* [BUG] selftests/net: test_vxlan_mdb.sh: 84 out of 642 tests [FAIL]
@ 2024-03-16 23:19 Mirsad Todorovac
2024-03-18 3:35 ` Hangbin Liu
0 siblings, 1 reply; 8+ messages in thread
From: Mirsad Todorovac @ 2024-03-16 23:19 UTC (permalink / raw)
To: netdev
Cc: David S. Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
Shuah Khan, linux-kselftest, linux-kernel, Ido Schimmel,
Hangbin Liu
[-- Attachment #1: Type: text/plain, Size: 7281 bytes --]
Hi,
While running kselftest on vanilla torvalds tree kernel commit v6.8-11167-g4438a810f396,
the test suite reported a number of errors.
I was using the latest iproute2-next suite on an Ubuntu 22.04 LTS box.
# Tests passed: 558
# Tests failed: 84
not ok 90 selftests: net: test_vxlan_mdb.sh # exit=1
495:# TEST: Destination IP - match [FAIL]
496:# TEST: Destination IP - no match [FAIL]
497:# TEST: Default destination port - match [FAIL]
498:# TEST: Default destination port - no match [FAIL]
499:# TEST: Non-default destination port - match [FAIL]
500:# TEST: Non-default destination port - no match [FAIL]
501:# TEST: Default destination VNI - match [FAIL]
502:# TEST: Default destination VNI - no match [FAIL]
503:# TEST: Non-default destination VNI - match [FAIL]
504:# TEST: Non-default destination VNI - no match [FAIL]
521:# TEST: Destination IP - match [FAIL]
522:# TEST: Destination IP - no match [FAIL]
523:# TEST: Default destination port - match [FAIL]
524:# TEST: Default destination port - no match [FAIL]
525:# TEST: Non-default destination port - match [FAIL]
526:# TEST: Non-default destination port - no match [FAIL]
527:# TEST: Default destination VNI - match [FAIL]
528:# TEST: Default destination VNI - no match [FAIL]
529:# TEST: Non-default destination VNI - match [FAIL]
530:# TEST: Non-default destination VNI - no match [FAIL]
549:# TEST: Forward valid source - first VTEP [FAIL]
550:# TEST: Forward valid source - second VTEP [FAIL]
551:# TEST: Block excluded source after removal - first VTEP [FAIL]
552:# TEST: Block excluded source after removal - second VTEP [FAIL]
553:# TEST: Forward valid source after removal - first VTEP [FAIL]
554:# TEST: Forward valid source after removal - second VTEP [FAIL]
571:# TEST: Forward valid source - first VTEP [FAIL]
572:# TEST: Forward valid source - second VTEP [FAIL]
573:# TEST: Block excluded source after removal - first VTEP [FAIL]
574:# TEST: Block excluded source after removal - second VTEP [FAIL]
575:# TEST: Forward valid source after removal - first VTEP [FAIL]
576:# TEST: Forward valid source after removal - second VTEP [FAIL]
593:# TEST: Forward valid source - first VTEP [FAIL]
594:# TEST: Forward valid source - second VTEP [FAIL]
595:# TEST: Block excluded source after removal - first VTEP [FAIL]
596:# TEST: Block excluded source after removal - second VTEP [FAIL]
597:# TEST: Forward valid source after removal - first VTEP [FAIL]
598:# TEST: Forward valid source after removal - second VTEP [FAIL]
615:# TEST: Forward valid source - first VTEP [FAIL]
616:# TEST: Forward valid source - second VTEP [FAIL]
617:# TEST: Block excluded source after removal - first VTEP [FAIL]
618:# TEST: Block excluded source after removal - second VTEP [FAIL]
619:# TEST: Forward valid source after removal - first VTEP [FAIL]
620:# TEST: Forward valid source after removal - second VTEP [FAIL]
636:# TEST: Forward valid source [FAIL]
637:# TEST: Receive of valid source after removal from group [FAIL]
648:# TEST: Forward valid source [FAIL]
649:# TEST: Receive of valid source after removal from group [FAIL]
660:# TEST: Forward valid source [FAIL]
661:# TEST: Receive of valid source after removal from group [FAIL]
672:# TEST: Forward valid source [FAIL]
673:# TEST: Receive of valid source after removal from group [FAIL]
683:# TEST: Egress VNI translation - PVID configured [FAIL]
684:# TEST: Egress VNI translation - no PVID configured [FAIL]
685:# TEST: Egress VNI translation - PVID reconfigured [FAIL]
695:# TEST: Egress VNI translation - PVID configured [FAIL]
696:# TEST: Egress VNI translation - no PVID configured [FAIL]
697:# TEST: Egress VNI translation - PVID reconfigured [FAIL]
707:# TEST: Registered IPv4 multicast - first VTEP [FAIL]
709:# TEST: Unregistered IPv4 multicast - first VTEP [FAIL]
710:# TEST: Unregistered IPv4 multicast - second VTEP [FAIL]
711:# TEST: Link-local IPv4 multicast - first VTEP [FAIL]
712:# TEST: Link-local IPv4 multicast - second VTEP [FAIL]
713:# TEST: Registered IPv4 multicast with a unicast MAC - first VTEP [FAIL]
714:# TEST: Registered IPv4 multicast with a unicast MAC - second VTEP [FAIL]
715:# TEST: Registered IPv4 multicast with a broadcast MAC - first VTEP [FAIL]
716:# TEST: Registered IPv4 multicast with a broadcast MAC - second VTEP [FAIL]
734:# TEST: Registered IPv4 multicast - first VTEP [FAIL]
736:# TEST: Unregistered IPv4 multicast - first VTEP [FAIL]
737:# TEST: Unregistered IPv4 multicast - second VTEP [FAIL]
738:# TEST: Link-local IPv4 multicast - first VTEP [FAIL]
739:# TEST: Link-local IPv4 multicast - second VTEP [FAIL]
740:# TEST: Registered IPv4 multicast with a unicast MAC - first VTEP [FAIL]
741:# TEST: Registered IPv4 multicast with a unicast MAC - second VTEP [FAIL]
742:# TEST: Registered IPv4 multicast with a broadcast MAC - first VTEP [FAIL]
743:# TEST: Registered IPv4 multicast with a broadcast MAC - second VTEP [FAIL]
761:# TEST: IP multicast - first VTEP [FAIL]
763:# TEST: Broadcast - first VTEP [FAIL]
765:# TEST: IP multicast after removal - first VTEP [FAIL]
766:# TEST: IP multicast after removal - second VTEP [FAIL]
779:# TEST: IP multicast - first VTEP [FAIL]
781:# TEST: Broadcast - first VTEP [FAIL]
783:# TEST: IP multicast after removal - first VTEP [FAIL]
784:# TEST: IP multicast after removal - second VTEP [FAIL]
The problem is present at least since 6.8-rc7.
Please find attached the config and the full output of test_vxlan_mdb.sh.
Hope this helps.
