* [PATCH] dt-bindings: Fix SPI and I2C bus node names in examples
@ 2023-02-28 21:54 Rob Herring
2023-02-28 21:58 ` Mark Brown
` (9 more replies)
0 siblings, 10 replies; 11+ messages in thread
From: Rob Herring @ 2023-02-28 21:54 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: devicetree, Miguel Ojeda, Benson Leung, Guenter Roeck,
Stephen Boyd, Andrzej Hajda, Neil Armstrong, Robert Foss,
Thierry Reding, Sam Ravnborg, MyungJoo Ham, Chanwoo Choi,
Linus Walleij, Bartosz Golaszewski, Pavel Machek, Lee Jones,
Mauro Carvalho Chehab, David S. Miller, Eric Dumazet,
Jakub Kicinski, Paolo Abeni, Wolfgang Grandegger, Kalle Valo,
Sebastian Reichel, Mark Brown, Greg Kroah-Hartman, linux-clk,
dri-devel, linux-gpio, linux-i2c, linux-leds, linux-media,
netdev, linux-can, linux-wireless, linux-pm, alsa-devel,
linux-usb
SPI and I2C bus node names are expected to be "spi" or "i2c",
respectively, with nothing else, a unit-address, or a '-N' index. A
pattern of 'spi0' or 'i2c0' or similar has crept in. Fix all these
cases. Mostly scripted with the following commands:
git grep -l '\si2c[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/i2c[0-9] {/i2c {/'
git grep -l '\sspi[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/spi[0-9] {/spi {/'
With this, a few errors in examples were exposed and fixed.
Signed-off-by: Rob Herring <robh@kernel.org>
---
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Benson Leung <bleung@chromium.org>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Robert Foss <rfoss@kernel.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: MyungJoo Ham <myungjoo.ham@samsung.com>
Cc: Chanwoo Choi <cw00.choi@samsung.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Lee Jones <lee@kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-clk@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-gpio@vger.kernel.org
Cc: linux-i2c@vger.kernel.org
Cc: linux-leds@vger.kernel.org
Cc: linux-media@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-can@vger.kernel.org
Cc: linux-wireless@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Cc: linux-usb@vger.kernel.org
---
.../bindings/auxdisplay/holtek,ht16k33.yaml | 2 +-
.../bindings/chrome/google,cros-ec-typec.yaml | 2 +-
.../chrome/google,cros-kbd-led-backlight.yaml | 2 +-
.../devicetree/bindings/clock/ti,lmk04832.yaml | 2 +-
.../bindings/display/bridge/analogix,anx7625.yaml | 2 +-
.../bindings/display/bridge/anx6345.yaml | 2 +-
.../bindings/display/bridge/lontium,lt8912b.yaml | 2 +-
.../bindings/display/bridge/nxp,ptn3460.yaml | 2 +-
.../bindings/display/bridge/ps8640.yaml | 2 +-
.../bindings/display/bridge/sil,sii9234.yaml | 2 +-
.../bindings/display/bridge/ti,dlpc3433.yaml | 2 +-
.../bindings/display/bridge/toshiba,tc358762.yaml | 2 +-
.../bindings/display/bridge/toshiba,tc358768.yaml | 2 +-
.../bindings/display/panel/nec,nl8048hl11.yaml | 2 +-
.../bindings/display/solomon,ssd1307fb.yaml | 4 ++--
.../devicetree/bindings/eeprom/at25.yaml | 2 +-
.../bindings/extcon/extcon-usbc-cros-ec.yaml | 2 +-
.../bindings/extcon/extcon-usbc-tusb320.yaml | 2 +-
.../devicetree/bindings/gpio/gpio-pca9570.yaml | 2 +-
.../devicetree/bindings/gpio/gpio-pca95xx.yaml | 8 ++++----
.../bindings/i2c/google,cros-ec-i2c-tunnel.yaml | 2 +-
.../bindings/leds/cznic,turris-omnia-leds.yaml | 2 +-
.../devicetree/bindings/leds/issi,is31fl319x.yaml | 2 +-
.../devicetree/bindings/leds/leds-aw2013.yaml | 2 +-
.../devicetree/bindings/leds/leds-rt4505.yaml | 2 +-
.../devicetree/bindings/leds/ti,tca6507.yaml | 2 +-
.../bindings/media/i2c/aptina,mt9p031.yaml | 2 +-
.../bindings/media/i2c/aptina,mt9v111.yaml | 2 +-
.../devicetree/bindings/media/i2c/imx219.yaml | 2 +-
.../devicetree/bindings/media/i2c/imx258.yaml | 4 ++--
.../devicetree/bindings/media/i2c/mipi-ccs.yaml | 2 +-
.../bindings/media/i2c/ovti,ov5648.yaml | 2 +-
.../bindings/media/i2c/ovti,ov772x.yaml | 2 +-
.../bindings/media/i2c/ovti,ov8865.yaml | 2 +-
.../bindings/media/i2c/ovti,ov9282.yaml | 2 +-
.../bindings/media/i2c/rda,rda5807.yaml | 2 +-
.../bindings/media/i2c/sony,imx214.yaml | 2 +-
.../bindings/media/i2c/sony,imx274.yaml | 2 +-
.../bindings/media/i2c/sony,imx334.yaml | 2 +-
.../bindings/media/i2c/sony,imx335.yaml | 2 +-
.../bindings/media/i2c/sony,imx412.yaml | 2 +-
.../devicetree/bindings/mfd/actions,atc260x.yaml | 2 +-
.../devicetree/bindings/mfd/google,cros-ec.yaml | 6 +++---
.../devicetree/bindings/mfd/ti,tps65086.yaml | 2 +-
.../devicetree/bindings/mfd/x-powers,axp152.yaml | 4 ++--
.../devicetree/bindings/net/asix,ax88796c.yaml | 2 +-
.../bindings/net/can/microchip,mcp251xfd.yaml | 2 +-
.../bindings/net/dsa/microchip,ksz.yaml | 2 +-
.../bindings/net/nfc/samsung,s3fwrn5.yaml | 2 +-
.../bindings/net/vertexcom-mse102x.yaml | 2 +-
.../bindings/net/wireless/ti,wlcore.yaml | 10 ++++++++--
.../devicetree/bindings/pinctrl/pinmux-node.yaml | 2 +-
.../bindings/pinctrl/starfive,jh7100-pinctrl.yaml | 2 +-
.../devicetree/bindings/power/supply/bq2415x.yaml | 2 +-
.../devicetree/bindings/power/supply/bq24190.yaml | 2 +-
.../devicetree/bindings/power/supply/bq24257.yaml | 4 ++--
.../devicetree/bindings/power/supply/bq24735.yaml | 2 +-
.../devicetree/bindings/power/supply/bq2515x.yaml | 2 +-
.../devicetree/bindings/power/supply/bq25890.yaml | 2 +-
.../devicetree/bindings/power/supply/bq25980.yaml | 2 +-
.../devicetree/bindings/power/supply/bq27xxx.yaml | 15 ++++++++-------
.../bindings/power/supply/lltc,ltc294x.yaml | 2 +-
.../bindings/power/supply/ltc4162-l.yaml | 2 +-
.../bindings/power/supply/maxim,max14656.yaml | 2 +-
.../bindings/power/supply/maxim,max17040.yaml | 4 ++--
.../bindings/power/supply/maxim,max17042.yaml | 2 +-
.../bindings/power/supply/richtek,rt9455.yaml | 2 +-
.../bindings/power/supply/ti,lp8727.yaml | 2 +-
.../bindings/regulator/active-semi,act8865.yaml | 2 +-
.../regulator/google,cros-ec-regulator.yaml | 2 +-
.../bindings/regulator/nxp,pf8x00-regulator.yaml | 2 +-
.../devicetree/bindings/sound/everest,es8316.yaml | 2 +-
.../devicetree/bindings/sound/tas2562.yaml | 2 +-
.../devicetree/bindings/sound/tas2770.yaml | 2 +-
.../devicetree/bindings/sound/tas27xx.yaml | 2 +-
.../devicetree/bindings/sound/tas5805m.yaml | 2 +-
.../devicetree/bindings/sound/tlv320adcx140.yaml | 2 +-
.../devicetree/bindings/sound/zl38060.yaml | 2 +-
.../devicetree/bindings/usb/maxim,max33359.yaml | 2 +-
.../bindings/usb/maxim,max3420-udc.yaml | 2 +-
.../bindings/usb/mediatek,mt6360-tcpc.yaml | 2 +-
.../devicetree/bindings/usb/richtek,rt1711h.yaml | 2 +-
.../devicetree/bindings/usb/richtek,rt1719.yaml | 2 +-
.../devicetree/bindings/usb/st,stusb160x.yaml | 2 +-
.../devicetree/bindings/usb/ti,hd3ss3220.yaml | 2 +-
.../devicetree/bindings/usb/ti,tps6598x.yaml | 2 +-
86 files changed, 110 insertions(+), 103 deletions(-)
diff --git a/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml b/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
index fc4873deb76f..286e726cd052 100644
--- a/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
+++ b/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
@@ -72,7 +72,7 @@ examples:
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
- i2c1 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml b/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml
index defcf1e12aa1..3b0548c34791 100644
--- a/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml
+++ b/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml
@@ -41,7 +41,7 @@ additionalProperties: false
examples:
- |+
- spi0 {
+ spi {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/chrome/google,cros-kbd-led-backlight.yaml b/Documentation/devicetree/bindings/chrome/google,cros-kbd-led-backlight.yaml
index 40244d003c32..c94ab8f9e0b8 100644
--- a/Documentation/devicetree/bindings/chrome/google,cros-kbd-led-backlight.yaml
+++ b/Documentation/devicetree/bindings/chrome/google,cros-kbd-led-backlight.yaml
@@ -20,7 +20,7 @@ additionalProperties: false
examples:
- |
- spi0 {
+ spi {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/clock/ti,lmk04832.yaml b/Documentation/devicetree/bindings/clock/ti,lmk04832.yaml
index 73d17830f165..13d7b3d03d84 100644
--- a/Documentation/devicetree/bindings/clock/ti,lmk04832.yaml
+++ b/Documentation/devicetree/bindings/clock/ti,lmk04832.yaml
@@ -160,7 +160,7 @@ examples:
};
};
- spi0 {
+ spi {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
index 4590186c4a0b..27026c78cd9b 100644
--- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
@@ -134,7 +134,7 @@ examples:
- |
#include <dt-bindings/gpio/gpio.h>
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/display/bridge/anx6345.yaml b/Documentation/devicetree/bindings/display/bridge/anx6345.yaml
index 9bf2cbcea69f..514f58852990 100644
--- a/Documentation/devicetree/bindings/display/bridge/anx6345.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/anx6345.yaml
@@ -61,7 +61,7 @@ additionalProperties: false
examples:
- |
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml b/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml
index 674891ee2f8e..f201ae4af4fb 100644
--- a/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/lontium,lt8912b.yaml
@@ -67,7 +67,7 @@ examples:
- |
#include <dt-bindings/gpio/gpio.h>
- i2c4 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml b/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml
index 107dd138e6c6..0f61291d4268 100644
--- a/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml
@@ -71,7 +71,7 @@ examples:
- |
#include <dt-bindings/gpio/gpio.h>
- i2c1 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/display/bridge/ps8640.yaml b/Documentation/devicetree/bindings/display/bridge/ps8640.yaml
index 28811aff2c5a..5856450c5da7 100644
--- a/Documentation/devicetree/bindings/display/bridge/ps8640.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/ps8640.yaml
@@ -73,7 +73,7 @@ additionalProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/display/bridge/sil,sii9234.yaml b/Documentation/devicetree/bindings/display/bridge/sil,sii9234.yaml
index f88ddfe4818b..176181d25530 100644
--- a/Documentation/devicetree/bindings/display/bridge/sil,sii9234.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/sil,sii9234.yaml
@@ -71,7 +71,7 @@ examples:
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
- i2c1 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/display/bridge/ti,dlpc3433.yaml b/Documentation/devicetree/bindings/display/bridge/ti,dlpc3433.yaml
index 542193d77cdf..d3f84d220723 100644
--- a/Documentation/devicetree/bindings/display/bridge/ti,dlpc3433.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/ti,dlpc3433.yaml
@@ -83,7 +83,7 @@ examples:
- |
#include <dt-bindings/gpio/gpio.h>
- i2c1 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml
index a412a1da950f..81ca3cbc7abe 100644
--- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml
@@ -51,7 +51,7 @@ additionalProperties: false
examples:
- |
- i2c1 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml
index 0b6f5bef120f..779d8c57f854 100644
--- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml
@@ -87,7 +87,7 @@ examples:
- |
#include <dt-bindings/gpio/gpio.h>
- i2c1 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/display/panel/nec,nl8048hl11.yaml b/Documentation/devicetree/bindings/display/panel/nec,nl8048hl11.yaml
index 3b09b359023e..accf933d6e46 100644
--- a/Documentation/devicetree/bindings/display/panel/nec,nl8048hl11.yaml
+++ b/Documentation/devicetree/bindings/display/panel/nec,nl8048hl11.yaml
@@ -41,7 +41,7 @@ examples:
- |
#include <dt-bindings/gpio/gpio.h>
- spi0 {
+ spi {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml b/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml
index 669f70b1b4c4..8bd58913804a 100644
--- a/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml
