
+			tcp_md5_release_crypto_pool();
 			return -EUSERS;
 		}
 	}
@@ -1371,7 +1379,7 @@ static int tcp_v4_parse_md5_keys(struct sock *sk, int optname,
 			      cmd.tcpm_key, cmd.tcpm_keylen);
 }
 
-static int tcp_v4_md5_hash_headers(struct tcp_md5sig_pool *hp,
+static int tcp_v4_md5_hash_headers(struct crypto_pool_ahash *hp,
 				   __be32 daddr, __be32 saddr,
 				   const struct tcphdr *th, int nbytes)
 {
@@ -1379,7 +1387,7 @@ static int tcp_v4_md5_hash_headers(struct tcp_md5sig_pool *hp,
 	struct scatterlist sg;
 	struct tcphdr *_th;
 
-	bp = hp->scratch;
+	bp = hp->base.scratch;
 	bp->saddr = saddr;
 	bp->daddr = daddr;
 	bp->pad = 0;
@@ -1391,37 +1399,34 @@ static int tcp_v4_md5_hash_headers(struct tcp_md5sig_pool *hp,
 	_th->check = 0;
 
 	sg_init_one(&sg, bp, sizeof(*bp) + sizeof(*th));
-	ahash_request_set_crypt(hp->md5_req, &sg, NULL,
+	ahash_request_set_crypt(hp->req, &sg, NULL,
 				sizeof(*bp) + sizeof(*th));
-	return crypto_ahash_update(hp->md5_req);
+	return crypto_ahash_update(hp->req);
 }
 
 static int tcp_v4_md5_hash_hdr(char *md5_hash, const struct tcp_md5sig_key *key,
 			       __be32 daddr, __be32 saddr, const struct tcphdr *th)
 {
-	struct tcp_md5sig_pool *hp;
-	struct ahash_request *req;
+	struct crypto_pool_ahash hp;
 
-	hp = tcp_get_md5sig_pool();
-	if (!hp)
+	if (crypto_pool_get(tcp_md5_crypto_pool_id, (struct crypto_pool *)&hp))
 		goto clear_hash_noput;
-	req = hp->md5_req;
 
-	if (crypto_ahash_init(req))
+	if (crypto_ahash_init(hp.req))
 		goto clear_hash;
-	if (tcp_v4_md5_hash_headers(hp, daddr, saddr, th, th->doff << 2))
+	if (tcp_v4_md5_hash_headers(&hp, daddr, saddr, th, th->doff << 2))
 		goto clear_hash;
-	if (tcp_md5_hash_key(hp, key))
+	if (tcp_md5_hash_key(&hp, key))
 		goto clear_hash;
-	ahash_request_set_crypt(req, NULL, md5_hash, 0);
-	if (crypto_ahash_final(req))
+	ahash_request_set_crypt(hp.req, NULL, md5_hash, 0);
+	if (crypto_ahash_final(hp.req))
 		goto clear_hash;
 
-	tcp_put_md5sig_pool();
+	crypto_pool_put();
 	return 0;
 
 clear_hash:
-	tcp_put_md5sig_pool();
+	crypto_pool_put();
 clear_hash_noput:
 	memset(md5_hash, 0, 16);
 	return 1;
@@ -1431,8 +1436,7 @@ int tcp_v4_md5_hash_skb(char *md5_hash, const struct tcp_md5sig_key *key,
 			const struct sock *sk,
 			const struct sk_buff *skb)
 {
-	struct tcp_md5sig_pool *hp;
-	struct ahash_request *req;
+	struct crypto_pool_ahash hp;
 	const struct tcphdr *th = tcp_hdr(skb);
 	__be32 saddr, daddr;
 
@@ -1445,29 +1449,27 @@ int tcp_v4_md5_hash_skb(char *md5_hash, const struct tcp_md5sig_key *key,
 		daddr = iph->daddr;
 	}
 
-	hp = tcp_get_md5sig_pool();
-	if (!hp)
+	if (crypto_pool_get(tcp_md5_crypto_pool_id, (struct crypto_pool *)&hp))
 		goto clear_hash_noput;
-	req = hp->md5_req;
 
-	if (crypto_ahash_init(req))
+	if (crypto_ahash_init(hp.req))
 		goto clear_hash;
 
-	if (tcp_v4_md5_hash_headers(hp, daddr, saddr, th, skb->len))
+	if (tcp_v4_md5_hash_headers(&hp, daddr, saddr, th, skb->len))
 		goto clear_hash;
-	if (tcp_md5_hash_skb_data(hp, skb, th->doff << 2))
+	if (tcp_md5_hash_skb_data(&hp, skb, th->doff << 2))
 		goto clear_hash;
-	if (tcp_md5_hash_key(hp, key))
+	if (tcp_md5_hash_key(&hp, key))
 		goto clear_hash;
-	ahash_request_set_crypt(req, NULL, md5_hash, 0);
-	if (crypto_ahash_final(req))
+	ahash_request_set_crypt(hp.req, NULL, md5_hash, 0);
+	if (crypto_ahash_final(hp.req))
 		goto clear_hash;
 
-	tcp_put_md5sig_pool();
+	crypto_pool_put();
 	return 0;
 
 clear_hash:
-	tcp_put_md5sig_pool();
+	crypto_pool_put();
 clear_hash_noput:
 	memset(md5_hash, 0, 16);
 	return 1;
@@ -2285,6 +2287,18 @@ static int tcp_v4_init_sock(struct sock *sk)
 	return 0;
 }
 
+#ifdef CONFIG_TCP_MD5SIG
+static void tcp_md5sig_info_free_rcu(struct rcu_head *head)
+{
+	struct tcp_md5sig_info *md5sig;
+
+	md5sig = container_of(head, struct tcp_md5sig_info, rcu);
+	kfree(md5sig);
+	static_branch_slow_dec_deferred(&tcp_md5_needed);
+	tcp_md5_release_crypto_pool();
+}
+#endif
+
 void tcp_v4_destroy_sock(struct sock *sk)
 {
 	struct tcp_sock *tp = tcp_sk(sk);
@@ -2309,10 +2323,12 @@ void tcp_v4_destroy_sock(struct sock *sk)
 #ifdef CONFIG_TCP_MD5SIG
 	/* Clean up the MD5 key list, if any */
 	if (tp->md5sig_info) {
+		struct tcp_md5sig_info *md5sig;
+
+		md5sig = rcu_dereference_protected(tp->md5sig_info, 1);
 		tcp_clear_md5_list(sk);
-		kfree_rcu(rcu_dereference_protected(tp->md5sig_info, 1), rcu);
-		tp->md5sig_info = NULL;
-		static_branch_slow_dec_deferred(&tcp_md5_needed);
+		call_rcu(&md5sig->rcu, tcp_md5sig_info_free_rcu);
+		rcu_assign_pointer(tp->md5sig_info, NULL);
 	}
 #endif
 
diff --git a/net/ipv4/tcp_minisocks.c b/net/ipv4/tcp_minisocks.c
index e002f2e1d4f2..b2ffda09f3b4 100644
--- a/net/ipv4/tcp_minisocks.c
+++ b/net/ipv4/tcp_minisocks.c
@@ -261,11 +261,10 @@ static void tcp_time_wait_init(struct sock *sk, struct tcp_timewait_sock *tcptw)
 		tcptw->tw_md5_key = kmemdup(key, sizeof(*key), GFP_ATOMIC);
 		if (!tcptw->tw_md5_key)
 			return;
-		if (!tcp_alloc_md5sig_pool())
-			goto out_free;
 		if (!static_key_fast_inc_not_disabled(&tcp_md5_needed.key.key))
 			goto out_free;
 	}
+	tcp_md5_add_crypto_pool();
 	return;
 out_free:
 	WARN_ON_ONCE(1);
@@ -349,16 +348,26 @@ void tcp_time_wait(struct sock *sk, int state, int timeo)
 }
 EXPORT_SYMBOL(tcp_time_wait);
 
+#ifdef CONFIG_TCP_MD5SIG
+static void tcp_md5_twsk_free_rcu(struct rcu_head *head)
+{
+	struct tcp_md5sig_key *key;
+
+	key = container_of(head, struct tcp_md5sig_key, rcu);
+	kfree(key);
+	static_branch_slow_dec_deferred(&tcp_md5_needed);
+	tcp_md5_release_crypto_pool();
+}
+#endif
+
 void tcp_twsk_destructor(struct sock *sk)
 {
 #ifdef CONFIG_TCP_MD5SIG
 	if (static_branch_unlikely(&tcp_md5_needed.key)) {
 		struct tcp_timewait_sock *twsk = tcp_twsk(sk);
 
-		if (twsk->tw_md5_key) {
-			kfree_rcu(twsk->tw_md5_key, rcu);
-			static_branch_slow_dec_deferred(&tcp_md5_needed);
-		}
+		if (twsk->tw_md5_key)
+			call_rcu(&twsk->tw_md5_key->rcu, tcp_md5_twsk_free_rcu);
 	}
 #endif
 }
diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index 11b736a76bd7..1a94b5f6d152 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -64,6 +64,7 @@
 #include <linux/seq_file.h>
 
 #include <crypto/hash.h>
+#include <crypto/pool.h>
 #include <linux/scatterlist.h>
 
 #include <trace/events/tcp.h>
@@ -672,7 +673,7 @@ static int tcp_v6_parse_md5_keys(struct sock *sk, int optname,
 			      cmd.tcpm_key, cmd.tcpm_keylen);
 }
 
