* with kernel 5.4.6, two Eth interfaces -- one 'reliably named', the other not. used to work , what's changed?
@ 2019-12-24 19:24 PGNet Dev
2019-12-27 18:13 ` PGNet Dev
2019-12-27 21:35 ` Stephen Hemminger
0 siblings, 2 replies; 4+ messages in thread
From: PGNet Dev @ 2019-12-24 19:24 UTC (permalink / raw)
To: netdev
I recently upgraded a linux/64 box to
uname -rm
5.4.6-24.ge5f8301-default x86_64
For 'ages' prior, I've had two functional Eth interfaces on it
inxi -n
(1) Network: Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller driver: r8169
IF: eth0 state: down mac: 18:d6:c7:01:15:11
(2) Card-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller driver: r8169
IF: enp3s0 state: up speed: 1000 Mbps duplex: full mac: 00:52:35:50:44:04
where (2)'s the Mobo ETH, and (1)'s an ETH PCI-e card
Both expect/use the same driver,
lspci -tv | grep -i eth
+-04.0-[02]----00.0 Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
+-06.0-[03]----00.0 Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
The driver's up
lsmod | grep 8169
r8169 94208 0
libphy 98304 2 r8169,realtek
provided by
rpm -q --whatprovides /lib/modules/5.4.6-24.ge5f8301-default/kernel/drivers/net/ethernet/realtek/r8169.ko
kernel-default-5.4.6-24.1.ge5f8301.x86_64
the cards are available,
I've had reliable naming enabled
cat /proc/cmdline
... net.ifnames=1 biosdevname=0
and the two interfaces, Mobo & PCI, _had_ always appeared as enp2s0 & enp3s0
with current kernel,
uname -rm
5.4.6-24.ge5f8301-default x86_64
& firmware packages,
rpm -qa | grep -i kernel-firmware | sort
kernel-firmware-all-20191118-36.13.noarch
kernel-firmware-amdgpu-20191118-36.13.noarch
kernel-firmware-ath10k-20191118-36.13.noarch
kernel-firmware-atheros-20191118-36.13.noarch
kernel-firmware-bluetooth-20191118-36.13.noarch
kernel-firmware-bnx2-20191118-36.13.noarch
kernel-firmware-brcm-20191118-36.13.noarch
kernel-firmware-chelsio-20191118-36.13.noarch
kernel-firmware-dpaa2-20191118-36.13.noarch
kernel-firmware-i915-20191118-36.13.noarch
kernel-firmware-intel-20191118-36.13.noarch
kernel-firmware-iwlwifi-20191118-36.13.noarch
kernel-firmware-liquidio-20191118-36.13.noarch
kernel-firmware-marvell-20191118-36.13.noarch
kernel-firmware-media-20191118-36.13.noarch
kernel-firmware-mediatek-20191118-36.13.noarch
kernel-firmware-mellanox-20191118-36.13.noarch
kernel-firmware-mwifiex-20191118-36.13.noarch
kernel-firmware-network-20191118-36.13.noarch
kernel-firmware-nfp-20191118-36.13.noarch
kernel-firmware-nvidia-20191118-36.13.noarch
kernel-firmware-platform-20191118-36.13.noarch
kernel-firmware-qlogic-20191118-36.13.noarch
kernel-firmware-radeon-20191118-36.13.noarch
kernel-firmware-realtek-20191118-36.13.noarch
kernel-firmware-serial-20191118-36.13.noarch
kernel-firmware-sound-20191118-36.13.noarch
kernel-firmware-ti-20191118-36.13.noarch
kernel-firmware-ueagle-20191118-36.13.noarch
kernel-firmware-usb-network-20191118-36.13.noarch
The TPLINK PCI card no longer comes up as an 'en*'-named card, per
https://www.freedesktop.org/software/systemd/man/systemd.net-naming-scheme.html
but rather, incorrectly (?), as 'eth0'
hwinfo --netcard | egrep -i "Ethernet controller|Driver|addr|Model:|Device:|Device file"
07: PCI 300.0: 0200 Ethernet controller
Model: "Realtek RTL8111/8168 PCI Express Gigabit Ethernet controller"
Device: pci 0x8168 "RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller"
SubDevice: pci 0x8168 "RTL8111/8168 PCI Express Gigabit Ethernet controller"
Driver: "r8169"
Driver Modules: "r8169"
Device File: enp3s0
HW Address: 00:52:35:50:44:04
Permanent HW Address: 00:52:35:50:44:04
Driver Info #0:
Driver Status: r8169 is active
