netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH 2/2] ARM: dts: dra72-evm-revc: enable irqs for dp83867 eth phys
@ 2017-01-06 20:55 Grygorii Strashko
  2017-01-06 21:54 ` Tony Lindgren
  0 siblings, 1 reply; 4+ messages in thread
From: Grygorii Strashko @ 2017-01-06 20:55 UTC (permalink / raw)
  To: Tony Lindgren, Mugunthan V N
  Cc: linux-omap, Sekhar Nori, netdev, Grygorii Strashko

TI DRA72-EVM Rev C has two DP83867 ethernet phys which support IRQ
generation in case of phy/link status changes. The INT/PWDN lines from both
DP83867 phys are wired to DRA7 gpio6.16, so reflect the same in DT.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
 arch/arm/boot/dts/dra72-evm-revc.dts | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/dra72-evm-revc.dts b/arch/arm/boot/dts/dra72-evm-revc.dts
index c3d939c..3ecac56 100644
--- a/arch/arm/boot/dts/dra72-evm-revc.dts
+++ b/arch/arm/boot/dts/dra72-evm-revc.dts
@@ -68,6 +68,8 @@
 		ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
 		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
 		ti,min-output-impedance;
+		interrupt-parent = <&gpio6>;
+		interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
 	};
 
 	dp83867_1: ethernet-phy@3 {
@@ -75,6 +77,8 @@
 		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
 		ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
 		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
-		ti,min-output-imepdance;
+		ti,min-output-impedance;
+		interrupt-parent = <&gpio6>;
+		interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
 	};
 };
-- 
2.10.1.dirty

^ permalink raw reply related	[flat|nested] 4+ messages in thread

* Re: [PATCH 2/2] ARM: dts: dra72-evm-revc: enable irqs for dp83867 eth phys
  2017-01-06 20:55 [PATCH 2/2] ARM: dts: dra72-evm-revc: enable irqs for dp83867 eth phys Grygorii Strashko
@ 2017-01-06 21:54 ` Tony Lindgren
  2017-01-09 19:25   ` Grygorii Strashko
  0 siblings, 1 reply; 4+ messages in thread
From: Tony Lindgren @ 2017-01-06 21:54 UTC (permalink / raw)
  To: Grygorii Strashko; +Cc: Mugunthan V N, linux-omap, Sekhar Nori, netdev

* Grygorii Strashko <grygorii.strashko@ti.com> [170106 12:56]:
> TI DRA72-EVM Rev C has two DP83867 ethernet phys which support IRQ
> generation in case of phy/link status changes. The INT/PWDN lines from both
> DP83867 phys are wired to DRA7 gpio6.16, so reflect the same in DT.

Hmm not seeing the patch 1/2 here.. Can this one be queued separately?
Is it for v4.11 or a fix?

Regards,

Tony

> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
> ---
>  arch/arm/boot/dts/dra72-evm-revc.dts | 6 +++++-
>  1 file changed, 5 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/dra72-evm-revc.dts b/arch/arm/boot/dts/dra72-evm-revc.dts
> index c3d939c..3ecac56 100644
> --- a/arch/arm/boot/dts/dra72-evm-revc.dts
> +++ b/arch/arm/boot/dts/dra72-evm-revc.dts
> @@ -68,6 +68,8 @@
>  		ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
>  		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
>  		ti,min-output-impedance;
> +		interrupt-parent = <&gpio6>;
> +		interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
>  	};
>  
>  	dp83867_1: ethernet-phy@3 {
> @@ -75,6 +77,8 @@
>  		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
>  		ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
>  		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
> -		ti,min-output-imepdance;
> +		ti,min-output-impedance;
> +		interrupt-parent = <&gpio6>;
> +		interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
>  	};
>  };
> -- 
> 2.10.1.dirty
> 

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [PATCH 2/2] ARM: dts: dra72-evm-revc: enable irqs for dp83867 eth phys
  2017-01-06 21:54 ` Tony Lindgren
@ 2017-01-09 19:25   ` Grygorii Strashko
  2017-01-12 22:27     ` Tony Lindgren
  0 siblings, 1 reply; 4+ messages in thread
From: Grygorii Strashko @ 2017-01-09 19:25 UTC (permalink / raw)
  To: Tony Lindgren; +Cc: Mugunthan V N, linux-omap, Sekhar Nori, netdev



On 01/06/2017 03:54 PM, Tony Lindgren wrote:
> * Grygorii Strashko <grygorii.strashko@ti.com> [170106 12:56]:
>> TI DRA72-EVM Rev C has two DP83867 ethernet phys which support IRQ
>> generation in case of phy/link status changes. The INT/PWDN lines from both
>> DP83867 phys are wired to DRA7 gpio6.16, so reflect the same in DT.
>
> Hmm not seeing the patch 1/2 here.. Can this one be queued separately?
> Is it for v4.11 or a fix?

This is for next (v4.11) and there is just a mistake in subj, Sry.

>> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
>> ---
>>  arch/arm/boot/dts/dra72-evm-revc.dts | 6 +++++-
>>  1 file changed, 5 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm/boot/dts/dra72-evm-revc.dts b/arch/arm/boot/dts/dra72-evm-revc.dts
>> index c3d939c..3ecac56 100644
>> --- a/arch/arm/boot/dts/dra72-evm-revc.dts
>> +++ b/arch/arm/boot/dts/dra72-evm-revc.dts
>> @@ -68,6 +68,8 @@
>>  		ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
>>  		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
>>  		ti,min-output-impedance;
>> +		interrupt-parent = <&gpio6>;
>> +		interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
>>  	};
>>
>>  	dp83867_1: ethernet-phy@3 {
>> @@ -75,6 +77,8 @@
>>  		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
>>  		ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
>>  		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
>> -		ti,min-output-imepdance;
>> +		ti,min-output-impedance;
>> +		interrupt-parent = <&gpio6>;
>> +		interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
>>  	};
>>  };
>> --
>> 2.10.1.dirty
>>

-- 
regards,
-grygorii

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [PATCH 2/2] ARM: dts: dra72-evm-revc: enable irqs for dp83867 eth phys
  2017-01-09 19:25   ` Grygorii Strashko
@ 2017-01-12 22:27     ` Tony Lindgren
  0 siblings, 0 replies; 4+ messages in thread
From: Tony Lindgren @ 2017-01-12 22:27 UTC (permalink / raw)
  To: Grygorii Strashko; +Cc: Mugunthan V N, linux-omap, Sekhar Nori, netdev

* Grygorii Strashko <grygorii.strashko@ti.com> [170109 11:26]:
> 
> 
> On 01/06/2017 03:54 PM, Tony Lindgren wrote:
> > * Grygorii Strashko <grygorii.strashko@ti.com> [170106 12:56]:
> > > TI DRA72-EVM Rev C has two DP83867 ethernet phys which support IRQ
> > > generation in case of phy/link status changes. The INT/PWDN lines from both
> > > DP83867 phys are wired to DRA7 gpio6.16, so reflect the same in DT.
> > 
> > Hmm not seeing the patch 1/2 here.. Can this one be queued separately?
> > Is it for v4.11 or a fix?
> 
> This is for next (v4.11) and there is just a mistake in subj, Sry.

OK applying into omap-for-v4.11/dt thanks.

Tony

^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2017-01-12 22:27 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-01-06 20:55 [PATCH 2/2] ARM: dts: dra72-evm-revc: enable irqs for dp83867 eth phys Grygorii Strashko
2017-01-06 21:54 ` Tony Lindgren
2017-01-09 19:25   ` Grygorii Strashko
2017-01-12 22:27     ` Tony Lindgren

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).