* [PATCH net-next v2 0/3] TSN endpoint Ethernet MAC driver
@ 2021-08-31 19:34 Gerhard Engleder
2021-08-31 19:34 ` [PATCH net-next v2 1/3] dt-bindings: Add vendor prefix for Engleder Gerhard Engleder
` (2 more replies)
0 siblings, 3 replies; 16+ messages in thread
From: Gerhard Engleder @ 2021-08-31 19:34 UTC (permalink / raw)
To: davem, kuba, andrew, robh+dt, michal.simek
Cc: netdev, devicetree, Gerhard Engleder
This series adds a driver for my FPGA based TSN endpoint Ethernet MAC.
It also includes the device tree binding.
The device is designed as Ethernet MAC for TSN networks. It will be used
in PLCs with real-time requirements up to isochronous communication with
protocols like OPC UA Pub/Sub.
I'm looking forward to your comments!
v2:
- add C45 check (Andrew Lunn)
- forward phy_connect_direct() return value (Andrew Lunn)
- use phy_remove_link_mode() (Andrew Lunn)
- do not touch PHY directly, use PHY subsystem (Andrew Lunn)
- remove management data lock (Andrew Lunn)
- use phy_loopback (Andrew Lunn)
- remove GMII2RGMII handling, use xgmiitorgmii (Andrew Lunn)
- remove char device for direct TX/RX queue access (Andrew Lunn)
- mdio node for mdiobus (Rob Herring)
- simplify compatible node (Rob Herring)
- limit number of items of reg and interrupts nodes (Rob Herring)
- restrict phy-connection-type node (Rob Herring)
- reference to mdio.yaml under mdio node (Rob Herring)
- remove device tree (Michal Simek)
- fix %llx warning (kernel test robot)
- fix unused tmp variable warning (kernel test robot)
- add missing of_node_put() for of_parse_phandle()
- use devm_mdiobus_alloc()
- simplify mdiobus read/write
- reduce required nodes
- ethtool priv flags interface for loopback
- add missing static for some functions
- remove obsolete hardware defines
Gerhard Engleder (3):
dt-bindings: Add vendor prefix for Engleder
dt-bindings: net: Add tsnep Ethernet controller
tsnep: Add TSN endpoint Ethernet MAC driver
.../bindings/net/engleder,tsnep.yaml | 78 ++
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
drivers/net/ethernet/Kconfig | 1 +
drivers/net/ethernet/Makefile | 1 +
drivers/net/ethernet/engleder/Kconfig | 28 +
drivers/net/ethernet/engleder/Makefile | 9 +
drivers/net/ethernet/engleder/tsnep.h | 166 +++
drivers/net/ethernet/engleder/tsnep_ethtool.c | 382 +++++
drivers/net/ethernet/engleder/tsnep_hw.h | 236 ++++
drivers/net/ethernet/engleder/tsnep_main.c | 1227 +++++++++++++++++
drivers/net/ethernet/engleder/tsnep_ptp.c | 221 +++
drivers/net/ethernet/engleder/tsnep_tc.c | 442 ++++++
drivers/net/ethernet/engleder/tsnep_test.c | 811 +++++++++++
13 files changed, 3604 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/engleder,tsnep.yaml
create mode 100644 drivers/net/ethernet/engleder/Kconfig
create mode 100644 drivers/net/ethernet/engleder/Makefile
create mode 100644 drivers/net/ethernet/engleder/tsnep.h
create mode 100644 drivers/net/ethernet/engleder/tsnep_ethtool.c
create mode 100644 drivers/net/ethernet/engleder/tsnep_hw.h
create mode 100644 drivers/net/ethernet/engleder/tsnep_main.c
create mode 100644 drivers/net/ethernet/engleder/tsnep_ptp.c
create mode 100644 drivers/net/ethernet/engleder/tsnep_tc.c
create mode 100644 drivers/net/ethernet/engleder/tsnep_test.c
--
2.20.1
^ permalink raw reply [flat|nested] 16+ messages in thread* [PATCH net-next v2 1/3] dt-bindings: Add vendor prefix for Engleder 2021-08-31 19:34 [PATCH net-next v2 0/3] TSN endpoint Ethernet MAC driver Gerhard Engleder @ 2021-08-31 19:34 ` Gerhard Engleder 2021-09-01 12:32 ` Rob Herring 2021-08-31 19:34 ` [PATCH net-next v2 2/3] dt-bindings: net: Add tsnep Ethernet controller Gerhard Engleder 2021-08-31 19:34 ` [PATCH net-next v2 3/3] tsnep: Add TSN endpoint Ethernet MAC driver Gerhard Engleder 2 siblings, 1 reply; 16+ messages in thread From: Gerhard Engleder @ 2021-08-31 19:34 UTC (permalink / raw) To: davem, kuba, andrew, robh+dt, michal.simek Cc: netdev, devicetree, Gerhard Engleder Engleder develops FPGA based controllers for real-time communication. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> --- Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 07fb0d25fc15..d5cd33d33c73 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -367,6 +367,8 @@ patternProperties: description: Silicon Laboratories (formerly Energy Micro AS) "^engicam,.*": description: Engicam S.r.l. + "^engleder,.*": + description: Engleder "^epcos,.*": description: EPCOS AG "^epfl,.*": -- 2.20.1 ^ permalink raw reply related [flat|nested] 16+ messages in thread
* Re: [PATCH net-next v2 1/3] dt-bindings: Add vendor prefix for Engleder 2021-08-31 19:34 ` [PATCH net-next v2 1/3] dt-bindings: Add vendor prefix for Engleder Gerhard Engleder @ 2021-09-01 12:32 ` Rob Herring 0 siblings, 0 replies; 16+ messages in thread From: Rob Herring @ 2021-09-01 12:32 UTC (permalink / raw) To: Gerhard Engleder Cc: michal.simek, davem, netdev, andrew, devicetree, robh+dt, kuba On Tue, 31 Aug 2021 21:34:23 +0200, Gerhard Engleder wrote: > Engleder develops FPGA based controllers for real-time communication. > > Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> > --- > Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ > 1 file changed, 2 insertions(+) > Acked-by: Rob Herring <robh@kernel.org> ^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH net-next v2 2/3] dt-bindings: net: Add tsnep Ethernet controller 2021-08-31 19:34 [PATCH net-next v2 0/3] TSN endpoint Ethernet MAC driver Gerhard Engleder 2021-08-31 19:34 ` [PATCH net-next v2 1/3] dt-bindings: Add vendor prefix for Engleder Gerhard Engleder @ 2021-08-31 19:34 ` Gerhard Engleder 2021-09-01 12:33 ` Rob Herring 2021-08-31 19:34 ` [PATCH net-next v2 3/3] tsnep: Add TSN endpoint Ethernet MAC driver Gerhard Engleder 2 siblings, 1 reply; 16+ messages in thread From: Gerhard Engleder @ 2021-08-31 19:34 UTC (permalink / raw) To: davem, kuba, andrew, robh+dt, michal.simek Cc: netdev, devicetree, Gerhard Engleder The TSN endpoint Ethernet MAC is a FPGA based network device for real-time communication. It is integrated as normal Ethernet controller with ethernet-controller.yaml and mdio.yaml. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> --- .../bindings/net/engleder,tsnep.yaml | 78 +++++++++++++++++++ 1 file changed, 78 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/engleder,tsnep.yaml diff --git a/Documentation/devicetree/bindings/net/engleder,tsnep.yaml b/Documentation/devicetree/bindings/net/engleder,tsnep.yaml new file mode 100644 index 000000000000..962ce75dab07 --- /dev/null +++ b/Documentation/devicetree/bindings/net/engleder,tsnep.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/engleder,tsnep.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TSN endpoint Ethernet MAC binding + +maintainers: + - Gerhard Engleder <gerhard@engleder-embedded.com> + +allOf: + - $ref: ethernet-controller.yaml# + +properties: + compatible: + const: engleder,tsnep + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + local-mac-address: true + + mac-address: true + + nvmem-cells: true + + nvmem-cells-names: true + + phy-connection-type: + enum: + - mii + - gmii + - rgmii + - rgmii-id + + phy-mode: true + + phy-handle: true + + mdio: + type: object + $ref: "mdio.yaml#" + description: optional node for embedded MDIO controller + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + axi { + #address-cells = <2>; + #size-cells = <2>; + tnsep0: ethernet@a0000000 { + compatible = "engleder,tsnep"; + reg = <0x0 0xa0000000 0x0 0x10000>; + interrupts = <0 89 1>; + interrupt-parent = <&gic>; + local-mac-address = [00 00 00 00 00 00]; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + mdio { + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@1 { + reg = <1>; + rxc-skew-ps = <1080>; + }; + }; + }; + }; -- 2.20.1 ^ permalink raw reply related [flat|nested] 16+ messages in thread
* Re: [PATCH net-next v2 2/3] dt-bindings: net: Add tsnep Ethernet controller 2021-08-31 19:34 ` [PATCH net-next v2 2/3] dt-bindings: net: Add tsnep Ethernet controller Gerhard Engleder @ 2021-09-01 12:33 ` Rob Herring 0 siblings, 0 replies; 16+ messages in thread From: Rob Herring @ 2021-09-01 12:33 UTC (permalink / raw) To: Gerhard Engleder Cc: devicetree, robh+dt, kuba, netdev, andrew, michal.simek, davem On Tue, 31 Aug 2021 21:34:24 +0200, Gerhard Engleder wrote: > The TSN endpoint Ethernet MAC is a FPGA based network device for > real-time communication. > > It is integrated as normal Ethernet controller with > ethernet-controller.yaml and mdio.yaml. > > Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> > --- > .../bindings/net/engleder,tsnep.yaml | 78 +++++++++++++++++++ > 1 file changed, 78 insertions(+) > create mode 100644 Documentation/devicetree/bindings/net/engleder,tsnep.yaml > Reviewed-by: Rob Herring <robh@kernel.org> ^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH net-next v2 3/3] tsnep: Add TSN endpoint Ethernet MAC driver 2021-08-31 19:34 [PATCH net-next v2 0/3] TSN endpoint Ethernet MAC driver Gerhard Engleder 2021-08-31 19:34 ` [PATCH net-next v2 1/3] dt-bindings: Add vendor prefix for Engleder Gerhard Engleder 2021-08-31 19:34 ` [PATCH net-next v2 2/3] dt-bindings: net: Add tsnep Ethernet controller Gerhard Engleder @ 2021-08-31 19:34 ` Gerhard Engleder 2021-08-31 21:55 ` Andrew Lunn ` (2 more replies) 2 siblings, 3 replies; 16+ messages in thread From: Gerhard Engleder @ 2021-08-31 19:34 UTC (permalink / raw) To: davem, kuba, andrew, robh+dt, michal.simek Cc: netdev, devicetree, Gerhard Engleder The TSN endpoint Ethernet MAC is a FPGA based network device for real-time communication. It is integrated as Ethernet controller with ethtool and PTP support. For real-time communcation TC_SETUP_QDISC_TAPRIO is supported. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> --- drivers/net/ethernet/Kconfig | 1 + drivers/net/ethernet/Makefile | 1 + drivers/net/ethernet/engleder/Kconfig | 28 + drivers/net/ethernet/engleder/Makefile | 9 + drivers/net/ethernet/engleder/tsnep.h | 166 +++ drivers/net/ethernet/engleder/tsnep_ethtool.c | 382 +++++ drivers/net/ethernet/engleder/tsnep_hw.h | 236 ++++ drivers/net/ethernet/engleder/tsnep_main.c | 1227 +++++++++++++++++ drivers/net/ethernet/engleder/tsnep_ptp.c | 221 +++ drivers/net/ethernet/engleder/tsnep_tc.c | 442 ++++++ drivers/net/ethernet/engleder/tsnep_test.c | 811 +++++++++++ 11 files changed, 3524 insertions(+) create mode 100644 drivers/net/ethernet/engleder/Kconfig create mode 100644 drivers/net/ethernet/engleder/Makefile create mode 100644 drivers/net/ethernet/engleder/tsnep.h create mode 100644 drivers/net/ethernet/engleder/tsnep_ethtool.c create mode 100644 drivers/net/ethernet/engleder/tsnep_hw.h create mode 100644 drivers/net/ethernet/engleder/tsnep_main.c create mode 100644 drivers/net/ethernet/engleder/tsnep_ptp.c create mode 100644 drivers/net/ethernet/engleder/tsnep_tc.c create mode 100644 drivers/net/ethernet/engleder/tsnep_test.c diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig index d796684ec9ca..fca54a767e46 100644 --- a/drivers/net/ethernet/Kconfig +++ b/drivers/net/ethernet/Kconfig @@ -72,6 +72,7 @@ config DNET source "drivers/net/ethernet/dec/Kconfig" source "drivers/net/ethernet/dlink/Kconfig" source "drivers/net/ethernet/emulex/Kconfig" +source "drivers/net/ethernet/engleder/Kconfig" source "drivers/net/ethernet/ezchip/Kconfig" source "drivers/net/ethernet/faraday/Kconfig" source "drivers/net/ethernet/freescale/Kconfig" diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile index aaa5078cd7d1..960ca1f58f46 100644 --- a/drivers/net/ethernet/Makefile +++ b/drivers/net/ethernet/Makefile @@ -35,6 +35,7 @@ obj-$(CONFIG_DNET) += dnet.o obj-$(CONFIG_NET_VENDOR_DEC) += dec/ obj-$(CONFIG_NET_VENDOR_DLINK) += dlink/ obj-$(CONFIG_NET_VENDOR_EMULEX) += emulex/ +obj-$(CONFIG_NET_VENDOR_ENGLEDER) += engleder/ obj-$(CONFIG_NET_VENDOR_EZCHIP) += ezchip/ obj-$(CONFIG_NET_VENDOR_FARADAY) += faraday/ obj-$(CONFIG_NET_VENDOR_FREESCALE) += freescale/ diff --git a/drivers/net/ethernet/engleder/Kconfig b/drivers/net/ethernet/engleder/Kconfig new file mode 100644 index 000000000000..d5d58dd5874b --- /dev/null +++ b/drivers/net/ethernet/engleder/Kconfig @@ -0,0 +1,28 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Engleder network device configuration +# + +config NET_VENDOR_ENGLEDER + bool "Engleder devices" + default y + help + If you have a network (Ethernet) card belonging to this class, say Y. + + Note that the answer to this question doesn't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about Engleder devices. If you say Y, you will be asked + for your specific card in the following questions. + +if NET_VENDOR_ENGLEDER + +config TSNEP + tristate "TSN endpoint support" + select PHYLIB + help + Support for the Engleder TSN endpoint Ethernet MAC IP Core. + + To compile this driver as a module, choose M here. The module will be + called tsnep. + +endif # NET_VENDOR_ENGLEDER diff --git a/drivers/net/ethernet/engleder/Makefile b/drivers/net/ethernet/engleder/Makefile new file mode 100644 index 000000000000..fbaecbfb0944 --- /dev/null +++ b/drivers/net/ethernet/engleder/Makefile @@ -0,0 +1,9 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Makefile for the Engleder Ethernet drivers +# + +obj-$(CONFIG_TSNEP) += tsnep.o + +tsnep-objs := tsnep_main.o tsnep_ethtool.o tsnep_ptp.o tsnep_tc.o \ + tsnep_test.o diff --git a/drivers/net/ethernet/engleder/tsnep.h b/drivers/net/ethernet/engleder/tsnep.h new file mode 100644 index 000000000000..4ebe3d6edb1c --- /dev/null +++ b/drivers/net/ethernet/engleder/tsnep.h @@ -0,0 +1,166 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright (C) 2021 Gerhard Engleder <gerhard@engleder-embedded.com> */ + +#ifndef _TSNEP_H +#define _TSNEP_H + +#include "tsnep_hw.h" + +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> +#include <linux/etherdevice.h> +#include <linux/phy.h> +#include <linux/ethtool.h> +#include <linux/net_tstamp.h> +#include <linux/ptp_clock_kernel.h> +#include <linux/miscdevice.h> + +#define TSNEP "tsnep" + +#define TSNEP_RING_SIZE 256 +#define TSNEP_RING_ENTRIES_PER_PAGE (PAGE_SIZE / TSNEP_DESC_SIZE) +#define TSNEP_RING_PAGE_COUNT (TSNEP_RING_SIZE / TSNEP_RING_ENTRIES_PER_PAGE) + +#define TSNEP_QUEUES 1 + +struct tsnep_gcl { + void *addr; + + u64 base_time; + u64 cycle_time; + u64 cycle_time_extension; + + struct tsnep_gcl_operation operation[TSNEP_GCL_COUNT]; + int count; + + u64 change_limit; + + u64 start_time; + bool change; +}; + +struct tsnep_tx_entry { + struct tsnep_tx_desc *desc; + struct tsnep_tx_desc_wb *desc_wb; + dma_addr_t desc_dma; + bool owner_user_flag; + + u32 properties; + + struct sk_buff *skb; + DEFINE_DMA_UNMAP_ADDR(dma); + DEFINE_DMA_UNMAP_LEN(len); +}; + +struct tsnep_tx { + struct tsnep_adapter *adapter; + void *addr; + + void *page[TSNEP_RING_PAGE_COUNT]; + dma_addr_t page_dma[TSNEP_RING_PAGE_COUNT]; + + /* TX ring lock */ + spinlock_t lock; + struct tsnep_tx_entry entry[TSNEP_RING_SIZE]; + int write; + int read; + u32 owner_counter; + int increment_owner_counter; + + u32 packets; + u32 bytes; + u32 dropped; +}; + +struct tsnep_rx_entry { + struct tsnep_rx_desc *desc; + struct tsnep_rx_desc_wb *desc_wb; + dma_addr_t desc_dma; + + u32 properties; + + struct sk_buff *skb; + DEFINE_DMA_UNMAP_ADDR(dma); + DEFINE_DMA_UNMAP_LEN(len); +}; + +struct tsnep_rx { + struct tsnep_adapter *adapter; + void *addr; + + void *page[TSNEP_RING_PAGE_COUNT]; + dma_addr_t page_dma[TSNEP_RING_PAGE_COUNT]; + + struct tsnep_rx_entry entry[TSNEP_RING_SIZE]; + int read; + u32 owner_counter; + int increment_owner_counter; + + u32 packets; + u32 bytes; + u32 dropped; + u32 multicast; +}; + +struct tsnep_adapter { + struct net_device *netdev; + u8 mac_address[ETH_ALEN]; + struct mii_bus *mdiobus; + phy_interface_t phy_mode; + struct phy_device *phydev; + int msg_enable; + + struct platform_device *pdev; + void *addr; + unsigned long size; + int irq; + + /* interrupt enable lock */ + spinlock_t irq_lock; + u32 irq_enable; + + wait_queue_head_t md_wait; + bool md_active; + + bool gate_control; + /* gate control lock */ + struct mutex gate_control_lock; + bool gate_control_active; + struct tsnep_gcl gcl[2]; + int next_gcl; + + struct hwtstamp_config hwtstamp_config; + struct ptp_clock *ptp_clock; + struct ptp_clock_info ptp_clock_info; + /* ptp clock lock */ + spinlock_t ptp_lock; + + int num_tx_queues; + struct tsnep_tx tx[TSNEP_MAX_QUEUES]; + int num_rx_queues; + struct tsnep_rx rx[TSNEP_MAX_QUEUES]; + + struct napi_struct napi; + + int loopback; +}; + +extern const struct ethtool_ops tsnep_ethtool_ops; + +int tsnep_ptp_init(struct tsnep_adapter *adapter); +void tsnep_ptp_cleanup(struct tsnep_adapter *adapter); +int tsnep_ptp_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd); + +int tsnep_tc_init(struct tsnep_adapter *adapter); +void tsnep_tc_cleanup(struct tsnep_adapter *adapter); +int tsnep_tc_setup(struct net_device *netdev, enum tc_setup_type type, + void *type_data); + +int tsnep_ethtool_get_test_count(void); +void tsnep_ethtool_get_test_strings(u8 *data); +void tsnep_ethtool_self_test(struct net_device *netdev, + struct ethtool_test *eth_test, u64 *data); + +void tsnep_get_system_time(struct tsnep_adapter *adapter, u64 *time); + +#endif /* _TSNEP_H */ diff --git a/drivers/net/ethernet/engleder/tsnep_ethtool.c b/drivers/net/ethernet/engleder/tsnep_ethtool.c new file mode 100644 index 000000000000..8332aa5ddad4 --- /dev/null +++ b/drivers/net/ethernet/engleder/tsnep_ethtool.c @@ -0,0 +1,382 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (C) 2021 Gerhard Engleder <gerhard@engleder-embedded.com> */ + +#include "tsnep.h" + +static const char tsnep_stats_strings[][ETH_GSTRING_LEN] = { + "rx_packets", + "rx_bytes", + "rx_dropped", + "rx_multicast", + "rx_phy_errors", + "rx_forwarded_phy_errors", + "rx_invalid_frame_errors", + "tx_packets", + "tx_bytes", + "tx_dropped", +}; + +struct tsnep_stats { + u64 rx_packets; + u64 rx_bytes; + u64 rx_dropped; + u64 rx_multicast; + u64 rx_phy_errors; + u64 rx_forwarded_phy_errors; + u64 rx_invalid_frame_errors; + u64 tx_packets; + u64 tx_bytes; + u64 tx_dropped; +}; + +#define TSNEP_STATS_COUNT (sizeof(struct tsnep_stats) / sizeof(u64)) + +static const char tsnep_rx_queue_stats_strings[][ETH_GSTRING_LEN] = { + "rx_%d_packets", + "rx_%d_bytes", + "rx_%d_dropped", + "rx_%d_multicast", + "rx_%d_no_descriptor_errors", + "rx_%d_buffer_too_small_errors", + "rx_%d_fifo_overflow_errors", + "rx_%d_invalid_frame_errors", +}; + +struct tsnep_rx_queue_stats { + u64 rx_packets; + u64 rx_bytes; + u64 rx_dropped; + u64 rx_multicast; + u64 rx_no_descriptor_errors; + u64 rx_buffer_too_small_errors; + u64 rx_fifo_overflow_errors; + u64 rx_invalid_frame_errors; +}; + +#define TSNEP_RX_QUEUE_STATS_COUNT (sizeof(struct tsnep_rx_queue_stats) / \ + sizeof(u64)) + +static const char tsnep_tx_queue_stats_strings[][ETH_GSTRING_LEN] = { + "tx_%d_packets", + "tx_%d_bytes", + "tx_%d_dropped", +}; + +struct tsnep_tx_queue_stats { + u64 tx_packets; + u64 tx_bytes; + u64 tx_dropped; +}; + +#define TSNEP_TX_QUEUE_STATS_COUNT (sizeof(struct tsnep_tx_queue_stats) / \ + sizeof(u64)) + +static const char tsnep_priv_flags_strings[][ETH_GSTRING_LEN] = { + "loopback-100", + "loopback-1000", +}; + +#define TSNEP_PRIV_FLAGS_LOOPBACK_100 0x00000001 +#define TSNEP_PRIV_FLAGS_LOOPBACK_1000 0x00000002 +#define TSNEP_PRIV_FLAGS (TSNEP_PRIV_FLAGS_LOOPBACK_100 | \ + TSNEP_PRIV_FLAGS_LOOPBACK_1000) + +#define TSNEP_PRIV_FLAGS_COUNT (sizeof(tsnep_priv_flags_strings) / \ + ETH_GSTRING_LEN) + +static void tsnep_ethtool_get_drvinfo(struct net_device *netdev, + struct ethtool_drvinfo *drvinfo) +{ + struct tsnep_adapter *adapter = netdev_priv(netdev); + + strscpy(drvinfo->driver, TSNEP, sizeof(drvinfo->driver)); + strscpy(drvinfo->bus_info, dev_name(&adapter->pdev->dev), + sizeof(drvinfo->bus_info)); + + drvinfo->n_priv_flags = TSNEP_PRIV_FLAGS_COUNT; +} + +static int tsnep_ethtool_get_regs_len(struct net_device *netdev) +{ + struct tsnep_adapter *adapter = netdev_priv(netdev); + int len; + int num_queues; + + len = TSNEP_MAC_SIZE; + num_queues = max(adapter->num_tx_queues, adapter->num_rx_queues); + len += TSNEP_QUEUE_SIZE * (num_queues - 1); + + return len; +} + +static void tsnep_ethtool_get_regs(struct net_device *netdev, + struct ethtool_regs *regs, + void *p) +{ + struct tsnep_adapter *adapter = netdev_priv(netdev); + + regs->version = 1; + + memcpy_fromio(p, adapter->addr, regs->len); +} + +static u32 tsnep_ethtool_get_msglevel(struct net_device *netdev) +{ + struct tsnep_adapter *adapter = netdev_priv(netdev); + + return adapter->msg_enable; +} + +static void tsnep_ethtool_set_msglevel(struct net_device *netdev, u32 data) +{ + struct tsnep_adapter *adapter = netdev_priv(netdev); + + adapter->msg_enable = data; +} + +static void tsnep_ethtool_get_strings(struct net_device *netdev, u32 stringset, + u8 *data) +{ + struct tsnep_adapter *adapter = netdev_priv(netdev); + int rx_count = adapter->num_rx_queues; + int tx_count = adapter->num_tx_queues; + int i, j; + + switch (stringset) { + case ETH_SS_STATS: + memcpy(data, tsnep_stats_strings, sizeof(tsnep_stats_strings)); + data += sizeof(tsnep_stats_strings); + + for (i = 0; i < rx_count; i++) { + for (j = 0; j < TSNEP_RX_QUEUE_STATS_COUNT; j++) { + snprintf(data, ETH_GSTRING_LEN, + tsnep_rx_queue_stats_strings[j], i); + data += ETH_GSTRING_LEN; + } + } + + for (i = 0; i < tx_count; i++) { + for (j = 0; j < TSNEP_TX_QUEUE_STATS_COUNT; j++) { + snprintf(data, ETH_GSTRING_LEN, + tsnep_tx_queue_stats_strings[j], i); + data += ETH_GSTRING_LEN; + } + } + break; + case ETH_SS_TEST: + tsnep_ethtool_get_test_strings(data); + break; + case ETH_SS_PRIV_FLAGS: + memcpy(data, tsnep_priv_flags_strings, + sizeof(tsnep_priv_flags_strings)); + break; + } +} + +static void tsnep_ethtool_get_ethtool_stats(struct net_device *netdev, + struct ethtool_stats *stats, + u64 *data) +{ + struct tsnep_adapter *adapter = netdev_priv(netdev); + int rx_count = adapter->num_rx_queues; + int tx_count = adapter->num_tx_queues; + struct tsnep_stats tsnep_stats; + struct tsnep_rx_queue_stats tsnep_rx_queue_stats; + struct tsnep_tx_queue_stats tsnep_tx_queue_stats; + u32 reg; + int i; + + memset(&tsnep_stats, 0, sizeof(tsnep_stats)); + for (i = 0; i < adapter->num_rx_queues; i++) { + tsnep_stats.rx_packets += adapter->rx[i].packets; + tsnep_stats.rx_bytes += adapter->rx[i].bytes; + tsnep_stats.rx_dropped += adapter->rx[i].dropped; + tsnep_stats.rx_multicast += adapter->rx[i].multicast; + } + reg = ioread32(adapter->addr + ECM_STAT); + tsnep_stats.rx_phy_errors = + (reg & ECM_STAT_RX_ERR_MASK) >> ECM_STAT_RX_ERR_SHIFT; + tsnep_stats.rx_forwarded_phy_errors = + (reg & ECM_STAT_FWD_RX_ERR_MASK) >> ECM_STAT_FWD_RX_ERR_SHIFT; + tsnep_stats.rx_invalid_frame_errors = + (reg & ECM_STAT_INV_FRM_MASK) >> ECM_STAT_INV_FRM_SHIFT; + for (i = 0; i < adapter->num_tx_queues; i++) { + tsnep_stats.tx_packets += adapter->tx[i].packets; + tsnep_stats.tx_bytes += adapter->tx[i].bytes; + tsnep_stats.tx_dropped += adapter->tx[i].dropped; + } + memcpy(data, &tsnep_stats, sizeof(tsnep_stats)); + data += TSNEP_STATS_COUNT; + + for (i = 0; i < rx_count; i++) { + memset(&tsnep_rx_queue_stats, 0, sizeof(tsnep_rx_queue_stats)); + tsnep_rx_queue_stats.rx_packets = adapter->rx[i].packets; + tsnep_rx_queue_stats.rx_bytes = adapter->rx[i].bytes; + tsnep_rx_queue_stats.rx_dropped = adapter->rx[i].dropped; + tsnep_rx_queue_stats.rx_multicast = adapter->rx[i].multicast; + reg = ioread32(adapter->addr + TSNEP_QUEUE(i) + + TSNEP_RX_STATISTIC); + tsnep_rx_queue_stats.rx_no_descriptor_errors = + (reg & TSNEP_RX_STATISTIC_NO_DESC_MASK) >> + TSNEP_RX_STATISTIC_NO_DESC_SHIFT; + tsnep_rx_queue_stats.rx_buffer_too_small_errors = + (reg & TSNEP_RX_STATISTIC_BUFFER_TOO_SMALL_MASK) >> + TSNEP_RX_STATISTIC_BUFFER_TOO_SMALL_SHIFT; + tsnep_rx_queue_stats.rx_fifo_overflow_errors = + (reg & TSNEP_RX_STATISTIC_FIFO_OVERFLOW_MASK) >> + TSNEP_RX_STATISTIC_FIFO_OVERFLOW_SHIFT; + tsnep_rx_queue_stats.rx_invalid_frame_errors = + (reg & TSNEP_RX_STATISTIC_INVALID_FRAME_MASK) >> + TSNEP_RX_STATISTIC_INVALID_FRAME_SHIFT; + memcpy(data, &tsnep_rx_queue_stats, + sizeof(tsnep_rx_queue_stats)); + data += TSNEP_RX_QUEUE_STATS_COUNT; + } + + for (i = 0; i < tx_count; i++) { + memset(&tsnep_tx_queue_stats, 0, sizeof(tsnep_tx_queue_stats)); + tsnep_tx_queue_stats.tx_packets += adapter->tx[i].packets; + tsnep_tx_queue_stats.tx_bytes += adapter->tx[i].bytes; + tsnep_tx_queue_stats.tx_dropped += adapter->tx[i].dropped; + memcpy(data, &tsnep_tx_queue_stats, + sizeof(tsnep_tx_queue_stats)); + data += TSNEP_TX_QUEUE_STATS_COUNT; + } +} + +static u32 tsnep_ethtool_get_priv_flags(struct net_device *netdev) +{ + struct tsnep_adapter *adapter = netdev_priv(netdev); + u32 priv_flags = 0; + + switch (adapter->loopback) { + case SPEED_100: + priv_flags |= TSNEP_PRIV_FLAGS_LOOPBACK_100; + break; + case SPEED_1000: + priv_flags |= TSNEP_PRIV_FLAGS_LOOPBACK_1000; + break; + } + + return priv_flags; +} + +static int tsnep_ethtool_set_priv_flags(struct net_device *netdev, + u32 priv_flags) +{ + struct tsnep_adapter *adapter = netdev_priv(netdev); + int retval; + + if (priv_flags & ~TSNEP_PRIV_FLAGS) + return -EINVAL; + + if ((priv_flags & TSNEP_PRIV_FLAGS_LOOPBACK_100) && + (priv_flags & TSNEP_PRIV_FLAGS_LOOPBACK_1000)) + return -EINVAL; + + if ((priv_flags & TSNEP_PRIV_FLAGS_LOOPBACK_100) && + adapter->loopback != SPEED_100) { + if (adapter->loopback != SPEED_UNKNOWN) + retval = phy_loopback(adapter->phydev, false); + else + retval = 0; + + if (!retval) { + adapter->phydev->speed = SPEED_100; + adapter->phydev->duplex = DUPLEX_FULL; + retval = phy_loopback(adapter->phydev, true); + if (!retval) + adapter->loopback = SPEED_100; + } + } else if ((priv_flags & TSNEP_PRIV_FLAGS_LOOPBACK_1000) && + adapter->loopback != SPEED_1000) { + if (adapter->loopback != SPEED_UNKNOWN) + retval = phy_loopback(adapter->phydev, false); + else + retval = 0; + + if (!retval) { + adapter->phydev->speed = SPEED_1000; + adapter->phydev->duplex = DUPLEX_FULL; + retval = phy_loopback(adapter->phydev, true); + if (!retval) + adapter->loopback = SPEED_1000; + } + } else if (!(priv_flags & TSNEP_PRIV_FLAGS_LOOPBACK_100) && + !