Best regards,
Mirsad Todorovac
[-- Attachment #2: config-6.8.0-torv-11167-g4438a810f396-dirty.xz --]
[-- Type: application/x-xz, Size: 59616 bytes --]
[-- Attachment #3: test_vxlan_mdb.sh.log --]
[-- Type: text/x-log, Size: 56826 bytes --]
# timeout set to 3600
# selftests: net: test_vxlan_mdb.sh
#
# Control path: Basic (*, G) operations - IPv4 overlay / IPv4 underlay
# --------------------------------------------------------------------
# TEST: MDB entry addition [ OK ]
# TEST: MDB entry presence after addition [ OK ]
# TEST: MDB entry replacement [ OK ]
# TEST: MDB entry presence after replacement [ OK ]
# TEST: MDB entry deletion [ OK ]
# TEST: MDB entry presence after deletion [ OK ]
# TEST: Non-existent MDB entry deletion [ OK ]
# TEST: MDB entry default protocol [ OK ]
# TEST: MDB entry protocol replacement [ OK ]
# TEST: MDB entry default destination port [ OK ]
# TEST: MDB entry destination port replacement [ OK ]
# TEST: MDB entry default destination VNI [ OK ]
# TEST: MDB entry destination VNI replacement [ OK ]
# TEST: MDB entry default outgoing interface [ OK ]
# TEST: MDB entry outgoing interface replacement [ OK ]
# TEST: MDB entry with mismatch between device and port [ OK ]
# TEST: MDB entry with temp state [ OK ]
# TEST: MDB entry with VLAN [ OK ]
# TEST: MDB entry MAC address [ OK ]
# TEST: MDB entry without extended parameters [ OK ]
# TEST: MDB entry with an invalid protocol [ OK ]
# TEST: MDB entry with an invalid destination VNI [ OK ]
# TEST: MDB entry with an invalid source VNI [ OK ]
# TEST: MDB entry without a remote destination IP [ OK ]
# TEST: Duplicate MDB entries [ OK ]
#
# Control path: Basic (*, G) operations - IPv6 overlay / IPv4 underlay
# --------------------------------------------------------------------
# TEST: MDB entry addition [ OK ]
# TEST: MDB entry presence after addition [ OK ]
# TEST: MDB entry replacement [ OK ]
# TEST: MDB entry presence after replacement [ OK ]
# TEST: MDB entry deletion [ OK ]
# TEST: MDB entry presence after deletion [ OK ]
# TEST: Non-existent MDB entry deletion [ OK ]
# TEST: MDB entry default protocol [ OK ]
# TEST: MDB entry protocol replacement [ OK ]
# TEST: MDB entry default destination port [ OK ]
# TEST: MDB entry destination port replacement [ OK ]
# TEST: MDB entry default destination VNI [ OK ]
# TEST: MDB entry destination VNI replacement [ OK ]
# TEST: MDB entry default outgoing interface [ OK ]
# TEST: MDB entry outgoing interface replacement [ OK ]
# TEST: MDB entry with mismatch between device and port [ OK ]
# TEST: MDB entry with temp state [ OK ]
# TEST: MDB entry with VLAN [ OK ]
# TEST: MDB entry MAC address [ OK ]
# TEST: MDB entry without extended parameters [ OK ]
# TEST: MDB entry with an invalid protocol [ OK ]
# TEST: MDB entry with an invalid destination VNI [ OK ]
# TEST: MDB entry with an invalid source VNI [ OK ]
# TEST: MDB entry without a remote destination IP [ OK ]
# TEST: Duplicate MDB entries [ OK ]
#
# Control path: Basic (*, G) operations - IPv4 overlay / IPv6 underlay
# --------------------------------------------------------------------
# TEST: MDB entry addition [ OK ]
# TEST: MDB entry presence after addition [ OK ]
# TEST: MDB entry replacement [ OK ]
# TEST: MDB entry presence after replacement [ OK ]
# TEST: MDB entry deletion [ OK ]
# TEST: MDB entry presence after deletion [ OK ]
# TEST: Non-existent MDB entry deletion [ OK ]
# TEST: MDB entry default protocol [ OK ]
# TEST: MDB entry protocol replacement [ OK ]
# TEST: MDB entry default destination port [ OK ]
# TEST: MDB entry destination port replacement [ OK ]
# TEST: MDB entry default destination VNI [ OK ]
# TEST: MDB entry destination VNI replacement [ OK ]
# TEST: MDB entry default outgoing interface [ OK ]
# TEST: MDB entry outgoing interface replacement [ OK ]
# TEST: MDB entry with mismatch between device and port [ OK ]
# TEST: MDB entry with temp state [ OK ]
# TEST: MDB entry with VLAN [ OK ]
# TEST: MDB entry MAC address [ OK ]
# TEST: MDB entry without extended parameters [ OK ]
# TEST: MDB entry with an invalid protocol [ OK ]
# TEST: MDB entry with an invalid destination VNI [ OK ]
# TEST: MDB entry with an invalid source VNI [ OK ]
# TEST: MDB entry without a remote destination IP [ OK ]
# TEST: Duplicate MDB entries [ OK ]
#
# Control path: Basic (*, G) operations - IPv6 overlay / IPv6 underlay
# --------------------------------------------------------------------
# TEST: MDB entry addition [ OK ]
# TEST: MDB entry presence after addition [ OK ]
# TEST: MDB entry replacement [ OK ]
# TEST: MDB entry presence after replacement [ OK ]
# TEST: MDB entry deletion [ OK ]
# TEST: MDB entry presence after deletion [ OK ]
# TEST: Non-existent MDB entry deletion [ OK ]
# TEST: MDB entry default protocol [ OK ]
# TEST: MDB entry protocol replacement [ OK ]
# TEST: MDB entry default destination port [ OK ]
# TEST: MDB entry destination port replacement [ OK ]
# TEST: MDB entry default destination VNI [ OK ]
# TEST: MDB entry destination VNI replacement [ OK ]
# TEST: MDB entry default outgoing interface [ OK ]
# TEST: MDB entry outgoing interface replacement [ OK ]
# TEST: MDB entry with mismatch between device and port [ OK ]
# TEST: MDB entry with temp state [ OK ]
# TEST: MDB entry with VLAN [ OK ]
# TEST: MDB entry MAC address [ OK ]
# TEST: MDB entry without extended parameters [ OK ]
# TEST: MDB entry with an invalid protocol [ OK ]
# TEST: MDB entry with an invalid destination VNI [ OK ]
# TEST: MDB entry with an invalid source VNI [ OK ]
# TEST: MDB entry without a remote destination IP [ OK ]
# TEST: Duplicate MDB entries [ OK ]
#
# Control path: Basic (S, G) operations - IPv4 overlay / IPv4 underlay
# --------------------------------------------------------------------
# TEST: MDB entry addition [ OK ]
# TEST: MDB entry presence after addition [ OK ]
# TEST: MDB entry replacement [ OK ]
# TEST: MDB entry presence after replacement [ OK ]
# TEST: MDB entry deletion [ OK ]
# TEST: MDB entry presence after deletion [ OK ]
# TEST: Non-existent MDB entry deletion [ OK ]
# TEST: MDB entry default protocol [ OK ]
# TEST: MDB entry protocol replacement [ OK ]
# TEST: MDB entry default destination port [ OK ]
# TEST: MDB entry destination port replacement [ OK ]
# TEST: MDB entry default destination VNI [ OK ]
# TEST: MDB entry destination VNI replacement [ OK ]
# TEST: MDB entry default outgoing interface [ OK ]
# TEST: MDB entry outgoing interface replacement [ OK ]
# TEST: MDB entry with mismatch between device and port [ OK ]
# TEST: MDB entry with temp state [ OK ]
# TEST: MDB entry with VLAN [ OK ]
# TEST: MDB entry MAC address [ OK ]
# TEST: MDB entry without extended parameters [ OK ]
# TEST: MDB entry with an invalid protocol [ OK ]
# TEST: MDB entry with an invalid destination VNI [ OK ]
# TEST: MDB entry with an invalid source VNI [ OK ]
# TEST: MDB entry without a remote destination IP [ OK ]
# TEST: Duplicate MDB entries [ OK ]
#
# Control path: Basic (S, G) operations - IPv6 overlay / IPv4 underlay
# ---------------------------------------------------------------------
# TEST: MDB entry addition [ OK ]
# TEST: MDB entry presence after addition [ OK ]
# TEST: MDB entry replacement [ OK ]
# TEST: MDB entry presence after replacement [ OK ]
# TEST: MDB entry deletion [ OK ]
# TEST: MDB entry presence after deletion [ OK ]
# TEST: Non-existent MDB entry deletion [ OK ]
# TEST: MDB entry default protocol [ OK ]
# TEST: MDB entry protocol replacement [ OK ]
# TEST: MDB entry default destination port [ OK ]
# TEST: MDB entry destination port replacement [ OK ]
# TEST: MDB entry default destination VNI [ OK ]
# TEST: MDB entry destination VNI replacement [ OK ]
# TEST: MDB entry default outgoing interface [ OK ]
# TEST: MDB entry outgoing interface replacement [ OK ]
# TEST: MDB entry with mismatch between device and port [ OK ]
# TEST: MDB entry with temp state [ OK ]
# TEST: MDB entry with VLAN [ OK ]
# TEST: MDB entry MAC address [ OK ]
# TEST: MDB entry without extended parameters [ OK ]
# TEST: MDB entry with an invalid protocol [ OK ]
# TEST: MDB entry with an invalid destination VNI [ OK ]
# TEST: MDB entry with an invalid source VNI [ OK ]
# TEST: MDB entry without a remote destination IP [ OK ]
# TEST: Duplicate MDB entries [ OK ]
#
# Control path: Basic (S, G) operations - IPv4 overlay / IPv6 underlay
# --------------------------------------------------------------------
# TEST: MDB entry addition [ OK ]
# TEST: MDB entry