From: Russell King <rmk+kernel@armlinux.org.uk>
To: Andrew Lunn <andrew@lunn.ch>,
Florian Fainelli <f.fainelli@gmail.com>,
Heiner Kallweit <hkallweit1@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>,
netdev@vger.kernel.org, Shawn Guo <shawnguo@kernel.org>,
Li Yang <leoyang.li@nxp.com>, Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org
Subject: [RFC net-next 3/5] arm64: dts: lx2160a: add PCS MDIO nodes
Date: Tue, 17 Mar 2020 14:52:56 +0000 [thread overview]
Message-ID: <E1jEDaS-0008JO-Po@rmk-PC.armlinux.org.uk> (raw)
In-Reply-To: <20200317144944.GP25745@shell.armlinux.org.uk>
*NOT FOR MERGING*
Add PCS MDIO nodes for the LX2160A, which will be used when the MAC
is in PHY mode and is using in-band negotiation.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
.../arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 144 ++++++++++++++++++
1 file changed, 144 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index e5ee5591e52b..732af33eec18 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -960,6 +960,132 @@
status = "disabled";
};
+ pcs_mdio1: mdio@8c07000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8c07000 0x0 0x1000>;
+ little-endian;
+ status = "disabled";
+ };
+
+ pcs_mdio2: mdio@8c0b000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8c0b000 0x0 0x1000>;
+ little-endian;
+ status = "disabled";
+ };
+
+ pcs_mdio3: mdio@8c0f000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8c0f000 0x0 0x1000>;
+ little-endian;
+ status = "disabled";
+ };
+
+ pcs_mdio4: mdio@8c13000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8c13000 0x0 0x1000>;
+ little-endian;
+ status = "disabled";
+ };
+
+ pcs_mdio5: mdio@8c17000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8c17000 0x0 0x1000>;
+ little-endian;
+ status = "disabled";
+ };
+
+ pcs_mdio6: mdio@8c1b000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8c1b000 0x0 0x1000>;
+ little-endian;
+ status = "disabled";
+ };
+
+ pcs_mdio7: mdio@8c1f000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8c1f000 0x0 0x1000>;
+ little-endian;
+ status = "disabled";
+ };
+
+ pcs_mdio8: mdio@8c23000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8c23000 0x0 0x1000>;
+ little-endian;
+ status = "disabled";
+ };
+
+ pcs_mdio9: mdio@8c27000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8c27000 0x0 0x1000>;
+ little-endian;
+ status = "disabled";
+ };
+
+ pcs_mdio10: mdio@8c2b000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8c2b000 0x0 0x1000>;
+ little-endian;
+ status = "disabled";
+ };
+
+ pcs_mdio11: mdio@8c2f000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8c2f000 0x0 0x1000>;
+ little-endian;
+ status = "disabled";
+ };
+
+ pcs_mdio12: mdio@8c33000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8c33000 0x0 0x1000>;
+ little-endian;
+ status = "disabled";
+ };
+
+ pcs_mdio13: mdio@8c37000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8c37000 0x0 0x1000>;
+ little-endian;
+ status = "disabled";
+ };
+
+ pcs_mdio14: mdio@8c3b000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8c3b000 0x0 0x1000>;
+ little-endian;
+ status = "disabled";
+ };
+
+ pcs_mdio15: mdio@8c3f000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8c3f000 0x0 0x1000>;
+ little-endian;
+ status = "disabled";
+ };
+
+ pcs_mdio16: mdio@8c43000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8c43000 0x0 0x1000>;
+ little-endian;
+ status = "disabled";
+ };
+
+ pcs_mdio17: mdio@8c47000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8c47000 0x0 0x1000>;
+ little-endian;
+ status = "disabled";
+ };
+
+ pcs_mdio18: mdio@8c4b000 {
+ compatible = "fsl,fman-memac-mdio";
+ reg = <0x0 0x8c4b000 0x0 0x1000>;
+ little-endian;
+ status = "disabled";
+ };
+
fsl_mc: fsl-mc@80c000000 {
compatible = "fsl,qoriq-mc";
reg = <0x00000008 0x0c000000 0 0x40>,
@@ -988,91 +1114,109 @@
dpmac1: dpmac@1 {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0x1>;
+ pcs-mdio = <&pcs_mdio1>;
};
