[PATCH 00/29] treewide: Convert comma separated statements

[PATCH 00/29] treewide: Convert comma separated statements

[Joe Perches]

There are many comma separated statements in the kernel.
See:https://lore.kernel.org/lkml/alpine.DEB.2.22.394.2008201856110.2524@hadrien/

Convert the comma separated statements that are in if/do/while blocks
to use braces and semicolons.

Many comma separated statements still exist but those are changes for
another day.

Joe Perches (29):
  coding-style.rst: Avoid comma statements
  alpha: Avoid comma separated statements
  ia64: Avoid comma separated statements
  sparc: Avoid comma separated statements
  ata: Avoid comma separated statements
  drbd: Avoid comma separated statements
  lp: Avoid comma separated statements
  dma-buf: Avoid comma separated statements
  drm/gma500: Avoid comma separated statements
  drm/i915: Avoid comma separated statements
  hwmon: (scmi-hwmon): Avoid comma separated statements
  Input: MT - Avoid comma separated statements
  bcache: Avoid comma separated statements
  media: Avoid comma separated statements
  mtd: Avoid comma separated statements
  8390: Avoid comma separated statements
  fs_enet: Avoid comma separated statements
  wan: sbni: Avoid comma separated statements
  s390/tty3270: Avoid comma separated statements
  scai/arm: Avoid comma separated statements
  media: atomisp: Avoid comma separated statements
  video: fbdev: Avoid comma separated statements
  fuse: Avoid comma separated statements
  reiserfs: Avoid comma separated statements
  lib/zlib: Avoid comma separated statements
  lib: zstd: Avoid comma separated statements
  ipv6: fib6: Avoid comma separated statements
  sunrpc: Avoid comma separated statements
  tools: Avoid comma separated statements

 Documentation/process/coding-style.rst        |  17 +
 arch/alpha/kernel/pci_iommu.c                 |   8 +-
 arch/alpha/oprofile/op_model_ev4.c            |  22 +-
 arch/alpha/oprofile/op_model_ev5.c            |   8 +-
 arch/ia64/kernel/smpboot.c                    |   7 +-
 arch/sparc/kernel/smp_64.c                    |   7 +-
 drivers/ata/pata_icside.c                     |  21 +-
 drivers/block/drbd/drbd_receiver.c            |   6 +-
 drivers/char/lp.c                             |   6 +-
 drivers/dma-buf/st-dma-fence.c                |   7 +-
 drivers/gpu/drm/gma500/mdfld_intel_display.c  |  44 ++-
 drivers/gpu/drm/i915/gt/gen8_ppgtt.c          |   8 +-
 drivers/gpu/drm/i915/gt/intel_gt_requests.c   |   6 +-
 .../gpu/drm/i915/gt/selftest_workarounds.c    |   6 +-
 drivers/gpu/drm/i915/intel_runtime_pm.c       |   6 +-
 drivers/hwmon/scmi-hwmon.c                    |   6 +-
 drivers/input/input-mt.c                      |  11 +-
 drivers/md/bcache/bset.c                      |  12 +-
 drivers/md/bcache/sysfs.c                     |   6 +-
 drivers/media/i2c/msp3400-kthreads.c          |  12 +-
 drivers/media/pci/bt8xx/bttv-cards.c          |   6 +-
 drivers/media/pci/saa7134/saa7134-video.c     |   7 +-
 drivers/mtd/devices/lart.c                    |  10 +-
 drivers/net/ethernet/8390/axnet_cs.c          |  19 +-
 drivers/net/ethernet/8390/lib8390.c           |  14 +-
 drivers/net/ethernet/8390/pcnet_cs.c          |   6 +-
 .../ethernet/freescale/fs_enet/fs_enet-main.c |  11 +-
 drivers/net/wan/sbni.c                        | 101 +++---
 drivers/s390/char/tty3270.c                   |   6 +-
 drivers/scsi/arm/cumana_2.c                   |  19 +-
 drivers/scsi/arm/eesox.c                      |   9 +-
 drivers/scsi/arm/powertec.c                   |   9 +-
 .../media/atomisp/pci/atomisp_subdev.c        |   6 +-
 drivers/video/fbdev/tgafb.c                   |  12 +-
 fs/fuse/dir.c                                 |  24 +-
 fs/reiserfs/fix_node.c                        |  36 ++-
 lib/zlib_deflate/deftree.c                    |  49 ++-
 lib/zstd/compress.c                           | 120 ++++---
 lib/zstd/fse_compress.c                       |  24 +-
 lib/zstd/huf_compress.c                       |   6 +-
 net/ipv6/ip6_fib.c                            |  12 +-
 net/sunrpc/sysctl.c                           |   6 +-
 tools/lib/subcmd/help.c                       |  10 +-
 tools/power/cpupower/utils/cpufreq-set.c      |  14 +-
 tools/testing/selftests/vm/gup_benchmark.c    |  18 +-
 tools/testing/selftests/vm/userfaultfd.c      | 296 +++++++++++-------
 46 files changed, 694 insertions(+), 382 deletions(-)

