* [PATCH net-next 5/5] net: sh_eth: use NAPI
@ 2012-06-12 5:19 Shimoda, Yoshihiro
2012-06-12 5:48 ` Eric Dumazet
0 siblings, 1 reply; 3+ messages in thread
From: Shimoda, Yoshihiro @ 2012-06-12 5:19 UTC (permalink / raw)
To: netdev; +Cc: SH-Linux
This patch modifies the driver to use NAPI.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
---
drivers/net/ethernet/renesas/sh_eth.c | 102 +++++++++++++++++++++------------
drivers/net/ethernet/renesas/sh_eth.h | 3 +
2 files changed, 68 insertions(+), 37 deletions(-)
diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c
index c64a31c..1584cda 100644
--- a/drivers/net/ethernet/renesas/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -1035,7 +1035,7 @@ static int sh_eth_txfree(struct net_device *ndev)
}
/* Packet receive function */
-static int sh_eth_rx(struct net_device *ndev)
+static int sh_eth_rx(struct net_device *ndev, int *work, int budget)
{
struct sh_eth_private *mdp = netdev_priv(ndev);
struct sh_eth_rxdesc *rxdesc;
@@ -1047,7 +1047,8 @@ static int sh_eth_rx(struct net_device *ndev)
u32 desc_status;
rxdesc = &mdp->rx_ring[entry];
- while (!(rxdesc->status & cpu_to_edmac(mdp, RD_RACT))) {
+ while (!(rxdesc->status & cpu_to_edmac(mdp, RD_RACT)) &&
+ *work < budget) {
desc_status = edmac_to_cpu(mdp, rxdesc->status);
pkt_len = rxdesc->frame_length;
@@ -1087,13 +1088,14 @@ static int sh_eth_rx(struct net_device *ndev)
skb_reserve(skb, NET_IP_ALIGN);
skb_put(skb, pkt_len);
skb->protocol = eth_type_trans(skb, ndev);
- netif_rx(skb);
+ netif_receive_skb(skb);
ndev->stats.rx_packets++;
ndev->stats.rx_bytes += pkt_len;
}
rxdesc->status |= cpu_to_edmac(mdp, RD_RACT);
entry = (++mdp->cur_rx) % mdp->num_rx_ring;
rxdesc = &mdp->rx_ring[entry];
+ (*work)++;
}
/* Refill the Rx ring buffers. */
@@ -1125,7 +1127,7 @@ static int sh_eth_rx(struct net_device *ndev)
/* Restart Rx engine if stopped. */
/* If we don't need to check status, don't. -KDU */
- if (!(sh_eth_read(ndev, EDRRR) & EDRRR_R)) {
+ if (*work < budget && !(sh_eth_read(ndev, EDRRR) & EDRRR_R)) {
/* fix the values for the next receiving */
mdp->cur_rx = mdp->dirty_rx = (sh_eth_read(ndev, RDFAR) -
sh_eth_read(ndev, RDLAR)) >> 4;
@@ -1281,38 +1283,61 @@ static irqreturn_t sh_eth_interrupt(int irq, void *netdev)
/* Get interrpt stat */
intr_status = sh_eth_read(ndev, EESR);
- /* Clear interrupt */
if (intr_status & (EESR_FRC | EESR_RMAF | EESR_RRF |
EESR_RTLF | EESR_RTSF | EESR_PRE | EESR_CERF |
cd->tx_check | cd->eesr_err_check)) {
- sh_eth_write(ndev, intr_status, EESR);
+ if (napi_schedule_prep(&mdp->napi)) {
+ /* Disable interrupts of the channel */
+ sh_eth_write(ndev, 0, EESIPR);
+ __napi_schedule(&mdp->napi);
+ }
ret = IRQ_HANDLED;
- } else
- goto other_irq;
-
- if (intr_status & (EESR_FRC | /* Frame recv*/
- EESR_RMAF | /* Multi cast address recv*/
