From: Giacinto Cifelli <gciofono@gmail.com>
To: oliver@neukum.org, davem@davemloft.net, kuba@kernel.org,
linux-usb@vger.kernel.org, netdev@vger.kernel.org
Subject: Re: [PATCH] net: usb: qmi_wwan: added support for Thales Cinterion PLSx3 modem family
Date: Tue, 26 Jan 2021 05:46:08 +0100 [thread overview]
Message-ID: <CAKSBH7H3Oqp3xLOcxwgRk8MXoOqM8fqFV=Uk5wtSKjruwDeMnA@mail.gmail.com> (raw)
In-Reply-To: <20210126044155.8348-1-gciofono@gmail.com>
Dear all,
please ignore this. I have sent the wrong patch. This one, in v2, I
am told that has been applied already.
Apologies again.
Kind Regards,
Giacinto
On Tue, Jan 26, 2021 at 5:42 AM Giacinto Cifelli <gciofono@gmail.com> wrote:
>
> Bus 003 Device 009: ID 1e2d:006f
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 2.00
> bDeviceClass 239 Miscellaneous Device
> bDeviceSubClass 2 ?
> bDeviceProtocol 1 Interface Association
> bMaxPacketSize0 64
> idVendor 0x1e2d
> idProduct 0x006f
> bcdDevice 0.00
> iManufacturer 3 Cinterion Wireless Modules
> iProduct 2 PLSx3
> iSerial 4 fa3c1419
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 303
> bNumInterfaces 9
> bConfigurationValue 1
> iConfiguration 1 Cinterion Configuration
> bmAttributes 0xe0
> Self Powered
> Remote Wakeup
> MaxPower 500mA
> Interface Association:
> bLength 8
> bDescriptorType 11
> bFirstInterface 0
> bInterfaceCount 2
> bFunctionClass 2 Communications
> bFunctionSubClass 2 Abstract (modem)
> bFunctionProtocol 1 AT-commands (v.25ter)
> iFunction 0
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 2 Communications
> bInterfaceSubClass 2 Abstract (modem)
> bInterfaceProtocol 1 AT-commands (v.25ter)
> iInterface 0
> CDC Header:
> bcdCDC 1.10
> CDC ACM:
> bmCapabilities 0x02
> line coding and serial state
> CDC Call Management:
> bmCapabilities 0x03
> call management
> use DataInterface
> bDataInterface 1
> CDC Union:
> bMasterInterface 0
> bSlaveInterface 1
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0040 1x 64 bytes
> bInterval 5
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 1
> bAlternateSetting 0
> bNumEndpoints 2
> bInterfaceClass 10 CDC Data
> bInterfaceSubClass 0 Unused
> bInterfaceProtocol 0
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x82 EP 2 IN
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x01 EP 1 OUT
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Interface Association:
> bLength 8
> bDescriptorType 11
> bFirstInterface 2
> bInterfaceCount 2
> bFunctionClass 2 Communications
> bFunctionSubClass 2 Abstract (modem)
> bFunctionProtocol 1 AT-commands (v.25ter)
> iFunction 0
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 2
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 2 Communications
> bInterfaceSubClass 2 Abstract (modem)
> bInterfaceProtocol 1 AT-commands (v.25ter)
> iInterface 0
> CDC Header:
> bcdCDC 1.10
> CDC ACM:
> bmCapabilities 0x02
> line coding and serial state
> CDC Call Management:
> bmCapabilities 0x03
> call management
> use DataInterface
> bDataInterface 3
> CDC Union:
> bMasterInterface 2
> bSlaveInterface 3
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x83 EP 3 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0040 1x 64 bytes
> bInterval 5
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 3
> bAlternateSetting 0
> bNumEndpoints 2
> bInterfaceClass 10 CDC Data
> bInterfaceSubClass 0 Unused
> bInterfaceProtocol 0
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x84 EP 4 IN
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x02 EP 2 OUT
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Interface Association:
> bLength 8
> bDescriptorType 11
> bFirstInterface 4
> bInterfaceCount 2
> bFunctionClass 2 Communications
> bFunctionSubClass 2 Abstract (modem)
> bFunctionProtocol 1 AT-commands (v.25ter)
> iFunction 0
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 4
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 2 Communications
> bInterfaceSubClass 2 Abstract (modem)
> bInterfaceProtocol 1 AT-commands (v.25ter)
> iInterface 0
> CDC Header:
> bcdCDC 1.10
> CDC ACM:
> bmCapabilities 0x02
> line coding and serial state
> CDC Call Management:
> bmCapabilities 0x03
> call management
> use DataInterface
> bDataInterface 5
> CDC Union:
> bMasterInterface 4
> bSlaveInterface 5