-static int tcp_v6_md5_hash_headers(struct tcp_md5sig_pool *hp,
+static int tcp_v6_md5_hash_headers(struct crypto_pool_ahash *hp,
 				   const struct in6_addr *daddr,
 				   const struct in6_addr *saddr,
 				   const struct tcphdr *th, int nbytes)
@@ -681,7 +682,7 @@ static int tcp_v6_md5_hash_headers(struct tcp_md5sig_pool *hp,
 	struct scatterlist sg;
 	struct tcphdr *_th;
 
-	bp = hp->scratch;
+	bp = hp->base.scratch;
 	/* 1. TCP pseudo-header (RFC2460) */
 	bp->saddr = *saddr;
 	bp->daddr = *daddr;
@@ -693,38 +694,35 @@ static int tcp_v6_md5_hash_headers(struct tcp_md5sig_pool *hp,
 	_th->check = 0;
 
 	sg_init_one(&sg, bp, sizeof(*bp) + sizeof(*th));
-	ahash_request_set_crypt(hp->md5_req, &sg, NULL,
+	ahash_request_set_crypt(hp->req, &sg, NULL,
 				sizeof(*bp) + sizeof(*th));
-	return crypto_ahash_update(hp->md5_req);
+	return crypto_ahash_update(hp->req);
 }
 
 static int tcp_v6_md5_hash_hdr(char *md5_hash, const struct tcp_md5sig_key *key,
 			       const struct in6_addr *daddr, struct in6_addr *saddr,
 			       const struct tcphdr *th)
 {
-	struct tcp_md5sig_pool *hp;
-	struct ahash_request *req;
+	struct crypto_pool_ahash hp;
 
-	hp = tcp_get_md5sig_pool();
-	if (!hp)
+	if (crypto_pool_get(tcp_md5_crypto_pool_id, (struct crypto_pool *)&hp))
 		goto clear_hash_noput;
-	req = hp->md5_req;
 
-	if (crypto_ahash_init(req))
+	if (crypto_ahash_init(hp.req))
 		goto clear_hash;
-	if (tcp_v6_md5_hash_headers(hp, daddr, saddr, th, th->doff << 2))
+	if (tcp_v6_md5_hash_headers(&hp, daddr, saddr, th, th->doff << 2))
 		goto clear_hash;
-	if (tcp_md5_hash_key(hp, key))
+	if (tcp_md5_hash_key(&hp, key))
 		goto clear_hash;
-	ahash_request_set_crypt(req, NULL, md5_hash, 0);
-	if (crypto_ahash_final(req))
+	ahash_request_set_crypt(hp.req, NULL, md5_hash, 0);
+	if (crypto_ahash_final(hp.req))
 		goto clear_hash;
 
-	tcp_put_md5sig_pool();
+	crypto_pool_put();
 	return 0;
 
 clear_hash:
-	tcp_put_md5sig_pool();
+	crypto_pool_put();
 clear_hash_noput:
 	memset(md5_hash, 0, 16);
 	return 1;
@@ -736,8 +734,7 @@ static int tcp_v6_md5_hash_skb(char *md5_hash,
 			       const struct sk_buff *skb)
 {
 	const struct in6_addr *saddr, *daddr;
-	struct tcp_md5sig_pool *hp;
-	struct ahash_request *req;
+	struct crypto_pool_ahash hp;
 	const struct tcphdr *th = tcp_hdr(skb);
 
 	if (sk) { /* valid for establish/request sockets */
@@ -749,29 +746,27 @@ static int tcp_v6_md5_hash_skb(char *md5_hash,
 		daddr = &ip6h->daddr;
 	}
 
-	hp = tcp_get_md5sig_pool();
-	if (!hp)
+	if (crypto_pool_get(tcp_md5_crypto_pool_id, (struct crypto_pool *)&hp))
 		goto clear_hash_noput;
-	req = hp->md5_req;
 
-	if (crypto_ahash_init(req))
+	if (crypto_ahash_init(hp.req))
 		goto clear_hash;
 
-	if (tcp_v6_md5_hash_headers(hp, daddr, saddr, th, skb->len))
+	if (tcp_v6_md5_hash_headers(&hp, daddr, saddr, th, skb->len))
 		goto clear_hash;
-	if (tcp_md5_hash_skb_data(hp, skb, th->doff << 2))
+	if (tcp_md5_hash_skb_data(&hp, skb, th->doff << 2))
 		goto clear_hash;
-	if (tcp_md5_hash_key(hp, key))
+	if (tcp_md5_hash_key(&hp, key))
 		goto clear_hash;
-	ahash_request_set_crypt(req, NULL, md5_hash, 0);
-	if (crypto_ahash_final(req))
+	ahash_request_set_crypt(hp.req, NULL, md5_hash, 0);
+	if (crypto_ahash_final(hp.req))
 		goto clear_hash;
 
-	tcp_put_md5sig_pool();
+	crypto_pool_put();
 	return 0;
 
 clear_hash:
-	tcp_put_md5sig_pool();
+	crypto_pool_put();
 clear_hash_noput:
 	memset(md5_hash, 0, 16);
 	return 1;
-- 
2.39.0

Re: [PATCH v2 3/5] crypto/net/tcp: Use crypto_pool for TCP-MD5

[Jakub Kicinski]

On Tue,  3 Jan 2023 18:42:55 +0000 Dmitry Safonov wrote:
> Use crypto_pool API that was designed with tcp_md5sig_pool in mind.
> The conversion to use crypto_pool will allow:
> - to reuse ahash_request(s) for different users
> - to allocate only one per-CPU scratch buffer rather than a new one for
>   each user
> - to have a common API for net/ users that need ahash on RX/TX fast path

>  config TCP_MD5SIG
>  	bool "TCP: MD5 Signature Option support (RFC2385)"
> -	select CRYPTO
> +	select CRYPTO_POOL

Are you sure we don't need to select CRYPTO any more?
select does not resolve dependencies.

>  	select CRYPTO_MD5
>  	help
>  	  RFC2385 specifies a method of giving MD5 protection to TCP sessions.

> @@ -749,29 +746,27 @@ static int tcp_v6_md5_hash_skb(char *md5_hash,
>  		daddr = &ip6h->daddr;
>  	}
>  
> -	hp = tcp_get_md5sig_pool();
> -	if (!hp)
> +	if (crypto_pool_get(tcp_md5_crypto_pool_id, (struct crypto_pool *)&hp))

&hp.base ? To avoid the cast

>  		goto clear_hash_noput;
> -	req = hp->md5_req;
>  
> -	if (crypto_ahash_init(req))
> +	if (crypto_ahash_init(hp.req))
>  		goto clear_hash;
>  
> -	if (tcp_v6_md5_hash_headers(hp, daddr, saddr, th, skb->len))
> +	if (tcp_v6_md5_hash_headers(&hp, daddr, saddr, th, skb->len))
>  		goto clear_hash;
> -	if (tcp_md5_hash_skb_data(hp, skb, th->doff << 2))
> +	if (tcp_md5_hash_skb_data(&hp, skb, th->doff << 2))
>  		goto clear_hash;
> -	if (tcp_md5_hash_key(hp, key))
> +	if (tcp_md5_hash_key(&hp, key))
>  		goto clear_hash;
> -	ahash_request_set_crypt(req, NULL, md5_hash, 0);
> -	if (crypto_ahash_final(req))
> +	ahash_request_set_crypt(hp.req, NULL, md5_hash, 0);
> +	if (crypto_ahash_final(hp.req))
>  		goto clear_hash;
>  
> -	tcp_put_md5sig_pool();
> +	crypto_pool_put();
>  	return 0;
>  
>  clear_hash:
> -	tcp_put_md5sig_pool();
> +	crypto_pool_put();
>  clear_hash_noput:
>  	memset(md5_hash, 0, 16);
>  	return 1;

Re: [PATCH v2 3/5] crypto/net/tcp: Use crypto_pool for TCP-MD5

[Dmitry Safonov]

On 1/7/23 02:05, Jakub Kicinski wrote:
> On Tue,  3 Jan 2023 18:42:55 +0000 Dmitry Safonov wrote:
>> Use crypto_pool API that was designed with tcp_md5sig_pool in mind.
>> The conversion to use crypto_pool will allow:
>> - to reuse ahash_request(s) for different users
>> - to allocate only one per-CPU scratch buffer rather than a new one for
>>   each user
>> - to have a common API for net/ users that need ahash on RX/TX fast path
> 
>>  config TCP_MD5SIG
>>  	bool "TCP: MD5 Signature Option support (RFC2385)"
>> -	select CRYPTO
>> +	select CRYPTO_POOL
> 
> Are you sure we don't need to select CRYPTO any more?
> select does not resolve dependencies.

Yeah, stumbled into it when I was rebasing TCP-AO patches on the top:
they select both and I think you're right that it still needs to select
CRYPTO here as well (noticed only after sending v2).

> 
>>  	select CRYPTO_MD5
>>  	help
>>  	  RFC2385 specifies a method of giving MD5 protection to TCP sessions.
> 
>> @@ -749,29 +746,27 @@ static int tcp_v6_md5_hash_skb(char *md5_hash,
>>  		daddr = &ip6h->daddr;
>>  	}
>>  
>> -	hp = tcp_get_md5sig_pool();
>> -	if (!hp)
>> +	if (crypto_pool_get(tcp_md5_crypto_pool_id, (struct crypto_pool *)&hp))
> 
> &hp.base ? To avoid the cast

Oh, that's nice, will do!