+++ b/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml
@@ -226,7 +226,7 @@ unevaluatedProperties: false
examples:
- |
- i2c1 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
@@ -239,7 +239,7 @@ examples:
ssd1306_i2c: oled@3d {
compatible = "solomon,ssd1306";
- reg = <0x3c>;
+ reg = <0x3d>;
pwms = <&pwm 4 3000>;
reset-gpios = <&gpio2 7>;
solomon,com-lrremap;
diff --git a/Documentation/devicetree/bindings/eeprom/at25.yaml b/Documentation/devicetree/bindings/eeprom/at25.yaml
index 0f5a8ef996d3..11e2a95a7bcb 100644
--- a/Documentation/devicetree/bindings/eeprom/at25.yaml
+++ b/Documentation/devicetree/bindings/eeprom/at25.yaml
@@ -122,7 +122,7 @@ unevaluatedProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
- spi0 {
+ spi {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml b/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml
index 2e5b39881449..e00c8072bae9 100644
--- a/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml
+++ b/Documentation/devicetree/bindings/extcon/extcon-usbc-cros-ec.yaml
@@ -34,7 +34,7 @@ additionalProperties: false
examples:
- |
- spi0 {
+ spi {
#address-cells = <1>;
#size-cells = <0>;
cros-ec@0 {
diff --git a/Documentation/devicetree/bindings/extcon/extcon-usbc-tusb320.yaml b/Documentation/devicetree/bindings/extcon/extcon-usbc-tusb320.yaml
index 71a9f2e5d0dc..126107dd57b1 100644
--- a/Documentation/devicetree/bindings/extcon/extcon-usbc-tusb320.yaml
+++ b/Documentation/devicetree/bindings/extcon/extcon-usbc-tusb320.yaml
@@ -30,7 +30,7 @@ additionalProperties: false
examples:
- |
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
tusb320@61 {
diff --git a/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml b/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml
index 48bf414aa50e..5b0134304e51 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml
+++ b/Documentation/devicetree/bindings/gpio/gpio-pca9570.yaml
@@ -34,7 +34,7 @@ additionalProperties: false
examples:
- |
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml b/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml
index 1b70e9f308f3..fa116148ee90 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml
+++ b/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml
@@ -151,7 +151,7 @@ examples:
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
@@ -177,7 +177,7 @@ examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
- i2c1 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
@@ -203,7 +203,7 @@ examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
- i2c2 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
@@ -221,7 +221,7 @@ examples:
};
- |
- i2c3 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml b/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml
index cf523615f5e3..ab151c9db219 100644
--- a/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml
+++ b/Documentation/devicetree/bindings/i2c/google,cros-ec-i2c-tunnel.yaml
@@ -39,7 +39,7 @@ unevaluatedProperties: false
examples:
- |
- spi0 {
+ spi {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml b/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml
index 14bebe1ad8f8..34ef5215c150 100644
--- a/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml
+++ b/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml
@@ -58,7 +58,7 @@ examples:
#include <dt-bindings/leds/common.h>
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/leds/issi,is31fl319x.yaml b/Documentation/devicetree/bindings/leds/issi,is31fl319x.yaml
index d1b01bae9f63..3c0431c51159 100644
--- a/Documentation/devicetree/bindings/leds/issi,is31fl319x.yaml
+++ b/Documentation/devicetree/bindings/leds/issi,is31fl319x.yaml
@@ -165,7 +165,7 @@ examples:
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/leds/leds-aw2013.yaml b/Documentation/devicetree/bindings/leds/leds-aw2013.yaml
index 6c3ea0f06cef..08f3e1cfc1b1 100644
--- a/Documentation/devicetree/bindings/leds/leds-aw2013.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-aw2013.yaml
@@ -54,7 +54,7 @@ examples:
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/leds/leds-rt4505.yaml b/Documentation/devicetree/bindings/leds/leds-rt4505.yaml
index cb71fec173c1..bfd0e240f7d6 100644
--- a/Documentation/devicetree/bindings/leds/leds-rt4505.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-rt4505.yaml
@@ -39,7 +39,7 @@ examples:
- |
#include <dt-bindings/leds/common.h>
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/leds/ti,tca6507.yaml b/Documentation/devicetree/bindings/leds/ti,tca6507.yaml
index 9ce5c0f16e17..4b1575e4f180 100644
--- a/Documentation/devicetree/bindings/leds/ti,tca6507.yaml
+++ b/Documentation/devicetree/bindings/leds/ti,tca6507.yaml
@@ -87,7 +87,7 @@ examples:
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml b/Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml
index 1d6af1bf9a6b..be00de2f2d58 100644
--- a/Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/aptina,mt9p031.yaml
@@ -82,7 +82,7 @@ additionalProperties: false
examples:
- |
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml b/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml
index e53b8d65f381..088022f88010 100644
--- a/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.yaml
@@ -55,7 +55,7 @@ additionalProperties: false
examples:
- |
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/media/i2c/imx219.yaml b/Documentation/devicetree/bindings/media/i2c/imx219.yaml
index 5fc96944b448..07d088cf66e0 100644
--- a/Documentation/devicetree/bindings/media/i2c/imx219.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/imx219.yaml
@@ -83,7 +83,7 @@ additionalProperties: false
examples:
- |
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/media/i2c/imx258.yaml b/Documentation/devicetree/bindings/media/i2c/imx258.yaml
index cde0f7383b2a..80d24220baa0 100644
--- a/Documentation/devicetree/bindings/media/i2c/imx258.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/imx258.yaml
@@ -84,7 +84,7 @@ additionalProperties: false
examples:
- |
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
@@ -111,7 +111,7 @@ examples:
};
- |
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml b/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml
index edde4201116f..f8ace8cbccdb 100644
--- a/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml
@@ -106,7 +106,7 @@ examples:
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/media/video-interfaces.h>
- i2c2 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5648.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5648.yaml
index 61e4e9cf8783..1f497679168c 100644
--- a/Documentation/devicetree/bindings/media/i2c/ovti,ov5648.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5648.yaml
@@ -81,7 +81,7 @@ examples:
#include <dt-bindings/clock/sun8i-v3s-ccu.h>
#include <dt-bindings/gpio/gpio.h>
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml
index 161e6d598e1c..5d24edba8f99 100644
--- a/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov772x.yaml
@@ -107,7 +107,7 @@ examples:
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/media/video-interfaces.h>
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
ov772x: camera@21 {
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov8865.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov8865.yaml
index 6bac326dceaf..8a70e23ba6ab 100644
--- a/Documentation/devicetree/bindings/media/i2c/ovti,ov8865.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov8865.yaml
@@ -82,7 +82,7 @@ examples:
#include <dt-bindings/clock/sun8i-a83t-ccu.h>
#include <dt-bindings/gpio/gpio.h>
- i2c2 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov9282.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov9282.yaml
index 0c4654e70d46..79a7658f6d05 100644
--- a/Documentation/devicetree/bindings/media/i2c/ovti,ov9282.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov9282.yaml
@@ -78,7 +78,7 @@ additionalProperties: false
examples:
- |
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/media/i2c/rda,rda5807.yaml b/Documentation/devicetree/bindings/media/i2c/rda,rda5807.yaml
index f50e54a722eb..34a05df786ce 100644
--- a/Documentation/devicetree/bindings/media/i2c/rda,rda5807.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/rda,rda5807.yaml
@@ -50,7 +50,7 @@ additionalProperties: false
examples:
- |
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml
index c9760f895b3e..e2470dd5920c 100644
--- a/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml
@@ -97,7 +97,7 @@ examples:
- |
#include <dt-bindings/gpio/gpio.h>
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml
index 4271fc3cc623..b397a730ee94 100644
--- a/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml
@@ -52,7 +52,7 @@ additionalProperties: false
examples:
- |
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx334.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx334.yaml
index f5055b9db693..592cbcebc8ea 100644
--- a/Documentation/devicetree/bindings/media/i2c/sony,imx334.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx334.yaml
@@ -65,7 +65,7 @@ additionalProperties: false
examples:
- |
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml
index cf2ca2702cc9..a167dcdb3a32 100644
--- a/Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml
@@ -66,7 +66,7 @@ additionalProperties: false
examples:
- |
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml
index 60dc25ff2b9e..d9b7815650fd 100644
--- a/Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml
@@ -77,7 +77,7 @@ additionalProperties: false
examples:
- |
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/mfd/actions,atc260x.yaml b/Documentation/devicetree/bindings/mfd/actions,atc260x.yaml
index c3a368a0fe93..6811246c5771 100644
--- a/Documentation/devicetree/bindings/mfd/actions,atc260x.yaml
+++ b/Documentation/devicetree/bindings/mfd/actions,atc260x.yaml
@@ -129,7 +129,7 @@ required:
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
index cdf1d719efe9..8caa48f4570e 100644
--- a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
+++ b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
@@ -246,7 +246,7 @@ examples:
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
@@ -263,7 +263,7 @@ examples:
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
- spi0 {
+ spi {
#address-cells = <1>;
#size-cells = <0>;
@@ -296,7 +296,7 @@ examples:
# Example for FPMCU
- |
- spi0 {
+ spi {
#address-cells = <0x1>;
#size-cells = <0x0>;
diff --git a/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml b/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml
index 3fdd9cb5b347..bd36a07c1721 100644
--- a/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml
+++ b/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml
@@ -95,7 +95,7 @@ required:
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml b/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml
index b7a8747d5fa0..24d03996b93a 100644
--- a/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml
+++ b/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml
@@ -299,7 +299,7 @@ additionalProperties: false
examples:
- |
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
@@ -315,7 +315,7 @@ examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/net/asix,ax88796c.yaml b/Documentation/devicetree/bindings/net/asix,ax88796c.yaml
index 164d1ff9e83c..6b849a4349c0 100644
--- a/Documentation/devicetree/bindings/net/asix,ax88796c.yaml
+++ b/Documentation/devicetree/bindings/net/asix,ax88796c.yaml
@@ -58,7 +58,7 @@ examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
- spi0 {
+ spi {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml b/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml
index fce84aecae77..2a98b26630cb 100644
--- a/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml
+++ b/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml
@@ -62,7 +62,7 @@ examples:
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
- spi0 {
+ spi {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
index a4b53434c85c..e51be1ac0362 100644
--- a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
@@ -67,7 +67,7 @@ examples:
};
};
- spi0 {
+ spi {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
index 41c9760227cd..12baee45752c 100644
--- a/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
+++ b/Documentation/devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml
@@ -69,7 +69,7 @@ examples:
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
- i2c4 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/net/vertexcom-mse102x.yaml b/Documentation/devicetree/bindings/net/vertexcom-mse102x.yaml
index 6a71f694cb55..1a2fec4857f5 100644
--- a/Documentation/devicetree/bindings/net/vertexcom-mse102x.yaml
+++ b/Documentation/devicetree/bindings/net/vertexcom-mse102x.yaml
@@ -55,7 +55,7 @@ additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
- spi0 {
+ spi {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml
index f799a1e52173..75c9489f319b 100644
--- a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml
@@ -89,7 +89,7 @@ examples:
#include <dt-bindings/interrupt-controller/irq.h>
// For wl12xx family:
- spi1 {
+ spi {
#address-cells = <1>;
#size-cells = <0>;
@@ -104,8 +104,11 @@ examples:
};
};
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
// For wl18xx family:
- spi2 {
+ spi {
#address-cells = <1>;
#size-cells = <0>;
@@ -118,6 +121,9 @@ examples:
};
};
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
// SDIO example:
mmc3 {
vmmc-supply = <&wlan_en_reg>;
diff --git a/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml b/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml
index 008c3ab7f1bb..ca9d246d46fe 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml
@@ -31,7 +31,7 @@ description: |
};
};
state_1_node_a {
- spi0 {
+ spi {
function = "spi0";
groups = "spi0pins";
};
diff --git a/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml
index 69c0dd9998ea..d78c3cd0c295 100644
--- a/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml
@@ -293,7 +293,7 @@ examples:
pinctrl-names = "default";
};
- i2c0 {
+ i2c {
pinctrl-0 = <&i2c0_pins_default>;
pinctrl-names = "default";
};
diff --git a/Documentation/devicetree/bindings/power/supply/bq2415x.yaml b/Documentation/devicetree/bindings/power/supply/bq2415x.yaml
index f7287ffd4b12..13822346e708 100644
--- a/Documentation/devicetree/bindings/power/supply/bq2415x.yaml
+++ b/Documentation/devicetree/bindings/power/supply/bq2415x.yaml
@@ -77,7 +77,7 @@ additionalProperties: false
examples:
- |
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/power/supply/bq24190.yaml b/Documentation/devicetree/bindings/power/supply/bq24190.yaml
index 001c0ffb408d..d3ebc9de8c0b 100644
--- a/Documentation/devicetree/bindings/power/supply/bq24190.yaml
+++ b/Documentation/devicetree/bindings/power/supply/bq24190.yaml
@@ -75,7 +75,7 @@ examples:
charge-term-current-microamp = <128000>;
};
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/power/supply/bq24257.yaml b/Documentation/devicetree/bindings/power/supply/bq24257.yaml
index cc45939d385b..eb064bbf876c 100644
--- a/Documentation/devicetree/bindings/power/supply/bq24257.yaml
+++ b/Documentation/devicetree/bindings/power/supply/bq24257.yaml
@@ -84,7 +84,7 @@ examples:
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
@@ -104,7 +104,7 @@ examples:
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/power/supply/bq24735.yaml b/Documentation/devicetree/bindings/power/supply/bq24735.yaml
index 388ee16f8a1e..af41e7ccd784 100644
--- a/Documentation/devicetree/bindings/power/supply/bq24735.yaml
+++ b/Documentation/devicetree/bindings/power/supply/bq24735.yaml
@@ -77,7 +77,7 @@ examples:
- |
#include <dt-bindings/gpio/gpio.h>
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/power/supply/bq2515x.yaml b/Documentation/devicetree/bindings/power/supply/bq2515x.yaml
index 1a1b240034ef..845822c87f2a 100644
--- a/Documentation/devicetree/bindings/power/supply/bq2515x.yaml
+++ b/Documentation/devicetree/bindings/power/supply/bq2515x.yaml
@@ -73,7 +73,7 @@ examples:
constant-charge-voltage-max-microvolt = <4000000>;
};
#include <dt-bindings/gpio/gpio.h>
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/power/supply/bq25890.yaml b/Documentation/devicetree/bindings/power/supply/bq25890.yaml
index dae27e93af09..0ad302ab2bcc 100644
--- a/Documentation/devicetree/bindings/power/supply/bq25890.yaml
+++ b/Documentation/devicetree/bindings/power/supply/bq25890.yaml
@@ -102,7 +102,7 @@ unevaluatedProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/power/supply/bq25980.yaml b/Documentation/devicetree/bindings/power/supply/bq25980.yaml
index b687b8bcd705..b70ce8d7f86c 100644
--- a/Documentation/devicetree/bindings/power/supply/bq25980.yaml
+++ b/Documentation/devicetree/bindings/power/supply/bq25980.yaml
@@ -95,7 +95,7 @@ examples:
};
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/power/supply/bq27xxx.yaml b/Documentation/devicetree/bindings/power/supply/bq27xxx.yaml
index 347d4433adc5..309ea33b5b25 100644
--- a/Documentation/devicetree/bindings/power/supply/bq27xxx.yaml
+++ b/Documentation/devicetree/bindings/power/supply/bq27xxx.yaml
@@ -75,15 +75,16 @@ additionalProperties: false
examples:
- |
- i2c0 {
+ bat: battery {
+ compatible = "simple-battery";
+ voltage-min-design-microvolt = <3200000>;
+ energy-full-design-microwatt-hours = <5290000>;
+ charge-full-design-microamp-hours = <1430000>;
+ };
+
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
- bat: battery {
- compatible = "simple-battery";
- voltage-min-design-microvolt = <3200000>;
- energy-full-design-microwatt-hours = <5290000>;
- charge-full-design-microamp-hours = <1430000>;
- };
bq27510g3: fuel-gauge@55 {
compatible = "ti,bq27510g3";
diff --git a/Documentation/devicetree/bindings/power/supply/lltc,ltc294x.yaml b/Documentation/devicetree/bindings/power/supply/lltc,ltc294x.yaml
index 774582cd3a2c..e68a97cb49fe 100644
--- a/Documentation/devicetree/bindings/power/supply/lltc,ltc294x.yaml
+++ b/Documentation/devicetree/bindings/power/supply/lltc,ltc294x.yaml
@@ -54,7 +54,7 @@ additionalProperties: false
examples:
- |
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
battery@64 {
diff --git a/Documentation/devicetree/bindings/power/supply/ltc4162-l.yaml b/Documentation/devicetree/bindings/power/supply/ltc4162-l.yaml
index cfffaeef8b09..29d536541152 100644
--- a/Documentation/devicetree/bindings/power/supply/ltc4162-l.yaml
+++ b/Documentation/devicetree/bindings/power/supply/ltc4162-l.yaml
@@ -54,7 +54,7 @@ additionalProperties: false
examples:
- |
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
charger: battery-charger@68 {
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max14656.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max14656.yaml
index 711066b8cdb9..b444b799848e 100644
--- a/Documentation/devicetree/bindings/power/supply/maxim,max14656.yaml
+++ b/Documentation/devicetree/bindings/power/supply/maxim,max14656.yaml
@@ -32,7 +32,7 @@ additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml
index 3a529326ecbd..2627cd3eed83 100644
--- a/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml
+++ b/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml
@@ -68,7 +68,7 @@ unevaluatedProperties: false
examples:
- |
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
@@ -82,7 +82,7 @@ examples:
};
- |
#include <dt-bindings/interrupt-controller/irq.h>
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml
index 64a0edb7bc47..085e2504d0dc 100644
--- a/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml
+++ b/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml
@@ -69,7 +69,7 @@ additionalProperties: false
examples:
- |
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml b/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml
index 27bebc1757ba..07e38be39f1b 100644
--- a/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml
+++ b/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml
@@ -68,7 +68,7 @@ additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/power/supply/ti,lp8727.yaml b/Documentation/devicetree/bindings/power/supply/ti,lp8727.yaml
index ce6fbdba8f6b..3a9e4310b433 100644
--- a/Documentation/devicetree/bindings/power/supply/ti,lp8727.yaml
+++ b/Documentation/devicetree/bindings/power/supply/ti,lp8727.yaml
@@ -61,7 +61,7 @@ additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/regulator/active-semi,act8865.yaml b/Documentation/devicetree/bindings/regulator/active-semi,act8865.yaml
index e8bf09faafb8..afe1abc2d727 100644
--- a/Documentation/devicetree/bindings/regulator/active-semi,act8865.yaml
+++ b/Documentation/devicetree/bindings/regulator/active-semi,act8865.yaml
@@ -90,7 +90,7 @@ examples:
- |
#include <dt-bindings/regulator/active-semi,8865-regulator.h>
- i2c1 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/regulator/google,cros-ec-regulator.yaml b/Documentation/devicetree/bindings/regulator/google,cros-ec-regulator.yaml
index 0921f012c901..0c6032de593a 100644
--- a/Documentation/devicetree/bindings/regulator/google,cros-ec-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/google,cros-ec-regulator.yaml
@@ -32,7 +32,7 @@ unevaluatedProperties: false
examples:
- |
- spi0 {
+ spi {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml b/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml
index aabf50f5b39e..e094c40a7072 100644
--- a/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml
@@ -109,7 +109,7 @@ additionalProperties: false
examples:
- |
- i2c1 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/sound/everest,es8316.yaml b/Documentation/devicetree/bindings/sound/everest,es8316.yaml
index d9f8f0c7f6bb..9f2b111818ea 100644
--- a/Documentation/devicetree/bindings/sound/everest,es8316.yaml
+++ b/Documentation/devicetree/bindings/sound/everest,es8316.yaml
@@ -40,7 +40,7 @@ unevaluatedProperties: false
examples:
- |
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
es8316: codec@11 {
diff --git a/Documentation/devicetree/bindings/sound/tas2562.yaml b/Documentation/devicetree/bindings/sound/tas2562.yaml
index 1085592cefcc..a5bb561bfcfb 100644
--- a/Documentation/devicetree/bindings/sound/tas2562.yaml
+++ b/Documentation/devicetree/bindings/sound/tas2562.yaml
@@ -66,7 +66,7 @@ unevaluatedProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
codec: codec@4c {
diff --git a/Documentation/devicetree/bindings/sound/tas2770.yaml b/Documentation/devicetree/bindings/sound/tas2770.yaml
index 982949ba8a4b..26088adb9dc2 100644
--- a/Documentation/devicetree/bindings/sound/tas2770.yaml
+++ b/Documentation/devicetree/bindings/sound/tas2770.yaml
@@ -68,7 +68,7 @@ unevaluatedProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
codec: codec@41 {
diff --git a/Documentation/devicetree/bindings/sound/tas27xx.yaml b/Documentation/devicetree/bindings/sound/tas27xx.yaml
index 0957dd435bb4..8cba01316855 100644
--- a/Documentation/devicetree/bindings/sound/tas27xx.yaml
+++ b/Documentation/devicetree/bindings/sound/tas27xx.yaml
@@ -61,7 +61,7 @@ unevaluatedProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
codec: codec@38 {
diff --git a/Documentation/devicetree/bindings/sound/tas5805m.yaml b/Documentation/devicetree/bindings/sound/tas5805m.yaml
index 3aade02d8a96..63edf52f061c 100644
--- a/Documentation/devicetree/bindings/sound/tas5805m.yaml
+++ b/Documentation/devicetree/bindings/sound/tas5805m.yaml
@@ -39,7 +39,7 @@ properties:
examples:
- |
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
tas5805m: tas5805m@2c {
diff --git a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