Driver Activation Cmd: "modprobe r8169"
11: PCI 200.0: 0200 Ethernet controller
Model: "TP-LINK TG-3468 Gigabit PCI Express Network Adapter"
Device: pci 0x8168 "RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller"
SubDevice: pci 0x3468 "TG-3468 Gigabit PCI Express Network Adapter"
Driver: "r8169"
Driver Modules: "r8169"
?? Device File: eth0
HW Address: 18:d6:c7:01:15:11
Permanent HW Address: 18:d6:c7:01:15:11
Driver Info #0:
Driver Status: r8169 is active
Driver Activation Cmd: "modprobe r8169"
noting,
ls -1 /sys/class/net/
enp3s0@
eth0@
lo@
in `dmesg`
dmesg | egrep -i "eth|enp"
[ 4.564854] r8169 0000:02:00.0 eth0: RTL8168e/8111e, 18:d6:c7:01:15:11, XID 2c2, IRQ 27
[ 4.564856] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 4.568641] r8169 0000:03:00.0 eth1: RTL8168c/8111c, 00:52:35:50:44:04, XID 3c4, IRQ 18
[ 4.568643] r8169 0000:03:00.0 eth1: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[ 4.614030] r8169 0000:03:00.0 enp3s0: renamed from eth1
[ 28.179613] RTL8211B Gigabit Ethernet r8169-300:00: attached PHY driver [RTL8211B Gigabit Ethernet] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
[ 28.283488] r8169 0000:03:00.0 enp3s0: Link is Down
[ 30.498955] r8169 0000:03:00.0 enp3s0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 30.498976] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
Something's changed -- as both interfaces used to be properly named per reliable-naming standard.
I _can_ bring up the network on the Mobo's renamed enp3s0 interface ... but no longer on the PCI card.
I'm not clear on why one interface IS using the reliable-naming scheme, and the other is NOT.
Any hints/clues as to the problem &/or a fix?
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: with kernel 5.4.6, two Eth interfaces -- one 'reliably named', the other not. used to work , what's changed?
2019-12-24 19:24 with kernel 5.4.6, two Eth interfaces -- one 'reliably named', the other not. used to work , what's changed? PGNet Dev
@ 2019-12-27 18:13 ` PGNet Dev
2019-12-27 21:35 ` Stephen Hemminger
1 sibling, 0 replies; 4+ messages in thread
From: PGNet Dev @ 2019-12-27 18:13 UTC (permalink / raw)
To: netdev
Sanity check -- Is this the right, or wrong, list for this question?
On 12/24/19 11:24 AM, PGNet Dev wrote:
> I recently upgraded a linux/64 box to
>
> uname -rm
> 5.4.6-24.ge5f8301-default x86_64
>
> For 'ages' prior, I've had two functional Eth interfaces on it
>
> inxi -n
> (1) Network: Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller driver: r8169
> IF: eth0 state: down mac: 18:d6:c7:01:15:11
> (2) Card-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller driver: r8169
> IF: enp3s0 state: up speed: 1000 Mbps duplex: full mac: 00:52:35:50:44:04
>
> where (2)'s the Mobo ETH, and (1)'s an ETH PCI-e card
>
> Both expect/use the same driver,
>
> lspci -tv | grep -i eth
> +-04.0-[02]----00.0 Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
> +-06.0-[03]----00.0 Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
>
>
> The driver's up
>
> lsmod | grep 8169
> r8169 94208 0
> libphy 98304 2 r8169,realtek
>
> provided by
>
> rpm -q --whatprovides /lib/modules/5.4.6-24.ge5f8301-default/kernel/drivers/net/ethernet/realtek/r8169.ko
> kernel-default-5.4.6-24.1.ge5f8301.x86_64
>
> the cards are available,
>
> I've had reliable naming enabled
>
> cat /proc/cmdline
> ... net.ifnames=1 biosdevname=0
>
> and the two interfaces, Mobo & PCI, _had_ always appeared as enp2s0 & enp3s0
>
> with current kernel,
>
> uname -rm
> 5.4.6-24.ge5f8301-default x86_64
>
> & firmware packages,
>
> rpm -qa | grep -i kernel-firmware | sort
> kernel-firmware-all-20191118-36.13.noarch