Thanks,
          Dmitry

[PATCH v2 4/5] crypto/net/ipv6: sr: Switch to using crypto_pool

[Dmitry Safonov]

The conversion to use crypto_pool has the following upsides:
- now SR uses asynchronous API which may potentially free CPU cycles and
  improve performance for of CPU crypto algorithm providers;
- hash descriptors now don't have to be allocated on boot, but only at
  the moment SR starts using HMAC and until the last HMAC secret is
  deleted;
- potentially reuse ahash_request(s) for different users
- allocate only one per-CPU scratch buffer rather than a new one for
  each user
- have a common API for net/ users that need ahash on RX/TX fast path

Signed-off-by: Dmitry Safonov <dima@arista.com>
---
 include/net/seg6_hmac.h |   7 --
 net/ipv6/Kconfig        |   2 +-
 net/ipv6/seg6.c         |   3 -
 net/ipv6/seg6_hmac.c    | 204 ++++++++++++++++------------------------
 4 files changed, 80 insertions(+), 136 deletions(-)

diff --git a/include/net/seg6_hmac.h b/include/net/seg6_hmac.h
index 2b5d2ee5613e..d6b7820ecda2 100644
--- a/include/net/seg6_hmac.h
+++ b/include/net/seg6_hmac.h
@@ -32,13 +32,6 @@ struct seg6_hmac_info {
 	u8 alg_id;
 };
 
-struct seg6_hmac_algo {
-	u8 alg_id;
-	char name[64];
-	struct crypto_shash * __percpu *tfms;
-	struct shash_desc * __percpu *shashs;
-};
-
 extern int seg6_hmac_compute(struct seg6_hmac_info *hinfo,
 			     struct ipv6_sr_hdr *hdr, struct in6_addr *saddr,
 			     u8 *output);
diff --git a/net/ipv6/Kconfig b/net/ipv6/Kconfig
index 658bfed1df8b..5be1dab0f178 100644
--- a/net/ipv6/Kconfig
+++ b/net/ipv6/Kconfig
@@ -304,7 +304,7 @@ config IPV6_SEG6_LWTUNNEL
 config IPV6_SEG6_HMAC
 	bool "IPv6: Segment Routing HMAC support"
 	depends on IPV6
-	select CRYPTO
+	select CRYPTO_POOL
 	select CRYPTO_HMAC
 	select CRYPTO_SHA1
 	select CRYPTO_SHA256
diff --git a/net/ipv6/seg6.c b/net/ipv6/seg6.c
index 29346a6eec9f..3d66bf6d4c66 100644
--- a/net/ipv6/seg6.c
+++ b/net/ipv6/seg6.c
@@ -558,9 +558,6 @@ int __init seg6_init(void)
 
 void seg6_exit(void)
 {
-#ifdef CONFIG_IPV6_SEG6_HMAC
-	seg6_hmac_exit();
-#endif
 #ifdef CONFIG_IPV6_SEG6_LWTUNNEL
 	seg6_iptunnel_exit();
 #endif
diff --git a/net/ipv6/seg6_hmac.c b/net/ipv6/seg6_hmac.c
index d43c50a7310d..3732dd993925 100644
--- a/net/ipv6/seg6_hmac.c
+++ b/net/ipv6/seg6_hmac.c
@@ -35,6 +35,7 @@
 #include <net/xfrm.h>
 
 #include <crypto/hash.h>
+#include <crypto/pool.h>
 #include <net/seg6.h>
 #include <net/genetlink.h>
 #include <net/seg6_hmac.h>
@@ -70,6 +71,12 @@ static const struct rhashtable_params rht_params = {
 	.obj_cmpfn		= seg6_hmac_cmpfn,
 };
 
+struct seg6_hmac_algo {
+	u8 alg_id;
+	char name[64];
+	int crypto_pool_id;
+};
+
 static struct seg6_hmac_algo hmac_algos[] = {
 	{
 		.alg_id = SEG6_HMAC_ALGO_SHA1,
@@ -115,55 +122,17 @@ static struct seg6_hmac_algo *__hmac_get_algo(u8 alg_id)
 	return NULL;
 }
 
-static int __do_hmac(struct seg6_hmac_info *hinfo, const char *text, u8 psize,
-		     u8 *output, int outlen)
-{
-	struct seg6_hmac_algo *algo;
-	struct crypto_shash *tfm;
-	struct shash_desc *shash;
-	int ret, dgsize;
-
-	algo = __hmac_get_algo(hinfo->alg_id);
-	if (!algo)
-		return -ENOENT;
-
-	tfm = *this_cpu_ptr(algo->tfms);
-
-	dgsize = crypto_shash_digestsize(tfm);
-	if (dgsize > outlen) {
-		pr_debug("sr-ipv6: __do_hmac: digest size too big (%d / %d)\n",
-			 dgsize, outlen);
-		return -ENOMEM;
-	}
-
-	ret = crypto_shash_setkey(tfm, hinfo->secret, hinfo->slen);
-	if (ret < 0) {
-		pr_debug("sr-ipv6: crypto_shash_setkey failed: err %d\n", ret);
-		goto failed;
-	}
-
-	shash = *this_cpu_ptr(algo->shashs);
-	shash->tfm = tfm;
-
-	ret = crypto_shash_digest(shash, text, psize, output);
-	if (ret < 0) {
-		pr_debug("sr-ipv6: crypto_shash_digest failed: err %d\n", ret);
-		goto failed;
-	}
-
-	return dgsize;
-
-failed:
-	return ret;
-}
-
 int seg6_hmac_compute(struct seg6_hmac_info *hinfo, struct ipv6_sr_hdr *hdr,
 		      struct in6_addr *saddr, u8 *output)
 {
 	__be32 hmackeyid = cpu_to_be32(hinfo->hmackeyid);
-	u8 tmp_out[SEG6_HMAC_MAX_DIGESTSIZE];
+	struct crypto_pool_ahash hp;
+	struct seg6_hmac_algo *algo;
 	int plen, i, dgsize, wrsize;
+	struct crypto_ahash *tfm;
+	struct scatterlist sg;
 	char *ring, *off;
+	int err;
 
 	/* a 160-byte buffer for digest output allows to store highest known
 	 * hash function (RadioGatun) with up to 1216 bits
@@ -176,6 +145,10 @@ int seg6_hmac_compute(struct seg6_hmac_info *hinfo, struct ipv6_sr_hdr *hdr,
 	if (plen >= SEG6_HMAC_RING_SIZE)
 		return -EMSGSIZE;
 
+	algo = __hmac_get_algo(hinfo->alg_id);
+	if (!algo)
+		return -ENOENT;
+
 	/* Let's build the HMAC text on the ring buffer. The text is composed
 	 * as follows, in order:
 	 *
@@ -186,8 +159,36 @@ int seg6_hmac_compute(struct seg6_hmac_info *hinfo, struct ipv6_sr_hdr *hdr,
 	 * 5. All segments in the segments list (n * 128 bits)
 	 */
 
-	local_bh_disable();
+	err = crypto_pool_get(algo->crypto_pool_id, (struct crypto_pool *)&hp);
+	if (err)
+		return err;
+
 	ring = this_cpu_ptr(hmac_ring);
+
+	sg_init_one(&sg, ring, plen);
+
+	tfm = crypto_ahash_reqtfm(hp.req);
+	dgsize = crypto_ahash_digestsize(tfm);
+	if (dgsize > SEG6_HMAC_MAX_DIGESTSIZE) {
+		pr_debug("digest size too big (%d / %d)\n",
+			 dgsize, SEG6_HMAC_MAX_DIGESTSIZE);
+		err = -ENOMEM;
+		goto err_put_pool;
+	}
+
+	err = crypto_ahash_setkey(tfm, hinfo->secret, hinfo->slen);
+	if (err) {
+		pr_debug("crypto_ahash_setkey failed: err %d\n", err);
+		goto err_put_pool;
+	}
+
+	err = crypto_ahash_init(hp.req);
+	if (err)
+		goto err_put_pool;
+
+	ahash_request_set_crypt(hp.req, &sg,
+				hp.base.scratch, SEG6_HMAC_MAX_DIGESTSIZE);
+
 	off = ring;
 
 	/* source address */
@@ -210,21 +211,25 @@ int seg6_hmac_compute(struct seg6_hmac_info *hinfo, struct ipv6_sr_hdr *hdr,
 		off += 16;
 	}
 
-	dgsize = __do_hmac(hinfo, ring, plen, tmp_out,
-			   SEG6_HMAC_MAX_DIGESTSIZE);
-	local_bh_enable();
+	err = crypto_ahash_update(hp.req);
+	if (err)
+		goto err_put_pool;
 
-	if (dgsize < 0)
-		return dgsize;
+	err = crypto_ahash_final(hp.req);
+	if (err)
+		goto err_put_pool;
 
 	wrsize = SEG6_HMAC_FIELD_LEN;
 	if (wrsize > dgsize)
 		wrsize = dgsize;
 
 	memset(output, 0, SEG6_HMAC_FIELD_LEN);
-	memcpy(output, tmp_out, wrsize);
+	memcpy(output, hp.base.scratch, wrsize);
 
-	return 0;
+err_put_pool:
+	crypto_pool_put();
+
+	return err;
 }
 EXPORT_SYMBOL(seg6_hmac_compute);
 