-- 
2.26.0

[PATCH 16/29] 8390: Avoid comma separated statements

[Joe Perches]

Use semicolons and braces.

Signed-off-by: Joe Perches <joe@perches.com>
---
 drivers/net/ethernet/8390/axnet_cs.c | 19 ++++++++++++-------
 drivers/net/ethernet/8390/lib8390.c  | 14 +++++++++-----
 drivers/net/ethernet/8390/pcnet_cs.c |  6 ++++--
 3 files changed, 25 insertions(+), 14 deletions(-)

diff --git a/drivers/net/ethernet/8390/axnet_cs.c b/drivers/net/ethernet/8390/axnet_cs.c
index a00b36f91d9f..d041b6dda012 100644
--- a/drivers/net/ethernet/8390/axnet_cs.c
+++ b/drivers/net/ethernet/8390/axnet_cs.c
@@ -657,8 +657,10 @@ static void block_input(struct net_device *dev, int count,
     outb_p(E8390_RREAD+E8390_START, nic_base + AXNET_CMD);
 
     insw(nic_base + AXNET_DATAPORT,buf,count>>1);
-    if (count & 0x01)
-	buf[count-1] = inb(nic_base + AXNET_DATAPORT), xfer_count++;
+    if (count & 0x01) {
+	buf[count-1] = inb(nic_base + AXNET_DATAPORT);
+	xfer_count++;
+    }
 