> kernel-firmware-amdgpu-20191118-36.13.noarch
> kernel-firmware-ath10k-20191118-36.13.noarch
> kernel-firmware-atheros-20191118-36.13.noarch
> kernel-firmware-bluetooth-20191118-36.13.noarch
> kernel-firmware-bnx2-20191118-36.13.noarch
> kernel-firmware-brcm-20191118-36.13.noarch
> kernel-firmware-chelsio-20191118-36.13.noarch
> kernel-firmware-dpaa2-20191118-36.13.noarch
> kernel-firmware-i915-20191118-36.13.noarch
> kernel-firmware-intel-20191118-36.13.noarch
> kernel-firmware-iwlwifi-20191118-36.13.noarch
> kernel-firmware-liquidio-20191118-36.13.noarch
> kernel-firmware-marvell-20191118-36.13.noarch
> kernel-firmware-media-20191118-36.13.noarch
> kernel-firmware-mediatek-20191118-36.13.noarch
> kernel-firmware-mellanox-20191118-36.13.noarch
> kernel-firmware-mwifiex-20191118-36.13.noarch
> kernel-firmware-network-20191118-36.13.noarch
> kernel-firmware-nfp-20191118-36.13.noarch
> kernel-firmware-nvidia-20191118-36.13.noarch
> kernel-firmware-platform-20191118-36.13.noarch
> kernel-firmware-qlogic-20191118-36.13.noarch
> kernel-firmware-radeon-20191118-36.13.noarch
> kernel-firmware-realtek-20191118-36.13.noarch
> kernel-firmware-serial-20191118-36.13.noarch
> kernel-firmware-sound-20191118-36.13.noarch
> kernel-firmware-ti-20191118-36.13.noarch
> kernel-firmware-ueagle-20191118-36.13.noarch
> kernel-firmware-usb-network-20191118-36.13.noarch
>
> The TPLINK PCI card no longer comes up as an 'en*'-named card, per
>
> https://www.freedesktop.org/software/systemd/man/systemd.net-naming-scheme.html
>
> but rather, incorrectly (?), as 'eth0'
>
> hwinfo --netcard | egrep -i "Ethernet controller|Driver|addr|Model:|Device:|Device file"
> 07: PCI 300.0: 0200 Ethernet controller
> Model: "Realtek RTL8111/8168 PCI Express Gigabit Ethernet controller"
> Device: pci 0x8168 "RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller"
> SubDevice: pci 0x8168 "RTL8111/8168 PCI Express Gigabit Ethernet controller"
> Driver: "r8169"
> Driver Modules: "r8169"
> Device File: enp3s0
> HW Address: 00:52:35:50:44:04
> Permanent HW Address: 00:52:35:50:44:04
> Driver Info #0:
> Driver Status: r8169 is active
> Driver Activation Cmd: "modprobe r8169"
> 11: PCI 200.0: 0200 Ethernet controller
> Model: "TP-LINK TG-3468 Gigabit PCI Express Network Adapter"
> Device: pci 0x8168 "RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller"
> SubDevice: pci 0x3468 "TG-3468 Gigabit PCI Express Network Adapter"
> Driver: "r8169"
> Driver Modules: "r8169"
> ?? Device File: eth0
> HW Address: 18:d6:c7:01:15:11
> Permanent HW Address: 18:d6:c7:01:15:11
> Driver Info #0:
> Driver Status: r8169 is active
> Driver Activation Cmd: "modprobe r8169"
>
> noting,
>
> ls -1 /sys/class/net/
> enp3s0@
> eth0@
> lo@
>
> in `dmesg`
>
> dmesg | egrep -i "eth|enp"
> [ 4.564854] r8169 0000:02:00.0 eth0: RTL8168e/8111e, 18:d6:c7:01:15:11, XID 2c2, IRQ 27
> [ 4.564856] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
> [ 4.568641] r8169 0000:03:00.0 eth1: RTL8168c/8111c, 00:52:35:50:44:04, XID 3c4, IRQ 18
> [ 4.568643] r8169 0000:03:00.0 eth1: jumbo features [frames: 6128 bytes, tx checksumming: ko]
> [ 4.614030] r8169 0000:03:00.0 enp3s0: renamed from eth1
> [ 28.179613] RTL8211B Gigabit Ethernet r8169-300:00: attached PHY driver [RTL8211B Gigabit Ethernet] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
> [ 28.283488] r8169 0000:03:00.0 enp3s0: Link is Down
> [ 30.498955] r8169 0000:03:00.0 enp3s0: Link is Up - 1Gbps/Full - flow control rx/tx
> [ 30.498976] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
>
> Something's changed -- as both interfaces used to be properly named per reliable-naming standard.
