[PATCH 12/38] Annotate hardware config module parameters in drivers/isdn/

[PATCH 12/38] Annotate hardware config module parameters in drivers/isdn/

[David Howells]

When the kernel is running in secure boot mode, we lock down the kernel to
prevent userspace from modifying the running kernel image.  Whilst this
includes prohibiting access to things like /dev/mem, it must also prevent
access by means of configuring driver modules in such a way as to cause a
device to access or modify the kernel image.

To this end, annotate module_param* statements that refer to hardware
configuration and indicate for future reference what type of parameter they
specify.  The parameter parser in the core sees this information and can
skip such parameters with an error message if the kernel is locked down.
The module initialisation then runs as normal, but just sees whatever the
default values for those parameters is.

Note that we do still need to do the module initialisation because some
drivers have viable defaults set in case parameters aren't specified and
some drivers support automatic configuration (e.g. PNP or PCI) in addition
to manually coded parameters.

This patch annotates drivers in drivers/isdn/.

Suggested-by: Alan Cox <gnomes@lxorguk.ukuu.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Karsten Keil <isdn@linux-pingi.de>
cc: netdev@vger.kernel.org
---

 drivers/isdn/hardware/avm/b1isa.c |    4 ++--
 drivers/isdn/hardware/avm/t1isa.c |    4 ++--
 drivers/isdn/hisax/config.c       |   10 +++++-----
 3 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/isdn/hardware/avm/b1isa.c b/drivers/isdn/hardware/avm/b1isa.c
index 31ef8130a87f..54e871a47387 100644
--- a/drivers/isdn/hardware/avm/b1isa.c
+++ b/drivers/isdn/hardware/avm/b1isa.c
@@ -169,8 +169,8 @@ static struct pci_dev isa_dev[MAX_CARDS];
 static int io[MAX_CARDS];
 static int irq[MAX_CARDS];
 
-module_param_array(io, int, NULL, 0);
-module_param_array(irq, int, NULL, 0);
+module_param_hw_array(io, int, ioport, NULL, 0);
+module_param_hw_array(irq, int, irq, NULL, 0);
 MODULE_PARM_DESC(io, "I/O base address(es)");
 MODULE_PARM_DESC(irq, "IRQ number(s) (assigned)");
 
diff --git a/drivers/isdn/hardware/avm/t1isa.c b/drivers/isdn/hardware/avm/t1isa.c
index 72ef18853951..9516203c735f 100644
--- a/drivers/isdn/hardware/avm/t1isa.c
+++ b/drivers/isdn/hardware/avm/t1isa.c
@@ -516,8 +516,8 @@ static int io[MAX_CARDS];
 static int irq[MAX_CARDS];
 static int cardnr[MAX_CARDS];
 
-module_param_array(io, int, NULL, 0);
-module_param_array(irq, int, NULL, 0);
+module_param_hw_array(io, int, ioport, NULL, 0);
+module_param_hw_array(irq, int, irq, NULL, 0);
 module_param_array(cardnr, int, NULL, 0);
 MODULE_PARM_DESC(io, "I/O base address(es)");
 MODULE_PARM_DESC(irq, "IRQ number(s) (assigned)");
diff --git a/drivers/isdn/hisax/config.c b/drivers/isdn/hisax/config.c
index 2d12c6ceeb89..c7d68675b028 100644
--- a/drivers/isdn/hisax/config.c
+++ b/drivers/isdn/hisax/config.c
@@ -350,13 +350,13 @@ MODULE_AUTHOR("Karsten Keil");
 MODULE_LICENSE("GPL");
 module_param_array(type, int, NULL, 0);
 module_param_array(protocol, int, NULL, 0);
-module_param_array(io, int, NULL, 0);
-module_param_array(irq, int, NULL, 0);
-module_param_array(mem, int, NULL, 0);
+module_param_hw_array(io, int, ioport, NULL, 0);
+module_param_hw_array(irq, int, irq, NULL, 0);
+module_param_hw_array(mem, int, iomem, NULL, 0);
 module_param(id, charp, 0);
 #ifdef IO0_IO1
-module_param_array(io0, int, NULL, 0);
-module_param_array(io1, int, NULL, 0);
+module_param_hw_array(io0, int, ioport, NULL, 0);
+module_param_hw_array(io1, int, ioport, NULL, 0);
 #endif
 #endif /* MODULE */
 

[PATCH 16/38] Annotate hardware config module parameters in drivers/net/appletalk/

[David Howells]

When the kernel is running in secure boot mode, we lock down the kernel to
prevent userspace from modifying the running kernel image.  Whilst this
includes prohibiting access to things like /dev/mem, it must also prevent
access by means of configuring driver modules in such a way as to cause a
device to access or modify the kernel image.

To this end, annotate module_param* statements that refer to hardware
configuration and indicate for future reference what type of parameter they
specify.  The parameter parser in the core sees this information and can
skip such parameters with an error message if the kernel is locked down.
The module initialisation then runs as normal, but just sees whatever the
default values for those parameters is.

Note that we do still need to do the module initialisation because some
drivers have viable defaults set in case parameters aren't specified and
some drivers support automatic configuration (e.g. PNP or PCI) in addition
to manually coded parameters.

This patch annotates drivers in drivers/net/appletalk/.

Suggested-by: Alan Cox <gnomes@lxorguk.ukuu.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
cc: netdev@vger.kernel.org
---

 drivers/net/appletalk/cops.c |    6 +++---
 drivers/net/appletalk/ltpc.c |    6 +++---
 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/net/appletalk/cops.c b/drivers/net/appletalk/cops.c
index 1b2e9217ec78..486e1e6997fc 100644
--- a/drivers/net/appletalk/cops.c
+++ b/drivers/net/appletalk/cops.c
@@ -986,9 +986,9 @@ static int cops_close(struct net_device *dev)
 static struct net_device *cops_dev;
 
 MODULE_LICENSE("GPL");
-module_param(io, int, 0);
-module_param(irq, int, 0);
-module_param(board_type, int, 0);
+module_param_hw(io, int, ioport, 0);
+module_param_hw(irq, int, irq, 0);
+module_param_hw(board_type, int, other, 0);
 
 static int __init cops_module_init(void)
 {
diff --git a/drivers/net/appletalk/ltpc.c b/drivers/net/appletalk/ltpc.c
index 01e2ac55c137..ac755d2950a6 100644
--- a/drivers/net/appletalk/ltpc.c
+++ b/drivers/net/appletalk/ltpc.c
@@ -1231,9 +1231,9 @@ static struct net_device *dev_ltpc;
 