 }
 
@@ -1270,10 +1272,12 @@ static void ei_tx_intr(struct net_device *dev)
 			ei_local->txing = 1;
 			NS8390_trigger_send(dev, ei_local->tx2, ei_local->tx_start_page + 6);
 			netif_trans_update(dev);
-			ei_local->tx2 = -1,
+			ei_local->tx2 = -1;
 			ei_local->lasttx = 2;
-		}
-		else ei_local->lasttx = 20, ei_local->txing = 0;	
+		} else {
+			ei_local->lasttx = 20;
+			ei_local->txing = 0;
+		}	
 	}
 	else if (ei_local->tx2 < 0) 
 	{
@@ -1289,9 +1293,10 @@ static void ei_tx_intr(struct net_device *dev)
 			netif_trans_update(dev);
 			ei_local->tx1 = -1;
 			ei_local->lasttx = 1;
+		} else {
+			ei_local->lasttx = 10;
+			ei_local->txing = 0;
 		}
-		else
-			ei_local->lasttx = 10, ei_local->txing = 0;
 	}
 //	else
 //		netdev_warn(dev, "unexpected TX-done interrupt, lasttx=%d\n",
diff --git a/drivers/net/ethernet/8390/lib8390.c b/drivers/net/ethernet/8390/lib8390.c
index babc92e2692e..1f48d7f6365c 100644
--- a/drivers/net/ethernet/8390/lib8390.c
+++ b/drivers/net/ethernet/8390/lib8390.c
@@ -597,10 +597,12 @@ static void ei_tx_intr(struct net_device *dev)
 			ei_local->txing = 1;
 			NS8390_trigger_send(dev, ei_local->tx2, ei_local->tx_start_page + 6);
 			netif_trans_update(dev);
-			ei_local->tx2 = -1,
+			ei_local->tx2 = -1;
 			ei_local->lasttx = 2;
-		} else
-			ei_local->lasttx = 20, ei_local->txing = 0;
+		} else {
+			ei_local->lasttx = 20;
+			ei_local->txing = 0;
+		}
 	} else if (ei_local->tx2 < 0) {
 		if (ei_local->lasttx != 2  &&  ei_local->lasttx != -2)
 			pr_err("%s: bogus last_tx_buffer %d, tx2=%d\n",
@@ -612,8 +614,10 @@ static void ei_tx_intr(struct net_device *dev)
 			netif_trans_update(dev);
 			ei_local->tx1 = -1;
 			ei_local->lasttx = 1;
-		} else
-			ei_local->lasttx = 10, ei_local->txing = 0;
+		} else {
+			ei_local->lasttx = 10;
+			ei_local->txing = 0;
+		}
 	} /* else
 		netdev_warn(dev, "unexpected TX-done interrupt, lasttx=%d\n",
 			    ei_local->lasttx);
diff --git a/drivers/net/ethernet/8390/pcnet_cs.c b/drivers/net/ethernet/8390/pcnet_cs.c
index 164c3ed550bf..9d3b1e0e425c 100644
--- a/drivers/net/ethernet/8390/pcnet_cs.c
+++ b/drivers/net/ethernet/8390/pcnet_cs.c
@@ -1178,8 +1178,10 @@ static void dma_block_input(struct net_device *dev, int count,
     outb_p(E8390_RREAD+E8390_START, nic_base + PCNET_CMD);
 
     insw(nic_base + PCNET_DATAPORT,buf,count>>1);
-    if (count & 0x01)
-	buf[count-1] = inb(nic_base + PCNET_DATAPORT), xfer_count++;
+    if (count & 0x01) {
+	buf[count-1] = inb(nic_base + PCNET_DATAPORT);
+	xfer_count++;
+    }
 
     /* This was for the ALPHA version only, but enough people have been
        encountering problems that it is still here. */
-- 
2.26.0

[PATCH 17/29] fs_enet: Avoid comma separated statements

[Joe Perches]

Use semicolons and braces.

Signed-off-by: Joe Perches <joe@perches.com>
---
 drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c b/drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c
index bf846b42bc74..78e008b81374 100644
--- a/drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c
+++ b/drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c
@@ -562,10 +562,13 @@ fs_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
 			BD_ENET_TX_TC);
 		CBDS_SC(bdp, BD_ENET_TX_READY);
 
-		if ((CBDR_SC(bdp) & BD_ENET_TX_WRAP) == 0)
-			bdp++, curidx++;
-		else
-			bdp = fep->tx_bd_base, curidx = 0;
+		if ((CBDR_SC(bdp) & BD_ENET_TX_WRAP) == 0) {
+			bdp++;
+			curidx++;
+		} else {
+			bdp = fep->tx_bd_base;
+			curidx = 0;
+		}
 
 		len = skb_frag_size(frag);
 		CBDW_BUFADDR(bdp, skb_frag_dma_map(fep->dev, frag, 0, len,
-- 
2.26.0

[PATCH 18/29] wan: sbni: Avoid comma separated statements

[Joe Perches]

Use semicolons and braces.