>
> I _can_ bring up the network on the Mobo's renamed enp3s0 interface ... but no longer on the PCI card.
>
> I'm not clear on why one interface IS using the reliable-naming scheme, and the other is NOT.
>
> Any hints/clues as to the problem &/or a fix?
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: with kernel 5.4.6, two Eth interfaces -- one 'reliably named', the other not. used to work , what's changed?
2019-12-24 19:24 with kernel 5.4.6, two Eth interfaces -- one 'reliably named', the other not. used to work , what's changed? PGNet Dev
2019-12-27 18:13 ` PGNet Dev
@ 2019-12-27 21:35 ` Stephen Hemminger
2019-12-27 21:38 ` PGNet Dev
1 sibling, 1 reply; 4+ messages in thread
From: Stephen Hemminger @ 2019-12-27 21:35 UTC (permalink / raw)
To: PGNet Dev; +Cc: netdev
On Tue, 24 Dec 2019 11:24:09 -0800
PGNet Dev <pgnet.dev@gmail.com> wrote:
> I recently upgraded a linux/64 box to
>
> uname -rm
> 5.4.6-24.ge5f8301-default x86_64
>
> For 'ages' prior, I've had two functional Eth interfaces on it
>
> inxi -n
> (1) Network: Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller driver: r8169
> IF: eth0 state: down mac: 18:d6:c7:01:15:11
> (2) Card-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller driver: r8169
> IF: enp3s0 state: up speed: 1000 Mbps duplex: full mac: 00:52:35:50:44:04
>
> where (2)'s the Mobo ETH, and (1)'s an ETH PCI-e card
>
> Both expect/use the same driver,
>
> lspci -tv | grep -i eth
> +-04.0-[02]----00.0 Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
> +-06.0-[03]----00.0 Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
>
>
> The driver's up
>
> lsmod | grep 8169
> r8169 94208 0
> libphy 98304 2 r8169,realtek
>
> provided by
>
> rpm -q --whatprovides /lib/modules/5.4.6-24.ge5f8301-default/kernel/drivers/net/ethernet/realtek/r8169.ko
> kernel-default-5.4.6-24.1.ge5f8301.x86_64
>
> the cards are available,
>
> I've had reliable naming enabled
>
> cat /proc/cmdline
> ... net.ifnames=1 biosdevname=0
>
> and the two interfaces, Mobo & PCI, _had_ always appeared as enp2s0 & enp3s0
>
> with current kernel,
>
> uname -rm
> 5.4.6-24.ge5f8301-default x86_64
>
> & firmware packages,
>
> rpm -qa | grep -i kernel-firmware | sort
> kernel-firmware-all-20191118-36.13.noarch
> kernel-firmware-amdgpu-20191118-36.13.noarch
> kernel-firmware-ath10k-20191118-36.13.noarch
> kernel-firmware-atheros-20191118-36.13.noarch
> kernel-firmware-bluetooth-20191118-36.13.noarch
> kernel-firmware-bnx2-20191118-36.13.noarch
> kernel-firmware-brcm-20191118-36.13.noarch
> kernel-firmware-chelsio-20191118-36.13.noarch
> kernel-firmware-dpaa2-20191118-36.13.noarch
> kernel-firmware-i915-20191118-36.13.noarch
> kernel-firmware-intel-20191118-36.13.noarch
> kernel-firmware-iwlwifi-20191118-36.13.noarch
> kernel-firmware-liquidio-20191118-36.13.noarch
> kernel-firmware-marvell-20191118-36.13.noarch
> kernel-firmware-media-20191118-36.13.noarch
> kernel-firmware-mediatek-20191118-36.13.noarch
> kernel-firmware-mellanox-20191118-36.13.noarch
> kernel-firmware-mwifiex-20191118-36.13.noarch
> kernel-firmware-network-20191118-36.13.noarch
> kernel-firmware-nfp-20191118-36.13.noarch
> kernel-firmware-nvidia-20191118-36.13.noarch
> kernel-firmware-platform-20191118-36.13.noarch
> kernel-firmware-qlogic-20191118-36.13.noarch
> kernel-firmware-radeon-20191118-36.13.noarch
