From: Jonathan Toppins <jtoppins@cumulusnetworks.com>
To: netdev@vger.kernel.org, Jay Vosburgh <j.vosburgh@gmail.com>,
Veaceslav Falico <vfalico@gmail.com>,
Andy Gospodarek <gospo@cumulusnetworks.com>,
shm@cumulusnetworks.com, razor@blackwall.org,
David Miller <davem@davemloft.net>
Subject: [PATCH linux v3 net-next 4/4] bonding: add netlink support for sys prio, actor sys mac, and port key
Date: Sat, 9 May 2015 00:01:58 -0700 [thread overview]
Message-ID: <c26a9459226784190a8503418c1375bfe1f90cae.1431150701.git.jtoppins@cumulusnetworks.com> (raw)
In-Reply-To: <cover.1431150701.git.jtoppins@cumulusnetworks.com>
In-Reply-To: <cover.1431150701.git.jtoppins@cumulusnetworks.com>
From: Andy Gospodarek <gospo@cumulusnetworks.com>
Adds netlink support for the following bonding options:
* BOND_OPT_AD_ACTOR_SYS_PRIO
* BOND_OPT_AD_ACTOR_SYSTEM
* BOND_OPT_AD_USER_PORT_KEY
When setting the actor system mac address we assume the netlink message
contains a binary mac and not a string representation of a mac.
Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com>
[jt: completed the setting side of the netlink attributes]
Signed-off-by: Jonathan Toppins <jtoppins@cumulusnetworks.com>
---
v2:
* rebased
v3:
* removed parenthesis from around values in the netdev_info calls in
bond_option_ad_actor_sys_prio_set() and
bond_option_ad_user_port_key_set()
* fixed up bond_option_ad_actor_system_set() to support handling both
string and value setting as Nik suggested
drivers/net/bonding/bond_netlink.c | 50 ++++++++++++++++++++++++++++++++++++
drivers/net/bonding/bond_options.c | 30 +++++++++++++++-------
include/uapi/linux/if_link.h | 3 +++
3 files changed, 74 insertions(+), 9 deletions(-)
diff --git a/drivers/net/bonding/bond_netlink.c b/drivers/net/bonding/bond_netlink.c
index 7b11243..f7015eb 100644
--- a/drivers/net/bonding/bond_netlink.c
+++ b/drivers/net/bonding/bond_netlink.c
@@ -94,6 +94,10 @@ static const struct nla_policy bond_policy[IFLA_BOND_MAX + 1] = {
[IFLA_BOND_AD_LACP_RATE] = { .type = NLA_U8 },
[IFLA_BOND_AD_SELECT] = { .type = NLA_U8 },
[IFLA_BOND_AD_INFO] = { .type = NLA_NESTED },
+ [IFLA_BOND_AD_ACTOR_SYS_PRIO] = { .type = NLA_U16 },
+ [IFLA_BOND_AD_USER_PORT_KEY] = { .type = NLA_U16 },
+ [IFLA_BOND_AD_ACTOR_SYSTEM] = { .type = NLA_BINARY,
+ .len = ETH_ALEN },
};
static const struct nla_policy bond_slave_policy[IFLA_BOND_SLAVE_MAX + 1] = {
@@ -379,6 +383,36 @@ static int bond_changelink(struct net_device *bond_dev,
if (err)
return err;
}
+ if (data[IFLA_BOND_AD_ACTOR_SYS_PRIO]) {
+ int actor_sys_prio =
+ nla_get_u16(data[IFLA_BOND_AD_ACTOR_SYS_PRIO]);
+
+ bond_opt_initval(&newval, actor_sys_prio);
+ err = __bond_opt_set(bond, BOND_OPT_AD_ACTOR_SYS_PRIO, &newval);
+ if (err)
+ return err;
+ }
+
+ if (data[IFLA_BOND_AD_USER_PORT_KEY]) {
+ int port_key =
+ nla_get_u16(data[IFLA_BOND_AD_USER_PORT_KEY]);
+
+ bond_opt_initval(&newval, port_key);
+ err = __bond_opt_set(bond, BOND_OPT_AD_USER_PORT_KEY, &newval);
+ if (err)
+ return err;
+ }
+
+ if (data[IFLA_BOND_AD_ACTOR_SYSTEM]) {
+ if (nla_len(data[IFLA_BOND_AD_ACTOR_SYSTEM]) != ETH_ALEN)
+ return -EINVAL;
+
+ bond_opt_initval(&newval,
+ nla_get_be64(data[IFLA_BOND_AD_ACTOR_SYSTEM]));
+ err = __bond_opt_set(bond, BOND_OPT_AD_ACTOR_SYSTEM, &newval);
+ if (err)
+ return err;
+ }
return 0;
}
@@ -426,6 +460,9 @@ static size_t bond_get_size(const struct net_device *bond_dev)
nla_total_size(sizeof(u16)) + /* IFLA_BOND_AD_INFO_ACTOR_KEY */
nla_total_size(sizeof(u16)) + /* IFLA_BOND_AD_INFO_PARTNER_KEY*/
nla_total_size(ETH_ALEN) + /* IFLA_BOND_AD_INFO_PARTNER_MAC*/
+ nla_total_size(sizeof(u16)) + /* IFLA_BOND_AD_ACTOR_SYS_PRIO */
+ nla_total_size(sizeof(u16)) + /* IFLA_BOND_AD_USER_PORT_KEY */
+ nla_total_size(ETH_ALEN) + /* IFLA_BOND_AD_ACTOR_SYSTEM */
0;
}
@@ -551,6 +588,19 @@ static int bond_fill_info(struct sk_buff *skb,
if (BOND_MODE(bond) == BOND_MODE_8023AD) {
struct ad_info info;
+ if (nla_put_u16(skb, IFLA_BOND_AD_ACTOR_SYS_PRIO,
+ bond->params.ad_actor_sys_prio))
+ goto nla_put_failure;
+
+ if (nla_put_u16(skb, IFLA_BOND_AD_USER_PORT_KEY,
+ bond->params.ad_user_port_key))
