[PATCH net-next 0/3] net: stmmac: Improvements for -next

[PATCH net-next 0/3] net: stmmac: Improvements for -next

[Jose Abreu]

Misc improvements for stmmac.

Patch 1/3, adds the support for Split Header feature in GMAC4+ cores. This
was already available for XGMAC and now with this change it is supported in
all relevant cores.

Patch 2/3, adds the support for C45 MDIO callbacks in XGMAC cores.

Patch 3/3, removes the speed dependency in TC CBS callbacks because XGMAC3
supports CBS feature at speeds up to 10Gbps

---
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Jose Abreu <joabreu@synopsys.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: netdev@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---

Jose Abreu (3):
  net: stmmac: gmac4+: Add Split Header support
  net: stmmac: xgmac: Add C45 PHY support in the MDIO callbacks
  net: stmmac: tc: Remove the speed dependency

 drivers/net/ethernet/stmicro/stmmac/dwmac4.h       |  7 ++++
 drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c | 21 ++++++++--
 drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.h |  1 +
 drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c   | 19 +++++++++
 drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.h   |  1 +
 drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c  | 47 ++++++++++++++++++++--
 drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c    |  2 -
 7 files changed, 89 insertions(+), 9 deletions(-)

-- 
2.7.4

[PATCH net-next 1/3] net: stmmac: gmac4+: Add Split Header support

[Jose Abreu]

GMAC4+ cores also support the Split Header feature.

Add the support for Split Header feature in the RX path following the
same implementation logic that XGMAC followed.

Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>

---
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Jose Abreu <joabreu@synopsys.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: netdev@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
 drivers/net/ethernet/stmicro/stmmac/dwmac4.h       |  7 +++++++
 drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c | 21 ++++++++++++++++++---
 drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.h |  1 +
 drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c   | 19 +++++++++++++++++++
 drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.h   |  1 +
 5 files changed, 46 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4.h b/drivers/net/ethernet/stmicro/stmmac/dwmac4.h
index 07e97f45755d..2dc70d104161 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4.h
@@ -14,6 +14,7 @@
 
 /*  MAC registers */
 #define GMAC_CONFIG			0x00000000
+#define GMAC_EXT_CONFIG			0x00000004
 #define GMAC_PACKET_FILTER		0x00000008
 #define GMAC_HASH_TAB(x)		(0x10 + (x) * 4)
 #define GMAC_VLAN_TAG			0x00000050
@@ -188,6 +189,11 @@ enum power_event {
 #define GMAC_CONFIG_TE			BIT(1)
 #define GMAC_CONFIG_RE			BIT(0)
 
+/* MAC extended config */
+#define GMAC_CONFIG_HDSMS		GENMASK(22, 20)
+#define GMAC_CONFIG_HDSMS_SHIFT		20
+#define GMAC_CONFIG_HDSMS_256		(0x2 << GMAC_CONFIG_HDSMS_SHIFT)
+
 /* MAC HW features0 bitmap */
 #define GMAC_HW_FEAT_SAVLANINS		BIT(27)
 #define GMAC_HW_FEAT_ADDMAC		BIT(18)
@@ -211,6 +217,7 @@ enum power_event {
 #define GMAC_HW_HASH_TB_SZ		GENMASK(25, 24)
 #define GMAC_HW_FEAT_AVSEL		BIT(20)
 #define GMAC_HW_TSOEN			BIT(18)
+#define GMAC_HW_FEAT_SPHEN		BIT(17)
 #define GMAC_HW_ADDR64			GENMASK(15, 14)
 #define GMAC_HW_TXFIFOSIZE		GENMASK(10, 6)
 #define GMAC_HW_RXFIFOSIZE		GENMASK(4, 0)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c
index 707ab5eba8da..3e14da69f378 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c
@@ -83,9 +83,10 @@ static int dwmac4_wrback_get_rx_status(void *data, struct stmmac_extra_stats *x,
 	if (unlikely(rdes3 & RDES3_OWN))
 		return dma_own;
 
