* [PATCH v8 0/2] arm64: dts: mt8195: Add Ethernet controller @ 2023-01-05 1:07 Biao Huang 2023-01-05 1:07 ` [PATCH v8 1/2] stmmac: dwmac-mediatek: remove the dwmac_fix_mac_speed Biao Huang ` (3 more replies) 0 siblings, 4 replies; 7+ messages in thread From: Biao Huang @ 2023-01-05 1:07 UTC (permalink / raw) To: Andrew Lunn, AngeloGioacchino Del Regno, Rob Herring, Krzysztof Kozlowski, Matthias Brugger Cc: Giuseppe Cavallaro, Alexandre Torgue, Jose Abreu, David S . Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni, Maxime Coquelin, Richard Cochran, devicetree, linux-arm-kernel, linux-mediatek, linux-kernel, Biao Huang, macpaul.lin, netdev Changes in v8: 1. add reviewed-by as Andrew's comments. Changes in v7: 1. move mdio node to .dtsi, and remove the compatible property in ethernet-phy node as Andrew's comments. 2. add netdev@ to cc list as Jakub's reminder. Changes in v6: 1. add reviewed-by as Angelo's comments 2. remove fix_mac_speed in driver as Andrew's comments. Changes in v5: 1. reorder the clocks as Angelo's comments 2. add a driver patch to fix rgmii-id issue, then we can use a ususal way rgmii/rgmii-id as Andrew's comments. Changes in v4: 1. remove {address,size}-cells = <0> to avoid warning as Angelo's feedback. 2. Add reviewd-by as Angelo's comments. Changes in v3: 1. move stmmac-axi-config, rx-queues-config, tx-queues-configs inside ethernet node as Angelo's comments. 2. add {address,size}-cells = <0> in ethernet node as Angelo's comments. Changes in v2: 1. modify pinctrl node used by ethernet to match rules in pinctrl-mt8195.yaml, which is pointed by Krzysztof. 2. remove "mac-address" property in ethernet node as comments of Krzysztof. Changes in v1: add dts node for MT8195 Ethernet controller Biao Huang (2): stmmac: dwmac-mediatek: remove the dwmac_fix_mac_speed arm64: dts: mt8195: Add Ethernet controller arch/arm64/boot/dts/mediatek/mt8195-demo.dts | 77 ++++++++++++++++ arch/arm64/boot/dts/mediatek/mt8195.dtsi | 92 +++++++++++++++++++ .../ethernet/stmicro/stmmac/dwmac-mediatek.c | 26 ------ 3 files changed, 169 insertions(+), 26 deletions(-) -- 2.25.1 ^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH v8 1/2] stmmac: dwmac-mediatek: remove the dwmac_fix_mac_speed 2023-01-05 1:07 [PATCH v8 0/2] arm64: dts: mt8195: Add Ethernet controller Biao Huang @ 2023-01-05 1:07 ` Biao Huang 2023-01-05 1:07 ` [PATCH v8 2/2] arm64: dts: mt8195: Add Ethernet controller Biao Huang ` (2 subsequent siblings) 3 siblings, 0 replies; 7+ messages in thread From: Biao Huang @ 2023-01-05 1:07 UTC (permalink / raw) To: Andrew Lunn, AngeloGioacchino Del Regno, Rob Herring, Krzysztof Kozlowski, Matthias Brugger Cc: Giuseppe Cavallaro, Alexandre Torgue, Jose Abreu, David S . Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni, Maxime Coquelin, Richard Cochran, devicetree, linux-arm-kernel, linux-mediatek, linux-kernel, Biao Huang, macpaul.lin, netdev In current driver, MAC will always enable 2ns delay in RGMII mode, but that's not the correct usage. Remove the dwmac_fix_mac_speed() in driver, and recommend "rgmii-id" for phy-mode in device tree. Fixes: f2d356a6ab71 ("stmmac: dwmac-mediatek: add support for mt8195") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Biao Huang <biao.huang@mediatek.com> --- .../ethernet/stmicro/stmmac/dwmac-mediatek.c | 26 ------------------- 1 file changed, 26 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c index d42e1afb6521..2f7d8e4561d9 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.c @@ -90,7 +90,6 @@ struct mediatek_dwmac_plat_data { struct mediatek_dwmac_variant { int (*dwmac_set_phy_interface)(struct mediatek_dwmac_plat_data *plat); int (*dwmac_set_delay)(struct mediatek_dwmac_plat_data *plat); - void (*dwmac_fix_mac_speed)(void *priv, unsigned int speed); /* clock ids to be requested */ const char * const *clk_list; @@ -443,32 +442,9 @@ static int mt8195_set_delay(struct mediatek_dwmac_plat_data *plat) return 0; } -static void mt8195_fix_mac_speed(void *priv, unsigned int speed) -{ - struct mediatek_dwmac_plat_data *priv_plat = priv; - - if ((phy_interface_mode_is_rgmii(priv_plat->phy_mode))) { - /* prefer 2ns fixed delay which is controlled by TXC_PHASE_CTRL, - * when link speed is 1Gbps with RGMII interface, - * Fall back to delay macro circuit for 10/100Mbps link speed. - */ - if (speed == SPEED_1000) - regmap_update_bits(priv_plat->peri_regmap, - MT8195_PERI_ETH_CTRL0, - MT8195_RGMII_TXC_PHASE_CTRL | - MT8195_DLY_GTXC_ENABLE | - MT8195_DLY_GTXC_INV | - MT8195_DLY_GTXC_STAGES, - MT8195_RGMII_TXC_PHASE_CTRL); - else - mt8195_set_delay(priv_plat); - } -} - static const struct mediatek_dwmac_variant mt8195_gmac_variant = { .dwmac_set_phy_interface = mt8195_set_interface, .dwmac_set_delay = mt8195_set_delay, - .dwmac_fix_mac_speed = mt8195_fix_mac_speed, .clk_list = mt8195_dwmac_clk_l, .num_clks = ARRAY_SIZE(mt8195_dwmac_clk_l), .dma_bit_mask = 35, @@ -619,8 +595,6 @@ static int mediatek_dwmac_common_data(struct platform_device *pdev, plat->bsp_priv = priv_plat; plat->init = mediatek_dwmac_init; plat->clks_config = mediatek_dwmac_clks_config; - if (priv_plat->variant->dwmac_fix_mac_speed) - plat->fix_mac_speed = priv_plat->variant->dwmac_fix_mac_speed; plat->safety_feat_cfg = devm_kzalloc(&pdev->dev, sizeof(*plat->safety_feat_cfg), -- 2.25.1 ^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH v8 2/2] arm64: dts: mt8195: Add Ethernet controller 2023-01-05 1:07 [PATCH v8 0/2] arm64: dts: mt8195: Add Ethernet controller Biao Huang 2023-01-05 1:07 ` [PATCH v8 1/2] stmmac: dwmac-mediatek: remove the dwmac_fix_mac_speed Biao Huang @ 2023-01-05 1:07 ` Biao Huang 2023-01-19 18:19 ` Matthias Brugger 2023-01-06 4:58 ` [PATCH v8 0/2] " Jakub Kicinski 2023-01-06 5:10 ` patchwork-bot+netdevbpf 3 siblings, 1 reply; 7+ messages in thread From: Biao Huang @ 2023-01-05 1:07 UTC (permalink / raw) To: Andrew Lunn, AngeloGioacchino Del Regno, Rob Herring, Krzysztof Kozlowski, Matthias Brugger Cc: Giuseppe Cavallaro, Alexandre Torgue, Jose Abreu, David S . Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni, Maxime Coquelin, Richard Cochran, devicetree, linux-arm-kernel, linux-mediatek, linux-kernel, Biao Huang, macpaul.lin, netdev Add Ethernet controller node for mt8195. Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Biao Huang <biao.huang@mediatek.com> --- arch/arm64/boot/dts/mediatek/mt8195-demo.dts | 77 ++++++++++++++++ arch/arm64/boot/dts/mediatek/mt8195.dtsi | 92 ++++++++++++++++++++ 2 files changed, 169 insertions(+) diff --git a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts index 4fbd99eb496a..6a48c135f0da 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts +++ b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts @@ -78,6 +78,23 @@ optee_reserved: optee@43200000 { }; }; +ð { + phy-mode ="rgmii-id"; + phy-handle = <ðernet_phy0>; + snps,reset-gpio = <&pio 93 GPIO_ACTIVE_HIGH>; + snps,reset-delays-us = <0 10000 80000>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <ð_default_pins>; + pinctrl-1 = <ð_sleep_pins>; + status = "okay"; + + mdio { + ethernet_phy0: ethernet-phy@1 { + reg = <0x1>; + }; + }; +}; + &i2c6 { clock-frequency = <400000>; pinctrl-0 = <&i2c6_pins>; @@ -258,6 +275,66 @@ &mt6359_vsram_others_ldo_reg { }; &pio { + eth_default_pins: eth-default-pins { + pins-txd { + pinmux = <PINMUX_GPIO77__FUNC_GBE_TXD3>, + <PINMUX_GPIO78__FUNC_GBE_TXD2>, + <PINMUX_GPIO79__FUNC_GBE_TXD1>, + <PINMUX_GPIO80__FUNC_GBE_TXD0>; + drive-strength = <MTK_DRIVE_8mA>; + }; + pins-cc { + pinmux = <PINMUX_GPIO85__FUNC_GBE_TXC>, + <PINMUX_GPIO88__FUNC_GBE_TXEN>, + <PINMUX_GPIO87__FUNC_GBE_RXDV>, + <PINMUX_GPIO86__FUNC_GBE_RXC>; + drive-strength = <MTK_DRIVE_8mA>; + }; + pins-rxd { + pinmux = <PINMUX_GPIO81__FUNC_GBE_RXD3>, + <PINMUX_GPIO82__FUNC_GBE_RXD2>, + <PINMUX_GPIO83__FUNC_GBE_RXD1>, + <PINMUX_GPIO84__FUNC_GBE_RXD0>; + }; + pins-mdio { + pinmux = <PINMUX_GPIO89__FUNC_GBE_MDC>, + <PINMUX_GPIO90__FUNC_GBE_MDIO>; + input-enable; + }; + pins-power { + pinmux = <PINMUX_GPIO91__FUNC_GPIO91>, + <PINMUX_GPIO92__FUNC_GPIO92>; + output-high; + }; + }; + + eth_sleep_pins: eth-sleep-pins { + pins-txd { + pinmux = <PINMUX_GPIO77__FUNC_GPIO77>, + <PINMUX_GPIO78__FUNC_GPIO78>, + <PINMUX_GPIO79__FUNC_GPIO79>, + <PINMUX_GPIO80__FUNC_GPIO80>; + }; + pins-cc { + pinmux = <PINMUX_GPIO85__FUNC_GPIO85>, + <PINMUX_GPIO88__FUNC_GPIO88>, + <PINMUX_GPIO87__FUNC_GPIO87>, + <PINMUX_GPIO86__FUNC_GPIO86>; + }; + pins-rxd { + pinmux = <PINMUX_GPIO81__FUNC_GPIO81>, + <PINMUX_GPIO82__FUNC_GPIO82>, + <PINMUX_GPIO83__FUNC_GPIO83>, + <PINMUX_GPIO84__FUNC_GPIO84>; + }; + pins-mdio { + pinmux = <PINMUX_GPIO89__FUNC_GPIO89>, + <PINMUX_GPIO90__FUNC_GPIO90>; + input-disable; + bias-disable; + }; + }; + gpio_keys_pins: gpio-keys-pins { pins { pinmux = <PINMUX_GPIO106__FUNC_GPIO106>; diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi index 5d31536f4c48..28b3ebd145bf 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi @@ -1046,6 +1046,98 @@ spis1: spi@1101e000 { status = "disabled"; }; + eth: ethernet@11021000 { + compatible = "mediatek,mt8195-gmac", "snps,dwmac-5.10a"; + reg = <0 0x11021000 0 0x4000>; + interrupts = <GIC_SPI 716 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "macirq"; + clock-names = "axi", + "apb", + "mac_main", + "ptp_ref", + "rmii_internal", + "mac_cg"; + clocks = <&pericfg_ao CLK_PERI_AO_ETHERNET>, + <&pericfg_ao CLK_PERI_AO_ETHERNET_BUS>, + <&topckgen