 MODULE_LICENSE("GPL");
 module_param(debug, int, 0);
-module_param(io, int, 0);
-module_param(irq, int, 0);
-module_param(dma, int, 0);
+module_param_hw(io, int, ioport, 0);
+module_param_hw(irq, int, irq, 0);
+module_param_hw(dma, int, dma, 0);
 
 
 static int __init ltpc_module_init(void)

[PATCH 17/38] Annotate hardware config module parameters in drivers/net/arcnet/

[David Howells]

When the kernel is running in secure boot mode, we lock down the kernel to
prevent userspace from modifying the running kernel image.  Whilst this
includes prohibiting access to things like /dev/mem, it must also prevent
access by means of configuring driver modules in such a way as to cause a
device to access or modify the kernel image.

To this end, annotate module_param* statements that refer to hardware
configuration and indicate for future reference what type of parameter they
specify.  The parameter parser in the core sees this information and can
skip such parameters with an error message if the kernel is locked down.
The module initialisation then runs as normal, but just sees whatever the
default values for those parameters is.

Note that we do still need to do the module initialisation because some
drivers have viable defaults set in case parameters aren't specified and
some drivers support automatic configuration (e.g. PNP or PCI) in addition
to manually coded parameters.

This patch annotates drivers in drivers/net/arcnet/.

Suggested-by: Alan Cox <gnomes@lxorguk.ukuu.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Michael Grzeschik <m.grzeschik@pengutronix.de>
cc: netdev@vger.kernel.org
---

 drivers/net/arcnet/com20020-isa.c |    4 ++--
 drivers/net/arcnet/com90io.c      |    4 ++--
 drivers/net/arcnet/com90xx.c      |    4 ++--
 3 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/net/arcnet/com20020-isa.c b/drivers/net/arcnet/com20020-isa.c
index b9e9931353b2..38fa60ddaf2e 100644
--- a/drivers/net/arcnet/com20020-isa.c
+++ b/drivers/net/arcnet/com20020-isa.c
@@ -129,8 +129,8 @@ static int clockp = 0;
 static int clockm = 0;
 
 module_param(node, int, 0);
-module_param(io, int, 0);
-module_param(irq, int, 0);
+module_param_hw(io, int, ioport, 0);
+module_param_hw(irq, int, irq, 0);
 module_param_string(device, device, sizeof(device), 0);
 module_param(timeout, int, 0);
 module_param(backplane, int, 0);
diff --git a/drivers/net/arcnet/com90io.c b/drivers/net/arcnet/com90io.c
index b57863df5bf5..4e56aaf2b984 100644
--- a/drivers/net/arcnet/com90io.c
+++ b/drivers/net/arcnet/com90io.c
@@ -347,8 +347,8 @@ static int io;			/* use the insmod io= irq= shmem= options */
 static int irq;
 static char device[9];		/* use eg. device=arc1 to change name */
 
-module_param(io, int, 0);
-module_param(irq, int, 0);
+module_param_hw(io, int, ioport, 0);
+module_param_hw(irq, int, irq, 0);
 module_param_string(device, device, sizeof(device), 0);
 MODULE_LICENSE("GPL");
 
diff --git a/drivers/net/arcnet/com90xx.c b/drivers/net/arcnet/com90xx.c
index 81f90c4703ae..ca4a57c30bf8 100644
--- a/drivers/net/arcnet/com90xx.c
+++ b/drivers/net/arcnet/com90xx.c
@@ -88,8 +88,8 @@ static int irq;
 static int shmem;
 static char device[9];		/* use eg. device=arc1 to change name */
 
-module_param(io, int, 0);
-module_param(irq, int, 0);
+module_param_hw(io, int, ioport, 0);
+module_param_hw(irq, int, irq, 0);
 module_param(shmem, int, 0);
 module_param_string(device, device, sizeof(device), 0);
 

[PATCH 18/38] Annotate hardware config module parameters in drivers/net/can/

[David Howells]

When the kernel is running in secure boot mode, we lock down the kernel to
prevent userspace from modifying the running kernel image.  Whilst this
includes prohibiting access to things like /dev/mem, it must also prevent
access by means of configuring driver modules in such a way as to cause a
device to access or modify the kernel image.

To this end, annotate module_param* statements that refer to hardware
configuration and indicate for future reference what type of parameter they
specify.  The parameter parser in the core sees this information and can
skip such parameters with an error message if the kernel is locked down.
The module initialisation then runs as normal, but just sees whatever the
default values for those parameters is.

Note that we do still need to do the module initialisation because some
drivers have viable defaults set in case parameters aren't specified and
some drivers support automatic configuration (e.g. PNP or PCI) in addition
to manually coded parameters.

This patch annotates drivers in drivers/net/can/.

Suggested-by: Alan Cox <gnomes@lxorguk.ukuu.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
cc: Wolfgang Grandegger <wg@grandegger.com>
cc: linux-can@vger.kernel.org
cc: netdev@vger.kernel.org
---

 drivers/net/can/cc770/cc770_isa.c     |    8 ++++----
 drivers/net/can/sja1000/sja1000_isa.c |    8 ++++----
 2 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/net/can/cc770/cc770_isa.c b/drivers/net/can/cc770/cc770_isa.c
index e0d15711e9ac..3a30fd3b4498 100644
--- a/drivers/net/can/cc770/cc770_isa.c
+++ b/drivers/net/can/cc770/cc770_isa.c
@@ -82,16 +82,16 @@ static u8 cor[MAXDEV] = {[0 ... (MAXDEV - 1)] = 0xff};
 static u8 bcr[MAXDEV] = {[0 ... (MAXDEV - 1)] = 0xff};
 static int indirect[MAXDEV] = {[0 ... (MAXDEV - 1)] = -1};
 
-module_param_array(port, ulong, NULL, S_IRUGO);
+module_param_hw_array(port, ulong, ioport, NULL, S_IRUGO);
 MODULE_PARM_DESC(port, "I/O port number");
 
-module_param_array(mem, ulong, NULL, S_IRUGO);
+module_param_hw_array(mem, ulong, iomem, NULL, S_IRUGO);
 MODULE_PARM_DESC(mem, "I/O memory address");
 