Signed-off-by: Joe Perches <joe@perches.com>
---
 drivers/net/wan/sbni.c | 101 +++++++++++++++++++++++------------------
 1 file changed, 58 insertions(+), 43 deletions(-)

diff --git a/drivers/net/wan/sbni.c b/drivers/net/wan/sbni.c
index 40c04ea1200a..2fde439543fb 100644
--- a/drivers/net/wan/sbni.c
+++ b/drivers/net/wan/sbni.c
@@ -260,11 +260,12 @@ static int __init sbni_init(struct net_device *dev)
 		return  sbni_isa_probe( dev );
 	/* otherwise we have to perform search our adapter */
 
-	if( io[ num ] != -1 )
-		dev->base_addr	= io[ num ],
+	if( io[ num ] != -1 ) {
+		dev->base_addr	= io[ num ];
 		dev->irq	= irq[ num ];
-	else if( scandone  ||  io[ 0 ] != -1 )
+	} else if( scandone  ||  io[ 0 ] != -1 ) {
 		return  -ENODEV;
+	}
 
 	/* if io[ num ] contains non-zero address, then that is on ISA bus */
 	if( dev->base_addr )
@@ -399,12 +400,13 @@ sbni_probe1( struct net_device  *dev,  unsigned long  ioaddr,  int  irq )
 	nl->maxframe  = DEFAULT_FRAME_LEN;
 	nl->csr1.rate = baud[ num ];
 
-	if( (nl->cur_rxl_index = rxl[ num ]) == -1 )
+	if( (nl->cur_rxl_index = rxl[ num ]) == -1 ) {
 		/* autotune rxl */
-		nl->cur_rxl_index = DEF_RXL,
+		nl->cur_rxl_index = DEF_RXL;
 		nl->delta_rxl = DEF_RXL_DELTA;
-	else
+	} else {
 		nl->delta_rxl = 0;
+	}
 	nl->csr1.rxl  = rxl_tab[ nl->cur_rxl_index ];
 	if( inb( ioaddr + CSR0 ) & 0x01 )
 		nl->state |= FL_SLOW_MODE;
@@ -512,13 +514,15 @@ sbni_interrupt( int  irq,  void  *dev_id )
 
 	do {
 		repeat = 0;
-		if( inb( dev->base_addr + CSR0 ) & (RC_RDY | TR_RDY) )
-			handle_channel( dev ),
+		if( inb( dev->base_addr + CSR0 ) & (RC_RDY | TR_RDY) ) {
+			handle_channel( dev );
 			repeat = 1;
+		}
 		if( nl->second  && 	/* second channel present */
-		    (inb( nl->second->base_addr+CSR0 ) & (RC_RDY | TR_RDY)) )
-			handle_channel( nl->second ),
+		    (inb( nl->second->base_addr+CSR0 ) & (RC_RDY | TR_RDY)) ) {
+			handle_channel( nl->second );
 			repeat = 1;
+		}
 	} while( repeat );
 
 	if( nl->second )
@@ -610,11 +614,12 @@ recv_frame( struct net_device  *dev )
 		nl->state |= FL_PREV_OK;
 		if( framelen > 4 )
 			nl->in_stats.all_rx_number++;
-	} else
-		nl->state &= ~FL_PREV_OK,
-		change_level( dev ),
-		nl->in_stats.all_rx_number++,
+	} else {
+		nl->state &= ~FL_PREV_OK;
+		change_level( dev );
+		nl->in_stats.all_rx_number++;
 		nl->in_stats.bad_rx_number++;
+	}
 
 	return  !frame_ok  ||  framelen > 4;
 }
@@ -689,9 +694,10 @@ download_data( struct net_device  *dev,  u32  *crc_p )
 	*crc_p = calc_crc32( *crc_p, skb->data + nl->outpos, len );
 
 	/* if packet too short we should write some more bytes to pad */
-	for( len = nl->framelen - len;  len--; )
-		outb( 0, dev->base_addr + DAT ),
+	for( len = nl->framelen - len;  len--; ) {
+		outb( 0, dev->base_addr + DAT );
 		*crc_p = CRC32( 0, *crc_p );
+	}
 }
 
