[net-next 00/15][pull request] 100GbE Intel Wired LAN Driver Updates 2020-07-29

[net-next 00/15][pull request] 100GbE Intel Wired LAN Driver Updates 2020-07-29

[Tony Nguyen]

This series contains updates to the ice driver only.

Dave works around LFC settings not being preserved through link events.
Fixes link issues with GLOBR reset and handling of multiple link events.

Nick restores VF MSI-X after PCI reset.

Kiran corrects the error code returned in ice_aq_sw_rules if the rule
does not exist.

Paul prevents overwriting of user set descriptors.

Tarun adds masking before accessing rate limiting profile types and
corrects queue bandwidth configuration.

Victor modifies Tx queue scheduler distribution to spread more evenly
across queue group nodes.

Krzysztof sets need_wakeup flag for Tx AF_XDP.

Brett allows VLANs in safe mode.

Marcin cleans up VSIs on probe failure.

Bruce reduces the scope of a variable.

Ben removes a FW workaround.

Tony fixes an unused parameter warning.

The following are changes since commit 490ed0b908d371cd9ab63fc142213e5d02d810ee:
  Merge branch 'net-stmmac-improve-WOL'
and are available in the git repository at:
  git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue 100GbE

Ben Shelton (1):
  ice: disable no longer needed workaround for FW logging

Brett Creeley (1):
  ice: Allow all VLANs in safe mode

Bruce Allan (1):
  ice: reduce scope of variable

Dave Ertman (3):
  ice: Implement LFC workaround
  ice: Fix link broken after GLOBR reset
  ice: fix link event handling timing

Kiran Patil (1):
  ice: return correct error code from ice_aq_sw_rules

Krzysztof Kazimierczak (1):
  ice: need_wakeup flag might not be set for Tx

Marcin Szycik (1):
  ice: cleanup VSI on probe fail

Nick Nunley (1):
  ice: restore VF MSI-X state during PCI reset

Paul M Stillwell Jr (1):
  ice: fix overwriting TX/RX descriptor values when rebuilding VSI

Tarun Singh (2):
  ice: Add RL profile bit mask check
  ice: Adjust scheduler default BW weight

Tony Nguyen (1):
  ice: fix unused parameter warning

Victor Raj (1):
  ice: distribute Tx queues evenly

 drivers/net/ethernet/intel/ice/ice_common.c   |  48 ++++-
 drivers/net/ethernet/intel/ice/ice_common.h   |   3 +
 drivers/net/ethernet/intel/ice/ice_controlq.c |   6 +-
 drivers/net/ethernet/intel/ice/ice_dcb.c      |  33 ----
 drivers/net/ethernet/intel/ice/ice_dcb_lib.c  |   6 +-
 drivers/net/ethernet/intel/ice/ice_dcb_lib.h  |  11 ++
 drivers/net/ethernet/intel/ice/ice_lib.c      |  10 +-
 drivers/net/ethernet/intel/ice/ice_main.c     | 185 ++++++++++++++++--
 drivers/net/ethernet/intel/ice/ice_sched.c    |  66 ++++++-
 drivers/net/ethernet/intel/ice/ice_switch.c   |   8 +-
 drivers/net/ethernet/intel/ice/ice_txrx.c     |   4 +-
 drivers/net/ethernet/intel/ice/ice_type.h     |   2 +-
 .../net/ethernet/intel/ice/ice_virtchnl_pf.c  |  30 +++
 .../net/ethernet/intel/ice/ice_virtchnl_pf.h  |   2 +
 drivers/net/ethernet/intel/ice/ice_xsk.c      |  10 +-
 15 files changed, 346 insertions(+), 78 deletions(-)

-- 
2.26.2

[net-next 01/15] ice: Implement LFC workaround

[Tony Nguyen]

From: Dave Ertman <david.m.ertman@intel.com>

There is a bug where the LFC settings are not being preserved
through a link event.  The registers in question are the ones
that are touched (and restored) when a set_local_mib AQ command
is performed.

On a link-up event, make sure that a set_local_mib is being
performed.

Move the function ice_aq_set_lldp_mib() from the DCB specific
ice_dcb.c to ice_common.c so that the driver always has access
to this AQ command.

Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/ice/ice_common.c  |  33 ++++++
 drivers/net/ethernet/intel/ice/ice_common.h  |   3 +
 drivers/net/ethernet/intel/ice/ice_dcb.c     |  33 ------
 drivers/net/ethernet/intel/ice/ice_dcb_lib.c |   4 -
 drivers/net/ethernet/intel/ice/ice_dcb_lib.h |  11 ++
 drivers/net/ethernet/intel/ice/ice_main.c    | 102 ++++++++++++++++++-
 6 files changed, 148 insertions(+), 38 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_common.c b/drivers/net/ethernet/intel/ice/ice_common.c
index 50939ad0e760..fd9534568bf3 100644
--- a/drivers/net/ethernet/intel/ice/ice_common.c
+++ b/drivers/net/ethernet/intel/ice/ice_common.c
@@ -4357,3 +4357,36 @@ bool ice_is_phy_caps_an_enabled(struct ice_aqc_get_phy_caps_data *caps)
 
 	return false;
 }
+
+/**
+ * ice_aq_set_lldp_mib - Set the LLDP MIB
+ * @hw: pointer to the HW struct
+ * @mib_type: Local, Remote or both Local and Remote MIBs
+ * @buf: pointer to the caller-supplied buffer to store the MIB block
+ * @buf_size: size of the buffer (in bytes)
+ * @cd: pointer to command details structure or NULL
+ *
+ * Set the LLDP MIB. (0x0A08)
+ */
+enum ice_status
+ice_aq_set_lldp_mib(struct ice_hw *hw, u8 mib_type, void *buf, u16 buf_size,
+		    struct ice_sq_cd *cd)
+{
+	struct ice_aqc_lldp_set_local_mib *cmd;
+	struct ice_aq_desc desc;
+
+	cmd = &desc.params.lldp_set_mib;
+
+	if (buf_size == 0 || !buf)
+		return ICE_ERR_PARAM;
+
+	ice_fill_dflt_direct_cmd_desc(&desc, ice_aqc_opc_lldp_set_local_mib);
+
+	desc.flags |= cpu_to_le16((u16)ICE_AQ_FLAG_RD);
+	desc.datalen = cpu_to_le16(buf_size);
+
+	cmd->type = mib_type;
+	cmd->length = cpu_to_le16(buf_size);
+
+	return ice_aq_send_cmd(hw, &desc, buf, buf_size, cd);
+}
diff --git a/drivers/net/ethernet/intel/ice/ice_common.h b/drivers/net/ethernet/intel/ice/ice_common.h
index 906113db6be6..3ebb973878c7 100644
--- a/drivers/net/ethernet/intel/ice/ice_common.h
+++ b/drivers/net/ethernet/intel/ice/ice_common.h
@@ -172,4 +172,7 @@ ice_stat_update32(struct ice_hw *hw, u32 reg, bool prev_stat_loaded,
 enum ice_status
 ice_sched_query_elem(struct ice_hw *hw, u32 node_teid,
 		     struct ice_aqc_txsched_elem_data *buf);
+enum ice_status
+ice_aq_set_lldp_mib(struct ice_hw *hw, u8 mib_type, void *buf, u16 buf_size,
+		    struct ice_sq_cd *cd);
 #endif /* _ICE_COMMON_H_ */
diff --git a/drivers/net/ethernet/intel/ice/ice_dcb.c b/drivers/net/ethernet/intel/ice/ice_dcb.c
index 2cecc9d08005..2a3147ee0bbb 100644
--- a/drivers/net/ethernet/intel/ice/ice_dcb.c
+++ b/drivers/net/ethernet/intel/ice/ice_dcb.c
@@ -134,39 +134,6 @@ ice_aq_start_lldp(struct ice_hw *hw, bool persist, struct ice_sq_cd *cd)
 	return ice_aq_send_cmd(hw, &desc, NULL, 0, cd);
 }
 