presence after addition [ OK ]
# TEST: MDB entry replacement [ OK ]
# TEST: MDB entry presence after replacement [ OK ]
# TEST: MDB entry deletion [ OK ]
# TEST: MDB entry presence after deletion [ OK ]
# TEST: Non-existent MDB entry deletion [ OK ]
# TEST: MDB entry default protocol [ OK ]
# TEST: MDB entry protocol replacement [ OK ]
# TEST: MDB entry default destination port [ OK ]
# TEST: MDB entry destination port replacement [ OK ]
# TEST: MDB entry default destination VNI [ OK ]
# TEST: MDB entry destination VNI replacement [ OK ]
# TEST: MDB entry default outgoing interface [ OK ]
# TEST: MDB entry outgoing interface replacement [ OK ]
# TEST: MDB entry with mismatch between device and port [ OK ]
# TEST: MDB entry with temp state [ OK ]
# TEST: MDB entry with VLAN [ OK ]
# TEST: MDB entry MAC address [ OK ]
# TEST: MDB entry without extended parameters [ OK ]
# TEST: MDB entry with an invalid protocol [ OK ]
# TEST: MDB entry with an invalid destination VNI [ OK ]
# TEST: MDB entry with an invalid source VNI [ OK ]
# TEST: MDB entry without a remote destination IP [ OK ]
# TEST: Duplicate MDB entries [ OK ]
#
# Control path: Basic (S, G) operations - IPv6 overlay / IPv6 underlay
# --------------------------------------------------------------------
# TEST: MDB entry addition [ OK ]
# TEST: MDB entry presence after addition [ OK ]
# TEST: MDB entry replacement [ OK ]
# TEST: MDB entry presence after replacement [ OK ]
# TEST: MDB entry deletion [ OK ]
# TEST: MDB entry presence after deletion [ OK ]
# TEST: Non-existent MDB entry deletion [ OK ]
# TEST: MDB entry default protocol [ OK ]
# TEST: MDB entry protocol replacement [ OK ]
# TEST: MDB entry default destination port [ OK ]
# TEST: MDB entry destination port replacement [ OK ]
# TEST: MDB entry default destination VNI [ OK ]
# TEST: MDB entry destination VNI replacement [ OK ]
# TEST: MDB entry default outgoing interface [ OK ]
# TEST: MDB entry outgoing interface replacement [ OK ]
# TEST: MDB entry with mismatch between device and port [ OK ]
# TEST: MDB entry with temp state [ OK ]
# TEST: MDB entry with VLAN [ OK ]
# TEST: MDB entry MAC address [ OK ]
# TEST: MDB entry without extended parameters [ OK ]
# TEST: MDB entry with an invalid protocol [ OK ]
# TEST: MDB entry with an invalid destination VNI [ OK ]
# TEST: MDB entry with an invalid source VNI [ OK ]
# TEST: MDB entry without a remote destination IP [ OK ]
# TEST: Duplicate MDB entries [ OK ]
#
# Control path: (*, G) operations - IPv4 overlay / IPv4 underlay
# --------------------------------------------------------------
# TEST: (*, G) MDB entry addition with source list [ OK ]
# TEST: (*, G) MDB entry presence after addition [ OK ]
# TEST: (S, G) MDB entry presence after addition [ OK ]
# TEST: (*, G) MDB entry replacement with source list [ OK ]
# TEST: (*, G) MDB entry presence after replacement [ OK ]
# TEST: (S, G) MDB entry presence after replacement [ OK ]
# TEST: (*, G) MDB entry deletion [ OK ]
# TEST: (*, G) MDB entry presence after deletion [ OK ]
# TEST: (S, G) MDB entry presence after deletion [ OK ]
# TEST: (*, G) MDB entry default filter mode [ OK ]
# TEST: (*, G) MDB entry after replacing filter mode to "include" [ OK ]
# TEST: (S, G) MDB entry after replacing filter mode to "include" [ OK ]
# TEST: "blocked" flag after replacing filter mode to "include" [ OK ]
# TEST: (*, G) MDB entry after replacing filter mode to "exclude" [ OK ]
# TEST: (S, G) MDB entry after replacing filter mode to "exclude" [ OK ]
# TEST: "blocked" flag after replacing filter mode to "exclude" [ OK ]
# TEST: (*, G) MDB entry default source list [ OK ]
# TEST: (S, G) MDB entry of 1st source after replacing source list [ OK ]
# TEST: (S, G) MDB entry of 2nd source after replacing source list [ OK ]
# TEST: (S, G) MDB entry of 3rd source after replacing source list [ OK ]
# TEST: (S, G) MDB entry of 1st source after removing source [ OK ]
# TEST: (S, G) MDB entry of 2nd source after removing source [ OK ]
# TEST: (S, G) MDB entry of 3rd source after removing source [ OK ]
# TEST: (*, G) MDB entry default protocol [ OK ]
# TEST: (S, G) MDB entry default protocol [ OK ]
# TEST: (*, G) MDB entry protocol after replacement [ OK ]
# TEST: (S, G) MDB entry protocol after replacement [ OK ]
# TEST: (*, G) MDB entry default destination port [ OK ]
# TEST: (S, G) MDB entry default destination port [ OK ]
# TEST: (*, G) MDB entry destination port after replacement [ OK ]
# TEST: (S, G) MDB entry destination port after replacement [ OK ]
# TEST: (*, G) MDB entry default destination VNI [ OK ]
# TEST: (S, G) MDB entry default destination VNI [ OK ]
# TEST: (*, G) MDB entry destination VNI after replacement [ OK ]
# TEST: (S, G) MDB entry destination VNI after replacement [ OK ]
# TEST: (*, G) MDB entry default outgoing interface [ OK ]
# TEST: (S, G) MDB entry default outgoing interface [ OK ]
# TEST: (*, G) MDB entry outgoing interface after replacement [ OK ]
# TEST: (S, G) MDB entry outgoing interface after replacement [ OK ]
# TEST: All-zeros group with filter mode [ OK ]
# TEST: All-zeros group with source list [ OK ]
# TEST: (*, G) INCLUDE with an empty source list [ OK ]
# TEST: Invalid source in source list [ OK ]
# TEST: Source list without filter mode [ OK ]
#
# Control path: (*, G) operations - IPv6 overlay / IPv4 underlay
# --------------------------------------------------------------
# TEST: (*, G) MDB entry addition with source list [ OK ]
# TEST: (*, G) MDB entry presence after addition [ OK ]
# TEST: (S, G) MDB entry presence after addition [ OK ]
# TEST: (*, G) MDB entry replacement with source list [ OK ]
# TEST: (*, G) MDB entry presence after replacement [ OK ]
# TEST: (S, G) MDB entry presence after replacement [ OK ]
# TEST: (*, G) MDB entry deletion [ OK ]
# TEST: (*, G) MDB entry presence after deletion [ OK ]
# TEST: (S, G) MDB entry presence after deletion [ OK ]
# TEST: (*, G) MDB entry default filter mode [ OK ]
# TEST: (*, G) MDB entry after replacing filter mode to "include" [ OK ]
# TEST: (S, G) MDB entry after replacing filter mode to "include" [ OK ]
# TEST: "blocked" flag after replacing filter mode to "include" [ OK ]
# TEST: (*, G) MDB entry after replacing filter mode to "exclude" [ OK ]
# TEST: (S, G) MDB entry after replacing filter mode to "exclude" [ OK ]
# TEST: "blocked" flag after replacing filter mode to "exclude" [ OK ]
# TEST: (*, G) MDB entry default source list [ OK ]
# TEST: (S, G) MDB entry of 1st source after replacing source list [ OK ]
# TEST: (S, G) MDB entry of 2nd source after replacing source list [ OK ]
# TEST: (S, G) MDB entry of 3rd source after replacing source list [ OK ]
# TEST: (S, G) MDB entry of 1st source after removing source [ OK ]
# TEST: (S, G) MDB entry of 2nd source after removing source [ OK ]
# TEST: (S, G) MDB entry of 3rd source after removing source [ OK ]
# TEST: (*, G) MDB entry default protocol [ OK ]
# TEST: (S, G) MDB entry default protocol [ OK ]
# TEST: (*, G) MDB entry protocol after replacement [ OK ]
# TEST: (S, G) MDB entry protocol after replacement [ OK ]
# TEST: (*, G) MDB entry default destination port [ OK ]
# TEST: (S, G) MDB entry default destination port [ OK ]
# TEST: (*, G) MDB entry destination port after replacement [ OK ]
# TEST: (S, G) MDB entry destination port after replacement [ OK ]
# TEST: (*, G) MDB entry default destination VNI [ OK ]
# TEST: (S, G) MDB entry default destination VNI [ OK ]
# TEST: (*, G) MDB entry destination VNI after replacement [ OK ]
# TEST: (S, G) MDB entry destination VNI after replacement [ OK ]
# TEST: (*, G) MDB entry default outgoing interface [ OK ]
# TEST: (S, G) MDB entry default outgoing interface [ OK ]
# TEST: (*, G) MDB entry outgoing interface after replacement [ OK ]
# TEST: (S, G) MDB entry outgoing interface after replacement [ OK ]
# TEST: All-zeros group with filter mode [ OK ]
# TEST: All-zeros group with source list [ OK ]
# TEST: (*, G) INCLUDE with an empty source list [ OK ]
# TEST: Invalid source in source list [ OK ]
# TEST: Source list without filter mode [ OK ]
#
# Control path: (*, G) operations - IPv4 overlay / IPv6 underlay
# --------------------------------------------------------------
# TEST: (*, G) MDB entry addition with source list [ OK ]
# TEST: (*, G) MDB entry presence after addition [ OK ]
# TEST: (S, G) MDB entry presence after addition [ OK ]
# TEST: (*, G) MDB entry replacement with source list [ OK ]
# TEST: (*, G) MDB entry presence after