-module_param_array(indirect, int, NULL, S_IRUGO);
+module_param_hw_array(indirect, int, ioport, NULL, S_IRUGO);
 MODULE_PARM_DESC(indirect, "Indirect access via address and data port");
 
-module_param_array(irq, int, NULL, S_IRUGO);
+module_param_hw_array(irq, int, irq, NULL, S_IRUGO);
 MODULE_PARM_DESC(irq, "IRQ number");
 
 module_param_array(clk, int, NULL, S_IRUGO);
diff --git a/drivers/net/can/sja1000/sja1000_isa.c b/drivers/net/can/sja1000/sja1000_isa.c
index e97e6d35b300..a89c1e92554d 100644
--- a/drivers/net/can/sja1000/sja1000_isa.c
+++ b/drivers/net/can/sja1000/sja1000_isa.c
@@ -48,16 +48,16 @@ static unsigned char ocr[MAXDEV] = {[0 ... (MAXDEV - 1)] = 0xff};
 static int indirect[MAXDEV] = {[0 ... (MAXDEV - 1)] = -1};
 static spinlock_t indirect_lock[MAXDEV];  /* lock for indirect access mode */
 
-module_param_array(port, ulong, NULL, S_IRUGO);
+module_param_hw_array(port, ulong, ioport, NULL, S_IRUGO);
 MODULE_PARM_DESC(port, "I/O port number");
 
-module_param_array(mem, ulong, NULL, S_IRUGO);
+module_param_hw_array(mem, ulong, iomem, NULL, S_IRUGO);
 MODULE_PARM_DESC(mem, "I/O memory address");
 
-module_param_array(indirect, int, NULL, S_IRUGO);
+module_param_hw_array(indirect, int, ioport, NULL, S_IRUGO);
 MODULE_PARM_DESC(indirect, "Indirect access via address and data port");
 
-module_param_array(irq, int, NULL, S_IRUGO);
+module_param_hw_array(irq, int, irq, NULL, S_IRUGO);
 MODULE_PARM_DESC(irq, "IRQ number");
 
 module_param_array(clk, int, NULL, S_IRUGO);

[PATCH 19/38] Annotate hardware config module parameters in drivers/net/ethernet/

[David Howells]

When the kernel is running in secure boot mode, we lock down the kernel to
prevent userspace from modifying the running kernel image.  Whilst this
includes prohibiting access to things like /dev/mem, it must also prevent
access by means of configuring driver modules in such a way as to cause a
device to access or modify the kernel image.

To this end, annotate module_param* statements that refer to hardware
configuration and indicate for future reference what type of parameter they
specify.  The parameter parser in the core sees this information and can
skip such parameters with an error message if the kernel is locked down.
The module initialisation then runs as normal, but just sees whatever the
default values for those parameters is.

Note that we do still need to do the module initialisation because some
drivers have viable defaults set in case parameters aren't specified and
some drivers support automatic configuration (e.g. PNP or PCI) in addition
to manually coded parameters.

This patch annotates drivers in drivers/net/ethernet/.

Suggested-by: Alan Cox <gnomes@lxorguk.ukuu.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steffen Klassert <klassert@mathematik.tu-chemnitz.de>
cc: Jaroslav Kysela <perex@perex.cz>
cc: netdev@vger.kernel.org
cc: linux-parisc@vger.kernel.org
---

 drivers/net/ethernet/3com/3c509.c      |    2 +-
 drivers/net/ethernet/3com/3c59x.c      |    4 ++--
 drivers/net/ethernet/8390/ne.c         |    4 ++--
 drivers/net/ethernet/8390/smc-ultra.c  |    4 ++--
 drivers/net/ethernet/8390/wd.c         |    8 ++++----
 drivers/net/ethernet/amd/lance.c       |    6 +++---
 drivers/net/ethernet/amd/ni65.c        |    6 +++---
 drivers/net/ethernet/cirrus/cs89x0.c   |    6 +++---
 drivers/net/ethernet/dec/tulip/de4x5.c |    2 +-
 drivers/net/ethernet/hp/hp100.c        |    2 +-
 drivers/net/ethernet/realtek/atp.c     |    4 ++--
 drivers/net/ethernet/smsc/smc9194.c    |    4 ++--
 12 files changed, 26 insertions(+), 26 deletions(-)

diff --git a/drivers/net/ethernet/3com/3c509.c b/drivers/net/ethernet/3com/3c509.c
index c7f9f2c77da7..db8592d412ab 100644
--- a/drivers/net/ethernet/3com/3c509.c
+++ b/drivers/net/ethernet/3com/3c509.c
@@ -1371,7 +1371,7 @@ el3_resume(struct device *pdev)
 #endif /* CONFIG_PM */
 
 module_param(debug,int, 0);
-module_param_array(irq, int, NULL, 0);
+module_param_hw_array(irq, int, irq, NULL, 0);
 module_param(max_interrupt_work, int, 0);
 MODULE_PARM_DESC(debug, "debug level (0-6)");
 MODULE_PARM_DESC(irq, "IRQ number(s) (assigned)");
diff --git a/drivers/net/ethernet/3com/3c59x.c b/drivers/net/ethernet/3com/3c59x.c
index 40196f41768a..e41245a54f8b 100644
--- a/drivers/net/ethernet/3com/3c59x.c
+++ b/drivers/net/ethernet/3com/3c59x.c
@@ -813,8 +813,8 @@ module_param(global_enable_wol, int, 0);
 module_param_array(enable_wol, int, NULL, 0);
 module_param(rx_copybreak, int, 0);
 module_param(max_interrupt_work, int, 0);
-module_param(compaq_ioaddr, int, 0);
-module_param(compaq_irq, int, 0);
+module_param_hw(compaq_ioaddr, int, ioport, 0);
+module_param_hw(compaq_irq, int, irq, 0);
 module_param(compaq_device_id, int, 0);
 module_param(watchdog, int, 0);
 module_param(global_use_mmio, int, 0);
diff --git a/drivers/net/ethernet/8390/ne.c b/drivers/net/ethernet/8390/ne.c
index c063b410a163..66f47987e2a2 100644
--- a/drivers/net/ethernet/8390/ne.c
+++ b/drivers/net/ethernet/8390/ne.c
@@ -74,8 +74,8 @@ static int bad[MAX_NE_CARDS];
 static u32 ne_msg_enable;
 