-/**
- * ice_aq_set_lldp_mib - Set the LLDP MIB
- * @hw: pointer to the HW struct
- * @mib_type: Local, Remote or both Local and Remote MIBs
- * @buf: pointer to the caller-supplied buffer to store the MIB block
- * @buf_size: size of the buffer (in bytes)
- * @cd: pointer to command details structure or NULL
- *
- * Set the LLDP MIB. (0x0A08)
- */
-static enum ice_status
-ice_aq_set_lldp_mib(struct ice_hw *hw, u8 mib_type, void *buf, u16 buf_size,
-		    struct ice_sq_cd *cd)
-{
-	struct ice_aqc_lldp_set_local_mib *cmd;
-	struct ice_aq_desc desc;
-
-	cmd = &desc.params.lldp_set_mib;
-
-	if (buf_size == 0 || !buf)
-		return ICE_ERR_PARAM;
-
-	ice_fill_dflt_direct_cmd_desc(&desc, ice_aqc_opc_lldp_set_local_mib);
-
-	desc.flags |= cpu_to_le16((u16)ICE_AQ_FLAG_RD);
-	desc.datalen = cpu_to_le16(buf_size);
-
-	cmd->type = mib_type;
-	cmd->length = cpu_to_le16(buf_size);
-
-	return ice_aq_send_cmd(hw, &desc, buf, buf_size, cd);
-}
-
 /**
  * ice_get_dcbx_status
  * @hw: pointer to the HW struct
diff --git a/drivers/net/ethernet/intel/ice/ice_dcb_lib.c b/drivers/net/ethernet/intel/ice/ice_dcb_lib.c
index 979af197f8a3..3b3a2789eb55 100644
--- a/drivers/net/ethernet/intel/ice/ice_dcb_lib.c
+++ b/drivers/net/ethernet/intel/ice/ice_dcb_lib.c
@@ -444,10 +444,6 @@ void ice_dcb_rebuild(struct ice_pf *pf)
 		goto dcb_error;
 	}
 
-	/* If DCB was not enabled previously, we are done */
-	if (!test_bit(ICE_FLAG_DCB_ENA, pf->flags))
-		return;
-
 	mutex_lock(&pf->tc_mutex);
 
 	if (!pf->hw.port_info->is_sw_lldp)
diff --git a/drivers/net/ethernet/intel/ice/ice_dcb_lib.h b/drivers/net/ethernet/intel/ice/ice_dcb_lib.h
index 323238669572..35c21d9ae009 100644
--- a/drivers/net/ethernet/intel/ice/ice_dcb_lib.h
+++ b/drivers/net/ethernet/intel/ice/ice_dcb_lib.h
@@ -53,6 +53,12 @@ ice_set_cgd_num(struct ice_tlan_ctx *tlan_ctx, struct ice_ring *ring)
 {
 	tlan_ctx->cgd_num = ring->dcb_tc;
 }
+
+static inline bool ice_is_dcb_active(struct ice_pf *pf)
+{
+	return (test_bit(ICE_FLAG_FW_LLDP_AGENT, pf->flags) ||
+		test_bit(ICE_FLAG_DCB_ENA, pf->flags));
+}
 #else
 #define ice_dcb_rebuild(pf) do {} while (0)
 
@@ -95,6 +101,11 @@ ice_tx_prepare_vlan_flags_dcb(struct ice_ring __always_unused *tx_ring,
 	return 0;
 }
 
+static inline bool ice_is_dcb_active(struct ice_pf __always_unused *pf)
+{
+	return false;
+}
+
 static inline bool
 ice_is_pfc_causing_hung_q(struct ice_pf __always_unused *pf,
 			  unsigned int __always_unused txqueue)
diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index 646c2cbc6904..fe0982d0717d 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -766,6 +766,100 @@ static void ice_vsi_link_event(struct ice_vsi *vsi, bool link_up)
 	}
 }
 
+/**
+ * ice_set_dflt_mib - send a default config MIB to the FW
+ * @pf: private PF struct
+ *
+ * This function sends a default configuration MIB to the FW.
+ *
+ * If this function errors out at any point, the driver is still able to
+ * function.  The main impact is that LFC may not operate as expected.
+ * Therefore an error state in this function should be treated with a DBG
+ * message and continue on with driver rebuild/reenable.
+ */
+static void ice_set_dflt_mib(struct ice_pf *pf)
+{
+	struct device *dev = ice_pf_to_dev(pf);
+	u8 mib_type, *buf, *lldpmib = NULL;
+	u16 len, typelen, offset = 0;
+	struct ice_lldp_org_tlv *tlv;
+	struct ice_hw *hw;
+	u32 ouisubtype;
+
+	if (!pf) {
+		dev_dbg(dev, "%s NULL pf pointer\n", __func__);
+		return;
+	}
+
+	hw = &pf->hw;
+	mib_type = SET_LOCAL_MIB_TYPE_LOCAL_MIB;
+	lldpmib = kzalloc(ICE_LLDPDU_SIZE, GFP_KERNEL);
+	if (!lldpmib) {
+		dev_dbg(dev, "%s Failed to allocate MIB memory\n",
+			__func__);
+		return;
+	}
+
+	/* Add ETS CFG TLV */
+	tlv = (struct ice_lldp_org_tlv *)lldpmib;
+	typelen = ((ICE_TLV_TYPE_ORG << ICE_LLDP_TLV_TYPE_S) |
+		   ICE_IEEE_ETS_TLV_LEN);
+	tlv->typelen = htons(typelen);
+	ouisubtype = ((ICE_IEEE_8021QAZ_OUI << ICE_LLDP_TLV_OUI_S) |
+		      ICE_IEEE_SUBTYPE_ETS_CFG);
+	tlv->ouisubtype = htonl(ouisubtype);
+
+	buf = tlv->tlvinfo;
+	buf[0] = 0;
+
+	/* ETS CFG all UPs map to TC 0. Next 4 (1 - 4) Octets = 0.
+	 * Octets 5 - 12 are BW values, set octet 5 to 100% BW.
+	 * Octets 13 - 20 are TSA values - leave as zeros
+	 */
+	buf[5] = 0x64;
+	len = (typelen & ICE_LLDP_TLV_LEN_M) >> ICE_LLDP_TLV_LEN_S;
+	offset += len + 2;
+	tlv = (struct ice_lldp_org_tlv *)
+		((char *)tlv + sizeof(tlv->typelen) + len);
+
+	/* Add ETS REC TLV */
+	buf = tlv->tlvinfo;
+	tlv->typelen = htons(typelen);
+
+	ouisubtype = ((ICE_IEEE_8021QAZ_OUI << ICE_LLDP_TLV_OUI_S) |
+		      ICE_IEEE_SUBTYPE_ETS_REC);
+	tlv->ouisubtype = htonl(ouisubtype);
+
+	/* First octet of buf is reserved
+	 * Octets 1 - 4 map UP to TC - all UPs map to zero
+	 * Octets 5 - 12 are BW values - set TC 0 to 100%.
+	 * Octets 13 - 20 are TSA value - leave as zeros
+	 */
+	buf[5] = 0x64;
+	offset += len + 2;
+	tlv = (struct ice_lldp_org_tlv *)
+		((char *)tlv + sizeof(tlv->typelen) + len);
+
+	/* Add PFC CFG TLV */
+	typelen = ((ICE_TLV_TYPE_ORG << ICE_LLDP_TLV_TYPE_S) |
+		   ICE_IEEE_PFC_TLV_LEN);
+	tlv->typelen = htons(typelen);
+
+	ouisubtype = ((ICE_IEEE_8021QAZ_OUI << ICE_LLDP_TLV_OUI_S) |
+		      ICE_IEEE_SUBTYPE_PFC_CFG);
+	tlv->ouisubtype = htonl(ouisubtype);
+
+	/* Octet 1 left as all zeros - PFC disabled */
+	buf[0] = 0x08;
+	len = (typelen & ICE_LLDP_TLV_LEN_M) >> ICE_LLDP_TLV_LEN_S;
+	offset += len + 2;
+
+	if (ice_aq_set_lldp_mib(hw, mib_type, (void *)lldpmib, offset, NULL))
+		dev_dbg(dev, "%s Failed to set default LLDP MIB\n", __func__);
+
+	kfree(lldpmib);
+}
+
 /**
  * ice_link_event - process the link event
  * @pf: PF that the link event is associated with
@@ -821,7 +915,13 @@ ice_link_event(struct ice_pf *pf, struct ice_port_info *pi, bool link_up,
 	if (link_up == old_link && link_speed == old_link_speed)
 		return result;
 