(priv_flags & TSNEP_PRIV_FLAGS_LOOPBACK_1000) && + (adapter->loopback != SPEED_UNKNOWN)) { + retval = phy_loopback(adapter->phydev, false); + if (!retval) + adapter->loopback = SPEED_UNKNOWN; + } else { + retval = 0; + } + + return retval; +} + +static int tsnep_ethtool_get_sset_count(struct net_device *netdev, int sset) +{ + struct tsnep_adapter *adapter = netdev_priv(netdev); + int rx_count; + int tx_count; + + switch (sset) { + case ETH_SS_STATS: + rx_count = adapter->num_rx_queues; + tx_count = adapter->num_tx_queues; + return TSNEP_STATS_COUNT + + TSNEP_RX_QUEUE_STATS_COUNT * rx_count + + TSNEP_TX_QUEUE_STATS_COUNT * tx_count; + case ETH_SS_TEST: + return tsnep_ethtool_get_test_count(); + case ETH_SS_PRIV_FLAGS: + return TSNEP_PRIV_FLAGS_COUNT; + default: + return -EOPNOTSUPP; + } +} + +static int tsnep_ethtool_get_ts_info(struct net_device *dev, + struct ethtool_ts_info *info) +{ + struct tsnep_adapter *adapter = netdev_priv(dev); + + info->so_timestamping = SOF_TIMESTAMPING_TX_SOFTWARE | + SOF_TIMESTAMPING_RX_SOFTWARE | + SOF_TIMESTAMPING_SOFTWARE | + SOF_TIMESTAMPING_TX_HARDWARE | + SOF_TIMESTAMPING_RX_HARDWARE | + SOF_TIMESTAMPING_RAW_HARDWARE; + + if (adapter->ptp_clock) + info->phc_index = ptp_clock_index(adapter->ptp_clock); + else + info->phc_index = -1; + + info->tx_types = BIT(HWTSTAMP_TX_OFF) | + BIT(HWTSTAMP_TX_ON); + info->rx_filters = BIT(HWTSTAMP_FILTER_NONE) | + BIT(HWTSTAMP_FILTER_ALL); + + return 0; +} + +const struct ethtool_ops tsnep_ethtool_ops = { + .get_drvinfo = tsnep_ethtool_get_drvinfo, + .get_regs_len = tsnep_ethtool_get_regs_len, + .get_regs = tsnep_ethtool_get_regs, + .get_msglevel = tsnep_ethtool_get_msglevel, + .set_msglevel = tsnep_ethtool_set_msglevel, + .nway_reset = phy_ethtool_nway_reset, + .get_link = ethtool_op_get_link, + .self_test = tsnep_ethtool_self_test, + .get_strings = tsnep_ethtool_get_strings, + .get_ethtool_stats = tsnep_ethtool_get_ethtool_stats, + .get_priv_flags = tsnep_ethtool_get_priv_flags, + .set_priv_flags = tsnep_ethtool_set_priv_flags, + .get_sset_count = tsnep_ethtool_get_sset_count, + .get_ts_info = tsnep_ethtool_get_ts_info, + .get_link_ksettings = phy_ethtool_get_link_ksettings, + .set_link_ksettings = phy_ethtool_set_link_ksettings, +}; diff --git a/drivers/net/ethernet/engleder/tsnep_hw.h b/drivers/net/ethernet/engleder/tsnep_hw.h new file mode 100644 index 000000000000..e886167ba340 --- /dev/null +++ b/drivers/net/ethernet/engleder/tsnep_hw.h @@ -0,0 +1,236 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright (C) 2021 Gerhard Engleder <gerhard@engleder-embedded.com> */ + +/* Hardware definition of TSNEP and EtherCAT MAC device */ + +#ifndef _TSNEP_HW_H +#define _TSNEP_HW_H + +#include <linux/types.h> + +/* type */ +#define ECM_TYPE 0x0000 +#define ECM_REVISION_MASK 0x000000FF +#define ECM_REVISION_SHIFT 0 +#define ECM_VERSION_MASK 0x0000FF00 +#define ECM_VERSION_SHIFT 8 +#define ECM_QUEUE_COUNT_MASK 0x00070000 +#define ECM_QUEUE_COUNT_SHIFT 16 +#define ECM_GATE_CONTROL 0x02000000 + +/* system time */ +#define ECM_SYSTEM_TIME_LOW 0x0008 +#define ECM_SYSTEM_TIME_HIGH 0x000C + +/* clock */ +#define ECM_CLOCK_RATE 0x0010 +#define ECM_CLOCK_RATE_OFFSET_MASK 0x7FFFFFFF +#define ECM_CLOCK_RATE_OFFSET_SIGN 0x80000000 + +/* interrupt */ +#define ECM_INT_ENABLE 0x0018 +#define ECM_INT_ACTIVE 0x001C +#define ECM_INT_ACKNOWLEDGE 0x001C +#define ECM_INT_MD 0x00000001 +#define ECM_INT_LINK 0x00000020 +#define ECM_INT_TX_0 0x00000100 +#define ECM_INT_RX_0 0x00000200 + +/* reset */ +#define ECM_RESET 0x0020 +#define ECM_RESET_COMMON 0x00000001 +#define ECM_RESET_CHANNEL 0x00000100 +#define ECM_RESET_TXRX 0x00010000 + +/* control and status */ +#define ECM_STATUS 0x0080 +#define ECM_NO_LINK 0x01000000 +#define ECM_HALF_DUPLEX 0x02000000 +#define ECM_SPEED_MASK 0x0C000000 +#define ECM_SPEED_10 0x00000000 +#define ECM_SPEED_100 0x04000000 +#define ECM_SPEED_1000 0x08000000 + +/* management data */ +#define ECM_MD_CONTROL 0x0084 +#define ECM_MD_STATUS 0x0084 +#define ECM_MD_PREAMBLE 0x00000001 +#define ECM_MD_READ 0x00000004 +#define ECM_MD_WRITE 0x00000002 +#define ECM_MD_ADDR_MASK 0x000000F8 +#define ECM_MD_ADDR_SHIFT 3 +#define ECM_MD_PHY_ADDR_FLAG 0x00000100 +#define ECM_MD_PHY_ADDR_MASK 0x00003E00 +#define ECM_MD_PHY_ADDR_SHIFT 9 +#define ECM_MD_BUSY 0x00000001 +#define ECM_MD_DATA_MASK 0xFFFF0000 +#define ECM_MD_DATA_SHIFT 16 + +/* statistic */ +#define ECM_STAT 0x00B0 +#define ECM_STAT_RX_ERR_MASK 0x000000FF +#define ECM_STAT_RX_ERR_SHIFT 0 +#define ECM_STAT_INV_FRM_MASK 0x0000FF00 +#define ECM_STAT_INV_FRM_SHIFT 8 +#define ECM_STAT_FWD_RX_ERR_MASK 0x00FF0000 +#define ECM_STAT_FWD_RX_ERR_SHIFT 16 + +/* tsnep */ +#define TSNEP_MAC_SIZE 0x4000 +#define TSNEP_QUEUE_SIZE 0x1000 +#define TSNEP_QUEUE(n) ({ typeof(n) __n = (n); \ + (__n) == 0 ? \ + 0 : \ + TSNEP_MAC_SIZE + TSNEP_QUEUE_SIZE * ((__n) - 1); }) +#define TSNEP_MAX_QUEUES 8 +#define TSNEP_MAX_FRAME_SIZE (2 * 1024) /* hardware supports actually 16k */ +#define TSNEP_DESC_SIZE 256 +#define TSNEP_DESC_OFFSET 128 + +/* tsnep register */ +#define TSNEP_INFO 0x0100 +#define TSNEP_INFO_RX_ASSIGN 0x00010000 +#define TSNEP_INFO_TX_TIME 0x00020000 +#define TSNEP_CONTROL 0x0108 +#define TSNEP_CONTROL_TX_RESET 0x00000001 +#define TSNEP_CONTROL_TX_ENABLE 0x00000002 +#define TSNEP_CONTROL_TX_DMA_ERROR 0x00000010 +#define TSNEP_CONTROL_TX_DESC_ERROR 0x00000020 +#define TSNEP_CONTROL_RX_RESET 0x00000100 +#define TSNEP_CONTROL_RX_ENABLE 0x00000200 +#define TSNEP_CONTROL_RX_DISABLE 0x00000400 +#define TSNEP_CONTROL_RX_DMA_ERROR 0x00001000 +#define TSNEP_CONTROL_RX_DESC_ERROR 0x00002000 +#define TSNEP_TX_DESC_ADDR_LOW 0x0140 +#define TSNEP_TX_DESC_ADDR_HIGH 0x0144 +#define TSNEP_RX_DESC_ADDR_LOW 0x0180 +#define TSNEP_RX_DESC_ADDR_HIGH 0x0184 +#define TSNEP_RESET_OWNER_COUNTER 0x01 +#define TSNEP_RX_STATISTIC 0x0190 +#define TSNEP_RX_STATISTIC_NO_DESC_MASK 0x000000FF +#define TSNEP_RX_STATISTIC_NO_DESC_SHIFT 0 +#define TSNEP_RX_STATISTIC_BUFFER_TOO_SMALL_MASK 0x0000FF00 +#define TSNEP_RX_STATISTIC_BUFFER_TOO_SMALL_SHIFT 8 +#define TSNEP_RX_STATISTIC_FIFO_OVERFLOW_MASK 0x00FF0000 +#define TSNEP_RX_STATISTIC_FIFO_OVERFLOW_SHIFT 16 +#define TSNEP_RX_STATISTIC_INVALID_FRAME_MASK 0xFF000000 +#define TSNEP_RX_STATISTIC_INVALID_FRAME_SHIFT 24 +#define TSNEP_RX_STATISTIC_NO_DESC 0x0190 +#define TSNEP_RX_STATISTIC_BUFFER_TOO_SMALL 0x0191 +#define TSNEP_RX_STATISTIC_FIFO_OVERFLOW 0x0192 +#define TSNEP_RX_STATISTIC_INVALID_FRAME 0x0193 +#define TSNEP_RX_ASSIGN 0x01A0 +#define TSNEP_RX_ASSIGN_ETHER_TYPE_ACTIVE 0x00000001 +#define TSNEP_RX_ASSIGN_ETHER_TYPE_MASK 0xFFFF0000 +#define TSNEP_RX_ASSIGN_ETHER_TYPE_SHIFT 16 +#define TSNEP_MAC_ADDRESS_LOW 0x0800 +#define TSNEP_MAC_ADDRESS_HIGH 0x0804 +#define TSNEP_RX_FILTER 0x0806 +#define TSNEP_RX_FILTER_ACCEPT_ALL_MULTICASTS 0x0001 +#define TSNEP_RX_FILTER_ACCEPT_ALL_UNICASTS 0x0002 +#define TSNEP_GC 0x0808 +#define TSNEP_GC_ENABLE_A 0x00000002 +#define TSNEP_GC_ENABLE_B 0x00000004 +#define TSNEP_GC_DISABLE 0x00000008 +#define TSNEP_GC_ENABLE_TIMEOUT 0x00000010 +#define TSNEP_GC_ACTIVE_A 0x00000002 +#define TSNEP_GC_ACTIVE_B 0x00000004 +#define TSNEP_GC_CHANGE_AB 0x00000008 +#define TSNEP_GC_TIMEOUT_ACTIVE 0x00000010 +#define TSNEP_GC_TIMEOUT_SIGNAL 0x00000020 +#define TSNEP_GC_LIST_ERROR 0x00000080 +#define TSNEP_GC_OPEN 0x00FF0000 +#define TSNEP_GC_OPEN_SHIFT 16 +#define TSNEP_GC_NEXT_OPEN 0xFF000000 +#define TSNEP_GC_NEXT_OPEN_SHIFT 24 +#define TSNEP_GC_TIMEOUT 131072 +#define TSNEP_GC_TIME 0x080C +#define TSNEP_GC_CHANGE 0x0810 +#define TSNEP_GCL_A 0x2000 +#define TSNEP_GCL_B 0x2800 +#define TSNEP_GCL_SIZE SZ_2K + +/* tsnep gate control list operation */ +struct tsnep_gcl_operation { + u32 properties; + u32 interval; +}; + +#define TSNEP_GCL_COUNT (TSNEP_GCL_SIZE / sizeof(struct tsnep_gcl_operation)) +#define TSNEP_GCL_MASK 0x000000FF +#define TSNEP_GCL_INSERT 0x20000000 +#define TSNEP_GCL_CHANGE 0x40000000 +#define TSNEP_GCL_LAST 0x80000000 +#define TSNEP_GCL_MIN_INTERVAL 32 + +/* tsnep TX/RX descriptor */ +#define TSNEP_DESC_SIZE 256 +#define TSNEP_DESC_SIZE_DATA_AFTER 2048 +#define TSNEP_DESC_OFFSET 128 +#define TSNEP_DESC_OWNER_COUNTER_MASK 0xC0000000 +#define TSNEP_DESC_OWNER_COUNTER_SHIFT 30 +#define TSNEP_DESC_LENGTH_MASK 0x00003FFF +#define TSNEP_DESC_INTERRUPT_FLAG 0x00040000 +#define TSNEP_DESC_EXTENDED_WRITEBACK_FLAG 0x00080000 +#define TSNEP_DESC_NO_LINK_FLAG 0x01000000 +#define TSNEP_DESC_HALF_DUPLEX_FLAG 0x02000000 +#define TSNEP_DESC_SPEED_MASK 0x0C000000 +#define TSNEP_DESC_SPEED_10 0x00000000 +#define TSNEP_DESC_SPEED_100 0x04000000 +#define TSNEP_DESC_SPEED_1000 0x08000000 + +/* tsnep TX descriptor */ +struct tsnep_tx_desc { + u32 properties; + u32 more_properties; + u32 reserved[2]; + u64 next; + u64 tx; +}; + +#define TSNEP_TX_DESC_OWNER_MASK 0xE0000000 +#define TSNEP_TX_DESC_OWNER_USER_FLAG 0x20000000 +#define TSNEP_TX_DESC_LAST_FRAGMENT_FLAG 0x00010000 +#define TSNEP_TX_DESC_DATA_AFTER_DESC_FLAG 0x00020000 + +/* tsnep TX descriptor writeback */ +struct tsnep_tx_desc_wb { + u32 properties; + u32 reserved1[3]; + u64 timestamp; + u32 dma_delay; + u32 reserved2; +}; + +#define TSNEP_TX_DESC_UNDERRUN_ERROR_FLAG 0x00010000 +#define TSNEP_TX_DESC_DMA_DELAY_FIRST_DATA_MASK 0x0000FFFC +#define TSNEP_TX_DESC_DMA_DELAY_FIRST_DATA_SHIFT 2 +#define TSNEP_TX_DESC_DMA_DELAY_LAST_DATA_MASK 0xFFFC0000 +#define TSNEP_TX_DESC_DMA_DELAY_LAST_DATA_SHIFT 18 +#define TSNEP_TX_DESC_DMA_DELAY_NS 64 + +/* tsnep RX descriptor */ +struct tsnep_rx_desc { + u32 properties; + u32 reserved[3]; + u64 next; + u64 rx; +}; + +#define TSNEP_RX_DESC_BUFFER_SIZE_MASK 0x00003FFC + +/* tsnep RX descriptor writeback */ +struct tsnep_rx_desc_wb { + u32 properties; + u32 reserved[7]; +}; + +/* tsnep RX inline meta */ +struct tsnep_rx_inline { + u64 reserved; + u64 timestamp; +}; + +#define TSNEP_RX_INLINE_METADATA_SIZE (sizeof(struct tsnep_rx_inline)) + +#endif /* _TSNEP_HW_H */ diff --git a/drivers/net/ethernet/engleder/tsnep_main.c b/drivers/net/ethernet/engleder/tsnep_main.c new file mode 100644 index 000000000000..7fa517cb8673 --- /dev/null +++ b/drivers/net/ethernet/engleder/tsnep_main.c @@ -0,0 +1,1227 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (C) 2021 Gerhard Engleder <gerhard@engleder-embedded.com> */ + +/* TSN endpoint Ethernet MAC driver + * + * The TSN endpoint Ethernet MAC is a FPGA based network device for real-time + * communication. It is designed for endpoints within TSN (Time Sensitive + * Networking) networks; e.g., for PLCs in the industrial automation case. + * + * It supports multiple TX/RX queue pairs. The first TX/RX queue pair is used + * by the driver. + * + * More information can be found here: + * - www.embedded-experts.at/tsn + * - www.engleder-embedded.com + */ + +#include "tsnep.h" +#include "tsnep_hw.h" + +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_net.h> +#include <linux/of_mdio.h> +#include <linux/interrupt.h> +#include <linux/etherdevice.h> +#include <linux/phy.h> +#include <linux/iopoll.h> + +#define RX_SKB_LENGTH (round_up(TSNEP_RX_INLINE_METADATA_SIZE + ETH_HLEN + \ + TSNEP_MAX_FRAME_SIZE + ETH_FCS_LEN, 4)) +#define RX_SKB_RESERVE ((16 - TSNEP_RX_INLINE_METADATA_SIZE) + NET_IP_ALIGN) +#define RX_SKB_ALLOC_LENGTH (RX_SKB_RESERVE + RX_SKB_LENGTH) + +#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT +#define DMA_ADDR_HIGH(dma_addr) ((u32)(((dma_addr) >> 32) & 0xFFFFFFFF)) +#else +#define DMA_ADDR_HIGH(dma_addr) ((u32)(0)) +#endif +#define DMA_ADDR_LOW(dma_addr) ((u32)((dma_addr) & 0xFFFFFFFF)) + +static void tsnep_enable_irq(struct tsnep_adapter *adapter, u32 mask) +{ + unsigned long flags; + + spin_lock_irqsave(&adapter->irq_lock, flags); + adapter->irq_enable |= mask; + iowrite32(adapter->irq_enable, adapter->addr + ECM_INT_ENABLE); + spin_unlock_irqrestore(&adapter->irq_lock, flags); +} + +static void tsnep_disable_irq(struct tsnep_adapter *adapter, u32 mask) +{ + unsigned long flags; + + spin_lock_irqsave(&adapter->irq_lock, flags); + adapter->irq_enable &= ~mask; + iowrite32(adapter->irq_enable, adapter->addr + ECM_INT_ENABLE); + spin_unlock_irqrestore(&adapter->irq_lock, flags); +} + +static irqreturn_t tsnep_irq(int irq, void *arg) +{ + struct tsnep_adapter *adapter = arg; + u32 active = ioread32(adapter->addr + ECM_INT_ACTIVE); + + /* acknowledge interrupt */ + if (active != 0) + iowrite32(active, adapter->addr + ECM_INT_ACKNOWLEDGE); + + /* handle management data interrupt */ + if ((active & ECM_INT_MD) != 0) { + adapter->md_active = false; + wake_up_interruptible(&adapter->md_wait); + } + + /* handle link interrupt */ + if ((active & ECM_INT_LINK) != 0) { + if (adapter->netdev->phydev) { + struct phy_device *phydev = adapter->netdev->phydev; + u32 status = ioread32(adapter->addr + ECM_STATUS); + int link = (status & ECM_NO_LINK) ? 0 : 1; + u32 speed = status & ECM_SPEED_MASK; + + if (speed != ECM_SPEED_100 && + speed != ECM_SPEED_1000) + link = 0; + + if (!(link == 0 && phydev->link == 0)) + phy_mac_interrupt(phydev); + } + } + + /* handle TX/RX queue 0 interrupt */ + if ((active & (ECM_INT_TX_0 | ECM_INT_RX_0)) != 0) { + if (adapter->netdev) { + tsnep_disable_irq(adapter, ECM_INT_TX_0 | ECM_INT_RX_0); + napi_schedule(&adapter->napi); + } + } + + return IRQ_HANDLED; +} + +static int tsnep_mdiobus_read(struct mii_bus *bus, int addr, int regnum) +{ + struct tsnep_adapter *adapter = bus->priv; + u32 md; + int retval; + + if (regnum & MII_ADDR_C45) + return -EOPNOTSUPP; + + /* management data frame without preamble */ + md = ECM_MD_READ; + md |= (regnum << ECM_MD_ADDR_SHIFT) & ECM_MD_ADDR_MASK; + md |= ECM_MD_PHY_ADDR_FLAG; + md |= (addr << ECM_MD_PHY_ADDR_SHIFT) & ECM_MD_PHY_ADDR_MASK; + adapter->md_active = true; + iowrite32(md, adapter->addr + ECM_MD_CONTROL); + retval = wait_event_interruptible(adapter->md_wait, + !adapter->md_active); + if (retval != 0) + return retval; + + md = ioread32(adapter->addr + ECM_MD_STATUS); + if (md & ECM_MD_BUSY) + return -EIO; + + return (md & ECM_MD_DATA_MASK) >> ECM_MD_DATA_SHIFT; +} + +static int tsnep_mdiobus_write(struct mii_bus *bus, int addr, int regnum, + u16 val) +{ + struct tsnep_adapter *adapter = bus->priv; + u32 md; + int retval; + + if (regnum & MII_ADDR_C45) + return -EOPNOTSUPP; + + /* management data frame without preamble */ + md = ECM_MD_WRITE; + md |= (regnum << ECM_MD_ADDR_SHIFT) & ECM_MD_ADDR_MASK; + md |= ECM_MD_PHY_ADDR_FLAG; + md |= (addr << ECM_MD_PHY_ADDR_SHIFT) & ECM_MD_PHY_ADDR_MASK; + md |= ((u32)val << ECM_MD_DATA_SHIFT) & ECM_MD_DATA_MASK; + adapter->md_active = true; + iowrite32(md, adapter->addr + ECM_MD_CONTROL); + retval = wait_event_interruptible(adapter->md_wait, + !adapter->md_active); + if (retval != 0) + return retval; + + md = ioread32(adapter->addr + ECM_MD_STATUS); + if (md & ECM_MD_BUSY) + return -EIO; + + return 0; +} + +static void tsnep_phy_link_status_change(struct net_device *netdev) +{ + phy_print_status(netdev->phydev); +} + +static int tsnep_phy_open(struct tsnep_adapter *adapter) +{ + struct phy_device *phydev; + struct ethtool_eee ethtool_eee; + int retval; + + retval = phy_connect_direct(adapter->netdev, adapter->phydev, + tsnep_phy_link_status_change, + adapter->phy_mode); + if (retval) + return retval; + phydev = adapter->netdev->phydev; + + /* MAC supports only 100Mbps|1000Mbps full duplex + * SPE (Single Pair Ethernet) is also an option but not implemented yet + */ + phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_10baseT_Half_BIT); + phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_10baseT_Full_BIT); + phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_100baseT_Half_BIT); + phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_1000baseT_Half_BIT); + + /* disable EEE autoneg, EEE not supported by TSNEP */ + memset(ðtool_eee, 0, sizeof(ethtool_eee)); + phy_ethtool_set_eee(adapter->phydev, ðtool_eee); + + adapter->phydev->irq = PHY_MAC_INTERRUPT; + phy_start(adapter->phydev); + phy_start_aneg(adapter->phydev); + + return 0; +} + +static void tsnep_phy_close(struct tsnep_adapter *adapter) +{ + phy_stop(adapter->netdev->phydev); + phy_disconnect(adapter->netdev->phydev); + adapter->netdev->phydev = NULL; +} + +static void tsnep_tx_ring_cleanup(struct tsnep_tx *tx) +{ + struct device *dev = &tx->adapter->pdev->dev; + int i; + + memset(tx->entry, 0, sizeof(tx->entry)); + + for (i = 0; i < TSNEP_RING_PAGE_COUNT; i++) { + if (tx->page[i]) { + dma_free_coherent(dev, PAGE_SIZE, tx->page[i], + tx->page_dma[i]); + tx->page[i] = NULL; + tx->page_dma[i] = 0; + } + } +} + +static int tsnep_tx_ring_init(struct tsnep_tx *tx) +{ + struct device *dev = &tx->adapter->pdev->dev; + struct tsnep_tx_entry *entry; + struct tsnep_tx_entry *next_entry; + int i, j; + int retval; + + for (i = 0; i < TSNEP_RING_PAGE_COUNT; i++) { + tx->page[i] = + dma_alloc_coherent(dev, PAGE_SIZE, &tx->page_dma[i], + GFP_KERNEL); + if (!tx->page[i]) { + retval = -ENOMEM; + goto alloc_failed; + } + for (j = 0; j < TSNEP_RING_ENTRIES_PER_PAGE; j++) { + entry = &tx->entry[TSNEP_RING_ENTRIES_PER_PAGE * i + j]; + entry->desc_wb = (struct tsnep_tx_desc_wb *) + (((u8 *)tx->page[i]) + TSNEP_DESC_SIZE * j); + entry->desc = (struct tsnep_tx_desc *) + (((u8 *)entry->desc_wb) + TSNEP_DESC_OFFSET); + entry->desc_dma = tx->page_dma[i] + TSNEP_DESC_SIZE * j; + } + } + for (i = 0; i < TSNEP_RING_SIZE; i++) { + entry = &tx->entry[i]; + next_entry = &tx->entry[(i + 1) % TSNEP_RING_SIZE]; + entry->desc->next = next_entry->desc_dma; + } + + return 0; + +alloc_failed: + tsnep_tx_ring_cleanup(tx); + return retval; +} + +static void tsnep_tx_activate(struct tsnep_tx *tx, int index, bool last) +{ + struct tsnep_tx_entry *entry = &tx->entry[index]; + + entry->properties = 0; + if (entry->skb) { + entry->properties = + skb_pagelen(entry->skb) & TSNEP_DESC_LENGTH_MASK; + entry->properties |= TSNEP_DESC_INTERRUPT_FLAG; + if (skb_shinfo(entry->skb)->tx_flags & SKBTX_IN_PROGRESS) + entry->properties |= TSNEP_DESC_EXTENDED_WRITEBACK_FLAG; + + /* toggle user flag to prevent false acknowledge + * + * Only the first fragment is acknowledged. For all other + * fragments no acknowledge is done and the last written owner + * counter stays in the writeback descriptor. Therefore, it is + * possible that the last written owner counter is identical to + * the new incremented owner counter and a false acknowledge is + * detected before the real acknowledge has been done by + * hardware. + * + * The user flag is used to prevent this situation. The user + * flag is copied to the writeback descriptor by the hardware + * and is used as additional acknowledge data. By toggeling the + * user flag only for the first fragment (which is + * acknowledged), it is guaranteed that the last acknowledge + * done for this descriptor has used a different user flag and + * cannot be detected as false acknowledge. + */ + entry->owner_user_flag = !entry->owner_user_flag; + } + if (last) + entry->properties |= TSNEP_TX_DESC_LAST_FRAGMENT_FLAG; + if (index == tx->increment_owner_counter) { + tx->owner_counter++; + if (tx->owner_counter == 4) + tx->owner_counter = 1; + tx->increment_owner_counter--; + if (tx->increment_owner_counter < 0) + tx->increment_owner_counter = TSNEP_RING_SIZE - 1; + } + entry->properties |= + (tx->owner_counter << TSNEP_DESC_OWNER_COUNTER_SHIFT) & + TSNEP_DESC_OWNER_COUNTER_MASK; + if (entry->owner_user_flag) + entry->properties |= TSNEP_TX_DESC_OWNER_USER_FLAG; + entry->desc->more_properties = entry->len & TSNEP_DESC_LENGTH_MASK; + + dma_wmb(); + + entry->desc->properties = entry->properties; +} + +static int tsnep_tx_desc_available(struct tsnep_tx *tx) +{ + if (tx->read <= tx->write) + return TSNEP_RING_SIZE - tx->write + tx->read - 1; + else + return tx->read - tx->write - 1; +} + +static int tsnep_tx_map(struct sk_buff *skb, struct tsnep_tx *tx, int count) +{ + struct device *dev = &tx->adapter->pdev->dev; + struct tsnep_tx_entry *entry; + unsigned int len; + dma_addr_t dma; + int i; + + for (i = 0; i < count; i++) { + entry = &tx->entry[(tx->write + i) % TSNEP_RING_SIZE]; + + if (i == 0) { + len = skb_headlen(skb); + dma = dma_map_single(dev, skb->data, len, + DMA_TO_DEVICE); + } else { + len = skb_frag_size(&skb_shinfo(skb)->frags[i - 1]); + dma = skb_frag_dma_map(dev, + &skb_shinfo(skb)->frags[i - 1], + 0, len, DMA_TO_DEVICE); + } + if (dma_mapping_error(dev, dma)) + return -ENOMEM; + + dma_unmap_len_set(entry, len, len); + dma_unmap_addr_set(entry, dma, dma); + + entry->desc->tx = dma; + } + + return 0; +} + +static void tsnep_tx_unmap(struct tsnep_tx *tx, int count) +{ + struct device *dev = &tx->adapter->pdev->dev; + struct tsnep_tx_entry *entry; + int i; + + for (i = 0; i < count; i++) { + entry = &tx->entry[(tx->read + i) % TSNEP_RING_SIZE]; + + if (dma_unmap_len(entry, len)) { + if (i == 0) + dma_unmap_single(dev, + dma_unmap_addr(entry, dma), + dma_unmap_len(entry, len), + DMA_TO_DEVICE); + else + dma_unmap_page(dev, + dma_unmap_addr(entry, dma), + dma_unmap_len(entry, len), + DMA_TO_DEVICE); + dma_unmap_len_set(entry, len, 0); + } + } +} + +static netdev_tx_t tsnep_xmit_frame_ring(struct sk_buff *skb, + struct tsnep_tx *tx) +{ + unsigned long flags; + int count = 1; + struct tsnep_tx_entry *entry; + int i; + int retval; + + if (skb_shinfo(skb)->nr_frags > 0) + count += skb_shinfo(skb)->nr_frags; + + spin_lock_irqsave(&tx->lock, flags); + + if (tsnep_tx_desc_available(tx) < count) { + /* ring full, shall not happen because queue is stopped if full + * below + */ + netif_stop_queue(tx->adapter->netdev); + + spin_unlock_irqrestore(&tx->lock, flags); + + return NETDEV_TX_BUSY; + } + + entry = &tx->entry[tx->write]; + entry->skb = skb; + + retval = tsnep_tx_map(skb, tx, count); + if (retval != 0) { + tsnep_tx_unmap(tx, count); + dev_kfree_skb_any(entry->skb); + entry->skb = NULL; + + tx->dropped++; + + spin_unlock_irqrestore(&tx->lock, flags); + + netdev_err(tx->adapter->netdev, "TX DMA map failed\n"); + + return NETDEV_TX_OK; + } + + if (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) + skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS; + + for (i = 0; i < count; i++) + tsnep_tx_activate(tx, (tx->write + i) % TSNEP_RING_SIZE, + i == (count - 1)); + skb_tx_timestamp(skb); + + /* entry->properties shall be valid before write pointer is + * incrememted + */ + wmb(); + tx->write = (tx->write + count) % TSNEP_RING_SIZE; + + iowrite32(TSNEP_CONTROL_TX_ENABLE, tx->addr + TSNEP_CONTROL); + + if (tsnep_tx_desc_available(tx) < (MAX_SKB_FRAGS + 1)) { + /* ring can get full with next frame */ + netif_stop_queue(tx->adapter->netdev); + } + + tx->packets++; + tx->bytes += skb_pagelen(entry->skb) + ETH_FCS_LEN; + + spin_unlock_irqrestore(&tx->lock, flags); + + return NETDEV_TX_OK; +} + +static bool tsnep_tx_napi_poll(struct tsnep_tx *tx, int napi_budget) +{ + unsigned long flags; + int budget = 128; + struct tsnep_tx_entry *entry; + int count; + + spin_lock_irqsave(&tx->lock, flags); + + do { + if (tx->read == tx->write) + break; + + entry = &tx->entry[tx->read]; + if ((entry->desc_wb->properties & + TSNEP_TX_DESC_OWNER_MASK) != + (entry->properties & TSNEP_TX_DESC_OWNER_MASK)) + break; + + dma_rmb(); + + count = 1; + if (skb_shinfo(entry->skb)->nr_frags > 0) + count += skb_shinfo(entry->skb)->nr_frags; + + tsnep_tx_unmap(tx, count); + + if ((skb_shinfo(entry->skb)->tx_flags & SKBTX_IN_PROGRESS) && + (entry->desc_wb->properties & + TSNEP_DESC_EXTENDED_WRITEBACK_FLAG)) { + struct skb_shared_hwtstamps hwtstamps; + + memset(&hwtstamps, 0, sizeof(hwtstamps)); + hwtstamps.hwtstamp = + ns_to_ktime(entry->desc_wb->timestamp); + + skb_tstamp_tx(entry->skb, &hwtstamps); + } + + napi_consume_skb(entry->skb, budget); + entry->skb = NULL; + + /* descriptor shall be free before read pointer is incremented + */ + wmb(); + + tx->read = (tx->read + count) % TSNEP_RING_SIZE; + + budget--; + } while (likely(budget)); + + if ((tsnep_tx_desc_available(tx) >= ((MAX_SKB_FRAGS + 1) * 2)) && + netif_queue_stopped(tx->adapter->netdev)) { + netif_wake_queue(tx->adapter->netdev); + } + + spin_unlock_irqrestore(&tx->lock, flags); + + return (budget != 0); +} + +static int tsnep_tx_open(struct tsnep_adapter *adapter, struct tsnep_tx *tx, + void *addr) +{ + dma_addr_t dma; + int retval; + + memset(tx, 0, sizeof(*tx)); + tx->adapter = adapter; + tx->addr = addr; + + retval = tsnep_tx_ring_init(tx); + if (retval) + return retval; + + dma = tx->entry[0].desc_dma | TSNEP_RESET_OWNER_COUNTER; + iowrite32(DMA_ADDR_LOW(dma), tx->addr + TSNEP_TX_DESC_ADDR_LOW); + iowrite32(DMA_ADDR_HIGH(dma), tx->addr + TSNEP_TX_DESC_ADDR_HIGH); + tx->owner_counter = 1; + tx->increment_owner_counter = TSNEP_RING_SIZE - 1; + + spin_lock_init(&tx->lock); + + return 0; +} + +static void tsnep_tx_close(struct tsnep_tx *tx) +{ + u32 val; + + readx_poll_timeout(ioread32, tx->addr + TSNEP_CONTROL, val, + ((val & TSNEP_CONTROL_TX_ENABLE) == 0), 10000, + 1000000); + + tsnep_tx_ring_cleanup(tx); +} + +static void tsnep_rx_ring_cleanup(struct tsnep_rx *rx) +{ + struct device *dev = &rx->adapter->pdev->dev; + struct tsnep_rx_entry *entry; + int i; + + for (i = 0; i < TSNEP_RING_SIZE; i++) { + entry = &rx->entry[i]; + if (entry->dma) + dma_unmap_single(dev, entry->dma, entry->len, + DMA_FROM_DEVICE); + if (entry->skb) + dev_kfree_skb(entry->skb); + } + + memset(rx->entry, 0, sizeof(rx->entry)); + + for (i = 0; i < TSNEP_RING_PAGE_COUNT; i++) { + if (rx->page[i]) { + dma_free_coherent(dev, PAGE_SIZE, rx->page[i], + rx->page_dma[i]); + rx->page[i] = NULL; + rx->page_dma[i] = 0; + } + } +} + +static int tsnep_rx_alloc_and_map_skb(struct tsnep_rx *rx, + struct tsnep_rx_entry *entry) +{ + struct device *dev = &rx->adapter->pdev->dev; + struct sk_buff *skb; + dma_addr_t dma; + + skb = __netdev_alloc_skb(rx->adapter->netdev, RX_SKB_ALLOC_LENGTH, + GFP_ATOMIC | GFP_DMA); + if (!skb) + return -ENOMEM; + + skb_reserve(skb, RX_SKB_RESERVE); + + dma = dma_map_single(dev, skb->data, RX_SKB_LENGTH, + DMA_FROM_DEVICE); + if (dma_mapping_error(dev, dma)) { + dev_kfree_skb(skb); + return -ENOMEM; + } + + entry->skb = skb; + dma_unmap_len_set(entry, len, RX_SKB_LENGTH); + dma_unmap_addr_set(entry, dma, dma); + entry->desc->rx = dma; + + return 0; +} + +static int tsnep_rx_ring_init(struct tsnep_rx *rx) +{ + struct device *dev = &rx->adapter->pdev->dev; + struct tsnep_rx_entry *entry; + struct tsnep_rx_entry *next_entry; + int i, j; + int retval; + + for (i = 0; i < TSNEP_RING_PAGE_COUNT; i++) { + rx->page[i] = + dma_alloc_coherent(dev, PAGE_SIZE, &rx->page_dma[i], + GFP_KERNEL); + if (!rx->page[i]) { + retval = -ENOMEM; + goto failed; + } + for (j = 0; j < TSNEP_RING_ENTRIES_PER_PAGE; j++) { + entry = &rx->entry[TSNEP_RING_ENTRIES_PER_PAGE * i + j]; + entry->desc_wb = (struct tsnep_rx_desc_wb *) + (((u8 *)rx->page[i]) + TSNEP_DESC_SIZE * j); + entry->desc = (struct tsnep_rx_desc *) + (((u8 *)entry->desc_wb) + TSNEP_DESC_OFFSET); + entry->desc_dma = rx->page_dma[i] + TSNEP_DESC_SIZE * j; + } + } + for (i = 0; i < TSNEP_RING_SIZE; i++) { + entry = &rx->entry[i]; + next_entry = &rx->entry[(i + 1) % TSNEP_RING_SIZE]; + entry->desc->next = next_entry->desc_dma; + + retval = tsnep_rx_alloc_and_map_skb(rx, entry); + if (retval) + goto failed; + } + + return 0; + +failed: + tsnep_rx_ring_cleanup(rx); + return retval; +} + +static void tsnep_rx_activate(struct tsnep_rx *rx, int index) +{ + struct tsnep_rx_entry *entry = &rx->entry[index]; + + /* RX_SKB_LENGTH is a multiple of 4 */ + entry->properties = entry->len & TSNEP_DESC_LENGTH_MASK; + entry->properties |= TSNEP_DESC_INTERRUPT_FLAG; + if (index == rx->increment_owner_counter) { + rx->owner_counter++; + if (rx->owner_counter == 4) + rx->owner_counter = 1; + rx->increment_owner_counter--; + if (rx->increment_owner_counter < 0) + rx->increment_owner_counter = TSNEP_RING_SIZE - 1; + } + entry->properties |= + (rx->owner_counter << TSNEP_DESC_OWNER_COUNTER_SHIFT) & + TSNEP_DESC_OWNER_COUNTER_MASK; + + dma_wmb(); + + entry->desc->properties = entry->properties; +} + +static int tsnep_rx_napi_poll(struct napi_struct *napi, int budget) +{ + struct tsnep_adapter *adapter = container_of(napi, struct tsnep_adapter, + napi); + struct tsnep_rx *rx = &adapter->rx[0]; + struct tsnep_tx *tx = &adapter->tx[0]; + struct device *dev = &adapter->pdev->dev; + bool complete; + int done = 0; + struct tsnep_rx_entry *entry; + struct sk_buff *skb; + DEFINE_DMA_UNMAP_ADDR(dma); + DEFINE_DMA_UNMAP_LEN(len); + int length; + int retval; + + complete = tsnep_tx_napi_poll(tx, budget); + + while (likely(done < budget)) { + entry = &rx->entry[rx->read]; + if ((entry->desc_wb->properties & + TSNEP_DESC_OWNER_COUNTER_MASK) != + (entry->properties & TSNEP_DESC_OWNER_COUNTER_MASK)) + break; + + dma_rmb(); + + skb = entry->skb; + dma = entry->dma; + len = entry->len; + + /* forward skb only if allocation is successful, otherwise + * skb is reused and frame dropped + */ + retval = tsnep_rx_alloc_and_map_skb(rx, entry); + if (!retval) { + dma_unmap_single(dev, dma, len, DMA_FROM_DEVICE); + + length = entry->desc_wb->properties & + TSNEP_DESC_LENGTH_MASK; + skb_put(skb, length - ETH_FCS_LEN); + if (adapter->hwtstamp_config.rx_filter == + HWTSTAMP_FILTER_ALL) { + struct