CLK_TOP_SNPS_ETH_250M>, + <&topckgen CLK_TOP_SNPS_ETH_62P4M_PTP>, + <&topckgen CLK_TOP_SNPS_ETH_50M_RMII>, + <&pericfg_ao CLK_PERI_AO_ETHERNET_MAC>; + assigned-clocks = <&topckgen CLK_TOP_SNPS_ETH_250M>, + <&topckgen CLK_TOP_SNPS_ETH_62P4M_PTP>, + <&topckgen CLK_TOP_SNPS_ETH_50M_RMII>; + assigned-clock-parents = <&topckgen CLK_TOP_ETHPLL_D2>, + <&topckgen CLK_TOP_ETHPLL_D8>, + <&topckgen CLK_TOP_ETHPLL_D10>; + power-domains = <&spm MT8195_POWER_DOMAIN_ETHER>; + mediatek,pericfg = <&infracfg_ao>; + snps,axi-config = <&stmmac_axi_setup>; + snps,mtl-rx-config = <&mtl_rx_setup>; + snps,mtl-tx-config = <&mtl_tx_setup>; + snps,txpbl = <16>; + snps,rxpbl = <16>; + snps,clk-csr = <0>; + status = "disabled"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; + + stmmac_axi_setup: stmmac-axi-config { + snps,wr_osr_lmt = <0x7>; + snps,rd_osr_lmt = <0x7>; + snps,blen = <0 0 0 0 16 8 4>; + }; + + mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <4>; + snps,rx-sched-sp; + queue0 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + }; + queue1 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + }; + queue2 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + }; + queue3 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + }; + }; + + mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <4>; + snps,tx-sched-wrr; + queue0 { + snps,weight = <0x10>; + snps,dcb-algorithm; + snps,priority = <0x0>; + }; + queue1 { + snps,weight = <0x11>; + snps,dcb-algorithm; + snps,priority = <0x1>; + }; + queue2 { + snps,weight = <0x12>; + snps,dcb-algorithm; + snps,priority = <0x2>; + }; + queue3 { + snps,weight = <0x13>; + snps,dcb-algorithm; + snps,priority = <0x3>; + }; + }; + }; + xhci0: usb@11200000 { compatible = "mediatek,mt8195-xhci", "mediatek,mtk-xhci"; -- 2.25.1 ^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH v8 2/2] arm64: dts: mt8195: Add Ethernet controller 2023-01-05 1:07 ` [PATCH v8 2/2] arm64: dts: mt8195: Add Ethernet controller Biao Huang @ 2023-01-19 18:19 ` Matthias Brugger 0 siblings, 0 replies; 7+ messages in thread From: Matthias Brugger @ 2023-01-19 18:19 UTC (permalink / raw) To: Biao Huang, Andrew Lunn, AngeloGioacchino Del Regno, Rob Herring, Krzysztof Kozlowski Cc: Giuseppe Cavallaro, Alexandre Torgue, Jose Abreu, David S . Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni, Maxime Coquelin, Richard Cochran, devicetree, linux-arm-kernel, linux-mediatek, linux-kernel, macpaul.lin, netdev On 05/01/2023 02:07, Biao Huang wrote: > Add Ethernet controller node for mt8195. > > Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> > Reviewed-by: Andrew Lunn <andrew@lunn.ch> > Signed-off-by: Biao Huang <biao.huang@mediatek.com> Applied, thanks! > --- > arch/arm64/boot/dts/mediatek/mt8195-demo.dts | 77 ++++++++++++++++ > arch/arm64/boot/dts/mediatek/mt8195.dtsi | 92 ++++++++++++++++++++ > 2 files changed, 169 insertions(+) > > diff --git a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts > index 4fbd99eb496a..6a48c135f0da 100644 > --- a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts > +++ b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts > @@ -78,6 +78,23 @@ optee_reserved: optee@43200000 { > }; > }; > > +ð { > + phy-mode ="rgmii-id"; > + phy-handle = <ðernet_phy0>; > + snps,reset-gpio = <&pio 93 GPIO_ACTIVE_HIGH>; > + snps,reset-delays-us = <0 10000 80000>; > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <ð_default_pins>; > + pinctrl-1 = <ð_sleep_pins>; > + status = "okay"; > + > + mdio { > + ethernet_phy0: ethernet-phy@1 { > + reg = <0x1>; > + }; > + }; > +}; > + > &i2c6 { > clock-frequency = <400000>; > pinctrl-0 = <&i2c6_pins>; > @@ -258,6 +275,66 @@ &mt6359_vsram_others_ldo_reg { > }; > > &pio { > + eth_default_pins: eth-default-pins { > + pins-txd { > + pinmux = <PINMUX_GPIO77__FUNC_GBE_TXD3>, > + <PINMUX_GPIO78__FUNC_GBE_TXD2>, > + <PINMUX_GPIO79__FUNC_GBE_TXD1>, > + <PINMUX_GPIO80__FUNC_GBE_TXD0>; > + drive-strength = <MTK_DRIVE_8mA>; > + }; > + pins-cc { > + pinmux = <PINMUX_GPIO85__FUNC_GBE_TXC>, > + <PINMUX_GPIO88__FUNC_GBE_TXEN>, > + <PINMUX_GPIO87__FUNC_GBE_RXDV>, > + <PINMUX_GPIO86__FUNC_GBE_RXC>; > + drive-strength = <MTK_DRIVE_8mA>; > + }; > + pins-rxd { > + pinmux = <PINMUX_GPIO81__FUNC_GBE_RXD3>, > + <PINMUX_GPIO82__FUNC_GBE_RXD2>, > + <PINMUX_GPIO83__FUNC_GBE_RXD1>, > + <PINMUX_GPIO84__FUNC_GBE_RXD0>; > + }; > + pins-mdio { > + pinmux = <PINMUX_GPIO89__FUNC_GBE_MDC>, > + <PINMUX_GPIO90__FUNC_GBE_MDIO>; > + input-enable; > + }; > + pins-power { > + pinmux = <PINMUX_GPIO91__FUNC_GPIO91>, > + <PINMUX_GPIO92__FUNC_GPIO92>; > + output-high; > + }; > + }; > + > + eth_sleep_pins: eth-sleep-pins { > + pins-txd { > + pinmux = <PINMUX_GPIO77__FUNC_GPIO77>, > + <PINMUX_GPIO78__FUNC_GPIO78>, > + <PINMUX_GPIO79__FUNC_GPIO79>, > + <PINMUX_GPIO80__FUNC_GPIO80>; > + }; > + pins-cc { > + pinmux = <PINMUX_GPIO85__FUNC_GPIO85>, > + <PINMUX_GPIO88__FUNC_GPIO88>, > + <PINMUX_GPIO87__FUNC_GPIO87>, > + <PINMUX_GPIO86__FUNC_GPIO86>; > + }; > + pins-rxd { > + pinmux = <PINMUX_GPIO81__FUNC_GPIO81>, > + <PINMUX_GPIO82__FUNC_GPIO82>, > + <PINMUX_GPIO83__FUNC_GPIO83>, > + <PINMUX_GPIO84__FUNC_GPIO84>; > + }; > + pins-mdio { > + pinmux = <PINMUX_GPIO89__FUNC_GPIO89>, > + <PINMUX_GPIO90__FUNC_GPIO90>; > + input-disable; > + bias-disable; > + }; > + }; > + > gpio_keys_pins: gpio-keys-pins { > pins { > pinmux = <PINMUX_GPIO106__FUNC_GPIO106>; > diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi > index 5d31536f4c48..28b3ebd145bf 100644 > --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi > +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi > @@ -1046,6 +1046,98 @@ spis1: spi@1101e000 { > status = "disabled"; > }; > > + eth: ethernet@11021000 { > + compatible = "mediatek,mt8195-gmac", "snps,dwmac-5.10a"; > + reg = <0 0x11021000 0 0x4000>; > + interrupts = <GIC_SPI 716 IRQ_TYPE_LEVEL_HIGH 0>; > + interrupt-names = "macirq"; > + clock-names = "axi", > + "apb", > + "mac_main", > + "ptp_ref", > + "rmii_internal", > + "mac_cg"; > + clocks = <&pericfg_ao CLK_PERI_AO_ETHERNET>, > + <&pericfg_ao CLK_PERI_AO_ETHERNET_BUS>, > + <&topckgen CLK_TOP_SNPS_ETH_250M>, > + <&topckgen CLK_TOP_SNPS_ETH_62P4M_PTP>, > + <&topckgen CLK_TOP_SNPS_ETH_50M_RMII>, > + <&pericfg_ao CLK_PERI_AO_ETHERNET_MAC>; > + assigned-clocks = <&topckgen CLK_TOP_SNPS_ETH_250M>, > + <&topckgen CLK_TOP_SNPS_ETH_62P4M_PTP>, > + <&topckgen CLK_TOP_SNPS_ETH_50M_RMII>; > + assigned-clock-parents = <&topckgen CLK_TOP_ETHPLL_D2>, > + <&topckgen CLK_TOP_ETHPLL_D8>, > + <&topckgen CLK_TOP_ETHPLL_D10>; > + power-domains = <&spm MT8195_POWER_DOMAIN_ETHER>; > + mediatek,pericfg = <&infracfg_ao>; > + snps,axi-config = <&stmmac_axi_setup>; > + snps,mtl-rx-config = <&mtl_rx_setup>; > + snps,mtl-tx-config = <&mtl_tx_setup>; > + snps,txpbl = <16>; > + snps,rxpbl = <16>; > + snps,clk-csr = <0>; > + status = "disabled"; > + > + mdio { > + compatible = "snps,dwmac-mdio"; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + > + stmmac_axi_setup: stmmac-axi-config { > + snps,wr_osr_lmt = <0x7>; > + snps,rd_osr_lmt = <0x7>; > + snps,blen = <0 0 0 0 16 8 4>; > + }; > + > + mtl_rx_setup: rx-queues-config { > + snps,rx-queues-to-use = <4>; > + snps,rx-sched-sp; > + queue0 { > + snps,dcb-algorithm; > + snps,map-to-dma-channel = <0x0>; > + }; > + queue1 { > + snps,dcb-algorithm; > + snps,map-to-dma-channel = <0x0>; > + }; > + queue2 { > + snps,dcb-algorithm; > + snps,map-to-dma-channel = <0x0>; > + }; > + queue3 { > + snps,dcb-algorithm; > + snps,map-to-dma-channel = <0x0>; > + }; > + }; > + > + mtl_tx_setup: tx-queues-config { > + snps,tx-queues-to-use = <4>; > + snps,tx-sched-wrr; > + queue0 { > + snps,weight = <0x10>; > + snps,dcb-algorithm; > + snps,priority = <0x0>; > + }; > + queue1 { > + snps,weight = <0x11>; > + snps,dcb-algorithm; > + snps,priority = <0x1>; > + }; > + queue2 { > + snps,weight = <0x12>; > + snps,dcb-algorithm; > + snps,priority = <0x2>; > + }; > + queue3 { > + snps,weight = <0x13>; > + snps,dcb-algorithm; > + snps,priority = <0x3>; > + }; > + }; > + }; > + > xhci0: usb@11200000 { > compatible = "mediatek,mt8195-xhci", > "mediatek,mtk-xhci"; ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v8 0/2] arm64: dts: mt8195: Add Ethernet controller 2023-01-05 1:07 [PATCH v8 0/2] arm64: dts: mt8195: Add Ethernet controller Biao Huang 2023-01-05 1:07 ` [PATCH v8 1/2] stmmac: dwmac-mediatek: remove the dwmac_fix_mac_speed Biao Huang 2023-01-05 1:07 ` [PATCH v8 2/2] arm64: dts: mt8195: Add Ethernet controller Biao Huang @ 2023-01-06 4:58 ` Jakub Kicinski 2023-01-11 5:49 ` Biao Huang (黄彪) 2023-01-06 5:10 ` patchwork-bot+netdevbpf 3 siblings, 1 reply; 7+ messages in thread From: Jakub Kicinski @ 2023-01-06 4:58 UTC (permalink / raw) To: Biao Huang Cc: Andrew Lunn, AngeloGioacchino Del Regno, Rob Herring, Krzysztof Kozlowski, Matthias Brugger, Giuseppe Cavallaro, Alexandre Torgue, Jose Abreu, David S . Miller, Eric Dumazet, Paolo Abeni, Maxime Coquelin, Richard Cochran, devicetree, linux-arm-kernel, linux-mediatek, linux-kernel, macpaul.lin, netdev On Thu, 5 Jan 2023 09:07:10 +0800 Biao Huang wrote: > Changes in v8: > 1. add reviewed-by as Andrew's comments. You don't have to repost just to include review/ack tags. They are automatically gathered by our patch application tooling when we apply patches to the tree. I will take patch 1 to the networking tree, I _think_ patch 2 is supposed to go via Matthias? ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v8 0/2] arm64: dts: mt8195: Add Ethernet controller 2023-01-06 4:58 ` [PATCH v8 0/2] " Jakub Kicinski @ 2023-01-11 5:49 ` Biao Huang (黄彪) 0 siblings, 0 replies; 7+ messages in thread From: Biao Huang (黄彪) @ 2023-01-11 5:49 UTC (permalink / raw) To: kuba, matthias.bgg Cc: andrew, linux-mediatek, robh+dt, linux-kernel, peppe.cavallaro, joabreu, devicetree, edumazet, alexandre.torgue, mcoquelin.stm32, pabeni, richardcochran, krzysztof.kozlowski+dt, Macpaul Lin (林智斌), linux-arm-kernel, davem, netdev, angelogioacchino.delregno On Thu, 2023-01-05 at 20:58 -0800, Jakub Kicinski wrote: > On Thu, 5 Jan 2023 09:07:10 +0800 Biao Huang wrote: > > Changes in v8: > > 1. add reviewed-by as Andrew's comments. > > You don't have to repost just to include review/ack tags. > They are automatically gathered by our patch application tooling > when we apply patches to the tree. OK, thanks for your kindly reminder~ > > I will take patch 1 to the networking tree, I _think_ patch 2 is > supposed to go via Matthias? OK, @Matthias, please kindly review patch 2 (dts patch). Best Regards! Biao ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [PATCH v8 0/2] arm64: dts: mt8195: Add Ethernet controller 2023-01-05 1:07 [PATCH v8 0/2] arm64: dts: mt8195: Add Ethernet controller Biao Huang ` (2 preceding siblings ...) 2023-01-06 4:58 ` [PATCH v8 0/2] " Jakub Kicinski @ 2023-01-06 5:10 ` patchwork-bot+netdevbpf 3 siblings, 0 replies; 7+ messages in thread From: patchwork-bot+netdevbpf @ 2023-01-06 5:10 UTC (permalink / raw) To: Biao Huang Cc: andrew, angelogioacchino.delregno, robh+dt, krzysztof.kozlowski+dt, matthias.bgg, peppe.cavallaro, alexandre.torgue, joabreu, davem, edumazet, kuba, pabeni, mcoquelin.stm32, richardcochran, devicetree, linux-arm-kernel, linux-mediatek, linux-kernel, macpaul.lin, netdev Hello: This series was applied to netdev/net.git (master) by Jakub Kicinski <kuba@kernel.org>: On Thu, 5 Jan 2023 09:07:10 +0800 you wrote: > Changes in v8: > 1. add reviewed-by as Andrew's comments. > > Changes in v7: > 1. move mdio node to .dtsi, and remove the compatible > property in ethernet-phy node as Andrew's comments. > 2. add netdev@ to cc list as Jakub's reminder. > > [...] Here is the summary with links: - [v8,1/2] stmmac: dwmac-mediatek: remove the dwmac_fix_mac_speed https://git.kernel.org/netdev/net/c/c26de7507d1f - [v8,2/2] arm64: dts: mt8195: Add Ethernet controller (no matching commit) You are awesome, thank you! -- Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2023-01-19 18:20 UTC | newest] Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2023-01-05 1:07 [PATCH v8 0/2] arm64: dts: mt8195: Add Ethernet controller Biao Huang 2023-01-05 1:07 ` [PATCH v8 1/2] stmmac: dwmac-mediatek: remove the dwmac_fix_mac_speed Biao Huang 2023-01-05 1:07 ` [PATCH v8 2/2] arm64: dts: mt8195: Add Ethernet controller Biao Huang 2023-01-19 18:19 ` Matthias Brugger 2023-01-06 4:58 ` [PATCH v8 0/2] " Jakub Kicinski 2023-01-11 5:49 ` Biao Huang (黄彪) 2023-01-06 5:10 ` patchwork-bot+netdevbpf
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).