-	ice_dcb_rebuild(pf);
+	if (ice_is_dcb_active(pf)) {
+		if (test_bit(ICE_FLAG_DCB_ENA, pf->flags))
+			ice_dcb_rebuild(pf);
+	} else {
+		if (link_up)
+			ice_set_dflt_mib(pf);
+	}
 	ice_vsi_link_event(vsi, link_up);
 	ice_print_link_msg(vsi, link_up);
 
-- 
2.26.2

[net-next 02/15] ice: Fix link broken after GLOBR reset

[Tony Nguyen]

From: Dave Ertman <david.m.ertman@intel.com>

After a GLOBR, the link was broken so that a link
up situation was being seen as a link down.

The problem was that the rebuild process was updating
the port_info link status without doing any of the
other things that need to be done when link changes.

This was causing the port_info struct to have current
"UP" information so that any further UP interrupts
were skipped as redundant.

The rebuild flow should *not* be updating the port_info
struct link information, so eliminate this and leave
it to the link event handling code.

Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/ice/ice_main.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index fe0982d0717d..7b70ab3703a7 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -5913,10 +5913,6 @@ static void ice_rebuild(struct ice_pf *pf, enum ice_reset_req reset_type)
 	if (err)
 		goto err_sched_init_port;
 
-	err = ice_update_link_info(hw->port_info);
-	if (err)
-		dev_err(dev, "Get link status error %d\n", err);
-
 	/* start misc vector */
 	err = ice_req_irq_msix_misc(pf);
 	if (err) {
-- 
2.26.2

[net-next 03/15] ice: fix link event handling timing

[Tony Nguyen]

From: Dave Ertman <david.m.ertman@intel.com>

When the driver experiences a link event (especially link up)
there can be multiple events generated. Some of these are
link fault and still have a state of DOWN set.  The problem
happens when the link comes UP during the PF driver handling
one of the LINK DOWN events.  The status of the link is updated
and is now seen as UP, so when the actual LINK UP event comes,
the port information has already been updated to be seen as UP,
even though none of the UP activities have been completed.

After the link information has been updated in the link
handler and evaluated for MEDIA PRESENT, if the state
of the link has been changed to UP, treat the DOWN event
as an UP event since the link is now UP.

Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/ice/ice_dcb_lib.c | 2 +-
 drivers/net/ethernet/intel/ice/ice_main.c    | 6 ++++++
 2 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_dcb_lib.c b/drivers/net/ethernet/intel/ice/ice_dcb_lib.c
index 3b3a2789eb55..36abd6b7280c 100644
--- a/drivers/net/ethernet/intel/ice/ice_dcb_lib.c
+++ b/drivers/net/ethernet/intel/ice/ice_dcb_lib.c
@@ -463,7 +463,7 @@ void ice_dcb_rebuild(struct ice_pf *pf)
 		}
 	}
 
-	dev_info(dev, "DCB restored after reset\n");
+	dev_info(dev, "DCB info restored\n");
 	ret = ice_query_port_ets(pf->hw.port_info, &buf, sizeof(buf), NULL);
 	if (ret) {
 		dev_err(dev, "Query Port ETS failed\n");
diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index 7b70ab3703a7..e441cafaf23b 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -894,6 +894,12 @@ ice_link_event(struct ice_pf *pf, struct ice_port_info *pi, bool link_up,
 		dev_dbg(dev, "Failed to update link status and re-enable link events for port %d\n",
 			pi->lport);
 
+	/* Check if the link state is up after updating link info, and treat
+	 * this event as an UP event since the link is actually UP now.
+	 */
+	if (phy_info->link_info.link_info & ICE_AQ_LINK_UP)
+		link_up = true;
+
 	vsi = ice_get_main_vsi(pf);
 	if (!vsi || !vsi->port_info)
 		return -EINVAL;
-- 
2.26.2

[net-next 04/15] ice: restore VF MSI-X state during PCI reset

[Tony Nguyen]

From: Nick Nunley <nicholas.d.nunley@intel.com>

During a PCI FLR the MSI-X Enable flag in the VF PCI MSI-X capability
register will be cleared. This can lead to issues when a VF is
assigned to a VM because in these cases the VF driver receives no
indication of the PF PCI error/reset and additionally it is incapable
of restoring the cleared flag in the hypervisor configuration space
without fully reinitializing the driver interrupt functionality.

Since the VF driver is unable to easily resolve this condition on its own,
restore the VF MSI-X flag during the PF PCI reset handling.

Signed-off-by: Nick Nunley <nicholas.d.nunley@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/ice/ice_main.c     |  2 ++
 .../net/ethernet/intel/ice/ice_virtchnl_pf.c  | 30 +++++++++++++++++++
 .../net/ethernet/intel/ice/ice_virtchnl_pf.h  |  2 ++
 3 files changed, 34 insertions(+)

diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index e441cafaf23b..9b9e30a7d690 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -4623,6 +4623,8 @@ static void ice_pci_err_resume(struct pci_dev *pdev)
 		return;
 	}
 
+	ice_restore_all_vfs_msi_state(pdev);
+
 	ice_do_reset(pf, ICE_RESET_PFR);
 	ice_service_task_restart(pf);
 	mod_timer(&pf->serv_tmr, round_jiffies(jiffies + pf->serv_tmr_period));
diff --git a/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c b/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
index 9df5ceb26ab9..7061730f0f37 100644
--- a/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c
@@ -4071,3 +4071,33 @@ void ice_print_vfs_mdd_events(struct ice_pf *pf)
 		}
 	}
 }
+
+/**
+ * ice_restore_all_vfs_msi_state - restore VF MSI state after PF FLR
+ * @pdev: pointer to a pci_dev structure
+ *
+ * Called when recovering from a PF FLR to restore interrupt capability to
+ * the VFs.
+ */
+void ice_restore_all_vfs_msi_state(struct pci_dev *pdev)
+{
+	struct pci_dev *vfdev;
+	u16 vf_id;
+	int pos;
+
+	if (!pci_num_vf(pdev))
+		return;
+
+	pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_SRIOV);
+	if (pos) {
+		pci_read_config_word(pdev, pos + PCI_SRIOV_VF_DID,
+				     &vf_id);
+		vfdev = pci_get_device(pdev->vendor, vf_id, NULL);
+		while (vfdev) {
+			if (vfdev->is_virtfn && vfdev->physfn == pdev)
+				pci_restore_msi_state(vfdev);
+			vfdev = pci_get_device(pdev->vendor, vf_id,
+					       vfdev);
+		}
+	}
+}
diff --git a/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.h b/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.h
index 67aa9110fdd1..049e0b583383 100644
--- a/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.h
+++ b/drivers/net/ethernet/intel/ice/ice_virtchnl_pf.h
@@ -114,6 +114,7 @@ void ice_vc_notify_link_state(struct ice_pf *pf);
 void ice_vc_notify_reset(struct ice_pf *pf);
 bool ice_reset_all_vfs(struct ice_pf *pf, bool is_vflr);
 bool ice_reset_vf(struct ice_vf *vf, bool is_vflr);
+void ice_restore_all_vfs_msi_state(struct pci_dev *pdev);
 
 int
 ice_set_vf_port_vlan(struct net_device *netdev, int vf_id, u16 vlan_id, u8 qos,
@@ -146,6 +147,7 @@ void ice_print_vf_rx_mdd_event(struct ice_vf *vf);
 #define ice_vf_lan_overflow_event(pf, event) do {} while (0)
 #define ice_print_vfs_mdd_events(pf) do {} while (0)
 #define ice_print_vf_rx_mdd_event(vf) do {} while (0)
+#define ice_restore_all_vfs_msi_state(pdev) do {} while (0)
 
 static inline bool
 ice_reset_all_vfs(struct ice_pf __always_unused *pf,
-- 
2.26.2

