* [PATCH net-next 0/2] Convert Broadcom B53 to mac_link_up() resolved state
@ 2020-06-30 10:24 Russell King - ARM Linux admin
2020-06-30 10:25 ` [PATCH net-next 1/2] net: dsa/b53: change b53_force_port_config() pause argument Russell King
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Russell King - ARM Linux admin @ 2020-06-30 10:24 UTC (permalink / raw)
To: Andrew Lunn, Florian Fainelli, Heiner Kallweit
Cc: David S. Miller, Jakub Kicinski, netdev, Vivien Didelot
These two patches update the Broadcom B53 DSA support to use the newly
provided resolved link state via mac_link_up() rather than using the
state in mac_config().
drivers/net/dsa/b53/b53_common.c | 31 +++++++++++++++----------------
1 file changed, 15 insertions(+), 16 deletions(-)
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH net-next 1/2] net: dsa/b53: change b53_force_port_config() pause argument
2020-06-30 10:24 [PATCH net-next 0/2] Convert Broadcom B53 to mac_link_up() resolved state Russell King - ARM Linux admin
@ 2020-06-30 10:25 ` Russell King
2020-06-30 10:25 ` [PATCH net-next 2/2] net: dsa/b53: use resolved link config in mac_link_up() Russell King
2020-06-30 20:05 ` [PATCH net-next 0/2] Convert Broadcom B53 to mac_link_up() resolved state David Miller
2 siblings, 0 replies; 4+ messages in thread
From: Russell King @ 2020-06-30 10:25 UTC (permalink / raw)
To: Andrew Lunn, Florian Fainelli, Heiner Kallweit
Cc: David S. Miller, netdev, Vivien Didelot, Jakub Kicinski
Replace the b53_force_port_config() pause argument, which is based on
phylink's MLO_PAUSE_* definitions, to use a pair of booleans. This
will allow us to move b53_force_port_config() from
b53_phylink_mac_config() to b53_phylink_mac_link_up().
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
drivers/net/dsa/b53/b53_common.c | 25 +++++++++++++++----------
1 file changed, 15 insertions(+), 10 deletions(-)
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 1df05841ab6b..8a7fa6092b01 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -1037,7 +1037,8 @@ static void b53_force_link(struct b53_device *dev, int port, int link)
}
static void b53_force_port_config(struct b53_device *dev, int port,
- int speed, int duplex, int pause)
+ int speed, int duplex,
+ bool tx_pause, bool rx_pause)
{
u8 reg, val, off;
@@ -1075,9 +1076,9 @@ static void b53_force_port_config(struct b53_device *dev, int port,
return;
}
- if (pause & MLO_PAUSE_RX)
+ if (rx_pause)
reg |= PORT_OVERRIDE_RX_FLOW;
- if (pause & MLO_PAUSE_TX)
+ if (tx_pause)
reg |= PORT_OVERRIDE_TX_FLOW;
b53_write8(dev, B53_CTRL_PAGE, off, reg);
@@ -1089,22 +1090,24 @@ static void b53_adjust_link(struct dsa_switch *ds, int port,
struct b53_device *dev = ds->priv;
struct ethtool_eee *p = &dev->ports[port].eee;
u8 rgmii_ctrl = 0, reg = 0, off;
- int pause = 0;
+ bool tx_pause = false;
+ bool rx_pause = false;
if (!phy_is_pseudo_fixed_link(phydev))
return;
/* Enable flow control on BCM5301x's CPU port */
if (is5301x(dev) && port == dev->cpu_port)
- pause = MLO_PAUSE_TXRX_MASK;
+ tx_pause = rx_pause = true;
if (phydev->pause) {
if (phydev->asym_pause)
- pause |= MLO_PAUSE_TX;
- pause |= MLO_PAUSE_RX;
+ tx_pause = true;
+ rx_pause = true;
}
- b53_force_port_config(dev, port, phydev->speed, phydev->duplex, pause);
+ b53_force_port_config(dev, port, phydev->speed, phydev->duplex,
+ tx_pause, rx_pause);
b53_force_link(dev, port, phydev->link);
if (is531x5(dev) && phy_interface_is_rgmii(phydev)) {
@@ -1166,7 +1169,7 @@ static void b53_adjust_link(struct dsa_switch *ds, int port,
} else if (is5301x(dev)) {
if (port != dev->cpu_port) {
b53_force_port_config(dev, dev->cpu_port, 2000,
- DUPLEX_FULL, MLO_PAUSE_TXRX_MASK);
+ DUPLEX_FULL, true, true);
b53_force_link(dev, dev->cpu_port, 1);
}
}
@@ -1256,7 +1259,9 @@ void b53_phylink_mac_config(struct dsa_switch *ds, int port,