@@ -291,12 +296,24 @@ EXPORT_SYMBOL(seg6_hmac_info_lookup);
 int seg6_hmac_info_add(struct net *net, u32 key, struct seg6_hmac_info *hinfo)
 {
 	struct seg6_pernet_data *sdata = seg6_pernet(net);
-	int err;
+	struct seg6_hmac_algo *algo;
+	int ret;
 
-	err = rhashtable_lookup_insert_fast(&sdata->hmac_infos, &hinfo->node,
+	algo = __hmac_get_algo(hinfo->alg_id);
+	if (!algo)
+		return -ENOENT;
+
+	ret = crypto_pool_alloc_ahash(algo->name);
+	if (ret < 0)
+		return ret;
+	algo->crypto_pool_id = ret;
+
+	ret = rhashtable_lookup_insert_fast(&sdata->hmac_infos, &hinfo->node,
 					    rht_params);
+	if (ret)
+		crypto_pool_release(algo->crypto_pool_id);
 
-	return err;
+	return ret;
 }
 EXPORT_SYMBOL(seg6_hmac_info_add);
 
@@ -304,6 +321,7 @@ int seg6_hmac_info_del(struct net *net, u32 key)
 {
 	struct seg6_pernet_data *sdata = seg6_pernet(net);
 	struct seg6_hmac_info *hinfo;
+	struct seg6_hmac_algo *algo;
 	int err = -ENOENT;
 
 	hinfo = rhashtable_lookup_fast(&sdata->hmac_infos, &key, rht_params);
@@ -315,6 +333,12 @@ int seg6_hmac_info_del(struct net *net, u32 key)
 	if (err)
 		goto out;
 
+	algo = __hmac_get_algo(hinfo->alg_id);
+	if (algo)
+		crypto_pool_release(algo->crypto_pool_id);
+	else
+		WARN_ON_ONCE(1);
+
 	seg6_hinfo_release(hinfo);
 
 out:
@@ -348,56 +372,9 @@ int seg6_push_hmac(struct net *net, struct in6_addr *saddr,
 }
 EXPORT_SYMBOL(seg6_push_hmac);
 
-static int seg6_hmac_init_algo(void)
-{
-	struct seg6_hmac_algo *algo;
-	struct crypto_shash *tfm;
-	struct shash_desc *shash;
-	int i, alg_count, cpu;
-
-	alg_count = ARRAY_SIZE(hmac_algos);
-
-	for (i = 0; i < alg_count; i++) {
-		struct crypto_shash **p_tfm;
-		int shsize;
-
-		algo = &hmac_algos[i];
-		algo->tfms = alloc_percpu(struct crypto_shash *);
-		if (!algo->tfms)
-			return -ENOMEM;
-
-		for_each_possible_cpu(cpu) {
-			tfm = crypto_alloc_shash(algo->name, 0, 0);
-			if (IS_ERR(tfm))
-				return PTR_ERR(tfm);
-			p_tfm = per_cpu_ptr(algo->tfms, cpu);
-			*p_tfm = tfm;
-		}
-
-		p_tfm = raw_cpu_ptr(algo->tfms);
-		tfm = *p_tfm;
-
-		shsize = sizeof(*shash) + crypto_shash_descsize(tfm);
-
-		algo->shashs = alloc_percpu(struct shash_desc *);
-		if (!algo->shashs)
-			return -ENOMEM;
-
-		for_each_possible_cpu(cpu) {
-			shash = kzalloc_node(shsize, GFP_KERNEL,
-					     cpu_to_node(cpu));
-			if (!shash)
-				return -ENOMEM;
-			*per_cpu_ptr(algo->shashs, cpu) = shash;
-		}
-	}
-
-	return 0;
-}
-
 int __init seg6_hmac_init(void)
 {
-	return seg6_hmac_init_algo();
+	return crypto_pool_reserve_scratch(SEG6_HMAC_MAX_DIGESTSIZE);
 }
 
 int __net_init seg6_hmac_net_init(struct net *net)
@@ -407,29 +384,6 @@ int __net_init seg6_hmac_net_init(struct net *net)
 	return rhashtable_init(&sdata->hmac_infos, &rht_params);
 }
 
-void seg6_hmac_exit(void)
-{
-	struct seg6_hmac_algo *algo = NULL;
-	int i, alg_count, cpu;
-
-	alg_count = ARRAY_SIZE(hmac_algos);
-	for (i = 0; i < alg_count; i++) {
-		algo = &hmac_algos[i];
-		for_each_possible_cpu(cpu) {
-			struct crypto_shash *tfm;
-			struct shash_desc *shash;
-
-			shash = *per_cpu_ptr(algo->shashs, cpu);
-			kfree(shash);
-			tfm = *per_cpu_ptr(algo->tfms, cpu);
-			crypto_free_shash(tfm);
-		}
-		free_percpu(algo->tfms);
-		free_percpu(algo->shashs);
-	}
-}
-EXPORT_SYMBOL(seg6_hmac_exit);
-
 void __net_exit seg6_hmac_net_exit(struct net *net)
 {
 	struct seg6_pernet_data *sdata = seg6_pernet(net);
-- 
2.39.0

[PATCH v2 5/5] crypto/Documentation: Add crypto_pool kernel API

[Dmitry Safonov]

Signed-off-by: Dmitry Safonov <dima@arista.com>
---
 Documentation/crypto/crypto_pool.rst | 33 ++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)
 create mode 100644 Documentation/crypto/crypto_pool.rst

diff --git a/Documentation/crypto/crypto_pool.rst b/Documentation/crypto/crypto_pool.rst
new file mode 100644
index 000000000000..4b8443171421
--- /dev/null
+++ b/Documentation/crypto/crypto_pool.rst
@@ -0,0 +1,33 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Per-CPU pool of crypto requests
+=============
+
+Overview
+--------
+The crypto pool API manages pre-allocated per-CPU pool of crypto requests,
+providing ability to use async crypto requests on fast paths, potentially
+on atomic contexts. The allocation and initialization of the requests should
+be done before their usage as it's slow-path and may sleep.
+
+Order of operations
+-------------------
+You are required to allocate a new pool prior using it and manage its lifetime.
+You can allocate a per-CPU pool of ahash requests by ``crypto_pool_alloc_ahash()``.
+It will give you a pool id that you can use further on fast-path for hashing.
+You can increase the reference counter for an allocated pool via
+``crypto_pool_add()``. Decrease the reference counter by ``crypto_pool_release()``.
+When the refcounter hits zero, the pool is scheduled for destruction and you
+can't use the corresponding crypto pool id anymore.
+Note that ``crypto_pool_add()`` and ``crypto_pool_release()`` must be called
+only for an already existing pool and can be called in atomic contexts.
+
+``crypto_pool_get()`` disables bh and returns you back ``struct crypto_pool *``,
+which is a generic type for different crypto requests and has ``scratch`` area
+that can be used as a temporary buffer for your operation.
+
+``crypto_pool_put()`` enables bh back once you've done with your crypto
+operation.
+
+If you need to pre-allocate a bigger per-CPU ``scratch`` area for you requests,
+you can use ``crypto_pool_reserve_scratch()``.
-- 
2.39.0

Re: [PATCH v2 5/5] crypto/Documentation: Add crypto_pool kernel API

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 1448 bytes --]

Hi Dmitry,

Thank you for the patch! Perhaps something to improve:

[auto build test WARNING on 69b41ac87e4a664de78a395ff97166f0b2943210]

url:    https://github.com/intel-lab-lkp/linux/commits/Dmitry-Safonov/crypto-Introduce-crypto_pool/20230104-024749
base:   69b41ac87e4a664de78a395ff97166f0b2943210
patch link:    https://lore.kernel.org/r/20230103184257.118069-6-dima%40arista.com
patch subject: [PATCH v2 5/5] crypto/Documentation: Add crypto_pool kernel API
reproduce:
        # https://github.com/intel-lab-lkp/linux/commit/8f97b82187da5291dc1618377c97338118eb36e1
        git remote add linux-review https://github.com/intel-lab-lkp/linux
        git fetch --no-tags linux-review Dmitry-Safonov/crypto-Introduce-crypto_pool/20230104-024749
        git checkout 8f97b82187da5291dc1618377c97338118eb36e1
        make menuconfig
        # enable CONFIG_COMPILE_TEST, CONFIG_WARN_MISSING_DOCUMENTS, CONFIG_WARN_ABI_ERRORS
        make htmldocs

If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <lkp@intel.com>

All warnings (new ones prefixed by >>):

>> Documentation/crypto/crypto_pool.rst:4: WARNING: Title underline too short.
>> Documentation/crypto/crypto_pool.rst: WARNING: document isn't included in any toctree

vim +4 Documentation/crypto/crypto_pool.rst

     2	
     3	Per-CPU pool of crypto requests
   > 4	=============
     5	

-- 
0-DAY CI Kernel Test Service
https://01.org/lkp

[-- Attachment #2: config --]
[-- Type: text/plain, Size: 39372 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 6.2.0-rc2 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="gcc-11 (Debian 11.3.0-8) 11.3.0"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=110300
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=23900
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=23900
CONFIG_LLD_VERSION=0
CONFIG_CC_CAN_LINK=y
CONFIG_CC_CAN_LINK_STATIC=y
CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
CONFIG_CC_HAS_ASM_GOTO_TIED_OUTPUT=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_PAHOLE_VERSION=123
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y