[net-next 05/15] ice: return correct error code from ice_aq_sw_rules

[Tony Nguyen]

From: Kiran Patil <kiran.patil@intel.com>

Return ICE_ERR_DOES_NOT_EXIST return code if admin command error code is
ICE_AQ_RC_ENOENT (not exist). ice_aq_sw_rules is used when switch
rule is getting added/deleted/updated. In case of delete/update
switch rule, admin command can return ICE_AQ_RC_ENOENT error code
if such rule does not exist, hence return ICE_ERR_DOES_NOT_EXIST error
code from ice_aq_sw_rule, so that caller of this function can decide
how to handle ICE_ERR_DOES_NOT_EXIST.

Signed-off-by: Kiran Patil <kiran.patil@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/ice/ice_switch.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_switch.c b/drivers/net/ethernet/intel/ice/ice_switch.c
index ccbe1cc64295..c3a6c41385ee 100644
--- a/drivers/net/ethernet/intel/ice/ice_switch.c
+++ b/drivers/net/ethernet/intel/ice/ice_switch.c
@@ -495,6 +495,7 @@ ice_aq_sw_rules(struct ice_hw *hw, void *rule_list, u16 rule_list_sz,
 		u8 num_rules, enum ice_adminq_opc opc, struct ice_sq_cd *cd)
 {
 	struct ice_aq_desc desc;
+	enum ice_status status;
 
 	if (opc != ice_aqc_opc_add_sw_rules &&
 	    opc != ice_aqc_opc_update_sw_rules &&
@@ -506,7 +507,12 @@ ice_aq_sw_rules(struct ice_hw *hw, void *rule_list, u16 rule_list_sz,
 	desc.flags |= cpu_to_le16(ICE_AQ_FLAG_RD);
 	desc.params.sw_rules.num_rules_fltr_entry_index =
 		cpu_to_le16(num_rules);
-	return ice_aq_send_cmd(hw, &desc, rule_list, rule_list_sz, cd);
+	status = ice_aq_send_cmd(hw, &desc, rule_list, rule_list_sz, cd);
+	if (opc != ice_aqc_opc_add_sw_rules &&
+	    hw->adminq.sq_last_status == ICE_AQ_RC_ENOENT)
+		status = ICE_ERR_DOES_NOT_EXIST;
+
+	return status;
 }
 
 /* ice_init_port_info - Initialize port_info with switch configuration data
-- 
2.26.2

[net-next 06/15] ice: fix overwriting TX/RX descriptor values when rebuilding VSI

[Tony Nguyen]

From: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>

If a user sets the value of the TX or RX descriptors to some non-default
value using 'ethtool -G' then we need to not overwrite the values when
we rebuild the VSI. The VSI rebuild could happen as a result of a user
setting the number of queues via the 'ethtool -L' command. Fix this by
checking to see if the value we have stored is non-zero and if it is
then don't change the value.

Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/ice/ice_lib.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_lib.c b/drivers/net/ethernet/intel/ice/ice_lib.c
index 8f6a191839f1..84202c814c3b 100644
--- a/drivers/net/ethernet/intel/ice/ice_lib.c
+++ b/drivers/net/ethernet/intel/ice/ice_lib.c
@@ -127,8 +127,14 @@ static void ice_vsi_set_num_desc(struct ice_vsi *vsi)
 	case ICE_VSI_PF:
 	case ICE_VSI_CTRL:
 	case ICE_VSI_LB:
-		vsi->num_rx_desc = ICE_DFLT_NUM_RX_DESC;
-		vsi->num_tx_desc = ICE_DFLT_NUM_TX_DESC;
+		/* a user could change the values of num_[tr]x_desc using
+		 * ethtool -G so we should keep those values instead of
+		 * overwriting them with the defaults.
+		 */
+		if (!vsi->num_rx_desc)
+			vsi->num_rx_desc = ICE_DFLT_NUM_RX_DESC;
+		if (!vsi->num_tx_desc)
+			vsi->num_tx_desc = ICE_DFLT_NUM_TX_DESC;
 		break;
 	default:
 		dev_dbg(ice_pf_to_dev(vsi->back), "Not setting number of Tx/Rx descriptors for VSI type %d\n",
-- 
2.26.2

[net-next 07/15] ice: Add RL profile bit mask check

[Tony Nguyen]

From: Tarun Singh <tarun.k.singh@intel.com>

Mask bits before accessing the profile type field.

Signed-off-by: Tarun Singh <tarun.k.singh@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/ice/ice_sched.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_sched.c b/drivers/net/ethernet/intel/ice/ice_sched.c
index 1c29cfa1cf33..ac5b05bb978f 100644
--- a/drivers/net/ethernet/intel/ice/ice_sched.c
+++ b/drivers/net/ethernet/intel/ice/ice_sched.c
@@ -2153,8 +2153,8 @@ ice_sched_add_rl_profile(struct ice_port_info *pi,
 	hw = pi->hw;
 	list_for_each_entry(rl_prof_elem, &pi->rl_prof_list[layer_num],
 			    list_entry)
-		if (rl_prof_elem->profile.flags == profile_type &&
-		    rl_prof_elem->bw == bw)
+		if ((rl_prof_elem->profile.flags & ICE_AQC_RL_PROFILE_TYPE_M) ==
+		    profile_type && rl_prof_elem->bw == bw)
 			/* Return existing profile ID info */
 			return rl_prof_elem;
 
@@ -2384,7 +2384,8 @@ ice_sched_rm_rl_profile(struct ice_port_info *pi, u8 layer_num, u8 profile_type,
 	/* Check the existing list for RL profile */
 	list_for_each_entry(rl_prof_elem, &pi->rl_prof_list[layer_num],
 			    list_entry)
-		if (rl_prof_elem->profile.flags == profile_type &&
+		if ((rl_prof_elem->profile.flags & ICE_AQC_RL_PROFILE_TYPE_M) ==
+		    profile_type &&
 		    le16_to_cpu(rl_prof_elem->profile.profile_id) ==
 		    profile_id) {
 			if (rl_prof_elem->prof_id_ref)
@@ -2546,8 +2547,8 @@ ice_sched_set_node_bw(struct ice_port_info *pi, struct ice_sched_node *node,
 		return 0;
 
 	return ice_sched_rm_rl_profile(pi, layer_num,
-				       rl_prof_info->profile.flags,
-				       old_id);
+				       rl_prof_info->profile.flags &
+				       ICE_AQC_RL_PROFILE_TYPE_M, old_id);
 }
 
 /**
-- 
2.26.2

[net-next 08/15] ice: Adjust scheduler default BW weight

[Tony Nguyen]

From: Tarun Singh <tarun.k.singh@intel.com>

By default the queues are configured in legacy mode. The default
BW settings for legacy/advanced modes are different. The existing
code was using the advanced mode default value of 1 which was
incorrect. This caused the unbalanced BW sharing among siblings.
The recommended default value is applied.