replacement [ OK ]
# TEST: (S, G) MDB entry presence after replacement [ OK ]
# TEST: (*, G) MDB entry deletion [ OK ]
# TEST: (*, G) MDB entry presence after deletion [ OK ]
# TEST: (S, G) MDB entry presence after deletion [ OK ]
# TEST: (*, G) MDB entry default filter mode [ OK ]
# TEST: (*, G) MDB entry after replacing filter mode to "include" [ OK ]
# TEST: (S, G) MDB entry after replacing filter mode to "include" [ OK ]
# TEST: "blocked" flag after replacing filter mode to "include" [ OK ]
# TEST: (*, G) MDB entry after replacing filter mode to "exclude" [ OK ]
# TEST: (S, G) MDB entry after replacing filter mode to "exclude" [ OK ]
# TEST: "blocked" flag after replacing filter mode to "exclude" [ OK ]
# TEST: (*, G) MDB entry default source list [ OK ]
# TEST: (S, G) MDB entry of 1st source after replacing source list [ OK ]
# TEST: (S, G) MDB entry of 2nd source after replacing source list [ OK ]
# TEST: (S, G) MDB entry of 3rd source after replacing source list [ OK ]
# TEST: (S, G) MDB entry of 1st source after removing source [ OK ]
# TEST: (S, G) MDB entry of 2nd source after removing source [ OK ]
# TEST: (S, G) MDB entry of 3rd source after removing source [ OK ]
# TEST: (*, G) MDB entry default protocol [ OK ]
# TEST: (S, G) MDB entry default protocol [ OK ]
# TEST: (*, G) MDB entry protocol after replacement [ OK ]
# TEST: (S, G) MDB entry protocol after replacement [ OK ]
# TEST: (*, G) MDB entry default destination port [ OK ]
# TEST: (S, G) MDB entry default destination port [ OK ]
# TEST: (*, G) MDB entry destination port after replacement [ OK ]
# TEST: (S, G) MDB entry destination port after replacement [ OK ]
# TEST: (*, G) MDB entry default destination VNI [ OK ]
# TEST: (S, G) MDB entry default destination VNI [ OK ]
# TEST: (*, G) MDB entry destination VNI after replacement [ OK ]
# TEST: (S, G) MDB entry destination VNI after replacement [ OK ]
# TEST: (*, G) MDB entry default outgoing interface [ OK ]
# TEST: (S, G) MDB entry default outgoing interface [ OK ]
# TEST: (*, G) MDB entry outgoing interface after replacement [ OK ]
# TEST: (S, G) MDB entry outgoing interface after replacement [ OK ]
# TEST: All-zeros group with filter mode [ OK ]
# TEST: All-zeros group with source list [ OK ]
# TEST: (*, G) INCLUDE with an empty source list [ OK ]
# TEST: Invalid source in source list [ OK ]
# TEST: Source list without filter mode [ OK ]
#
# Control path: (*, G) operations - IPv6 overlay / IPv6 underlay
# --------------------------------------------------------------
# TEST: (*, G) MDB entry addition with source list [ OK ]
# TEST: (*, G) MDB entry presence after addition [ OK ]
# TEST: (S, G) MDB entry presence after addition [ OK ]
# TEST: (*, G) MDB entry replacement with source list [ OK ]
# TEST: (*, G) MDB entry presence after replacement [ OK ]
# TEST: (S, G) MDB entry presence after replacement [ OK ]
# TEST: (*, G) MDB entry deletion [ OK ]
# TEST: (*, G) MDB entry presence after deletion [ OK ]
# TEST: (S, G) MDB entry presence after deletion [ OK ]
# TEST: (*, G) MDB entry default filter mode [ OK ]
# TEST: (*, G) MDB entry after replacing filter mode to "include" [ OK ]
# TEST: (S, G) MDB entry after replacing filter mode to "include" [ OK ]
# TEST: "blocked" flag after replacing filter mode to "include" [ OK ]
# TEST: (*, G) MDB entry after replacing filter mode to "exclude" [ OK ]
# TEST: (S, G) MDB entry after replacing filter mode to "exclude" [ OK ]
# TEST: "blocked" flag after replacing filter mode to "exclude" [ OK ]
# TEST: (*, G) MDB entry default source list [ OK ]
# TEST: (S, G) MDB entry of 1st source after replacing source list [ OK ]
# TEST: (S, G) MDB entry of 2nd source after replacing source list [ OK ]
# TEST: (S, G) MDB entry of 3rd source after replacing source list [ OK ]
# TEST: (S, G) MDB entry of 1st source after removing source [ OK ]
# TEST: (S, G) MDB entry of 2nd source after removing source [ OK ]
# TEST: (S, G) MDB entry of 3rd source after removing source [ OK ]
# TEST: (*, G) MDB entry default protocol [ OK ]
# TEST: (S, G) MDB entry default protocol [ OK ]
# TEST: (*, G) MDB entry protocol after replacement [ OK ]
# TEST: (S, G) MDB entry protocol after replacement [ OK ]
# TEST: (*, G) MDB entry default destination port [ OK ]
# TEST: (S, G) MDB entry default destination port [ OK ]
# TEST: (*, G) MDB entry destination port after replacement [ OK ]
# TEST: (S, G) MDB entry destination port after replacement [ OK ]
# TEST: (*, G) MDB entry default destination VNI [ OK ]
# TEST: (S, G) MDB entry default destination VNI [ OK ]
# TEST: (*, G) MDB entry destination VNI after replacement [ OK ]
# TEST: (S, G) MDB entry destination VNI after replacement [ OK ]
# TEST: (*, G) MDB entry default outgoing interface [ OK ]
# TEST: (S, G) MDB entry default outgoing interface [ OK ]
# TEST: (*, G) MDB entry outgoing interface after replacement [ OK ]
# TEST: (S, G) MDB entry outgoing interface after replacement [ OK ]
# TEST: All-zeros group with filter mode [ OK ]
# TEST: All-zeros group with source list [ OK ]
# TEST: (*, G) INCLUDE with an empty source list [ OK ]
# TEST: Invalid source in source list [ OK ]
# TEST: Source list without filter mode [ OK ]
#
# Control path: (S, G) operations - IPv4 overlay / IPv4 underlay
# --------------------------------------------------------------
# TEST: (S, G) MDB entry default filter mode [ OK ]
# TEST: (S, G) with filter mode [ OK ]
# TEST: (S, G) with source list [ OK ]
# TEST: (S, G) with an invalid source list [ OK ]
# TEST: All-zeros group with source [ OK ]
#
# Control path: (S, G) operations - IPv6 overlay / IPv4 underlay
# --------------------------------------------------------------
# TEST: (S, G) MDB entry default filter mode [ OK ]
# TEST: (S, G) with filter mode [ OK ]
# TEST: (S, G) with source list [ OK ]
# TEST: (S, G) with an invalid source list [ OK ]
# TEST: All-zeros group with source [ OK ]
#
# Control path: (S, G) operations - IPv4 overlay / IPv6 underlay
# --------------------------------------------------------------
# TEST: (S, G) MDB entry default filter mode [ OK ]
# TEST: (S, G) with filter mode [ OK ]
# TEST: (S, G) with source list [ OK ]
# TEST: (S, G) with an invalid source list [ OK ]
# TEST: All-zeros group with source [ OK ]
#
# Control path: (S, G) operations - IPv6 overlay / IPv6 underlay
# --------------------------------------------------------------
# TEST: (S, G) MDB entry default filter mode [ OK ]
# TEST: (S, G) with filter mode [ OK ]
# TEST: (S, G) with source list [ OK ]
# TEST: (S, G) with an invalid source list [ OK ]
# TEST: All-zeros group with source [ OK ]
#
# Control path: Large scale MDB dump - IPv4 overlay / IPv4 underlay
# -----------------------------------------------------------------
# TEST: Large scale dump - VXLAN device #1 [ OK ]
# TEST: Large scale dump - VXLAN device #2 [ OK ]
#
# Control path: Large scale MDB dump - IPv6 overlay / IPv4 underlay
# -----------------------------------------------------------------
# TEST: Large scale dump - VXLAN device #1 [ OK ]
# TEST: Large scale dump - VXLAN device #2 [ OK ]
#
# Control path: Large scale MDB dump - IPv4 overlay / IPv6 underlay
# -----------------------------------------------------------------
# TEST: Large scale dump - VXLAN device #1 [ OK ]
# TEST: Large scale dump - VXLAN device #2 [ OK ]
#
# Control path: Large scale MDB dump - IPv6 overlay / IPv6 underlay
# -----------------------------------------------------------------
# TEST: Large scale dump - VXLAN device #1 [ OK ]
# TEST: Large scale dump - VXLAN device #2 [ OK ]
#
# Control path: Flush
# -------------------
# TEST: Flush all [ OK ]
# TEST: Flush by port - matching [ OK ]
# TEST: Flush by port - non-matching [ OK ]
# TEST: Flush by source VNI - matching [ OK ]
# TEST: Flush by source VNI - non-matching [ OK ]
# TEST: Flush by "permanent" state [ OK ]
# TEST: Flush by "nopermanent" state [ OK ]
# TEST: Flush by routing protocol - matching [ OK ]
# TEST: Flush by routing protocol - non-matching [ OK ]
# TEST: Flush by IPv4 destination IP - matching [ OK ]
# TEST: Flush by IPv4 destination IP - non-matching [ OK ]
# TEST: Flush by IPv6 destination IP - matching [ OK ]
# TEST: Flush by IPv6 destination IP - non-matching [ OK ]
# TEST: Flush by UDP destination port - matching [ OK ]
# TEST: Flush by UDP destination port - non-matching [ OK ]
# TEST: Flush by device's UDP destination port - matching [ OK ]
# TEST: Flush by device's UDP destination