[PATCH net-next] net: sfp: report error on failure to read sfp soft status

[PATCH net-next] net: sfp: report error on failure to read sfp soft status

[Russell King]

Report a rate-limited error if we fail to read the SFP soft status,
and preserve the current status in that case. This avoids I2C bus
errors from triggering a link flap.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
 drivers/net/phy/sfp.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/net/phy/sfp.c b/drivers/net/phy/sfp.c
index e54aef921038..73c2969f11a4 100644
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -442,13 +442,20 @@ static unsigned int sfp_soft_get_state(struct sfp *sfp)
 {
 	unsigned int state = 0;
 	u8 status;
+	int ret;
 
-	if (sfp_read(sfp, true, SFP_STATUS, &status, sizeof(status)) ==
-		     sizeof(status)) {
+	ret = sfp_read(sfp, true, SFP_STATUS, &status, sizeof(status));
+	if (ret == sizeof(status)) {
 		if (status & SFP_STATUS_RX_LOS)
 			state |= SFP_F_LOS;
 		if (status & SFP_STATUS_TX_FAULT)
 			state |= SFP_F_TX_FAULT;
+	} else {
+		dev_err_ratelimited(sfp->dev,
+				    "failed to read SFP soft status: %d\n",
+				    ret);
+		/* Preserve the current state */
+		state = sfp->state;
 	}
 
 	return state & sfp->state_soft_mask;
-- 
2.20.1

Re: [PATCH net-next] net: sfp: report error on failure to read sfp soft status

[David Miller]

From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Tue, 17 Dec 2019 13:50:29 +0000

> Report a rate-limited error if we fail to read the SFP soft status,
> and preserve the current status in that case. This avoids I2C bus
> errors from triggering a link flap.
> 
> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

Applied.