Signed-off-by: Tarun Singh <tarun.k.singh@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/ice/ice_common.c | 13 ++++++++++++-
 drivers/net/ethernet/intel/ice/ice_type.h   |  2 +-
 2 files changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_common.c b/drivers/net/ethernet/intel/ice/ice_common.c
index fd9534568bf3..35644fe6235a 100644
--- a/drivers/net/ethernet/intel/ice/ice_common.c
+++ b/drivers/net/ethernet/intel/ice/ice_common.c
@@ -3907,7 +3907,18 @@ ice_ena_vsi_txq(struct ice_port_info *pi, u16 vsi_handle, u8 tc, u16 q_handle,
 	 * Without setting the generic section as valid in valid_sections, the
 	 * Admin queue command will fail with error code ICE_AQ_RC_EINVAL.
 	 */
-	buf->txqs[0].info.valid_sections = ICE_AQC_ELEM_VALID_GENERIC;
+	buf->txqs[0].info.valid_sections =
+		ICE_AQC_ELEM_VALID_GENERIC | ICE_AQC_ELEM_VALID_CIR |
+		ICE_AQC_ELEM_VALID_EIR;
+	buf->txqs[0].info.generic = 0;
+	buf->txqs[0].info.cir_bw.bw_profile_idx =
+		cpu_to_le16(ICE_SCHED_DFLT_RL_PROF_ID);
+	buf->txqs[0].info.cir_bw.bw_alloc =
+		cpu_to_le16(ICE_SCHED_DFLT_BW_WT);
+	buf->txqs[0].info.eir_bw.bw_profile_idx =
+		cpu_to_le16(ICE_SCHED_DFLT_RL_PROF_ID);
+	buf->txqs[0].info.eir_bw.bw_alloc =
+		cpu_to_le16(ICE_SCHED_DFLT_BW_WT);
 
 	/* add the LAN queue */
 	status = ice_aq_add_lan_txq(hw, num_qgrps, buf, buf_size, cd);
diff --git a/drivers/net/ethernet/intel/ice/ice_type.h b/drivers/net/ethernet/intel/ice/ice_type.h
index e4349475790f..1eb83d9b0546 100644
--- a/drivers/net/ethernet/intel/ice/ice_type.h
+++ b/drivers/net/ethernet/intel/ice/ice_type.h
@@ -409,7 +409,7 @@ enum ice_rl_type {
 #define ICE_SCHED_DFLT_BW		0xFFFFFFFF	/* unlimited */
 #define ICE_SCHED_DFLT_RL_PROF_ID	0
 #define ICE_SCHED_NO_SHARED_RL_PROF_ID	0xFFFF
-#define ICE_SCHED_DFLT_BW_WT		1
+#define ICE_SCHED_DFLT_BW_WT		4
 #define ICE_SCHED_INVAL_PROF_ID		0xFFFF
 #define ICE_SCHED_DFLT_BURST_SIZE	(15 * 1024)	/* in bytes (15k) */
 
-- 
2.26.2

[net-next 09/15] ice: distribute Tx queues evenly

[Tony Nguyen]

From: Victor Raj <victor.raj@intel.com>

Distribute the Tx queues evenly across all queue groups. This will
help the queues to get more equal sharing among the queues when all
are in use.

In the previous algorithm, the next queue group node will be picked up
only after the previous one filled with max children.
For example: if VSI is configured with 9 queues, the first 8 queues
will be assigned to queue group 1 and the 9th queue will be assigned to
queue group 2.

The 2 queue groups split the bandwidth between them equally (50:50).
The first queue group node will share the 50% bandwidth with all of
its children (8 queues). And the second queue group node will share
the entire 50% bandwidth with its only children.

The new algorithm will fix this issue.

Signed-off-by: Victor Raj <victor.raj@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/ice/ice_sched.c | 55 ++++++++++++++++++++--
 1 file changed, 51 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_sched.c b/drivers/net/ethernet/intel/ice/ice_sched.c
index ac5b05bb978f..355f727563e4 100644
--- a/drivers/net/ethernet/intel/ice/ice_sched.c
+++ b/drivers/net/ethernet/intel/ice/ice_sched.c
@@ -1275,6 +1275,53 @@ ice_sched_find_node_in_subtree(struct ice_hw *hw, struct ice_sched_node *base,
 	return false;
 }
 
+/**
+ * ice_sched_get_free_qgrp - Scan all queue group siblings and find a free node
+ * @pi: port information structure
+ * @vsi_node: software VSI handle
+ * @qgrp_node: first queue group node identified for scanning
+ * @owner: LAN or RDMA
+ *
+ * This function retrieves a free LAN or RDMA queue group node by scanning
+ * qgrp_node and its siblings for the queue group with the fewest number
+ * of queues currently assigned.
+ */
+static struct ice_sched_node *
+ice_sched_get_free_qgrp(struct ice_port_info *pi,
+			struct ice_sched_node *vsi_node,
+			struct ice_sched_node *qgrp_node, u8 owner)
+{
+	struct ice_sched_node *min_qgrp;
+	u8 min_children;
+
+	if (!qgrp_node)
+		return qgrp_node;
+	min_children = qgrp_node->num_children;
+	if (!min_children)
+		return qgrp_node;
+	min_qgrp = qgrp_node;
+	/* scan all queue groups until find a node which has less than the
+	 * minimum number of children. This way all queue group nodes get
+	 * equal number of shares and active. The bandwidth will be equally
+	 * distributed across all queues.
+	 */
+	while (qgrp_node) {
+		/* make sure the qgroup node is part of the VSI subtree */
+		if (ice_sched_find_node_in_subtree(pi->hw, vsi_node, qgrp_node))
+			if (qgrp_node->num_children < min_children &&
+			    qgrp_node->owner == owner) {
+				/* replace the new min queue group node */
+				min_qgrp = qgrp_node;
+				min_children = min_qgrp->num_children;
+				/* break if it has no children, */
+				if (!min_children)
+					break;
+			}
+		qgrp_node = qgrp_node->sibling;
+	}
+	return min_qgrp;
+}
+
 /**
  * ice_sched_get_free_qparent - Get a free LAN or RDMA queue group node
  * @pi: port information structure
@@ -1288,7 +1335,7 @@ struct ice_sched_node *
 ice_sched_get_free_qparent(struct ice_port_info *pi, u16 vsi_handle, u8 tc,
 			   u8 owner)
 {
-	struct ice_sched_node *vsi_node, *qgrp_node = NULL;
+	struct ice_sched_node *vsi_node, *qgrp_node;
 	struct ice_vsi_ctx *vsi_ctx;
 	u16 max_children;
 	u8 qgrp_layer;
@@ -1302,7 +1349,7 @@ ice_sched_get_free_qparent(struct ice_port_info *pi, u16 vsi_handle, u8 tc,
 	vsi_node = vsi_ctx->sched.vsi_node[tc];
 	/* validate invalid VSI ID */
 	if (!vsi_node)
-		goto lan_q_exit;
+		return NULL;
 
 	/* get the first queue group node from VSI sub-tree */
 	qgrp_node = ice_sched_get_first_node(pi, vsi_node, qgrp_layer);
@@ -1315,8 +1362,8 @@ ice_sched_get_free_qparent(struct ice_port_info *pi, u16 vsi_handle, u8 tc,
 		qgrp_node = qgrp_node->sibling;
 	}
 
-lan_q_exit:
-	return qgrp_node;
+	/* Select the best queue group */
+	return ice_sched_get_free_qgrp(pi, vsi_node, qgrp_node, owner);
 }
 
 /**
-- 
2.26.2

[net-next 10/15] ice: need_wakeup flag might not be set for Tx

[Tony Nguyen]

From: Krzysztof Kazimierczak <krzysztof.kazimierczak@intel.com>

This is a port of i40e commit 705639572e8c ("i40e: need_wakeup flag might
not be set for Tx").