port - non-matching [ OK ]
# TEST: Flush by destination VNI - matching [ OK ]
# TEST: Flush by destination VNI - non-matching [ OK ]
# TEST: Flush by destination VNI equal to source VNI - matching [ OK ]
# TEST: Flush by destination VNI equal to source VNI - non-matching [ OK ]
# TEST: Flush by VLAN ID [ OK ]
#
# Data path: Encapsulation parameters - IPv4 overlay / IPv4 underlay
# ------------------------------------------------------------------
# TEST: Destination IP - match [FAIL]
# TEST: Destination IP - no match [FAIL]
# TEST: Default destination port - match [FAIL]
# TEST: Default destination port - no match [FAIL]
# TEST: Non-default destination port - match [FAIL]
# TEST: Non-default destination port - no match [FAIL]
# TEST: Default destination VNI - match [FAIL]
# TEST: Default destination VNI - no match [FAIL]
# TEST: Non-default destination VNI - match [FAIL]
# TEST: Non-default destination VNI - no match [FAIL]
#
# Data path: Encapsulation parameters - IPv6 overlay / IPv4 underlay
# ------------------------------------------------------------------
# TEST: Destination IP - match [ OK ]
# TEST: Destination IP - no match [ OK ]
# TEST: Default destination port - match [ OK ]
# TEST: Default destination port - no match [ OK ]
# TEST: Non-default destination port - match [ OK ]
# TEST: Non-default destination port - no match [ OK ]
# TEST: Default destination VNI - match [ OK ]
# TEST: Default destination VNI - no match [ OK ]
# TEST: Non-default destination VNI - match [ OK ]
# TEST: Non-default destination VNI - no match [ OK ]
#
# Data path: Encapsulation parameters - IPv4 overlay / IPv6 underlay
# ------------------------------------------------------------------
# TEST: Destination IP - match [FAIL]
# TEST: Destination IP - no match [FAIL]
# TEST: Default destination port - match [FAIL]
# TEST: Default destination port - no match [FAIL]
# TEST: Non-default destination port - match [FAIL]
# TEST: Non-default destination port - no match [FAIL]
# TEST: Default destination VNI - match [FAIL]
# TEST: Default destination VNI - no match [FAIL]
# TEST: Non-default destination VNI - match [FAIL]
# TEST: Non-default destination VNI - no match [FAIL]
#
# Data path: Encapsulation parameters - IPv6 overlay / IPv6 underlay
# ------------------------------------------------------------------
# TEST: Destination IP - match [ OK ]
# TEST: Destination IP - no match [ OK ]
# TEST: Default destination port - match [ OK ]
# TEST: Default destination port - no match [ OK ]
# TEST: Non-default destination port - match [ OK ]
# TEST: Non-default destination port - no match [ OK ]
# TEST: Default destination VNI - match [ OK ]
# TEST: Default destination VNI - no match [ OK ]
# TEST: Non-default destination VNI - match [ OK ]
# TEST: Non-default destination VNI - no match [ OK ]
#
# Data path: (*, G) EXCLUDE - IR - IPv4 overlay / IPv4 underlay
# -------------------------------------------------------------
# TEST: Block excluded source - first VTEP [ OK ]
# TEST: Block excluded source - second VTEP [ OK ]
# TEST: Forward valid source - first VTEP [FAIL]
# TEST: Forward valid source - second VTEP [FAIL]
# TEST: Block excluded source after removal - first VTEP [FAIL]
# TEST: Block excluded source after removal - second VTEP [FAIL]
# TEST: Forward valid source after removal - first VTEP [FAIL]
# TEST: Forward valid source after removal - second VTEP [FAIL]
#
# Data path: (*, G) EXCLUDE - IR - IPv6 overlay / IPv4 underlay
# -------------------------------------------------------------
# TEST: Block excluded source - first VTEP [ OK ]
# TEST: Block excluded source - second VTEP [ OK ]
# TEST: Forward valid source - first VTEP [ OK ]
# TEST: Forward valid source - second VTEP [ OK ]
# TEST: Block excluded source after removal - first VTEP [ OK ]
# TEST: Block excluded source after removal - second VTEP [ OK ]
# TEST: Forward valid source after removal - first VTEP [ OK ]
# TEST: Forward valid source after removal - second VTEP [ OK ]
#
# Data path: (*, G) EXCLUDE - IR - IPv4 overlay / IPv6 underlay
# -------------------------------------------------------------
# TEST: Block excluded source - first VTEP [ OK ]
# TEST: Block excluded source - second VTEP [ OK ]
# TEST: Forward valid source - first VTEP [FAIL]
# TEST: Forward valid source - second VTEP [FAIL]
# TEST: Block excluded source after removal - first VTEP [FAIL]
# TEST: Block excluded source after removal - second VTEP [FAIL]
# TEST: Forward valid source after removal - first VTEP [FAIL]
# TEST: Forward valid source after removal - second VTEP [FAIL]
#
# Data path: (*, G) EXCLUDE - IR - IPv6 overlay / IPv6 underlay
# -------------------------------------------------------------
# TEST: Block excluded source - first VTEP [ OK ]
# TEST: Block excluded source - second VTEP [ OK ]
# TEST: Forward valid source - first VTEP [ OK ]
# TEST: Forward valid source - second VTEP [ OK ]
# TEST: Block excluded source after removal - first VTEP [ OK ]
# TEST: Block excluded source after removal - second VTEP [ OK ]
# TEST: Forward valid source after removal - first VTEP [ OK ]
# TEST: Forward valid source after removal - second VTEP [ OK ]
#
# Data path: (*, G) INCLUDE - IR - IPv4 overlay / IPv4 underlay
# -------------------------------------------------------------
# TEST: Block excluded source - first VTEP [ OK ]
# TEST: Block excluded source - second VTEP [ OK ]
# TEST: Forward valid source - first VTEP [FAIL]
# TEST: Forward valid source - second VTEP [FAIL]
# TEST: Block excluded source after removal - first VTEP [FAIL]
# TEST: Block excluded source after removal - second VTEP [FAIL]
# TEST: Forward valid source after removal - first VTEP [FAIL]
# TEST: Forward valid source after removal - second VTEP [FAIL]
#
# Data path: (*, G) INCLUDE - IR - IPv6 overlay / IPv4 underlay
# -------------------------------------------------------------
# TEST: Block excluded source - first VTEP [ OK ]
# TEST: Block excluded source - second VTEP [ OK ]
# TEST: Forward valid source - first VTEP [ OK ]
# TEST: Forward valid source - second VTEP [ OK ]
# TEST: Block excluded source after removal - first VTEP [ OK ]
# TEST: Block excluded source after removal - second VTEP [ OK ]
# TEST: Forward valid source after removal - first VTEP [ OK ]
# TEST: Forward valid source after removal - second VTEP [ OK ]
#
# Data path: (*, G) INCLUDE - IR - IPv4 overlay / IPv6 underlay
# -------------------------------------------------------------
# TEST: Block excluded source - first VTEP [ OK ]
# TEST: Block excluded source - second VTEP [ OK ]
# TEST: Forward valid source - first VTEP [FAIL]
# TEST: Forward valid source - second VTEP [FAIL]
# TEST: Block excluded source after removal - first VTEP [FAIL]
# TEST: Block excluded source after removal - second VTEP [FAIL]
# TEST: Forward valid source after removal - first VTEP [FAIL]
# TEST: Forward valid source after removal - second VTEP [FAIL]
#
# Data path: (*, G) INCLUDE - IR - IPv6 overlay / IPv6 underlay
# -------------------------------------------------------------
# TEST: Block excluded source - first VTEP [ OK ]
# TEST: Block excluded source - second VTEP [ OK ]
# TEST: Forward valid source - first VTEP [ OK ]
# TEST: Forward valid source - second VTEP [ OK ]
# TEST: Block excluded source after removal - first VTEP [ OK ]
# TEST: Block excluded source after removal - second VTEP [ OK ]
# TEST: Forward valid source after removal - first VTEP [ OK ]
# TEST: Forward valid source after removal - second VTEP [ OK ]
#
# Data path: (*, G) EXCLUDE - P2MP - IPv4 overlay / IPv4 underlay
# ---------------------------------------------------------------
# TEST: Block excluded source [ OK ]
# TEST: Forward valid source [FAIL]
# TEST: Receive of valid source after removal from group [FAIL]
#
# Data path: (*, G) EXCLUDE - P2MP - IPv6 overlay / IPv4 underlay
# ---------------------------------------------------------------
# TEST: Block excluded source [ OK ]
# TEST: Forward valid source [ OK ]
# TEST: Receive of valid source after removal from group [ OK ]
#
# Data path: (*, G) EXCLUDE - P2MP - IPv4 overlay / IPv6 underlay
# ---------------------------------------------------------------
# TEST: Block excluded source [ OK ]
# TEST: Forward valid source [FAIL]
# TEST: Receive of valid source after removal from group [FAIL]
#
# Data path: (*, G) EXCLUDE - P2MP - IPv6 overlay / IPv6 underlay
# ---------------------------------------------------------------
# TEST: Block excluded