skb_shared_hwtstamps *hwtstamps = + skb_hwtstamps(skb); + struct tsnep_rx_inline *rx_inline = + (struct tsnep_rx_inline *)skb->data; + + memset(hwtstamps, 0, sizeof(*hwtstamps)); + hwtstamps->hwtstamp = + ns_to_ktime(rx_inline->timestamp); + } + skb_pull(skb, TSNEP_RX_INLINE_METADATA_SIZE); + skb->protocol = eth_type_trans(skb, + rx->adapter->netdev); + + rx->packets++; + rx->bytes += length - TSNEP_RX_INLINE_METADATA_SIZE; + if (skb->pkt_type == PACKET_MULTICAST) + rx->multicast++; + + napi_gro_receive(napi, skb); + done++; + } else { + rx->dropped++; + } + + tsnep_rx_activate(rx, rx->read); + iowrite32(TSNEP_CONTROL_RX_ENABLE, rx->addr + TSNEP_CONTROL); + + rx->read = (rx->read + 1) % TSNEP_RING_SIZE; + } + if (done >= budget) + complete = false; + + /* if all work not completed, return budget and keep polling */ + if (!complete) + return budget; + + if (likely(napi_complete_done(napi, done))) + tsnep_enable_irq(rx->adapter, ECM_INT_TX_0 | ECM_INT_RX_0); + + return min(done, budget - 1); +} + +static int tsnep_rx_open(struct tsnep_adapter *adapter, struct tsnep_rx *rx, + void *addr) +{ + dma_addr_t dma; + int i; + int retval; + + memset(rx, 0, sizeof(*rx)); + rx->adapter = adapter; + rx->addr = addr; + + retval = tsnep_rx_ring_init(rx); + if (retval) + return retval; + + dma = rx->entry[0].desc_dma | TSNEP_RESET_OWNER_COUNTER; + iowrite32(DMA_ADDR_LOW(dma), rx->addr + TSNEP_RX_DESC_ADDR_LOW); + iowrite32(DMA_ADDR_HIGH(dma), rx->addr + TSNEP_RX_DESC_ADDR_HIGH); + rx->owner_counter = 1; + rx->increment_owner_counter = TSNEP_RING_SIZE - 1; + + for (i = 0; i < TSNEP_RING_SIZE; i++) + tsnep_rx_activate(rx, i); + + iowrite32(TSNEP_CONTROL_RX_ENABLE, rx->addr + TSNEP_CONTROL); + + return 0; +} + +static void tsnep_rx_close(struct tsnep_rx *rx) +{ + u32 val; + + iowrite32(TSNEP_CONTROL_RX_DISABLE, rx->addr + TSNEP_CONTROL); + readx_poll_timeout(ioread32, rx->addr + TSNEP_CONTROL, val, + ((val & TSNEP_CONTROL_RX_ENABLE) == 0), 10000, + 1000000); + + tsnep_rx_ring_cleanup(rx); +} + +static int tsnep_netdev_open(struct net_device *netdev) +{ + struct tsnep_adapter *adapter = netdev_priv(netdev); + void *addr; + int i; + int retval; + + retval = tsnep_phy_open(adapter); + if (retval) + return retval; + + for (i = 0; i < adapter->num_tx_queues; i++) { + addr = adapter->addr + TSNEP_QUEUE(i); + retval = tsnep_tx_open(adapter, &adapter->tx[i], addr); + if (retval) + goto tx_failed; + } + retval = netif_set_real_num_tx_queues(adapter->netdev, + adapter->num_tx_queues); + if (retval) + goto tx_failed; + for (i = 0; i < adapter->num_rx_queues; i++) { + addr = adapter->addr + TSNEP_QUEUE(i); + retval = tsnep_rx_open(adapter, &adapter->rx[i], addr); + if (retval) + goto rx_failed; + } + retval = netif_set_real_num_rx_queues(adapter->netdev, + adapter->num_rx_queues); + if (retval) + goto rx_failed; + + netif_napi_add(adapter->netdev, &adapter->napi, tsnep_rx_napi_poll, 64); + napi_enable(&adapter->napi); + + tsnep_enable_irq(adapter, ECM_INT_TX_0 | ECM_INT_RX_0); + + return 0; + +rx_failed: + for (i = 0; i < adapter->num_rx_queues; i++) + tsnep_rx_close(&adapter->rx[i]); +tx_failed: + for (i = 0; i < adapter->num_tx_queues; i++) + tsnep_tx_close(&adapter->tx[i]); + tsnep_phy_close(adapter); + return retval; +} + +static int tsnep_netdev_close(struct net_device *netdev) +{ + struct tsnep_adapter *adapter = netdev_priv(netdev); + int i; + + tsnep_disable_irq(adapter, ECM_INT_TX_0 | ECM_INT_RX_0); + + napi_disable(&adapter->napi); + netif_napi_del(&adapter->napi); + + for (i = 0; i < adapter->num_rx_queues; i++) + tsnep_rx_close(&adapter->rx[i]); + for (i = 0; i < adapter->num_tx_queues; i++) + tsnep_tx_close(&adapter->tx[i]); + + tsnep_phy_close(adapter); + + return 0; +} + +static netdev_tx_t tsnep_netdev_xmit_frame(struct sk_buff *skb, + struct net_device *netdev) +{ + struct tsnep_adapter *adapter = netdev_priv(netdev); + u16 queue_mapping = skb_get_queue_mapping(skb); + + if (queue_mapping >= adapter->num_tx_queues) + queue_mapping = 0; + + return tsnep_xmit_frame_ring(skb, &adapter->tx[queue_mapping]); +} + +static int tsnep_netdev_ioctl(struct net_device *netdev, struct ifreq *ifr, + int cmd) +{ + if (!netif_running(netdev)) + return -EINVAL; + if (cmd == SIOCSHWTSTAMP || cmd == SIOCGHWTSTAMP) + return tsnep_ptp_ioctl(netdev, ifr, cmd); + return phy_mii_ioctl(netdev->phydev, ifr, cmd); +} + +static void tsnep_netdev_set_multicast(struct net_device *netdev) +{ + struct tsnep_adapter *adapter = netdev_priv(netdev); + + u16 rx_filter = 0; + + /* configured MAC address and broadcasts are never filtered */ + if (netdev->flags & IFF_PROMISC) { + rx_filter |= TSNEP_RX_FILTER_ACCEPT_ALL_MULTICASTS; + rx_filter |= TSNEP_RX_FILTER_ACCEPT_ALL_UNICASTS; + } else if (!netdev_mc_empty(netdev) || (netdev->flags & IFF_ALLMULTI)) { + rx_filter |= TSNEP_RX_FILTER_ACCEPT_ALL_MULTICASTS; + } + iowrite16(rx_filter, adapter->addr + TSNEP_RX_FILTER); +} + +static void tsnep_netdev_get_stats64(struct net_device *netdev, + struct rtnl_link_stats64 *stats) +{ + struct tsnep_adapter *adapter = netdev_priv(netdev); + u32 reg; + u32 val; + int i; + + for (i = 0; i < adapter->num_tx_queues; i++) { + stats->tx_packets += adapter->tx[i].packets; + stats->tx_bytes += adapter->tx[i].bytes; + stats->tx_dropped += adapter->tx[i].dropped; + } + for (i = 0; i < adapter->num_rx_queues; i++) { + stats->rx_packets += adapter->rx[i].packets; + stats->rx_bytes += adapter->rx[i].bytes; + stats->rx_dropped += adapter->rx[i].dropped; + stats->multicast += adapter->rx[i].multicast; + + reg = ioread32(adapter->addr + TSNEP_QUEUE(i) + + TSNEP_RX_STATISTIC); + val = (reg & TSNEP_RX_STATISTIC_NO_DESC_MASK) >> + TSNEP_RX_STATISTIC_NO_DESC_SHIFT; + stats->rx_dropped += val; + val = (reg & TSNEP_RX_STATISTIC_BUFFER_TOO_SMALL_MASK) >> + TSNEP_RX_STATISTIC_BUFFER_TOO_SMALL_SHIFT; + stats->rx_dropped += val; + val = (reg & TSNEP_RX_STATISTIC_FIFO_OVERFLOW_MASK) >> + TSNEP_RX_STATISTIC_FIFO_OVERFLOW_SHIFT; + stats->rx_errors += val; + stats->rx_fifo_errors += val; + val = (reg & TSNEP_RX_STATISTIC_INVALID_FRAME_MASK) >> + TSNEP_RX_STATISTIC_INVALID_FRAME_SHIFT; + stats->rx_errors += val; + stats->rx_frame_errors += val; + } + + reg = ioread32(adapter->addr + ECM_STAT); + val = (reg & ECM_STAT_RX_ERR_MASK) >> ECM_STAT_RX_ERR_SHIFT; + stats->rx_errors += val; + val = (reg & ECM_STAT_INV_FRM_MASK) >> ECM_STAT_INV_FRM_SHIFT; + stats->rx_errors += val; + stats->rx_crc_errors += val; + val = (reg & ECM_STAT_FWD_RX_ERR_MASK) >> ECM_STAT_FWD_RX_ERR_SHIFT; + stats->rx_errors += val; +} + +static void tsnep_mac_set_address(struct tsnep_adapter *adapter, u8 *addr) +{ + iowrite32(*(u32 *)addr, adapter->addr + TSNEP_MAC_ADDRESS_LOW); + iowrite16(*(u16 *)(addr + sizeof(u32)), + adapter->addr + TSNEP_MAC_ADDRESS_HIGH); + + ether_addr_copy(adapter->mac_address, addr); + netif_info(adapter, drv, adapter->netdev, "MAC address set to %pM\n", + addr); +} + +static int tsnep_netdev_set_mac_address(struct net_device *netdev, void *addr) +{ + struct tsnep_adapter *adapter = netdev_priv(netdev); + struct sockaddr *sock_addr = addr; + int retval; + + retval = eth_prepare_mac_addr_change(netdev, sock_addr); + if (retval) + return retval; + ether_addr_copy(netdev->dev_addr, sock_addr->sa_data); + tsnep_mac_set_address(adapter, sock_addr->sa_data); + + return 0; +} + +static const struct net_device_ops tsnep_netdev_ops = { + .ndo_open = tsnep_netdev_open, + .ndo_stop = tsnep_netdev_close, + .ndo_start_xmit = tsnep_netdev_xmit_frame, + .ndo_eth_ioctl = tsnep_netdev_ioctl, + .ndo_set_rx_mode = tsnep_netdev_set_multicast, + + .ndo_get_stats64 = tsnep_netdev_get_stats64, + .ndo_set_mac_address = tsnep_netdev_set_mac_address, + .ndo_setup_tc = tsnep_tc_setup, +}; + +static int tsnep_mac_init(struct tsnep_adapter *adapter) +{ + int retval; + + /* initialize RX filtering, at least configured MAC address and + * broadcast are not filtered + */ + iowrite16(0, adapter->addr + TSNEP_RX_FILTER); + + /* try to get MAC address in the following order: + * - device tree + * - MAC address register if valid + * - random MAC address + */ + retval = of_get_mac_address(adapter->pdev->dev.of_node, + adapter->mac_address); + if (retval == -EPROBE_DEFER) + return retval; + if (retval) { + *(u32 *)adapter->mac_address = + ioread32(adapter->addr + TSNEP_MAC_ADDRESS_LOW); + *(u16 *)(adapter->mac_address + sizeof(u32)) = + ioread16(adapter->addr + TSNEP_MAC_ADDRESS_HIGH); + if (!is_valid_ether_addr(adapter->mac_address)) + eth_random_addr(adapter->mac_address); + } + + tsnep_mac_set_address(adapter, adapter->mac_address); + ether_addr_copy(adapter->netdev->dev_addr, adapter->mac_address); + + return 0; +} + +static int tsnep_mdio_init(struct tsnep_adapter *adapter) +{ + struct device_node *node; + int retval; + + node = of_get_child_by_name(adapter->pdev->dev.of_node, "mdio"); + if (!node) + return 0; + + adapter->mdiobus = devm_mdiobus_alloc(&adapter->pdev->dev); + if (!adapter->mdiobus) { + retval = -ENOMEM; + + goto out; + } + + adapter->mdiobus->priv = (void *)adapter; + adapter->mdiobus->parent = &adapter->pdev->dev; + adapter->mdiobus->read = tsnep_mdiobus_read; + adapter->mdiobus->write = tsnep_mdiobus_write; + adapter->mdiobus->name = TSNEP "-mdiobus"; + snprintf(adapter->mdiobus->id, MII_BUS_ID_SIZE, "%s", + adapter->pdev->name); + + retval = of_mdiobus_register(adapter->mdiobus, node); +out: + of_node_put(node); + + return retval; +} + +static int tsnep_phy_init(struct tsnep_adapter *adapter) +{ + struct device_node *dn; + int retval; + + retval = of_get_phy_mode(adapter->pdev->dev.of_node, + &adapter->phy_mode); + if (retval) + adapter->phy_mode = PHY_INTERFACE_MODE_GMII; + + dn = of_parse_phandle(adapter->pdev->dev.of_node, "phy-handle", 0); + adapter->phydev = of_phy_find_device(dn); + of_node_put(dn); + if (!adapter->phydev && adapter->mdiobus) + adapter->phydev = phy_find_first(adapter->mdiobus); + if (!adapter->phydev) + return -EIO; + + return 0; +} + +static int tsnep_probe(struct platform_device *pdev) +{ + struct tsnep_adapter *adapter; + struct net_device *netdev; + struct resource *io; + u32 type; + int revision; + int version; + int queue_count; + int retval; + + netdev = devm_alloc_etherdev_mqs(&pdev->dev, + sizeof(struct tsnep_adapter), + TSNEP_MAX_QUEUES, TSNEP_MAX_QUEUES); + if (!netdev) + return -ENODEV; + SET_NETDEV_DEV(netdev, &pdev->dev); + adapter = netdev_priv(netdev); + platform_set_drvdata(pdev, adapter); + adapter->pdev = pdev; + adapter->netdev = netdev; + adapter->msg_enable = NETIF_MSG_DRV | NETIF_MSG_PROBE | + NETIF_MSG_LINK | NETIF_MSG_IFUP | + NETIF_MSG_IFDOWN | NETIF_MSG_TX_QUEUED; + + netdev->min_mtu = ETH_MIN_MTU; + netdev->max_mtu = TSNEP_MAX_FRAME_SIZE; + + spin_lock_init(&adapter->irq_lock); + init_waitqueue_head(&adapter->md_wait); + mutex_init(&adapter->gate_control_lock); + + io = platform_get_resource(pdev, IORESOURCE_MEM, 0); + adapter->addr = devm_ioremap_resource(&pdev->dev, io); + if (IS_ERR(adapter->addr)) + return PTR_ERR(adapter->addr); + adapter->size = io->end - io->start + 1; + adapter->irq = platform_get_irq(pdev, 0); + netdev->mem_start = io->start; + netdev->mem_end = io->end; + netdev->irq = adapter->irq; + + type = ioread32(adapter->addr + ECM_TYPE); + revision = (type & ECM_REVISION_MASK) >> ECM_REVISION_SHIFT; + version = (type & ECM_VERSION_MASK) >> ECM_VERSION_SHIFT; + queue_count = (type & ECM_QUEUE_COUNT_MASK) >> ECM_QUEUE_COUNT_SHIFT; + adapter->gate_control = type & ECM_GATE_CONTROL; + + adapter->num_tx_queues = TSNEP_QUEUES; + adapter->num_rx_queues = TSNEP_QUEUES; + + iowrite32(0, adapter->addr + ECM_INT_ENABLE); + retval = devm_request_irq(&adapter->pdev->dev, adapter->irq, tsnep_irq, + 0, TSNEP, adapter); + if (retval != 0) { + dev_err(&adapter->pdev->dev, "can't get assigned irq %d.", + adapter->irq); + return retval; + } + tsnep_enable_irq(adapter, ECM_INT_MD | ECM_INT_LINK); + + retval = tsnep_mac_init(adapter); + if (retval) + goto mac_init_failed; + + retval = tsnep_mdio_init(adapter); + if (retval) + goto mdio_init_failed; + + retval = tsnep_phy_init(adapter); + if (retval) + goto phy_init_failed; + + retval = tsnep_ptp_init(adapter); + if (retval) + goto ptp_init_failed; + + retval = tsnep_tc_init(adapter); + if (retval) + goto tc_init_failed; + + netdev->netdev_ops = &tsnep_netdev_ops; + netdev->ethtool_ops = &tsnep_ethtool_ops; + netdev->features = NETIF_F_SG; + netdev->hw_features = netdev->features; + + /* carrier off reporting is important to ethtool even BEFORE open */ + netif_carrier_off(netdev); + + retval = register_netdev(netdev); + if (retval) + goto register_failed; + + dev_info(&adapter->pdev->dev, "device version %d.%02d\n", version, + revision); + if (adapter->gate_control) + dev_info(&adapter->pdev->dev, "gate control detected\n"); + + return 0; + + unregister_netdev(adapter->netdev); +register_failed: + tsnep_tc_cleanup(adapter); +tc_init_failed: + tsnep_ptp_cleanup(adapter); +ptp_init_failed: +phy_init_failed: + if (adapter->mdiobus) + mdiobus_unregister(adapter->mdiobus); +mdio_init_failed: +mac_init_failed: + return retval; +} + +static int tsnep_remove(struct platform_device *pdev) +{ + struct tsnep_adapter *adapter = platform_get_drvdata(pdev); + + unregister_netdev(adapter->netdev); + + tsnep_tc_cleanup(adapter); + + tsnep_ptp_cleanup(adapter); + + if (adapter->mdiobus) + mdiobus_unregister(adapter->mdiobus); + + iowrite32(0, adapter->addr + ECM_INT_ENABLE); + + return 0; +} + +static const struct of_device_id tsnep_of_match[] = { + { .compatible = "engleder,tsnep", }, +{ }, +}; +MODULE_DEVICE_TABLE(of, tsnep_of_match); + +static struct platform_driver tsnep_driver = { + .driver = { + .name = TSNEP, + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(tsnep_of_match), + }, + .probe = tsnep_probe, + .remove = tsnep_remove, +}; +module_platform_driver(tsnep_driver); + +MODULE_AUTHOR("Gerhard Engleder <gerhard@engleder-embedded.com>"); +MODULE_DESCRIPTION("TSN endpoint Ethernet MAC driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/ethernet/engleder/tsnep_ptp.c b/drivers/net/ethernet/engleder/tsnep_ptp.c new file mode 100644 index 000000000000..4bfb4d8508f5 --- /dev/null +++ b/drivers/net/ethernet/engleder/tsnep_ptp.c @@ -0,0 +1,221 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (C) 2021 Gerhard Engleder <gerhard@engleder-embedded.com> */ + +#include "tsnep.h" + +void tsnep_get_system_time(struct tsnep_adapter *adapter, u64 *time) +{ + u32 high_before; + u32 low; + u32 high; + + /* read high dword twice to detect overrun */ + high = ioread32(adapter->addr + ECM_SYSTEM_TIME_HIGH); + do { + low = ioread32(adapter->addr + ECM_SYSTEM_TIME_LOW); + high_before = high; + high = ioread32(adapter->addr + ECM_SYSTEM_TIME_HIGH); + } while (high != high_before); + *time = (((u64)high) << 32) | ((u64)low); +} + +int tsnep_ptp_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) +{ + struct tsnep_adapter *adapter = netdev_priv(netdev); + struct hwtstamp_config config; + + if (!ifr) + return -EINVAL; + + if (cmd == SIOCSHWTSTAMP) { + if (copy_from_user(&config, ifr->ifr_data, sizeof(config))) + return -EFAULT; + + if (config.flags) + return -EINVAL; + + switch (config.tx_type) { + case HWTSTAMP_TX_OFF: + case HWTSTAMP_TX_ON: + break; + default: + return -ERANGE; + } + + switch (config.rx_filter) { + case HWTSTAMP_FILTER_NONE: + break; + case HWTSTAMP_FILTER_ALL: + case HWTSTAMP_FILTER_PTP_V1_L4_EVENT: + case HWTSTAMP_FILTER_PTP_V1_L4_SYNC: + case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ: + case HWTSTAMP_FILTER_PTP_V2_L4_EVENT: + case HWTSTAMP_FILTER_PTP_V2_L4_SYNC: + case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ: + case HWTSTAMP_FILTER_PTP_V2_L2_EVENT: + case HWTSTAMP_FILTER_PTP_V2_L2_SYNC: + case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ: + case HWTSTAMP_FILTER_PTP_V2_EVENT: + case HWTSTAMP_FILTER_PTP_V2_SYNC: + case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ: + case HWTSTAMP_FILTER_NTP_ALL: + config.rx_filter = HWTSTAMP_FILTER_ALL; + break; + default: + return -ERANGE; + } + + memcpy(&adapter->hwtstamp_config, &config, + sizeof(adapter->hwtstamp_config)); + } + + if (copy_to_user(ifr->ifr_data, &adapter->hwtstamp_config, + sizeof(adapter->hwtstamp_config))) + return -EFAULT; + + return 0; +} + +static int tsnep_ptp_adjfine(struct ptp_clock_info *ptp, long scaled_ppm) +{ + struct tsnep_adapter *adapter = container_of(ptp, struct tsnep_adapter, + ptp_clock_info); + bool negative = false; + u64 rate_offset; + + if (scaled_ppm < 0) { + scaled_ppm = -scaled_ppm; + negative = true; + } + + /* convert from 16 bit to 32 bit binary fractional, divide by 1000000 to + * eliminate ppm, multiply with 8 to compensate 8ns clock cycle time, + * simplify calculation because 15625 * 8 = 1000000 / 8 + */ + rate_offset = scaled_ppm; + rate_offset <<= 16 - 3; + rate_offset = div_u64(rate_offset, 15625); + + rate_offset &= ECM_CLOCK_RATE_OFFSET_MASK; + if (negative) + rate_offset |= ECM_CLOCK_RATE_OFFSET_SIGN; + iowrite32(rate_offset & 0xFFFFFFFF, adapter->addr + ECM_CLOCK_RATE); + + return 0; +} + +static int tsnep_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta) +{ + struct tsnep_adapter *adapter = container_of(ptp, struct tsnep_adapter, + ptp_clock_info); + u64 system_time; + unsigned long flags; + + spin_lock_irqsave(&adapter->ptp_lock, flags); + + tsnep_get_system_time(adapter, &system_time); + + system_time += delta; + + /* high dword is buffered in hardware and synchronously written to + * system time when low dword is written + */ + iowrite32(system_time >> 32, adapter->addr + ECM_SYSTEM_TIME_HIGH); + iowrite32(system_time & 0xFFFFFFFF, + adapter->addr + ECM_SYSTEM_TIME_LOW); + + spin_unlock_irqrestore(&adapter->ptp_lock, flags); + + return 0; +} + +static int tsnep_ptp_gettimex64(struct ptp_clock_info *ptp, + struct timespec64 *ts, + struct ptp_system_timestamp *sts) +{ + struct tsnep_adapter *adapter = container_of(ptp, struct tsnep_adapter, + ptp_clock_info); + u32 high_before; + u32 low; + u32 high; + u64 system_time; + + /* read high dword twice to detect overrun */ + high = ioread32(adapter->addr + ECM_SYSTEM_TIME_HIGH); + do { + ptp_read_system_prets(sts); + low = ioread32(adapter->addr + ECM_SYSTEM_TIME_LOW); + ptp_read_system_postts(sts); + high_before = high; + high = ioread32(adapter->addr + ECM_SYSTEM_TIME_HIGH); + } while (high != high_before); + system_time = (((u64)high) << 32) | ((u64)low); + + *ts = ns_to_timespec64(system_time); + + return 0; +} + +static int tsnep_ptp_settime64(struct ptp_clock_info *ptp, + const struct timespec64 *ts) +{ + struct tsnep_adapter *adapter = container_of(ptp, struct tsnep_adapter, + ptp_clock_info); + u64 system_time = timespec64_to_ns(ts); + unsigned long flags; + + spin_lock_irqsave(&adapter->ptp_lock, flags); + + /* high dword is buffered in hardware and synchronously written to + * system time when low dword is written + */ + iowrite32(system_time >> 32, adapter->addr + ECM_SYSTEM_TIME_HIGH); + iowrite32(system_time & 0xFFFFFFFF, + adapter->addr + ECM_SYSTEM_TIME_LOW); + + spin_unlock_irqrestore(&adapter->ptp_lock, flags); + + return 0; +} + +int tsnep_ptp_init(struct tsnep_adapter *adapter) +{ + int retval = 0; + + adapter->hwtstamp_config.rx_filter = HWTSTAMP_FILTER_NONE; + adapter->hwtstamp_config.tx_type = HWTSTAMP_TX_OFF; + + snprintf(adapter->ptp_clock_info.name, 16, "%s", TSNEP); + adapter->ptp_clock_info.owner = THIS_MODULE; + /* at most 2^-1ns adjustment every clock cycle for 8ns clock cycle time, + * stay slightly below because only bits below 2^-1ns are supported + */ + adapter->ptp_clock_info.max_adj = (500000000 / 8 - 1); + adapter->ptp_clock_info.adjfine = tsnep_ptp_adjfine; + adapter->ptp_clock_info.adjtime = tsnep_ptp_adjtime; + adapter->ptp_clock_info.gettimex64 = tsnep_ptp_gettimex64; + adapter->ptp_clock_info.settime64 = tsnep_ptp_settime64; + + spin_lock_init(&adapter->ptp_lock); + + adapter->ptp_clock = ptp_clock_register(&adapter->ptp_clock_info, + &adapter->pdev->dev); + if (IS_ERR(adapter->ptp_clock)) { + netdev_err(adapter->netdev, "ptp_clock_register failed\n"); + + retval = PTR_ERR(adapter->ptp_clock); + adapter->ptp_clock = NULL; + } else if (adapter->ptp_clock) { + netdev_info(adapter->netdev, "PHC added\n"); + } + + return retval; +} + +void tsnep_ptp_cleanup(struct tsnep_adapter *adapter) +{ + if (adapter->ptp_clock) { + ptp_clock_unregister(adapter->ptp_clock); + netdev_info(adapter->netdev, "PHC removed\n"); + } +} diff --git a/drivers/net/ethernet/engleder/tsnep_tc.c b/drivers/net/ethernet/engleder/tsnep_tc.c new file mode 100644 index 000000000000..2b88c1e2eb2c --- /dev/null +++ b/drivers/net/ethernet/engleder/tsnep_tc.c @@ -0,0 +1,442 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (C) 2021 Gerhard Engleder <gerhard@engleder-embedded.com> */ + +#include "tsnep.h" + +#include <net/pkt_sched.h> + +/* save one operation at the end for additional operation at list change */ +#define TSNEP_MAX_GCL_NUM (TSNEP_GCL_COUNT - 1) + +static int tsnep_validate_gcl(struct tc_taprio_qopt_offload *qopt) +{ + int i; + u64 cycle_time; + + if (!qopt->cycle_time) + return -ERANGE; + if (qopt->num_entries > TSNEP_MAX_GCL_NUM) + return -EINVAL; + cycle_time = 0; + for (i = 0; i < qopt->num_entries; i++) { + if (qopt->entries[i].command != TC_TAPRIO_CMD_SET_GATES) + return -EINVAL; + if (qopt->entries[i].gate_mask & ~TSNEP_GCL_MASK) + return -EINVAL; + if (qopt->entries[i].interval < TSNEP_GCL_MIN_INTERVAL) + return -EINVAL; + cycle_time += qopt->entries[i].interval; + } + if (qopt->cycle_time != cycle_time) + return -EINVAL; + if (qopt->cycle_time_extension >= qopt->cycle_time) + return -EINVAL; + + return 0; +} + +static void tsnep_write_gcl_operation(struct tsnep_gcl *gcl, int index, + u32 properties, u32 interval, bool flush) +{ + void *addr = gcl->addr + sizeof(struct tsnep_gcl_operation) * index; + + gcl->operation[index].properties = properties; + gcl->operation[index].interval = interval; + + iowrite32(properties, addr); + iowrite32(interval, addr + sizeof(u32)); + + if (flush) { + /* flush write with read access */ + ioread32(addr); + } +} + +static u64 tsnep_change_duration(struct tsnep_gcl *gcl, int index) +{ + u64 duration; + int count; + + /* change needs to be triggered one or two operations before start of + * new gate control list + * - change is triggered at start of operation (minimum one operation) + * - operation with adjusted interval is inserted on demand to exactly + * meet the start of the new gate control list (optional) + * + * additionally properties are read directly after start of previous + * operation + * + * therefore, three operations needs to be considered for the limit + */ + duration = 0; + count = 3; + while (count) { + duration += gcl->operation[index].interval; + + index--; + if (index < 0) + index = gcl->count - 1; + + count--; + } + + return duration; +} + +static void tsnep_write_gcl(struct tsnep_gcl *gcl, + struct tc_taprio_qopt_offload *qopt) +{ + int i; + u32 properties; + u64 extend; + u64 cut; + + gcl->base_time = ktime_to_ns(qopt->base_time); + gcl->cycle_time = qopt->cycle_time; + gcl->cycle_time_extension = qopt->cycle_time_extension; + + for (i = 0; i < qopt->num_entries; i++) { + properties = qopt->entries[i].gate_mask; + if (i == (qopt->num_entries - 1)) + properties |= TSNEP_GCL_LAST; + + tsnep_write_gcl_operation(gcl, i, properties, + qopt->entries[i].interval, true); + } + gcl->count = qopt->num_entries; + + /* calculate change limit; i.e., the time needed between enable and + * start of new gate control list + */ + + /* case 1: extend cycle time for change + * - change duration of last operation + * - cycle time extension + */ + extend = tsnep_change_duration(gcl, gcl->count - 1); + extend += gcl->cycle_time_extension; + + /* case 2: cut cycle time for change + * - maximum change duration + */ + cut = 0; + for (i = 0; i < gcl->count; i++) + cut = max(cut, tsnep_change_duration(gcl, i)); + + /* use maximum, because the actual case (extend or cut) can be + * determined only after limit is known (chicken-and-egg problem) + */ + gcl->change_limit = max(extend, cut); +} + +static u64 tsnep_gcl_start_after(struct tsnep_gcl *gcl, u64 limit) +{ + u64 start = gcl->base_time; + u64 n; + + if (start <= limit) { + n = div64_u64(limit - start, gcl->cycle_time); + start += (n + 1) * gcl->cycle_time; + } + + return start; +} + +static u64 tsnep_gcl_start_before(struct tsnep_gcl *gcl, u64 limit) +{ + u64 start = gcl->base_time; + u64 n; + + n = div64_u64(limit - start, gcl->cycle_time); + start += n * gcl->cycle_time; + if (start == limit) + start -= gcl->cycle_time; + + return start; +} + +static u64 tsnep_set_gcl_change(struct tsnep_gcl *gcl, int index, u64 change, + bool insert) +{ + /* previous operation triggers change and properties are evaluated at + * start of operation + */ + if (index == 0) + index = gcl->count - 1; + else + index = index - 1; + change -= gcl->operation[index].interval; + + /* optionally change to new list with additional operation in between */ + if (insert) { + void *addr = gcl->addr + + sizeof(struct tsnep_gcl_operation) * index; + + gcl->operation[index].properties |= TSNEP_GCL_INSERT; + iowrite32(gcl->operation[index].properties, addr); + } + + return change; +} + +static void tsnep_clean_gcl(struct tsnep_gcl *gcl) +{ + int i; + u32 mask = TSNEP_GCL_LAST | TSNEP_GCL_MASK; + void *addr; + + /* search for insert operation and reset properties */ + for (i = 0; i < gcl->count; i++) { + if (gcl->operation[i].properties & ~mask) { + addr = gcl->addr + + sizeof(struct tsnep_gcl_operation) * i; + + gcl->operation[i].properties &= mask; + iowrite32(gcl->operation[i].properties, addr); + + break; + } + } +} + +static u64 tsnep_insert_gcl_operation(struct tsnep_gcl *gcl, int ref, + u64 change, u32 interval) +{ + u32 properties; + + properties = gcl->operation[ref].properties & TSNEP_GCL_MASK; + /* change to new list directly after inserted operation */ + properties |= TSNEP_GCL_CHANGE; + + /* last operation of list is reserved to insert operation */ + tsnep_write_gcl_operation(gcl, TSNEP_GCL_COUNT - 1, properties, + interval, false); + + return tsnep_set_gcl_change(gcl, ref, change, true); +} + +static u64 tsnep_extend_gcl(struct tsnep_gcl *gcl, u64 start, u32 extension) +{ + int ref = gcl->count - 1; + u32 interval = gcl->operation[ref].interval + extension; + + start -= gcl->operation[ref].interval; + + return tsnep_insert_gcl_operation(gcl, ref, start, interval); +} + +static u64 tsnep_cut_gcl(struct tsnep_gcl *gcl, u64 start, u64 cycle_time) +{ + u64 sum = 0; + int i; + + /* find operation which shall be cutted */ + for (i = 0; i < gcl->count; i++) { + u64 sum_tmp = sum + gcl->operation[i].interval; + u64 interval; + + /* sum up operations as long as cycle time is not exceeded */ + if (sum_tmp > cycle_time) + break; + + /* remaining interval must be big enough for hardware */ + interval = cycle_time - sum_tmp; + if (interval > 0 && interval < TSNEP_GCL_MIN_INTERVAL) + break; + + sum = sum_tmp; + } + if (sum == cycle_time) { + /* no need to cut operation itself or whole cycle + * => change exactly at operation + */ + return tsnep_set_gcl_change(gcl, i, start + sum, false); + } + return tsnep_insert_gcl_operation(gcl, i, start + sum, + cycle_time - sum); +} + +static int tsnep_enable_gcl(struct tsnep_adapter *adapter, + struct tsnep_gcl *gcl, struct tsnep_gcl *curr) +{ + u64 system_time; + u64 timeout; + u64 limit; + + /* estimate timeout limit after timeout enable, actually timeout limit + * in hardware will be earlier than estimate so we are on the safe side + */ + tsnep_get_system_time(adapter, &system_time); + timeout = system_time + TSNEP_GC_TIMEOUT; + + if (curr) + limit = timeout + curr->change_limit; + else + limit = timeout; + + gcl->start_time = tsnep_gcl_start_after(gcl, limit); + + /* gate control time register is only 32bit => time shall be in the near + * future (no driver support for far future implemented) + */ + if ((gcl->start_time - system_time) >= U32_MAX) + return -EAGAIN; + + if (curr) { + /* change gate control list */ + u64 last; + u64 change; + + last = tsnep_gcl_start_before(curr, gcl->start_time); + if ((last + curr->cycle_time) == gcl->start_time) + change = tsnep_cut_gcl(curr, last, + gcl->start_time - last); + else if (((gcl->start_time - last) <= + curr->cycle_time_extension) || + ((gcl->start_time - last) <= TSNEP_GCL_MIN_INTERVAL)) + change = tsnep_extend_gcl(curr, last, + gcl->start_time - last); + else + change = tsnep_cut_gcl(curr, last, + gcl->start_time - last); + + WARN_ON(change <= timeout); + gcl->change = true; + iowrite32(change & 0xFFFFFFFF, adapter->addr + TSNEP_GC_CHANGE); + } else { + /* start gate control list */ + WARN_ON(gcl->start_time <= timeout); + gcl->change = false; + iowrite32(gcl->start_time & 0xFFFFFFFF, + adapter->addr + TSNEP_GC_TIME); + } + + return 0; +} + +static int tsnep_taprio(struct tsnep_adapter *adapter, + struct tc_taprio_qopt_offload *qopt) +{ + struct tsnep_gcl *gcl; + struct tsnep_gcl *curr; + int retval; + + if (!adapter->gate_control) + return -EOPNOTSUPP; + + if (!qopt->enable) { + /* disable gate control if active */ + mutex_lock(&adapter->gate_control_lock); + + if (adapter->gate_control_active) { + iowrite8(TSNEP_GC_DISABLE, adapter->addr + TSNEP_GC); + adapter->gate_control_active = false; + } + + mutex_unlock(&adapter->gate_control_lock); + + return 0; + } + + retval = tsnep_validate_gcl(qopt); + if (retval) + return retval; + + mutex_lock(&adapter->gate_control_lock); + + gcl = &adapter->gcl[adapter->next_gcl]; + tsnep_write_gcl(gcl, qopt); + + /* select current gate control list if active */ + if (adapter->gate_control_active) { + if (adapter->next_gcl == 0) + curr = &adapter->gcl[1]; + else + curr = &adapter->gcl[0]; + } else { + curr = NULL; + } + + for (;;) { + /* start timeout which discards late enable, this helps ensuring + * that start/change time are in the future at enable + */ + iowrite8(TSNEP_GC_ENABLE_TIMEOUT, adapter->addr + TSNEP_GC); + + retval = tsnep_enable_gcl(adapter, gcl, curr); + if (retval) { + mutex_unlock(&adapter->gate_control_lock); + + return retval; + } + + /* enable gate control list */ + if (adapter->next_gcl == 0) + iowrite8(TSNEP_GC_ENABLE_A, adapter->addr + TSNEP_GC); + else + iowrite8(TSNEP_GC_ENABLE_B, adapter->addr + TSNEP_GC); + + /* done if timeout did not happen */ + if (!