- EESR_RRF | /* Bit frame recv */
- EESR_RTLF | /* Long frame recv*/
- EESR_RTSF | /* short frame recv */
- EESR_PRE | /* PHY-LSI recv error */
- EESR_CERF)){ /* recv frame CRC error */
- sh_eth_rx(ndev);
}
- /* Tx Check */
- if (intr_status & cd->tx_check) {
- sh_eth_txfree(ndev);
- netif_wake_queue(ndev);
+ spin_unlock(&mdp->lock);
+
+ return ret;
+}
+
+static int sh_eth_poll(struct napi_struct *napi, int budget)
+{
+ struct sh_eth_private *mdp = container_of(napi, struct sh_eth_private,
+ napi);
+ struct net_device *ndev = mdp->ndev;
+ struct sh_eth_cpu_data *cd = mdp->cd;
+ int work_done = 0, txfree_num;
+ u32 intr_status = sh_eth_read(ndev, EESR);
+
+ /* Clear interrupt flags */
+ sh_eth_write(ndev, intr_status, EESR);
+
+ /* check txdesc */
+ txfree_num = sh_eth_txfree(ndev);
+ if (txfree_num) {
+ netif_tx_lock(ndev);
+ if (netif_queue_stopped(ndev))
+ netif_wake_queue(ndev);
+ netif_tx_unlock(ndev);
}
+ /* check rxdesc */
+ sh_eth_rx(ndev, &work_done, budget);
+
+ /* check error flags */
if (intr_status & cd->eesr_err_check)
sh_eth_error(ndev, intr_status);
-other_irq:
- spin_unlock(&mdp->lock);
+ /* get current interrupt flags */
+ intr_status = sh_eth_read(ndev, EESR);
- return ret;
+ /* check whether this driver should call napi_complete() */
+ if (work_done < budget) {
+ napi_complete(napi);
+ /* Enable all interrupts */
+ sh_eth_write(ndev, cd->eesipr_value, EESIPR);
+ }
+
+ return work_done;
}
/* PHY state control function */
@@ -1545,6 +1570,7 @@ static int sh_eth_set_ringparam(struct net_device *ndev,
/* Stop the chip's Tx and Rx processes. */
sh_eth_write(ndev, 0, EDTRR);
sh_eth_write(ndev, 0, EDRRR);
+ napi_disable(&mdp->napi);
synchronize_irq(ndev->irq);
}
@@ -1569,6 +1595,7 @@ static int sh_eth_set_ringparam(struct net_device *ndev,
}
if (netif_running(ndev)) {
+ napi_enable(&mdp->napi);
sh_eth_write(ndev, mdp->cd->eesipr_value, EESIPR);
/* Setting the Rx mode will start the Rx process. */
sh_eth_write(ndev, EDRRR_R, EDRRR);
@@ -1600,6 +1627,8 @@ static int sh_eth_open(struct net_device *ndev)
pm_runtime_get_sync(&mdp->pdev->dev);
+ napi_enable(&mdp->napi);
+
ret = request_irq(ndev->irq, sh_eth_interrupt,
#if defined(CONFIG_CPU_SUBTYPE_SH7763) || \
defined(CONFIG_CPU_SUBTYPE_SH7764) || \
@@ -1678,19 +1707,6 @@ static int sh_eth_start_xmit(struct sk_buff *skb, struct net_device *ndev)
struct sh_eth_private *mdp = netdev_priv(ndev);
struct sh_eth_txdesc *txdesc;
u32 entry;
- unsigned long flags;
-
- spin_lock_irqsave(&mdp->lock, flags);
- if ((mdp->cur_tx - mdp->dirty_tx) >= (mdp->num_tx_ring - 4)) {
- if (!sh_eth_txfree(ndev)) {
- if (netif_msg_tx_queued(mdp))
- dev_warn(&ndev->dev, "TxFD exhausted.\n");
- netif_stop_queue(ndev);
- spin_unlock_irqrestore(&mdp->lock, flags);
- return NETDEV_TX_BUSY;
- }