source [ OK ]
# TEST: Forward valid source [ OK ]
# TEST: Receive of valid source after removal from group [ OK ]
#
# Data path: (*, G) INCLUDE - P2MP - IPv4 overlay / IPv4 underlay
# ---------------------------------------------------------------
# TEST: Block excluded source [ OK ]
# TEST: Forward valid source [FAIL]
# TEST: Receive of valid source after removal from group [FAIL]
#
# Data path: (*, G) INCLUDE - P2MP - IPv6 overlay / IPv4 underlay
# ---------------------------------------------------------------
# TEST: Block excluded source [ OK ]
# TEST: Forward valid source [ OK ]
# TEST: Receive of valid source after removal from group [ OK ]
#
# Data path: (*, G) INCLUDE - P2MP - IPv4 overlay / IPv6 underlay
# ---------------------------------------------------------------
# TEST: Block excluded source [ OK ]
# TEST: Forward valid source [FAIL]
# TEST: Receive of valid source after removal from group [FAIL]
#
# Data path: (*, G) INCLUDE - P2MP - IPv6 overlay / IPv6 underlay
# ---------------------------------------------------------------
# TEST: Block excluded source [ OK ]
# TEST: Forward valid source [ OK ]
# TEST: Receive of valid source after removal from group [ OK ]
#
# Data path: Egress VNI translation - IPv4 overlay / IPv4 underlay
# ----------------------------------------------------------------
# TEST: Egress VNI translation - PVID configured [FAIL]
# TEST: Egress VNI translation - no PVID configured [FAIL]
# TEST: Egress VNI translation - PVID reconfigured [FAIL]
#
# Data path: Egress VNI translation - IPv6 overlay / IPv4 underlay
# ----------------------------------------------------------------
# TEST: Egress VNI translation - PVID configured [ OK ]
# TEST: Egress VNI translation - no PVID configured [ OK ]
# TEST: Egress VNI translation - PVID reconfigured [ OK ]
#
# Data path: Egress VNI translation - IPv4 overlay / IPv6 underlay
# ----------------------------------------------------------------
# TEST: Egress VNI translation - PVID configured [FAIL]
# TEST: Egress VNI translation - no PVID configured [FAIL]
# TEST: Egress VNI translation - PVID reconfigured [FAIL]
#
# Data path: Egress VNI translation - IPv6 overlay / IPv6 underlay
# ----------------------------------------------------------------
# TEST: Egress VNI translation - PVID configured [ OK ]
# TEST: Egress VNI translation - no PVID configured [ OK ]
# TEST: Egress VNI translation - PVID reconfigured [ OK ]
#
# Data path: All-zeros MDB entry - IPv4 underlay
# ----------------------------------------------
# TEST: Registered IPv4 multicast - first VTEP [FAIL]
# TEST: Registered IPv4 multicast - second VTEP [ OK ]
# TEST: Unregistered IPv4 multicast - first VTEP [FAIL]
# TEST: Unregistered IPv4 multicast - second VTEP [FAIL]
# TEST: Link-local IPv4 multicast - first VTEP [FAIL]
# TEST: Link-local IPv4 multicast - second VTEP [FAIL]
# TEST: Registered IPv4 multicast with a unicast MAC - first VTEP [FAIL]
# TEST: Registered IPv4 multicast with a unicast MAC - second VTEP [FAIL]
# TEST: Registered IPv4 multicast with a broadcast MAC - first VTEP [FAIL]
# TEST: Registered IPv4 multicast with a broadcast MAC - second VTEP [FAIL]
# TEST: IPv4 traffic - third VTEP [ OK ]
# TEST: IPv4 traffic - fourth VTEP [ OK ]
# TEST: Registered IPv6 multicast - third VTEP [ OK ]
# TEST: Registered IPv6 multicast - fourth VTEP [ OK ]
# TEST: Unregistered IPv6 multicast - third VTEP [ OK ]
# TEST: Unregistered IPv6 multicast - fourth VTEP [ OK ]
# TEST: Link-local IPv6 multicast - third VTEP [ OK ]
# TEST: Link-local IPv6 multicast - fourth VTEP [ OK ]
# TEST: Registered IPv6 multicast with a unicast MAC - third VTEP [ OK ]
# TEST: Registered IPv6 multicast with a unicast MAC - fourth VTEP [ OK ]
# TEST: Registered IPv6 multicast with a broadcast MAC - third VTEP [ OK ]
# TEST: Registered IPv6 multicast with a broadcast MAC - fourth VTEP [ OK ]
# TEST: IPv6 traffic - first VTEP [ OK ]
# TEST: IPv6 traffic - second VTEP [ OK ]
#
# Data path: All-zeros MDB entry - IPv6 underlay
# ----------------------------------------------
# TEST: Registered IPv4 multicast - first VTEP [FAIL]
# TEST: Registered IPv4 multicast - second VTEP [ OK ]
# TEST: Unregistered IPv4 multicast - first VTEP [FAIL]
# TEST: Unregistered IPv4 multicast - second VTEP [FAIL]
# TEST: Link-local IPv4 multicast - first VTEP [FAIL]
# TEST: Link-local IPv4 multicast - second VTEP [FAIL]
# TEST: Registered IPv4 multicast with a unicast MAC - first VTEP [FAIL]
# TEST: Registered IPv4 multicast with a unicast MAC - second VTEP [FAIL]
# TEST: Registered IPv4 multicast with a broadcast MAC - first VTEP [FAIL]
# TEST: Registered IPv4 multicast with a broadcast MAC - second VTEP [FAIL]
# TEST: IPv4 traffic - third VTEP [ OK ]
# TEST: IPv4 traffic - fourth VTEP [ OK ]
# TEST: Registered IPv6 multicast - third VTEP [ OK ]
# TEST: Registered IPv6 multicast - fourth VTEP [ OK ]
# TEST: Unregistered IPv6 multicast - third VTEP [ OK ]
# TEST: Unregistered IPv6 multicast - fourth VTEP [ OK ]
# TEST: Link-local IPv6 multicast - third VTEP [ OK ]
# TEST: Link-local IPv6 multicast - fourth VTEP [ OK ]
# TEST: Registered IPv6 multicast with a unicast MAC - third VTEP [ OK ]
# TEST: Registered IPv6 multicast with a unicast MAC - fourth VTEP [ OK ]
# TEST: Registered IPv6 multicast with a broadcast MAC - third VTEP [ OK ]
# TEST: Registered IPv6 multicast with a broadcast MAC - fourth VTEP [ OK ]
# TEST: IPv6 traffic - first VTEP [ OK ]
# TEST: IPv6 traffic - second VTEP [ OK ]
#
# Data path: MDB with FDB - IPv4 overlay / IPv4 underlay
# ------------------------------------------------------
# TEST: IP multicast - first VTEP [FAIL]
# TEST: IP multicast - second VTEP [ OK ]
# TEST: Broadcast - first VTEP [FAIL]
# TEST: Broadcast - second VTEP [ OK ]
# TEST: IP multicast after removal - first VTEP [FAIL]
# TEST: IP multicast after removal - second VTEP [FAIL]
#
# Data path: MDB with FDB - IPv6 overlay / IPv4 underlay
# ------------------------------------------------------
# TEST: IP multicast - first VTEP [ OK ]
# TEST: IP multicast - second VTEP [ OK ]
# TEST: Broadcast - first VTEP [ OK ]
# TEST: Broadcast - second VTEP [ OK ]
# TEST: IP multicast after removal - first VTEP [ OK ]
# TEST: IP multicast after removal - second VTEP [ OK ]
#
# Data path: MDB with FDB - IPv4 overlay / IPv6 underlay
# ------------------------------------------------------
# TEST: IP multicast - first VTEP [FAIL]
# TEST: IP multicast - second VTEP [ OK ]
# TEST: Broadcast - first VTEP [FAIL]
# TEST: Broadcast - second VTEP [ OK ]
# TEST: IP multicast after removal - first VTEP [FAIL]
# TEST: IP multicast after removal - second VTEP [FAIL]
#
# Data path: MDB with FDB - IPv6 overlay / IPv6 underlay
# ------------------------------------------------------
# TEST: IP multicast - first VTEP [ OK ]
# TEST: IP multicast - second VTEP [ OK ]
# TEST: Broadcast - first VTEP [ OK ]
# TEST: Broadcast - second VTEP [ OK ]
# TEST: IP multicast after removal - first VTEP [ OK ]
# TEST: IP multicast after removal - second VTEP [ OK ]
#
# Data path: MDB torture test - IPv4 overlay / IPv4 underlay
# ----------------------------------------------------------
# TEST: Torture test [ OK ]
#
# Data path: MDB torture test - IPv6 overlay / IPv4 underlay
# ----------------------------------------------------------
# TEST: Torture test [ OK ]
#
# Data path: MDB torture test - IPv4 overlay / IPv6 underlay
# ----------------------------------------------------------
# TEST: Torture test [ OK ]
#
# Data path: MDB torture test - IPv6 overlay / IPv6 underlay
# ----------------------------------------------------------
# TEST: Torture test [ OK ]
#
# Tests passed: 558
# Tests failed: 84
not ok 90 selftests: net: test_vxlan_mdb.sh # exit=1
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [BUG] selftests/net: test_vxlan_mdb.sh: 84 out of 642 tests [FAIL]
2024-03-16 23:19 [BUG] selftests/net: test_vxlan_mdb.sh: 84 out of 642 tests [FAIL] Mirsad Todorovac
@ 2024-03-18 3:35 ` Hangbin Liu
2024-03-19 5:05 ` Mirsad Todorovac
0 siblings, 1 reply; 8+ messages in thread
From: Hangbin Liu @ 2024-03-18 3:35 UTC (permalink / raw)
To: Mirsad Todorovac
Cc: netdev, David S. Miller, Eric Dumazet, Jakub Kicinski,
Paolo Abeni, Shuah Khan, linux-kselftest, linux-kernel,
Ido Schimmel
On Sun, Mar 17, 2024 at 12:19:12AM +0100, Mirsad Todorovac wrote:
> Hi,
>
> While running kselftest on vanilla torvalds tree kernel commit v6.8-11167-g4438a810f396,
> the test suite reported a number of errors.