(ioread32(adapter->addr + TSNEP_GC) & + TSNEP_GC_TIMEOUT_SIGNAL)) + break; + + /* timeout is acknowledged with any enable */ + iowrite8(TSNEP_GC_ENABLE_A, adapter->addr + TSNEP_GC); + + if (curr) + tsnep_clean_gcl(curr); + + /* retry because of timeout */ + } + + adapter->gate_control_active = true; + + if (adapter->next_gcl == 0) + adapter->next_gcl = 1; + else + adapter->next_gcl = 0; + + mutex_unlock(&adapter->gate_control_lock); + + return 0; +} + +int tsnep_tc_setup(struct net_device *netdev, enum tc_setup_type type, + void *type_data) +{ + struct tsnep_adapter *adapter = netdev_priv(netdev); + + switch (type) { + case TC_SETUP_QDISC_TAPRIO: + return tsnep_taprio(adapter, type_data); + default: + return -EOPNOTSUPP; + } +} + +int tsnep_tc_init(struct tsnep_adapter *adapter) +{ + if (!adapter->gate_control) + return 0; + + /* open all gates */ + iowrite8(TSNEP_GC_DISABLE, adapter->addr + TSNEP_GC); + iowrite32(TSNEP_GC_OPEN | TSNEP_GC_NEXT_OPEN, adapter->addr + TSNEP_GC); + + adapter->gcl[0].addr = adapter->addr + TSNEP_GCL_A; + adapter->gcl[1].addr = adapter->addr + TSNEP_GCL_B; + + return 0; +} + +void tsnep_tc_cleanup(struct tsnep_adapter *adapter) +{ + if (!adapter->gate_control) + return; + + if (adapter->gate_control_active) { + iowrite8(TSNEP_GC_DISABLE, adapter->addr + TSNEP_GC); + adapter->gate_control_active = false; + } +} diff --git a/drivers/net/ethernet/engleder/tsnep_test.c b/drivers/net/ethernet/engleder/tsnep_test.c new file mode 100644 index 000000000000..1581d6b22232 --- /dev/null +++ b/drivers/net/ethernet/engleder/tsnep_test.c @@ -0,0 +1,811 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (C) 2021 Gerhard Engleder <gerhard@engleder-embedded.com> */ + +#include "tsnep.h" + +#include <net/pkt_sched.h> + +enum tsnep_test { + TSNEP_TEST_ENABLE = 0, + TSNEP_TEST_TAPRIO, + TSNEP_TEST_TAPRIO_CHANGE, + TSNEP_TEST_TAPRIO_EXTENSION, +}; + +static const char tsnep_test_strings[][ETH_GSTRING_LEN] = { + "Enable timeout (offline)", + "TAPRIO (offline)", + "TAPRIO change (offline)", + "TAPRIO extension (offline)", +}; + +#define TSNEP_TEST_COUNT (sizeof(tsnep_test_strings) / ETH_GSTRING_LEN) + +static bool enable_gc_timeout(struct tsnep_adapter *adapter) +{ + iowrite8(TSNEP_GC_ENABLE_TIMEOUT, adapter->addr + TSNEP_GC); + if (!(ioread32(adapter->addr + TSNEP_GC) & TSNEP_GC_TIMEOUT_ACTIVE)) + return false; + + return true; +} + +static bool gc_timeout_signaled(struct tsnep_adapter *adapter) +{ + if (ioread32(adapter->addr + TSNEP_GC) & TSNEP_GC_TIMEOUT_SIGNAL) + return true; + + return false; +} + +static bool ack_gc_timeout(struct tsnep_adapter *adapter) +{ + iowrite8(TSNEP_GC_ENABLE_TIMEOUT, adapter->addr + TSNEP_GC); + if (ioread32(adapter->addr + TSNEP_GC) & + (TSNEP_GC_TIMEOUT_ACTIVE | TSNEP_GC_TIMEOUT_SIGNAL)) + return false; + return true; +} + +static bool enable_gc(struct tsnep_adapter *adapter, bool a) +{ + u8 enable; + u8 active; + + if (a) { + enable = TSNEP_GC_ENABLE_A; + active = TSNEP_GC_ACTIVE_A; + } else { + enable = TSNEP_GC_ENABLE_B; + active = TSNEP_GC_ACTIVE_B; + } + + iowrite8(enable, adapter->addr + TSNEP_GC); + if (!(ioread32(adapter->addr + TSNEP_GC) & active)) + return false; + + return true; +} + +static bool disable_gc(struct tsnep_adapter *adapter) +{ + iowrite8(TSNEP_GC_DISABLE, adapter->addr + TSNEP_GC); + if (ioread32(adapter->addr + TSNEP_GC) & + (TSNEP_GC_ACTIVE_A | TSNEP_GC_ACTIVE_B)) + return false; + + return true; +} + +static bool gc_delayed_enable(struct tsnep_adapter *adapter, bool a, int delay) +{ + u64 before, after; + u32 time; + bool enabled; + + if (!disable_gc(adapter)) + return false; + + before = ktime_get_ns(); + + if (!enable_gc_timeout(adapter)) + return false; + + /* for start time after timeout, the timeout can guarantee, that enable + * is blocked if too late + */ + time = ioread32(adapter->addr + ECM_SYSTEM_TIME_LOW); + time += TSNEP_GC_TIMEOUT; + iowrite32(time, adapter->addr + TSNEP_GC_TIME); + + ndelay(delay); + + enabled = enable_gc(adapter, a); + after = ktime_get_ns(); + + if (delay > TSNEP_GC_TIMEOUT) { + /* timeout must have blocked enable */ + if (enabled) + return false; + } else if ((after - before) < TSNEP_GC_TIMEOUT * 14 / 16) { + /* timeout must not have blocked enable */ + if (!enabled) + return false; + } + + if (enabled) { + if (gc_timeout_signaled(adapter)) + return false; + } else { + if (!gc_timeout_signaled(adapter)) + return false; + if (!ack_gc_timeout(adapter)) + return false; + } + + if (!disable_gc(adapter)) + return false; + + return true; +} + +static bool tsnep_test_gc_enable(struct tsnep_adapter *adapter) +{ + int i; + + iowrite32(0x80000001, adapter->addr + TSNEP_GCL_A + 0); + iowrite32(100000, adapter->addr + TSNEP_GCL_A + 4); + + for (i = 0; i < 200000; i += 100) { + if (!gc_delayed_enable(adapter, true, i)) + return false; + } + + iowrite32(0x80000001, adapter->addr + TSNEP_GCL_B + 0); + iowrite32(100000, adapter->addr + TSNEP_GCL_B + 4); + + for (i = 0; i < 200000; i += 100) { + if (!gc_delayed_enable(adapter, false, i)) + return false; + } + + return true; +} + +static void delay_base_time(struct tsnep_adapter *adapter, + struct tc_taprio_qopt_offload *qopt, s64 ms) +{ + u64 system_time; + u64 base_time = ktime_to_ns(qopt->base_time); + u64 n; + + tsnep_get_system_time(adapter, &system_time); + system_time += ms * 1000000; + n = div64_u64(system_time - base_time, qopt->cycle_time); + + qopt->base_time = ktime_add_ns(qopt->base_time, + (n + 1) * qopt->cycle_time); +} + +static void get_gate_state(struct tsnep_adapter *adapter, u32 *gc, u32 *gc_time, + u64 *system_time) +{ + u32 time_high_before; + u32 time_low; + u32 time_high; + u32 gc_time_before; + + time_high = ioread32(adapter->addr + ECM_SYSTEM_TIME_HIGH); + *gc_time = ioread32(adapter->addr + TSNEP_GC_TIME); + do { + time_low = ioread32(adapter->addr + ECM_SYSTEM_TIME_LOW); + *gc = ioread32(adapter->addr + TSNEP_GC); + + gc_time_before = *gc_time; + *gc_time = ioread32(adapter->addr + TSNEP_GC_TIME); + time_high_before = time_high; + time_high = ioread32(adapter->addr + ECM_SYSTEM_TIME_HIGH); + } while ((time_high != time_high_before) || + (*gc_time != gc_time_before)); + + *system_time = (((u64)time_high) << 32) | ((u64)time_low); +} + +static int get_operation(struct tsnep_gcl *gcl, u64 system_time, u64 *next) +{ + u64 n = div64_u64(system_time - gcl->base_time, gcl->cycle_time); + u64 cycle_start = gcl->base_time + gcl->cycle_time * n; + int i; + + *next = cycle_start; + for (i = 0; i < gcl->count; i++) { + *next += gcl->operation[i].interval; + if (*next > system_time) + break; + } + + return i; +} + +static bool check_gate(struct tsnep_adapter *adapter) +{ + u32 gc_time; + u32 gc; + u64 system_time; + struct tsnep_gcl *curr; + struct tsnep_gcl *prev; + u64 next_time; + u8 gate_open; + u8 next_gate_open; + + get_gate_state(adapter, &gc, &gc_time, &system_time); + + if (gc & TSNEP_GC_ACTIVE_A) { + curr = &adapter->gcl[0]; + prev = &adapter->gcl[1]; + } else if (gc & TSNEP_GC_ACTIVE_B) { + curr = &adapter->gcl[1]; + prev = &adapter->gcl[0]; + } else { + return false; + } + if (curr->start_time <= system_time) { + /* GCL is already active */ + int index; + + index = get_operation(curr, system_time, &next_time); + gate_open = curr->operation[index].properties & TSNEP_GCL_MASK; + if (index == curr->count - 1) + index = 0; + else + index++; + next_gate_open = + curr->operation[index].properties & TSNEP_GCL_MASK; + } else if (curr->change) { + /* operation of previous GCL is active */ + int index; + u64 start_before; + u64 n; + + index = get_operation(prev, system_time, &next_time); + next_time = curr->start_time; + start_before = prev->base_time; + n = div64_u64(curr->start_time - start_before, + prev->cycle_time); + start_before += n * prev->cycle_time; + if (curr->start_time == start_before) + start_before -= prev->cycle_time; + if (((start_before + prev->cycle_time_extension) >= + curr->start_time) && + (curr->start_time - prev->cycle_time_extension <= + system_time)) { + /* extend */ + index = prev->count - 1; + } + gate_open = prev->operation[index].properties & TSNEP_GCL_MASK; + next_gate_open = + curr->operation[0].properties & TSNEP_GCL_MASK; + } else { + /* GCL is waiting for start */ + next_time = curr->start_time; + gate_open = 0xFF; + next_gate_open = curr->operation[0].properties & TSNEP_GCL_MASK; + } + + if (gc_time != (next_time & 0xFFFFFFFF)) { + dev_err(&adapter->pdev->dev, "gate control time 0x%x!=0x%llx\n", + gc_time, next_time); + return false; + } + if (((gc & TSNEP_GC_OPEN) >> TSNEP_GC_OPEN_SHIFT) != gate_open) { + dev_err(&adapter->pdev->dev, + "gate control open 0x%02x!=0x%02x\n", + ((gc & TSNEP_GC_OPEN) >> TSNEP_GC_OPEN_SHIFT), + gate_open); + return false; + } + if (((gc & TSNEP_GC_NEXT_OPEN) >> TSNEP_GC_NEXT_OPEN_SHIFT) != + next_gate_open) { + dev_err(&adapter->pdev->dev, + "gate control next open 0x%02x!=0x%02x\n", + ((gc & TSNEP_GC_NEXT_OPEN) >> TSNEP_GC_NEXT_OPEN_SHIFT), + next_gate_open); + return false; + } + + return true; +} + +static bool check_gate_duration(struct tsnep_adapter *adapter, s64 ms) +{ + ktime_t start = ktime_get(); + + do { + if (!check_gate(adapter)) + return false; + } while (ktime_ms_delta(ktime_get(), start) < ms); + + return true; +} + +static bool enable_check_taprio(struct tsnep_adapter *adapter, + struct tc_taprio_qopt_offload *qopt, s64 ms) +{ + int retval; + + retval = tsnep_tc_setup(adapter->netdev, TC_SETUP_QDISC_TAPRIO, qopt); + if (retval) + return false; + + if (!check_gate_duration(adapter, ms)) + return false; + + return true; +} + +static bool disable_taprio(struct tsnep_adapter *adapter) +{ + struct tc_taprio_qopt_offload qopt; + int retval; + + memset(&qopt, 0, sizeof(qopt)); + qopt.enable = 0; + retval = tsnep_tc_setup(adapter->netdev, TC_SETUP_QDISC_TAPRIO, &qopt); + if (retval) + return false; + + return true; +} + +static bool run_taprio(struct tsnep_adapter *adapter, + struct tc_taprio_qopt_offload *qopt, s64 ms) +{ + if (!enable_check_taprio(adapter, qopt, ms)) + return false; + + if (!disable_taprio(adapter)) + return false; + + return true; +} + +static bool tsnep_test_taprio(struct tsnep_adapter *adapter) +{ + struct tc_taprio_qopt_offload *qopt; + int i; + + qopt = kzalloc(struct_size(qopt, entries, 255), GFP_KERNEL); + if (!qopt) + return false; + for (i = 0; i < 255; i++) + qopt->entries[i].command = TC_TAPRIO_CMD_SET_GATES; + + qopt->enable = 1; + qopt->base_time = ktime_set(0, 0); + qopt->cycle_time = 1500000; + qopt->cycle_time_extension = 0; + qopt->entries[0].gate_mask = 0x02; + qopt->entries[0].interval = 200000; + qopt->entries[1].gate_mask = 0x03; + qopt->entries[1].interval = 800000; + qopt->entries[2].gate_mask = 0x07; + qopt->entries[2].interval = 240000; + qopt->entries[3].gate_mask = 0x01; + qopt->entries[3].interval = 80000; + qopt->entries[4].gate_mask = 0x04; + qopt->entries[4].interval = 70000; + qopt->entries[5].gate_mask = 0x06; + qopt->entries[5].interval = 60000; + qopt->entries[6].gate_mask = 0x0F; + qopt->entries[6].interval = 50000; + qopt->num_entries = 7; + if (!run_taprio(adapter, qopt, 100)) + goto failed; + + qopt->enable = 1; + qopt->base_time = ktime_set(0, 0); + qopt->cycle_time = 411854; + qopt->cycle_time_extension = 0; + qopt->entries[0].gate_mask = 0x17; + qopt->entries[0].interval = 23842; + qopt->entries[1].gate_mask = 0x16; + qopt->entries[1].interval = 13482; + qopt->entries[2].gate_mask = 0x15; + qopt->entries[2].interval = 49428; + qopt->entries[3].gate_mask = 0x14; + qopt->entries[3].interval = 38189; + qopt->entries[4].gate_mask = 0x13; + qopt->entries[4].interval = 92321; + qopt->entries[5].gate_mask = 0x12; + qopt->entries[5].interval = 71239; + qopt->entries[6].gate_mask = 0x11; + qopt->entries[6].interval = 69932; + qopt->entries[7].gate_mask = 0x10; + qopt->entries[7].interval = 53421; + qopt->num_entries = 8; + if (!run_taprio(adapter, qopt, 100)) + goto failed; + + qopt->enable = 1; + qopt->base_time = ktime_set(0, 0); + delay_base_time(adapter, qopt, 12); + qopt->cycle_time = 125000; + qopt->cycle_time_extension = 0; + qopt->entries[0].gate_mask = 0x27; + qopt->entries[0].interval = 15000; + qopt->entries[1].gate_mask = 0x26; + qopt->entries[1].interval = 15000; + qopt->entries[2].gate_mask = 0x25; + qopt->entries[2].interval = 12500; + qopt->entries[3].gate_mask = 0x24; + qopt->entries[3].interval = 17500; + qopt->entries[4].gate_mask = 0x23; + qopt->entries[4].interval = 10000; + qopt->entries[5].gate_mask = 0x22; + qopt->entries[5].interval = 11000; + qopt->entries[6].gate_mask = 0x21; + qopt->entries[6].interval = 9000; + qopt->entries[7].gate_mask = 0x20; + qopt->entries[7].interval = 10000; + qopt->entries[8].gate_mask = 0x20; + qopt->entries[8].interval = 12500; + qopt->entries[9].gate_mask = 0x20; + qopt->entries[9].interval = 12500; + qopt->num_entries = 10; + if (!run_taprio(adapter, qopt, 100)) + goto failed; + + kfree(qopt); + + return true; + +failed: + disable_taprio(adapter); + kfree(qopt); + + return false; +} + +static bool tsnep_test_taprio_change(struct tsnep_adapter *adapter) +{ + struct tc_taprio_qopt_offload *qopt; + int i; + + qopt = kzalloc(struct_size(qopt, entries, 255), GFP_KERNEL); + if (!qopt) + return false; + for (i = 0; i < 255; i++) + qopt->entries[i].command = TC_TAPRIO_CMD_SET_GATES; + + qopt->enable = 1; + qopt->base_time = ktime_set(0, 0); + qopt->cycle_time = 100000; + qopt->cycle_time_extension = 0; + qopt->entries[0].gate_mask = 0x30; + qopt->entries[0].interval = 20000; + qopt->entries[1].gate_mask = 0x31; + qopt->entries[1].interval = 80000; + qopt->num_entries = 2; + if (!enable_check_taprio(adapter, qopt, 100)) + goto failed; + + /* change to identical */ + if (!enable_check_taprio(adapter, qopt, 100)) + goto failed; + delay_base_time(adapter, qopt, 17); + if (!enable_check_taprio(adapter, qopt, 100)) + goto failed; + + /* change to same cycle time */ + qopt->base_time = ktime_set(0, 0); + qopt->entries[0].gate_mask = 0x42; + qopt->entries[1].gate_mask = 0x43; + delay_base_time(adapter, qopt, 2); + if (!enable_check_taprio(adapter, qopt, 100)) + goto failed; + qopt->base_time = ktime_set(0, 0); + qopt->entries[0].gate_mask = 0x54; + qopt->entries[0].interval = 33333; + qopt->entries[1].gate_mask = 0x55; + qopt->entries[1].interval = 66667; + delay_base_time(adapter, qopt, 23); + if (!enable_check_taprio(adapter, qopt, 100)) + goto failed; + qopt->base_time = ktime_set(0, 0); + qopt->entries[0].gate_mask = 0x66; + qopt->entries[0].interval = 50000; + qopt->entries[1].gate_mask = 0x67; + qopt->entries[1].interval = 25000; + qopt->entries[2].gate_mask = 0x68; + qopt->entries[2].interval = 25000; + qopt->num_entries = 3; + delay_base_time(adapter, qopt, 11); + if (!enable_check_taprio(adapter, qopt, 100)) + goto failed; + + /* change to multiple of cycle time */ + qopt->base_time = ktime_set(0, 0); + qopt->cycle_time = 200000; + qopt->entries[0].gate_mask = 0x79; + qopt->entries[0].interval = 50000; + qopt->entries[1].gate_mask = 0x7A; + qopt->entries[1].interval = 150000; + qopt->num_entries = 2; + delay_base_time(adapter, qopt, 11); + if (!enable_check_taprio(adapter, qopt, 100)) + goto failed; + qopt->base_time = ktime_set(0, 0); + qopt->cycle_time = 1000000; + qopt->entries[0].gate_mask = 0x7B; + qopt->entries[0].interval = 125000; + qopt->entries[1].gate_mask = 0x7C; + qopt->entries[1].interval = 250000; + qopt->entries[2].gate_mask = 0x7D; + qopt->entries[2].interval = 375000; + qopt->entries[3].gate_mask = 0x7E; + qopt->entries[3].interval = 250000; + qopt->num_entries = 4; + delay_base_time(adapter, qopt, 3); + if (!enable_check_taprio(adapter, qopt, 100)) + goto failed; + + /* change to shorter cycle time */ + qopt->base_time = ktime_set(0, 0); + qopt->cycle_time = 333333; + qopt->entries[0].gate_mask = 0x8F; + qopt->entries[0].interval = 166666; + qopt->entries[1].gate_mask = 0x80; + qopt->entries[1].interval = 166667; + qopt->num_entries = 2; + delay_base_time(adapter, qopt, 11); + if (!enable_check_taprio(adapter, qopt, 100)) + goto failed; + qopt->base_time = ktime_set(0, 0); + qopt->cycle_time = 62500; + qopt->entries[0].gate_mask = 0x81; + qopt->entries[0].interval = 31250; + qopt->entries[1].gate_mask = 0x82; + qopt->entries[1].interval = 15625; + qopt->entries[2].gate_mask = 0x83; + qopt->entries[2].interval = 15625; + qopt->num_entries = 3; + delay_base_time(adapter, qopt, 1); + if (!enable_check_taprio(adapter, qopt, 100)) + goto failed; + + /* change to longer cycle time */ + qopt->base_time = ktime_set(0, 0); + qopt->cycle_time = 400000; + qopt->entries[0].gate_mask = 0x84; + qopt->entries[0].interval = 100000; + qopt->entries[1].gate_mask = 0x85; + qopt->entries[1].interval = 100000; + qopt->entries[2].gate_mask = 0x86; + qopt->entries[2].interval = 100000; + qopt->entries[3].gate_mask = 0x87; + qopt->entries[3].interval = 100000; + qopt->num_entries = 4; + delay_base_time(adapter, qopt, 7); + if (!enable_check_taprio(adapter, qopt, 100)) + goto failed; + qopt->base_time = ktime_set(0, 0); + qopt->cycle_time = 1700000; + qopt->entries[0].gate_mask = 0x88; + qopt->entries[0].interval = 200000; + qopt->entries[1].gate_mask = 0x89; + qopt->entries[1].interval = 300000; + qopt->entries[2].gate_mask = 0x8A; + qopt->entries[2].interval = 600000; + qopt->entries[3].gate_mask = 0x8B; + qopt->entries[3].interval = 100000; + qopt->entries[4].gate_mask = 0x8C; + qopt->entries[4].interval = 500000; + qopt->num_entries = 5; + delay_base_time(adapter, qopt, 6); + if (!enable_check_taprio(adapter, qopt, 100)) + goto failed; + + if (!disable_taprio(adapter)) + goto failed; + + kfree(qopt); + + return true; + +failed: + disable_taprio(adapter); + kfree(qopt); + + return false; +} + +static bool tsnep_test_taprio_extension(struct tsnep_adapter *adapter) +{ + struct tc_taprio_qopt_offload *qopt; + int i; + + qopt = kzalloc(struct_size(qopt, entries, 255), GFP_KERNEL); + if (!qopt) + return false; + for (i = 0; i < 255; i++) + qopt->entries[i].command = TC_TAPRIO_CMD_SET_GATES; + + qopt->enable = 1; + qopt->base_time = ktime_set(0, 0); + qopt->cycle_time = 100000; + qopt->cycle_time_extension = 50000; + qopt->entries[0].gate_mask = 0x90; + qopt->entries[0].interval = 20000; + qopt->entries[1].gate_mask = 0x91; + qopt->entries[1].interval = 80000; + qopt->num_entries = 2; + if (!enable_check_taprio(adapter, qopt, 100)) + goto failed; + + /* change to different phase */ + qopt->base_time = ktime_set(0, 50000); + qopt->entries[0].gate_mask = 0x92; + qopt->entries[0].interval = 33000; + qopt->entries[1].gate_mask = 0x93; + qopt->entries[1].interval = 67000; + qopt->num_entries = 2; + delay_base_time(adapter, qopt, 2); + if (!enable_check_taprio(adapter, qopt, 100)) + goto failed; + + /* change to different phase and longer cycle time */ + qopt->base_time = ktime_set(0, 0); + qopt->cycle_time = 1000000; + qopt->cycle_time_extension = 700000; + qopt->entries[0].gate_mask = 0x94; + qopt->entries[0].interval = 400000; + qopt->entries[1].gate_mask = 0x95; + qopt->entries[1].interval = 600000; + qopt->num_entries = 2; + delay_base_time(adapter, qopt, 7); + if (!enable_check_taprio(adapter, qopt, 100)) + goto failed; + qopt->base_time = ktime_set(0, 700000); + qopt->cycle_time = 2000000; + qopt->cycle_time_extension = 1900000; + qopt->entries[0].gate_mask = 0x96; + qopt->entries[0].interval = 400000; + qopt->entries[1].gate_mask = 0x97; + qopt->entries[1].interval = 1600000; + qopt->num_entries = 2; + delay_base_time(adapter, qopt, 9); + if (!enable_check_taprio(adapter, qopt, 100)) + goto failed; + + /* change to different phase and shorter cycle time */ + qopt->base_time = ktime_set(0, 0); + qopt->cycle_time = 1500000; + qopt->cycle_time_extension = 700000; + qopt->entries[0].gate_mask = 0x98; + qopt->entries[0].interval = 400000; + qopt->entries[1].gate_mask = 0x99; + qopt->entries[1].interval = 600000; + qopt->entries[2].gate_mask = 0x9A; + qopt->entries[2].interval = 500000; + qopt->num_entries = 3; + delay_base_time(adapter, qopt, 3); + if (!enable_check_taprio(adapter, qopt, 100)) + goto failed; + qopt->base_time = ktime_set(0, 100000); + qopt->cycle_time = 500000; + qopt->cycle_time_extension = 300000; + qopt->entries[0].gate_mask = 0x9B; + qopt->entries[0].interval = 150000; + qopt->entries[1].gate_mask = 0x9C; + qopt->entries[1].interval = 350000; + qopt->num_entries = 2; + delay_base_time(adapter, qopt, 9); + if (!enable_check_taprio(adapter, qopt, 100)) + goto failed; + + /* change to different cycle time */ + qopt->base_time = ktime_set(0, 0); + qopt->cycle_time = 1000000; + qopt->cycle_time_extension = 700000; + qopt->entries[0].gate_mask = 0xAD; + qopt->entries[0].interval = 400000; + qopt->entries[1].gate_mask = 0xAE; + qopt->entries[1].interval = 300000; + qopt->entries[2].gate_mask = 0xAF; + qopt->entries[2].interval = 300000; + qopt->num_entries = 3; + if (!enable_check_taprio(adapter, qopt, 100)) + goto failed; + qopt->base_time = ktime_set(0, 0); + qopt->cycle_time = 400000; + qopt->cycle_time_extension = 100000; + qopt->entries[0].gate_mask = 0xA0; + qopt->entries[0].interval = 200000; + qopt->entries[1].gate_mask = 0xA1; + qopt->entries[1].interval = 200000; + qopt->num_entries = 2; + delay_base_time(adapter, qopt, 19); + if (!enable_check_taprio(adapter, qopt, 100)) + goto failed; + qopt->base_time = ktime_set(0, 0); + qopt->cycle_time = 500000; + qopt->cycle_time_extension = 499999; + qopt->entries[0].gate_mask = 0xB2; + qopt->entries[0].interval = 100000; + qopt->entries[1].gate_mask = 0xB3; + qopt->entries[1].interval = 100000; + qopt->entries[2].gate_mask = 0xB4; + qopt->entries[2].interval = 100000; + qopt->entries[3].gate_mask = 0xB5; + qopt->entries[3].interval = 200000; + qopt->num_entries = 4; + delay_base_time(adapter, qopt, 19); + if (!enable_check_taprio(adapter, qopt, 100)) + goto failed; + qopt->base_time = ktime_set(0, 0); + qopt->cycle_time = 6000000; + qopt->cycle_time_extension = 5999999; + qopt->entries[0].gate_mask = 0xC6; + qopt->entries[0].interval = 1000000; + qopt->entries[1].gate_mask = 0xC7; + qopt->entries[1].interval = 1000000; + qopt->entries[2].gate_mask = 0xC8; + qopt->entries[2].interval = 1000000; + qopt->entries[3].gate_mask = 0xC9; + qopt->entries[3].interval = 1500000; + qopt->entries[4].gate_mask = 0xCA; + qopt->entries[4].interval = 1500000; + qopt->num_entries = 5; + delay_base_time(adapter, qopt, 1); + if (!enable_check_taprio(adapter, qopt, 100)) + goto failed; + + if (!disable_taprio(adapter)) + goto failed; + + kfree(qopt); + + return true; + +failed: + disable_taprio(adapter); + kfree(qopt); + + return false; +} + +int tsnep_ethtool_get_test_count(void) +{ + return TSNEP_TEST_COUNT; +} + +void tsnep_ethtool_get_test_strings(u8 *data) +{ + memcpy(data, tsnep_test_strings, sizeof(tsnep_test_strings)); +} + +void tsnep_ethtool_self_test(struct net_device *netdev, + struct ethtool_test *eth_test, u64 *data) +{ + struct tsnep_adapter *adapter = netdev_priv(netdev); + + eth_test->len = TSNEP_TEST_COUNT; + + if (eth_test->flags != ETH_TEST_FL_OFFLINE) { + /* no tests are done online */ + data[TSNEP_TEST_ENABLE] = 0; + data[TSNEP_TEST_TAPRIO] = 0; + data[TSNEP_TEST_TAPRIO_CHANGE] = 0; + data[TSNEP_TEST_TAPRIO_EXTENSION] = 0; + + return; + } + + if (tsnep_test_gc_enable(adapter)) { + data[TSNEP_TEST_ENABLE] = 0; + } else { + eth_test->flags |= ETH_TEST_FL_FAILED; + data[TSNEP_TEST_ENABLE] = 1; + } + + if (tsnep_test_taprio(adapter)) { + data[TSNEP_TEST_TAPRIO] = 0; + } else { + eth_test->flags |= ETH_TEST_FL_FAILED; + data[TSNEP_TEST_TAPRIO] = 1; + } + + if (tsnep_test_taprio_change(adapter)) { + data[TSNEP_TEST_TAPRIO_CHANGE] = 0; + } else { + eth_test->flags |= ETH_TEST_FL_FAILED; + data[TSNEP_TEST_TAPRIO_CHANGE] = 1; + } + + if (tsnep_test_taprio_extension(adapter)) { + data[TSNEP_TEST_TAPRIO_EXTENSION] = 0; + } else { + eth_test->flags |= ETH_TEST_FL_FAILED; + data[TSNEP_TEST_TAPRIO_EXTENSION] = 1; + } +} -- 2.20.1 ^ permalink raw reply related [flat|nested] 16+ messages in thread