if (mode == MLO_AN_FIXED) {
b53_force_port_config(dev, port, state->speed,
- state->duplex, state->pause);
+ state->duplex,
+ !!(state->pause & MLO_PAUSE_TX),
+ !!(state->pause & MLO_PAUSE_RX));
return;
}
--
2.20.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH net-next 2/2] net: dsa/b53: use resolved link config in mac_link_up()
2020-06-30 10:24 [PATCH net-next 0/2] Convert Broadcom B53 to mac_link_up() resolved state Russell King - ARM Linux admin
2020-06-30 10:25 ` [PATCH net-next 1/2] net: dsa/b53: change b53_force_port_config() pause argument Russell King
@ 2020-06-30 10:25 ` Russell King
2020-06-30 20:05 ` [PATCH net-next 0/2] Convert Broadcom B53 to mac_link_up() resolved state David Miller
2 siblings, 0 replies; 4+ messages in thread
From: Russell King @ 2020-06-30 10:25 UTC (permalink / raw)
To: Andrew Lunn, Florian Fainelli, Heiner Kallweit
Cc: David S. Miller, netdev, Vivien Didelot, Jakub Kicinski
Convert the B53 driver to use the finalised link parameters in
mac_link_up() rather than the parameters in mac_config(). This is
just a matter of moving the call to b53_force_port_config().
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
drivers/net/dsa/b53/b53_common.c | 12 +++---------
1 file changed, 3 insertions(+), 9 deletions(-)
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 8a7fa6092b01..6500179c2ca2 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -1254,17 +1254,9 @@ void b53_phylink_mac_config(struct dsa_switch *ds, int port,
{
struct b53_device *dev = ds->priv;
- if (mode == MLO_AN_PHY)
+ if (mode == MLO_AN_PHY || mode == MLO_AN_FIXED)
return;
- if (mode == MLO_AN_FIXED) {
- b53_force_port_config(dev, port, state->speed,
- state->duplex,
- !!(state->pause & MLO_PAUSE_TX),
- !!(state->pause & MLO_PAUSE_RX));
- return;
- }
-
if ((phy_interface_mode_is_8023z(state->interface) ||
state->interface == PHY_INTERFACE_MODE_SGMII) &&
dev->ops->serdes_config)
@@ -1314,6 +1306,8 @@ void b53_phylink_mac_link_up(struct dsa_switch *ds, int port,
return;
if (mode == MLO_AN_FIXED) {
+ b53_force_port_config(dev, port, speed, duplex,
+ tx_pause, rx_pause);
b53_force_link(dev, port, true);
return;
}
--
2.20.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH net-next 0/2] Convert Broadcom B53 to mac_link_up() resolved state
2020-06-30 10:24 [PATCH net-next 0/2] Convert Broadcom B53 to mac_link_up() resolved state Russell King - ARM Linux admin
2020-06-30 10:25 ` [PATCH net-next 1/2] net: dsa/b53: change b53_force_port_config() pause argument Russell King
2020-06-30 10:25 ` [PATCH net-next 2/2] net: dsa/b53: use resolved link config in mac_link_up() Russell King
@ 2020-06-30 20:05 ` David Miller
2 siblings, 0 replies; 4+ messages in thread
From: David Miller @ 2020-06-30 20:05 UTC (permalink / raw)
To: linux; +Cc: andrew, f.fainelli, hkallweit1, kuba, netdev, vivien.didelot
From: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Date: Tue, 30 Jun 2020 11:24:30 +0100
> These two patches update the Broadcom B53 DSA support to use the newly
> provided resolved link state via mac_link_up() rather than using the
> state in mac_config().
Series applied.
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2020-06-30 20:05 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-06-30 10:24 [PATCH net-next 0/2] Convert Broadcom B53 to mac_link_up() resolved state Russell King - ARM Linux admin
2020-06-30 10:25 ` [PATCH net-next 1/2] net: dsa/b53: change b53_force_port_config() pause argument Russell King
2020-06-30 10:25 ` [PATCH net-next 2/2] net: dsa/b53: use resolved link config in mac_link_up() Russell King
2020-06-30 20:05 ` [PATCH net-next 0/2] Convert Broadcom B53 to mac_link_up() resolved state David Miller
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).