>
> I was using the latest iproute2-next suite on an Ubuntu 22.04 LTS box.
>
> # Tests passed: 558
> # Tests failed: 84
> not ok 90 selftests: net: test_vxlan_mdb.sh # exit=1
FYI, I tested with 6.8 kernel with net tree. All passed.
Data path: MDB torture test - IPv6 overlay / IPv6 underlay
----------------------------------------------------------
TEST: Torture test [ OK ]
Tests passed: 642
Tests failed: 0
# uname -r
6.8.0-virtme
Thanks
Hangbin
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [BUG] selftests/net: test_vxlan_mdb.sh: 84 out of 642 tests [FAIL]
2024-03-18 3:35 ` Hangbin Liu
@ 2024-03-19 5:05 ` Mirsad Todorovac
2024-03-19 14:25 ` Ido Schimmel
0 siblings, 1 reply; 8+ messages in thread
From: Mirsad Todorovac @ 2024-03-19 5:05 UTC (permalink / raw)
To: Hangbin Liu
Cc: netdev, David S. Miller, Eric Dumazet, Jakub Kicinski,
Paolo Abeni, Shuah Khan, linux-kselftest, linux-kernel,
Ido Schimmel
On 3/18/24 04:35, Hangbin Liu wrote:
> On Sun, Mar 17, 2024 at 12:19:12AM +0100, Mirsad Todorovac wrote:
>> Hi,
>>
>> While running kselftest on vanilla torvalds tree kernel commit v6.8-11167-g4438a810f396,
>> the test suite reported a number of errors.
>>
>> I was using the latest iproute2-next suite on an Ubuntu 22.04 LTS box.
>>
>> # Tests passed: 558
>> # Tests failed: 84
>> not ok 90 selftests: net: test_vxlan_mdb.sh # exit=1
>
> FYI, I tested with 6.8 kernel with net tree. All passed.
>
> Data path: MDB torture test - IPv6 overlay / IPv6 underlay
> ----------------------------------------------------------
> TEST: Torture test [ OK ]
>
> Tests passed: 642
> Tests failed: 0
>
> # uname -r
> 6.8.0-virtme
>
> Thanks
> Hangbin
Hi, Hangbin,
I am running an Ubuntu 22.04 LTS configuration.
I tried it again with 6.8.0-net-next-05204-g237bb5f7f7f5 and iproute2-next
from this repo: https://git.kernel.org/pub/scm/network/iproute2/iproute2-next.git
RESULTS:
# Data path: MDB torture test - IPv6 overlay / IPv6 underlay
# ----------------------------------------------------------
# TEST: Torture test [ OK ]
#
# Tests passed: 558
# Tests failed: 84
not ok 90 selftests: net: test_vxlan_mdb.sh # exit=1
David said there may be something in sysctl.conf:
#
# /etc/sysctl.conf - Configuration file for setting system variables
# See /etc/sysctl.d/ for additional system variables.
# See sysctl.conf (5) for information.
#
#kernel.domainname = example.com
# Uncomment the following to stop low-level messages on console
#kernel.printk = 3 4 1 3
###################################################################
# Functions previously found in netbase
#
# Uncomment the next two lines to enable Spoof protection (reverse-path filter)
# Turn on Source Address Verification in all interfaces to
# prevent some spoofing attacks
#net.ipv4.conf.default.rp_filter=1
#net.ipv4.conf.all.rp_filter=1
# Uncomment the next line to enable TCP/IP SYN cookies
# See http://lwn.net/Articles/277146/
# Note: This may impact IPv6 TCP sessions too
#net.ipv4.tcp_syncookies=1
# Uncomment the next line to enable packet forwarding for IPv4
net.ipv4.ip_forward=1
# Uncomment the next line to enable packet forwarding for IPv6
# Enabling this option disables Stateless Address Autoconfiguration
# based on Router Advertisements for this host
#net.ipv6.conf.all.forwarding=1
net.ipv4.conf.default.rp_filter = 0
net.ipv4.conf.all.rp_filter = 0
###################################################################
# Additional settings - these settings can improve the network
# security of the host and prevent against some network attacks
# including spoofing attacks and man in the middle attacks through
# redirection. Some network environments, however, require that these
# settings are disabled so review and enable them as needed.
#
# Do not accept ICMP redirects (prevent MITM attacks)
net.ipv4.conf.all.accept_redirects = 0
net.ipv6.conf.all.accept_redirects = 0
net.ipv4.conf.default.accept_redirects = 0
net.ipv6.conf.default.accept_redirects = 0
# _or_
# Accept ICMP redirects only for gateways listed in our default
# gateway list (enabled by default)
# net.ipv4.conf.all.secure_redirects = 1
#
# Do not send ICMP redirects (we are not a router)
net.ipv4.conf.all.send_redirects = 0
net.ipv4.conf.default.send_redirects = 0
net.ipv4.icmp_ignore_bogus_error_responses = 1
#
# Do not accept IP source route packets (we are not a router)
net.ipv4.conf.all.accept_source_route = 0
net.ipv6.conf.all.accept_source_route = 0
#
# Log Martian Packets
net.ipv4.conf.all.log_martians = 0
net.ipv4.conf.default.log_martians = 0
#
###################################################################
# Magic system request Key
# 0=disable, 1=enable all, >1 bitmask of sysrq functions
# See https://www.kernel.org/doc/html/latest/admin-guide/sysrq.html
# for what other values do
#kernel.sysrq=438
Best regards,
Mirsad
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [BUG] selftests/net: test_vxlan_mdb.sh: 84 out of 642 tests [FAIL]
2024-03-19 5:05 ` Mirsad Todorovac
@ 2024-03-19 14:25 ` Ido Schimmel
2024-03-20 0:47 ` Mirsad Todorovac
0 siblings, 1 reply; 8+ messages in thread
From: Ido Schimmel @ 2024-03-19 14:25 UTC (permalink / raw)
To: Mirsad Todorovac
Cc: Hangbin Liu, netdev, David S. Miller, Eric Dumazet,
Jakub Kicinski, Paolo Abeni, Shuah Khan, linux-kselftest,
linux-kernel
On Tue, Mar 19, 2024 at 06:05:16AM +0100, Mirsad Todorovac wrote:
> On 3/18/24 04:35, Hangbin Liu wrote:
> > On Sun, Mar 17, 2024 at 12:19:12AM +0100, Mirsad Todorovac wrote:
> > > Hi,
> > >
> > > While running kselftest on vanilla torvalds tree kernel commit v6.8-11167-g4438a810f396,
> > > the test suite reported a number of errors.