 
@@ -703,9 +709,10 @@ upload_data( struct net_device  *dev,  unsigned  framelen,  unsigned  frameno,
 
 	int  frame_ok;
 
-	if( is_first )
-		nl->wait_frameno = frameno,
+	if( is_first ) {
+		nl->wait_frameno = frameno;
 		nl->inppos = 0;
+	}
 
 	if( nl->wait_frameno == frameno ) {
 
@@ -717,33 +724,35 @@ upload_data( struct net_device  *dev,  unsigned  framelen,  unsigned  frameno,
 		 * error was occurred... drop entire packet
 		 */
 		else if( (frame_ok = skip_tail( dev->base_addr, framelen, crc ))
-			 != 0 )
-			nl->wait_frameno = 0,
-			nl->inppos = 0,
+			 != 0 ) {
+			nl->wait_frameno = 0;
+			nl->inppos = 0;
 #ifdef CONFIG_SBNI_MULTILINE
-			nl->master->stats.rx_errors++,
+			nl->master->stats.rx_errors++;
 			nl->master->stats.rx_missed_errors++;
 #else
-		        dev->stats.rx_errors++,
+		        dev->stats.rx_errors++;
 			dev->stats.rx_missed_errors++;
 #endif
+		}
 			/* now skip all frames until is_first != 0 */
 	} else
 		frame_ok = skip_tail( dev->base_addr, framelen, crc );
 
-	if( is_first  &&  !frame_ok )
+	if( is_first  &&  !frame_ok ) {
 		/*
 		 * Frame has been broken, but we had already stored
 		 * is_first... Drop entire packet.
 		 */
-		nl->wait_frameno = 0,
+		nl->wait_frameno = 0;
 #ifdef CONFIG_SBNI_MULTILINE
-		nl->master->stats.rx_errors++,
+		nl->master->stats.rx_errors++;
 		nl->master->stats.rx_crc_errors++;
 #else
-		dev->stats.rx_errors++,
+		dev->stats.rx_errors++;
 		dev->stats.rx_crc_errors++;
 #endif
+	}
 
 	return  frame_ok;
 }
@@ -782,17 +791,18 @@ interpret_ack( struct net_device  *dev,  unsigned  ack )
 		if( nl->state & FL_WAIT_ACK ) {
 			nl->outpos += nl->framelen;
 
-			if( --nl->tx_frameno )
+			if( --nl->tx_frameno ) {
 				nl->framelen = min_t(unsigned int,
 						   nl->maxframe,
 						   nl->tx_buf_p->len - nl->outpos);
-			else
-				send_complete( dev ),
+			} else {
+				send_complete( dev );
 #ifdef CONFIG_SBNI_MULTILINE
 				netif_wake_queue( nl->master );
 #else
 				netif_wake_queue( dev );
 #endif
+			}
 		}
 	}
 
@@ -872,16 +882,17 @@ drop_xmit_queue( struct net_device  *dev )
 {
 	struct net_local  *nl = netdev_priv(dev);
 
-	if( nl->tx_buf_p )
-		dev_kfree_skb_any( nl->tx_buf_p ),
-		nl->tx_buf_p = NULL,
+	if( nl->tx_buf_p ) {
+		dev_kfree_skb_any( nl->tx_buf_p );
+		nl->tx_buf_p = NULL;
 #ifdef CONFIG_SBNI_MULTILINE
-		nl->master->stats.tx_errors++,
+		nl->master->stats.tx_errors++;
 		nl->master->stats.tx_carrier_errors++;
 #else
-		dev->stats.tx_errors++,
+		dev->stats.tx_errors++;
 		dev->stats.tx_carrier_errors++;
 #endif
+	}
 
 	nl->tx_frameno	= 0;
 	nl->framelen	= 0;
@@ -1327,12 +1338,13 @@ sbni_ioctl( struct net_device  *dev,  struct ifreq  *ifr,  int  cmd )
 