* Re: [PATCH net-next v2 3/3] tsnep: Add TSN endpoint Ethernet MAC driver 2021-08-31 19:34 ` [PATCH net-next v2 3/3] tsnep: Add TSN endpoint Ethernet MAC driver Gerhard Engleder @ 2021-08-31 21:55 ` Andrew Lunn 2021-09-01 20:18 ` Gerhard Engleder 2021-08-31 23:12 ` kernel test robot 2021-09-02 23:17 ` Vinicius Costa Gomes 2 siblings, 1 reply; 16+ messages in thread From: Andrew Lunn @ 2021-08-31 21:55 UTC (permalink / raw) To: Gerhard Engleder; +Cc: davem, kuba, robh+dt, michal.simek, netdev, devicetree > +static int tsnep_ethtool_set_priv_flags(struct net_device *netdev, > + u32 priv_flags) > +{ > + struct tsnep_adapter *adapter = netdev_priv(netdev); > + int retval; > + > + if (priv_flags & ~TSNEP_PRIV_FLAGS) > + return -EINVAL; > + > + if ((priv_flags & TSNEP_PRIV_FLAGS_LOOPBACK_100) && > + (priv_flags & TSNEP_PRIV_FLAGS_LOOPBACK_1000)) > + return -EINVAL; > + > + if ((priv_flags & TSNEP_PRIV_FLAGS_LOOPBACK_100) && > + adapter->loopback != SPEED_100) { > + if (adapter->loopback != SPEED_UNKNOWN) > + retval = phy_loopback(adapter->phydev, false); > + else > + retval = 0; > + > + if (!retval) { > + adapter->phydev->speed = SPEED_100; > + adapter->phydev->duplex = DUPLEX_FULL; > + retval = phy_loopback(adapter->phydev, true); This is a pretty unusual use of private flags, changing loopback at runtime. ethtool --test generally does that. What is your use case which requires loopback in normal operation, not during testing? > +static irqreturn_t tsnep_irq(int irq, void *arg) > +{ > + struct tsnep_adapter *adapter = arg; > + u32 active = ioread32(adapter->addr + ECM_INT_ACTIVE); > + > + /* acknowledge interrupt */ > + if (active != 0) > + iowrite32(active, adapter->addr + ECM_INT_ACKNOWLEDGE); > + > + /* handle management data interrupt */ > + if ((active & ECM_INT_MD) != 0) { > + adapter->md_active = false; > + wake_up_interruptible(&adapter->md_wait); > + } > + > + /* handle link interrupt */ > + if ((active & ECM_INT_LINK) != 0) { > + if (adapter->netdev->phydev) { > + struct phy_device *phydev = adapter->netdev->phydev; > + u32 status = ioread32(adapter->addr + ECM_STATUS); > + int link = (status & ECM_NO_LINK) ? 0 : 1; > + u32 speed = status & ECM_SPEED_MASK; How does PHY link and speed get into this MAC register? Is the MAC polling the PHY over the MDIO bus? Is the PHY internal to the MAC and it has backdoor access to the PHY status? > +static int tsnep_mdiobus_read(struct mii_bus *bus, int addr, int regnum) > +{ > + struct tsnep_adapter *adapter = bus->priv; > + u32 md; > + int retval; > + > + if (regnum & MII_ADDR_C45) > + return -EOPNOTSUPP; > + > + /* management data frame without preamble */ > + md = ECM_MD_READ; I know some PHYs are happy to work without a preamble. But as far as i know, 802.3 c22 does not say it is optional. So this needs to be an opt-in feature, for when you know all the devices on the bus support it. We have a standard DT property for this. See mdio.yaml, suppress-preamble. Please look for this in the DT blob, and only suppress the pre-amble if it is present. > + md |= (regnum << ECM_MD_ADDR_SHIFT) & ECM_MD_ADDR_MASK; > + md |= ECM_MD_PHY_ADDR_FLAG; > + md |= (addr << ECM_MD_PHY_ADDR_SHIFT) & ECM_MD_PHY_ADDR_MASK; > + adapter->md_active = true; > + iowrite32(md, adapter->addr + ECM_MD_CONTROL); > + retval = wait_event_interruptible(adapter->md_wait, > + !adapter->md_active); It is pretty normal to have some sort of timeout here. So maybe use wait_event_interruptible_timeout()? > +static void tsnep_phy_link_status_change(struct net_device *netdev) > +{ > + phy_print_status(netdev->phydev); > +} There is normally something here, like telling the MAC what speed it should run at. > +static int tsnep_phy_open(struct tsnep_adapter *adapter) > +{ > + struct phy_device *phydev; > + struct ethtool_eee ethtool_eee; > + int retval; > + > + retval = phy_connect_direct(adapter->netdev, adapter->phydev, > + tsnep_phy_link_status_change, > + adapter->phy_mode); > + if (retval) > + return retval; > + phydev = adapter->netdev->phydev; > + > + /* MAC supports only 100Mbps|1000Mbps full duplex > + * SPE (Single Pair Ethernet) is also an option but not implemented yet > + */ > + phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_10baseT_Half_BIT); > + phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_10baseT_Full_BIT); > + phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_100baseT_Half_BIT); > + phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_1000baseT_Half_BIT); > + > + /* disable EEE autoneg, EEE not supported by TSNEP */ > + memset(ðtool_eee, 0, sizeof(ethtool_eee)); > + phy_ethtool_set_eee(adapter->phydev, ðtool_eee); > + > + adapter->phydev->irq = PHY_MAC_INTERRUPT; > + phy_start(adapter->phydev); > + phy_start_aneg(adapter->phydev); No need to call phy_start_aneg(). > +static int tsnep_phy_init(struct tsnep_adapter *adapter) > +{ > + struct device_node *dn; > + int retval; > + > + retval = of_get_phy_mode(adapter->pdev->dev.of_node, > + &adapter->phy_mode); > + if (retval) > + adapter->phy_mode = PHY_INTERFACE_MODE_GMII; > + > + dn = of_parse_phandle(adapter->pdev->dev.of_node, "phy-handle", 0); > + adapter->phydev = of_phy_find_device(dn); > + of_node_put(dn); > + if (!adapter->phydev && adapter->mdiobus) > + adapter->phydev = phy_find_first(adapter->mdiobus); Do you actually need phy_find_first()? It is better to have it in DT. > + if (!adapter->phydev) > + return -EIO; > + > + return 0; > +} > + > +static int tsnep_probe(struct platform_device *pdev) > +{ ... > + dev_info(&adapter->pdev->dev, "device version %d.%02d\n", version, > + revision); > + if (adapter->gate_control) > + dev_info(&adapter->pdev->dev, "gate control detected\n"); > + > + return 0; > + > + unregister_netdev(adapter->netdev); How do you get here? Is gcc is warning about unreachable code? > +register_failed: > + tsnep_tc_cleanup(adapter); > +tc_init_failed: > + tsnep_ptp_cleanup(adapter); > +ptp_init_failed: > +phy_init_failed: > + if (adapter->mdiobus) > + mdiobus_unregister(adapter->mdiobus); > +mdio_init_failed: > +mac_init_failed: > + return retval; > +} Andrew ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH net-next v2 3/3] tsnep: Add TSN endpoint Ethernet MAC driver 2021-08-31 21:55 ` Andrew Lunn @ 2021-09-01 20:18 ` Gerhard Engleder 2021-09-01 21:01 ` Andrew Lunn 0 siblings, 1 reply; 16+ messages in thread From: Gerhard Engleder @ 2021-09-01 20:18 UTC (permalink / raw) To: Andrew Lunn; +Cc: David Miller, Jakub Kicinski, netdev, devicetree > > +static int tsnep_ethtool_set_priv_flags(struct net_device *netdev, > > + u32 priv_flags) > > +{ > > + struct tsnep_adapter *adapter = netdev_priv(netdev); > > + int retval; > > + > > + if (priv_flags & ~TSNEP_PRIV_FLAGS) > > + return -EINVAL; > > + > > + if ((priv_flags & TSNEP_PRIV_FLAGS_LOOPBACK_100) && > > + (priv_flags & TSNEP_PRIV_FLAGS_LOOPBACK_1000)) > > + return -EINVAL; > > + > > + if ((priv_flags & TSNEP_PRIV_FLAGS_LOOPBACK_100) && > > + adapter->loopback != SPEED_100) { > > + if (adapter->loopback != SPEED_UNKNOWN) > > + retval = phy_loopback(adapter->phydev, false); > > + else > > + retval = 0; > > + > > + if (!retval) { > > + adapter->phydev->speed = SPEED_100; > > + adapter->phydev->duplex = DUPLEX_FULL; > > + retval = phy_loopback(adapter->phydev, true); > > This is a pretty unusual use of private flags, changing loopback at > runtime. ethtool --test generally does that. > > What is your use case which requires loopback in normal operation, not > during testing? Yes it is unusual. I was searching for some user space interface for loopback and found drivers/net/ethernet/aquantia/atlantic/aq_ethtool.c which uses private flags. Use case is still testing and not normal operation. Testing is done mostly with a user space application, because I don't want to overload the driver with test code and test frameworks can be used in user space. With loopback it is possible to execute a lot of tests like stressing the MAC with various frame lengths and checking TX/RX time stamps. These tests are useful for every integration of this IP core into an FPGA and not only for IP core development. > > +static irqreturn_t tsnep_irq(int irq, void *arg) > > +{ > > + struct tsnep_adapter *adapter = arg; > > + u32 active = ioread32(adapter->addr + ECM_INT_ACTIVE); > > + > > + /* acknowledge interrupt */ > > + if (active != 0) > > + iowrite32(active, adapter->addr + ECM_INT_ACKNOWLEDGE); > > + > > + /* handle management data interrupt */ > > + if ((active & ECM_INT_MD) != 0) { > > + adapter->md_active = false; > > + wake_up_interruptible(&adapter->md_wait); > > + } > > + > > + /* handle link interrupt */ > > + if ((active & ECM_INT_LINK) != 0) { > > + if (adapter->netdev->phydev) { > > + struct phy_device *phydev = adapter->netdev->phydev; > > + u32 status = ioread32(adapter->addr + ECM_STATUS); > > + int link = (status & ECM_NO_LINK) ? 0 : 1; > > + u32 speed = status & ECM_SPEED_MASK; > > How does PHY link and speed get into this MAC register? Is the MAC > polling the PHY over the MDIO bus? Is the PHY internal to the MAC and > it has backdoor access to the PHY status? PHY is external. The MAC expects additional signals for link status. These signals can be derived from RGMII in band signaling of the link status or by using PHY link and speed LED outputs. The MAC is using the link status for a quick no link reaction to minimize the impact to real time applications. EtherCAT for example also uses the link LED output for a no link reaction within a few microseconds. > > +static int tsnep_mdiobus_read(struct mii_bus *bus, int addr, int regnum) > > +{ > > + struct tsnep_adapter *adapter = bus->priv; > > + u32 md; > > + int retval; > > + > > + if (regnum & MII_ADDR_C45) > > + return -EOPNOTSUPP; > > + > > + /* management data frame without preamble */ > > + md = ECM_MD_READ; > > I know some PHYs are happy to work without a preamble. But as far as i > know, 802.3 c22 does not say it is optional. So this needs to be an > opt-in feature, for when you know all the devices on the bus support > it. We have a standard DT property for this. See mdio.yaml, > suppress-preamble. Please look for this in the DT blob, and only > suppress the pre-amble if it is present. You are right, I will improve that. > > + md |= (regnum << ECM_MD_ADDR_SHIFT) & ECM_MD_ADDR_MASK; > > + md |= ECM_MD_PHY_ADDR_FLAG; > > + md |= (addr << ECM_MD_PHY_ADDR_SHIFT) & ECM_MD_PHY_ADDR_MASK; > > + adapter->md_active = true; > > + iowrite32(md, adapter->addr + ECM_MD_CONTROL); > > + retval = wait_event_interruptible(adapter->md_wait, > > + !adapter->md_active); > > It is pretty normal to have some sort of timeout here. So maybe use > wait_event_interruptible_timeout()? So far I could trust my hardware to generate the interrupt. But it makes sense to not trust the hardware absolutely. I will add a timeout. > > +static void tsnep_phy_link_status_change(struct net_device *netdev) > > +{ > > + phy_print_status(netdev->phydev); > > +} > > There is normally something here, like telling the MAC what speed it > should run at. As explained above, the MAC knows the link speed due to additional signals from the PHY. So there is no need to tell the MAC the link speed. > > + adapter->phydev->irq = PHY_MAC_INTERRUPT; > > + phy_start(adapter->phydev); > > + phy_start_aneg(adapter->phydev); > > No need to call phy_start_aneg(). Copied blindly from some other driver. I will fix that. (drivers/net/ethernet/microchip/lan743x_main.c) > > +static int tsnep_phy_init(struct tsnep_adapter *adapter) > > +{ > > + struct device_node *dn; > > + int retval; > > + > > + retval = of_get_phy_mode(adapter->pdev->dev.of_node, > > + &adapter->phy_mode); > > + if (retval) > > + adapter->phy_mode = PHY_INTERFACE_MODE_GMII; > > + > > + dn = of_parse_phandle(adapter->pdev->dev.of_node, "phy-handle", 0); > > + adapter->phydev = of_phy_find_device(dn); > > + of_node_put(dn); > > + if (!adapter->phydev && adapter->mdiobus) > > + adapter->phydev = phy_find_first(adapter->mdiobus); > > Do you actually need phy_find_first()? It is better to have it in DT. I thought it is a reasonable fallback, because then PHY can be ommited in DT (lazy developer, unknown PHY address during development, ...). Driver and IP core will be used also on x86 over PCIe without DT. In this case this fallback also makes sense. But I must confess, the driver is not ready for x86 use case yet. > > + return 0; > > + > > + unregister_netdev(adapter->netdev); > > How do you get here? Is gcc is warning about unreachable code? Left over for easy addition of goto labels. I will remove that. Gerhard ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH net-next v2 3/3] tsnep: Add TSN endpoint Ethernet MAC driver 2021-09-01 20:18 ` Gerhard Engleder @ 2021-09-01 21:01 ` Andrew Lunn 2021-09-02 20:32 ` Gerhard Engleder 2021-09-24 19:35 ` Gerhard Engleder 0 siblings, 2 replies; 16+ messages in thread From: Andrew Lunn @ 2021-09-01 21:01 UTC (permalink / raw) To: Gerhard Engleder; +Cc: David Miller, Jakub Kicinski, netdev, devicetree On Wed, Sep 01, 2021 at 10:18:45PM +0200, Gerhard Engleder wrote: > > > +static int tsnep_ethtool_set_priv_flags(struct net_device *netdev, > > > + u32 priv_flags) > > > +{ > > > + struct tsnep_adapter *adapter = netdev_priv(netdev); > > > + int retval; > > > + > > > + if (priv_flags & ~TSNEP_PRIV_FLAGS) > > > + return -EINVAL; > > > + > > > + if ((priv_flags & TSNEP_PRIV_FLAGS_LOOPBACK_100) && > > > + (priv_flags & TSNEP_PRIV_FLAGS_LOOPBACK_1000)) > > > + return -EINVAL; > > > + > > > + if ((priv_flags & TSNEP_PRIV_FLAGS_LOOPBACK_100) && > > > + adapter->loopback != SPEED_100) { > > > + if (adapter->loopback != SPEED_UNKNOWN) > > > + retval = phy_loopback(adapter->phydev, false); > > > + else > > > + retval = 0; > > > + > > > + if (!retval) { > > > + adapter->phydev->speed = SPEED_100; > > > + adapter->phydev->duplex = DUPLEX_FULL; > > > + retval = phy_loopback(adapter->phydev, true); > > > > This is a pretty unusual use of private flags, changing loopback at > > runtime. ethtool --test generally does that. > > > > What is your use case which requires loopback in normal operation, not > > during testing? > > Yes it is unusual. I was searching for some user space interface for loopback > and found drivers/net/ethernet/aquantia/atlantic/aq_ethtool.c which uses > private flags. Ah, that passed my by. I would of probably said something about it. > Use case is still testing and not normal operation. Testing is done mostly with > a user space application, because I don't want to overload the driver with test > code and test frameworks can be used in user space. With loopback it is > possible to execute a lot of tests like stressing the MAC with various frame > lengths and checking TX/RX time stamps. These tests are useful for every > integration of this IP core into an FPGA and not only for IP core development. I did a quick search. CAN has something interesting: https://wiki.rdu.im/_pages/Application-Notes/Software/can-bus-in-linux.html $ sudo ip link set can0 down $ sudo ip link set can0 type can loopback on $ sudo ip link set can0 up type can bitrate 1000000 Also https://www.kernel.org/doc/Documentation/networking/can.txt The semantics are maybe slightly different. It appears to loopback can messages, but also send out the wire. I think many can transcievers can do this in hardware, but this seems to be a software feature for when the hardware cannot do it? I have seen Ethernet PHYs which do send out the wire when in loopback, so it does seem like a reasonable model. Also i like that you need to down the interface before you can put it into loopback. Saves a lot of surprises. Maybe you can look at this, see if it can be made generic, and could be used here? > > > +static irqreturn_t tsnep_irq(int irq, void *arg) > > > +{ > > > + struct tsnep_adapter *adapter = arg; > > > + u32 active = ioread32(adapter->addr + ECM_INT_ACTIVE); > > > + > > > + /* acknowledge interrupt */ > > > + if (active != 0) > > > + iowrite32(active, adapter->addr + ECM_INT_ACKNOWLEDGE); > > > + > > > + /* handle management data interrupt */ > > > + if ((active & ECM_INT_MD) != 0) { > > > + adapter->md_active = false; > > > + wake_up_interruptible(&adapter->md_wait); > > > + } > > > + > > > + /* handle link interrupt */ > > > + if ((active & ECM_INT_LINK) != 0) { > > > + if (adapter->netdev->phydev) { > > > + struct phy_device *phydev = adapter->netdev->phydev; > > > + u32 status = ioread32(adapter->addr + ECM_STATUS); > > > + int link = (status & ECM_NO_LINK) ? 0 : 1; > > > + u32 speed = status & ECM_SPEED_MASK; > > > > How does PHY link and speed get into this MAC register? Is the MAC > > polling the PHY over the MDIO bus? Is the PHY internal to the MAC and > > it has backdoor access to the PHY status? > > PHY is external. The MAC expects additional signals for link status. These > signals can be derived from RGMII in band signaling of the link status or by > using PHY link and speed LED outputs. The MAC is using the link status for > a quick no link reaction to minimize the impact to real time applications. > EtherCAT for example also uses the link LED output for a no link reaction > within a few microseconds. O.K. This is not the normal Linux way. You normally have the PHY driver tell the PHY core, which then tells the MAC driver. That always works. RGMII in band signaling is not supported by all PHY devices, and the board design would require the LED output are correctly connected, and i guess you need a hacked PHY driver to use the correct LED meanings? Plus i guess you have additional changes in the PHY driver to do fast link down detection? I think this needs another DT property to enable using such short cuts, and you should use the Linux way by default. Also, don't you need a property which tells you to either use RGMII inband, or LED signals? > > > +static int tsnep_mdiobus_read(struct mii_bus *bus, int addr, int regnum) > > > +{ > > > + struct tsnep_adapter *adapter = bus->priv; > > > + u32 md; > > > + int retval; > > > + > > > + if (regnum & MII_ADDR_C45) > > > + return -EOPNOTSUPP; > > > + > > > + /* management data frame without preamble */ > > > + md = ECM_MD_READ; > > > > I know some PHYs are happy to work without a preamble. But as far as i > > know, 802.3 c22 does not say it is optional. So this needs to be an > > opt-in feature, for when you know all the devices on the bus support > > it. We have a standard DT property for this. See mdio.yaml, > > suppress-preamble. Please look for this in the DT blob, and only > > suppress the pre-amble if it is present. > > You are right, I will improve that. You might also be interested in clock-frequency, if you can control the bus frequency. I've run Marvell PHYs at i think 8Mhz, rather than the usual 2.5MHz. > > > +static int tsnep_phy_init(struct tsnep_adapter *adapter) > > > +{ > > > + struct device_node *dn; > > > + int retval; > > > + > > > + retval = of_get_phy_mode(adapter->pdev->dev.of_node, > > > + &adapter->phy_mode); > > > + if (retval) > > > + adapter->phy_mode = PHY_INTERFACE_MODE_GMII; > > > + > > > + dn = of_parse_phandle(adapter->pdev->dev.of_node, "phy-handle", 0); > > > + adapter->phydev = of_phy_find_device(dn); > > > + of_node_put(dn); > > > + if (!adapter->phydev && adapter->mdiobus) > > > + adapter->phydev = phy_find_first(adapter->mdiobus); > > > > Do you actually need phy_find_first()? It is better to have it in DT. > > I thought it is a reasonable fallback, because then PHY can be ommited in > DT (lazy developer, unknown PHY address during development, ...). It is a reasonable fallback, until it goes wrong, because you have two PHYs on the bus etc. > Driver > and IP core will be used also on x86 over PCIe without DT. In this case this > fallback also makes sense. But I must confess, the driver is not ready for > x86 use case yet. We recently added ACPI properties. See Documentation/firmware-guide/acpi/dsd/phy.rst. Also, watch out. It might not be ready, but it will get compiled for x86, mips, powerpc etc, by the build bots, if you don't prevent it. So it needs to at least be warning free. Andrew ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH net-next v2 3/3] tsnep: Add TSN endpoint Ethernet MAC driver 2021-09-01 21:01 ` Andrew Lunn @ 2021-09-02 20:32 ` Gerhard Engleder 2021-09-02 21:21 ` Andrew Lunn 2021-09-24 19:35 ` Gerhard Engleder 1 sibling, 1 reply; 16+ messages in thread From: Gerhard Engleder @ 2021-09-02 20:32 UTC (permalink / raw) To: Andrew Lunn; +Cc: David Miller, Jakub Kicinski, netdev, devicetree > > > > +static int tsnep_ethtool_set_priv_flags(struct net_device *netdev, > > > > + u32 priv_flags) > > > > +{ > > > > + struct tsnep_adapter *adapter = netdev_priv(netdev); > > > > + int retval; > > > > + > > > > + if (priv_flags & ~TSNEP_PRIV_FLAGS) > > > > + return -EINVAL; > > > > + > > > > + if ((priv_flags & TSNEP_PRIV_FLAGS_LOOPBACK_100) && > > > > + (priv_flags & TSNEP_PRIV_FLAGS_LOOPBACK_1000)) > > > > + return -EINVAL; > > > > + > > > > + if ((priv_flags & TSNEP_PRIV_FLAGS_LOOPBACK_100) && > > > > + adapter->loopback != SPEED_100) { > > > > + if (adapter->loopback != SPEED_UNKNOWN) > > > > + retval = phy_loopback(adapter->phydev, false); > > > > + else > > > > + retval = 0; > > > > + > > > > + if (!retval) { > > > > + adapter->phydev->speed = SPEED_100; > > > > + adapter->phydev->duplex = DUPLEX_FULL; > > > > + retval = phy_loopback(adapter->phydev, true); > > > > > > This is a pretty unusual use of private flags, changing loopback at > > > runtime. ethtool --test generally does that. > > > > > > What is your use case which requires loopback in normal operation, not > > > during testing? > > > > Yes it is unusual. I was searching for some user space interface for loopback > > and found drivers/net/ethernet/aquantia/atlantic/aq_ethtool.c which uses > > private flags. > > Ah, that passed my by. I would of probably said something about it. > > > Use case is still testing and not normal operation. Testing is done mostly with > > a user space application, because I don't want to overload the driver with test > > code and test frameworks can be used in user space. With loopback it is > > possible to execute a lot of tests like stressing the MAC with various frame > > lengths and checking TX/RX time stamps. These tests are useful for every > > integration of this IP core into an FPGA and not only for IP core development. > > I did a quick search. CAN has something interesting: > > https://wiki.rdu.im/_pages/Application-Notes/Software/can-bus-in-linux.html > $ sudo ip link set can0 down > $ sudo ip link set can0 type can loopback on > $ sudo ip link set can0 up type can bitrate 1000000 > > Also > > https://www.kernel.org/doc/Documentation/networking/can.txt > > The semantics are maybe slightly different. It appears to loopback can > messages, but also send out the wire. I think many can transcievers > can do this in hardware, but this seems to be a software feature for > when the hardware cannot do it? I have seen Ethernet PHYs which do > send out the wire when in loopback, so it does seem like a reasonable > model. Also i like that you need to down the interface before you can > put it into loopback. Saves a lot of surprises. > > Maybe you can look at this, see if it can be made generic, and could > be used here? In contrast to CAN, Ethernet loopback is only useful for testing. Even if some Ethernet PHYs send out the wire when in loopback, reception from the wire is not possible because it will conflict with the looped back frame (Ethernet is full duplex capable, CAN not). Ethernet link behavior is configured with ethtool, so I was searching for some ethtool interface. I will take a look at CAN loopback support. > > > > +static irqreturn_t tsnep_irq(int irq, void *arg) > > > > +{ > > > > + struct tsnep_adapter *adapter = arg; > > > > + u32 active = ioread32(adapter->addr + ECM_INT_ACTIVE); > > > > + > > > > + /* acknowledge interrupt */ > > > > + if (active != 0) > > > > + iowrite32(active, adapter->addr + ECM_INT_ACKNOWLEDGE); > > > > + > > > > + /* handle management data interrupt */ > > > > + if ((active & ECM_INT_MD) != 0) { > > > > + adapter->md_active = false; > > > > + wake_up_interruptible(&adapter->md_wait); > > > > + } > > > > + > > > > + /* handle link interrupt */ > > > > + if ((active & ECM_INT_LINK) != 0) { > > > > + if (adapter->netdev->phydev) { > > > > + struct phy_device *phydev = adapter->netdev->phydev; > > > > + u32 status = ioread32(adapter->addr + ECM_STATUS); > > > > + int link = (status & ECM_NO_LINK) ? 0 : 1; > > > > + u32 speed = status & ECM_SPEED_MASK; > > > > > > How does PHY link and speed get into this MAC register? Is the MAC > > > polling the PHY over the MDIO bus? Is the PHY internal to the MAC and > > > it has backdoor access to the PHY status? > > > > PHY is external. The MAC expects additional signals for link status. These > > signals can be derived from RGMII in band signaling of the link status or by > > using PHY link and speed LED outputs. The MAC is using the link status for > > a quick no link reaction to minimize the impact to real time applications. > > EtherCAT for example also uses the link LED output for a no link reaction > > within a few microseconds. > > O.K. This is not the normal Linux way. You normally have the PHY > driver tell the PHY core, which then tells the MAC driver. That always > works. RGMII in band signaling is not supported by all PHY devices, > and the board design would require the LED output are correctly > connected, and i guess you need a hacked PHY driver to use the correct > LED meanings? Plus i guess you have additional changes in the PHY > driver to do fast link down detection? Yes, LED outputs must be correctly connected in the board design. LED outputs are usually configured with strapping pins, which again require a correct board design. Fast link down detection is a hardware property of the selected PHY. So far no PHY driver changes were necessary. > I think this needs another DT property to enable using such short > cuts, and you should use the Linux way by default. Isn't choosing PHY_MAC_INTERRUPT also the Linux way? I preferred it over PHY_POLL, because I need the link information directly in the MAC anyway. But maybe the speed information is too much and should be provided to the MAC. > Also, don't you need a property which tells you to either use RGMII > inband, or LED signals? No, this decision is done in VHDL/FPGA. No need to consume precious FPGA resources for runtime configuration. > > > > +static int tsnep_mdiobus_read(struct mii_bus *bus, int addr, int regnum) > > > > +{ > > > > + struct tsnep_adapter *adapter = bus->priv; > > > > + u32 md; > > > > + int retval; > > > > + > > > > + if (regnum & MII_ADDR_C45) > > > > + return -EOPNOTSUPP; > > > > + > > > > + /* management data frame without preamble */ > > > > + md = ECM_MD_READ; > > > > > > I know some PHYs are happy to work without a preamble. But as far as i > > > know, 802.3 c22 does not say it is optional. So this needs to be an > > > opt-in feature, for when you know all the devices on the bus support > > > it. We have a standard DT property for this. See mdio.yaml, > > > suppress-preamble. Please look for this in the DT blob, and only > > > suppress the pre-amble if it is present. > > > > You are right, I will improve that. > > You might also be interested in clock-frequency, if you can control > the bus frequency. I've run Marvell PHYs at i think 8Mhz, rather than > the usual 2.5MHz. Thank you for the information. Currently the frequency cannot be controlled and is fixed at 2.5MHz. > > > > +static int tsnep_phy_init(struct tsnep_adapter *adapter) > > > > +{ > > > > + struct device_node *dn; > > > > + int retval; > > > > + > > > > + retval = of_get_phy_mode(adapter->pdev->dev.of_node, > > > > + &adapter->phy_mode); > > > > + if (retval) > > > > + adapter->phy_mode = PHY_INTERFACE_MODE_GMII; > > > > + > > > > + dn = of_parse_phandle(adapter->pdev->dev.of_node, "phy-handle", 0); > > > > + adapter->phydev = of_phy_find_device(dn); > > > > + of_node_put(dn); > > > > + if (!adapter->phydev && adapter->mdiobus) > > > > + adapter->phydev = phy_find_first(adapter->mdiobus); > > > > > > Do you actually need phy_find_first()? It is better to have it in DT. > > > > I thought it is a reasonable fallback, because then PHY can be ommited in > > DT (lazy developer, unknown PHY address during development, ...). > > It is a reasonable fallback, until it goes wrong, because you have two > PHYs on the bus etc. > > > Driver > > and IP core will be used also on x86 over PCIe without DT. In this case this > > fallback also makes sense. But I must confess, the driver is not ready for > > x86 use case yet. > > We recently added ACPI properties. See > Documentation/firmware-guide/acpi/dsd/phy.rst. I'm afraid that relying on ACPI is not always an option. x86 CPU modules are very often used in industrial automation and the BIOS of the CPU module is usually not adapted to the carrier board. Also other drivers implement a fallback like this. Shall I still remove it? > Also, watch out. It might not be ready, but it will get compiled for > x86, mips, powerpc etc, by the build bots, if you don't prevent it. So > it needs to at least be warning free. Yes, of course! Gerhard ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH net-next v2 3/3] tsnep: Add TSN endpoint Ethernet MAC driver 2021-09-02 20:32 ` Gerhard Engleder @ 2021-09-02 21:21 ` Andrew Lunn 2021-09-03 19:53 ` Gerhard Engleder 0 siblings, 1 reply; 16+ messages in thread From: Andrew Lunn @ 2021-09-02 21:21 UTC (permalink / raw) To: Gerhard Engleder; +Cc: David Miller, Jakub Kicinski, netdev, devicetree On Thu, Sep 02, 2021 at 10:32:10PM +0200, Gerhard Engleder wrote: > > > > > +static irqreturn_t tsnep_irq(int irq, void *arg) > > > > > +{ > > > > > + struct tsnep_adapter *adapter = arg; > > > > > + u32 active = ioread32(adapter->addr + ECM_INT_ACTIVE); > > > > > + > > > > > + /* acknowledge interrupt */ > > > > > + if (active != 0) > > > > > + iowrite32(active, adapter->addr + ECM_INT_ACKNOWLEDGE); > > > > > + > > > > > + /* handle management data interrupt */ > > > > > + if ((active & ECM_INT_MD) != 0) { > > > > > + adapter->md_active = false; > > > > > + wake_up_interruptible(&adapter->md_wait); > > > > > + } > > > > > + > > > > > + /* handle link interrupt */ > > > > > + if ((active & ECM_INT_LINK) != 0) { > > > > > + if (adapter->netdev->phydev) { > > > > > + struct phy_device *phydev = adapter->netdev->phydev; > > > > > + u32 status = ioread32(adapter->addr + ECM_STATUS); > > > > > + int link = (status & ECM_NO_LINK) ? 