> > >
> > > I was using the latest iproute2-next suite on an Ubuntu 22.04 LTS box.
> > >
> > > # Tests passed: 558
> > > # Tests failed: 84
> > > not ok 90 selftests: net: test_vxlan_mdb.sh # exit=1
> >
> > FYI, I tested with 6.8 kernel with net tree. All passed.
> >
> > Data path: MDB torture test - IPv6 overlay / IPv6 underlay
> > ----------------------------------------------------------
> > TEST: Torture test [ OK ]
> >
> > Tests passed: 642
> > Tests failed: 0
> >
> > # uname -r
> > 6.8.0-virtme
> >
> > Thanks
> > Hangbin
>
> Hi, Hangbin,
>
> I am running an Ubuntu 22.04 LTS configuration.
Didn't get your first mail for some reason. Anyway, it might be related
to the fact that Ubuntu is using an old version of libnet:
https://launchpad.net/ubuntu/+source/libnet
I remember fixing similar issues in the past:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=cb034948ac292da82cc0e6bc1340f81be36e117d
Will look into it today or later this week.
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [BUG] selftests/net: test_vxlan_mdb.sh: 84 out of 642 tests [FAIL]
2024-03-19 14:25 ` Ido Schimmel
@ 2024-03-20 0:47 ` Mirsad Todorovac
2024-03-20 11:01 ` Ido Schimmel
0 siblings, 1 reply; 8+ messages in thread
From: Mirsad Todorovac @ 2024-03-20 0:47 UTC (permalink / raw)
To: Ido Schimmel
Cc: Hangbin Liu, netdev, David S. Miller, Eric Dumazet,
Jakub Kicinski, Paolo Abeni, Shuah Khan, linux-kselftest,
linux-kernel
On 3/19/24 15:25, Ido Schimmel wrote:
> On Tue, Mar 19, 2024 at 06:05:16AM +0100, Mirsad Todorovac wrote:
>> On 3/18/24 04:35, Hangbin Liu wrote:
>>> On Sun, Mar 17, 2024 at 12:19:12AM +0100, Mirsad Todorovac wrote:
>>>> Hi,
>>>>
>>>> While running kselftest on vanilla torvalds tree kernel commit v6.8-11167-g4438a810f396,
>>>> the test suite reported a number of errors.
>>>>
>>>> I was using the latest iproute2-next suite on an Ubuntu 22.04 LTS box.
>>>>
>>>> # Tests passed: 558
>>>> # Tests failed: 84
>>>> not ok 90 selftests: net: test_vxlan_mdb.sh # exit=1
>>>
>>> FYI, I tested with 6.8 kernel with net tree. All passed.
>>>
>>> Data path: MDB torture test - IPv6 overlay / IPv6 underlay
>>> ----------------------------------------------------------
>>> TEST: Torture test [ OK ]
>>>
>>> Tests passed: 642
>>> Tests failed: 0
>>>
>>> # uname -r
>>> 6.8.0-virtme
>>>
>>> Thanks
>>> Hangbin
>>
>> Hi, Hangbin,
>>
>> I am running an Ubuntu 22.04 LTS configuration.
>
> Didn't get your first mail for some reason.
Your organisation's Office 365 is configured against compressed attachments:
Diagnostic-Code: smtp;550 5.0.350 One or more of the attachments in your email is of a file type
that is NOT allowed by the recipient's organization.
I will try to remember this.
> Anyway, it might be related
> to the fact that Ubuntu is using an old version of libnet:
>
> https://launchpad.net/ubuntu/+source/libnet
>
> I remember fixing similar issues in the past:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=cb034948ac292da82cc0e6bc1340f81be36e117d
I recall that last August.
> Will look into it today or later this week.
Thank you for considering this.
Best regards,
Mirsad Todorovac
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [BUG] selftests/net: test_vxlan_mdb.sh: 84 out of 642 tests [FAIL]
2024-03-20 0:47 ` Mirsad Todorovac
@ 2024-03-20 11:01 ` Ido Schimmel
2024-03-21 20:08 ` Mirsad Todorovac
2024-03-21 20:10 ` Mirsad Todorovac
0 siblings, 2 replies; 8+ messages in thread
From: Ido Schimmel @ 2024-03-20 11:01 UTC (permalink / raw)
To: Mirsad Todorovac
Cc: Hangbin Liu, netdev, David S. Miller, Eric Dumazet,
Jakub Kicinski, Paolo Abeni, Shuah Khan, linux-kselftest,
linux-kernel
On Wed, Mar 20, 2024 at 01:47:36AM +0100, Mirsad Todorovac wrote:
> On 3/19/24 15:25, Ido Schimmel wrote:
> > Will look into it today or later this week.
>
> Thank you for considering this.
Can you please try the following patch?
https://github.com/idosch/linux/commit/58f25dd8766dbe9ac50c76b44f9ba92350ebb5c6.patch
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [BUG] selftests/net: test_vxlan_mdb.sh: 84 out of 642 tests [FAIL]
2024-03-20 11:01 ` Ido Schimmel
@ 2024-03-21 20:08 ` Mirsad Todorovac
2024-03-21 20:10 ` Mirsad Todorovac
1 sibling, 0 replies; 8+ messages in thread
From: Mirsad Todorovac @ 2024-03-21 20:08 UTC (permalink / raw)
To: Ido Schimmel
Cc: Hangbin Liu, netdev, David S. Miller, Eric Dumazet,
Jakub Kicinski, Paolo Abeni, Shuah Khan, linux-kselftest,
linux-kernel
On 3/20/24 12:01, Ido Schimmel wrote:
> On Wed, Mar 20, 2024 at 01:47:36AM +0100, Mirsad Todorovac wrote:
>> On 3/19/24 15:25, Ido Schimmel wrote:
>>> Will look into it today or later this week.
>>
>> Thank you for considering this.
>
> Can you please try the following patch?
>
> https://github.com/idosch/linux/commit/58f25dd8766dbe9ac50c76b44f9ba92350ebb5c6.patch
Congratulations, apparently, your patch had fixed them all:
# TEST: Torture test [ OK ]
#
# Data path: MDB torture test - IPv6 overlay / IPv6 underlay
# ----------------------------------------------------------
# TEST: Torture test [ OK ]
#
# Tests passed: 642
# Tests failed: 0
ok 90 selftests: net: test_vxlan_mdb.sh
Please consider adding:
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
at your convenience.
Shalom, and have a great evening!
Best regards,
Mirsad Todorovac
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [BUG] selftests/net: test_vxlan_mdb.sh: 84 out of 642 tests [FAIL]
2024-03-20 11:01 ` Ido Schimmel
2024-03-21 20:08 ` Mirsad Todorovac
@ 2024-03-21 20:10 ` Mirsad Todorovac
1 sibling, 0 replies; 8+ messages in thread
From: Mirsad Todorovac @ 2024-03-21 20:10 UTC (permalink / raw)
To: Ido Schimmel
Cc: Hangbin Liu, netdev, David S. Miller, Eric Dumazet,
Jakub Kicinski, Paolo Abeni, Shuah Khan, linux-kselftest,
linux-kernel
On 3/20/24 12:01, Ido Schimmel wrote:
> On Wed, Mar 20, 2024 at 01:47:36AM +0100, Mirsad Todorovac wrote:
>> On 3/19/24 15:25, Ido Schimmel wrote:
>>> Will look into it today or later this week.
>>
>> Thank you for considering this.
>
> Can you please try the following patch?
>
> https://github.com/idosch/linux/commit/58f25dd8766dbe9ac50c76b44f9ba92350ebb5c6.patch
Congratulations, apparently, your patch had fixed them all:
# TEST: Torture test [ OK ]
#
# Data path: MDB torture test - IPv6 overlay / IPv6 underlay
# ----------------------------------------------------------
# TEST: Torture test [ OK ]
#
# Tests passed: 642
# Tests failed: 0
ok 90 selftests: net: test_vxlan_mdb.sh
Please consider adding:
Tested-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
at your convenience.
Shalom, and have a great evening!
Best regards,
Mirsad Todorovac
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2024-03-21 20:10 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-03-16 23:19 [BUG] selftests/net: test_vxlan_mdb.sh: 84 out of 642 tests [FAIL] Mirsad Todorovac
2024-03-18 3:35 ` Hangbin Liu
2024-03-19 5:05 ` Mirsad Todorovac
2024-03-19 14:25 ` Ido Schimmel
2024-03-20 0:47 ` Mirsad Todorovac
2024-03-20 11:01 ` Ido Schimmel
2024-03-21 20:08 ` Mirsad Todorovac
2024-03-21 20:10 ` Mirsad Todorovac
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).