> kernel-firmware-realtek-20191118-36.13.noarch
> kernel-firmware-serial-20191118-36.13.noarch
> kernel-firmware-sound-20191118-36.13.noarch
> kernel-firmware-ti-20191118-36.13.noarch
> kernel-firmware-ueagle-20191118-36.13.noarch
> kernel-firmware-usb-network-20191118-36.13.noarch
>
> The TPLINK PCI card no longer comes up as an 'en*'-named card, per
>
> https://www.freedesktop.org/software/systemd/man/systemd.net-naming-scheme.html
>
> but rather, incorrectly (?), as 'eth0'
>
> hwinfo --netcard | egrep -i "Ethernet controller|Driver|addr|Model:|Device:|Device file"
> 07: PCI 300.0: 0200 Ethernet controller
> Model: "Realtek RTL8111/8168 PCI Express Gigabit Ethernet controller"
> Device: pci 0x8168 "RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller"
> SubDevice: pci 0x8168 "RTL8111/8168 PCI Express Gigabit Ethernet controller"
> Driver: "r8169"
> Driver Modules: "r8169"
> Device File: enp3s0
> HW Address: 00:52:35:50:44:04
> Permanent HW Address: 00:52:35:50:44:04
> Driver Info #0:
> Driver Status: r8169 is active
> Driver Activation Cmd: "modprobe r8169"
> 11: PCI 200.0: 0200 Ethernet controller
> Model: "TP-LINK TG-3468 Gigabit PCI Express Network Adapter"
> Device: pci 0x8168 "RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller"
> SubDevice: pci 0x3468 "TG-3468 Gigabit PCI Express Network Adapter"
> Driver: "r8169"
> Driver Modules: "r8169"
> ?? Device File: eth0
> HW Address: 18:d6:c7:01:15:11
> Permanent HW Address: 18:d6:c7:01:15:11
> Driver Info #0:
> Driver Status: r8169 is active
> Driver Activation Cmd: "modprobe r8169"
>
> noting,
>
> ls -1 /sys/class/net/
> enp3s0@
> eth0@
> lo@
>
> in `dmesg`
>
> dmesg | egrep -i "eth|enp"
> [ 4.564854] r8169 0000:02:00.0 eth0: RTL8168e/8111e, 18:d6:c7:01:15:11, XID 2c2, IRQ 27
> [ 4.564856] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
> [ 4.568641] r8169 0000:03:00.0 eth1: RTL8168c/8111c, 00:52:35:50:44:04, XID 3c4, IRQ 18
> [ 4.568643] r8169 0000:03:00.0 eth1: jumbo features [frames: 6128 bytes, tx checksumming: ko]
> [ 4.614030] r8169 0000:03:00.0 enp3s0: renamed from eth1
> [ 28.179613] RTL8211B Gigabit Ethernet r8169-300:00: attached PHY driver [RTL8211B Gigabit Ethernet] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
> [ 28.283488] r8169 0000:03:00.0 enp3s0: Link is Down
> [ 30.498955] r8169 0000:03:00.0 enp3s0: Link is Up - 1Gbps/Full - flow control rx/tx
> [ 30.498976] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
>
> Something's changed -- as both interfaces used to be properly named per reliable-naming standard.
>
> I _can_ bring up the network on the Mobo's renamed enp3s0 interface ... but no longer on the PCI card.
>
> I'm not clear on why one interface IS using the reliable-naming scheme, and the other is NOT.
>
> Any hints/clues as to the problem &/or a fix?
>
Network renaming is not a kernel responsibility. This list is not directly relevant
to your issue.
Various user packages (usually systemd/udev) do this based on distribution.
The naming schemes mostly rely on information reported by sysfs, such as PCI address, slot or other
values. Look for any changes in that information that might cause naming to change. I.e one
version had PCI slot information, and the other did not.
Read the documentation here: https://www.freedesktop.org/software/systemd/man/systemd.net-naming-scheme.html
To see what the systemd policy is.