-	/* Verify rx error by looking at the last segment. */
-	if (likely(!(rdes3 & RDES3_LAST_DESCRIPTOR)))
+	if (unlikely(rdes3 & RDES3_CONTEXT_DESCRIPTOR))
 		return discard_frame;
+	if (likely(!(rdes3 & RDES3_LAST_DESCRIPTOR)))
+		return rx_not_ls;
 
 	if (unlikely(rdes3 & RDES3_ERROR_SUMMARY)) {
 		if (unlikely(rdes3 & RDES3_GIANT_PACKET))
@@ -188,7 +189,7 @@ static void dwmac4_set_tx_owner(struct dma_desc *p)
 
 static void dwmac4_set_rx_owner(struct dma_desc *p, int disable_rx_ic)
 {
-	p->des3 = cpu_to_le32(RDES3_OWN | RDES3_BUFFER1_VALID_ADDR);
+	p->des3 |= cpu_to_le32(RDES3_OWN | RDES3_BUFFER1_VALID_ADDR);
 
 	if (!disable_rx_ic)
 		p->des3 |= cpu_to_le32(RDES3_INT_ON_COMPLETION_EN);
@@ -492,6 +493,18 @@ static void dwmac4_set_vlan(struct dma_desc *p, u32 type)
 	p->des2 |= cpu_to_le32(type & TDES2_VLAN_TAG_MASK);
 }
 
+static int dwmac4_get_rx_header_len(struct dma_desc *p, unsigned int *len)
+{
+	*len = le32_to_cpu(p->des2) & RDES2_HL;
+	return 0;
+}
+
+static void dwmac4_set_sec_addr(struct dma_desc *p, dma_addr_t addr)
+{
+	p->des2 = cpu_to_le32(lower_32_bits(addr));
+	p->des3 = cpu_to_le32(upper_32_bits(addr) | RDES3_BUFFER2_VALID_ADDR);
+}
+
 const struct stmmac_desc_ops dwmac4_desc_ops = {
 	.tx_status = dwmac4_wrback_get_tx_status,
 	.rx_status = dwmac4_wrback_get_rx_status,
@@ -519,6 +532,8 @@ const struct stmmac_desc_ops dwmac4_desc_ops = {
 	.set_sarc = dwmac4_set_sarc,
 	.set_vlan_tag = dwmac4_set_vlan_tag,
 	.set_vlan = dwmac4_set_vlan,
+	.get_rx_header_len = dwmac4_get_rx_header_len,
+	.set_sec_addr = dwmac4_set_sec_addr,
 };
 
 const struct stmmac_mode_ops dwmac4_ring_mode_ops = {
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.h b/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.h
index 0d7b3bbcd5a7..6d92109dc9aa 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.h
@@ -109,6 +109,7 @@
 #define RDES2_L4_FILTER_MATCH		BIT(28)
 #define RDES2_L3_L4_FILT_NB_MATCH_MASK	GENMASK(27, 26)
 #define RDES2_L3_L4_FILT_NB_MATCH_SHIFT	26
+#define RDES2_HL			GENMASK(9, 0)
 
 /* RDES3 (write back format) */
 #define RDES3_PACKET_SIZE_MASK		GENMASK(14, 0)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
index b24c89572745..36a0af8bf89f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
@@ -368,6 +368,7 @@ static void dwmac4_get_hw_feature(void __iomem *ioaddr,
 	dma_cap->hash_tb_sz = (hw_cap & GMAC_HW_HASH_TB_SZ) >> 24;
 	dma_cap->av = (hw_cap & GMAC_HW_FEAT_AVSEL) >> 20;
 	dma_cap->tsoen = (hw_cap & GMAC_HW_TSOEN) >> 18;
+	dma_cap->sphen = (hw_cap & GMAC_HW_FEAT_SPHEN) >> 17;
 
 	dma_cap->addr64 = (hw_cap & GMAC_HW_ADDR64) >> 14;
 	switch (dma_cap->addr64) {
@@ -460,6 +461,22 @@ static void dwmac4_set_bfsize(void __iomem *ioaddr, int bfsize, u32 chan)
 	writel(value, ioaddr + DMA_CHAN_RX_CONTROL(chan));
 }
 