Quoting the original commit message:

"The need_wakeup flag for Tx might not be set for AF_XDP sockets that
are only used to send packets. This happens if there is at least one
outstanding packet that has not been completed by the hardware and we
get that corresponding completion (which will not generate an interrupt
since interrupts are disabled in the napi poll loop) between the time we
stopped processing the Tx completions and interrupts are enabled again.
In this case, the need_wakeup flag will have been cleared at the end of
the Tx completion processing as we believe we will get an interrupt from
the outstanding completion at a later point in time. But if this
completion interrupt occurs before interrupts are enable, we lose it and
should at that point really have set the need_wakeup flag since there
are no more outstanding completions that can generate an interrupt to
continue the processing. When this happens, user space will see a Tx
queue need_wakeup of 0 and skip issuing a syscall, which means will
never get into the Tx processing again and we have a deadlock."

As a result, packet processing stops. This patch introduces a fix for
this issue, by always setting the need_wakeup flag at the end of an
interrupt processing. This ensures that the deadlock will not happen.

Signed-off-by: Krzysztof Kazimierczak <krzysztof.kazimierczak@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/ice/ice_xsk.c | 10 ++--------
 1 file changed, 2 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_xsk.c b/drivers/net/ethernet/intel/ice/ice_xsk.c
index 6badfd62dc63..87862918bc7a 100644
--- a/drivers/net/ethernet/intel/ice/ice_xsk.c
+++ b/drivers/net/ethernet/intel/ice/ice_xsk.c
@@ -706,8 +706,6 @@ static bool ice_xmit_zc(struct ice_ring *xdp_ring, int budget)
 	if (tx_desc) {
 		ice_xdp_ring_update_tail(xdp_ring);
 		xsk_umem_consume_tx_done(xdp_ring->xsk_umem);
-		if (xsk_umem_uses_need_wakeup(xdp_ring->xsk_umem))
-			xsk_clear_tx_need_wakeup(xdp_ring->xsk_umem);
 	}
 
 	return budget > 0 && work_done;
@@ -783,12 +781,8 @@ bool ice_clean_tx_irq_zc(struct ice_ring *xdp_ring, int budget)
 	if (xsk_frames)
 		xsk_umem_complete_tx(xdp_ring->xsk_umem, xsk_frames);
 
-	if (xsk_umem_uses_need_wakeup(xdp_ring->xsk_umem)) {
-		if (xdp_ring->next_to_clean == xdp_ring->next_to_use)
-			xsk_set_tx_need_wakeup(xdp_ring->xsk_umem);
-		else
-			xsk_clear_tx_need_wakeup(xdp_ring->xsk_umem);
-	}
+	if (xsk_umem_uses_need_wakeup(xdp_ring->xsk_umem))
+		xsk_set_tx_need_wakeup(xdp_ring->xsk_umem);
 
 	ice_update_tx_ring_stats(xdp_ring, total_packets, total_bytes);
 	xmit_done = ice_xmit_zc(xdp_ring, ICE_DFLT_IRQ_WORK);
-- 
2.26.2

[net-next 11/15] ice: Allow all VLANs in safe mode

[Tony Nguyen]

From: Brett Creeley <brett.creeley@intel.com>

Currently the PF VSI's context parameters are left in a bad state when
going into safe mode. This is causing VLAN traffic to not pass. Fix this
by configuring the PF VSI to allow all VLAN tagged traffic.

Also, remove redundant comment explaining the safe mode flow in
ice_probe().

Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/ice/ice_main.c | 59 ++++++++++++++++++++++-
 1 file changed, 57 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index 9b9e30a7d690..a68371fc0a75 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -3583,6 +3583,60 @@ int ice_vsi_recfg_qs(struct ice_vsi *vsi, int new_rx, int new_tx)
 	return err;
 }
 
+/**
+ * ice_set_safe_mode_vlan_cfg - configure PF VSI to allow all VLANs in safe mode
+ * @pf: PF to configure
+ *
+ * No VLAN offloads/filtering are advertised in safe mode so make sure the PF
+ * VSI can still Tx/Rx VLAN tagged packets.
+ */
+static void ice_set_safe_mode_vlan_cfg(struct ice_pf *pf)
+{
+	struct ice_vsi *vsi = ice_get_main_vsi(pf);
+	struct ice_vsi_ctx *ctxt;
+	enum ice_status status;
+	struct ice_hw *hw;
+
+	if (!vsi)
+		return;
+
+	ctxt = kzalloc(sizeof(*ctxt), GFP_KERNEL);
+	if (!ctxt)
+		return;
+
+	hw = &pf->hw;
+	ctxt->info = vsi->info;
+
+	ctxt->info.valid_sections =
+		cpu_to_le16(ICE_AQ_VSI_PROP_VLAN_VALID |
+			    ICE_AQ_VSI_PROP_SECURITY_VALID |
+			    ICE_AQ_VSI_PROP_SW_VALID);
+
+	/* disable VLAN anti-spoof */
+	ctxt->info.sec_flags &= ~(ICE_AQ_VSI_SEC_TX_VLAN_PRUNE_ENA <<
+				  ICE_AQ_VSI_SEC_TX_PRUNE_ENA_S);
+
+	/* disable VLAN pruning and keep all other settings */
+	ctxt->info.sw_flags2 &= ~ICE_AQ_VSI_SW_FLAG_RX_VLAN_PRUNE_ENA;
+
+	/* allow all VLANs on Tx and don't strip on Rx */
+	ctxt->info.vlan_flags = ICE_AQ_VSI_VLAN_MODE_ALL |
+		ICE_AQ_VSI_VLAN_EMOD_NOTHING;
+
+	status = ice_update_vsi(hw, vsi->idx, ctxt, NULL);
+	if (status) {
+		dev_err(ice_pf_to_dev(vsi->back), "Failed to update VSI for safe mode VLANs, err %s aq_err %s\n",
+			ice_stat_str(status),
+			ice_aq_str(hw->adminq.sq_last_status));
+	} else {
+		vsi->info.sec_flags = ctxt->info.sec_flags;
+		vsi->info.sw_flags2 = ctxt->info.sw_flags2;
+		vsi->info.vlan_flags = ctxt->info.vlan_flags;
+	}
+
+	kfree(ctxt);
+}
+
 /**
  * ice_log_pkg_init - log result of DDP package load
  * @hw: pointer to hardware info
@@ -4139,9 +4193,10 @@ ice_probe(struct pci_dev *pdev, const struct pci_device_id __always_unused *ent)
 	/* Disable WoL at init, wait for user to enable */
 	device_set_wakeup_enable(dev, false);
 
-	/* If no DDP driven features have to be setup, we are done with probe */
-	if (ice_is_safe_mode(pf))
+	if (ice_is_safe_mode(pf)) {
+		ice_set_safe_mode_vlan_cfg(pf);
 		goto probe_done;
+	}
 
 	/* initialize DDP driven features */
 
-- 
2.26.2

[net-next 12/15] ice: cleanup VSI on probe fail

[Tony Nguyen]

From: Marcin Szycik <marcin.szycik@intel.com>

As part of ice_setup_pf_sw() a PF VSI is setup; release the VSI in case of
failure.