- }
- spin_unlock_irqrestore(&mdp->lock, flags);
entry = mdp->cur_tx % mdp->num_tx_ring;
mdp->tx_skbuff[entry] = skb;
@@ -1716,6 +1732,13 @@ static int sh_eth_start_xmit(struct sk_buff *skb, struct net_device *ndev)
if (!(sh_eth_read(ndev, EDTRR) & sh_eth_get_edtrr_trns(mdp)))
sh_eth_write(ndev, sh_eth_get_edtrr_trns(mdp), EDTRR);
+ if ((mdp->cur_tx - mdp->dirty_tx) >= (mdp->num_tx_ring - 4)) {
+ if (netif_msg_tx_queued(mdp)) {
+ dev_warn(&ndev->dev, "TxFD exhausted.\n");
+ netif_stop_queue(ndev);
+ }
+ }
+
return NETDEV_TX_OK;
}
@@ -1739,6 +1762,8 @@ static int sh_eth_close(struct net_device *ndev)
phy_disconnect(mdp->phydev);
}
+ napi_disable(&mdp->napi);
+
free_irq(ndev->irq, ndev);
/* Free all the skbuffs in the Rx queue. */
@@ -2368,6 +2393,9 @@ static int sh_eth_drv_probe(struct platform_device *pdev)
#endif
sh_eth_set_default_cpu_data(mdp->cd);
+ mdp->ndev = ndev;
+ netif_napi_add(ndev, &mdp->napi, sh_eth_poll, SH_ETH_NAPI_WEIGHT);
+
/* set function */
ndev->netdev_ops = &sh_eth_netdev_ops;
SET_ETHTOOL_OPS(ndev, &sh_eth_ethtool_ops);
diff --git a/drivers/net/ethernet/renesas/sh_eth.h b/drivers/net/ethernet/renesas/sh_eth.h
index f1dbc27..93dad7b 100644
--- a/drivers/net/ethernet/renesas/sh_eth.h
+++ b/drivers/net/ethernet/renesas/sh_eth.h
@@ -35,6 +35,7 @@
#define PKT_BUF_SZ 1538
#define SH_ETH_TSU_TIMEOUT_MS 500
#define SH_ETH_TSU_CAM_ENTRIES 32
+#define SH_ETH_NAPI_WEIGHT 32
enum {
/* E-DMAC registers */
@@ -728,6 +729,8 @@ struct sh_eth_private {
int duplex;
int port; /* for TSU */
int vlan_num_ids; /* for VLAN tag filter */
+ struct napi_struct napi;
+ struct net_device *ndev;
unsigned no_ether_link:1;
unsigned ether_link_active_low:1;
--
1.7.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH net-next 5/5] net: sh_eth: use NAPI
2012-06-12 5:19 [PATCH net-next 5/5] net: sh_eth: use NAPI Shimoda, Yoshihiro
@ 2012-06-12 5:48 ` Eric Dumazet
2012-06-12 6:47 ` Shimoda, Yoshihiro
0 siblings, 1 reply; 3+ messages in thread
From: Eric Dumazet @ 2012-06-12 5:48 UTC (permalink / raw)
To: Shimoda, Yoshihiro; +Cc: netdev, SH-Linux
On Tue, 2012-06-12 at 14:19 +0900, Shimoda, Yoshihiro wrote:
> This patch modifies the driver to use NAPI.
>
...
> +static int sh_eth_poll(struct napi_struct *napi, int budget)
> +{
> + struct sh_eth_private *mdp = container_of(napi, struct sh_eth_private,
> + napi);
> + struct net_device *ndev = mdp->ndev;
> + struct sh_eth_cpu_data *cd = mdp->cd;
> + int work_done = 0, txfree_num;
> + u32 intr_status = sh_eth_read(ndev, EESR);
> +
> + /* Clear interrupt flags */
> + sh_eth_write(ndev, intr_status, EESR);
> +
> + /* check txdesc */
> + txfree_num = sh_eth_txfree(ndev);
> + if (txfree_num) {
> + netif_tx_lock(ndev);
> + if (netif_queue_stopped(ndev))
> + netif_wake_queue(ndev);
> + netif_tx_unlock(ndev);
> }
...