+static void dwmac4_enable_sph(void __iomem *ioaddr, bool en, u32 chan)
+{
+	u32 value = readl(ioaddr + GMAC_EXT_CONFIG);
+
+	value &= ~GMAC_CONFIG_HDSMS;
+	value |= GMAC_CONFIG_HDSMS_256; /* Segment max 256 bytes */
+	writel(value, ioaddr + GMAC_EXT_CONFIG);
+
+	value = readl(ioaddr + DMA_CHAN_CONTROL(chan));
+	if (en)
+		value |= DMA_CONTROL_SPH;
+	else
+		value &= ~DMA_CONTROL_SPH;
+	writel(value, ioaddr + DMA_CHAN_CONTROL(chan));
+}
+
 const struct stmmac_dma_ops dwmac4_dma_ops = {
 	.reset = dwmac4_dma_reset,
 	.init = dwmac4_dma_init,
@@ -486,6 +503,7 @@ const struct stmmac_dma_ops dwmac4_dma_ops = {
 	.enable_tso = dwmac4_enable_tso,
 	.qmode = dwmac4_qmode,
 	.set_bfsize = dwmac4_set_bfsize,
+	.enable_sph = dwmac4_enable_sph,
 };
 
 const struct stmmac_dma_ops dwmac410_dma_ops = {
@@ -514,4 +532,5 @@ const struct stmmac_dma_ops dwmac410_dma_ops = {
 	.enable_tso = dwmac4_enable_tso,
 	.qmode = dwmac4_qmode,
 	.set_bfsize = dwmac4_set_bfsize,
+	.enable_sph = dwmac4_enable_sph,
 };
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.h b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.h
index 5299fa1001a3..589931795847 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.h
@@ -110,6 +110,7 @@
 #define DMA_CHAN_STATUS(x)		(DMA_CHANX_BASE_ADDR(x) + 0x60)
 
 /* DMA Control X */
+#define DMA_CONTROL_SPH			BIT(24)
 #define DMA_CONTROL_MSS_MASK		GENMASK(13, 0)
 
 /* DMA Tx Channel X Control register defines */
-- 
2.7.4

[PATCH net-next 2/3] net: stmmac: xgmac: Add C45 PHY support in the MDIO callbacks

[Jose Abreu]

Add the support for C45 PHYs in the MDIO callbacks for XGMAC. This was
tested using Synopsys DesignWare XPCS.

Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>

---
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Jose Abreu <joabreu@synopsys.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: netdev@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 47 +++++++++++++++++++++--
 1 file changed, 43 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
index 40c42637ad75..143bffd28acf 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
@@ -41,6 +41,29 @@
 #define MII_XGMAC_BUSY			BIT(22)
 #define MII_XGMAC_MAX_C22ADDR		3
 #define MII_XGMAC_C22P_MASK		GENMASK(MII_XGMAC_MAX_C22ADDR, 0)
+#define MII_XGMAC_PA_SHIFT		16
+#define MII_XGMAC_DA_SHIFT		21
+
+static int stmmac_xgmac2_c45_format(struct stmmac_priv *priv, int phyaddr,
+				    int phyreg, u32 *hw_addr)
+{
+	unsigned int mii_data = priv->hw->mii.data;
+	u32 tmp;
+
+	/* Wait until any existing MII operation is complete */
+	if (readl_poll_timeout(priv->ioaddr + mii_data, tmp,
+			       !(tmp & MII_XGMAC_BUSY), 100, 10000))
+		return -EBUSY;
+
+	/* Set port as Clause 45 */
+	tmp = readl(priv->ioaddr + XGMAC_MDIO_C22P);
+	tmp &= ~BIT(phyaddr);
+	writel(tmp, priv->ioaddr + XGMAC_MDIO_C22P);
+
+	*hw_addr = (phyaddr << MII_XGMAC_PA_SHIFT) | (phyreg & 0xffff);
+	*hw_addr |= (phyreg >> MII_DEVADDR_C45_SHIFT) << MII_XGMAC_DA_SHIFT;
+	return 0;
+}
 
