From: Hau <hau@realtek.com>
To: Andrew Lunn <andrew@lunn.ch>, Heiner Kallweit <hkallweit1@gmail.com>
Cc: "netdev@vger.kernel.org" <netdev@vger.kernel.org>,
nic_swsd <nic_swsd@realtek.com>
Subject: RE: [PATCH net] r8169: fix rtl8168h wol fail
Date: Fri, 6 Jan 2023 06:53:12 +0000 [thread overview]
Message-ID: <9ee2f626bab3481697b71c58091e7def@realtek.com> (raw)
In-Reply-To: <Y7dAbxSPeaMnW/ly@lunn.ch>
> > > rtl8168h has an application that it will connect to rtl8211fs
> > > through mdi interface. And rtl8211fs will connect to fiber through serdes
> interface.
> > > In this application, rtl8168h revision id will be set to 0x2a.
> > >
> > > Because rtl8211fs's firmware will set link capability to 100M and
> > > GIGA when link is from off to on. So when system suspend and wol is
> > > enabled, rtl8168h will speed down to 100M (because rtl8211fs
> > > advertise 100M and GIGA to rtl8168h). If the link speed between
> rtl81211fs and fiber is GIGA.
> > > The link speed between rtl8168h and fiber will mismatch. That will
> > > cause wol fail.
> > >
> > > In this patch, if rtl8168h is in this kind of application, driver
> > > will not speed down phy when wol is enabled.
> > >
> > I think the patch title is inappropriate because WoL works normally on
> > RTL8168h in the standard setup.
> > What you add isn't a fix but a workaround for a firmware bug in RTL8211FS.
> > As mentioned in a previous review comment: if speed on fibre side is
> > 1Gbps then RTL8211FS shouldn't advertise 100Mbps on MDI/UTP side.
> > Last but not least the user can still use e.g. ethtool to change the
> > speed to 100Mbps thus breaking the link.
>
> I agree with Heiner here. I assume you cannot fix the firmware?
>
> So can we detect the broken firmware and correctly set
> phydev->advertising? That will fix WoL and should prevent the user
> from using ethtool to select a slower speed.
>
It is a rtl8211fs's firmware bug. Because in this application it will support both 100M and GIGA
fiber module, so it cannot just set phydev->advertising to 100M or GIGA. We may need to
use bit-bang MDIO to detect fiber link speed and set phydev->advertising properly. But it will
let this patch become more complicated.
------Please consider the environment before printing this e-mail.
next prev parent reply other threads:[~2023-01-06 6:53 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-05 18:04 [PATCH net] r8169: fix rtl8168h wol fail Chunhao Lin
2023-01-05 19:37 ` Heiner Kallweit
2023-01-05 21:26 ` Andrew Lunn
2023-01-06 6:53 ` Hau [this message]
2023-01-06 14:03 ` Andrew Lunn
2023-01-06 18:40 ` Heiner Kallweit
2023-01-10 17:03 ` Hau
2023-01-10 21:59 ` Heiner Kallweit
2023-01-11 17:23 ` Hau
2023-01-11 19:40 ` Heiner Kallweit
2023-01-11 21:40 ` Andrew Lunn
2023-01-13 16:23 ` Hau
2023-01-13 16:36 ` Andrew Lunn
2023-01-13 22:28 ` Heiner Kallweit
2023-01-16 17:04 ` Hau
2023-01-16 17:59 ` Heiner Kallweit
2023-01-18 16:57 ` Hau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9ee2f626bab3481697b71c58091e7def@realtek.com \
--to=hau@realtek.com \
--cc=andrew@lunn.ch \
--cc=hkallweit1@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=nic_swsd@realtek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).