 #ifdef MODULE
-module_param_array(io, int, NULL, 0);
-module_param_array(irq, int, NULL, 0);
+module_param_hw_array(io, int, ioport, NULL, 0);
+module_param_hw_array(irq, int, irq, NULL, 0);
 module_param_array(bad, int, NULL, 0);
 module_param_named(msg_enable, ne_msg_enable, uint, (S_IRUSR|S_IRGRP|S_IROTH));
 MODULE_PARM_DESC(io, "I/O base address(es),required");
diff --git a/drivers/net/ethernet/8390/smc-ultra.c b/drivers/net/ethernet/8390/smc-ultra.c
index 364b6514f65f..4e02f6a23575 100644
--- a/drivers/net/ethernet/8390/smc-ultra.c
+++ b/drivers/net/ethernet/8390/smc-ultra.c
@@ -561,8 +561,8 @@ static struct net_device *dev_ultra[MAX_ULTRA_CARDS];
 static int io[MAX_ULTRA_CARDS];
 static int irq[MAX_ULTRA_CARDS];
 
-module_param_array(io, int, NULL, 0);
-module_param_array(irq, int, NULL, 0);
+module_param_hw_array(io, int, ioport, NULL, 0);
+module_param_hw_array(irq, int, irq, NULL, 0);
 module_param_named(msg_enable, ultra_msg_enable, uint, (S_IRUSR|S_IRGRP|S_IROTH));
 MODULE_PARM_DESC(io, "I/O base address(es)");
 MODULE_PARM_DESC(irq, "IRQ number(s) (assigned)");
diff --git a/drivers/net/ethernet/8390/wd.c b/drivers/net/ethernet/8390/wd.c
index ad019cbc698f..6efa2722f850 100644
--- a/drivers/net/ethernet/8390/wd.c
+++ b/drivers/net/ethernet/8390/wd.c
@@ -503,10 +503,10 @@ static int irq[MAX_WD_CARDS];
 static int mem[MAX_WD_CARDS];
 static int mem_end[MAX_WD_CARDS];	/* for non std. mem size */
 
-module_param_array(io, int, NULL, 0);
-module_param_array(irq, int, NULL, 0);
-module_param_array(mem, int, NULL, 0);
-module_param_array(mem_end, int, NULL, 0);
+module_param_hw_array(io, int, ioport, NULL, 0);
+module_param_hw_array(irq, int, irq, NULL, 0);
+module_param_hw_array(mem, int, iomem, NULL, 0);
+module_param_hw_array(mem_end, int, iomem, NULL, 0);
 module_param_named(msg_enable, wd_msg_enable, uint, (S_IRUSR|S_IRGRP|S_IROTH));
 MODULE_PARM_DESC(io, "I/O base address(es)");
 MODULE_PARM_DESC(irq, "IRQ number(s) (ignored for PureData boards)");
diff --git a/drivers/net/ethernet/amd/lance.c b/drivers/net/ethernet/amd/lance.c
index 61a641f23149..12a6a93d221b 100644
--- a/drivers/net/ethernet/amd/lance.c
+++ b/drivers/net/ethernet/amd/lance.c
@@ -318,9 +318,9 @@ static int io[MAX_CARDS];
 static int dma[MAX_CARDS];
 static int irq[MAX_CARDS];
 
-module_param_array(io, int, NULL, 0);
-module_param_array(dma, int, NULL, 0);
-module_param_array(irq, int, NULL, 0);
+module_param_hw_array(io, int, ioport, NULL, 0);
+module_param_hw_array(dma, int, dma, NULL, 0);
+module_param_hw_array(irq, int, irq, NULL, 0);
 module_param(lance_debug, int, 0);
 MODULE_PARM_DESC(io, "LANCE/PCnet I/O base address(es),required");
 MODULE_PARM_DESC(dma, "LANCE/PCnet ISA DMA channel (ignored for some devices)");
diff --git a/drivers/net/ethernet/amd/ni65.c b/drivers/net/ethernet/amd/ni65.c
index 5985bf220a8d..e248d1ab3e47 100644
--- a/drivers/net/ethernet/amd/ni65.c
+++ b/drivers/net/ethernet/amd/ni65.c
@@ -1227,9 +1227,9 @@ static void set_multicast_list(struct net_device *dev)
 #ifdef MODULE
 static struct net_device *dev_ni65;
 
-module_param(irq, int, 0);
-module_param(io, int, 0);
-module_param(dma, int, 0);
+module_param_hw(irq, int, irq, 0);
+module_param_hw(io, int, ioport, 0);
+module_param_hw(dma, int, dma, 0);
 MODULE_PARM_DESC(irq, "ni6510 IRQ number (ignored for some cards)");
 MODULE_PARM_DESC(io, "ni6510 I/O base address");
 MODULE_PARM_DESC(dma, "ni6510 ISA DMA channel (ignored for some cards)");
diff --git a/drivers/net/ethernet/cirrus/cs89x0.c b/drivers/net/ethernet/cirrus/cs89x0.c
index 3647b28e8de0..8f660d9761cc 100644
--- a/drivers/net/ethernet/cirrus/cs89x0.c
+++ b/drivers/net/ethernet/cirrus/cs89x0.c
@@ -1704,12 +1704,12 @@ static int use_dma;			/* These generate unused var warnings if ALLOW_DMA = 0 */
 static int dma;
 static int dmasize = 16;		/* or 64 */
 