dpmac2: dpmac@2 {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0x2>;
+ pcs-mdio = <&pcs_mdio2>;
};
dpmac3: dpmac@3 {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0x3>;
+ pcs-mdio = <&pcs_mdio3>;
};
dpmac4: dpmac@4 {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0x4>;
+ pcs-mdio = <&pcs_mdio4>;
};
dpmac5: dpmac@5 {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0x5>;
+ pcs-mdio = <&pcs_mdio5>;
};
dpmac6: dpmac@6 {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0x6>;
+ pcs-mdio = <&pcs_mdio6>;
};
dpmac7: dpmac@7 {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0x7>;
+ pcs-mdio = <&pcs_mdio7>;
};
dpmac8: dpmac@8 {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0x8>;
+ pcs-mdio = <&pcs_mdio8>;
};
dpmac9: dpmac@9 {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0x9>;
+ pcs-mdio = <&pcs_mdio9>;
};
dpmac10: dpmac@a {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0xa>;
+ pcs-mdio = <&pcs_mdio10>;
};
dpmac11: dpmac@b {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0xb>;
+ pcs-mdio = <&pcs_mdio11>;
};
dpmac12: dpmac@c {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0xc>;
+ pcs-mdio = <&pcs_mdio12>;
};
dpmac13: dpmac@d {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0xd>;
+ pcs-mdio = <&pcs_mdio13>;
};
dpmac14: dpmac@e {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0xe>;
+ pcs-mdio = <&pcs_mdio14>;
};
dpmac15: dpmac@f {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0xf>;
+ pcs-mdio = <&pcs_mdio15>;
};
dpmac16: dpmac@10 {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0x10>;
+ pcs-mdio = <&pcs_mdio16>;
};
dpmac17: dpmac@11 {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0x11>;
+ pcs-mdio = <&pcs_mdio17>;
};
dpmac18: dpmac@12 {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0x12>;
+ pcs-mdio = <&pcs_mdio18>;
};
};
};
--
2.20.1
next prev parent reply other threads:[~2020-03-17 14:53 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-17 14:49 [RFC net-next 0/2] split phylink PCS operations and add PCS support for dpaa2 Russell King - ARM Linux admin
2020-03-17 14:52 ` [RFC net-next 1/5] net: phylink: rename 'ops' to 'mac_ops' Russell King
2020-03-17 16:20 ` Andrew Lunn
2020-03-17 14:52 ` [RFC net-next 2/5] net: phylink: add separate pcs operations structure Russell King
2020-03-17 15:48 ` Jose Abreu
2020-03-17 15:56 ` Russell King - ARM Linux admin
2020-03-17 16:04 ` Jose Abreu
2020-03-17 16:52 ` Russell King - ARM Linux admin
2020-03-18 7:45 ` Jose Abreu
2020-03-19 11:14 ` Russell King - ARM Linux admin
2020-03-20 9:55 ` Jose Abreu
2020-03-17 16:38 ` Andrew Lunn
2020-03-17 16:54 ` Russell King - ARM Linux admin
2020-03-19 12:14 ` Russell King - ARM Linux admin
2020-03-19 15:06 ` Andrew Lunn
2020-03-19 17:20 ` Russell King - ARM Linux admin
2020-03-19 20:59 ` Russell King - ARM Linux admin
2020-03-24 19:46 ` Russell King - ARM Linux admin
2020-03-17 14:52 ` Russell King [this message]
2020-03-26 21:14 ` [RFC net-next 3/5] arm64: dts: lx2160a: add PCS MDIO nodes Ioana Ciornei
2020-03-26 21:21 ` Russell King - ARM Linux admin
2020-03-26 21:26 ` Ioana Ciornei
2020-03-17 14:53 ` [RFC net-next 4/5] dpaa2-mac: add 1000BASE-X/SGMII PCS support Russell King
2020-03-26 22:09 ` Ioana Ciornei
2020-03-17 14:53 ` [RFC net-next 5/5] dpaa2-mac: add 10GBASE-R " Russell King
2020-03-26 14:57 ` [RFC net-next 0/2] split phylink PCS operations and add PCS support for dpaa2 Russell King - ARM Linux admin
2020-03-26 15:04 ` Andrew Lunn
2020-03-26 15:14 ` [PATCH " Russell King - ARM Linux admin
2020-03-30 4:57 ` David Miller
2020-03-30 8:44 ` Russell King - ARM Linux admin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1jEDaS-0008JO-Po@rmk-PC.armlinux.org.uk \
--to=rmk+kernel@armlinux.org.uk \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=f.fainelli@gmail.com \
--cc=hkallweit1@gmail.com \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=netdev@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).