index 6b8214071115..c16e1760cf85 100644
--- a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
+++ b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
@@ -192,7 +192,7 @@ additionalProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
codec: codec@4c {
diff --git a/Documentation/devicetree/bindings/sound/zl38060.yaml b/Documentation/devicetree/bindings/sound/zl38060.yaml
index 2c5c02e34573..8bd201e573aa 100644
--- a/Documentation/devicetree/bindings/sound/zl38060.yaml
+++ b/Documentation/devicetree/bindings/sound/zl38060.yaml
@@ -56,7 +56,7 @@ unevaluatedProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
- spi0 {
+ spi {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/usb/maxim,max33359.yaml b/Documentation/devicetree/bindings/usb/maxim,max33359.yaml
index 8e513a6af378..3cb631ea7079 100644
--- a/Documentation/devicetree/bindings/usb/maxim,max33359.yaml
+++ b/Documentation/devicetree/bindings/usb/maxim,max33359.yaml
@@ -40,7 +40,7 @@ examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/usb/pd.h>
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/usb/maxim,max3420-udc.yaml b/Documentation/devicetree/bindings/usb/maxim,max3420-udc.yaml
index 1d893d3d3432..8e0f4ecc010d 100644
--- a/Documentation/devicetree/bindings/usb/maxim,max3420-udc.yaml
+++ b/Documentation/devicetree/bindings/usb/maxim,max3420-udc.yaml
@@ -52,7 +52,7 @@ examples:
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
- spi0 {
+ spi {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/usb/mediatek,mt6360-tcpc.yaml b/Documentation/devicetree/bindings/usb/mediatek,mt6360-tcpc.yaml
index c72257c19220..6cad7ae2c70d 100644
--- a/Documentation/devicetree/bindings/usb/mediatek,mt6360-tcpc.yaml
+++ b/Documentation/devicetree/bindings/usb/mediatek,mt6360-tcpc.yaml
@@ -43,7 +43,7 @@ examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/usb/pd.h>
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/usb/richtek,rt1711h.yaml b/Documentation/devicetree/bindings/usb/richtek,rt1711h.yaml
index 1999f614c89b..dd864b25a148 100644
--- a/Documentation/devicetree/bindings/usb/richtek,rt1711h.yaml
+++ b/Documentation/devicetree/bindings/usb/richtek,rt1711h.yaml
@@ -51,7 +51,7 @@ examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/usb/pd.h>
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/usb/richtek,rt1719.yaml b/Documentation/devicetree/bindings/usb/richtek,rt1719.yaml
index e3e87e4d3292..8b9bd2cc58e9 100644
--- a/Documentation/devicetree/bindings/usb/richtek,rt1719.yaml
+++ b/Documentation/devicetree/bindings/usb/richtek,rt1719.yaml
@@ -48,7 +48,7 @@ required:
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/usb/st,stusb160x.yaml b/Documentation/devicetree/bindings/usb/st,stusb160x.yaml
index ffcd9897ea38..f6840cd5750d 100644
--- a/Documentation/devicetree/bindings/usb/st,stusb160x.yaml
+++ b/Documentation/devicetree/bindings/usb/st,stusb160x.yaml
@@ -56,7 +56,7 @@ additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
- i2c4 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml
index a1cffb70c621..54c6586cb56d 100644
--- a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml
+++ b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml
@@ -51,7 +51,7 @@ additionalProperties: false
examples:
- |
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml b/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml
index 348a715d61f4..7dfa34d11b0e 100644
--- a/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml
+++ b/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml
@@ -43,7 +43,7 @@ additionalProperties: true
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
--
2.39.2
^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH] dt-bindings: Fix SPI and I2C bus node names in examples
2023-02-28 21:54 [PATCH] dt-bindings: Fix SPI and I2C bus node names in examples Rob Herring
@ 2023-02-28 21:58 ` Mark Brown
2023-03-01 6:51 ` Wolfram Sang
` (8 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Mark Brown @ 2023-02-28 21:58 UTC (permalink / raw)
To: Rob Herring
Cc: Krzysztof Kozlowski, devicetree, Miguel Ojeda, Benson Leung,
Guenter Roeck, Stephen Boyd, Andrzej Hajda, Neil Armstrong,
Robert Foss, Thierry Reding, Sam Ravnborg, MyungJoo Ham,
Chanwoo Choi, Linus Walleij, Bartosz Golaszewski, Pavel Machek,
Lee Jones, Mauro Carvalho Chehab, David S. Miller, Eric Dumazet,
Jakub Kicinski, Paolo Abeni, Wolfgang Grandegger, Kalle Valo,
Sebastian Reichel, Greg Kroah-Hartman, linux-clk, dri-devel,
linux-gpio, linux-i2c, linux-leds, linux-media, netdev,
linux-can, linux-wireless, linux-pm, alsa-devel, linux-usb
[-- Attachment #1: Type: text/plain, Size: 361 bytes --]
On Tue, Feb 28, 2023 at 03:54:33PM -0600, Rob Herring wrote:
> SPI and I2C bus node names are expected to be "spi" or "i2c",
> respectively, with nothing else, a unit-address, or a '-N' index. A
> pattern of 'spi0' or 'i2c0' or similar has crept in. Fix all these
> cases. Mostly scripted with the following commands:
Acked-by: Mark Brown <broonie@kernel.org>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] dt-bindings: Fix SPI and I2C bus node names in examples
2023-02-28 21:54 [PATCH] dt-bindings: Fix SPI and I2C bus node names in examples Rob Herring
2023-02-28 21:58 ` Mark Brown
@ 2023-03-01 6:51 ` Wolfram Sang
2023-03-01 7:42 ` Marc Kleine-Budde
` (7 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Wolfram Sang @ 2023-03-01 6:51 UTC (permalink / raw)
To: Rob Herring
Cc: Krzysztof Kozlowski, devicetree, Miguel Ojeda, Benson Leung,
Guenter Roeck, Stephen Boyd, Andrzej Hajda, Neil Armstrong,
Robert Foss, Thierry Reding, Sam Ravnborg, MyungJoo Ham,
Chanwoo Choi, Linus Walleij, Bartosz Golaszewski, Pavel Machek,
Lee Jones, Mauro Carvalho Chehab, David S. Miller, Eric Dumazet,
Jakub Kicinski, Paolo Abeni, Wolfgang Grandegger, Kalle Valo,
Sebastian Reichel, Mark Brown, Greg Kroah-Hartman, linux-clk,
dri-devel, linux-gpio, linux-i2c, linux-leds, linux-media,
netdev, linux-can, linux-wireless, linux-pm, alsa-devel,
linux-usb
[-- Attachment #1: Type: text/plain, Size: 655 bytes --]
4:33PM -0600, Rob Herring wrote:
> SPI and I2C bus node names are expected to be "spi" or "i2c",
> respectively, with nothing else, a unit-address, or a '-N' index. A
> pattern of 'spi0' or 'i2c0' or similar has crept in. Fix all these
> cases. Mostly scripted with the following commands:
>
> git grep -l '\si2c[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/i2c[0-9] {/i2c {/'
> git grep -l '\sspi[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/spi[0-9] {/spi {/'
>
> With this, a few errors in examples were exposed and fixed.
>
> Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Wolfram Sang <wsa@kernel.org>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] dt-bindings: Fix SPI and I2C bus node names in examples
2023-02-28 21:54 [PATCH] dt-bindings: Fix SPI and I2C bus node names in examples Rob Herring
2023-02-28 21:58 ` Mark Brown
2023-03-01 6:51 ` Wolfram Sang
@ 2023-03-01 7:42 ` Marc Kleine-Budde
2023-03-01 8:52 ` Lee Jones
` (6 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Marc Kleine-Budde @ 2023-03-01 7:42 UTC (permalink / raw)
To: Rob Herring
Cc: Krzysztof Kozlowski, devicetree, Miguel Ojeda, Benson Leung,
Guenter Roeck, Stephen Boyd, Andrzej Hajda, Neil Armstrong,
Robert Foss, Thierry Reding, Sam Ravnborg, MyungJoo Ham,
Chanwoo Choi, Linus Walleij, Bartosz Golaszewski, Pavel Machek,
Lee Jones, Mauro Carvalho Chehab, David S. Miller, Eric Dumazet,
Jakub Kicinski, Paolo Abeni, Wolfgang Grandegger, Kalle Valo,
Sebastian Reichel, Mark Brown, Greg Kroah-Hartman, linux-clk,
dri-devel, linux-gpio, linux-i2c, linux-leds, linux-media,
netdev, linux-can, linux-wireless, linux-pm, alsa-devel,
linux-usb
[-- Attachment #1: Type: text/plain, Size: 2603 bytes --]
On 28.02.2023 15:54:33, Rob Herring wrote:
> SPI and I2C bus node names are expected to be "spi" or "i2c",
> respectively, with nothing else, a unit-address, or a '-N' index. A
> pattern of 'spi0' or 'i2c0' or similar has crept in. Fix all these
> cases. Mostly scripted with the following commands:
>
> git grep -l '\si2c[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/i2c[0-9] {/i2c {/'
> git grep -l '\sspi[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/spi[0-9] {/spi {/'
>
> With this, a few errors in examples were exposed and fixed.
>
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
> Cc: Miguel Ojeda <ojeda@kernel.org>
> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
> Cc: Benson Leung <bleung@chromium.org>
> Cc: Guenter Roeck <groeck@chromium.org>
> Cc: Stephen Boyd <sboyd@kernel.org>
> Cc: Andrzej Hajda <andrzej.hajda@intel.com>
> Cc: Neil Armstrong <neil.armstrong@linaro.org>
> Cc: Robert Foss <rfoss@kernel.org>
> Cc: Thierry Reding <thierry.reding@gmail.com>
> Cc: Sam Ravnborg <sam@ravnborg.org>
> Cc: MyungJoo Ham <myungjoo.ham@samsung.com>
> Cc: Chanwoo Choi <cw00.choi@samsung.com>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: Bartosz Golaszewski <brgl@bgdev.pl>
> Cc: Pavel Machek <pavel@ucw.cz>
> Cc: Lee Jones <lee@kernel.org>
> Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
> Cc: "David S. Miller" <davem@davemloft.net>
> Cc: Eric Dumazet <edumazet@google.com>
> Cc: Jakub Kicinski <kuba@kernel.org>
> Cc: Paolo Abeni <pabeni@redhat.com>
> Cc: Wolfgang Grandegger <wg@grandegger.com>
> Cc: Kalle Valo <kvalo@kernel.org>
> Cc: Sebastian Reichel <sre@kernel.org>
> Cc: Mark Brown <broonie@kernel.org>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: linux-clk@vger.kernel.org
> Cc: dri-devel@lists.freedesktop.org
> Cc: linux-gpio@vger.kernel.org
> Cc: linux-i2c@vger.kernel.org
> Cc: linux-leds@vger.kernel.org
> Cc: linux-media@vger.kernel.org
> Cc: netdev@vger.kernel.org
> Cc: linux-can@vger.kernel.org
> Cc: linux-wireless@vger.kernel.org
> Cc: linux-pm@vger.kernel.org
> Cc: alsa-devel@alsa-project.org
> Cc: linux-usb@vger.kernel.org
> ---
> .../bindings/net/can/microchip,mcp251xfd.yaml | 2 +-
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for the microchip,mcp251xfd.yaml
--
Pengutronix e.K. | Marc Kleine-Budde |
Embedded Linux | https://www.pengutronix.de |
Vertretung West/Dortmund | Phone: +49-231-2826-924 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] dt-bindings: Fix SPI and I2C bus node names in examples
2023-02-28 21:54 [PATCH] dt-bindings: Fix SPI and I2C bus node names in examples Rob Herring
` (2 preceding siblings ...)
2023-03-01 7:42 ` Marc Kleine-Budde
@ 2023-03-01 8:52 ` Lee Jones
2023-03-01 14:45 ` Simon Glass
` (5 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Lee Jones @ 2023-03-01 8:52 UTC (permalink / raw)
To: Rob Herring
Cc: Krzysztof Kozlowski, devicetree, Miguel Ojeda, Benson Leung,
Guenter Roeck, Stephen Boyd, Andrzej Hajda, Neil Armstrong,
Robert Foss, Thierry Reding, Sam Ravnborg, MyungJoo Ham,
Chanwoo Choi, Linus Walleij, Bartosz Golaszewski, Pavel Machek,
Mauro Carvalho Chehab, David S. Miller, Eric Dumazet,
Jakub Kicinski, Paolo Abeni, Wolfgang Grandegger, Kalle Valo,
Sebastian Reichel, Mark Brown, Greg Kroah-Hartman, linux-clk,
dri-devel, linux-gpio, linux-i2c, linux-leds, linux-media,
netdev, linux-can, linux-wireless, linux-pm, alsa-devel,
linux-usb
On Tue, 28 Feb 2023, Rob Herring wrote:
> SPI and I2C bus node names are expected to be "spi" or "i2c",
> respectively, with nothing else, a unit-address, or a '-N' index. A
> pattern of 'spi0' or 'i2c0' or similar has crept in. Fix all these
> cases. Mostly scripted with the following commands:
>
> git grep -l '\si2c[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/i2c[0-9] {/i2c {/'
> git grep -l '\sspi[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/spi[0-9] {/spi {/'
>
> With this, a few errors in examples were exposed and fixed.