Signed-off-by: Marcin Szycik <marcin.szycik@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/ice/ice_main.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
index a68371fc0a75..c0bde24ab344 100644
--- a/drivers/net/ethernet/intel/ice/ice_main.c
+++ b/drivers/net/ethernet/intel/ice/ice_main.c
@@ -4134,7 +4134,7 @@ ice_probe(struct pci_dev *pdev, const struct pci_device_id __always_unused *ent)
 	if (err) {
 		dev_err(dev, "probe failed sending driver version %s. error: %d\n",
 			UTS_RELEASE, err);
-		goto err_alloc_sw_unroll;
+		goto err_send_version_unroll;
 	}
 
 	/* since everything is good, start the service timer */
@@ -4143,19 +4143,19 @@ ice_probe(struct pci_dev *pdev, const struct pci_device_id __always_unused *ent)
 	err = ice_init_link_events(pf->hw.port_info);
 	if (err) {
 		dev_err(dev, "ice_init_link_events failed: %d\n", err);
-		goto err_alloc_sw_unroll;
+		goto err_send_version_unroll;
 	}
 
 	err = ice_init_nvm_phy_type(pf->hw.port_info);
 	if (err) {
 		dev_err(dev, "ice_init_nvm_phy_type failed: %d\n", err);
-		goto err_alloc_sw_unroll;
+		goto err_send_version_unroll;
 	}
 
 	err = ice_update_link_info(pf->hw.port_info);
 	if (err) {
 		dev_err(dev, "ice_update_link_info failed: %d\n", err);
-		goto err_alloc_sw_unroll;
+		goto err_send_version_unroll;
 	}
 
 	ice_init_link_dflt_override(pf->hw.port_info);
@@ -4166,7 +4166,7 @@ ice_probe(struct pci_dev *pdev, const struct pci_device_id __always_unused *ent)
 		err = ice_init_phy_user_cfg(pf->hw.port_info);
 		if (err) {
 			dev_err(dev, "ice_init_phy_user_cfg failed: %d\n", err);
-			goto err_alloc_sw_unroll;
+			goto err_send_version_unroll;
 		}
 
 		if (!test_bit(ICE_FLAG_LINK_DOWN_ON_CLOSE_ENA, pf->flags)) {
@@ -4220,6 +4220,8 @@ ice_probe(struct pci_dev *pdev, const struct pci_device_id __always_unused *ent)
 	clear_bit(__ICE_DOWN, pf->state);
 	return 0;
 
+err_send_version_unroll:
+	ice_vsi_release_all(pf);
 err_alloc_sw_unroll:
 	ice_devlink_destroy_port(pf);
 	set_bit(__ICE_SERVICE_DIS, pf->state);
-- 
2.26.2

[net-next 13/15] ice: reduce scope of variable

[Tony Nguyen]

From: Bruce Allan <bruce.w.allan@intel.com>

The scope of the macro local variable 'i' can be reduced.  Do so to avoid
static analysis tools from complaining.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/ice/ice_controlq.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_controlq.c b/drivers/net/ethernet/intel/ice/ice_controlq.c
index 1e18021aa073..1f46a7828be8 100644
--- a/drivers/net/ethernet/intel/ice/ice_controlq.c
+++ b/drivers/net/ethernet/intel/ice/ice_controlq.c
@@ -312,9 +312,10 @@ ice_cfg_rq_regs(struct ice_hw *hw, struct ice_ctl_q_info *cq)
 
 #define ICE_FREE_CQ_BUFS(hw, qi, ring)					\
 do {									\
-	int i;								\
 	/* free descriptors */						\
-	if ((qi)->ring.r.ring##_bi)					\
+	if ((qi)->ring.r.ring##_bi) {					\
+		int i;							\
+									\
 		for (i = 0; i < (qi)->num_##ring##_entries; i++)	\
 			if ((qi)->ring.r.ring##_bi[i].pa) {		\
 				dmam_free_coherent(ice_hw_to_dev(hw),	\
@@ -325,6 +326,7 @@ do {									\
 					(qi)->ring.r.ring##_bi[i].pa = 0;\
 					(qi)->ring.r.ring##_bi[i].size = 0;\
 		}							\
+	}								\
 	/* free the buffer info list */					\
 	if ((qi)->ring.cmd_buf)						\
 		devm_kfree(ice_hw_to_dev(hw), (qi)->ring.cmd_buf);	\
-- 
2.26.2

[net-next 14/15] ice: disable no longer needed workaround for FW logging

[Tony Nguyen]

From: Ben Shelton <benjamin.h.shelton@intel.com>

For the FW logging info AQ command, we currently set the ICE_AQ_FLAG_RD
in order to work around a FW issue. This issue has been fixed so remove the
workaround.

Signed-off-by: Ben Shelton <benjamin.h.shelton@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/ice/ice_common.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_common.c b/drivers/net/ethernet/intel/ice/ice_common.c
index 35644fe6235a..ad5941ec7b11 100644
--- a/drivers/net/ethernet/intel/ice/ice_common.c
+++ b/drivers/net/ethernet/intel/ice/ice_common.c
@@ -611,8 +611,6 @@ static enum ice_status ice_get_fw_log_cfg(struct ice_hw *hw)
 
 	ice_fill_dflt_direct_cmd_desc(&desc, ice_aqc_opc_fw_logging_info);
 
-	desc.flags |= cpu_to_le16(ICE_AQ_FLAG_RD);
-
 	status = ice_aq_send_cmd(hw, &desc, config, size, NULL);
 	if (!status) {
 		u16 i;
-- 
2.26.2

[net-next 15/15] ice: fix unused parameter warning

[Tony Nguyen]

Depending on PAGE_SIZE, the following unused parameter warning can be
reported:

drivers/net/ethernet/intel/ice/ice_txrx.c: In function ‘ice_rx_frame_truesize’:
drivers/net/ethernet/intel/ice/ice_txrx.c:513:21: warning: unused parameter ‘size’ [-Wunused-parameter]
        unsigned int size)

The 'size' variable is used only when PAGE_SIZE >= 8192. Add __maybe_unused
to remove the warning.

Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
---
 drivers/net/ethernet/intel/ice/ice_txrx.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_txrx.c b/drivers/net/ethernet/intel/ice/ice_txrx.c
index abdb137c8bb7..a508d4f463e9 100644
--- a/drivers/net/ethernet/intel/ice/ice_txrx.c
+++ b/drivers/net/ethernet/intel/ice/ice_txrx.c
@@ -509,8 +509,8 @@ static unsigned int ice_rx_offset(struct ice_ring *rx_ring)
 	return 0;
 }
 
-static unsigned int ice_rx_frame_truesize(struct ice_ring *rx_ring,
-					  unsigned int size)
+static unsigned int
+ice_rx_frame_truesize(struct ice_ring *rx_ring, unsigned int __maybe_unused size)
 {
 	unsigned int truesize;
 
-- 
2.26.2

RE: [net-next 05/15] ice: return correct error code from ice_aq_sw_rules

[Patil, Kiran]

ACK

-----Original Message-----
From: Nguyen, Anthony L <anthony.l.nguyen@intel.com> 
Sent: Wednesday, July 29, 2020 9:24 AM
To: davem@davemloft.net
Cc: Patil, Kiran <kiran.patil@intel.com>; netdev@vger.kernel.org; nhorman@redhat.com; sassmann@redhat.com; Kirsher, Jeffrey T <jeffrey.t.kirsher@intel.com>; Nguyen, Anthony L <anthony.l.nguyen@intel.com>; Bowers, AndrewX <andrewx.bowers@intel.com>
Subject: [net-next 05/15] ice: return correct error code from ice_aq_sw_rules

From: Kiran Patil <kiran.patil@intel.com>

Return ICE_ERR_DOES_NOT_EXIST return code if admin command error code is ICE_AQ_RC_ENOENT (not exist). ice_aq_sw_rules is used when switch rule is getting added/deleted/updated. In case of delete/update switch rule, admin command can return ICE_AQ_RC_ENOENT error code if such rule does not exist, hence return ICE_ERR_DOES_NOT_EXIST error code from ice_aq_sw_rule, so that caller of this function can decide how to handle ICE_ERR_DOES_NOT_EXIST.