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: with kernel 5.4.6, two Eth interfaces -- one 'reliably named', the other not. used to work , what's changed?
2019-12-27 21:35 ` Stephen Hemminger
@ 2019-12-27 21:38 ` PGNet Dev
0 siblings, 0 replies; 4+ messages in thread
From: PGNet Dev @ 2019-12-27 21:38 UTC (permalink / raw)
To: Stephen Hemminger; +Cc: netdev
On 12/27/19 1:35 PM, Stephen Hemminger wrote:
> Network renaming is not a kernel responsibility. This list is not directly relevant
to your issue.
>
> Various user packages (usually systemd/udev) do this based on distribution.
ah, I'll find a different home for it then.
thx!!
> On Tue, 24 Dec 2019 11:24:09 -0800
> PGNet Dev <pgnet.dev@gmail.com> wrote:
>
>> I recently upgraded a linux/64 box to
>>
>> uname -rm
>> 5.4.6-24.ge5f8301-default x86_64
>>
>> For 'ages' prior, I've had two functional Eth interfaces on it
>>
>> inxi -n
>> (1) Network: Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller driver: r8169
>> IF: eth0 state: down mac: 18:d6:c7:01:15:11
>> (2) Card-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller driver: r8169
>> IF: enp3s0 state: up speed: 1000 Mbps duplex: full mac: 00:52:35:50:44:04
>>
>> where (2)'s the Mobo ETH, and (1)'s an ETH PCI-e card
>>
>> Both expect/use the same driver,
>>
>> lspci -tv | grep -i eth
>> +-04.0-[02]----00.0 Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
>> +-06.0-[03]----00.0 Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
>>
>>
>> The driver's up
>>
>> lsmod | grep 8169
>> r8169 94208 0
>> libphy 98304 2 r8169,realtek
>>
>> provided by
>>
>> rpm -q --whatprovides /lib/modules/5.4.6-24.ge5f8301-default/kernel/drivers/net/ethernet/realtek/r8169.ko
>> kernel-default-5.4.6-24.1.ge5f8301.x86_64
>>
>> the cards are available,
>>
>> I've had reliable naming enabled
>>
>> cat /proc/cmdline
>> ... net.ifnames=1 biosdevname=0
>>
>> and the two interfaces, Mobo & PCI, _had_ always appeared as enp2s0 & enp3s0
>>
>> with current kernel,
>>
>> uname -rm
>> 5.4.6-24.ge5f8301-default x86_64
>>
>> & firmware packages,
>>
>> rpm -qa | grep -i kernel-firmware | sort
>> kernel-firmware-all-20191118-36.13.noarch
>> kernel-firmware-amdgpu-20191118-36.13.noarch
>> kernel-firmware-ath10k-20191118-36.13.noarch
>> kernel-firmware-atheros-20191118-36.13.noarch
>> kernel-firmware-bluetooth-20191118-36.13.noarch
>> kernel-firmware-bnx2-20191118-36.13.noarch
>> kernel-firmware-brcm-20191118-36.13.noarch
>> kernel-firmware-chelsio-20191118-36.13.noarch
>> kernel-firmware-dpaa2-20191118-36.13.noarch
>> kernel-firmware-i915-20191118-36.13.noarch
>> kernel-firmware-intel-20191118-36.13.noarch
>> kernel-firmware-iwlwifi-20191118-36.13.noarch
>> kernel-firmware-liquidio-20191118-36.13.noarch
>> kernel-firmware-marvell-20191118-36.13.noarch
>> kernel-firmware-media-20191118-36.13.noarch
>> kernel-firmware-mediatek-20191118-36.13.noarch
>> kernel-firmware-mellanox-20191118-36.13.noarch
>> kernel-firmware-mwifiex-20191118-36.13.noarch
>> kernel-firmware-network-20191118-36.13.noarch
>> kernel-firmware-nfp-20191118-36.13.noarch
>> kernel-firmware-nvidia-20191118-36.13.noarch
>> kernel-firmware-platform-20191118-36.13.noarch
>> kernel-firmware-qlogic-20191118-36.13.noarch
>> kernel-firmware-radeon-20191118-36.13.noarch
>> kernel-firmware-realtek-20191118-36.13.noarch
>> kernel-firmware-serial-20191118-36.13.noarch
>> kernel-firmware-sound-20191118-36.13.noarch
>> kernel-firmware-ti-20191118-36.13.noarch
>> kernel-firmware-ueagle-20191118-36.13.noarch
>> kernel-firmware-usb-network-20191118-36.13.noarch
>>