-module_param(io, int, 0);
-module_param(irq, int, 0);
+module_param_hw(io, int, ioport, 0);
+module_param_hw(irq, int, irq, 0);
 module_param(debug, int, 0);
 module_param_string(media, media, sizeof(media), 0);
 module_param(duplex, int, 0);
-module_param(dma , int, 0);
+module_param_hw(dma , int, dma, 0);
 module_param(dmasize , int, 0);
 module_param(use_dma , int, 0);
 MODULE_PARM_DESC(io, "cs89x0 I/O base address");
diff --git a/drivers/net/ethernet/dec/tulip/de4x5.c b/drivers/net/ethernet/dec/tulip/de4x5.c
index df4a871df633..fd6bcf024729 100644
--- a/drivers/net/ethernet/dec/tulip/de4x5.c
+++ b/drivers/net/ethernet/dec/tulip/de4x5.c
@@ -1015,7 +1015,7 @@ static int     compact_infoblock(struct net_device *dev, u_char count, u_char *p
 
 static int io=0x0;/* EDIT THIS LINE FOR YOUR CONFIGURATION IF NEEDED        */
 
-module_param(io, int, 0);
+module_param_hw(io, int, ioport, 0);
 module_param(de4x5_debug, int, 0);
 module_param(dec_only, int, 0);
 module_param(args, charp, 0);
diff --git a/drivers/net/ethernet/hp/hp100.c b/drivers/net/ethernet/hp/hp100.c
index 1a31bee6e728..5673b071e39d 100644
--- a/drivers/net/ethernet/hp/hp100.c
+++ b/drivers/net/ethernet/hp/hp100.c
@@ -2966,7 +2966,7 @@ MODULE_DESCRIPTION("HP CASCADE Architecture Driver for 100VG-AnyLan Network Adap
 #define HP100_DEVICES 5
 /* Parameters set by insmod */
 static int hp100_port[HP100_DEVICES] = { 0, [1 ... (HP100_DEVICES-1)] = -1 };
-module_param_array(hp100_port, int, NULL, 0);
+module_param_hw_array(hp100_port, int, ioport, NULL, 0);
 
 /* List of devices */
 static struct net_device *hp100_devlist[HP100_DEVICES];
diff --git a/drivers/net/ethernet/realtek/atp.c b/drivers/net/ethernet/realtek/atp.c
index 9bcd4aefc9c5..bed34684994f 100644
--- a/drivers/net/ethernet/realtek/atp.c
+++ b/drivers/net/ethernet/realtek/atp.c
@@ -151,8 +151,8 @@ MODULE_LICENSE("GPL");
 
 module_param(max_interrupt_work, int, 0);
 module_param(debug, int, 0);
-module_param_array(io, int, NULL, 0);
-module_param_array(irq, int, NULL, 0);
+module_param_hw_array(io, int, ioport, NULL, 0);
+module_param_hw_array(irq, int, irq, NULL, 0);
 module_param_array(xcvr, int, NULL, 0);
 MODULE_PARM_DESC(max_interrupt_work, "ATP maximum events handled per interrupt");
 MODULE_PARM_DESC(debug, "ATP debug level (0-7)");
diff --git a/drivers/net/ethernet/smsc/smc9194.c b/drivers/net/ethernet/smsc/smc9194.c
index c8d84679ede7..d3bb2ba51f40 100644
--- a/drivers/net/ethernet/smsc/smc9194.c
+++ b/drivers/net/ethernet/smsc/smc9194.c
@@ -1501,8 +1501,8 @@ static void smc_set_multicast_list(struct net_device *dev)
 static struct net_device *devSMC9194;
 MODULE_LICENSE("GPL");
 
-module_param(io, int, 0);
-module_param(irq, int, 0);
+module_param_hw(io, int, ioport, 0);
+module_param_hw(irq, int, irq, 0);
 module_param(ifport, int, 0);
 MODULE_PARM_DESC(io, "SMC 99194 I/O base address");
 MODULE_PARM_DESC(irq, "SMC 99194 IRQ number");

[PATCH 20/38] Annotate hardware config module parameters in drivers/net/hamradio/

[David Howells]

When the kernel is running in secure boot mode, we lock down the kernel to
prevent userspace from modifying the running kernel image.  Whilst this
includes prohibiting access to things like /dev/mem, it must also prevent
access by means of configuring driver modules in such a way as to cause a
device to access or modify the kernel image.

To this end, annotate module_param* statements that refer to hardware
configuration and indicate for future reference what type of parameter they
specify.  The parameter parser in the core sees this information and can
skip such parameters with an error message if the kernel is locked down.
The module initialisation then runs as normal, but just sees whatever the
default values for those parameters is.

Note that we do still need to do the module initialisation because some
drivers have viable defaults set in case parameters aren't specified and
some drivers support automatic configuration (e.g. PNP or PCI) in addition
to manually coded parameters.

This patch annotates drivers in drivers/net/hamradio/.

Suggested-by: Alan Cox <gnomes@lxorguk.ukuu.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Thomas Sailer <t.sailer@alumni.ethz.ch>
cc: Joerg Reuter <jreuter@yaina.de>
cc: linux-hams@vger.kernel.org
cc: netdev@vger.kernel.org
---

 drivers/net/hamradio/baycom_epp.c     |    2 +-
 drivers/net/hamradio/baycom_par.c     |    2 +-
 drivers/net/hamradio/baycom_ser_fdx.c |    4 ++--
 drivers/net/hamradio/baycom_ser_hdx.c |    4 ++--
 drivers/net/hamradio/dmascc.c         |    2 +-
 5 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/net/hamradio/baycom_epp.c b/drivers/net/hamradio/baycom_epp.c
index 594fa1407e29..1503f10122f7 100644
--- a/drivers/net/hamradio/baycom_epp.c
+++ b/drivers/net/hamradio/baycom_epp.c
@@ -1176,7 +1176,7 @@ static int iobase[NR_PORTS] = { 0x378, };
 
 module_param_array(mode, charp, NULL, 0);
 MODULE_PARM_DESC(mode, "baycom operating mode");
-module_param_array(iobase, int, NULL, 0);
+module_param_hw_array(iobase, int, ioport, NULL, 0);
 MODULE_PARM_DESC(iobase, "baycom io base address");
 
 MODULE_AUTHOR("Thomas M. Sailer, sailer@ife.ee.ethz.ch, hb9jnx@hb9w.che.eu");
diff --git a/drivers/net/hamradio/baycom_par.c b/drivers/net/hamradio/baycom_par.c
index 809dc25909d1..92b13b39f426 100644
--- a/drivers/net/hamradio/baycom_par.c
+++ b/drivers/net/hamradio/baycom_par.c
@@ -481,7 +481,7 @@ static int iobase[NR_PORTS] = { 0x378, };
 
 module_param_array(mode, charp, NULL, 0);
 MODULE_PARM_DESC(mode, "baycom operating mode; eg. par96 or picpar");
-module_param_array(iobase, int, NULL, 0);
+module_param_hw_array(iobase, int, ioport, NULL, 0);
 MODULE_PARM_DESC(iobase, "baycom io base address");
 