Signed-off-by: Kiran Patil <kiran.patil@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
---
 drivers/net/ethernet/intel/ice/ice_switch.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/ice/ice_switch.c b/drivers/net/ethernet/intel/ice/ice_switch.c
index ccbe1cc64295..c3a6c41385ee 100644
--- a/drivers/net/ethernet/intel/ice/ice_switch.c
+++ b/drivers/net/ethernet/intel/ice/ice_switch.c
@@ -495,6 +495,7 @@ ice_aq_sw_rules(struct ice_hw *hw, void *rule_list, u16 rule_list_sz,
 		u8 num_rules, enum ice_adminq_opc opc, struct ice_sq_cd *cd)  {
 	struct ice_aq_desc desc;
+	enum ice_status status;
 
 	if (opc != ice_aqc_opc_add_sw_rules &&
 	    opc != ice_aqc_opc_update_sw_rules && @@ -506,7 +507,12 @@ ice_aq_sw_rules(struct ice_hw *hw, void *rule_list, u16 rule_list_sz,
 	desc.flags |= cpu_to_le16(ICE_AQ_FLAG_RD);
 	desc.params.sw_rules.num_rules_fltr_entry_index =
 		cpu_to_le16(num_rules);
-	return ice_aq_send_cmd(hw, &desc, rule_list, rule_list_sz, cd);
+	status = ice_aq_send_cmd(hw, &desc, rule_list, rule_list_sz, cd);
+	if (opc != ice_aqc_opc_add_sw_rules &&
+	    hw->adminq.sq_last_status == ICE_AQ_RC_ENOENT)
+		status = ICE_ERR_DOES_NOT_EXIST;
+
+	return status;
 }
 
 /* ice_init_port_info - Initialize port_info with switch configuration data
--
2.26.2

RE: [net-next 11/15] ice: Allow all VLANs in safe mode

[Creeley, Brett]

ACK.

Thanks,

Brett

> -----Original Message-----
> From: Nguyen, Anthony L <anthony.l.nguyen@intel.com>
> Sent: Wednesday, July 29, 2020 9:24 AM
> To: davem@davemloft.net
> Cc: Creeley, Brett <brett.creeley@intel.com>; netdev@vger.kernel.org; nhorman@redhat.com; sassmann@redhat.com; Kirsher,
> Jeffrey T <jeffrey.t.kirsher@intel.com>; Nguyen, Anthony L <anthony.l.nguyen@intel.com>; Bowers, AndrewX
> <andrewx.bowers@intel.com>
> Subject: [net-next 11/15] ice: Allow all VLANs in safe mode
> 
> From: Brett Creeley <brett.creeley@intel.com>
> 
> Currently the PF VSI's context parameters are left in a bad state when
> going into safe mode. This is causing VLAN traffic to not pass. Fix this
> by configuring the PF VSI to allow all VLAN tagged traffic.
> 
> Also, remove redundant comment explaining the safe mode flow in
> ice_probe().
> 
> Signed-off-by: Brett Creeley <brett.creeley@intel.com>
> Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
> ---
>  drivers/net/ethernet/intel/ice/ice_main.c | 59 ++++++++++++++++++++++-
>  1 file changed, 57 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c
> index 9b9e30a7d690..a68371fc0a75 100644
> --- a/drivers/net/ethernet/intel/ice/ice_main.c
> +++ b/drivers/net/ethernet/intel/ice/ice_main.c
> @@ -3583,6 +3583,60 @@ int ice_vsi_recfg_qs(struct ice_vsi *vsi, int new_rx, int new_tx)
>  	return err;
>  }
> 
> +/**
> + * ice_set_safe_mode_vlan_cfg - configure PF VSI to allow all VLANs in safe mode
> + * @pf: PF to configure
> + *
> + * No VLAN offloads/filtering are advertised in safe mode so make sure the PF
> + * VSI can still Tx/Rx VLAN tagged packets.
> + */
> +static void ice_set_safe_mode_vlan_cfg(struct ice_pf *pf)
> +{
> +	struct ice_vsi *vsi = ice_get_main_vsi(pf);
> +	struct ice_vsi_ctx *ctxt;
> +	enum ice_status status;
> +	struct ice_hw *hw;
> +
> +	if (!vsi)
> +		return;
> +
> +	ctxt = kzalloc(sizeof(*ctxt), GFP_KERNEL);
> +	if (!ctxt)
> +		return;
> +
> +	hw = &pf->hw;
> +	ctxt->info = vsi->info;
> +
> +	ctxt->info.valid_sections =
> +		cpu_to_le16(ICE_AQ_VSI_PROP_VLAN_VALID |
> +			    ICE_AQ_VSI_PROP_SECURITY_VALID |
> +			    ICE_AQ_VSI_PROP_SW_VALID);
> +
> +	/* disable VLAN anti-spoof */
> +	ctxt->info.sec_flags &= ~(ICE_AQ_VSI_SEC_TX_VLAN_PRUNE_ENA <<
> +				  ICE_AQ_VSI_SEC_TX_PRUNE_ENA_S);
> +
> +	/* disable VLAN pruning and keep all other settings */
> +	ctxt->info.sw_flags2 &= ~ICE_AQ_VSI_SW_FLAG_RX_VLAN_PRUNE_ENA;
> +
> +	/* allow all VLANs on Tx and don't strip on Rx */
> +	ctxt->info.vlan_flags = ICE_AQ_VSI_VLAN_MODE_ALL |
> +		ICE_AQ_VSI_VLAN_EMOD_NOTHING;
> +
> +	status = ice_update_vsi(hw, vsi->idx, ctxt, NULL);
> +	if (status) {
> +		dev_err(ice_pf_to_dev(vsi->back), "Failed to update VSI for safe mode VLANs, err %s aq_err %s\n",
> +			ice_stat_str(status),
> +			ice_aq_str(hw->adminq.sq_last_status));
> +	} else {
> +		vsi->info.sec_flags = ctxt->info.sec_flags;
> +		vsi->info.sw_flags2 = ctxt->info.sw_flags2;
> +		vsi->info.vlan_flags = ctxt->info.vlan_flags;
> +	}
> +
> +	kfree(ctxt);
> +}
> +
>  /**
>   * ice_log_pkg_init - log result of DDP package load
>   * @hw: pointer to hardware info
> @@ -4139,9 +4193,10 @@ ice_probe(struct pci_dev *pdev, const struct pci_device_id __always_unused *ent)
>  	/* Disable WoL at init, wait for user to enable */
>  	device_set_wakeup_enable(dev, false);
> 
> -	/* If no DDP driven features have to be setup, we are done with probe */
> -	if (ice_is_safe_mode(pf))
> +	if (ice_is_safe_mode(pf)) {
> +		ice_set_safe_mode_vlan_cfg(pf);
>  		goto probe_done;
> +	}
> 
>  	/* initialize DDP driven features */
> 
> --
> 2.26.2

Re: [net-next 00/15][pull request] 100GbE Intel Wired LAN Driver Updates 2020-07-29

[David Miller]

From: Tony Nguyen <anthony.l.nguyen@intel.com>
Date: Wed, 29 Jul 2020 09:23:50 -0700

> This series contains updates to the ice driver only.
 ...
> The following are changes since commit 490ed0b908d371cd9ab63fc142213e5d02d810ee:
>   Merge branch 'net-stmmac-improve-WOL'
> and are available in the git repository at:
>   git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue 100GbE

Pulled, thank you.