 		spin_lock( &nl->lock );
 		flags = *(struct sbni_flags*) &ifr->ifr_ifru;
-		if( flags.fixed_rxl )
-			nl->delta_rxl = 0,
+		if( flags.fixed_rxl ) {
+			nl->delta_rxl = 0;
 			nl->cur_rxl_index = flags.rxl;
-		else
-			nl->delta_rxl = DEF_RXL_DELTA,
+		} else {
+			nl->delta_rxl = DEF_RXL_DELTA;
 			nl->cur_rxl_index = DEF_RXL;
+		}
 
 		nl->csr1.rxl = rxl_tab[ nl->cur_rxl_index ];
 		nl->csr1.rate = flags.rate;
@@ -1526,13 +1538,16 @@ sbni_setup( char  *p )
 		(*dest[ parm ])[ n ] = simple_strtol( p, &p, 0 );
 		if( !*p  ||  *p == ')' )
 			return 1;
-		if( *p == ';' )
-			++p, ++n, parm = 0;
-		else if( *p++ != ',' )
+		if( *p == ';' ) {
+			++p;
+			++n;
+			parm = 0;
+		} else if( *p++ != ',' ) {
 			break;
-		else
+		} else {
 			if( ++parm >= 5 )
 				break;
+		}
 	}
 bad_param:
 	pr_err("Error in sbni kernel parameter!\n");
-- 
2.26.0

[PATCH 27/29] ipv6: fib6: Avoid comma separated statements

[Joe Perches]

Use semicolons and braces.

Signed-off-by: Joe Perches <joe@perches.com>
---
 net/ipv6/ip6_fib.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/net/ipv6/ip6_fib.c b/net/ipv6/ip6_fib.c
index 25a90f3f705c..44d68ed70f24 100644
--- a/net/ipv6/ip6_fib.c
+++ b/net/ipv6/ip6_fib.c
@@ -1812,10 +1812,14 @@ static struct fib6_node *fib6_repair_tree(struct net *net,
 
 		children = 0;
 		child = NULL;
-		if (fn_r)
-			child = fn_r, children |= 1;
-		if (fn_l)
-			child = fn_l, children |= 2;
+		if (fn_r) {
+			child = fn_r;
+			children |= 1;
+		}
+		if (fn_l) {
+			child = fn_l;
+			children |= 2;
+		}
 
 		if (children == 3 || FIB6_SUBTREE(fn)
 #ifdef CONFIG_IPV6_SUBTREES
-- 
2.26.0

[PATCH 28/29] sunrpc: Avoid comma separated statements

[Joe Perches]

Use semicolons and braces.

Signed-off-by: Joe Perches <joe@perches.com>
---
 net/sunrpc/sysctl.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/net/sunrpc/sysctl.c b/net/sunrpc/sysctl.c
index 999eee1ed61c..6c86e2a7d942 100644
--- a/net/sunrpc/sysctl.c
+++ b/net/sunrpc/sysctl.c
@@ -108,8 +108,10 @@ proc_dodebug(struct ctl_table *table, int write, void *buffer, size_t *lenp,
 			left -= (s - tmpbuf);
 			if (left && !isspace(*s))
 				return -EINVAL;
-			while (left && isspace(*s))
-				left--, s++;
+			while (left && isspace(*s)) {
+				left--;
+				s++;
+			}
 		} else
 			left = 0;
 		*(unsigned int *) table->data = value;
-- 
2.26.0

Re: [PATCH 16/29] 8390: Avoid comma separated statements

[David Miller]

From: Joe Perches <joe@perches.com>
Date: Mon, 24 Aug 2020 21:56:13 -0700

> Use semicolons and braces.
> 
> Signed-off-by: Joe Perches <joe@perches.com>

Applied.

Re: [PATCH 17/29] fs_enet: Avoid comma separated statements

[David Miller]

From: Joe Perches <joe@perches.com>
Date: Mon, 24 Aug 2020 21:56:14 -0700

> Use semicolons and braces.
> 
> Signed-off-by: Joe Perches <joe@perches.com>

Applied.