#
# General setup
#
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_COMPILE_TEST=y
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION=""
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_HAVE_KERNEL_ZSTD=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
# CONFIG_KERNEL_ZSTD is not set
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
# CONFIG_SYSVIPC is not set
# CONFIG_WATCH_QUEUE is not set
# CONFIG_CROSS_MEMORY_ATTACH is not set
# CONFIG_USELIB is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y
CONFIG_GENERIC_IRQ_RESERVATION_MODE=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# end of IRQ subsystem

CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_INIT=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_HAVE_POSIX_CPU_TIMERS_TASK_WORK=y
CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y

#
# Timers subsystem
#
CONFIG_HZ_PERIODIC=y
# CONFIG_NO_HZ_IDLE is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_CLOCKSOURCE_WATCHDOG_MAX_SKEW_US=100
# end of Timers subsystem

CONFIG_HAVE_EBPF_JIT=y
CONFIG_ARCH_WANT_DEFAULT_BPF_JIT=y

#
# BPF subsystem
#
# CONFIG_BPF_SYSCALL is not set
# end of BPF subsystem

CONFIG_PREEMPT_NONE_BUILD=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_PREEMPT_DYNAMIC is not set

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting

CONFIG_CPU_ISOLATION=y

#
# RCU Subsystem
#
CONFIG_TINY_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TINY_SRCU=y
# end of RCU Subsystem

# CONFIG_IKCONFIG is not set
# CONFIG_IKHEADERS is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y

#
# Scheduler features
#
# end of Scheduler features

CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_CC_HAS_INT128=y
CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
CONFIG_GCC12_NO_ARRAY_BOUNDS=y
CONFIG_ARCH_SUPPORTS_INT128=y
# CONFIG_CGROUPS is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_TIME_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_CHECKPOINT_RESTORE is not set
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_BOOT_CONFIG is not set
# CONFIG_INITRAMFS_PRESERVE_MTIME is not set
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_LD_ORPHAN_WARN=y
CONFIG_LD_ORPHAN_WARN_LEVEL="warn"
CONFIG_SYSCTL=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
# CONFIG_EXPERT is not set
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_SELFTEST is not set
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_RSEQ=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# end of Kernel Performance Events And Counters

# CONFIG_PROFILING is not set
# end of General setup

CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=28
CONFIG_ARCH_MMAP_RND_BITS_MAX=32
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=4
CONFIG_CC_HAS_SANE_STACKPROTECTOR=y

#
# Processor type and features
#
# CONFIG_SMP is not set
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_MPPARSE=y
# CONFIG_GOLDFISH is not set
# CONFIG_X86_CPU_RESCTRL is not set
# CONFIG_X86_EXTENDED_PLATFORM is not set
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
# CONFIG_HYPERVISOR_GUEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_IA32_FEAT_CTL=y
CONFIG_X86_VMX_FEATURE_NAMES=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_HYGON=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_ZHAOXIN=y
CONFIG_HPET_TIMER=y
CONFIG_DMI=y
CONFIG_NR_CPUS_RANGE_BEGIN=1
CONFIG_NR_CPUS_RANGE_END=1
CONFIG_NR_CPUS_DEFAULT=1
CONFIG_NR_CPUS=1
CONFIG_UP_LATE_INIT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
# CONFIG_X86_MCE is not set

#
# Performance monitoring
#
# CONFIG_PERF_EVENTS_AMD_POWER is not set
# CONFIG_PERF_EVENTS_AMD_UNCORE is not set
# CONFIG_PERF_EVENTS_AMD_BRS is not set
# end of Performance monitoring

CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX64=y
CONFIG_X86_VSYSCALL_EMULATION=y
# CONFIG_X86_IOPL_IOPERM is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
# CONFIG_X86_5LEVEL is not set
CONFIG_X86_DIRECT_GBPAGES=y
# CONFIG_AMD_MEM_ENCRYPT is not set
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_X86_UMIP=y
CONFIG_CC_HAS_IBT=y
# CONFIG_X86_KERNEL_IBT is not set
# CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS is not set
CONFIG_X86_INTEL_TSX_MODE_OFF=y
# CONFIG_X86_INTEL_TSX_MODE_ON is not set
# CONFIG_X86_INTEL_TSX_MODE_AUTO is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_LEGACY_VSYSCALL_XONLY=y
# CONFIG_LEGACY_VSYSCALL_NONE is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_MODIFY_LDT_SYSCALL=y
# CONFIG_STRICT_SIGALTSTACK_SIZE is not set
CONFIG_HAVE_LIVEPATCH=y
# end of Processor type and features

CONFIG_CC_HAS_SLS=y
CONFIG_CC_HAS_RETURN_THUNK=y
CONFIG_CC_HAS_ENTRY_PADDING=y
CONFIG_FUNCTION_PADDING_CFI=11
CONFIG_FUNCTION_PADDING_BYTES=16
# CONFIG_SPECULATION_MITIGATIONS is not set
CONFIG_ARCH_HAS_ADD_PAGES=y
CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y

#
# Power management and ACPI options
#
# CONFIG_SUSPEND is not set
# CONFIG_PM is not set
CONFIG_ARCH_SUPPORTS_ACPI=y
# CONFIG_ACPI is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
# end of CPU Frequency scaling

#
# CPU Idle
#
# CONFIG_CPU_IDLE is not set
# end of CPU Idle
# end of Power management and ACPI options

#
# Bus options (PCI etc.)
#
CONFIG_ISA_DMA_API=y
# end of Bus options (PCI etc.)

#
# Binary Emulations
#
# CONFIG_IA32_EMULATION is not set
# CONFIG_X86_X32_ABI is not set
# end of Binary Emulations

CONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set
CONFIG_AS_AVX512=y
CONFIG_AS_SHA1_NI=y
CONFIG_AS_SHA256_NI=y
CONFIG_AS_TPAUSE=y

#
# General architecture-dependent options
#
CONFIG_GENERIC_ENTRY=y
# CONFIG_JUMP_LABEL is not set
# CONFIG_STATIC_CALL_SELFTEST is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SET_DIRECT_MAP=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_ARCH_WANTS_NO_INSTR=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_RUST=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_MMU_GATHER_MERGE_VMAS=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_ARCH_HAS_NMI_SAFE_THIS_CPU_OPS=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
# CONFIG_SECCOMP is not set
CONFIG_HAVE_ARCH_STACKLEAK=y
CONFIG_HAVE_STACKPROTECTOR=y
# CONFIG_STACKPROTECTOR is not set
CONFIG_ARCH_SUPPORTS_LTO_CLANG=y
CONFIG_ARCH_SUPPORTS_LTO_CLANG_THIN=y
CONFIG_LTO_NONE=y
CONFIG_ARCH_SUPPORTS_CFI_CLANG=y
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_CONTEXT_TRACKING_USER=y
CONFIG_HAVE_CONTEXT_TRACKING_USER_OFFSTACK=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOVE_PUD=y
CONFIG_HAVE_MOVE_PMD=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_HAVE_ARCH_HUGE_VMALLOC=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y
CONFIG_SOFTIRQ_ON_OWN_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=28
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_HAVE_OBJTOOL=y
CONFIG_HAVE_JUMP_LABEL_HACK=y
CONFIG_HAVE_NOINSTR_HACK=y
CONFIG_HAVE_NOINSTR_VALIDATION=y
CONFIG_HAVE_UACCESS_VALIDATION=y
CONFIG_HAVE_STACK_VALIDATION=y
CONFIG_HAVE_RELIABLE_STACKTRACE=y
# CONFIG_COMPAT_32BIT_TIME is not set
CONFIG_HAVE_ARCH_VMAP_STACK=y
# CONFIG_VMAP_STACK is not set
CONFIG_HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET=y
CONFIG_RANDOMIZE_KSTACK_OFFSET=y
# CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT is not set
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
CONFIG_ARCH_HAS_MEM_ENCRYPT=y
CONFIG_HAVE_STATIC_CALL=y
CONFIG_HAVE_STATIC_CALL_INLINE=y
CONFIG_HAVE_PREEMPT_DYNAMIC=y
CONFIG_HAVE_PREEMPT_DYNAMIC_CALL=y
CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_SUPPORTS_PAGE_TABLE_CHECK=y
CONFIG_ARCH_HAS_ELFCORE_COMPAT=y
CONFIG_ARCH_HAS_PARANOID_L1D_FLUSH=y
CONFIG_DYNAMIC_SIGFRAME=y
CONFIG_ARCH_HAS_NONLEAF_PMD_YOUNG=y

#
# GCOV-based kernel profiling
#
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling

CONFIG_HAVE_GCC_PLUGINS=y
# CONFIG_GCC_PLUGINS is not set
CONFIG_FUNCTION_ALIGNMENT_4B=y
CONFIG_FUNCTION_ALIGNMENT_16B=y
CONFIG_FUNCTION_ALIGNMENT=16
# end of General architecture-dependent options

CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_BLOCK_LEGACY_AUTOLOAD is not set
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_DEV_ZONED is not set
# CONFIG_BLK_WBT is not set
# CONFIG_BLK_SED_OPAL is not set
# CONFIG_BLK_INLINE_ENCRYPTION is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_EFI_PARTITION=y
# end of Partition Types

#
# IO Schedulers
#
# CONFIG_MQ_IOSCHED_DEADLINE is not set
# CONFIG_MQ_IOSCHED_KYBER is not set
# CONFIG_IOSCHED_BFQ is not set
# end of IO Schedulers

CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y
CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y

#
# Executable file formats
#
# CONFIG_BINFMT_ELF is not set
# CONFIG_BINFMT_SCRIPT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_COREDUMP=y
# end of Executable file formats

#
# Memory Management options
#
# CONFIG_SWAP is not set

#
# SLAB allocator options
#
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLAB_MERGE_DEFAULT is not set
# CONFIG_SLAB_FREELIST_RANDOM is not set
# CONFIG_SLAB_FREELIST_HARDENED is not set
# CONFIG_SLUB_STATS is not set
# end of SLAB allocator options

# CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_SPARSEMEM=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
# CONFIG_SPARSEMEM_VMEMMAP is not set
CONFIG_HAVE_FAST_GUP=y
CONFIG_EXCLUSIVE_SYSTEM_RAM=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
# CONFIG_COMPACTION is not set
# CONFIG_PAGE_REPORTING is not set
CONFIG_PHYS_ADDR_T_64BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ARCH_WANTS_THP_SWAP=y
# CONFIG_TRANSPARENT_HUGEPAGE is not set
CONFIG_NEED_PER_CPU_KM=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
# CONFIG_CMA is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_CURRENT_STACK_POINTER=y
CONFIG_ARCH_HAS_PTE_DEVMAP=y
CONFIG_ZONE_DMA=y
CONFIG_ZONE_DMA32=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_PERCPU_STATS is not set

#
# GUP_TEST needs to have DEBUG_FS enabled
#
CONFIG_ARCH_HAS_PTE_SPECIAL=y
CONFIG_SECRETMEM=y
# CONFIG_ANON_VMA_NAME is not set
# CONFIG_USERFAULTFD is not set
# CONFIG_LRU_GEN is not set

#
# Data Access Monitoring
#
# CONFIG_DAMON is not set
# end of Data Access Monitoring
# end of Memory Management options

# CONFIG_NET is not set

#
# Device Drivers
#
CONFIG_HAVE_EISA=y
# CONFIG_EISA is not set
CONFIG_HAVE_PCI=y
# CONFIG_PCI is not set
# CONFIG_PCCARD is not set

#
# Generic Driver Options
#
# CONFIG_UEVENT_HELPER is not set
# CONFIG_DEVTMPFS is not set
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set

#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER is not set
# CONFIG_FW_LOADER_COMPRESS is not set
# CONFIG_FW_UPLOAD is not set
# end of Firmware loader

CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
# end of Generic Driver Options

#
# Bus devices
#
# CONFIG_ARM_INTEGRATOR_LM is not set
# CONFIG_BT1_APB is not set
# CONFIG_BT1_AXI is not set
# CONFIG_HISILICON_LPC is not set
# CONFIG_INTEL_IXP4XX_EB is not set
# CONFIG_QCOM_EBI2 is not set
# CONFIG_MHI_BUS is not set
# CONFIG_MHI_BUS_EP is not set
# end of Bus devices

#
# Firmware Drivers
#

#
# ARM System Control and Management Interface Protocol
#
# CONFIG_ARM_SCMI_PROTOCOL is not set
# end of ARM System Control and Management Interface Protocol

# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DMIID is not set
# CONFIG_DMI_SYSFS is not set
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
# CONFIG_FW_CFG_SYSFS is not set
# CONFIG_SYSFB_SIMPLEFB is not set
# CONFIG_BCM47XX_NVRAM is not set
# CONFIG_GOOGLE_FIRMWARE is not set

#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers

# CONFIG_GNSS is not set
# CONFIG_MTD is not set
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set

#
# NVME Support
#
# CONFIG_NVME_FC is not set
# end of NVME Support

#
# Misc devices
#
# CONFIG_DUMMY_IRQ is not set
# CONFIG_ATMEL_SSC is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_SMPRO_ERRMON is not set
# CONFIG_SMPRO_MISC is not set
# CONFIG_QCOM_COINCELL is not set
# CONFIG_SRAM is not set
# CONFIG_XILINX_SDFEC is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_93CX6 is not set
# end of EEPROM support

#
# Texas Instruments shared transport line discipline
#
# end of Texas Instruments shared transport line discipline

#
# Altera FPGA firmware download module (requires I2C)
#
# CONFIG_ECHO is not set
# CONFIG_PVPANIC is not set
# end of Misc devices

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# end of SCSI device support

# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_TARGET_CORE is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# end of IEEE 1394 (FireWire) support

# CONFIG_MACINTOSH_DRIVERS is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set

#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
# CONFIG_RMI4_CORE is not set

#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
# CONFIG_GAMEPORT is not set
# end of Hardware I/O ports
# end of Input device support

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_LEGACY_TIOCSTI is not set
# CONFIG_LDISC_AUTOLOAD is not set

#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_AMBA_PL010 is not set
# CONFIG_SERIAL_MESON is not set
# CONFIG_SERIAL_CLPS711X is not set
# CONFIG_SERIAL_SAMSUNG is not set
# CONFIG_SERIAL_TEGRA is not set
# CONFIG_SERIAL_IMX is not set
# CONFIG_SERIAL_UARTLITE is not set
# CONFIG_SERIAL_SH_SCI is not set
# CONFIG_SERIAL_MSM is not set
# CONFIG_SERIAL_VT8500 is not set
# CONFIG_SERIAL_OMAP is not set
# CONFIG_SERIAL_LANTIQ is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_BCM63XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_MXS_AUART is not set
# CONFIG_SERIAL_MPS2_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_FSL_LINFLEXUART is not set
# CONFIG_SERIAL_ST_ASC is not set
# CONFIG_SERIAL_STM32 is not set
# CONFIG_SERIAL_OWL is not set
# CONFIG_SERIAL_RDA is not set
# CONFIG_SERIAL_LITEUART is not set
# CONFIG_SERIAL_SUNPLUS is not set
# end of Serial drivers

# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NULL_TTY is not set
# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_VIRTIO_CONSOLE is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_ASPEED_KCS_IPMI_BMC is not set
# CONFIG_NPCM7XX_KCS_IPMI_BMC is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_MWAVE is not set
# CONFIG_DEVMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
# end of Character devices

#
# I2C support
#
# CONFIG_I2C is not set
# end of I2C support

# CONFIG_I3C is not set
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
# CONFIG_PPS is not set

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK_OPTIONAL=y

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# end of PTP clock support

# CONFIG_PINCTRL is not set
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_RESET is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
# CONFIG_BCMA is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_SUN4I_GPADC is not set
# CONFIG_MFD_AT91_USART is not set
# CONFIG_MFD_MADERA is not set
# CONFIG_MFD_EXYNOS_LPASS is not set
# CONFIG_MFD_MXS_LRADC is not set
# CONFIG_MFD_MX25_TSADC is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_PM8XXX is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_SUN6I_PRCM is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_TQMX86 is not set
# CONFIG_MFD_STM32_LPTIMER is not set
# CONFIG_MFD_STM32_TIMERS is not set
# end of Multifunction device drivers

# CONFIG_REGULATOR is not set
# CONFIG_RC_CORE is not set

#
# CEC support
#
# CONFIG_MEDIA_CEC_SUPPORT is not set
# end of CEC support

# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
# CONFIG_IMX_IPUV3_CORE is not set
# CONFIG_DRM is not set

#
# ARM devices
#
# end of ARM devices

#
# Frame buffer Devices
#
# CONFIG_FB is not set
# CONFIG_MMP_DISP is not set
# end of Frame buffer Devices

#
# Backlight & LCD device support
#
# CONFIG_LCD_CLASS_DEVICE is not set
# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
# end of Backlight & LCD device support

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
# end of Console display driver support
# end of Graphics support

# CONFIG_SOUND is not set

#
# HID support
#
# CONFIG_HID is not set
# end of HID support

CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set

#
# DMABUF options
#
# CONFIG_SYNC_FILE is not set
# CONFIG_DMABUF_HEAPS is not set
# end of DMABUF options

# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_VFIO is not set
# CONFIG_VIRT_DRIVERS is not set
# CONFIG_VIRTIO_MENU is not set
# CONFIG_VHOST_MENU is not set

#
# Microsoft Hyper-V guest support
#
# end of Microsoft Hyper-V guest support

# CONFIG_GREYBUS is not set
# CONFIG_COMEDI is not set
# CONFIG_STAGING is not set
# CONFIG_CHROME_PLATFORMS is not set
# CONFIG_MELLANOX_PLATFORM is not set
# CONFIG_OLPC_XO175 is not set
# CONFIG_SURFACE_PLATFORMS is not set
# CONFIG_X86_PLATFORM_DEVICES is not set
# CONFIG_COMMON_CLK is not set
# CONFIG_HWSPINLOCK is not set