>
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
> Cc: Miguel Ojeda <ojeda@kernel.org>
> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
> Cc: Benson Leung <bleung@chromium.org>
> Cc: Guenter Roeck <groeck@chromium.org>
> Cc: Stephen Boyd <sboyd@kernel.org>
> Cc: Andrzej Hajda <andrzej.hajda@intel.com>
> Cc: Neil Armstrong <neil.armstrong@linaro.org>
> Cc: Robert Foss <rfoss@kernel.org>
> Cc: Thierry Reding <thierry.reding@gmail.com>
> Cc: Sam Ravnborg <sam@ravnborg.org>
> Cc: MyungJoo Ham <myungjoo.ham@samsung.com>
> Cc: Chanwoo Choi <cw00.choi@samsung.com>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: Bartosz Golaszewski <brgl@bgdev.pl>
> Cc: Pavel Machek <pavel@ucw.cz>
> Cc: Lee Jones <lee@kernel.org>
> Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
> Cc: "David S. Miller" <davem@davemloft.net>
> Cc: Eric Dumazet <edumazet@google.com>
> Cc: Jakub Kicinski <kuba@kernel.org>
> Cc: Paolo Abeni <pabeni@redhat.com>
> Cc: Wolfgang Grandegger <wg@grandegger.com>
> Cc: Kalle Valo <kvalo@kernel.org>
> Cc: Sebastian Reichel <sre@kernel.org>
> Cc: Mark Brown <broonie@kernel.org>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: linux-clk@vger.kernel.org
> Cc: dri-devel@lists.freedesktop.org
> Cc: linux-gpio@vger.kernel.org
> Cc: linux-i2c@vger.kernel.org
> Cc: linux-leds@vger.kernel.org
> Cc: linux-media@vger.kernel.org
> Cc: netdev@vger.kernel.org
> Cc: linux-can@vger.kernel.org
> Cc: linux-wireless@vger.kernel.org
> Cc: linux-pm@vger.kernel.org
> Cc: alsa-devel@alsa-project.org
> Cc: linux-usb@vger.kernel.org
> ---
> .../bindings/auxdisplay/holtek,ht16k33.yaml | 2 +-
> .../bindings/chrome/google,cros-ec-typec.yaml | 2 +-
> .../chrome/google,cros-kbd-led-backlight.yaml | 2 +-
> .../devicetree/bindings/clock/ti,lmk04832.yaml | 2 +-
> .../bindings/display/bridge/analogix,anx7625.yaml | 2 +-
> .../bindings/display/bridge/anx6345.yaml | 2 +-
> .../bindings/display/bridge/lontium,lt8912b.yaml | 2 +-
> .../bindings/display/bridge/nxp,ptn3460.yaml | 2 +-
> .../bindings/display/bridge/ps8640.yaml | 2 +-
> .../bindings/display/bridge/sil,sii9234.yaml | 2 +-
> .../bindings/display/bridge/ti,dlpc3433.yaml | 2 +-
> .../bindings/display/bridge/toshiba,tc358762.yaml | 2 +-
> .../bindings/display/bridge/toshiba,tc358768.yaml | 2 +-
> .../bindings/display/panel/nec,nl8048hl11.yaml | 2 +-
> .../bindings/display/solomon,ssd1307fb.yaml | 4 ++--
> .../devicetree/bindings/eeprom/at25.yaml | 2 +-
> .../bindings/extcon/extcon-usbc-cros-ec.yaml | 2 +-
> .../bindings/extcon/extcon-usbc-tusb320.yaml | 2 +-
> .../devicetree/bindings/gpio/gpio-pca9570.yaml | 2 +-
> .../devicetree/bindings/gpio/gpio-pca95xx.yaml | 8 ++++----
> .../bindings/i2c/google,cros-ec-i2c-tunnel.yaml | 2 +-
> .../bindings/leds/cznic,turris-omnia-leds.yaml | 2 +-
[...]
> .../devicetree/bindings/leds/issi,is31fl319x.yaml | 2 +-
> .../devicetree/bindings/leds/leds-aw2013.yaml | 2 +-
> .../devicetree/bindings/leds/leds-rt4505.yaml | 2 +-
> .../devicetree/bindings/leds/ti,tca6507.yaml | 2 +-
Acked-by: Lee Jones <lee@kernel.org>
> .../devicetree/bindings/mfd/actions,atc260x.yaml | 2 +-
> .../devicetree/bindings/mfd/google,cros-ec.yaml | 6 +++---
> .../devicetree/bindings/mfd/ti,tps65086.yaml | 2 +-
> .../devicetree/bindings/mfd/x-powers,axp152.yaml | 4 ++--
> .../devicetree/bindings/net/asix,ax88796c.yaml | 2 +-
Acked-by: Lee Jones <lee@kernel.org>
[...]
--
Lee Jones [李琼斯]
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] dt-bindings: Fix SPI and I2C bus node names in examples
2023-02-28 21:54 [PATCH] dt-bindings: Fix SPI and I2C bus node names in examples Rob Herring
` (3 preceding siblings ...)
2023-03-01 8:52 ` Lee Jones
@ 2023-03-01 14:45 ` Simon Glass
2023-03-01 23:43 ` Sebastian Reichel
` (4 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Simon Glass @ 2023-03-01 14:45 UTC (permalink / raw)
To: Rob Herring
Cc: Krzysztof Kozlowski, devicetree, Miguel Ojeda, Benson Leung,
Guenter Roeck, Stephen Boyd, Andrzej Hajda, Neil Armstrong,
Robert Foss, Thierry Reding, Sam Ravnborg, MyungJoo Ham,
Chanwoo Choi, Linus Walleij, Bartosz Golaszewski, Pavel Machek,
Lee Jones, Mauro Carvalho Chehab, David S. Miller, Eric Dumazet,
Jakub Kicinski, Paolo Abeni, Wolfgang Grandegger, Kalle Valo,
Sebastian Reichel, Mark Brown, Greg Kroah-Hartman, linux-clk,
dri-devel, linux-gpio, linux-i2c, linux-leds, linux-media,
netdev, linux-can, linux-wireless, linux-pm, alsa-devel,
linux-usb
On Tue, 28 Feb 2023 at 14:54, Rob Herring <robh@kernel.org> wrote:
>
> SPI and I2C bus node names are expected to be "spi" or "i2c",
> respectively, with nothing else, a unit-address, or a '-N' index. A
> pattern of 'spi0' or 'i2c0' or similar has crept in. Fix all these
> cases. Mostly scripted with the following commands:
>
> git grep -l '\si2c[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/i2c[0-9] {/i2c {/'
> git grep -l '\sspi[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/spi[0-9] {/spi {/'
>
> With this, a few errors in examples were exposed and fixed.
>
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
> Cc: Miguel Ojeda <ojeda@kernel.org>
> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
> Cc: Benson Leung <bleung@chromium.org>
> Cc: Guenter Roeck <groeck@chromium.org>
> Cc: Stephen Boyd <sboyd@kernel.org>
> Cc: Andrzej Hajda <andrzej.hajda@intel.com>
> Cc: Neil Armstrong <neil.armstrong@linaro.org>
> Cc: Robert Foss <rfoss@kernel.org>
> Cc: Thierry Reding <thierry.reding@gmail.com>
> Cc: Sam Ravnborg <sam@ravnborg.org>
> Cc: MyungJoo Ham <myungjoo.ham@samsung.com>
> Cc: Chanwoo Choi <cw00.choi@samsung.com>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: Bartosz Golaszewski <brgl@bgdev.pl>
> Cc: Pavel Machek <pavel@ucw.cz>
> Cc: Lee Jones <lee@kernel.org>
> Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
> Cc: "David S. Miller" <davem@davemloft.net>
> Cc: Eric Dumazet <edumazet@google.com>
> Cc: Jakub Kicinski <kuba@kernel.org>
> Cc: Paolo Abeni <pabeni@redhat.com>
> Cc: Wolfgang Grandegger <wg@grandegger.com>
> Cc: Kalle Valo <kvalo@kernel.org>
> Cc: Sebastian Reichel <sre@kernel.org>
> Cc: Mark Brown <broonie@kernel.org>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: linux-clk@vger.kernel.org
> Cc: dri-devel@lists.freedesktop.org
> Cc: linux-gpio@vger.kernel.org
> Cc: linux-i2c@vger.kernel.org
> Cc: linux-leds@vger.kernel.org
> Cc: linux-media@vger.kernel.org
> Cc: netdev@vger.kernel.org
> Cc: linux-can@vger.kernel.org
> Cc: linux-wireless@vger.kernel.org
> Cc: linux-pm@vger.kernel.org
> Cc: alsa-devel@alsa-project.org
> Cc: linux-usb@vger.kernel.org
> ---
Reviewed-by: Simon Glass <sjg@chromium.org>
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] dt-bindings: Fix SPI and I2C bus node names in examples
2023-02-28 21:54 [PATCH] dt-bindings: Fix SPI and I2C bus node names in examples Rob Herring
` (4 preceding siblings ...)
2023-03-01 14:45 ` Simon Glass
@ 2023-03-01 23:43 ` Sebastian Reichel
2023-03-02 16:45 ` Sam Ravnborg
` (3 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Sebastian Reichel @ 2023-03-01 23:43 UTC (permalink / raw)
To: Rob Herring
Cc: Krzysztof Kozlowski, devicetree, Miguel Ojeda, Benson Leung,
Guenter Roeck, Stephen Boyd, Andrzej Hajda, Neil Armstrong,
Robert Foss, Thierry Reding, Sam Ravnborg, MyungJoo Ham,
Chanwoo Choi, Linus Walleij, Bartosz Golaszewski, Pavel Machek,
Lee Jones, Mauro Carvalho Chehab, David S. Miller, Eric Dumazet,
Jakub Kicinski, Paolo Abeni, Wolfgang Grandegger, Kalle Valo,
Mark Brown, Greg Kroah-Hartman, linux-clk, dri-devel, linux-gpio,
linux-i2c, linux-leds, linux-media, netdev, linux-can,
linux-wireless, linux-pm, alsa-devel, linux-usb
[-- Attachment #1: Type: text/plain, Size: 10774 bytes --]
Hi,
On Tue, Feb 28, 2023 at 03:54:33PM -0600, Rob Herring wrote:
> SPI and I2C bus node names are expected to be "spi" or "i2c",
> respectively, with nothing else, a unit-address, or a '-N' index. A
> pattern of 'spi0' or 'i2c0' or similar has crept in. Fix all these
> cases. Mostly scripted with the following commands:
>
> git grep -l '\si2c[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/i2c[0-9] {/i2c {/'
> git grep -l '\sspi[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/spi[0-9] {/spi {/'
>
> With this, a few errors in examples were exposed and fixed.
>
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for power-supply
-- Sebastian
...
> .../devicetree/bindings/power/supply/bq2415x.yaml | 2 +-
> .../devicetree/bindings/power/supply/bq24190.yaml | 2 +-
> .../devicetree/bindings/power/supply/bq24257.yaml | 4 ++--
> .../devicetree/bindings/power/supply/bq24735.yaml | 2 +-
> .../devicetree/bindings/power/supply/bq2515x.yaml | 2 +-
> .../devicetree/bindings/power/supply/bq25890.yaml | 2 +-
> .../devicetree/bindings/power/supply/bq25980.yaml | 2 +-
> .../devicetree/bindings/power/supply/bq27xxx.yaml | 15 ++++++++-------
> .../bindings/power/supply/lltc,ltc294x.yaml | 2 +-
> .../bindings/power/supply/ltc4162-l.yaml | 2 +-
> .../bindings/power/supply/maxim,max14656.yaml | 2 +-
> .../bindings/power/supply/maxim,max17040.yaml | 4 ++--
> .../bindings/power/supply/maxim,max17042.yaml | 2 +-
> .../bindings/power/supply/richtek,rt9455.yaml | 2 +-
> .../bindings/power/supply/ti,lp8727.yaml | 2 +-
...