+ goto nla_put_failure;
+
+ if (nla_put(skb, IFLA_BOND_AD_ACTOR_SYSTEM,
+ sizeof(bond->params.ad_actor_system),
+ &bond->params.ad_actor_system))
+ goto nla_put_failure;
+
if (!bond_3ad_get_active_agg_info(bond, &info)) {
struct nlattr *nest;
diff --git a/drivers/net/bonding/bond_options.c b/drivers/net/bonding/bond_options.c
index c85da05..9a32bbd77 100644
--- a/drivers/net/bonding/bond_options.c
+++ b/drivers/net/bonding/bond_options.c
@@ -1394,7 +1394,7 @@ static int bond_option_tlb_dynamic_lb_set(struct bonding *bond,
static int bond_option_ad_actor_sys_prio_set(struct bonding *bond,
const struct bond_opt_value *newval)
{
- netdev_info(bond->dev, "Setting ad_actor_sys_prio to (%llu)\n",
+ netdev_info(bond->dev, "Setting ad_actor_sys_prio to %llu\n",
newval->value);
bond->params.ad_actor_sys_prio = newval->value;
@@ -1405,24 +1405,36 @@ static int bond_option_ad_actor_system_set(struct bonding *bond,
const struct bond_opt_value *newval)
{
u8 macaddr[ETH_ALEN];
+ u8 *mac;
int i;
- i = sscanf(newval->string, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx",
- &macaddr[0], &macaddr[1], &macaddr[2],
- &macaddr[3], &macaddr[4], &macaddr[5]);
- if (i != ETH_ALEN || !is_valid_ether_addr(macaddr)) {
- netdev_err(bond->dev, "Invalid MAC address.\n");
- return -EINVAL;
+ if (newval->string) {
+ i = sscanf(newval->string, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx",
+ &macaddr[0], &macaddr[1], &macaddr[2],
+ &macaddr[3], &macaddr[4], &macaddr[5]);
+ if (i != ETH_ALEN)
+ goto err;
+ mac = macaddr;
+ } else {
+ mac = (u8 *)&newval->value;
}
- ether_addr_copy(bond->params.ad_actor_system, macaddr);
+ if (!is_valid_ether_addr(mac))
+ goto err;
+
+ netdev_info(bond->dev, "Setting ad_actor_system to %pM\n", mac);
+ ether_addr_copy(bond->params.ad_actor_system, mac);
return 0;
+
+err:
+ netdev_err(bond->dev, "Invalid MAC address.\n");
+ return -EINVAL;
}
static int bond_option_ad_user_port_key_set(struct bonding *bond,
const struct bond_opt_value *newval)
{
- netdev_info(bond->dev, "Setting ad_user_port_key to (%llu)\n",
+ netdev_info(bond->dev, "Setting ad_user_port_key to %llu\n",
newval->value);
bond->params.ad_user_port_key = newval->value;
diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h
index d9cd192..6d6e502 100644
--- a/include/uapi/linux/if_link.h
+++ b/include/uapi/linux/if_link.h
@@ -417,6 +417,9 @@ enum {
IFLA_BOND_AD_LACP_RATE,
IFLA_BOND_AD_SELECT,
IFLA_BOND_AD_INFO,
+ IFLA_BOND_AD_ACTOR_SYS_PRIO,
+ IFLA_BOND_AD_USER_PORT_KEY,
+ IFLA_BOND_AD_ACTOR_SYSTEM,
__IFLA_BOND_MAX,
};
--
1.7.10.4
next prev parent reply other threads:[~2015-05-09 7:02 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-09 7:01 [PATCH linux v3 net-next 0/5] add netlink support for new lacp bonding parameters Jonathan Toppins
2015-05-09 7:01 ` [PATCH linux v3 net-next 1/4] bonding: Allow userspace to set actors' system_priority in AD system Jonathan Toppins
2015-05-09 7:01 ` [PATCH linux v3 net-next 2/4] bonding: Allow userspace to set actors' macaddr in an AD-system Jonathan Toppins
2015-05-09 7:01 ` [PATCH linux v3 net-next 3/4] bonding: Implement user key part of port_key in an AD system Jonathan Toppins
2015-05-09 7:01 ` Jonathan Toppins [this message]
2015-05-10 7:54 ` [PATCH linux v3 net-next 4/4] bonding: add netlink support for sys prio, actor sys mac, and port key Nikolay Aleksandrov
2015-05-09 7:01 ` [PATCH iproute2 v3 net-next] iplink_bond: add support for ad_actor and port_key options Jonathan Toppins
2015-05-21 22:27 ` Stephen Hemminger
2015-05-11 15:00 ` [PATCH linux v3 net-next 0/5] add netlink support for new lacp bonding parameters David Miller
2015-05-11 15:50 ` Jonathan Toppins
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c26a9459226784190a8503418c1375bfe1f90cae.1431150701.git.jtoppins@cumulusnetworks.com \
--to=jtoppins@cumulusnetworks.com \
--cc=davem@davemloft.net \
--cc=gospo@cumulusnetworks.com \
--cc=j.vosburgh@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=razor@blackwall.org \
--cc=shm@cumulusnetworks.com \
--cc=vfalico@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).