 MODULE_AUTHOR("Thomas M. Sailer, sailer@ife.ee.ethz.ch, hb9jnx@hb9w.che.eu");
diff --git a/drivers/net/hamradio/baycom_ser_fdx.c b/drivers/net/hamradio/baycom_ser_fdx.c
index ebc06822fd4d..d9a646acca20 100644
--- a/drivers/net/hamradio/baycom_ser_fdx.c
+++ b/drivers/net/hamradio/baycom_ser_fdx.c
@@ -614,9 +614,9 @@ static int baud[NR_PORTS] = { [0 ... NR_PORTS-1] = 1200 };
 
 module_param_array(mode, charp, NULL, 0);
 MODULE_PARM_DESC(mode, "baycom operating mode; * for software DCD");
-module_param_array(iobase, int, NULL, 0);
+module_param_hw_array(iobase, int, ioport, NULL, 0);
 MODULE_PARM_DESC(iobase, "baycom io base address");
-module_param_array(irq, int, NULL, 0);
+module_param_hw_array(irq, int, irq, NULL, 0);
 MODULE_PARM_DESC(irq, "baycom irq number");
 module_param_array(baud, int, NULL, 0);
 MODULE_PARM_DESC(baud, "baycom baud rate (300 to 4800)");
diff --git a/drivers/net/hamradio/baycom_ser_hdx.c b/drivers/net/hamradio/baycom_ser_hdx.c
index 60fcf512c208..f1c8a9ff3891 100644
--- a/drivers/net/hamradio/baycom_ser_hdx.c
+++ b/drivers/net/hamradio/baycom_ser_hdx.c
@@ -642,9 +642,9 @@ static int irq[NR_PORTS] = { 4, };
 
 module_param_array(mode, charp, NULL, 0);
 MODULE_PARM_DESC(mode, "baycom operating mode; * for software DCD");
-module_param_array(iobase, int, NULL, 0);
+module_param_hw_array(iobase, int, ioport, NULL, 0);
 MODULE_PARM_DESC(iobase, "baycom io base address");
-module_param_array(irq, int, NULL, 0);
+module_param_hw_array(irq, int, irq, NULL, 0);
 MODULE_PARM_DESC(irq, "baycom irq number");
 
 MODULE_AUTHOR("Thomas M. Sailer, sailer@ife.ee.ethz.ch, hb9jnx@hb9w.che.eu");
diff --git a/drivers/net/hamradio/dmascc.c b/drivers/net/hamradio/dmascc.c
index 2479072981a1..dec6b76bc0fb 100644
--- a/drivers/net/hamradio/dmascc.c
+++ b/drivers/net/hamradio/dmascc.c
@@ -274,7 +274,7 @@ static unsigned long rand;
 
 MODULE_AUTHOR("Klaus Kudielka");
 MODULE_DESCRIPTION("Driver for high-speed SCC boards");
-module_param_array(io, int, NULL, 0);
+module_param_hw_array(io, int, ioport, NULL, 0);
 MODULE_LICENSE("GPL");
 
 static void __exit dmascc_exit(void)

[PATCH 21/38] Annotate hardware config module parameters in drivers/net/irda/

[David Howells]

When the kernel is running in secure boot mode, we lock down the kernel to
prevent userspace from modifying the running kernel image.  Whilst this
includes prohibiting access to things like /dev/mem, it must also prevent
access by means of configuring driver modules in such a way as to cause a
device to access or modify the kernel image.

To this end, annotate module_param* statements that refer to hardware
configuration and indicate for future reference what type of parameter they
specify.  The parameter parser in the core sees this information and can
skip such parameters with an error message if the kernel is locked down.
The module initialisation then runs as normal, but just sees whatever the
default values for those parameters is.

Note that we do still need to do the module initialisation because some
drivers have viable defaults set in case parameters aren't specified and
some drivers support automatic configuration (e.g. PNP or PCI) in addition
to manually coded parameters.

This patch annotates drivers in drivers/net/irda/.

Suggested-by: Alan Cox <gnomes@lxorguk.ukuu.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Samuel Ortiz <samuel@sortiz.org>
cc: netdev@vger.kernel.org
---

 drivers/net/irda/ali-ircc.c    |    6 +++---
 drivers/net/irda/nsc-ircc.c    |    6 +++---
 drivers/net/irda/smsc-ircc2.c  |   10 +++++-----
 drivers/net/irda/w83977af_ir.c |    4 ++--
 4 files changed, 13 insertions(+), 13 deletions(-)

diff --git a/drivers/net/irda/ali-ircc.c b/drivers/net/irda/ali-ircc.c
index c285eafd3f1c..35f198d83701 100644
--- a/drivers/net/irda/ali-ircc.c
+++ b/drivers/net/irda/ali-ircc.c
@@ -2207,11 +2207,11 @@ MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:" ALI_IRCC_DRIVER_NAME);
 
 
-module_param_array(io, int, NULL, 0);
+module_param_hw_array(io, int, ioport, NULL, 0);
 MODULE_PARM_DESC(io, "Base I/O addresses");
-module_param_array(irq, int, NULL, 0);
+module_param_hw_array(irq, int, irq, NULL, 0);
 MODULE_PARM_DESC(irq, "IRQ lines");
-module_param_array(dma, int, NULL, 0);
+module_param_hw_array(dma, int, dma, NULL, 0);
 MODULE_PARM_DESC(dma, "DMA channels");
 
 module_init(ali_ircc_init);
diff --git a/drivers/net/irda/nsc-ircc.c b/drivers/net/irda/nsc-ircc.c
index aaecc3baaf30..7beae147be11 100644
--- a/drivers/net/irda/nsc-ircc.c
+++ b/drivers/net/irda/nsc-ircc.c
@@ -2396,11 +2396,11 @@ MODULE_LICENSE("GPL");
 
 module_param(qos_mtt_bits, int, 0);
 MODULE_PARM_DESC(qos_mtt_bits, "Minimum Turn Time");
-module_param_array(io, int, NULL, 0);
+module_param_hw_array(io, int, ioport, NULL, 0);
 MODULE_PARM_DESC(io, "Base I/O addresses");
-module_param_array(irq, int, NULL, 0);
+module_param_hw_array(irq, int, irq, NULL, 0);
 MODULE_PARM_DESC(irq, "IRQ lines");
-module_param_array(dma, int, NULL, 0);
+module_param_hw_array(dma, int, dma, NULL, 0);
 MODULE_PARM_DESC(dma, "DMA channels");
 module_param(dongle_id, int, 0);
 MODULE_PARM_DESC(dongle_id, "Type-id of used dongle");
diff --git a/drivers/net/irda/smsc-ircc2.c b/drivers/net/irda/smsc-ircc2.c
index dcf92ba80872..23ed89ae5ddc 100644
--- a/drivers/net/irda/smsc-ircc2.c
+++ b/drivers/net/irda/smsc-ircc2.c
@@ -82,24 +82,24 @@ MODULE_PARM_DESC(nopnp, "Do not use PNP to detect controller settings, defaults
 
