[PATCH v2 00/29] docs: avoid using ReST :doc:`foo` tag

[PATCH v2 00/29] docs: avoid using ReST :doc:`foo` tag

[Mauro Carvalho Chehab]

(Maintainers bcc, to avoid too many recipient troubles)

As discussed at:
	https://lore.kernel.org/linux-doc/871r9k6rmy.fsf@meer.lwn.net/

It is better to avoid using :doc:`foo` to refer to Documentation/foo.rst, as the
automarkup.py extension should handle it automatically, on most cases.

There are a couple of exceptions to this rule:

1. when :doc:  tag is used to point to a kernel-doc DOC: markup;
2. when it is used with a named tag, e. g. :doc:`some name <foo>`;

On this series:

Patch 1 manually adjust the references inside driver-api/pm/devices.rst,
as there it uses :file:`foo` to refer to some Documentation/ files;

Patch 2 converts a table at Documentation/dev-tools/kunit/api/index.rst
into a list, carefully avoiding the 

The remaining patches convert the other occurrences via a replace script.
They were manually edited, in order to honour 80-columns where possible.

This series based on docs-next branch. In order to avoid merge conflicts,
I rebased it internally against yesterday's linux-next, dropping a patch
and a hunk that would have caused conflicts there.

I'll re-send the remaining patch (plus another patch) with conflicting
changes, together with any other doc:`filename` reference that might
still be upstream by 5.14-rc1.

---

v2:
   - dropped media patches (as I merged via my own tree);
   - removed one patch that would conflict at linux-next (adm1177.rst);
   - removed one hunk fron kunit patch that would also conflict at
     linux-next.

Mauro Carvalho Chehab (29):
  docs: devices.rst: better reference documentation docs
  docs: dev-tools: kunit: don't use a table for docs name
  docs: admin-guide: pm: avoid using ReST :doc:`foo` markup
  docs: admin-guide: hw-vuln: avoid using ReST :doc:`foo` markup
  docs: admin-guide: sysctl: avoid using ReST :doc:`foo` markup
  docs: block: biodoc.rst: avoid using ReST :doc:`foo` markup
  docs: bpf: bpf_lsm.rst: avoid using ReST :doc:`foo` markup
  docs: core-api: avoid using ReST :doc:`foo` markup
  docs: dev-tools: testing-overview.rst: avoid using ReST :doc:`foo`
    markup
  docs: dev-tools: kunit: avoid using ReST :doc:`foo` markup
  docs: devicetree: bindings: submitting-patches.rst: avoid using ReST
    :doc:`foo` markup
  docs: doc-guide: avoid using ReST :doc:`foo` markup
  docs: driver-api: avoid using ReST :doc:`foo` markup
  docs: driver-api: gpio: using-gpio.rst: avoid using ReST :doc:`foo`
    markup
  docs: driver-api: surface_aggregator: avoid using ReST :doc:`foo`
    markup
  docs: driver-api: usb: avoid using ReST :doc:`foo` markup
  docs: firmware-guide: acpi: avoid using ReST :doc:`foo` markup
  docs: i2c: avoid using ReST :doc:`foo` markup
  docs: kernel-hacking: hacking.rst: avoid using ReST :doc:`foo` markup
  docs: networking: devlink: avoid using ReST :doc:`foo` markup
  docs: PCI: endpoint: pci-endpoint-cfs.rst: avoid using ReST :doc:`foo`
    markup
  docs: PCI: pci.rst: avoid using ReST :doc:`foo` markup
  docs: process: submitting-patches.rst: avoid using ReST :doc:`foo`
    markup
  docs: security: landlock.rst: avoid using ReST :doc:`foo` markup
  docs: trace: coresight: coresight.rst: avoid using ReST :doc:`foo`
    markup
  docs: trace: ftrace.rst: avoid using ReST :doc:`foo` markup
  docs: userspace-api: landlock.rst: avoid using ReST :doc:`foo` markup
  docs: virt: kvm: s390-pv-boot.rst: avoid using ReST :doc:`foo` markup
  docs: x86: avoid using ReST :doc:`foo` markup

 .../PCI/endpoint/pci-endpoint-cfs.rst         |  2 +-
 Documentation/PCI/pci.rst                     |  6 +--
 .../special-register-buffer-data-sampling.rst |  3 +-
 Documentation/admin-guide/pm/intel_idle.rst   | 16 +++++---
 Documentation/admin-guide/pm/intel_pstate.rst |  9 +++--
 Documentation/admin-guide/sysctl/abi.rst      |  2 +-
 Documentation/admin-guide/sysctl/kernel.rst   | 37 ++++++++++---------
 Documentation/block/biodoc.rst                |  2 +-
 Documentation/bpf/bpf_lsm.rst                 | 13 ++++---
 .../core-api/bus-virt-phys-mapping.rst        |  2 +-
 Documentation/core-api/dma-api.rst            |  5 ++-
 Documentation/core-api/dma-isa-lpc.rst        |  2 +-
 Documentation/core-api/index.rst              |  4 +-
 Documentation/dev-tools/kunit/api/index.rst   |  8 ++--
 Documentation/dev-tools/kunit/faq.rst         |  2 +-
 Documentation/dev-tools/kunit/index.rst       | 14 +++----
 Documentation/dev-tools/kunit/start.rst       |  4 +-
 Documentation/dev-tools/kunit/tips.rst        |  5 ++-
 Documentation/dev-tools/kunit/usage.rst       |  8 ++--
 Documentation/dev-tools/testing-overview.rst  | 16 ++++----
 .../bindings/submitting-patches.rst           | 11 +++---
 Documentation/doc-guide/contributing.rst      |  8 ++--
 Documentation/driver-api/gpio/using-gpio.rst  |  4 +-
 Documentation/driver-api/ioctl.rst            |  2 +-
 Documentation/driver-api/pm/devices.rst       |  8 ++--
 .../surface_aggregator/clients/index.rst      |  3 +-
 .../surface_aggregator/internal.rst           | 15 ++++----
 .../surface_aggregator/overview.rst           |  6 ++-
 Documentation/driver-api/usb/dma.rst          |  6 +--
 .../acpi/dsd/data-node-references.rst         |  3 +-
 .../firmware-guide/acpi/dsd/graph.rst         |  2 +-
 .../firmware-guide/acpi/enumeration.rst       |  7 ++--
 Documentation/i2c/instantiating-devices.rst   |  2 +-
 Documentation/i2c/old-module-parameters.rst   |  3 +-
 Documentation/i2c/smbus-protocol.rst          |  4 +-
 Documentation/kernel-hacking/hacking.rst      |  4 +-
 .../networking/devlink/devlink-region.rst     |  2 +-
 .../networking/devlink/devlink-trap.rst       |  4 +-
 Documentation/process/submitting-patches.rst  | 32 ++++++++--------
 Documentation/security/landlock.rst           |  3 +-
 Documentation/trace/coresight/coresight.rst   |  8 ++--
 Documentation/trace/ftrace.rst                |  2 +-
 Documentation/userspace-api/landlock.rst      | 11 +++---
 Documentation/virt/kvm/s390-pv-boot.rst       |  2 +-
 Documentation/x86/boot.rst                    |  4 +-
 Documentation/x86/mtrr.rst                    |  2 +-
 46 files changed, 171 insertions(+), 147 deletions(-)