>> The TPLINK PCI card no longer comes up as an 'en*'-named card, per
>>
>> https://www.freedesktop.org/software/systemd/man/systemd.net-naming-scheme.html
>>
>> but rather, incorrectly (?), as 'eth0'
>>
>> hwinfo --netcard | egrep -i "Ethernet controller|Driver|addr|Model:|Device:|Device file"
>> 07: PCI 300.0: 0200 Ethernet controller
>> Model: "Realtek RTL8111/8168 PCI Express Gigabit Ethernet controller"
>> Device: pci 0x8168 "RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller"
>> SubDevice: pci 0x8168 "RTL8111/8168 PCI Express Gigabit Ethernet controller"
>> Driver: "r8169"
>> Driver Modules: "r8169"
>> Device File: enp3s0
>> HW Address: 00:52:35:50:44:04
>> Permanent HW Address: 00:52:35:50:44:04
>> Driver Info #0:
>> Driver Status: r8169 is active
>> Driver Activation Cmd: "modprobe r8169"
>> 11: PCI 200.0: 0200 Ethernet controller
>> Model: "TP-LINK TG-3468 Gigabit PCI Express Network Adapter"
>> Device: pci 0x8168 "RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller"
>> SubDevice: pci 0x3468 "TG-3468 Gigabit PCI Express Network Adapter"
>> Driver: "r8169"
>> Driver Modules: "r8169"
>> ?? Device File: eth0
>> HW Address: 18:d6:c7:01:15:11
>> Permanent HW Address: 18:d6:c7:01:15:11
>> Driver Info #0:
>> Driver Status: r8169 is active
>> Driver Activation Cmd: "modprobe r8169"
>>
>> noting,
>>
>> ls -1 /sys/class/net/
>> enp3s0@
>> eth0@
>> lo@
>>
>> in `dmesg`
>>
>> dmesg | egrep -i "eth|enp"
>> [ 4.564854] r8169 0000:02:00.0 eth0: RTL8168e/8111e, 18:d6:c7:01:15:11, XID 2c2, IRQ 27
>> [ 4.564856] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
>> [ 4.568641] r8169 0000:03:00.0 eth1: RTL8168c/8111c, 00:52:35:50:44:04, XID 3c4, IRQ 18
>> [ 4.568643] r8169 0000:03:00.0 eth1: jumbo features [frames: 6128 bytes, tx checksumming: ko]
>> [ 4.614030] r8169 0000:03:00.0 enp3s0: renamed from eth1
>> [ 28.179613] RTL8211B Gigabit Ethernet r8169-300:00: attached PHY driver [RTL8211B Gigabit Ethernet] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
>> [ 28.283488] r8169 0000:03:00.0 enp3s0: Link is Down
>> [ 30.498955] r8169 0000:03:00.0 enp3s0: Link is Up - 1Gbps/Full - flow control rx/tx
>> [ 30.498976] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
>>
>> Something's changed -- as both interfaces used to be properly named per reliable-naming standard.
>>
>> I _can_ bring up the network on the Mobo's renamed enp3s0 interface ... but no longer on the PCI card.
>>
>> I'm not clear on why one interface IS using the reliable-naming scheme, and the other is NOT.
>>
>> Any hints/clues as to the problem &/or a fix?
>>
>
> Network renaming is not a kernel responsibility. This list is not directly relevant
> to your issue.
>
> Various user packages (usually systemd/udev) do this based on distribution.
>
> The naming schemes mostly rely on information reported by sysfs, such as PCI address, slot or other
> values. Look for any changes in that information that might cause naming to change. I.e one
> version had PCI slot information, and the other did not.
>
> Read the documentation here: https://www.freedesktop.org/software/systemd/man/systemd.net-naming-scheme.html
> To see what the systemd policy is.
>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-12-27 21:38 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-12-24 19:24 with kernel 5.4.6, two Eth interfaces -- one 'reliably named', the other not. used to work , what's changed? PGNet Dev
2019-12-27 18:13 ` PGNet Dev
2019-12-27 21:35 ` Stephen Hemminger
2019-12-27 21:38 ` PGNet Dev
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).