> diff --git a/Documentation/devicetree/bindings/power/supply/bq2415x.yaml b/Documentation/devicetree/bindings/power/supply/bq2415x.yaml
> index f7287ffd4b12..13822346e708 100644
> --- a/Documentation/devicetree/bindings/power/supply/bq2415x.yaml
> +++ b/Documentation/devicetree/bindings/power/supply/bq2415x.yaml
> @@ -77,7 +77,7 @@ additionalProperties: false
>
> examples:
> - |
> - i2c0 {
> + i2c {
> #address-cells = <1>;
> #size-cells = <0>;
>
> diff --git a/Documentation/devicetree/bindings/power/supply/bq24190.yaml b/Documentation/devicetree/bindings/power/supply/bq24190.yaml
> index 001c0ffb408d..d3ebc9de8c0b 100644
> --- a/Documentation/devicetree/bindings/power/supply/bq24190.yaml
> +++ b/Documentation/devicetree/bindings/power/supply/bq24190.yaml
> @@ -75,7 +75,7 @@ examples:
> charge-term-current-microamp = <128000>;
> };
>
> - i2c0 {
> + i2c {
> #address-cells = <1>;
> #size-cells = <0>;
>
> diff --git a/Documentation/devicetree/bindings/power/supply/bq24257.yaml b/Documentation/devicetree/bindings/power/supply/bq24257.yaml
> index cc45939d385b..eb064bbf876c 100644
> --- a/Documentation/devicetree/bindings/power/supply/bq24257.yaml
> +++ b/Documentation/devicetree/bindings/power/supply/bq24257.yaml
> @@ -84,7 +84,7 @@ examples:
> - |
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/interrupt-controller/irq.h>
> - i2c0 {
> + i2c {
> #address-cells = <1>;
> #size-cells = <0>;
>
> @@ -104,7 +104,7 @@ examples:
> - |
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/interrupt-controller/irq.h>
> - i2c0 {
> + i2c {
> #address-cells = <1>;
> #size-cells = <0>;
>
> diff --git a/Documentation/devicetree/bindings/power/supply/bq24735.yaml b/Documentation/devicetree/bindings/power/supply/bq24735.yaml
> index 388ee16f8a1e..af41e7ccd784 100644
> --- a/Documentation/devicetree/bindings/power/supply/bq24735.yaml
> +++ b/Documentation/devicetree/bindings/power/supply/bq24735.yaml
> @@ -77,7 +77,7 @@ examples:
> - |
> #include <dt-bindings/gpio/gpio.h>
>
> - i2c0 {
> + i2c {
> #address-cells = <1>;
> #size-cells = <0>;
>
> diff --git a/Documentation/devicetree/bindings/power/supply/bq2515x.yaml b/Documentation/devicetree/bindings/power/supply/bq2515x.yaml
> index 1a1b240034ef..845822c87f2a 100644
> --- a/Documentation/devicetree/bindings/power/supply/bq2515x.yaml
> +++ b/Documentation/devicetree/bindings/power/supply/bq2515x.yaml
> @@ -73,7 +73,7 @@ examples:
> constant-charge-voltage-max-microvolt = <4000000>;
> };
> #include <dt-bindings/gpio/gpio.h>
> - i2c0 {
> + i2c {
> #address-cells = <1>;
> #size-cells = <0>;
>
> diff --git a/Documentation/devicetree/bindings/power/supply/bq25890.yaml b/Documentation/devicetree/bindings/power/supply/bq25890.yaml
> index dae27e93af09..0ad302ab2bcc 100644
> --- a/Documentation/devicetree/bindings/power/supply/bq25890.yaml
> +++ b/Documentation/devicetree/bindings/power/supply/bq25890.yaml
> @@ -102,7 +102,7 @@ unevaluatedProperties: false
> examples:
> - |
> #include <dt-bindings/interrupt-controller/irq.h>
> - i2c0 {
> + i2c {
> #address-cells = <1>;
> #size-cells = <0>;
>
> diff --git a/Documentation/devicetree/bindings/power/supply/bq25980.yaml b/Documentation/devicetree/bindings/power/supply/bq25980.yaml
> index b687b8bcd705..b70ce8d7f86c 100644
> --- a/Documentation/devicetree/bindings/power/supply/bq25980.yaml
> +++ b/Documentation/devicetree/bindings/power/supply/bq25980.yaml
> @@ -95,7 +95,7 @@ examples:
> };
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/interrupt-controller/irq.h>
> - i2c0 {
> + i2c {
> #address-cells = <1>;
> #size-cells = <0>;
>
> diff --git a/Documentation/devicetree/bindings/power/supply/bq27xxx.yaml b/Documentation/devicetree/bindings/power/supply/bq27xxx.yaml
> index 347d4433adc5..309ea33b5b25 100644
> --- a/Documentation/devicetree/bindings/power/supply/bq27xxx.yaml
> +++ b/Documentation/devicetree/bindings/power/supply/bq27xxx.yaml
> @@ -75,15 +75,16 @@ additionalProperties: false
>
> examples:
> - |
> - i2c0 {
> + bat: battery {
> + compatible = "simple-battery";
> + voltage-min-design-microvolt = <3200000>;
> + energy-full-design-microwatt-hours = <5290000>;
> + charge-full-design-microamp-hours = <1430000>;
> + };
> +
> + i2c {
> #address-cells = <1>;
> #size-cells = <0>;
> - bat: battery {
> - compatible = "simple-battery";
> - voltage-min-design-microvolt = <3200000>;
> - energy-full-design-microwatt-hours = <5290000>;
> - charge-full-design-microamp-hours = <1430000>;
> - };
>
> bq27510g3: fuel-gauge@55 {
> compatible = "ti,bq27510g3";
> diff --git a/Documentation/devicetree/bindings/power/supply/lltc,ltc294x.yaml b/Documentation/devicetree/bindings/power/supply/lltc,ltc294x.yaml
> index 774582cd3a2c..e68a97cb49fe 100644
> --- a/Documentation/devicetree/bindings/power/supply/lltc,ltc294x.yaml
> +++ b/Documentation/devicetree/bindings/power/supply/lltc,ltc294x.yaml
> @@ -54,7 +54,7 @@ additionalProperties: false
>
> examples:
> - |
> - i2c0 {
> + i2c {
> #address-cells = <1>;
> #size-cells = <0>;
> battery@64 {
> diff --git a/Documentation/devicetree/bindings/power/supply/ltc4162-l.yaml b/Documentation/devicetree/bindings/power/supply/ltc4162-l.yaml
> index cfffaeef8b09..29d536541152 100644
> --- a/Documentation/devicetree/bindings/power/supply/ltc4162-l.yaml
> +++ b/Documentation/devicetree/bindings/power/supply/ltc4162-l.yaml
> @@ -54,7 +54,7 @@ additionalProperties: false
>
> examples:
> - |
> - i2c0 {
> + i2c {
> #address-cells = <1>;
> #size-cells = <0>;
> charger: battery-charger@68 {
> diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max14656.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max14656.yaml
> index 711066b8cdb9..b444b799848e 100644
> --- a/Documentation/devicetree/bindings/power/supply/maxim,max14656.yaml
> +++ b/Documentation/devicetree/bindings/power/supply/maxim,max14656.yaml
> @@ -32,7 +32,7 @@ additionalProperties: false
> examples:
> - |
> #include <dt-bindings/interrupt-controller/irq.h>
> - i2c0 {
> + i2c {
> #address-cells = <1>;
> #size-cells = <0>;
>
> diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml
> index 3a529326ecbd..2627cd3eed83 100644
> --- a/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml
> +++ b/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml
> @@ -68,7 +68,7 @@ unevaluatedProperties: false
>
> examples:
> - |
> - i2c0 {
> + i2c {
> #address-cells = <1>;
> #size-cells = <0>;
>
> @@ -82,7 +82,7 @@ examples:
> };
> - |
> #include <dt-bindings/interrupt-controller/irq.h>
> - i2c0 {
> + i2c {
> #address-cells = <1>;
> #size-cells = <0>;
>
> diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml
> index 64a0edb7bc47..085e2504d0dc 100644
> --- a/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml
> +++ b/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml
> @@ -69,7 +69,7 @@ additionalProperties: false
>
> examples:
> - |
> - i2c0 {
> + i2c {
> #address-cells = <1>;
> #size-cells = <0>;
>
> diff --git a/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml b/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml
> index 27bebc1757ba..07e38be39f1b 100644
> --- a/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml
> +++ b/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml
> @@ -68,7 +68,7 @@ additionalProperties: false
> examples:
> - |
> #include <dt-bindings/interrupt-controller/irq.h>
> - i2c0 {
> + i2c {
> #address-cells = <1>;
> #size-cells = <0>;
>
> diff --git a/Documentation/devicetree/bindings/power/supply/ti,lp8727.yaml b/Documentation/devicetree/bindings/power/supply/ti,lp8727.yaml
> index ce6fbdba8f6b..3a9e4310b433 100644
> --- a/Documentation/devicetree/bindings/power/supply/ti,lp8727.yaml
> +++ b/Documentation/devicetree/bindings/power/supply/ti,lp8727.yaml
> @@ -61,7 +61,7 @@ additionalProperties: false
> examples:
> - |
> #include <dt-bindings/interrupt-controller/irq.h>
> - i2c0 {
> + i2c {
> #address-cells = <1>;
> #size-cells = <0>;
>
...
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] dt-bindings: Fix SPI and I2C bus node names in examples
2023-02-28 21:54 [PATCH] dt-bindings: Fix SPI and I2C bus node names in examples Rob Herring
` (5 preceding siblings ...)
2023-03-01 23:43 ` Sebastian Reichel
@ 2023-03-02 16:45 ` Sam Ravnborg
[not found] ` <CANiq72mm9qX8uuS2y_vvtcza2hAgG3zFEy24koQTfSEOWkKDYQ@mail.gmail.com>
` (2 subsequent siblings)
9 siblings, 0 replies; 11+ messages in thread
From: Sam Ravnborg @ 2023-03-02 16:45 UTC (permalink / raw)
To: Rob Herring
Cc: Krzysztof Kozlowski, devicetree, Miguel Ojeda, Benson Leung,
Guenter Roeck, Stephen Boyd, Andrzej Hajda, Neil Armstrong,
Robert Foss, Thierry Reding, MyungJoo Ham, Chanwoo Choi,
Linus Walleij, Bartosz Golaszewski, Pavel Machek, Lee Jones,
Mauro Carvalho Chehab, David S. Miller, Eric Dumazet,
Jakub Kicinski, Paolo Abeni, Wolfgang Grandegger, Kalle Valo,
Sebastian Reichel, Mark Brown, Greg Kroah-Hartman, linux-clk,
dri-devel, linux-gpio, linux-i2c, linux-leds, linux-media,
netdev, linux-can, linux-wireless, linux-pm, alsa-devel,
linux-usb
Hi Rob.
> .../bindings/display/bridge/analogix,anx7625.yaml | 2 +-
> .../bindings/display/bridge/anx6345.yaml | 2 +-
> .../bindings/display/bridge/lontium,lt8912b.yaml | 2 +-
> .../bindings/display/bridge/nxp,ptn3460.yaml | 2 +-
> .../bindings/display/bridge/ps8640.yaml | 2 +-
> .../bindings/display/bridge/sil,sii9234.yaml | 2 +-
> .../bindings/display/bridge/ti,dlpc3433.yaml | 2 +-
> .../bindings/display/bridge/toshiba,tc358762.yaml | 2 +-
> .../bindings/display/bridge/toshiba,tc358768.yaml | 2 +-
> .../bindings/display/panel/nec,nl8048hl11.yaml | 2 +-
Acked-by: Sam Ravnborg <sam@ravnborg.org>
> index 669f70b1b4c4..8bd58913804a 100644
> --- a/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml
> +++ b/Documentation/devicetree/bindings/display/solomon,ssd1307fb.yaml
> @@ -226,7 +226,7 @@ unevaluatedProperties: false
>
> examples:
> - |
> - i2c1 {
> + i2c {
> #address-cells = <1>;
> #size-cells = <0>;
>
> @@ -239,7 +239,7 @@ examples:
>
> ssd1306_i2c: oled@3d {
> compatible = "solomon,ssd1306";
> - reg = <0x3c>;
> + reg = <0x3d>;
> pwms = <&pwm 4 3000>;
> reset-gpios = <&gpio2 7>;
> solomon,com-lrremap;
I can see this align the example with i2c-mux-gpio.yaml so the change
should be fine. I am just positive surprised the tooling caught it.