0 : 1; > > > > > + u32 speed = status & ECM_SPEED_MASK; > > > > > > > > How does PHY link and speed get into this MAC register? Is the MAC > > > > polling the PHY over the MDIO bus? Is the PHY internal to the MAC and > > > > it has backdoor access to the PHY status? > > > > > > PHY is external. The MAC expects additional signals for link status. These > > > signals can be derived from RGMII in band signaling of the link status or by > > > using PHY link and speed LED outputs. The MAC is using the link status for > > > a quick no link reaction to minimize the impact to real time applications. > > > EtherCAT for example also uses the link LED output for a no link reaction > > > within a few microseconds. > > > > O.K. This is not the normal Linux way. You normally have the PHY > > driver tell the PHY core, which then tells the MAC driver. That always > > works. RGMII in band signaling is not supported by all PHY devices, > > and the board design would require the LED output are correctly > > connected, and i guess you need a hacked PHY driver to use the correct > > LED meanings? Plus i guess you have additional changes in the PHY > > driver to do fast link down detection? > > Yes, LED outputs must be correctly connected in the board design. LED > outputs are usually configured with strapping pins, which again require a > correct board design. Linux sometime, maybe soon, will be able the control the PHY LEDs, and probably export them to user space so root can change their meaning. > Fast link down detection is a hardware property of the selected > PHY. So far no PHY driver changes were necessary. Marvell PHYs for example follow 802.3 C40 and default to waiting 750ms before reporting the link down. You can configure them to only wait 10ms, 20ms or 40ms. So it sounds like you are using a PHY which does not conform to C40? In general, we probably need to be able to configure this, for those that do follow C40. > > I think this needs another DT property to enable using such short > > cuts, and you should use the Linux way by default. > > Isn't choosing PHY_MAC_INTERRUPT also the Linux way? I preferred it > over PHY_POLL, because I need the link information directly in the MAC > anyway. But maybe the speed information is too much and should be provided > to the MAC. PHY_MAC_INTERRUPT is just the first step. It means something happened in the PHY. You need to ask the PHY what? It could be link up or down, it could be cable diagnostics have finished, the temperature is getting too hot, whatever can cause the PHY to change state. The PHY driver will then determine what has actually happened. Some cases, the MAC does not needed to know. Others the MAC will be told, via the callback it registered. It gets to know the link speed, up down etc. That is the Linux way, the complete chain. > > Also, don't you need a property which tells you to either use RGMII > > inband, or LED signals? > > No, this decision is done in VHDL/FPGA. No need to consume precious FPGA > resources for runtime configuration. You mean you have two ways to synthesis the MAC. You have two bitstreams. One for LEDs and one of inband RGMII? > I'm afraid that relying on ACPI is not always an option. x86 CPU modules are > very often used in industrial automation and the BIOS of the CPU module is > usually not adapted to the carrier board. Yes, i've been there. I have managed to get the BIOS customised, but it is not easy. DT is much easier to use. > Also other drivers implement a fallback like this. Shall I still > remove it? You can keep it. I just don't recommend it, if you can avoid it. But x86... Andrew ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH net-next v2 3/3] tsnep: Add TSN endpoint Ethernet MAC driver 2021-09-02 21:21 ` Andrew Lunn @ 2021-09-03 19:53 ` Gerhard Engleder 0 siblings, 0 replies; 16+ messages in thread From: Gerhard Engleder @ 2021-09-03 19:53 UTC (permalink / raw) To: Andrew Lunn; +Cc: David Miller, Jakub Kicinski, netdev, devicetree > > > > > > +static irqreturn_t tsnep_irq(int irq, void *arg) > > > > > > +{ > > > > > > + struct tsnep_adapter *adapter = arg; > > > > > > + u32 active = ioread32(adapter->addr + ECM_INT_ACTIVE); > > > > > > + > > > > > > + /* acknowledge interrupt */ > > > > > > + if (active != 0) > > > > > > + iowrite32(active, adapter->addr + ECM_INT_ACKNOWLEDGE); > > > > > > + > > > > > > + /* handle management data interrupt */ > > > > > > + if ((active & ECM_INT_MD) != 0) { > > > > > > + adapter->md_active = false; > > > > > > + wake_up_interruptible(&adapter->md_wait); > > > > > > + } > > > > > > + > > > > > > + /* handle link interrupt */ > > > > > > + if ((active & ECM_INT_LINK) != 0) { > > > > > > + if (adapter->netdev->phydev) { > > > > > > + struct phy_device *phydev = adapter->netdev->phydev; > > > > > > + u32 status = ioread32(adapter->addr + ECM_STATUS); > > > > > > + int link = (status & ECM_NO_LINK) ? 0 : 1; > > > > > > + u32 speed = status & ECM_SPEED_MASK; > > > > > > > > > > How does PHY link and speed get into this MAC register? Is the MAC > > > > > polling the PHY over the MDIO bus? Is the PHY internal to the MAC and > > > > > it has backdoor access to the PHY status? > > > > > > > > PHY is external. The MAC expects additional signals for link status. These > > > > signals can be derived from RGMII in band signaling of the link status or by > > > > using PHY link and speed LED outputs. The MAC is using the link status for > > > > a quick no link reaction to minimize the impact to real time applications. > > > > EtherCAT for example also uses the link LED output for a no link reaction > > > > within a few microseconds. > > > > > > O.K. This is not the normal Linux way. You normally have the PHY > > > driver tell the PHY core, which then tells the MAC driver. That always > > > works. RGMII in band signaling is not supported by all PHY devices, > > > and the board design would require the LED output are correctly > > > connected, and i guess you need a hacked PHY driver to use the correct > > > LED meanings? Plus i guess you have additional changes in the PHY > > > driver to do fast link down detection? > > > > Yes, LED outputs must be correctly connected in the board design. LED > > outputs are usually configured with strapping pins, which again require a > > correct board design. > > Linux sometime, maybe soon, will be able the control the PHY LEDs, and > probably export them to user space so root can change their meaning. > > > Fast link down detection is a hardware property of the selected > > PHY. So far no PHY driver changes were necessary. > > Marvell PHYs for example follow 802.3 C40 and default to waiting 750ms > before reporting the link down. You can configure them to only wait > 10ms, 20ms or 40ms. So it sounds like you are using a PHY which does > not conform to C40? In general, we probably need to be able to > configure this, for those that do follow C40. > > > > I think this needs another DT property to enable using such short > > > cuts, and you should use the Linux way by default. > > > > Isn't choosing PHY_MAC_INTERRUPT also the Linux way? I preferred it > > over PHY_POLL, because I need the link information directly in the MAC > > anyway. But maybe the speed information is too much and should be provided > > to the MAC. > > PHY_MAC_INTERRUPT is just the first step. It means something happened > in the PHY. You need to ask the PHY what? It could be link up or down, > it could be cable diagnostics have finished, the temperature is > getting too hot, whatever can cause the PHY to change state. The PHY > driver will then determine what has actually happened. Some cases, the > MAC does not needed to know. Others the MAC will be told, via the > callback it registered. It gets to know the link speed, up down etc. > That is the Linux way, the complete chain. I will reduce the MAC knowledge to "something happened" and let the driver tell it what. Driver and VHDL will be changed. > > > Also, don't you need a property which tells you to either use RGMII > > > inband, or LED signals? > > > > No, this decision is done in VHDL/FPGA. No need to consume precious FPGA > > resources for runtime configuration. > > You mean you have two ways to synthesis the MAC. You have two > bitstreams. One for LEDs and one of inband RGMII? No, not two bitstreams. Just board specific glue logic around the IP core. As mentioned above, it will be changed. > > I'm afraid that relying on ACPI is not always an option. x86 CPU modules are > > very often used in industrial automation and the BIOS of the CPU module is > > usually not adapted to the carrier board. > > Yes, i've been there. I have managed to get the BIOS customised, but > it is not easy. DT is much easier to use. Yes, it is not easy and it makes you cry when you have to switch to a different CPU module. Gerhard ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH net-next v2 3/3] tsnep: Add TSN endpoint Ethernet MAC driver 2021-09-01 21:01 ` Andrew Lunn 2021-09-02 20:32 ` Gerhard Engleder @ 2021-09-24 19:35 ` Gerhard Engleder 1 sibling, 0 replies; 16+ messages in thread From: Gerhard Engleder @ 2021-09-24 19:35 UTC (permalink / raw) To: Andrew Lunn; +Cc: David Miller, Jakub Kicinski, netdev, devicetree > > > > +static int tsnep_ethtool_set_priv_flags(struct net_device *netdev, > > > > + u32 priv_flags) > > > > +{ > > > > + struct tsnep_adapter *adapter = netdev_priv(netdev); > > > > + int retval; > > > > + > > > > + if (priv_flags & ~TSNEP_PRIV_FLAGS) > > > > + return -EINVAL; > > > > + > > > > + if ((priv_flags & TSNEP_PRIV_FLAGS_LOOPBACK_100) && > > > > + (priv_flags & TSNEP_PRIV_FLAGS_LOOPBACK_1000)) > > > > + return -EINVAL; > > > > + > > > > + if ((priv_flags & TSNEP_PRIV_FLAGS_LOOPBACK_100) && > > > > + adapter->loopback != SPEED_100) { > > > > + if (adapter->loopback != SPEED_UNKNOWN) > > > > + retval = phy_loopback(adapter->phydev, false); > > > > + else > > > > + retval = 0; > > > > + > > > > + if (!retval) { > > > > + adapter->phydev->speed = SPEED_100; > > > > + adapter->phydev->duplex = DUPLEX_FULL; > > > > + retval = phy_loopback(adapter->phydev, true); > > > > > > This is a pretty unusual use of private flags, changing loopback at > > > runtime. ethtool --test generally does that. > > > > > > What is your use case which requires loopback in normal operation, not > > > during testing? > > > > Yes it is unusual. I was searching for some user space interface for loopback > > and found drivers/net/ethernet/aquantia/atlantic/aq_ethtool.c which uses > > private flags. > > Ah, that passed my by. I would of probably said something about it. > > > Use case is still testing and not normal operation. Testing is done mostly with > > a user space application, because I don't want to overload the driver with test > > code and test frameworks can be used in user space. With loopback it is > > possible to execute a lot of tests like stressing the MAC with various frame > > lengths and checking TX/RX time stamps. These tests are useful for every > > integration of this IP core into an FPGA and not only for IP core development. > > I did a quick search. CAN has something interesting: > > https://wiki.rdu.im/_pages/Application-Notes/Software/can-bus-in-linux.html > $ sudo ip link set can0 down > $ sudo ip link set can0 type can loopback on > $ sudo ip link set can0 up type can bitrate 1000000 > > Also > > https://www.kernel.org/doc/Documentation/networking/can.txt > > The semantics are maybe slightly different. It appears to loopback can > messages, but also send out the wire. I think many can transcievers > can do this in hardware, but this seems to be a software feature for > when the hardware cannot do it? I have seen Ethernet PHYs which do > send out the wire when in loopback, so it does seem like a reasonable > model. Also i like that you need to down the interface before you can > put it into loopback. Saves a lot of surprises. > > Maybe you can look at this, see if it can be made generic, and could > be used here? CAN loopback is defined in include/uapi/linux/can/netlink.h and iproute2 uses it in ip/iplink_can.c. I did not see any ethernet specific implementation in this area. I have no idea how to make that generic. Ethernet link configuration is done with ethtool. Is it a good idea to add link configuration capabilities to netlink? What about restricting the usage of the loopback flags? They could be restricted to AUTONEG_DISABLE. So at least the link would be in defined start when loopback is activated. Gerhard ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH net-next v2 3/3] tsnep: Add TSN endpoint Ethernet MAC driver 2021-08-31 19:34 ` [PATCH net-next v2 3/3] tsnep: Add TSN endpoint Ethernet MAC driver Gerhard Engleder 2021-08-31 21:55 ` Andrew Lunn @ 2021-08-31 23:12 ` kernel test robot 2021-09-02 23:17 ` Vinicius Costa Gomes 2 siblings, 0 replies; 16+ messages in thread From: kernel test robot @ 2021-08-31 23:12 UTC (permalink / raw) To: Gerhard Engleder, davem, kuba, andrew, robh+dt, michal.simek Cc: kbuild-all, netdev, devicetree, Gerhard Engleder [-- Attachment #1: Type: text/plain, Size: 5911 bytes --] Hi Gerhard, Thank you for the patch! Perhaps something to improve: [auto build test WARNING on net-next/master] url: https://github.com/0day-ci/linux/commits/Gerhard-Engleder/TSN-endpoint-Ethernet-MAC-driver/20210901-033601 base: https://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git 29ce8f9701072fc221d9c38ad952de1a9578f95c config: sh-allmodconfig (attached as .config) compiler: sh4-linux-gcc (GCC) 11.2.0 reproduce (this is a W=1 build): wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross # https://github.com/0day-ci/linux/commit/bd7b8506886248235f157849475c432680aca61c git remote add linux-review https://github.com/0day-ci/linux git fetch --no-tags linux-review Gerhard-Engleder/TSN-endpoint-Ethernet-MAC-driver/20210901-033601 git checkout bd7b8506886248235f157849475c432680aca61c # save the attached .config to linux build tree COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-11.2.0 make.cross ARCH=sh If you fix the issue, kindly add following tag as appropriate Reported-by: kernel test robot <lkp@intel.com> All warnings (new ones prefixed by >>): drivers/net/ethernet/engleder/tsnep_main.c: In function 'tsnep_probe': >> drivers/net/ethernet/engleder/tsnep_main.c:1084:13: warning: variable 'queue_count' set but not used [-Wunused-but-set-variable] 1084 | int queue_count; | ^~~~~~~~~~~ Kconfig warnings: (for reference only) WARNING: unmet direct dependencies detected for SND_ATMEL_SOC_PDC Depends on SOUND && !UML && SND && SND_SOC && SND_ATMEL_SOC && HAS_DMA Selected by - SND_ATMEL_SOC_SSC && SOUND && !UML && SND && SND_SOC && SND_ATMEL_SOC - SND_ATMEL_SOC_SSC_PDC && SOUND && !UML && SND && SND_SOC && SND_ATMEL_SOC && ATMEL_SSC vim +/queue_count +1084 drivers/net/ethernet/engleder/tsnep_main.c 1075 1076 static int tsnep_probe(struct platform_device *pdev) 1077 { 1078 struct tsnep_adapter *adapter; 1079 struct net_device *netdev; 1080 struct resource *io; 1081 u32 type; 1082 int revision; 1083 int version; > 1084 int queue_count; 1085 int retval; 1086 1087 netdev = devm_alloc_etherdev_mqs(&pdev->dev, 1088 sizeof(struct tsnep_adapter), 1089 TSNEP_MAX_QUEUES, TSNEP_MAX_QUEUES); 1090 if (!netdev) 1091 return -ENODEV; 1092 SET_NETDEV_DEV(netdev, &pdev->dev); 1093 adapter = netdev_priv(netdev); 1094 platform_set_drvdata(pdev, adapter); 1095 adapter->pdev = pdev; 1096 adapter->netdev = netdev; 1097 adapter->msg_enable = NETIF_MSG_DRV | NETIF_MSG_PROBE | 1098 NETIF_MSG_LINK | NETIF_MSG_IFUP | 1099 NETIF_MSG_IFDOWN | NETIF_MSG_TX_QUEUED; 1100 1101 netdev->min_mtu = ETH_MIN_MTU; 1102 netdev->max_mtu = TSNEP_MAX_FRAME_SIZE; 1103 1104 spin_lock_init(&adapter->irq_lock); 1105 init_waitqueue_head(&adapter->md_wait); 1106 mutex_init(&adapter->gate_control_lock); 1107 1108 io = platform_get_resource(pdev, IORESOURCE_MEM, 0); 1109 adapter->addr = devm_ioremap_resource(&pdev->dev, io); 1110 if (IS_ERR(adapter->addr)) 1111 return PTR_ERR(adapter->addr); 1112 adapter->size = io->end - io->start + 1; 1113 adapter->irq = platform_get_irq(pdev, 0); 1114 netdev->mem_start = io->start; 1115 netdev->mem_end = io->end; 1116 netdev->irq = adapter->irq; 1117 1118 type = ioread32(adapter->addr + ECM_TYPE); 1119 revision = (type & ECM_REVISION_MASK) >> ECM_REVISION_SHIFT; 1120 version = (type & ECM_VERSION_MASK) >> ECM_VERSION_SHIFT; 1121 queue_count = (type & ECM_QUEUE_COUNT_MASK) >> ECM_QUEUE_COUNT_SHIFT; 1122 adapter->gate_control = type & ECM_GATE_CONTROL; 1123 1124 adapter->num_tx_queues = TSNEP_QUEUES; 1125 adapter->num_rx_queues = TSNEP_QUEUES; 1126 1127 iowrite32(0, adapter->addr + ECM_INT_ENABLE); 1128 retval = devm_request_irq(&adapter->pdev->dev, adapter->irq, tsnep_irq, 1129 0, TSNEP, adapter); 1130 if (retval != 0) { 1131 dev_err(&adapter->pdev->dev, "can't get assigned irq %d.", 1132 adapter->irq); 1133 return retval; 1134 } 1135 tsnep_enable_irq(adapter, ECM_INT_MD | ECM_INT_LINK); 1136 1137 retval = tsnep_mac_init(adapter); 1138 if (retval) 1139 goto mac_init_failed; 1140 1141 retval = tsnep_mdio_init(adapter); 1142 if (retval) 1143 goto mdio_init_failed; 1144 1145 retval = tsnep_phy_init(adapter); 1146 if (retval) 1147 goto phy_init_failed; 1148 1149 retval = tsnep_ptp_init(adapter); 1150 if (retval) 1151 goto ptp_init_failed; 1152 1153 retval = tsnep_tc_init(adapter); 1154 if (retval) 1155 goto tc_init_failed; 1156 1157 netdev->netdev_ops = &tsnep_netdev_ops; 1158 netdev->ethtool_ops = &tsnep_ethtool_ops; 1159 netdev->features = NETIF_F_SG; 1160 netdev->hw_features = netdev->features; 1161 1162 /* carrier off reporting is important to ethtool even BEFORE open */ 1163 netif_carrier_off(netdev); 1164 1165 retval = register_netdev(netdev); 1166 if (retval) 1167 goto register_failed; 1168 1169 dev_info(&adapter->pdev->dev, "device version %d.%02d\n", version, 1170 revision); 1171 if (adapter->gate_control) 1172 dev_info(&adapter->pdev->dev, "gate control detected\n"); 1173 1174 return 0; 1175 1176 unregister_netdev(adapter->netdev); 1177 register_failed: 1178 tsnep_tc_cleanup(adapter); 1179 tc_init_failed: 1180 tsnep_ptp_cleanup(adapter); 1181 ptp_init_failed: 1182 phy_init_failed: 1183 if (adapter->mdiobus) 1184 mdiobus_unregister(adapter->mdiobus); 1185 mdio_init_failed: 1186 mac_init_failed: 1187 return retval; 1188 } 1189 --- 0-DAY CI Kernel Test Service, Intel Corporation https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org [-- Attachment #2: .config.gz --] [-- Type: application/gzip, Size: 55084 bytes --] ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH net-next v2 3/3] tsnep: Add TSN endpoint Ethernet MAC driver 2021-08-31 19:34 ` [PATCH net-next v2 3/3] tsnep: Add TSN endpoint Ethernet MAC driver Gerhard Engleder 2021-08-31 21:55 ` Andrew Lunn 2021-08-31 23:12 ` kernel test robot @ 2021-09-02 23:17 ` Vinicius Costa Gomes 2021-09-03 20:14 ` Gerhard Engleder 2 siblings, 1 reply; 16+ messages in thread From: Vinicius Costa Gomes @ 2021-09-02 23:17 UTC (permalink / raw) To: Gerhard Engleder, davem, kuba, andrew, robh+dt, michal.simek Cc: netdev, devicetree, Gerhard Engleder Gerhard Engleder <gerhard@engleder-embedded.com> writes: > The TSN endpoint Ethernet MAC is a FPGA based network device for > real-time communication. > > It is integrated as Ethernet controller with ethtool and PTP support. > For real-time communcation TC_SETUP_QDISC_TAPRIO is supported. > > Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> > --- [...] > +static int tsnep_netdev_open(struct net_device *netdev) > +{ > + struct tsnep_adapter *adapter = netdev_priv(netdev); > + void *addr; > + int i; > + int retval; > + > + retval = tsnep_phy_open(adapter); > + if (retval) > + return retval; > + > + for (i = 0; i < adapter->num_tx_queues; i++) { > + addr = adapter->addr + TSNEP_QUEUE(i); > + retval = tsnep_tx_open(adapter, &adapter->tx[i], addr); > + if (retval) > + goto tx_failed; > + } > + retval = netif_set_real_num_tx_queues(adapter->netdev, > + adapter->num_tx_queues); > + if (retval) > + goto tx_failed; > + for (i = 0; i < adapter->num_rx_queues; i++) { > + addr = adapter->addr + TSNEP_QUEUE(i); > + retval = tsnep_rx_open(adapter, &adapter->rx[i], addr); > + if (retval) > + goto rx_failed; > + } > + retval = netif_set_real_num_rx_queues(adapter->netdev, > + adapter->num_rx_queues); > + if (retval) > + goto rx_failed; > + > + netif_napi_add(adapter->netdev, &adapter->napi, tsnep_rx_napi_poll, 64); I know that you only have support for 1 queue for now. But having "tx[0]" and "rx[0]" hardcoded in tsnep_rx_napi_poll() seems less than ideal if you want to support more queues in the future. And I think that moving 'struct napi_struct' to be closer to the queues now will help make that future transition to multiqueue to be cleaner. > + napi_enable(&adapter->napi); > + > + tsnep_enable_irq(adapter, ECM_INT_TX_0 | ECM_INT_RX_0); > + > + return 0; > + > +rx_failed: > + for (i = 0; i < adapter->num_rx_queues; i++) > + tsnep_rx_close(&adapter->rx[i]); > +tx_failed: > + for (i = 0; i < adapter->num_tx_queues; i++) > + tsnep_tx_close(&adapter->tx[i]); > + tsnep_phy_close(adapter); > + return retval; > +} > + > +static int tsnep_netdev_close(struct net_device *netdev) > +{ > + struct tsnep_adapter *adapter = netdev_priv(netdev); > + int i; > + > + tsnep_disable_irq(adapter, ECM_INT_TX_0 | ECM_INT_RX_0); > + > + napi_disable(&adapter->napi); > + netif_napi_del(&adapter->napi); > + > + for (i = 0; i < adapter->num_rx_queues; i++) > + tsnep_rx_close(&adapter->rx[i]); > + for (i = 0; i < adapter->num_tx_queues; i++) > + tsnep_tx_close(&adapter->tx[i]); > + > + tsnep_phy_close(adapter); > + > + return 0; > +} > + > +static netdev_tx_t tsnep_netdev_xmit_frame(struct sk_buff *skb, > + struct net_device *netdev) > +{ > + struct tsnep_adapter *adapter = netdev_priv(netdev); > + u16 queue_mapping = skb_get_queue_mapping(skb); > + > + if (queue_mapping >= adapter->num_tx_queues) > + queue_mapping = 0; > + > + return tsnep_xmit_frame_ring(skb, &adapter->tx[queue_mapping]); > +} > + > +static int tsnep_netdev_ioctl(struct net_device *netdev, struct ifreq *ifr, > + int cmd) > +{ > + if (!netif_running(netdev)) > + return -EINVAL; > + if (cmd == SIOCSHWTSTAMP || cmd == SIOCGHWTSTAMP) > + return tsnep_ptp_ioctl(netdev, ifr, cmd); > + return phy_mii_ioctl(netdev->phydev, ifr, cmd); > +} > + > +static void tsnep_netdev_set_multicast(struct net_device *netdev) > +{ > + struct tsnep_adapter *adapter = netdev_priv(netdev); > + > + u16 rx_filter = 0; > + > + /* configured MAC address and broadcasts are never filtered */ > + if (netdev->flags & IFF_PROMISC) { > + rx_filter |= TSNEP_RX_FILTER_ACCEPT_ALL_MULTICASTS; > + rx_filter |= TSNEP_RX_FILTER_ACCEPT_ALL_UNICASTS; > + } else if (!netdev_mc_empty(netdev) || (netdev->flags & IFF_ALLMULTI)) { > + rx_filter |= TSNEP_RX_FILTER_ACCEPT_ALL_MULTICASTS; > + } > + iowrite16(rx_filter, adapter->addr + TSNEP_RX_FILTER); > +} > + > +static void tsnep_netdev_get_stats64(struct net_device *netdev, > + struct rtnl_link_stats64 *stats) > +{ > + struct tsnep_adapter *adapter = netdev_priv(netdev); > + u32 reg; > + u32 val; > + int i; > + > + for (i = 0; i < adapter->num_tx_queues; i++) { > + stats->tx_packets += adapter->tx[i].packets; > + stats->tx_bytes += adapter->tx[i].bytes; > + stats->tx_dropped += adapter->tx[i].dropped; > + } > + for (i = 0; i < adapter->num_rx_queues; i++) { > + stats->rx_packets += adapter->rx[i].packets; > + stats->rx_bytes += adapter->rx[i].bytes; > + stats->rx_dropped += adapter->rx[i].dropped; > + stats->multicast += adapter->rx[i].multicast; > + > + reg = ioread32(adapter->addr + TSNEP_QUEUE(i) + > + TSNEP_RX_STATISTIC); > + val = (reg & TSNEP_RX_STATISTIC_NO_DESC_MASK) >> > + TSNEP_RX_STATISTIC_NO_DESC_SHIFT; > + stats->rx_dropped += val; > + val = (reg & TSNEP_RX_STATISTIC_BUFFER_TOO_SMALL_MASK) >> > + TSNEP_RX_STATISTIC_BUFFER_TOO_SMALL_SHIFT; > + stats->rx_dropped += val; > + val = (reg & TSNEP_RX_STATISTIC_FIFO_OVERFLOW_MASK) >> > + TSNEP_RX_STATISTIC_FIFO_OVERFLOW_SHIFT; > + stats->rx_errors += val; > + stats->rx_fifo_errors += val; > + val = (reg & TSNEP_RX_STATISTIC_INVALID_FRAME_MASK) >> > + TSNEP_RX_STATISTIC_INVALID_FRAME_SHIFT; > + stats->rx_errors += val; > + stats->rx_frame_errors += val; > + } > + > + reg = ioread32(adapter->addr + ECM_STAT); > + val = (reg & ECM_STAT_RX_ERR_MASK) >> ECM_STAT_RX_ERR_SHIFT; > + stats->rx_errors += val; > + val = (reg & ECM_STAT_INV_FRM_MASK) >> ECM_STAT_INV_FRM_SHIFT; > + stats->rx_errors += val; > + stats->rx_crc_errors += val; > + val = (reg & ECM_STAT_FWD_RX_ERR_MASK) >> ECM_STAT_FWD_RX_ERR_SHIFT; > + stats->rx_errors += val; > +} > + > +static void tsnep_mac_set_address(struct tsnep_adapter *adapter, u8 *addr) > +{ > + iowrite32(*(u32 *)addr, adapter->addr + TSNEP_MAC_ADDRESS_LOW); > + iowrite16(*(u16 *)(addr + sizeof(u32)), > + adapter->addr + TSNEP_MAC_ADDRESS_HIGH); > + > + ether_addr_copy(adapter->mac_address, addr); > + netif_info(adapter, drv, adapter->netdev, "MAC address set to %pM\n", > + addr); > +} > + > +static int tsnep_netdev_set_mac_address(struct net_device *netdev, void *addr) > +{ > + struct tsnep_adapter *adapter = netdev_priv(netdev); > + struct sockaddr *sock_addr = addr; > + int retval; > + > + retval = eth_prepare_mac_addr_change(netdev, sock_addr); > + if (retval) > + return retval; > + ether_addr_copy(netdev->dev_addr, sock_addr->sa_data); > + tsnep_mac_set_address(adapter, sock_addr->sa_data); > + > + return 0; > +} > + > +static const struct