 #define DMA_INVAL 255
 static int ircc_dma = DMA_INVAL;
-module_param(ircc_dma, int, 0);
+module_param_hw(ircc_dma, int, dma, 0);
 MODULE_PARM_DESC(ircc_dma, "DMA channel");
 
 #define IRQ_INVAL 255
 static int ircc_irq = IRQ_INVAL;
-module_param(ircc_irq, int, 0);
+module_param_hw(ircc_irq, int, irq, 0);
 MODULE_PARM_DESC(ircc_irq, "IRQ line");
 
 static int ircc_fir;
-module_param(ircc_fir, int, 0);
+module_param_hw(ircc_fir, int, ioport, 0);
 MODULE_PARM_DESC(ircc_fir, "FIR Base Address");
 
 static int ircc_sir;
-module_param(ircc_sir, int, 0);
+module_param_hw(ircc_sir, int, ioport, 0);
 MODULE_PARM_DESC(ircc_sir, "SIR Base Address");
 
 static int ircc_cfg;
-module_param(ircc_cfg, int, 0);
+module_param_hw(ircc_cfg, int, ioport, 0);
 MODULE_PARM_DESC(ircc_cfg, "Configuration register base address");
 
 static int ircc_transceiver;
diff --git a/drivers/net/irda/w83977af_ir.c b/drivers/net/irda/w83977af_ir.c
index 8d5b903d1d9d..282b6c9ae05b 100644
--- a/drivers/net/irda/w83977af_ir.c
+++ b/drivers/net/irda/w83977af_ir.c
@@ -1263,9 +1263,9 @@ MODULE_LICENSE("GPL");
 
 module_param(qos_mtt_bits, int, 0);
 MODULE_PARM_DESC(qos_mtt_bits, "Mimimum Turn Time");
-module_param_array(io, int, NULL, 0);
+module_param_hw_array(io, int, ioport, NULL, 0);
 MODULE_PARM_DESC(io, "Base I/O addresses");
-module_param_array(irq, int, NULL, 0);
+module_param_hw_array(irq, int, irq, NULL, 0);
 MODULE_PARM_DESC(irq, "IRQ lines");
 
 /*

[PATCH 22/38] Annotate hardware config module parameters in drivers/net/wan/

[David Howells]

When the kernel is running in secure boot mode, we lock down the kernel to
prevent userspace from modifying the running kernel image.  Whilst this
includes prohibiting access to things like /dev/mem, it must also prevent
access by means of configuring driver modules in such a way as to cause a
device to access or modify the kernel image.

To this end, annotate module_param* statements that refer to hardware
configuration and indicate for future reference what type of parameter they
specify.  The parameter parser in the core sees this information and can
skip such parameters with an error message if the kernel is locked down.
The module initialisation then runs as normal, but just sees whatever the
default values for those parameters is.

Note that we do still need to do the module initialisation because some
drivers have viable defaults set in case parameters aren't specified and
some drivers support automatic configuration (e.g. PNP or PCI) in addition
to manually coded parameters.

This patch annotates drivers in drivers/net/wan/.

Suggested-by: Alan Cox <gnomes@lxorguk.ukuu.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: "Jan \"Yenya\" Kasprzak" <kas@fi.muni.cz>
cc: netdev@vger.kernel.org
---

 drivers/net/wan/cosa.c         |    6 +++---
 drivers/net/wan/hostess_sv11.c |    6 +++---
 drivers/net/wan/sbni.c         |    4 ++--
 drivers/net/wan/sealevel.c     |    8 ++++----
 4 files changed, 12 insertions(+), 12 deletions(-)

diff --git a/drivers/net/wan/cosa.c b/drivers/net/wan/cosa.c
index 4ca71bca39ac..6ea16260ec76 100644
--- a/drivers/net/wan/cosa.c
+++ b/drivers/net/wan/cosa.c
@@ -232,11 +232,11 @@ static int irq[MAX_CARDS+1] = { -1, -1, -1, -1, -1, -1, 0, };
 static struct class *cosa_class;
 
 #ifdef MODULE
-module_param_array(io, int, NULL, 0);
+module_param_hw_array(io, int, ioport, NULL, 0);
 MODULE_PARM_DESC(io, "The I/O bases of the COSA or SRP cards");
-module_param_array(irq, int, NULL, 0);
+module_param_hw_array(irq, int, irq, NULL, 0);
 MODULE_PARM_DESC(irq, "The IRQ lines of the COSA or SRP cards");
-module_param_array(dma, int, NULL, 0);
+module_param_hw_array(dma, int, dma, NULL, 0);
 MODULE_PARM_DESC(dma, "The DMA channels of the COSA or SRP cards");
 
 MODULE_AUTHOR("Jan \"Yenya\" Kasprzak, <kas@fi.muni.cz>");
diff --git a/drivers/net/wan/hostess_sv11.c b/drivers/net/wan/hostess_sv11.c
index dd6bb3364ad2..4de0737fbf8a 100644
--- a/drivers/net/wan/hostess_sv11.c
+++ b/drivers/net/wan/hostess_sv11.c
@@ -324,11 +324,11 @@ static void sv11_shutdown(struct z8530_dev *dev)
 static int io = 0x200;
 static int irq = 9;
 
-module_param(io, int, 0);
+module_param_hw(io, int, ioport, 0);
 MODULE_PARM_DESC(io, "The I/O base of the Comtrol Hostess SV11 card");
-module_param(dma, int, 0);
+module_param_hw(dma, int, dma, 0);
 MODULE_PARM_DESC(dma, "Set this to 1 to use DMA1/DMA3 for TX/RX");
-module_param(irq, int, 0);
+module_param_hw(irq, int, irq, 0);
 MODULE_PARM_DESC(irq, "The interrupt line setting for the Comtrol Hostess SV11 card");
 