> @@ -1678,19 +1707,6 @@ static int sh_eth_start_xmit(struct sk_buff *skb, struct net_device *ndev)
> struct sh_eth_private *mdp = netdev_priv(ndev);
> struct sh_eth_txdesc *txdesc;
> u32 entry;
> - unsigned long flags;
> -
> - spin_lock_irqsave(&mdp->lock, flags);
> - if ((mdp->cur_tx - mdp->dirty_tx) >= (mdp->num_tx_ring - 4)) {
> - if (!sh_eth_txfree(ndev)) {
> - if (netif_msg_tx_queued(mdp))
> - dev_warn(&ndev->dev, "TxFD exhausted.\n");
> - netif_stop_queue(ndev);
> - spin_unlock_irqrestore(&mdp->lock, flags);
> - return NETDEV_TX_BUSY;
> - }
> - }
> - spin_unlock_irqrestore(&mdp->lock, flags);
>
> entry = mdp->cur_tx % mdp->num_tx_ring;
> mdp->tx_skbuff[entry] = skb;
> @@ -1716,6 +1732,13 @@ static int sh_eth_start_xmit(struct sk_buff *skb, struct net_device *ndev)
> if (!(sh_eth_read(ndev, EDTRR) & sh_eth_get_edtrr_trns(mdp)))
> sh_eth_write(ndev, sh_eth_get_edtrr_trns(mdp), EDTRR);
>
> + if ((mdp->cur_tx - mdp->dirty_tx) >= (mdp->num_tx_ring - 4)) {
> + if (netif_msg_tx_queued(mdp)) {
> + dev_warn(&ndev->dev, "TxFD exhausted.\n");
> + netif_stop_queue(ndev);
> + }
> + }
> +
> return NETDEV_TX_OK;
> }
I have no idea why you call netif_stop_queue() only if
netif_msg_tx_queued(mdp)
You should test your driver under heavy TX load.
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH net-next 5/5] net: sh_eth: use NAPI
2012-06-12 5:48 ` Eric Dumazet
@ 2012-06-12 6:47 ` Shimoda, Yoshihiro
0 siblings, 0 replies; 3+ messages in thread
From: Shimoda, Yoshihiro @ 2012-06-12 6:47 UTC (permalink / raw)
To: Eric Dumazet; +Cc: netdev, SH-Linux
2012/06/12 14:48, Eric Dumazet wrote:
> On Tue, 2012-06-12 at 14:19 +0900, Shimoda, Yoshihiro wrote:
< snip >
>> + if ((mdp->cur_tx - mdp->dirty_tx) >= (mdp->num_tx_ring - 4)) {
>> + if (netif_msg_tx_queued(mdp)) {
>> + dev_warn(&ndev->dev, "TxFD exhausted.\n");
>> + netif_stop_queue(ndev);
>> + }
>> + }
>> +
>> return NETDEV_TX_OK;
>> }
>
>
> I have no idea why you call netif_stop_queue() only if
> netif_msg_tx_queued(mdp)
>
> You should test your driver under heavy TX load.
>
Thank you for the point.
I checked the netif-msg.txt about netif_msg_tx_queued(). It is one of
the network interface message level setting. So, the driver's behavior
should not be changed by the level, I think.
I will modify the patch.
Best regards,
Yoshihiro Shimoda
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2012-06-12 6:47 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-06-12 5:19 [PATCH net-next 5/5] net: sh_eth: use NAPI Shimoda, Yoshihiro
2012-06-12 5:48 ` Eric Dumazet
2012-06-12 6:47 ` Shimoda, Yoshihiro
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).