net_device_ops tsnep_netdev_ops = { > + .ndo_open = tsnep_netdev_open, > + .ndo_stop = tsnep_netdev_close, > + .ndo_start_xmit = tsnep_netdev_xmit_frame, > + .ndo_eth_ioctl = tsnep_netdev_ioctl, > + .ndo_set_rx_mode = tsnep_netdev_set_multicast, > + > + .ndo_get_stats64 = tsnep_netdev_get_stats64, > + .ndo_set_mac_address = tsnep_netdev_set_mac_address, > + .ndo_setup_tc = tsnep_tc_setup, > +}; > + > +static int tsnep_mac_init(struct tsnep_adapter *adapter) > +{ > + int retval; > + > + /* initialize RX filtering, at least configured MAC address and > + * broadcast are not filtered > + */ > + iowrite16(0, adapter->addr + TSNEP_RX_FILTER); > + > + /* try to get MAC address in the following order: > + * - device tree > + * - MAC address register if valid > + * - random MAC address > + */ > + retval = of_get_mac_address(adapter->pdev->dev.of_node, > + adapter->mac_address); > + if (retval == -EPROBE_DEFER) > + return retval; > + if (retval) { > + *(u32 *)adapter->mac_address = > + ioread32(adapter->addr + TSNEP_MAC_ADDRESS_LOW); > + *(u16 *)(adapter->mac_address + sizeof(u32)) = > + ioread16(adapter->addr + TSNEP_MAC_ADDRESS_HIGH); > + if (!is_valid_ether_addr(adapter->mac_address)) > + eth_random_addr(adapter->mac_address); > + } > + > + tsnep_mac_set_address(adapter, adapter->mac_address); > + ether_addr_copy(adapter->netdev->dev_addr, adapter->mac_address); > + > + return 0; > +} > + > +static int tsnep_mdio_init(struct tsnep_adapter *adapter) > +{ > + struct device_node *node; > + int retval; > + > + node = of_get_child_by_name(adapter->pdev->dev.of_node, "mdio"); > + if (!node) > + return 0; > + > + adapter->mdiobus = devm_mdiobus_alloc(&adapter->pdev->dev); > + if (!adapter->mdiobus) { > + retval = -ENOMEM; > + > + goto out; > + } > + > + adapter->mdiobus->priv = (void *)adapter; > + adapter->mdiobus->parent = &adapter->pdev->dev; > + adapter->mdiobus->read = tsnep_mdiobus_read; > + adapter->mdiobus->write = tsnep_mdiobus_write; > + adapter->mdiobus->name = TSNEP "-mdiobus"; > + snprintf(adapter->mdiobus->id, MII_BUS_ID_SIZE, "%s", > + adapter->pdev->name); > + > + retval = of_mdiobus_register(adapter->mdiobus, node); > +out: > + of_node_put(node); > + > + return retval; > +} > + > +static int tsnep_phy_init(struct tsnep_adapter *adapter) > +{ > + struct device_node *dn; > + int retval; > + > + retval = of_get_phy_mode(adapter->pdev->dev.of_node, > + &adapter->phy_mode); > + if (retval) > + adapter->phy_mode = PHY_INTERFACE_MODE_GMII; > + > + dn = of_parse_phandle(adapter->pdev->dev.of_node, "phy-handle", 0); > + adapter->phydev = of_phy_find_device(dn); > + of_node_put(dn); > + if (!adapter->phydev && adapter->mdiobus) > + adapter->phydev = phy_find_first(adapter->mdiobus); > + if (!adapter->phydev) > + return -EIO; > + > + return 0; > +} > + > +static int tsnep_probe(struct platform_device *pdev) > +{ > + struct tsnep_adapter *adapter; > + struct net_device *netdev; > + struct resource *io; > + u32 type; > + int revision; > + int version; > + int queue_count; > + int retval; > + > + netdev = devm_alloc_etherdev_mqs(&pdev->dev, > + sizeof(struct tsnep_adapter), > + TSNEP_MAX_QUEUES, TSNEP_MAX_QUEUES); > + if (!netdev) > + return -ENODEV; > + SET_NETDEV_DEV(netdev, &pdev->dev); > + adapter = netdev_priv(netdev); > + platform_set_drvdata(pdev, adapter); > + adapter->pdev = pdev; > + adapter->netdev = netdev; > + adapter->msg_enable = NETIF_MSG_DRV | NETIF_MSG_PROBE | > + NETIF_MSG_LINK | NETIF_MSG_IFUP | > + NETIF_MSG_IFDOWN | NETIF_MSG_TX_QUEUED; > + > + netdev->min_mtu = ETH_MIN_MTU; > + netdev->max_mtu = TSNEP_MAX_FRAME_SIZE; > + > + spin_lock_init(&adapter->irq_lock); > + init_waitqueue_head(&adapter->md_wait); > + mutex_init(&adapter->gate_control_lock); > + > + io = platform_get_resource(pdev, IORESOURCE_MEM, 0); > + adapter->addr = devm_ioremap_resource(&pdev->dev, io); > + if (IS_ERR(adapter->addr)) > + return PTR_ERR(adapter->addr); > + adapter->size = io->end - io->start + 1; > + adapter->irq = platform_get_irq(pdev, 0); > + netdev->mem_start = io->start; > + netdev->mem_end = io->end; > + netdev->irq = adapter->irq; > + > + type = ioread32(adapter->addr + ECM_TYPE); > + revision = (type & ECM_REVISION_MASK) >> ECM_REVISION_SHIFT; > + version = (type & ECM_VERSION_MASK) >> ECM_VERSION_SHIFT; > + queue_count = (type & ECM_QUEUE_COUNT_MASK) >> ECM_QUEUE_COUNT_SHIFT; > + adapter->gate_control = type & ECM_GATE_CONTROL; > + > + adapter->num_tx_queues = TSNEP_QUEUES; > + adapter->num_rx_queues = TSNEP_QUEUES; > + > + iowrite32(0, adapter->addr + ECM_INT_ENABLE); > + retval = devm_request_irq(&adapter->pdev->dev, adapter->irq, tsnep_irq, > + 0, TSNEP, adapter); > + if (retval != 0) { > + dev_err(&adapter->pdev->dev, "can't get assigned irq %d.", > + adapter->irq); > + return retval; > + } > + tsnep_enable_irq(adapter, ECM_INT_MD | ECM_INT_LINK); > + > + retval = tsnep_mac_init(adapter); > + if (retval) > + goto mac_init_failed; > + > + retval = tsnep_mdio_init(adapter); > + if (retval) > + goto mdio_init_failed; > + > + retval = tsnep_phy_init(adapter); > + if (retval) > + goto phy_init_failed; > + > + retval = tsnep_ptp_init(adapter); > + if (retval) > + goto ptp_init_failed; > + > + retval = tsnep_tc_init(adapter); > + if (retval) > + goto tc_init_failed; > + > + netdev->netdev_ops = &tsnep_netdev_ops; > + netdev->ethtool_ops = &tsnep_ethtool_ops; > + netdev->features = NETIF_F_SG; > + netdev->hw_features = netdev->features; > + > + /* carrier off reporting is important to ethtool even BEFORE open */ > + netif_carrier_off(netdev); > + > + retval = register_netdev(netdev); > + if (retval) > + goto register_failed; > + > + dev_info(&adapter->pdev->dev, "device version %d.%02d\n", version, > + revision); > + if (adapter->gate_control) > + dev_info(&adapter->pdev->dev, "gate control detected\n"); > + > + return 0; > + > + unregister_netdev(adapter->netdev); > +register_failed: > + tsnep_tc_cleanup(adapter); > +tc_init_failed: > + tsnep_ptp_cleanup(adapter); > +ptp_init_failed: > +phy_init_failed: > + if (adapter->mdiobus) > + mdiobus_unregister(adapter->mdiobus); > +mdio_init_failed: > +mac_init_failed: > + return retval; > +} > + > +static int tsnep_remove(struct platform_device *pdev) > +{ > + struct tsnep_adapter *adapter = platform_get_drvdata(pdev); > + > + unregister_netdev(adapter->netdev); > + > + tsnep_tc_cleanup(adapter); > + > + tsnep_ptp_cleanup(adapter); > + > + if (adapter->mdiobus) > + mdiobus_unregister(adapter->mdiobus); > + > + iowrite32(0, adapter->addr + ECM_INT_ENABLE); > + > + return 0; > +} > + > +static const struct of_device_id tsnep_of_match[] = { > + { .compatible = "engleder,tsnep", }, > +{ }, > +}; > +MODULE_DEVICE_TABLE(of, tsnep_of_match); > + > +static struct platform_driver tsnep_driver = { > + .driver = { > + .name = TSNEP, > + .owner = THIS_MODULE, > + .of_match_table = of_match_ptr(tsnep_of_match), > + }, > + .probe = tsnep_probe, > + .remove = tsnep_remove, > +}; > +module_platform_driver(tsnep_driver); > + > +MODULE_AUTHOR("Gerhard Engleder <gerhard@engleder-embedded.com>"); > +MODULE_DESCRIPTION("TSN endpoint Ethernet MAC driver"); > +MODULE_LICENSE("GPL"); > diff --git a/drivers/net/ethernet/engleder/tsnep_ptp.c b/drivers/net/ethernet/engleder/tsnep_ptp.c > new file mode 100644 > index 000000000000..4bfb4d8508f5 > --- /dev/null > +++ b/drivers/net/ethernet/engleder/tsnep_ptp.c > @@ -0,0 +1,221 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* Copyright (C) 2021 Gerhard Engleder <gerhard@engleder-embedded.com> */ > + > +#include "tsnep.h" > + > +void tsnep_get_system_time(struct tsnep_adapter *adapter, u64 *time) > +{ > + u32 high_before; > + u32 low; > + u32 high; > + > + /* read high dword twice to detect overrun */ > + high = ioread32(adapter->addr + ECM_SYSTEM_TIME_HIGH); > + do { > + low = ioread32(adapter->addr + ECM_SYSTEM_TIME_LOW); > + high_before = high; > + high = ioread32(adapter->addr + ECM_SYSTEM_TIME_HIGH); > + } while (high != high_before); > + *time = (((u64)high) << 32) | ((u64)low); > +} > + > +int tsnep_ptp_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) > +{ > + struct tsnep_adapter *adapter = netdev_priv(netdev); > + struct hwtstamp_config config; > + > + if (!ifr) > + return -EINVAL; > + > + if (cmd == SIOCSHWTSTAMP) { > + if (copy_from_user(&config, ifr->ifr_data, sizeof(config))) > + return -EFAULT; > + > + if (config.flags) > + return -EINVAL; > + > + switch (config.tx_type) { > + case HWTSTAMP_TX_OFF: > + case HWTSTAMP_TX_ON: > + break; > + default: > + return -ERANGE; > + } > + > + switch (config.rx_filter) { > + case HWTSTAMP_FILTER_NONE: > + break; > + case HWTSTAMP_FILTER_ALL: > + case HWTSTAMP_FILTER_PTP_V1_L4_EVENT: > + case HWTSTAMP_FILTER_PTP_V1_L4_SYNC: > + case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ: > + case HWTSTAMP_FILTER_PTP_V2_L4_EVENT: > + case HWTSTAMP_FILTER_PTP_V2_L4_SYNC: > + case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ: > + case HWTSTAMP_FILTER_PTP_V2_L2_EVENT: > + case HWTSTAMP_FILTER_PTP_V2_L2_SYNC: > + case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ: > + case HWTSTAMP_FILTER_PTP_V2_EVENT: > + case HWTSTAMP_FILTER_PTP_V2_SYNC: > + case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ: > + case HWTSTAMP_FILTER_NTP_ALL: > + config.rx_filter = HWTSTAMP_FILTER_ALL; > + break; > + default: > + return -ERANGE; > + } > + > + memcpy(&adapter->hwtstamp_config, &config, > + sizeof(adapter->hwtstamp_config)); > + } > + > + if (copy_to_user(ifr->ifr_data, &adapter->hwtstamp_config, > + sizeof(adapter->hwtstamp_config))) > + return -EFAULT; > + > + return 0; > +} > + > +static int tsnep_ptp_adjfine(struct ptp_clock_info *ptp, long scaled_ppm) > +{ > + struct tsnep_adapter *adapter = container_of(ptp, struct tsnep_adapter, > + ptp_clock_info); > + bool negative = false; > + u64 rate_offset; > + > + if (scaled_ppm < 0) { > + scaled_ppm = -scaled_ppm; > + negative = true; > + } > + > + /* convert from 16 bit to 32 bit binary fractional, divide by 1000000 to > + * eliminate ppm, multiply with 8 to compensate 8ns clock cycle time, > + * simplify calculation because 15625 * 8 = 1000000 / 8 > + */ > + rate_offset = scaled_ppm; > + rate_offset <<= 16 - 3; > + rate_offset = div_u64(rate_offset, 15625); > + > + rate_offset &= ECM_CLOCK_RATE_OFFSET_MASK; > + if (negative) > + rate_offset |= ECM_CLOCK_RATE_OFFSET_SIGN; > + iowrite32(rate_offset & 0xFFFFFFFF, adapter->addr + ECM_CLOCK_RATE); > + > + return 0; > +} > + > +static int tsnep_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta) > +{ > + struct tsnep_adapter *adapter = container_of(ptp, struct tsnep_adapter, > + ptp_clock_info); > + u64 system_time; > + unsigned long flags; > + > + spin_lock_irqsave(&adapter->ptp_lock, flags); > + > + tsnep_get_system_time(adapter, &system_time); > + > + system_time += delta; > + > + /* high dword is buffered in hardware and synchronously written to > + * system time when low dword is written > + */ > + iowrite32(system_time >> 32, adapter->addr + ECM_SYSTEM_TIME_HIGH); > + iowrite32(system_time & 0xFFFFFFFF, > + adapter->addr + ECM_SYSTEM_TIME_LOW); > + > + spin_unlock_irqrestore(&adapter->ptp_lock, flags); > + > + return 0; > +} > + > +static int tsnep_ptp_gettimex64(struct ptp_clock_info *ptp, > + struct timespec64 *ts, > + struct ptp_system_timestamp *sts) > +{ > + struct tsnep_adapter *adapter = container_of(ptp, struct tsnep_adapter, > + ptp_clock_info); > + u32 high_before; > + u32 low; > + u32 high; > + u64 system_time; > + > + /* read high dword twice to detect overrun */ > + high = ioread32(adapter->addr + ECM_SYSTEM_TIME_HIGH); > + do { > + ptp_read_system_prets(sts); > + low = ioread32(adapter->addr + ECM_SYSTEM_TIME_LOW); > + ptp_read_system_postts(sts); > + high_before = high; > + high = ioread32(adapter->addr + ECM_SYSTEM_TIME_HIGH); > + } while (high != high_before); > + system_time = (((u64)high) << 32) | ((u64)low); > + > + *ts = ns_to_timespec64(system_time); > + > + return 0; > +} > + > +static int tsnep_ptp_settime64(struct ptp_clock_info *ptp, > + const struct timespec64 *ts) > +{ > + struct tsnep_adapter *adapter = container_of(ptp, struct tsnep_adapter, > + ptp_clock_info); > + u64 system_time = timespec64_to_ns(ts); > + unsigned long flags; > + > + spin_lock_irqsave(&adapter->ptp_lock, flags); > + > + /* high dword is buffered in hardware and synchronously written to > + * system time when low dword is written > + */ > + iowrite32(system_time >> 32, adapter->addr + ECM_SYSTEM_TIME_HIGH); > + iowrite32(system_time & 0xFFFFFFFF, > + adapter->addr + ECM_SYSTEM_TIME_LOW); > + > + spin_unlock_irqrestore(&adapter->ptp_lock, flags); > + > + return 0; > +} > + > +int tsnep_ptp_init(struct tsnep_adapter *adapter) > +{ > + int retval = 0; > + > + adapter->hwtstamp_config.rx_filter = HWTSTAMP_FILTER_NONE; > + adapter->hwtstamp_config.tx_type = HWTSTAMP_TX_OFF; > + > + snprintf(adapter->ptp_clock_info.name, 16, "%s", TSNEP); > + adapter->ptp_clock_info.owner = THIS_MODULE; > + /* at most 2^-1ns adjustment every clock cycle for 8ns clock cycle time, > + * stay slightly below because only bits below 2^-1ns are supported > + */ > + adapter->ptp_clock_info.max_adj = (500000000 / 8 - 1); > + adapter->ptp_clock_info.adjfine = tsnep_ptp_adjfine; > + adapter->ptp_clock_info.adjtime = tsnep_ptp_adjtime; > + adapter->ptp_clock_info.gettimex64 = tsnep_ptp_gettimex64; > + adapter->ptp_clock_info.settime64 = tsnep_ptp_settime64; > + > + spin_lock_init(&adapter->ptp_lock); > + > + adapter->ptp_clock = ptp_clock_register(&adapter->ptp_clock_info, > + &adapter->pdev->dev); > + if (IS_ERR(adapter->ptp_clock)) { > + netdev_err(adapter->netdev, "ptp_clock_register failed\n"); > + > + retval = PTR_ERR(adapter->ptp_clock); > + adapter->ptp_clock = NULL; > + } else if (adapter->ptp_clock) { > + netdev_info(adapter->netdev, "PHC added\n"); > + } > + > + return retval; > +} > + > +void tsnep_ptp_cleanup(struct tsnep_adapter *adapter) > +{ > + if (adapter->ptp_clock) { > + ptp_clock_unregister(adapter->ptp_clock); > + netdev_info(adapter->netdev, "PHC removed\n"); > + } > +} > diff --git a/drivers/net/ethernet/engleder/tsnep_tc.c b/drivers/net/ethernet/engleder/tsnep_tc.c > new file mode 100644 > index 000000000000..2b88c1e2eb2c > --- /dev/null > +++ b/drivers/net/ethernet/engleder/tsnep_tc.c > @@ -0,0 +1,442 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* Copyright (C) 2021 Gerhard Engleder <gerhard@engleder-embedded.com> */ > + > +#include "tsnep.h" > + > +#include <net/pkt_sched.h> > + > +/* save one operation at the end for additional operation at list change */ > +#define TSNEP_MAX_GCL_NUM (TSNEP_GCL_COUNT - 1) > + > +static int tsnep_validate_gcl(struct tc_taprio_qopt_offload *qopt) > +{ > + int i; > + u64 cycle_time; > + > + if (!qopt->cycle_time) > + return -ERANGE; > + if (qopt->num_entries > TSNEP_MAX_GCL_NUM) > + return -EINVAL; > + cycle_time = 0; > + for (i = 0; i < qopt->num_entries; i++) { > + if (qopt->entries[i].command != TC_TAPRIO_CMD_SET_GATES) > + return -EINVAL; > + if (qopt->entries[i].gate_mask & ~TSNEP_GCL_MASK) > + return -EINVAL; > + if (qopt->entries[i].interval < TSNEP_GCL_MIN_INTERVAL) > + return -EINVAL; > + cycle_time += qopt->entries[i].interval; > + } > + if (qopt->cycle_time != cycle_time) > + return -EINVAL; > + if (qopt->cycle_time_extension >= qopt->cycle_time) > + return -EINVAL; > + > + return 0; > +} > + > +static void tsnep_write_gcl_operation(struct tsnep_gcl *gcl, int index, > + u32 properties, u32 interval, bool flush) > +{ > + void *addr = gcl->addr + sizeof(struct tsnep_gcl_operation) * index; > + > + gcl->operation[index].properties = properties; > + gcl->operation[index].interval = interval; > + > + iowrite32(properties, addr); > + iowrite32(interval, addr + sizeof(u32)); > + > + if (flush) { > + /* flush write with read access */ > + ioread32(addr); > + } > +} > + > +static u64 tsnep_change_duration(struct tsnep_gcl *gcl, int index) > +{ > + u64 duration; > + int count; > + > + /* change needs to be triggered one or two operations before start of > + * new gate control list > + * - change is triggered at start of operation (minimum one operation) > + * - operation with adjusted interval is inserted on demand to exactly > + * meet the start of the new gate control list (optional) > + * > + * additionally properties are read directly after start of previous > + * operation > + * > + * therefore, three operations needs to be considered for the limit > + */ > + duration = 0; > + count = 3; > + while (count) { > + duration += gcl->operation[index].interval; > + > + index--; > + if (index < 0) > + index = gcl->count - 1; > + > + count--; > + } > + > + return duration; > +} > + > +static void tsnep_write_gcl(struct tsnep_gcl *gcl, > + struct tc_taprio_qopt_offload *qopt) > +{ > + int i; > + u32 properties; > + u64 extend; > + u64 cut; > + > + gcl->base_time = ktime_to_ns(qopt->base_time); > + gcl->cycle_time = qopt->cycle_time; > + gcl->cycle_time_extension = qopt->cycle_time_extension; > + > + for (i = 0; i < qopt->num_entries; i++) { > + properties = qopt->entries[i].gate_mask; > + if (i == (qopt->num_entries - 1)) > + properties |= TSNEP_GCL_LAST; > + > + tsnep_write_gcl_operation(gcl, i, properties, > + qopt->entries[i].interval, true); > + } > + gcl->count = qopt->num_entries; > + > + /* calculate change limit; i.e., the time needed between enable and > + * start of new gate control list > + */ > + > + /* case 1: extend cycle time for change > + * - change duration of last operation > + * - cycle time extension > + */ > + extend = tsnep_change_duration(gcl, gcl->count - 1); > + extend += gcl->cycle_time_extension; > + > + /* case 2: cut cycle time for change > + * - maximum change duration > + */ > + cut = 0; > + for (i = 0; i < gcl->count; i++) > + cut = max(cut, tsnep_change_duration(gcl, i)); > + > + /* use maximum, because the actual case (extend or cut) can be > + * determined only after limit is known (chicken-and-egg problem) > + */ > + gcl->change_limit = max(extend, cut); > +} > + > +static u64 tsnep_gcl_start_after(struct tsnep_gcl *gcl, u64 limit) > +{ > + u64 start = gcl->base_time; > + u64 n; > + > + if (start <= limit) { > + n = div64_u64(limit - start, gcl->cycle_time); > + start += (n + 1) * gcl->cycle_time; > + } > + > + return start; > +} > + > +static u64 tsnep_gcl_start_before(struct tsnep_gcl *gcl, u64 limit) > +{ > + u64 start = gcl->base_time; > + u64 n; > + > + n = div64_u64(limit - start, gcl->cycle_time); > + start += n * gcl->cycle_time; > + if (start == limit) > + start -= gcl->cycle_time; > + > + return start; > +} > + > +static u64 tsnep_set_gcl_change(struct tsnep_gcl *gcl, int index, u64 change, > + bool insert) > +{ > + /* previous operation triggers change and properties are evaluated at > + * start of operation > + */ > + if (index == 0) > + index = gcl->count - 1; > + else > + index = index - 1; > + change -= gcl->operation[index].interval; > + > + /* optionally change to new list with additional operation in between */ > + if (insert) { > + void *addr = gcl->addr + > + sizeof(struct tsnep_gcl_operation) * index; > + > + gcl->operation[index].properties |= TSNEP_GCL_INSERT; > + iowrite32(gcl->operation[index].properties, addr); > + } > + > + return change; > +} > + > +static void tsnep_clean_gcl(struct tsnep_gcl *gcl) > +{ > + int i; > + u32 mask = TSNEP_GCL_LAST | TSNEP_GCL_MASK; > + void *addr; > + > + /* search for insert operation and reset properties */ > + for (i = 0; i < gcl->count; i++) { > + if (gcl->operation[i].properties & ~mask) { > + addr = gcl->addr + > + sizeof(struct tsnep_gcl_operation) * i; > + > + gcl->operation[i].properties &= mask; > + iowrite32(gcl->operation[i].properties, addr); > + > + break; > + } > + } > +} > + > +static u64 tsnep_insert_gcl_operation(struct tsnep_gcl *gcl, int ref, > + u64 change, u32 interval) > +{ > + u32 properties; > + > + properties = gcl->operation[ref].properties & TSNEP_GCL_MASK; > + /* change to new list directly after inserted operation */ > + properties |= TSNEP_GCL_CHANGE; > + > + /* last operation of list is reserved to insert operation */ > + tsnep_write_gcl_operation(gcl, TSNEP_GCL_COUNT - 1, properties, > + interval, false); > + > + return tsnep_set_gcl_change(gcl, ref, change, true); > +} > + > +static u64 tsnep_extend_gcl(struct tsnep_gcl *gcl, u64 start, u32 extension) > +{ > + int ref = gcl->count - 1; > + u32 interval = gcl->operation[ref].interval + extension; > + > + start -= gcl->operation[ref].interval; > + > + return tsnep_insert_gcl_operation(gcl, ref, start, interval); > +} > + > +static u64 tsnep_cut_gcl(struct tsnep_gcl *gcl, u64 start, u64 cycle_time) > +{ > + u64 sum = 0; > + int i; > + > + /* find operation which shall be cutted */ > + for (i = 0; i < gcl->count; i++) { > + u64 sum_tmp = sum + gcl->operation[i].interval; > + u64 interval; > + > + /* sum up operations as long as cycle time is not exceeded */ > + if (sum_tmp > cycle_time) > + break; > + > + /* remaining interval must be big enough for hardware */ > + interval = cycle_time - sum_tmp; > + if (interval > 0 && interval < TSNEP_GCL_MIN_INTERVAL) > + break; > + > + sum = sum_tmp; > + } > + if (sum == cycle_time) { > + /* no need to cut operation itself or whole cycle > + * => change exactly at operation > + */ > + return tsnep_set_gcl_change(gcl, i, start + sum, false); > + } > + return tsnep_insert_gcl_operation(gcl, i, start + sum, > + cycle_time - sum); > +} > + > +static int tsnep_enable_gcl(struct tsnep_adapter *adapter, > + struct tsnep_gcl *gcl, struct tsnep_gcl *curr) > +{ > + u64 system_time; > + u64 timeout; > + u64 limit; > + > + /* estimate timeout limit after timeout enable, actually timeout limit > + * in hardware will be earlier than estimate so we are on the safe side > + */ > + tsnep_get_system_time(adapter, &system_time); > + timeout = system_time + TSNEP_GC_TIMEOUT; > + > + if (curr) > + limit = timeout + curr->change_limit; > + else > + limit = timeout; > + > + gcl->start_time = tsnep_gcl_start_after(gcl, limit); > + > + /* gate control time register is only 32bit => time shall be in the near > + * future (no driver support for far future implemented) > + */ > + if ((gcl->start_time - system_time) >= U32_MAX) > + return -EAGAIN; > + > + if (curr) { > + /* change gate control list */ > + u64 last; > + u64 change; > + > + last = tsnep_gcl_start_before(curr, gcl->start_time); > + if ((last + curr->cycle_time) == gcl->start_time) > + change = tsnep_cut_gcl(curr, last, > + gcl->start_time - last); > + else if (((gcl->start_time - last) <= > + curr->cycle_time_extension) || > + ((gcl->start_time - last) <= TSNEP_GCL_MIN_INTERVAL)) > + change = tsnep_extend_gcl(curr, last, > + gcl->start_time - last); > + else > + change = tsnep_cut_gcl(curr, last, > + gcl->start_time - last); > + > + WARN_ON(change <= timeout); > + gcl->change = true; > + iowrite32(change & 0xFFFFFFFF, adapter->addr + TSNEP_GC_CHANGE); > + } else { > + /* start gate control list */ > + WARN_ON(gcl->start_time <= timeout); > + gcl->change = false; > + iowrite32(gcl->start_time & 0xFFFFFFFF, > + adapter->addr + TSNEP_GC_TIME); > + } > + > + return 0; > +} > + > +static int tsnep_taprio(struct tsnep_adapter *adapter, > + struct tc_taprio_qopt_offload *qopt) > +{ > + struct tsnep_gcl *gcl; > + struct tsnep_gcl *curr; > + int retval; > + > + if (!adapter->gate_control) > + return -EOPNOTSUPP; > + > + if (!qopt->enable) { > + /* disable gate control if active */ > + mutex_lock(&adapter->gate_control_lock); > + > + if (adapter->gate_control_active) { > + iowrite8(TSNEP_GC_DISABLE, adapter->addr + TSNEP_GC); > + adapter->gate_control_active = false; > + } > + > + mutex_unlock(&adapter->gate_control_lock); > + > + return 0; > + } > + > + retval = tsnep_validate_gcl(qopt); > + if (retval) > + return retval; > + > + mutex_lock(&adapter->gate_control_lock); > + > + gcl = &adapter->gcl[adapter->next_gcl]; > + tsnep_write_gcl(gcl, qopt); > + > + /* select current gate control list if active */ > + if (adapter->gate_control_active) { > + if (adapter->next_gcl == 0) > + curr = &adapter->gcl[1]; > + else > + curr = &adapter->gcl[0]; > + } else { > + curr = NULL; > + } > + > + for (;;) { > + /* start timeout which discards late enable, this helps ensuring > + * that start/change time are in the future at enable > + */ > + iowrite8(TSNEP_GC_ENABLE_TIMEOUT, adapter->addr + TSNEP_GC); > + > + retval = tsnep_enable_gcl(adapter, gcl, curr); > + if (retval) { > + mutex_unlock(&adapter->gate_control_lock); > + > + return retval; > + } > + > + /* enable gate control list */ > + if (adapter->next_gcl == 0) > + iowrite8(TSNEP_GC_ENABLE_A, adapter->addr + TSNEP_GC); > + else > + iowrite8(TSNEP_GC_ENABLE_B, adapter->addr + TSNEP_GC); > + > + /* done if timeout did not happen */ > + if (!(ioread32(adapter->addr + TSNEP_GC) & > + TSNEP_GC_TIMEOUT_SIGNAL)) > + break; > + > + /* timeout is acknowledged with any enable */ > + iowrite8(TSNEP_GC_ENABLE_A, adapter->addr + TSNEP_GC); > + > + if (curr) > + tsnep_clean_gcl(curr); > + > + /* retry because of timeout */ > + } > + > + adapter->gate_control_active = true; > + > + if (adapter->next_gcl == 0) > + adapter->next_gcl = 1; > + else > + adapter->next_gcl = 0; > + > + mutex_unlock(&adapter->gate_control_lock); > + > + return 0; > +} > + > +int tsnep_tc_setup(struct net_device *netdev, enum tc_setup_type type, > + void *type_data) > +{ > + struct tsnep_adapter *adapter = netdev_priv(netdev); > + > + switch (type) { > + case TC_SETUP_QDISC_TAPRIO: > + return tsnep_taprio(adapter, type_data); > + default: > + return -EOPNOTSUPP; > + } > +} > + > +int tsnep_tc_init(struct tsnep_adapter *adapter) > +{ > + if (!adapter->gate_control) > + return 0; > + > + /* open all gates */ > + iowrite8(TSNEP_GC_DISABLE, adapter->addr + TSNEP_GC); > + iowrite32(TSNEP_GC_OPEN | TSNEP_GC_NEXT_OPEN, adapter->addr + TSNEP_GC); > + > + adapter->gcl[0].addr = adapter->addr + TSNEP_GCL_A; > + adapter->gcl[1].addr = adapter->addr + TSNEP_GCL_B; > + > + return 0; > +} > + > +void tsnep_tc_cleanup(struct tsnep_adapter *adapter) > +{ > + if (!adapter->gate_control) > + return; > + > + if (adapter->gate_control_active) { > + iowrite8(TSNEP_GC_DISABLE, adapter->addr + TSNEP_GC); > + adapter->gate_control_active = false; > + } > +} > diff --git a/drivers/net/ethernet/engleder/tsnep_test.c b/drivers/net/ethernet/engleder/tsnep_test.c > new file mode 100644 > index 000000000000..1581d6b22232 > --- /dev/null > +++ b/drivers/net/ethernet/engleder/tsnep_test.c > @@ -0,0 +1,811 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* Copyright (C) 2021 Gerhard Engleder <gerhard@engleder-embedded.com> */ > + > +#include "tsnep.h" > + > +#include <net/pkt_sched.h> > + > +enum tsnep_test { > + TSNEP_TEST_ENABLE = 0, > + TSNEP_TEST_TAPRIO, > + TSNEP_TEST_TAPRIO_CHANGE, > + TSNEP_TEST_TAPRIO_EXTENSION, > +}; > + > +static const char tsnep_test_strings[][ETH_GSTRING_LEN] = { > + "Enable timeout (offline)", > + "TAPRIO (offline)", > + "TAPRIO change (offline)", > + "TAPRIO extension (offline)", > +}; > + > +#define TSNEP_TEST_COUNT (sizeof(tsnep_test_strings) / ETH_GSTRING_LEN) > + > +static bool enable_gc_timeout(struct tsnep_adapter *adapter) > +{ > + iowrite8(TSNEP_GC_ENABLE_TIMEOUT, adapter->addr + TSNEP_GC); > + if (!