 static int stmmac_xgmac2_c22_format(struct stmmac_priv *priv, int phyaddr,
 				    int phyreg, u32 *hw_addr)
@@ -76,16 +99,22 @@ static int stmmac_xgmac2_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg)
 	int ret;
 
 	if (phyreg & MII_ADDR_C45) {
-		return -EOPNOTSUPP;
+		phyreg &= ~MII_ADDR_C45;
+
+		ret = stmmac_xgmac2_c45_format(priv, phyaddr, phyreg, &addr);
+		if (ret)
+			return ret;
 	} else {
 		ret = stmmac_xgmac2_c22_format(priv, phyaddr, phyreg, &addr);
 		if (ret)
 			return ret;
+
+		value |= MII_XGMAC_SADDR;
 	}
 
 	value |= (priv->clk_csr << priv->hw->mii.clk_csr_shift)
 		& priv->hw->mii.clk_csr_mask;
-	value |= MII_XGMAC_SADDR | MII_XGMAC_READ;
+	value |= MII_XGMAC_READ;
 
 	/* Wait until any existing MII operation is complete */
 	if (readl_poll_timeout(priv->ioaddr + mii_data, tmp,
@@ -116,16 +145,22 @@ static int stmmac_xgmac2_mdio_write(struct mii_bus *bus, int phyaddr,
 	int ret;
 
 	if (phyreg & MII_ADDR_C45) {
-		return -EOPNOTSUPP;
+		phyreg &= ~MII_ADDR_C45;
+
+		ret = stmmac_xgmac2_c45_format(priv, phyaddr, phyreg, &addr);
+		if (ret)
+			return ret;
 	} else {
 		ret = stmmac_xgmac2_c22_format(priv, phyaddr, phyreg, &addr);
 		if (ret)
 			return ret;
+
+		value |= MII_XGMAC_SADDR;
 	}
 
 	value |= (priv->clk_csr << priv->hw->mii.clk_csr_shift)
 		& priv->hw->mii.clk_csr_mask;
-	value |= phydata | MII_XGMAC_SADDR;
+	value |= phydata;
 	value |= MII_XGMAC_WRITE;
 
 	/* Wait until any existing MII operation is complete */
@@ -363,6 +398,10 @@ int stmmac_mdio_register(struct net_device *ndev)
 		goto bus_register_fail;
 	}
 
+	/* Looks like we need a dummy read for XGMAC only and C45 PHYs */
+	if (priv->plat->has_xgmac)
+		stmmac_xgmac2_mdio_read(new_bus, 0, MII_ADDR_C45);
+
 	if (priv->plat->phy_node || mdio_node)
 		goto bus_register_done;
 
-- 
2.7.4

[PATCH net-next 3/3] net: stmmac: tc: Remove the speed dependency

[Jose Abreu]

XGMAC3 supports full CBS features with speeds that can go up to 10G so
we can now remove the maximum speed check of CBS.

Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>

---
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Jose Abreu <joabreu@synopsys.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: netdev@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
index f9a9a9d82233..7d972e0fd2b0 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
@@ -321,8 +321,6 @@ static int tc_setup_cbs(struct stmmac_priv *priv,
 		return -EINVAL;
 	if (!priv->dma_cap.av)
 		return -EOPNOTSUPP;
-	if (priv->speed != SPEED_100 && priv->speed != SPEED_1000)
-		return -EOPNOTSUPP;
 
 	mode_to_use = priv->plat->tx_queues_cfg[queue].mode_to_use;
 	if (mode_to_use == MTL_QUEUE_DCB && qopt->enable) {
-- 
2.7.4

Re: [PATCH net-next 2/3] net: stmmac: xgmac: Add C45 PHY support in the MDIO callbacks

[Andrew Lunn]

On Wed, Oct 30, 2019 at 04:28:49PM +0100, Jose Abreu wrote:
> Add the support for C45 PHYs in the MDIO callbacks for XGMAC. This was
> tested using Synopsys DesignWare XPCS.
> 
> Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
> 
> ---
> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
> Cc: Alexandre Torgue <alexandre.torgue@st.com>
> Cc: Jose Abreu <joabreu@synopsys.com>
> Cc: "David S. Miller" <davem@davemloft.net>
> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
> Cc: netdev@vger.kernel.org
> Cc: linux-stm32@st-md-mailman.stormreply.com
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: linux-kernel@vger.kernel.org
> ---
>  drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 47 +++++++++++++++++++++--
>  1 file changed, 43 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
> index 40c42637ad75..143bffd28acf 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
> @@ -41,6 +41,29 @@
>  #define MII_XGMAC_BUSY			BIT(22)
>  #define MII_XGMAC_MAX_C22ADDR		3
>  #define MII_XGMAC_C22P_MASK		GENMASK(MII_XGMAC_MAX_C22ADDR, 0)
> +#define MII_XGMAC_PA_SHIFT		16
> +#define MII_XGMAC_DA_SHIFT		21
> +
> +static int stmmac_xgmac2_c45_format(struct stmmac_priv *priv, int phyaddr,
> +				    int phyreg, u32 *hw_addr)
> +{
> +	unsigned int mii_data = priv->hw->mii.data;
> +	u32 tmp;
> +
> +	/* Wait until any existing MII operation is complete */
> +	if (readl_poll_timeout(priv->ioaddr + mii_data, tmp,
> +			       !(tmp & MII_XGMAC_BUSY), 100, 10000))
> +		return -EBUSY;

Hi Jose

The stmmac_xgmac2_c22_format function does the same. Maybe the call
can be pulled out into stmmac_xgmac2_mdio_write() and
stmmac_xgmac2_mdio_read()?

	Andrew

Re: [PATCH net-next 0/3] net: stmmac: Improvements for -next

[David Miller]

From: Jose Abreu <Jose.Abreu@synopsys.com>
Date: Sun,  6 Oct 2019 13:17:11 +0200

> Improvements for -next. More info in commit logs.

Series applied but you have to do better than this in your header
postings.

This is the place where you must describe the high level purpose of
the patch series, what it is implementing, how it is implementing,
and why it is implmenting it that way.

Just "look at the commit logs" is not acceptable.

Thank you.

[PATCH net-next 0/3] net: stmmac: Improvements for -next

[Jose Abreu]

Improvements for -next. More info in commit logs.

---
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Jose Abreu <joabreu@synopsys.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: netdev@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---

Jose Abreu (3):
  net: stmmac: Fallback to VLAN Perfect filtering if HASH is not
    available
  net: stmmac: selftests: Add tests for VLAN Perfect Filtering
  net: stmmac: Implement L3/L4 Filters in GMAC4+

 drivers/net/ethernet/stmicro/stmmac/dwmac4.h       |  21 ++++
 drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c  | 118 ++++++++++++++++++++-
 drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c   |   1 +
 .../net/ethernet/stmicro/stmmac/dwxgmac2_core.c    |  17 ++-
 drivers/net/ethernet/stmicro/stmmac/hwif.h         |   2 +-
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c  |  18 ++--
 .../net/ethernet/stmicro/stmmac/stmmac_selftests.c | 114 +++++++++++++-------
 7 files changed, 245 insertions(+), 46 deletions(-)

-- 
2.7.4