#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# CONFIG_BCM2835_TIMER is not set
# CONFIG_BCM_KONA_TIMER is not set
# CONFIG_DAVINCI_TIMER is not set
# CONFIG_DIGICOLOR_TIMER is not set
# CONFIG_OMAP_DM_TIMER is not set
# CONFIG_DW_APB_TIMER is not set
# CONFIG_FTTMR010_TIMER is not set
# CONFIG_IXP4XX_TIMER is not set
# CONFIG_MESON6_TIMER is not set
# CONFIG_OWL_TIMER is not set
# CONFIG_RDA_TIMER is not set
# CONFIG_SUN4I_TIMER is not set
# CONFIG_TEGRA_TIMER is not set
# CONFIG_VT8500_TIMER is not set
# CONFIG_NPCM7XX_TIMER is not set
# CONFIG_ASM9260_TIMER is not set
# CONFIG_CLKSRC_DBX500_PRCMU is not set
# CONFIG_CLPS711X_TIMER is not set
# CONFIG_MXS_TIMER is not set
# CONFIG_NSPIRE_TIMER is not set
# CONFIG_INTEGRATOR_AP_TIMER is not set
# CONFIG_CLKSRC_PISTACHIO is not set
# CONFIG_CLKSRC_STM32_LP is not set
# CONFIG_ARMV7M_SYSTICK is not set
# CONFIG_ATMEL_PIT is not set
# CONFIG_ATMEL_ST is not set
# CONFIG_CLKSRC_SAMSUNG_PWM is not set
# CONFIG_FSL_FTM_TIMER is not set
# CONFIG_OXNAS_RPS_TIMER is not set
# CONFIG_MTK_TIMER is not set
# CONFIG_SH_TIMER_CMT is not set
# CONFIG_SH_TIMER_MTU2 is not set
# CONFIG_RENESAS_OSTM is not set
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
# CONFIG_CLKSRC_PXA is not set
# CONFIG_TIMER_IMX_SYS_CTR is not set
# CONFIG_CLKSRC_ST_LPC is not set
# CONFIG_GXP_TIMER is not set
# CONFIG_MSC313E_TIMER is not set
# CONFIG_MICROCHIP_PIT64B is not set
# end of Clock Source drivers

# CONFIG_MAILBOX is not set
# CONFIG_IOMMU_SUPPORT is not set

#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
# end of Remoteproc drivers

#
# Rpmsg drivers
#
# CONFIG_RPMSG_VIRTIO is not set
# end of Rpmsg drivers

#
# SOC (System On Chip) specific Drivers
#

#
# Amlogic SoC drivers
#
# CONFIG_MESON_CANVAS is not set
# CONFIG_MESON_CLK_MEASURE is not set
# CONFIG_MESON_GX_SOCINFO is not set
# CONFIG_MESON_MX_SOCINFO is not set
# end of Amlogic SoC drivers

#
# Apple SoC drivers
#
# CONFIG_APPLE_SART is not set
# end of Apple SoC drivers

#
# ASPEED SoC drivers
#
# CONFIG_ASPEED_LPC_CTRL is not set
# CONFIG_ASPEED_LPC_SNOOP is not set
# CONFIG_ASPEED_UART_ROUTING is not set
# CONFIG_ASPEED_P2A_CTRL is not set
# CONFIG_ASPEED_SOCINFO is not set
# end of ASPEED SoC drivers

# CONFIG_AT91_SOC_ID is not set
# CONFIG_AT91_SOC_SFR is not set

#
# Broadcom SoC drivers
#
# CONFIG_SOC_BCM63XX is not set
# CONFIG_SOC_BRCMSTB is not set
# end of Broadcom SoC drivers

#
# NXP/Freescale QorIQ SoC drivers
#
# end of NXP/Freescale QorIQ SoC drivers

#
# fujitsu SoC drivers
#
# end of fujitsu SoC drivers

#
# i.MX SoC drivers
#
# CONFIG_SOC_IMX8M is not set
# CONFIG_SOC_IMX9 is not set
# end of i.MX SoC drivers

#
# IXP4xx SoC drivers
#
# CONFIG_IXP4XX_QMGR is not set
# CONFIG_IXP4XX_NPE is not set
# end of IXP4xx SoC drivers

#
# Enable LiteX SoC Builder specific drivers
#
# CONFIG_LITEX_SOC_CONTROLLER is not set
# end of Enable LiteX SoC Builder specific drivers

# CONFIG_LOONGSON2_GUTS is not set

#
# MediaTek SoC drivers
#
# CONFIG_MTK_CMDQ is not set
# CONFIG_MTK_DEVAPC is not set
# CONFIG_MTK_INFRACFG is not set
# CONFIG_MTK_MMSYS is not set
# end of MediaTek SoC drivers

#
# Qualcomm SoC drivers
#
# CONFIG_QCOM_GENI_SE is not set
# CONFIG_QCOM_GSBI is not set
# CONFIG_QCOM_LLCC is not set
# CONFIG_QCOM_RPMH is not set
# CONFIG_QCOM_SPM is not set
# CONFIG_QCOM_ICC_BWMON is not set
# end of Qualcomm SoC drivers

# CONFIG_SOC_RENESAS is not set
# CONFIG_ROCKCHIP_GRF is not set
# CONFIG_SOC_SAMSUNG is not set
# CONFIG_SOC_TI is not set
# CONFIG_UX500_SOC_ID is not set

#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers

# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_PWM is not set

#
# IRQ chip support
#
# CONFIG_RENESAS_INTC_IRQPIN is not set
# CONFIG_RENESAS_IRQC is not set
# CONFIG_RENESAS_RZA1_IRQC is not set
# CONFIG_RENESAS_RZG2L_IRQC is not set
# CONFIG_SL28CPLD_INTC is not set
# CONFIG_TS4800_IRQ is not set
# CONFIG_INGENIC_TCU_IRQ is not set
# CONFIG_IRQ_UNIPHIER_AIDET is not set
# CONFIG_MESON_IRQ_GPIO is not set
# CONFIG_IMX_IRQSTEER is not set
# CONFIG_IMX_INTMUX is not set
# CONFIG_EXYNOS_IRQ_COMBINER is not set
# CONFIG_MST_IRQ is not set
# CONFIG_MCHP_EIC is not set
# CONFIG_SUNPLUS_SP7021_INTC is not set
# end of IRQ chip support

# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set

#
# PHY Subsystem
#
# CONFIG_GENERIC_PHY is not set
# CONFIG_PHY_PISTACHIO_USB is not set
# CONFIG_PHY_CAN_TRANSCEIVER is not set

#
# PHY drivers for Broadcom platforms
#
# CONFIG_PHY_BCM63XX_USBH is not set
# CONFIG_BCM_KONA_USB2_PHY is not set
# end of PHY drivers for Broadcom platforms

# CONFIG_PHY_HI6220_USB is not set
# CONFIG_PHY_HI3660_USB is not set
# CONFIG_PHY_HI3670_USB is not set
# CONFIG_PHY_HI3670_PCIE is not set
# CONFIG_PHY_HISTB_COMBPHY is not set
# CONFIG_PHY_HISI_INNO_USB2 is not set
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_PHY_PXA_USB is not set
# CONFIG_PHY_MMP3_USB is not set
# CONFIG_PHY_MMP3_HSIC is not set
# CONFIG_PHY_MT7621_PCI is not set
# CONFIG_PHY_RALINK_USB is not set
# CONFIG_PHY_R8A779F0_ETHERNET_SERDES is not set
# CONFIG_PHY_RCAR_GEN3_USB3 is not set
# CONFIG_PHY_ROCKCHIP_DPHY_RX0 is not set
# CONFIG_PHY_ROCKCHIP_PCIE is not set
# CONFIG_PHY_ROCKCHIP_SNPS_PCIE3 is not set
# CONFIG_PHY_EXYNOS_MIPI_VIDEO is not set
# CONFIG_PHY_SAMSUNG_USB2 is not set
# CONFIG_PHY_ST_SPEAR1310_MIPHY is not set
# CONFIG_PHY_ST_SPEAR1340_MIPHY is not set
# CONFIG_PHY_TEGRA194_P2U is not set
# CONFIG_PHY_DA8XX_USB is not set
# CONFIG_OMAP_CONTROL_PHY is not set
# CONFIG_TI_PIPE3 is not set
# CONFIG_PHY_INTEL_KEEMBAY_EMMC is not set
# CONFIG_PHY_INTEL_KEEMBAY_USB is not set
# CONFIG_PHY_INTEL_LGM_EMMC is not set
# CONFIG_PHY_XILINX_ZYNQMP is not set
# end of PHY Subsystem

# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set

#
# Performance monitor support
#
# CONFIG_ARM_CCN is not set
# CONFIG_ARM_CMN is not set
# CONFIG_FSL_IMX8_DDR_PMU is not set
# CONFIG_XGENE_PMU is not set
# CONFIG_ARM_DMC620_PMU is not set
# CONFIG_MARVELL_CN10K_TAD_PMU is not set
# CONFIG_ALIBABA_UNCORE_DRW_PMU is not set
# CONFIG_MARVELL_CN10K_DDR_PMU is not set
# CONFIG_MESON_DDR_PMU is not set
# end of Performance monitor support

# CONFIG_RAS is not set

#
# Android
#
# CONFIG_ANDROID_BINDER_IPC is not set
# end of Android

# CONFIG_DAX is not set
# CONFIG_NVMEM is not set

#
# HW tracing support
#
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set
# end of HW tracing support

# CONFIG_FPGA is not set
# CONFIG_TEE is not set
# CONFIG_SIOX is not set
# CONFIG_SLIMBUS is not set
# CONFIG_INTERCONNECT is not set
# CONFIG_COUNTER is not set
# CONFIG_PECI is not set
# CONFIG_HTE is not set
# end of Device Drivers

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_VALIDATE_FS_PARSER is not set
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_F2FS_FS is not set
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
CONFIG_FILE_LOCKING=y
# CONFIG_FS_ENCRYPTION is not set
# CONFIG_FS_VERITY is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY_USER is not set
# CONFIG_FANOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_OVERLAY_FS is not set