Re: [PATCH 18/29] wan: sbni: Avoid comma separated statements

[David Miller]

From: Joe Perches <joe@perches.com>
Date: Mon, 24 Aug 2020 21:56:15 -0700

> Use semicolons and braces.
> 
> Signed-off-by: Joe Perches <joe@perches.com>

Applied.

Re: [PATCH 27/29] ipv6: fib6: Avoid comma separated statements

[David Miller]

From: Joe Perches <joe@perches.com>
Date: Mon, 24 Aug 2020 21:56:24 -0700

> Use semicolons and braces.
> 
> Signed-off-by: Joe Perches <joe@perches.com>

Applied.

Re: [PATCH 28/29] sunrpc: Avoid comma separated statements

[David Miller]

From: Joe Perches <joe@perches.com>
Date: Mon, 24 Aug 2020 21:56:25 -0700

> Use semicolons and braces.
> 
> Signed-off-by: Joe Perches <joe@perches.com>

Applied.

Re: [PATCH 00/29] treewide: Convert comma separated statements

[Martin K. Petersen]

On Mon, 24 Aug 2020 21:55:57 -0700, Joe Perches wrote:

> There are many comma separated statements in the kernel.
> See:https://lore.kernel.org/lkml/alpine.DEB.2.22.394.2008201856110.2524@hadrien/
> 
> Convert the comma separated statements that are in if/do/while blocks
> to use braces and semicolons.
> 
> Many comma separated statements still exist but those are changes for
> another day.
> 
> [...]

Applied to 5.10/scsi-queue, thanks!

[01/29] coding-style.rst: Avoid comma statements
        (no commit info)
[02/29] alpha: Avoid comma separated statements
        (no commit info)
[03/29] ia64: Avoid comma separated statements
        (no commit info)
[04/29] sparc: Avoid comma separated statements
        (no commit info)
[05/29] ata: Avoid comma separated statements
        (no commit info)
[06/29] drbd: Avoid comma separated statements
        (no commit info)
[07/29] lp: Avoid comma separated statements
        (no commit info)
[08/29] dma-buf: Avoid comma separated statements
        (no commit info)
[09/29] drm/gma500: Avoid comma separated statements
        (no commit info)
[10/29] drm/i915: Avoid comma separated statements
        (no commit info)
[11/29] hwmon: (scmi-hwmon): Avoid comma separated statements
        (no commit info)
[12/29] Input: MT - Avoid comma separated statements
        (no commit info)
[13/29] bcache: Avoid comma separated statements
        (no commit info)
[14/29] media: Avoid comma separated statements
        (no commit info)
[15/29] mtd: Avoid comma separated statements
        (no commit info)
[16/29] 8390: Avoid comma separated statements
        (no commit info)
[17/29] fs_enet: Avoid comma separated statements
        (no commit info)
[18/29] wan: sbni: Avoid comma separated statements
        (no commit info)
[19/29] s390/tty3270: Avoid comma separated statements
        (no commit info)
[20/29] scsi: arm: Avoid comma separated statements
        https://git.kernel.org/mkp/scsi/c/a08a07326510
[21/29] media: atomisp: Avoid comma separated statements
        (no commit info)
[22/29] video: fbdev: Avoid comma separated statements
        (no commit info)
[23/29] fuse: Avoid comma separated statements
        (no commit info)
[24/29] reiserfs: Avoid comma separated statements
        (no commit info)
[25/29] lib/zlib: Avoid comma separated statements
        (no commit info)
[26/29] lib: zstd: Avoid comma separated statements
        (no commit info)
[27/29] ipv6: fib6: Avoid comma separated statements
        (no commit info)
[28/29] sunrpc: Avoid comma separated statements
        (no commit info)
[29/29] tools: Avoid comma separated statements
        (no commit info)

-- 
Martin K. Petersen	Oracle Linux Engineering