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x85 EP 5 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0040 1x 64 bytes
> bInterval 5
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 5
> bAlternateSetting 0
> bNumEndpoints 2
> bInterfaceClass 10 CDC Data
> bInterfaceSubClass 0 Unused
> bInterfaceProtocol 0
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x86 EP 6 IN
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x03 EP 3 OUT
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Interface Association:
> bLength 8
> bDescriptorType 11
> bFirstInterface 6
> bInterfaceCount 2
> bFunctionClass 2 Communications
> bFunctionSubClass 2 Abstract (modem)
> bFunctionProtocol 1 AT-commands (v.25ter)
> iFunction 0
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 6
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 2 Communications
> bInterfaceSubClass 2 Abstract (modem)
> bInterfaceProtocol 1 AT-commands (v.25ter)
> iInterface 0
> CDC Header:
> bcdCDC 1.10
> CDC ACM:
> bmCapabilities 0x02
> line coding and serial state
> CDC Call Management:
> bmCapabilities 0x03
> call management
> use DataInterface
> bDataInterface 7
> CDC Union:
> bMasterInterface 6
> bSlaveInterface 7
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x87 EP 7 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0040 1x 64 bytes
> bInterval 5
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 7
> bAlternateSetting 0
> bNumEndpoints 2
> bInterfaceClass 10 CDC Data
> bInterfaceSubClass 0 Unused
> bInterfaceProtocol 0
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x88 EP 8 IN
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x04 EP 4 OUT
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 8
> bAlternateSetting 0
> bNumEndpoints 3
> bInterfaceClass 255 Vendor Specific Class
> bInterfaceSubClass 255 Vendor Specific Subclass
> bInterfaceProtocol 255 Vendor Specific Protocol
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x89 EP 9 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0040 1x 64 bytes
> bInterval 5
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x8a EP 10 IN
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x05 EP 5 OUT
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Device Qualifier (for other device speed):
> bLength 10
> bDescriptorType 6
> bcdUSB 2.00
> bDeviceClass 239 Miscellaneous Device
> bDeviceSubClass 2 ?
> bDeviceProtocol 1 Interface Association
> bMaxPacketSize0 64
> bNumConfigurations 1
> Device Status: 0x0000
> (Bus Powered)
>
> Signed-off-by: Giacinto Cifelli <gciofono@gmail.com>
> ---
> drivers/net/usb/qmi_wwan.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
> index af19513a9f75..262d19439b34 100644
> --- a/drivers/net/usb/qmi_wwan.c
> +++ b/drivers/net/usb/qmi_wwan.c
> @@ -1302,6 +1302,8 @@ static const struct usb_device_id products[] = {
> {QMI_FIXED_INTF(0x0b3c, 0xc00a, 6)}, /* Olivetti Olicard 160 */
> {QMI_FIXED_INTF(0x0b3c, 0xc00b, 4)}, /* Olivetti Olicard 500 */
> {QMI_FIXED_INTF(0x1e2d, 0x0060, 4)}, /* Cinterion PLxx */
> + {QMI_FIXED_INTF(0x1e2d, 0x006f, 8)}, /* Cinterion PLS83/PLS63 */
> + {QMI_QUIRK_SET_DTR(0x1e2d, 0x006f, 8)},
> {QMI_FIXED_INTF(0x1e2d, 0x0053, 4)}, /* Cinterion PHxx,PXxx */
> {QMI_FIXED_INTF(0x1e2d, 0x0063, 10)}, /* Cinterion ALASxx (1 RmNet) */
> {QMI_FIXED_INTF(0x1e2d, 0x0082, 4)}, /* Cinterion PHxx,PXxx (2 RmNet) */
> --
> 2.17.1
>
next prev parent reply other threads:[~2021-01-26 22:53 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-26 4:41 [PATCH] net: usb: qmi_wwan: added support for Thales Cinterion PLSx3 modem family Giacinto Cifelli
2021-01-26 4:46 ` Giacinto Cifelli [this message]
-- strict thread matches above, loose matches on Subject: below --
2021-01-18 5:46 Giacinto Cifelli
[not found] ` <20210118115250.GA1428@t-online.de>
2021-01-18 21:02 ` Bjørn Mork
2021-01-20 12:36 ` Giacinto Cifelli
2021-01-20 13:13 ` Bjørn Mork
2021-01-20 14:37 ` Giacinto Cifelli
2021-01-21 0:29 ` Jakub Kicinski
2021-01-20 4:56 ` Giacinto Cifelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAKSBH7H3Oqp3xLOcxwgRk8MXoOqM8fqFV=Uk5wtSKjruwDeMnA@mail.gmail.com' \
--to=gciofono@gmail.com \
--cc=davem@davemloft.net \
--cc=kuba@kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=oliver@neukum.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).