(ioread32(adapter->addr + TSNEP_GC) & TSNEP_GC_TIMEOUT_ACTIVE)) > + return false; > + > + return true; > +} > + > +static bool gc_timeout_signaled(struct tsnep_adapter *adapter) > +{ > + if (ioread32(adapter->addr + TSNEP_GC) & TSNEP_GC_TIMEOUT_SIGNAL) > + return true; > + > + return false; > +} > + > +static bool ack_gc_timeout(struct tsnep_adapter *adapter) > +{ > + iowrite8(TSNEP_GC_ENABLE_TIMEOUT, adapter->addr + TSNEP_GC); > + if (ioread32(adapter->addr + TSNEP_GC) & > + (TSNEP_GC_TIMEOUT_ACTIVE | TSNEP_GC_TIMEOUT_SIGNAL)) > + return false; > + return true; > +} > + > +static bool enable_gc(struct tsnep_adapter *adapter, bool a) > +{ > + u8 enable; > + u8 active; > + > + if (a) { > + enable = TSNEP_GC_ENABLE_A; > + active = TSNEP_GC_ACTIVE_A; > + } else { > + enable = TSNEP_GC_ENABLE_B; > + active = TSNEP_GC_ACTIVE_B; > + } > + > + iowrite8(enable, adapter->addr + TSNEP_GC); > + if (!(ioread32(adapter->addr + TSNEP_GC) & active)) > + return false; > + > + return true; > +} > + > +static bool disable_gc(struct tsnep_adapter *adapter) > +{ > + iowrite8(TSNEP_GC_DISABLE, adapter->addr + TSNEP_GC); > + if (ioread32(adapter->addr + TSNEP_GC) & > + (TSNEP_GC_ACTIVE_A | TSNEP_GC_ACTIVE_B)) > + return false; > + > + return true; > +} > + > +static bool gc_delayed_enable(struct tsnep_adapter *adapter, bool a, int delay) > +{ > + u64 before, after; > + u32 time; > + bool enabled; > + > + if (!disable_gc(adapter)) > + return false; > + > + before = ktime_get_ns(); > + > + if (!enable_gc_timeout(adapter)) > + return false; > + > + /* for start time after timeout, the timeout can guarantee, that enable > + * is blocked if too late > + */ > + time = ioread32(adapter->addr + ECM_SYSTEM_TIME_LOW); > + time += TSNEP_GC_TIMEOUT; > + iowrite32(time, adapter->addr + TSNEP_GC_TIME); > + > + ndelay(delay); > + > + enabled = enable_gc(adapter, a); > + after = ktime_get_ns(); > + > + if (delay > TSNEP_GC_TIMEOUT) { > + /* timeout must have blocked enable */ > + if (enabled) > + return false; > + } else if ((after - before) < TSNEP_GC_TIMEOUT * 14 / 16) { > + /* timeout must not have blocked enable */ > + if (!enabled) > + return false; > + } > + > + if (enabled) { > + if (gc_timeout_signaled(adapter)) > + return false; > + } else { > + if (!gc_timeout_signaled(adapter)) > + return false; > + if (!ack_gc_timeout(adapter)) > + return false; > + } > + > + if (!disable_gc(adapter)) > + return false; > + > + return true; > +} > + > +static bool tsnep_test_gc_enable(struct tsnep_adapter *adapter) > +{ > + int i; > + > + iowrite32(0x80000001, adapter->addr + TSNEP_GCL_A + 0); > + iowrite32(100000, adapter->addr + TSNEP_GCL_A + 4); > + > + for (i = 0; i < 200000; i += 100) { > + if (!gc_delayed_enable(adapter, true, i)) > + return false; > + } > + > + iowrite32(0x80000001, adapter->addr + TSNEP_GCL_B + 0); > + iowrite32(100000, adapter->addr + TSNEP_GCL_B + 4); > + > + for (i = 0; i < 200000; i += 100) { > + if (!gc_delayed_enable(adapter, false, i)) > + return false; > + } > + > + return true; > +} > + > +static void delay_base_time(struct tsnep_adapter *adapter, > + struct tc_taprio_qopt_offload *qopt, s64 ms) > +{ > + u64 system_time; > + u64 base_time = ktime_to_ns(qopt->base_time); > + u64 n; > + > + tsnep_get_system_time(adapter, &system_time); > + system_time += ms * 1000000; > + n = div64_u64(system_time - base_time, qopt->cycle_time); > + > + qopt->base_time = ktime_add_ns(qopt->base_time, > + (n + 1) * qopt->cycle_time); > +} > + > +static void get_gate_state(struct tsnep_adapter *adapter, u32 *gc, u32 *gc_time, > + u64 *system_time) > +{ > + u32 time_high_before; > + u32 time_low; > + u32 time_high; > + u32 gc_time_before; > + > + time_high = ioread32(adapter->addr + ECM_SYSTEM_TIME_HIGH); > + *gc_time = ioread32(adapter->addr + TSNEP_GC_TIME); > + do { > + time_low = ioread32(adapter->addr + ECM_SYSTEM_TIME_LOW); > + *gc = ioread32(adapter->addr + TSNEP_GC); > + > + gc_time_before = *gc_time; > + *gc_time = ioread32(adapter->addr + TSNEP_GC_TIME); > + time_high_before = time_high; > + time_high = ioread32(adapter->addr + ECM_SYSTEM_TIME_HIGH); > + } while ((time_high != time_high_before) || > + (*gc_time != gc_time_before)); > + > + *system_time = (((u64)time_high) << 32) | ((u64)time_low); > +} > + > +static int get_operation(struct tsnep_gcl *gcl, u64 system_time, u64 *next) > +{ > + u64 n = div64_u64(system_time - gcl->base_time, gcl->cycle_time); > + u64 cycle_start = gcl->base_time + gcl->cycle_time * n; > + int i; > + > + *next = cycle_start; > + for (i = 0; i < gcl->count; i++) { > + *next += gcl->operation[i].interval; > + if (*next > system_time) > + break; > + } > + > + return i; > +} > + > +static bool check_gate(struct tsnep_adapter *adapter) > +{ > + u32 gc_time; > + u32 gc; > + u64 system_time; > + struct tsnep_gcl *curr; > + struct tsnep_gcl *prev; > + u64 next_time; > + u8 gate_open; > + u8 next_gate_open; > + > + get_gate_state(adapter, &gc, &gc_time, &system_time); > + > + if (gc & TSNEP_GC_ACTIVE_A) { > + curr = &adapter->gcl[0]; > + prev = &adapter->gcl[1]; > + } else if (gc & TSNEP_GC_ACTIVE_B) { > + curr = &adapter->gcl[1]; > + prev = &adapter->gcl[0]; > + } else { > + return false; > + } > + if (curr->start_time <= system_time) { > + /* GCL is already active */ > + int index; > + > + index = get_operation(curr, system_time, &next_time); > + gate_open = curr->operation[index].properties & TSNEP_GCL_MASK; > + if (index == curr->count - 1) > + index = 0; > + else > + index++; > + next_gate_open = > + curr->operation[index].properties & TSNEP_GCL_MASK; > + } else if (curr->change) { > + /* operation of previous GCL is active */ > + int index; > + u64 start_before; > + u64 n; > + > + index = get_operation(prev, system_time, &next_time); > + next_time = curr->start_time; > + start_before = prev->base_time; > + n = div64_u64(curr->start_time - start_before, > + prev->cycle_time); > + start_before += n * prev->cycle_time; > + if (curr->start_time == start_before) > + start_before -= prev->cycle_time; > + if (((start_before + prev->cycle_time_extension) >= > + curr->start_time) && > + (curr->start_time - prev->cycle_time_extension <= > + system_time)) { > + /* extend */ > + index = prev->count - 1; > + } > + gate_open = prev->operation[index].properties & TSNEP_GCL_MASK; > + next_gate_open = > + curr->operation[0].properties & TSNEP_GCL_MASK; > + } else { > + /* GCL is waiting for start */ > + next_time = curr->start_time; > + gate_open = 0xFF; > + next_gate_open = curr->operation[0].properties & TSNEP_GCL_MASK; > + } > + > + if (gc_time != (next_time & 0xFFFFFFFF)) { > + dev_err(&adapter->pdev->dev, "gate control time 0x%x!=0x%llx\n", > + gc_time, next_time); > + return false; > + } > + if (((gc & TSNEP_GC_OPEN) >> TSNEP_GC_OPEN_SHIFT) != gate_open) { > + dev_err(&adapter->pdev->dev, > + "gate control open 0x%02x!=0x%02x\n", > + ((gc & TSNEP_GC_OPEN) >> TSNEP_GC_OPEN_SHIFT), > + gate_open); > + return false; > + } > + if (((gc & TSNEP_GC_NEXT_OPEN) >> TSNEP_GC_NEXT_OPEN_SHIFT) != > + next_gate_open) { > + dev_err(&adapter->pdev->dev, > + "gate control next open 0x%02x!=0x%02x\n", > + ((gc & TSNEP_GC_NEXT_OPEN) >> TSNEP_GC_NEXT_OPEN_SHIFT), > + next_gate_open); > + return false; > + } > + > + return true; > +} > + > +static bool check_gate_duration(struct tsnep_adapter *adapter, s64 ms) > +{ > + ktime_t start = ktime_get(); > + > + do { > + if (!check_gate(adapter)) > + return false; > + } while (ktime_ms_delta(ktime_get(), start) < ms); > + > + return true; > +} > + > +static bool enable_check_taprio(struct tsnep_adapter *adapter, > + struct tc_taprio_qopt_offload *qopt, s64 ms) > +{ > + int retval; > + > + retval = tsnep_tc_setup(adapter->netdev, TC_SETUP_QDISC_TAPRIO, qopt); > + if (retval) > + return false; > + > + if (!check_gate_duration(adapter, ms)) > + return false; > + > + return true; > +} > + > +static bool disable_taprio(struct tsnep_adapter *adapter) > +{ > + struct tc_taprio_qopt_offload qopt; > + int retval; > + > + memset(&qopt, 0, sizeof(qopt)); > + qopt.enable = 0; > + retval = tsnep_tc_setup(adapter->netdev, TC_SETUP_QDISC_TAPRIO, &qopt); > + if (retval) > + return false; > + > + return true; > +} > + > +static bool run_taprio(struct tsnep_adapter *adapter, > + struct tc_taprio_qopt_offload *qopt, s64 ms) > +{ > + if (!enable_check_taprio(adapter, qopt, ms)) > + return false; > + > + if (!disable_taprio(adapter)) > + return false; > + > + return true; > +} > + > +static bool tsnep_test_taprio(struct tsnep_adapter *adapter) > +{ > + struct tc_taprio_qopt_offload *qopt; > + int i; > + > + qopt = kzalloc(struct_size(qopt, entries, 255), GFP_KERNEL); > + if (!qopt) > + return false; > + for (i = 0; i < 255; i++) > + qopt->entries[i].command = TC_TAPRIO_CMD_SET_GATES; > + > + qopt->enable = 1; > + qopt->base_time = ktime_set(0, 0); > + qopt->cycle_time = 1500000; > + qopt->cycle_time_extension = 0; > + qopt->entries[0].gate_mask = 0x02; > + qopt->entries[0].interval = 200000; > + qopt->entries[1].gate_mask = 0x03; > + qopt->entries[1].interval = 800000; > + qopt->entries[2].gate_mask = 0x07; > + qopt->entries[2].interval = 240000; > + qopt->entries[3].gate_mask = 0x01; > + qopt->entries[3].interval = 80000; > + qopt->entries[4].gate_mask = 0x04; > + qopt->entries[4].interval = 70000; > + qopt->entries[5].gate_mask = 0x06; > + qopt->entries[5].interval = 60000; > + qopt->entries[6].gate_mask = 0x0F; > + qopt->entries[6].interval = 50000; > + qopt->num_entries = 7; > + if (!run_taprio(adapter, qopt, 100)) > + goto failed; > + > + qopt->enable = 1; > + qopt->base_time = ktime_set(0, 0); > + qopt->cycle_time = 411854; > + qopt->cycle_time_extension = 0; > + qopt->entries[0].gate_mask = 0x17; > + qopt->entries[0].interval = 23842; > + qopt->entries[1].gate_mask = 0x16; > + qopt->entries[1].interval = 13482; > + qopt->entries[2].gate_mask = 0x15; > + qopt->entries[2].interval = 49428; > + qopt->entries[3].gate_mask = 0x14; > + qopt->entries[3].interval = 38189; > + qopt->entries[4].gate_mask = 0x13; > + qopt->entries[4].interval = 92321; > + qopt->entries[5].gate_mask = 0x12; > + qopt->entries[5].interval = 71239; > + qopt->entries[6].gate_mask = 0x11; > + qopt->entries[6].interval = 69932; > + qopt->entries[7].gate_mask = 0x10; > + qopt->entries[7].interval = 53421; > + qopt->num_entries = 8; > + if (!run_taprio(adapter, qopt, 100)) > + goto failed; > + > + qopt->enable = 1; > + qopt->base_time = ktime_set(0, 0); > + delay_base_time(adapter, qopt, 12); > + qopt->cycle_time = 125000; > + qopt->cycle_time_extension = 0; > + qopt->entries[0].gate_mask = 0x27; > + qopt->entries[0].interval = 15000; > + qopt->entries[1].gate_mask = 0x26; > + qopt->entries[1].interval = 15000; > + qopt->entries[2].gate_mask = 0x25; > + qopt->entries[2].interval = 12500; > + qopt->entries[3].gate_mask = 0x24; > + qopt->entries[3].interval = 17500; > + qopt->entries[4].gate_mask = 0x23; > + qopt->entries[4].interval = 10000; > + qopt->entries[5].gate_mask = 0x22; > + qopt->entries[5].interval = 11000; > + qopt->entries[6].gate_mask = 0x21; > + qopt->entries[6].interval = 9000; > + qopt->entries[7].gate_mask = 0x20; > + qopt->entries[7].interval = 10000; > + qopt->entries[8].gate_mask = 0x20; > + qopt->entries[8].interval = 12500; > + qopt->entries[9].gate_mask = 0x20; > + qopt->entries[9].interval = 12500; > + qopt->num_entries = 10; > + if (!run_taprio(adapter, qopt, 100)) > + goto failed; > + > + kfree(qopt); > + > + return true; > + > +failed: > + disable_taprio(adapter); > + kfree(qopt); > + > + return false; > +} > + > +static bool tsnep_test_taprio_change(struct tsnep_adapter *adapter) > +{ > + struct tc_taprio_qopt_offload *qopt; > + int i; > + > + qopt = kzalloc(struct_size(qopt, entries, 255), GFP_KERNEL); > + if (!qopt) > + return false; > + for (i = 0; i < 255; i++) > + qopt->entries[i].command = TC_TAPRIO_CMD_SET_GATES; > + > + qopt->enable = 1; > + qopt->base_time = ktime_set(0, 0); > + qopt->cycle_time = 100000; > + qopt->cycle_time_extension = 0; > + qopt->entries[0].gate_mask = 0x30; > + qopt->entries[0].interval = 20000; > + qopt->entries[1].gate_mask = 0x31; > + qopt->entries[1].interval = 80000; > + qopt->num_entries = 2; > + if (!enable_check_taprio(adapter, qopt, 100)) > + goto failed; > + > + /* change to identical */ > + if (!enable_check_taprio(adapter, qopt, 100)) > + goto failed; > + delay_base_time(adapter, qopt, 17); > + if (!enable_check_taprio(adapter, qopt, 100)) > + goto failed; > + > + /* change to same cycle time */ > + qopt->base_time = ktime_set(0, 0); > + qopt->entries[0].gate_mask = 0x42; > + qopt->entries[1].gate_mask = 0x43; > + delay_base_time(adapter, qopt, 2); > + if (!enable_check_taprio(adapter, qopt, 100)) > + goto failed; > + qopt->base_time = ktime_set(0, 0); > + qopt->entries[0].gate_mask = 0x54; > + qopt->entries[0].interval = 33333; > + qopt->entries[1].gate_mask = 0x55; > + qopt->entries[1].interval = 66667; > + delay_base_time(adapter, qopt, 23); > + if (!enable_check_taprio(adapter, qopt, 100)) > + goto failed; > + qopt->base_time = ktime_set(0, 0); > + qopt->entries[0].gate_mask = 0x66; > + qopt->entries[0].interval = 50000; > + qopt->entries[1].gate_mask = 0x67; > + qopt->entries[1].interval = 25000; > + qopt->entries[2].gate_mask = 0x68; > + qopt->entries[2].interval = 25000; > + qopt->num_entries = 3; > + delay_base_time(adapter, qopt, 11); > + if (!enable_check_taprio(adapter, qopt, 100)) > + goto failed; > + > + /* change to multiple of cycle time */ > + qopt->base_time = ktime_set(0, 0); > + qopt->cycle_time = 200000; > + qopt->entries[0].gate_mask = 0x79; > + qopt->entries[0].interval = 50000; > + qopt->entries[1].gate_mask = 0x7A; > + qopt->entries[1].interval = 150000; > + qopt->num_entries = 2; > + delay_base_time(adapter, qopt, 11); > + if (!enable_check_taprio(adapter, qopt, 100)) > + goto failed; > + qopt->base_time = ktime_set(0, 0); > + qopt->cycle_time = 1000000; > + qopt->entries[0].gate_mask = 0x7B; > + qopt->entries[0].interval = 125000; > + qopt->entries[1].gate_mask = 0x7C; > + qopt->entries[1].interval = 250000; > + qopt->entries[2].gate_mask = 0x7D; > + qopt->entries[2].interval = 375000; > + qopt->entries[3].gate_mask = 0x7E; > + qopt->entries[3].interval = 250000; > + qopt->num_entries = 4; > + delay_base_time(adapter, qopt, 3); > + if (!enable_check_taprio(adapter, qopt, 100)) > + goto failed; > + > + /* change to shorter cycle time */ > + qopt->base_time = ktime_set(0, 0); > + qopt->cycle_time = 333333; > + qopt->entries[0].gate_mask = 0x8F; > + qopt->entries[0].interval = 166666; > + qopt->entries[1].gate_mask = 0x80; > + qopt->entries[1].interval = 166667; > + qopt->num_entries = 2; > + delay_base_time(adapter, qopt, 11); > + if (!enable_check_taprio(adapter, qopt, 100)) > + goto failed; > + qopt->base_time = ktime_set(0, 0); > + qopt->cycle_time = 62500; > + qopt->entries[0].gate_mask = 0x81; > + qopt->entries[0].interval = 31250; > + qopt->entries[1].gate_mask = 0x82; > + qopt->entries[1].interval = 15625; > + qopt->entries[2].gate_mask = 0x83; > + qopt->entries[2].interval = 15625; > + qopt->num_entries = 3; > + delay_base_time(adapter, qopt, 1); > + if (!enable_check_taprio(adapter, qopt, 100)) > + goto failed; > + > + /* change to longer cycle time */ > + qopt->base_time = ktime_set(0, 0); > + qopt->cycle_time = 400000; > + qopt->entries[0].gate_mask = 0x84; > + qopt->entries[0].interval = 100000; > + qopt->entries[1].gate_mask = 0x85; > + qopt->entries[1].interval = 100000; > + qopt->entries[2].gate_mask = 0x86; > + qopt->entries[2].interval = 100000; > + qopt->entries[3].gate_mask = 0x87; > + qopt->entries[3].interval = 100000; > + qopt->num_entries = 4; > + delay_base_time(adapter, qopt, 7); > + if (!enable_check_taprio(adapter, qopt, 100)) > + goto failed; > + qopt->base_time = ktime_set(0, 0); > + qopt->cycle_time = 1700000; > + qopt->entries[0].gate_mask = 0x88; > + qopt->entries[0].interval = 200000; > + qopt->entries[1].gate_mask = 0x89; > + qopt->entries[1].interval = 300000; > + qopt->entries[2].gate_mask = 0x8A; > + qopt->entries[2].interval = 600000; > + qopt->entries[3].gate_mask = 0x8B; > + qopt->entries[3].interval = 100000; > + qopt->entries[4].gate_mask = 0x8C; > + qopt->entries[4].interval = 500000; > + qopt->num_entries = 5; > + delay_base_time(adapter, qopt, 6); > + if (!enable_check_taprio(adapter, qopt, 100)) > + goto failed; > + > + if (!disable_taprio(adapter)) > + goto failed; > + > + kfree(qopt); > + > + return true; > + > +failed: > + disable_taprio(adapter); > + kfree(qopt); > + > + return false; > +} > + > +static bool tsnep_test_taprio_extension(struct tsnep_adapter *adapter) > +{ > + struct tc_taprio_qopt_offload *qopt; > + int i; > + > + qopt = kzalloc(struct_size(qopt, entries, 255), GFP_KERNEL); > + if (!qopt) > + return false; > + for (i = 0; i < 255; i++) > + qopt->entries[i].command = TC_TAPRIO_CMD_SET_GATES; > + > + qopt->enable = 1; > + qopt->base_time = ktime_set(0, 0); > + qopt->cycle_time = 100000; > + qopt->cycle_time_extension = 50000; > + qopt->entries[0].gate_mask = 0x90; > + qopt->entries[0].interval = 20000; > + qopt->entries[1].gate_mask = 0x91; > + qopt->entries[1].interval = 80000; > + qopt->num_entries = 2; > + if (!enable_check_taprio(adapter, qopt, 100)) > + goto failed; > + > + /* change to different phase */ > + qopt->base_time = ktime_set(0, 50000); > + qopt->entries[0].gate_mask = 0x92; > + qopt->entries[0].interval = 33000; > + qopt->entries[1].gate_mask = 0x93; > + qopt->entries[1].interval = 67000; > + qopt->num_entries = 2; > + delay_base_time(adapter, qopt, 2); > + if (!enable_check_taprio(adapter, qopt, 100)) > + goto failed; > + > + /* change to different phase and longer cycle time */ > + qopt->base_time = ktime_set(0, 0); > + qopt->cycle_time = 1000000; > + qopt->cycle_time_extension = 700000; > + qopt->entries[0].gate_mask = 0x94; > + qopt->entries[0].interval = 400000; > + qopt->entries[1].gate_mask = 0x95; > + qopt->entries[1].interval = 600000; > + qopt->num_entries = 2; > + delay_base_time(adapter, qopt, 7); > + if (!enable_check_taprio(adapter, qopt, 100)) > + goto failed; > + qopt->base_time = ktime_set(0, 700000); > + qopt->cycle_time = 2000000; > + qopt->cycle_time_extension = 1900000; > + qopt->entries[0].gate_mask = 0x96; > + qopt->entries[0].interval = 400000; > + qopt->entries[1].gate_mask = 0x97; > + qopt->entries[1].interval = 1600000; > + qopt->num_entries = 2; > + delay_base_time(adapter, qopt, 9); > + if (!enable_check_taprio(adapter, qopt, 100)) > + goto failed; > + > + /* change to different phase and shorter cycle time */ > + qopt->base_time = ktime_set(0, 0); > + qopt->cycle_time = 1500000; > + qopt->cycle_time_extension = 700000; > + qopt->entries[0].gate_mask = 0x98; > + qopt->entries[0].interval = 400000; > + qopt->entries[1].gate_mask = 0x99; > + qopt->entries[1].interval = 600000; > + qopt->entries[2].gate_mask = 0x9A; > + qopt->entries[2].interval = 500000; > + qopt->num_entries = 3; > + delay_base_time(adapter, qopt, 3); > + if (!enable_check_taprio(adapter, qopt, 100)) > + goto failed; > + qopt->base_time = ktime_set(0, 100000); > + qopt->cycle_time = 500000; > + qopt->cycle_time_extension = 300000; > + qopt->entries[0].gate_mask = 0x9B; > + qopt->entries[0].interval = 150000; > + qopt->entries[1].gate_mask = 0x9C; > + qopt->entries[1].interval = 350000; > + qopt->num_entries = 2; > + delay_base_time(adapter, qopt, 9); > + if (!enable_check_taprio(adapter, qopt, 100)) > + goto failed; > + > + /* change to different cycle time */ > + qopt->base_time = ktime_set(0, 0); > + qopt->cycle_time = 1000000; > + qopt->cycle_time_extension = 700000; > + qopt->entries[0].gate_mask = 0xAD; > + qopt->entries[0].interval = 400000; > + qopt->entries[1].gate_mask = 0xAE; > + qopt->entries[1].interval = 300000; > + qopt->entries[2].gate_mask = 0xAF; > + qopt->entries[2].interval = 300000; > + qopt->num_entries = 3; > + if (!enable_check_taprio(adapter, qopt, 100)) > + goto failed; > + qopt->base_time = ktime_set(0, 0); > + qopt->cycle_time = 400000; > + qopt->cycle_time_extension = 100000; > + qopt->entries[0].gate_mask = 0xA0; > + qopt->entries[0].interval = 200000; > + qopt->entries[1].gate_mask = 0xA1; > + qopt->entries[1].interval = 200000; > + qopt->num_entries = 2; > + delay_base_time(adapter, qopt, 19); > + if (!enable_check_taprio(adapter, qopt, 100)) > + goto failed; > + qopt->base_time = ktime_set(0, 0); > + qopt->cycle_time = 500000; > + qopt->cycle_time_extension = 499999; > + qopt->entries[0].gate_mask = 0xB2; > + qopt->entries[0].interval = 100000; > + qopt->entries[1].gate_mask = 0xB3; > + qopt->entries[1].interval = 100000; > + qopt->entries[2].gate_mask = 0xB4; > + qopt->entries[2].interval = 100000; > + qopt->entries[3].gate_mask = 0xB5; > + qopt->entries[3].interval = 200000; > + qopt->num_entries = 4; > + delay_base_time(adapter, qopt, 19); > + if (!enable_check_taprio(adapter, qopt, 100)) > + goto failed; > + qopt->base_time = ktime_set(0, 0); > + qopt->cycle_time = 6000000; > + qopt->cycle_time_extension = 5999999; > + qopt->entries[0].gate_mask = 0xC6; > + qopt->entries[0].interval = 1000000; > + qopt->entries[1].gate_mask = 0xC7; > + qopt->entries[1].interval = 1000000; > + qopt->entries[2].gate_mask = 0xC8; > + qopt->entries[2].interval = 1000000; > + qopt->entries[3].gate_mask = 0xC9; > + qopt->entries[3].interval = 1500000; > + qopt->entries[4].gate_mask = 0xCA; > + qopt->entries[4].interval = 1500000; > + qopt->num_entries = 5; > + delay_base_time(adapter, qopt, 1); > + if (!enable_check_taprio(adapter, qopt, 100)) > + goto failed; > + > + if (!disable_taprio(adapter)) > + goto failed; > + > + kfree(qopt); > + > + return true; > + > +failed: > + disable_taprio(adapter); > + kfree(qopt); > + > + return false; > +} > + > +int tsnep_ethtool_get_test_count(void) > +{ > + return TSNEP_TEST_COUNT; > +} > + > +void tsnep_ethtool_get_test_strings(u8 *data) > +{ > + memcpy(data, tsnep_test_strings, sizeof(tsnep_test_strings)); > +} > + > +void tsnep_ethtool_self_test(struct net_device *netdev, > + struct ethtool_test *eth_test, u64 *data) > +{ > + struct tsnep_adapter *adapter = netdev_priv(netdev); > + > + eth_test->len = TSNEP_TEST_COUNT; > + > + if (eth_test->flags != ETH_TEST_FL_OFFLINE) { > + /* no tests are done online */ > + data[TSNEP_TEST_ENABLE] = 0; > + data[TSNEP_TEST_TAPRIO] = 0; > + data[TSNEP_TEST_TAPRIO_CHANGE] = 0; > + data[TSNEP_TEST_TAPRIO_EXTENSION] = 0; > + > + return; > + } > + > + if (tsnep_test_gc_enable(adapter)) { > + data[TSNEP_TEST_ENABLE] = 0; > + } else { > + eth_test->flags |= ETH_TEST_FL_FAILED; > + data[TSNEP_TEST_ENABLE] = 1; > + } > + > + if (tsnep_test_taprio(adapter)) { > + data[TSNEP_TEST_TAPRIO] = 0; > + } else { > + eth_test->flags |= ETH_TEST_FL_FAILED; > + data[TSNEP_TEST_TAPRIO] = 1; > + } > + > + if (tsnep_test_taprio_change(adapter)) { > + data[TSNEP_TEST_TAPRIO_CHANGE] = 0; > + } else { > + eth_test->flags |= ETH_TEST_FL_FAILED; > + data[TSNEP_TEST_TAPRIO_CHANGE] = 1; > + } > + > + if (tsnep_test_taprio_extension(adapter)) { > + data[TSNEP_TEST_TAPRIO_EXTENSION] = 0; > + } else { > + eth_test->flags |= ETH_TEST_FL_FAILED; > + data[TSNEP_TEST_TAPRIO_EXTENSION] = 1; > + } > +} I liked these tests :-) Cheers, -- Vinicius ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH net-next v2 3/3] tsnep: Add TSN endpoint Ethernet MAC driver 2021-09-02 23:17 ` Vinicius Costa Gomes @ 2021-09-03 20:14 ` Gerhard Engleder 0 siblings, 0 replies; 16+ messages in thread From: Gerhard Engleder @ 2021-09-03 20:14 UTC (permalink / raw) To: Vinicius Costa Gomes Cc: David Miller, Jakub Kicinski, Andrew Lunn, netdev, devicetree > > The TSN endpoint Ethernet MAC is a FPGA based network device for > > real-time communication. > > > > It is integrated as Ethernet controller with ethtool and PTP support. > > For real-time communcation TC_SETUP_QDISC_TAPRIO is supported. > > > > Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> > > --- > > [...] > > > +static int tsnep_netdev_open(struct net_device *netdev) > > +{ > > + struct tsnep_adapter *adapter = netdev_priv(netdev); > > + void *addr; > > + int i; > > + int retval; > > + > > + retval = tsnep_phy_open(adapter); > > + if (retval) > > + return retval; > > + > > + for (i = 0; i < adapter->num_tx_queues; i++) { > > + addr = adapter->addr + TSNEP_QUEUE(i); > > + retval = tsnep_tx_open(adapter, &adapter->tx[i], addr); > > + if (retval) > > + goto tx_failed; > > + } > > + retval = netif_set_real_num_tx_queues(adapter->netdev, > > + adapter->num_tx_queues); > > + if (retval) > > + goto tx_failed; > > + for (i = 0; i < adapter->num_rx_queues; i++) { > > + addr = adapter->addr + TSNEP_QUEUE(i); > > + retval = tsnep_rx_open(adapter, &adapter->rx[i], addr); > > + if (retval) > > + goto rx_failed; > > + } > > + retval = netif_set_real_num_rx_queues(adapter->netdev, > > + adapter->num_rx_queues); > > + if (retval) > > + goto rx_failed; > > + > > + netif_napi_add(adapter->netdev, &adapter->napi, tsnep_rx_napi_poll, 64); > > I know that you only have support for 1 queue for now. But having > "tx[0]" and "rx[0]" hardcoded in tsnep_rx_napi_poll() seems less than > ideal if you want to support more queues in the future. > > And I think that moving 'struct napi_struct' to be closer to the queues > now will help make that future transition to multiqueue to be cleaner. You are right, I will try to make it more multiqueue aware for future transition. > > +void tsnep_ethtool_self_test(struct net_device *netdev, > > + struct ethtool_test *eth_test, u64 *data) > > +{ > > + struct tsnep_adapter *adapter = netdev_priv(netdev); > > + > > + eth_test->len = TSNEP_TEST_COUNT; > > + > > + if (eth_test->flags != ETH_TEST_FL_OFFLINE) { > > + /* no tests are done online */ > > + data[TSNEP_TEST_ENABLE] = 0; > > + data[TSNEP_TEST_TAPRIO] = 0; > > + data[TSNEP_TEST_TAPRIO_CHANGE] = 0; > > + data[TSNEP_TEST_TAPRIO_EXTENSION] = 0; > > + > > + return; > > + } > > + > > + if (tsnep_test_gc_enable(adapter)) { > > + data[TSNEP_TEST_ENABLE] = 0; > > + } else { > > + eth_test->flags |= ETH_TEST_FL_FAILED; > > + data[TSNEP_TEST_ENABLE] = 1; > > + } > > + > > + if (tsnep_test_taprio(adapter)) { > > + data[TSNEP_TEST_TAPRIO] = 0; > > + } else { > > + eth_test->flags |= ETH_TEST_FL_FAILED; > > + data[TSNEP_TEST_TAPRIO] = 1; > > + } > > + > > + if (tsnep_test_taprio_change(adapter)) { > > + data[TSNEP_TEST_TAPRIO_CHANGE] = 0; > > + } else { > > + eth_test->flags |= ETH_TEST_FL_FAILED; > > + data[TSNEP_TEST_TAPRIO_CHANGE] = 1; > > + } > > + > > + if (tsnep_test_taprio_extension(adapter)) { > > + data[TSNEP_TEST_TAPRIO_EXTENSION] = 0; > > + } else { > > + eth_test->flags |= ETH_TEST_FL_FAILED; > > + data[TSNEP_TEST_TAPRIO_EXTENSION] = 1; > > + } > > +} > > I liked these tests :-) Thank you! TAPRIO/IEEE802.1Qbv support was challenging for me and these tests helped me a lot. My goal was hardware support reduced to the minimum and error prone calculation/switching stuff done by software. Gerhard ^ permalink raw reply [flat|nested] 16+ messages in thread
end of thread, other threads:[~2021-09-24 19:35 UTC | newest] Thread overview: 16+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2021-08-31 19:34 [PATCH net-next v2 0/3] TSN endpoint Ethernet MAC driver Gerhard Engleder 2021-08-31 19:34 ` [PATCH net-next v2 1/3] dt-bindings: Add vendor prefix for Engleder Gerhard Engleder 2021-09-01 12:32 ` Rob Herring 2021-08-31 19:34 ` [PATCH net-next v2 2/3] dt-bindings: net: Add tsnep Ethernet controller Gerhard Engleder 2021-09-01 12:33 ` Rob Herring 2021-08-31 19:34 ` [PATCH net-next v2 3/3] tsnep: Add TSN endpoint Ethernet MAC driver Gerhard Engleder 2021-08-31 21:55 ` Andrew Lunn 2021-09-01 20:18 ` Gerhard Engleder 2021-09-01 21:01 ` Andrew Lunn 2021-09-02 20:32 ` Gerhard Engleder 2021-09-02 21:21 ` Andrew Lunn 2021-09-03 19:53 ` Gerhard Engleder 2021-09-24 19:35 ` Gerhard Engleder 2021-08-31 23:12 ` kernel test robot 2021-09-02 23:17 ` Vinicius Costa Gomes 2021-09-03 20:14 ` Gerhard Engleder
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).