 MODULE_AUTHOR("Alan Cox");
diff --git a/drivers/net/wan/sbni.c b/drivers/net/wan/sbni.c
index 3ca3419c54a0..bde8c0339831 100644
--- a/drivers/net/wan/sbni.c
+++ b/drivers/net/wan/sbni.c
@@ -1463,8 +1463,8 @@ set_multicast_list( struct net_device  *dev )
 
 
 #ifdef MODULE
-module_param_array(io, int, NULL, 0);
-module_param_array(irq, int, NULL, 0);
+module_param_hw_array(io, int, ioport, NULL, 0);
+module_param_hw_array(irq, int, irq, NULL, 0);
 module_param_array(baud, int, NULL, 0);
 module_param_array(rxl, int, NULL, 0);
 module_param_array(mac, int, NULL, 0);
diff --git a/drivers/net/wan/sealevel.c b/drivers/net/wan/sealevel.c
index fbb5aa2c4d8f..c56f2c252113 100644
--- a/drivers/net/wan/sealevel.c
+++ b/drivers/net/wan/sealevel.c
@@ -363,13 +363,13 @@ static int rxdma=3;
 static int irq=5;
 static bool slow=false;
 
-module_param(io, int, 0);
+module_param_hw(io, int, ioport, 0);
 MODULE_PARM_DESC(io, "The I/O base of the Sealevel card");
-module_param(txdma, int, 0);
+module_param_hw(txdma, int, dma, 0);
 MODULE_PARM_DESC(txdma, "Transmit DMA channel");
-module_param(rxdma, int, 0);
+module_param_hw(rxdma, int, dma, 0);
 MODULE_PARM_DESC(rxdma, "Receive DMA channel");
-module_param(irq, int, 0);
+module_param_hw(irq, int, irq, 0);
 MODULE_PARM_DESC(irq, "The interrupt line setting for the SeaLevel card");
 module_param(slow, bool, 0);
 MODULE_PARM_DESC(slow, "Set this for an older Sealevel card such as the 4012");

[PATCH 23/38] Annotate hardware config module parameters in drivers/net/wireless/

[David Howells]

When the kernel is running in secure boot mode, we lock down the kernel to
prevent userspace from modifying the running kernel image.  Whilst this
includes prohibiting access to things like /dev/mem, it must also prevent
access by means of configuring driver modules in such a way as to cause a
device to access or modify the kernel image.

To this end, annotate module_param* statements that refer to hardware
configuration and indicate for future reference what type of parameter they
specify.  The parameter parser in the core sees this information and can
skip such parameters with an error message if the kernel is locked down.
The module initialisation then runs as normal, but just sees whatever the
default values for those parameters is.

Note that we do still need to do the module initialisation because some
drivers have viable defaults set in case parameters aren't specified and
some drivers support automatic configuration (e.g. PNP or PCI) in addition
to manually coded parameters.

This patch annotates drivers in drivers/net/wireless/.

Suggested-by: Alan Cox <gnomes@lxorguk.ukuu.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Kalle Valo <kvalo@codeaurora.org>
cc: linux-wireless@vger.kernel.org
cc: netdev@vger.kernel.org
---

 drivers/net/wireless/cisco/airo.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/cisco/airo.c b/drivers/net/wireless/cisco/airo.c
index 4b040451a9b8..1b7e125a28e2 100644
--- a/drivers/net/wireless/cisco/airo.c
+++ b/drivers/net/wireless/cisco/airo.c
@@ -246,8 +246,8 @@ MODULE_DESCRIPTION("Support for Cisco/Aironet 802.11 wireless ethernet cards.  "
 		   "Direct support for ISA/PCI/MPI cards and support for PCMCIA when used with airo_cs.");
 MODULE_LICENSE("Dual BSD/GPL");
 MODULE_SUPPORTED_DEVICE("Aironet 4500, 4800 and Cisco 340/350");
-module_param_array(io, int, NULL, 0);
-module_param_array(irq, int, NULL, 0);
+module_param_hw_array(io, int, ioport, NULL, 0);
+module_param_hw_array(irq, int, irq, NULL, 0);
 module_param_array(rates, int, NULL, 0);
 module_param_array(ssids, charp, NULL, 0);
 module_param(auto_wep, int, 0);

Re: [PATCH 18/38] Annotate hardware config module parameters in drivers/net/can/

[Marc Kleine-Budde]

[-- Attachment #1.1: Type: text/plain, Size: 1811 bytes --]

On 04/05/2017 06:59 PM, David Howells wrote:
> When the kernel is running in secure boot mode, we lock down the kernel to
> prevent userspace from modifying the running kernel image.  Whilst this
> includes prohibiting access to things like /dev/mem, it must also prevent
> access by means of configuring driver modules in such a way as to cause a
> device to access or modify the kernel image.
> 
> To this end, annotate module_param* statements that refer to hardware
> configuration and indicate for future reference what type of parameter they
> specify.  The parameter parser in the core sees this information and can
> skip such parameters with an error message if the kernel is locked down.
> The module initialisation then runs as normal, but just sees whatever the
> default values for those parameters is.
> 
> Note that we do still need to do the module initialisation because some
> drivers have viable defaults set in case parameters aren't specified and
> some drivers support automatic configuration (e.g. PNP or PCI) in addition
> to manually coded parameters.
> 
> This patch annotates drivers in drivers/net/can/.
> 
> Suggested-by: Alan Cox <gnomes@lxorguk.ukuu.org.uk>
> Signed-off-by: David Howells <dhowells@redhat.com>
> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
> cc: Wolfgang Grandegger <wg@grandegger.com>
> cc: linux-can@vger.kernel.org
> cc: netdev@vger.kernel.org

Who whill take this patch? Or will it be allied as part of the series by
some of my upstreams?

Marc

-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH 18/38] Annotate hardware config module parameters in drivers/net/can/

[David Howells]

Marc Kleine-Budde <mkl@pengutronix.de> wrote:

> Who whill take this patch? Or will it be allied as part of the series by
> some of my upstreams?

I'm going to try and get the whole series in in one go.

David