The change is
Acked-by: Sam Ravnborg <sam@ravnborg.org>
the above was just me thinking loud.
Sam
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] dt-bindings: Fix SPI and I2C bus node names in examples
[not found] ` <CANiq72mm9qX8uuS2y_vvtcza2hAgG3zFEy24koQTfSEOWkKDYQ@mail.gmail.com>
@ 2023-03-06 8:16 ` Robin van der Gracht
0 siblings, 0 replies; 11+ messages in thread
From: Robin van der Gracht @ 2023-03-06 8:16 UTC (permalink / raw)
To: Rob Herring
Cc: devicetree, Miguel Ojeda, Greg Kroah-Hartman, linux-i2c,
linux-gpio, linux-leds, linux-media, netdev, linux-can,
linux-wireless, linux-pm, alsa-devel, linux-usb
> From: Rob Herring <robh@kernel.org>
> Date: Tue, Feb 28, 2023 at 10:54 PM
> Subject: [PATCH] dt-bindings: Fix SPI and I2C bus node names in
> examples
> To: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
> Cc: <devicetree@vger.kernel.org>, Miguel Ojeda <ojeda@kernel.org>,
> Benson Leung <bleung@chromium.org>, Guenter Roeck
> <groeck@chromium.org>, Stephen Boyd <sboyd@kernel.org>, Andrzej Hajda
> <andrzej.hajda@intel.com>, Neil Armstrong <neil.armstrong@linaro.org>,
> Robert Foss <rfoss@kernel.org>, Thierry Reding
> <thierry.reding@gmail.com>, Sam Ravnborg <sam@ravnborg.org>, MyungJoo
> Ham <myungjoo.ham@samsung.com>, Chanwoo Choi <cw00.choi@samsung.com>,
> Linus Walleij <linus.walleij@linaro.org>, Bartosz Golaszewski
> <brgl@bgdev.pl>, Pavel Machek <pavel@ucw.cz>, Lee Jones
> <lee@kernel.org>, Mauro Carvalho Chehab <mchehab@kernel.org>, David S.
> Miller <davem@davemloft.net>, Eric Dumazet <edumazet@google.com>,
> Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
> Wolfgang Grandegger <wg@grandegger.com>, Kalle Valo
> <kvalo@kernel.org>, Sebastian Reichel <sre@kernel.org>, Mark Brown
> <broonie@kernel.org>, Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
> <linux-clk@vger.kernel.org>, <dri-devel@lists.freedesktop.org>,
> <linux-gpio@vger.kernel.org>, <linux-i2c@vger.kernel.org>,
> <linux-leds@vger.kernel.org>, <linux-media@vger.kernel.org>,
> <netdev@vger.kernel.org>, <linux-can@vger.kernel.org>,
> <linux-wireless@vger.kernel.org>, <linux-pm@vger.kernel.org>,
> <alsa-devel@alsa-project.org>, <linux-usb@vger.kernel.org>
>
>
> SPI and I2C bus node names are expected to be "spi" or "i2c",
> respectively, with nothing else, a unit-address, or a '-N' index. A
> pattern of 'spi0' or 'i2c0' or similar has crept in. Fix all these
> cases. Mostly scripted with the following commands:
>
> git grep -l '\si2c[0-9] {' Documentation/devicetree/ | xargs sed -i -e
> 's/i2c[0-9] {/i2c {/'
> git grep -l '\sspi[0-9] {' Documentation/devicetree/ | xargs sed -i -e
> 's/spi[0-9] {/spi {/'
>
> With this, a few errors in examples were exposed and fixed.
>
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
> Cc: Miguel Ojeda <ojeda@kernel.org>
> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
> Cc: Benson Leung <bleung@chromium.org>
> Cc: Guenter Roeck <groeck@chromium.org>
> Cc: Stephen Boyd <sboyd@kernel.org>
> Cc: Andrzej Hajda <andrzej.hajda@intel.com>
> Cc: Neil Armstrong <neil.armstrong@linaro.org>
> Cc: Robert Foss <rfoss@kernel.org>
> Cc: Thierry Reding <thierry.reding@gmail.com>
> Cc: Sam Ravnborg <sam@ravnborg.org>
> Cc: MyungJoo Ham <myungjoo.ham@samsung.com>
> Cc: Chanwoo Choi <cw00.choi@samsung.com>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: Bartosz Golaszewski <brgl@bgdev.pl>
> Cc: Pavel Machek <pavel@ucw.cz>
> Cc: Lee Jones <lee@kernel.org>
> Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
> Cc: "David S. Miller" <davem@davemloft.net>
> Cc: Eric Dumazet <edumazet@google.com>
> Cc: Jakub Kicinski <kuba@kernel.org>
> Cc: Paolo Abeni <pabeni@redhat.com>
> Cc: Wolfgang Grandegger <wg@grandegger.com>
> Cc: Kalle Valo <kvalo@kernel.org>
> Cc: Sebastian Reichel <sre@kernel.org>
> Cc: Mark Brown <broonie@kernel.org>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: linux-clk@vger.kernel.org
> Cc: dri-devel@lists.freedesktop.org
> Cc: linux-gpio@vger.kernel.org
> Cc: linux-i2c@vger.kernel.org
> Cc: linux-leds@vger.kernel.org
> Cc: linux-media@vger.kernel.org
> Cc: netdev@vger.kernel.org
> Cc: linux-can@vger.kernel.org
> Cc: linux-wireless@vger.kernel.org
> Cc: linux-pm@vger.kernel.org
> Cc: alsa-devel@alsa-project.org
> Cc: linux-usb@vger.kernel.org
> ---
> .../bindings/auxdisplay/holtek,ht16k33.yaml | 2 +-
....
> 86 files changed, 110 insertions(+), 103 deletions(-)
>
> diff --git
> a/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
> b/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
> index fc4873deb76f..286e726cd052 100644
> --- a/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
> +++ b/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
> @@ -72,7 +72,7 @@ examples:
> #include <dt-bindings/interrupt-controller/irq.h>
> #include <dt-bindings/input/input.h>
> #include <dt-bindings/leds/common.h>
> - i2c1 {
> + i2c {
> #address-cells = <1>;
> #size-cells = <0>;
Acked-by: Robin van der Gracht <robin@protonic.nl>
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] dt-bindings: Fix SPI and I2C bus node names in examples
2023-02-28 21:54 [PATCH] dt-bindings: Fix SPI and I2C bus node names in examples Rob Herring
` (7 preceding siblings ...)
[not found] ` <CANiq72mm9qX8uuS2y_vvtcza2hAgG3zFEy24koQTfSEOWkKDYQ@mail.gmail.com>
@ 2023-03-06 9:26 ` Bartosz Golaszewski
2023-03-08 14:10 ` Rob Herring
9 siblings, 0 replies; 11+ messages in thread
From: Bartosz Golaszewski @ 2023-03-06 9:26 UTC (permalink / raw)
To: Rob Herring
Cc: Krzysztof Kozlowski, devicetree, Miguel Ojeda, Benson Leung,
Guenter Roeck, Stephen Boyd, Andrzej Hajda, Neil Armstrong,
Robert Foss, Thierry Reding, Sam Ravnborg, MyungJoo Ham,
Chanwoo Choi, Linus Walleij, Pavel Machek, Lee Jones,
Mauro Carvalho Chehab, David S. Miller, Eric Dumazet,
Jakub Kicinski, Paolo Abeni, Wolfgang Grandegger, Kalle Valo,
Sebastian Reichel, Mark Brown, Greg Kroah-Hartman, linux-clk,
dri-devel, linux-gpio, linux-i2c, linux-leds, linux-media,
netdev, linux-can, linux-wireless, linux-pm, alsa-devel,
linux-usb
On Tue, Feb 28, 2023 at 10:54 PM Rob Herring <robh@kernel.org> wrote:
>
> SPI and I2C bus node names are expected to be "spi" or "i2c",
> respectively, with nothing else, a unit-address, or a '-N' index. A
> pattern of 'spi0' or 'i2c0' or similar has crept in. Fix all these
> cases. Mostly scripted with the following commands:
>
> git grep -l '\si2c[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/i2c[0-9] {/i2c {/'
> git grep -l '\sspi[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/spi[0-9] {/spi {/'
>
> With this, a few errors in examples were exposed and fixed.
>
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
> Cc: Miguel Ojeda <ojeda@kernel.org>
> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
> Cc: Benson Leung <bleung@chromium.org>
> Cc: Guenter Roeck <groeck@chromium.org>
> Cc: Stephen Boyd <sboyd@kernel.org>
> Cc: Andrzej Hajda <andrzej.hajda@intel.com>
> Cc: Neil Armstrong <neil.armstrong@linaro.org>
> Cc: Robert Foss <rfoss@kernel.org>
> Cc: Thierry Reding <thierry.reding@gmail.com>
> Cc: Sam Ravnborg <sam@ravnborg.org>
> Cc: MyungJoo Ham <myungjoo.ham@samsung.com>
> Cc: Chanwoo Choi <cw00.choi@samsung.com>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: Bartosz Golaszewski <brgl@bgdev.pl>
> Cc: Pavel Machek <pavel@ucw.cz>
> Cc: Lee Jones <lee@kernel.org>
> Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
> Cc: "David S. Miller" <davem@davemloft.net>
> Cc: Eric Dumazet <edumazet@google.com>
> Cc: Jakub Kicinski <kuba@kernel.org>
> Cc: Paolo Abeni <pabeni@redhat.com>
> Cc: Wolfgang Grandegger <wg@grandegger.com>
> Cc: Kalle Valo <kvalo@kernel.org>
> Cc: Sebastian Reichel <sre@kernel.org>
> Cc: Mark Brown <broonie@kernel.org>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: linux-clk@vger.kernel.org
> Cc: dri-devel@lists.freedesktop.org
> Cc: linux-gpio@vger.kernel.org
> Cc: linux-i2c@vger.kernel.org
> Cc: linux-leds@vger.kernel.org
> Cc: linux-media@vger.kernel.org
> Cc: netdev@vger.kernel.org
> Cc: linux-can@vger.kernel.org
> Cc: linux-wireless@vger.kernel.org
> Cc: linux-pm@vger.kernel.org
> Cc: alsa-devel@alsa-project.org
> Cc: linux-usb@vger.kernel.org
> ---
> .../bindings/auxdisplay/holtek,ht16k33.yaml | 2 +-
> .../bindings/chrome/google,cros-ec-typec.yaml | 2 +-
> .../chrome/google,cros-kbd-led-backlight.yaml | 2 +-
> .../devicetree/bindings/clock/ti,lmk04832.yaml | 2 +-
> .../bindings/display/bridge/analogix,anx7625.yaml | 2 +-
> .../bindings/display/bridge/anx6345.yaml | 2 +-
> .../bindings/display/bridge/lontium,lt8912b.yaml | 2 +-
> .../bindings/display/bridge/nxp,ptn3460.yaml | 2 +-
> .../bindings/display/bridge/ps8640.yaml | 2 +-
> .../bindings/display/bridge/sil,sii9234.yaml | 2 +-
> .../bindings/display/bridge/ti,dlpc3433.yaml | 2 +-
> .../bindings/display/bridge/toshiba,tc358762.yaml | 2 +-
> .../bindings/display/bridge/toshiba,tc358768.yaml | 2 +-
> .../bindings/display/panel/nec,nl8048hl11.yaml | 2 +-
> .../bindings/display/solomon,ssd1307fb.yaml | 4 ++--
> .../devicetree/bindings/eeprom/at25.yaml | 2 +-
> .../bindings/extcon/extcon-usbc-cros-ec.yaml | 2 +-
> .../bindings/extcon/extcon-usbc-tusb320.yaml | 2 +-
> .../devicetree/bindings/gpio/gpio-pca9570.yaml | 2 +-
> .../devicetree/bindings/gpio/gpio-pca95xx.yaml | 8 ++++----
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH] dt-bindings: Fix SPI and I2C bus node names in examples
2023-02-28 21:54 [PATCH] dt-bindings: Fix SPI and I2C bus node names in examples Rob Herring
` (8 preceding siblings ...)