#
# Caches
#
# CONFIG_FSCACHE is not set
# end of Caches

#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
# end of CD-ROM/DVD Filesystems

#
# DOS/FAT/EXFAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_EXFAT_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_NTFS3_FS is not set
# end of DOS/FAT/EXFAT/NT Filesystems

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_PROC_CHILDREN is not set
CONFIG_PROC_PID_ARCH_STATUS=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLBFS is not set
CONFIG_ARCH_WANT_HUGETLB_PAGE_OPTIMIZE_VMEMMAP=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
# CONFIG_CONFIGFS_FS is not set
# end of Pseudo filesystems

# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_NLS is not set
# CONFIG_UNICODE is not set
CONFIG_IO_WQ=y
# end of File systems

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
# CONFIG_HARDENED_USERCOPY is not set
# CONFIG_FORTIFY_SOURCE is not set
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,integrity,bpf"

#
# Kernel hardening options
#

#
# Memory initialization
#
CONFIG_INIT_STACK_NONE=y
# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
# CONFIG_ZERO_CALL_USED_REGS is not set
# end of Memory initialization

CONFIG_RANDSTRUCT_NONE=y
# end of Kernel hardening options
# end of Security options

# CONFIG_CRYPTO is not set

#
# Library routines
#
# CONFIG_PACKING is not set
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
# CONFIG_CORDIC is not set
# CONFIG_PRIME_NUMBERS is not set
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_ARCH_USE_SYM_ANNOTATIONS=y

#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
# CONFIG_CRYPTO_LIB_CHACHA is not set
# CONFIG_CRYPTO_LIB_CURVE25519 is not set
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=11
# CONFIG_CRYPTO_LIB_POLY1305 is not set
# end of Crypto library routines

# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC64_ROCKSOFT is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC64 is not set
# CONFIG_CRC4 is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
# CONFIG_CRC8 is not set
# CONFIG_RANDOM32_SELFTEST is not set
# CONFIG_XZ_DEC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_SWIOTLB=y
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_IRQ_POLL is not set
CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_VDSO_TIME_NS=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_ARCH_HAS_CPU_CACHE_INVALIDATE_MEMREGION=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_ARCH_HAS_COPY_MC=y
CONFIG_ARCH_STACKWALK=y
CONFIG_STACKDEPOT=y
CONFIG_SBITMAP=y
# CONFIG_PARMAN is not set
# CONFIG_OBJAGG is not set
# end of Library routines

#
# Kernel hacking
#

#
# printk and dmesg options
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_PRINTK_CALLER is not set
# CONFIG_STACKTRACE_BUILD_ID is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DYNAMIC_DEBUG_CORE is not set
# CONFIG_SYMBOLIC_ERRNAME is not set
CONFIG_DEBUG_BUGVERBOSE=y
# end of printk and dmesg options

# CONFIG_DEBUG_KERNEL is not set

#
# Compile-time checks and compiler options
#
CONFIG_AS_HAS_NON_CONST_LEB128=y
CONFIG_FRAME_WARN=2048
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HEADERS_INSTALL is not set
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_OBJTOOL=y
# end of Compile-time checks and compiler options

#
# Generic Kernel Debugging Instruments
#
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_FS is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_UBSAN is not set
CONFIG_HAVE_ARCH_KCSAN=y
CONFIG_HAVE_KCSAN_COMPILER=y
# end of Generic Kernel Debugging Instruments

#
# Networking Debugging
#
# end of Networking Debugging

#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
CONFIG_SLUB_DEBUG=y
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_PAGE_TABLE_CHECK is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_ARCH_HAS_DEBUG_WX=y
# CONFIG_DEBUG_WX is not set
CONFIG_GENERIC_PTDUMP=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
# CONFIG_DEBUG_VM_PGTABLE is not set
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_ARCH_SUPPORTS_KMAP_LOCAL_FORCE_MAP=y
CONFIG_HAVE_ARCH_KASAN=y
CONFIG_HAVE_ARCH_KASAN_VMALLOC=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
# CONFIG_KASAN is not set
CONFIG_HAVE_ARCH_KFENCE=y
# CONFIG_KFENCE is not set
CONFIG_HAVE_ARCH_KMSAN=y
# end of Memory Debugging

#
# Debug Oops, Lockups and Hangs
#
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
CONFIG_HARDLOCKUP_CHECK_TIMESTAMP=y
# end of Debug Oops, Lockups and Hangs

#
# Scheduler Debugging
#
# end of Scheduler Debugging

# CONFIG_DEBUG_TIMEKEEPING is not set

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_WW_MUTEX_SELFTEST is not set
# end of Lock Debugging (spinlocks, mutexes, etc...)

# CONFIG_DEBUG_IRQFLAGS is not set
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set

#
# Debug kernel data structures
#
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
# end of Debug kernel data structures

#
# RCU Debugging
#
# end of RCU Debugging

CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_RETHOOK=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=y
CONFIG_HAVE_DYNAMIC_FTRACE_NO_PATCHABLE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_OBJTOOL_MCOUNT=y
CONFIG_HAVE_OBJTOOL_NOP_MCOUNT=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_BUILDTIME_MCOUNT_SORT=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_SAMPLE_FTRACE_DIRECT=y
CONFIG_HAVE_SAMPLE_FTRACE_DIRECT_MULTI=y
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y

#
# x86 Debugging
#
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_UNWINDER_ORC=y
# CONFIG_UNWINDER_FRAME_POINTER is not set
# end of x86 Debugging

#
# Kernel Testing and Coverage
#
# CONFIG_KUNIT is not set
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_KCOV is not set
# CONFIG_RUNTIME_TESTING_MENU is not set
CONFIG_ARCH_USE_MEMTEST=y
# CONFIG_MEMTEST is not set
# end of Kernel Testing and Coverage

#
# Rust hacking
#
# end of Rust hacking

CONFIG_WARN_MISSING_DOCUMENTS=y
CONFIG_WARN_ABI_ERRORS=y
# end of Kernel hacking

Re: [PATCH v2 5/5] crypto/Documentation: Add crypto_pool kernel API

[Jakub Kicinski]

Some extra nits here since you need to respin for the build warning
(include the document in some index / toc tree and adjust the length 
of the underscores to match the line length).

On Tue,  3 Jan 2023 18:42:57 +0000 Dmitry Safonov wrote:
> diff --git a/Documentation/crypto/crypto_pool.rst b/Documentation/crypto/crypto_pool.rst
> new file mode 100644
> index 000000000000..4b8443171421
> --- /dev/null
> +++ b/Documentation/crypto/crypto_pool.rst
> @@ -0,0 +1,33 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +Per-CPU pool of crypto requests
> +=============
> +
> +Overview
> +--------
> +The crypto pool API manages pre-allocated per-CPU pool of crypto requests,
> +providing ability to use async crypto requests on fast paths, potentially

.. you *don't* enable async crypto in this series, right?

> +on atomic contexts. The allocation and initialization of the requests should

s/on/in/ atomic contexts

> +be done before their usage as it's slow-path and may sleep.
> +
> +Order of operations
> +-------------------
> +You are required to allocate a new pool prior using it and manage its lifetime.

The use of second person is quite uncommon for documentation, but if
you prefer so be it..

> +You can allocate a per-CPU pool of ahash requests by ``crypto_pool_alloc_ahash()``.

You don't need to use the backticks around function names and struct
names. Our doc rendering system recognizes them automatically. 

`make htmldocs` to see for yourself.

Re: [PATCH v2 5/5] crypto/Documentation: Add crypto_pool kernel API

[Dmitry Safonov]

On 1/7/23 02:06, Jakub Kicinski wrote:
> Some extra nits here since you need to respin for the build warning
> (include the document in some index / toc tree and adjust the length 
> of the underscores to match the line length).

Thanks again, will correct according to your review notes,

> 
> On Tue,  3 Jan 2023 18:42:57 +0000 Dmitry Safonov wrote:
>> diff --git a/Documentation/crypto/crypto_pool.rst b/Documentation/crypto/crypto_pool.rst
>> new file mode 100644
>> index 000000000000..4b8443171421
>> --- /dev/null
>> +++ b/Documentation/crypto/crypto_pool.rst
>> @@ -0,0 +1,33 @@
>> +.. SPDX-License-Identifier: GPL-2.0
>> +
>> +Per-CPU pool of crypto requests
>> +=============
>> +
>> +Overview
>> +--------
>> +The crypto pool API manages pre-allocated per-CPU pool of crypto requests,
>> +providing ability to use async crypto requests on fast paths, potentially
> 
> .. you *don't* enable async crypto in this series, right?
> 
>> +on atomic contexts. The allocation and initialization of the requests should
> 
> s/on/in/ atomic contexts
> 
>> +be done before their usage as it's slow-path and may sleep.
>> +
>> +Order of operations
>> +-------------------
>> +You are required to allocate a new pool prior using it and manage its lifetime.
> 
> The use of second person is quite uncommon for documentation, but if
> you prefer so be it..

I used Documentation/crypto/crypto_engine.rst as an example :-)
[where "example" was `cp crypto_{engine,pool}.rst && vim crypto_pool.rst`]

> 
>> +You can allocate a per-CPU pool of ahash requests by ``crypto_pool_alloc_ahash()``.
> 
> You don't need to use the backticks around function names and struct
> names. Our doc rendering system recognizes them automatically. 
> 
> `make htmldocs` to see for yourself.

Thanks,
          Dmitry