2023-03-06 9:26 ` Bartosz Golaszewski
@ 2023-03-08 14:10 ` Rob Herring
9 siblings, 0 replies; 11+ messages in thread
From: Rob Herring @ 2023-03-08 14:10 UTC (permalink / raw)
To: Rob Herring
Cc: Pavel Machek, Neil Armstrong, devicetree, linux-wireless,
Andrzej Hajda, linux-leds, Paolo Abeni, Greg Kroah-Hartman,
linux-pm, linux-media, Krzysztof Kozlowski, linux-gpio,
Miguel Ojeda, Lee Jones, Kalle Valo, Bartosz Golaszewski,
linux-usb, David S. Miller, alsa-devel, netdev, Linus Walleij,
MyungJoo Ham, Jakub Kicinski, Mauro Carvalho Chehab, linux-clk,
dri-devel, Chanwoo Choi, Eric Dumazet, Mark Brown, Robert Foss,
Sebastian Reichel, linux-can, Guenter Roeck, Stephen Boyd,
Thierry Reding, Sam Ravnborg, Benson Leung, linux-i2c,
Wolfgang Grandegger
On Tue, 28 Feb 2023 15:54:33 -0600, Rob Herring wrote:
> SPI and I2C bus node names are expected to be "spi" or "i2c",
> respectively, with nothing else, a unit-address, or a '-N' index. A
> pattern of 'spi0' or 'i2c0' or similar has crept in. Fix all these
> cases. Mostly scripted with the following commands:
>
> git grep -l '\si2c[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/i2c[0-9] {/i2c {/'
> git grep -l '\sspi[0-9] {' Documentation/devicetree/ | xargs sed -i -e 's/spi[0-9] {/spi {/'
>
> With this, a few errors in examples were exposed and fixed.
>
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
> Cc: Miguel Ojeda <ojeda@kernel.org>
> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
> Cc: Benson Leung <bleung@chromium.org>
> Cc: Guenter Roeck <groeck@chromium.org>
> Cc: Stephen Boyd <sboyd@kernel.org>
> Cc: Andrzej Hajda <andrzej.hajda@intel.com>
> Cc: Neil Armstrong <neil.armstrong@linaro.org>
> Cc: Robert Foss <rfoss@kernel.org>
> Cc: Thierry Reding <thierry.reding@gmail.com>
> Cc: Sam Ravnborg <sam@ravnborg.org>
> Cc: MyungJoo Ham <myungjoo.ham@samsung.com>
> Cc: Chanwoo Choi <cw00.choi@samsung.com>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: Bartosz Golaszewski <brgl@bgdev.pl>
> Cc: Pavel Machek <pavel@ucw.cz>
> Cc: Lee Jones <lee@kernel.org>
> Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
> Cc: "David S. Miller" <davem@davemloft.net>
> Cc: Eric Dumazet <edumazet@google.com>
> Cc: Jakub Kicinski <kuba@kernel.org>
> Cc: Paolo Abeni <pabeni@redhat.com>
> Cc: Wolfgang Grandegger <wg@grandegger.com>
> Cc: Kalle Valo <kvalo@kernel.org>
> Cc: Sebastian Reichel <sre@kernel.org>
> Cc: Mark Brown <broonie@kernel.org>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: linux-clk@vger.kernel.org
> Cc: dri-devel@lists.freedesktop.org
> Cc: linux-gpio@vger.kernel.org
> Cc: linux-i2c@vger.kernel.org
> Cc: linux-leds@vger.kernel.org
> Cc: linux-media@vger.kernel.org
> Cc: netdev@vger.kernel.org
> Cc: linux-can@vger.kernel.org
> Cc: linux-wireless@vger.kernel.org
> Cc: linux-pm@vger.kernel.org
> Cc: alsa-devel@alsa-project.org
> Cc: linux-usb@vger.kernel.org
> ---
> .../bindings/auxdisplay/holtek,ht16k33.yaml | 2 +-
> .../bindings/chrome/google,cros-ec-typec.yaml | 2 +-
> .../chrome/google,cros-kbd-led-backlight.yaml | 2 +-
> .../devicetree/bindings/clock/ti,lmk04832.yaml | 2 +-
> .../bindings/display/bridge/analogix,anx7625.yaml | 2 +-
> .../bindings/display/bridge/anx6345.yaml | 2 +-
> .../bindings/display/bridge/lontium,lt8912b.yaml | 2 +-
> .../bindings/display/bridge/nxp,ptn3460.yaml | 2 +-
> .../bindings/display/bridge/ps8640.yaml | 2 +-
> .../bindings/display/bridge/sil,sii9234.yaml | 2 +-
> .../bindings/display/bridge/ti,dlpc3433.yaml | 2 +-
> .../bindings/display/bridge/toshiba,tc358762.yaml | 2 +-
> .../bindings/display/bridge/toshiba,tc358768.yaml | 2 +-
> .../bindings/display/panel/nec,nl8048hl11.yaml | 2 +-
> .../bindings/display/solomon,ssd1307fb.yaml | 4 ++--
> .../devicetree/bindings/eeprom/at25.yaml | 2 +-
> .../bindings/extcon/extcon-usbc-cros-ec.yaml | 2 +-
> .../bindings/extcon/extcon-usbc-tusb320.yaml | 2 +-
> .../devicetree/bindings/gpio/gpio-pca9570.yaml | 2 +-
> .../devicetree/bindings/gpio/gpio-pca95xx.yaml | 8 ++++----
> .../bindings/i2c/google,cros-ec-i2c-tunnel.yaml | 2 +-
> .../bindings/leds/cznic,turris-omnia-leds.yaml | 2 +-
> .../devicetree/bindings/leds/issi,is31fl319x.yaml | 2 +-
> .../devicetree/bindings/leds/leds-aw2013.yaml | 2 +-
> .../devicetree/bindings/leds/leds-rt4505.yaml | 2 +-
> .../devicetree/bindings/leds/ti,tca6507.yaml | 2 +-
> .../bindings/media/i2c/aptina,mt9p031.yaml | 2 +-
> .../bindings/media/i2c/aptina,mt9v111.yaml | 2 +-
> .../devicetree/bindings/media/i2c/imx219.yaml | 2 +-
> .../devicetree/bindings/media/i2c/imx258.yaml | 4 ++--
> .../devicetree/bindings/media/i2c/mipi-ccs.yaml | 2 +-
> .../bindings/media/i2c/ovti,ov5648.yaml | 2 +-
> .../bindings/media/i2c/ovti,ov772x.yaml | 2 +-
> .../bindings/media/i2c/ovti,ov8865.yaml | 2 +-
> .../bindings/media/i2c/ovti,ov9282.yaml | 2 +-
> .../bindings/media/i2c/rda,rda5807.yaml | 2 +-
> .../bindings/media/i2c/sony,imx214.yaml | 2 +-
> .../bindings/media/i2c/sony,imx274.yaml | 2 +-
> .../bindings/media/i2c/sony,imx334.yaml | 2 +-
> .../bindings/media/i2c/sony,imx335.yaml | 2 +-
> .../bindings/media/i2c/sony,imx412.yaml | 2 +-
> .../devicetree/bindings/mfd/actions,atc260x.yaml | 2 +-
> .../devicetree/bindings/mfd/google,cros-ec.yaml | 6 +++---
> .../devicetree/bindings/mfd/ti,tps65086.yaml | 2 +-
> .../devicetree/bindings/mfd/x-powers,axp152.yaml | 4 ++--
> .../devicetree/bindings/net/asix,ax88796c.yaml | 2 +-
> .../bindings/net/can/microchip,mcp251xfd.yaml | 2 +-
> .../bindings/net/dsa/microchip,ksz.yaml | 2 +-
> .../bindings/net/nfc/samsung,s3fwrn5.yaml | 2 +-
> .../bindings/net/vertexcom-mse102x.yaml | 2 +-
> .../bindings/net/wireless/ti,wlcore.yaml | 10 ++++++++--
> .../devicetree/bindings/pinctrl/pinmux-node.yaml | 2 +-
> .../bindings/pinctrl/starfive,jh7100-pinctrl.yaml | 2 +-
> .../devicetree/bindings/power/supply/bq2415x.yaml | 2 +-
> .../devicetree/bindings/power/supply/bq24190.yaml | 2 +-
> .../devicetree/bindings/power/supply/bq24257.yaml | 4 ++--
> .../devicetree/bindings/power/supply/bq24735.yaml | 2 +-
> .../devicetree/bindings/power/supply/bq2515x.yaml | 2 +-
> .../devicetree/bindings/power/supply/bq25890.yaml | 2 +-
> .../devicetree/bindings/power/supply/bq25980.yaml | 2 +-
> .../devicetree/bindings/power/supply/bq27xxx.yaml | 15 ++++++++-------
> .../bindings/power/supply/lltc,ltc294x.yaml | 2 +-
> .../bindings/power/supply/ltc4162-l.yaml | 2 +-
> .../bindings/power/supply/maxim,max14656.yaml | 2 +-
> .../bindings/power/supply/maxim,max17040.yaml | 4 ++--
> .../bindings/power/supply/maxim,max17042.yaml | 2 +-
> .../bindings/power/supply/richtek,rt9455.yaml | 2 +-
> .../bindings/power/supply/ti,lp8727.yaml | 2 +-
> .../bindings/regulator/active-semi,act8865.yaml | 2 +-
> .../regulator/google,cros-ec-regulator.yaml | 2 +-
> .../bindings/regulator/nxp,pf8x00-regulator.yaml | 2 +-
> .../devicetree/bindings/sound/everest,es8316.yaml | 2 +-
> .../devicetree/bindings/sound/tas2562.yaml | 2 +-
> .../devicetree/bindings/sound/tas2770.yaml | 2 +-
> .../devicetree/bindings/sound/tas27xx.yaml | 2 +-
> .../devicetree/bindings/sound/tas5805m.yaml | 2 +-
> .../devicetree/bindings/sound/tlv320adcx140.yaml | 2 +-
> .../devicetree/bindings/sound/zl38060.yaml | 2 +-
> .../devicetree/bindings/usb/maxim,max33359.yaml | 2 +-
> .../bindings/usb/maxim,max3420-udc.yaml | 2 +-
> .../bindings/usb/mediatek,mt6360-tcpc.yaml | 2 +-
> .../devicetree/bindings/usb/richtek,rt1711h.yaml | 2 +-
> .../devicetree/bindings/usb/richtek,rt1719.yaml | 2 +-
> .../devicetree/bindings/usb/st,stusb160x.yaml | 2 +-
> .../devicetree/bindings/usb/ti,hd3ss3220.yaml | 2 +-
> .../devicetree/bindings/usb/ti,tps6598x.yaml | 2 +-
> 86 files changed, 110 insertions(+), 103 deletions(-)
>
Applied, thanks!
^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2023-03-08 14:12 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-02-28 21:54 [PATCH] dt-bindings: Fix SPI and I2C bus node names in examples Rob Herring
2023-02-28 21:58 ` Mark Brown
2023-03-01 6:51 ` Wolfram Sang
2023-03-01 7:42 ` Marc Kleine-Budde
2023-03-01 8:52 ` Lee Jones
2023-03-01 14:45 ` Simon Glass
2023-03-01 23:43 ` Sebastian Reichel
2023-03-02 16:45 ` Sam Ravnborg
[not found] ` <CANiq72mm9qX8uuS2y_vvtcza2hAgG3zFEy24koQTfSEOWkKDYQ@mail.gmail.com>
2023-03-06 8:16 ` Robin van der Gracht
2023-03-06 9:26 ` Bartosz Golaszewski
2023-03-08 14:10 ` Rob Herring
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).