-- 
2.31.1

[PATCH v2 07/29] docs: bpf: bpf_lsm.rst: avoid using ReST :doc:`foo` markup

[Mauro Carvalho Chehab]

The :doc:`foo` tag is auto-generated via automarkup.py.
So, use the filename at the sources, instead of :doc:`foo`.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 Documentation/bpf/bpf_lsm.rst | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/Documentation/bpf/bpf_lsm.rst b/Documentation/bpf/bpf_lsm.rst
index 1c0a75a51d79..0dc3fb0d9544 100644
--- a/Documentation/bpf/bpf_lsm.rst
+++ b/Documentation/bpf/bpf_lsm.rst
@@ -20,10 +20,10 @@ LSM hook:
 Other LSM hooks which can be instrumented can be found in
 ``include/linux/lsm_hooks.h``.
 
-eBPF programs that use :doc:`/bpf/btf` do not need to include kernel headers
-for accessing information from the attached eBPF program's context. They can
-simply declare the structures in the eBPF program and only specify the fields
-that need to be accessed.
+eBPF programs that use Documentation/bpf/btf.rst do not need to include kernel
+headers for accessing information from the attached eBPF program's context.
+They can simply declare the structures in the eBPF program and only specify
+the fields that need to be accessed.
 
 .. code-block:: c
 
@@ -88,8 +88,9 @@ example:
 
 The ``__attribute__((preserve_access_index))`` is a clang feature that allows
 the BPF verifier to update the offsets for the access at runtime using the
-:doc:`/bpf/btf` information. Since the BPF verifier is aware of the types, it
-also validates all the accesses made to the various types in the eBPF program.
+Documentation/bpf/btf.rst information. Since the BPF verifier is aware of the
+types, it also validates all the accesses made to the various types in the
+eBPF program.
 
 Loading
 -------
-- 
2.31.1

[PATCH v2 20/29] docs: networking: devlink: avoid using ReST :doc:`foo` markup

[Mauro Carvalho Chehab]

The :doc:`foo` tag is auto-generated via automarkup.py.
So, use the filename at the sources, instead of :doc:`foo`.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 Documentation/networking/devlink/devlink-region.rst | 2 +-
 Documentation/networking/devlink/devlink-trap.rst   | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/networking/devlink/devlink-region.rst b/Documentation/networking/devlink/devlink-region.rst
index 3654c3e9658f..58fe95e9a49d 100644
--- a/Documentation/networking/devlink/devlink-region.rst
+++ b/Documentation/networking/devlink/devlink-region.rst
@@ -22,7 +22,7 @@ The major benefit to creating a region is to provide access to internal
 address regions that are otherwise inaccessible to the user.
 
 Regions may also be used to provide an additional way to debug complex error
-states, but see also :doc:`devlink-health`
+states, but see also Documentation/networking/devlink/devlink-health.rst
 
 Regions may optionally support capturing a snapshot on demand via the
 ``DEVLINK_CMD_REGION_NEW`` netlink message. A driver wishing to allow
diff --git a/Documentation/networking/devlink/devlink-trap.rst b/Documentation/networking/devlink/devlink-trap.rst
index 935b6397e8cf..efa5f7f42c88 100644
--- a/Documentation/networking/devlink/devlink-trap.rst
+++ b/Documentation/networking/devlink/devlink-trap.rst
@@ -495,8 +495,8 @@ help debug packet drops caused by these exceptions. The following list includes
 links to the description of driver-specific traps registered by various device
 drivers:
 
-  * :doc:`netdevsim`
-  * :doc:`mlxsw`
+  * Documentation/networking/devlink/netdevsim.rst
+  * Documentation/networking/devlink/mlxsw.rst
 
 .. _Generic-Packet-Trap-Groups:
 
-- 
2.31.1

Re: [PATCH v2 00/29] docs: avoid using ReST :doc:`foo` tag

[Jonathan Corbet]

Mauro Carvalho Chehab <mchehab+huawei@kernel.org> writes:

> (Maintainers bcc, to avoid too many recipient troubles)
>
> As discussed at:
> 	https://lore.kernel.org/linux-doc/871r9k6rmy.fsf@meer.lwn.net/
>
> It is better to avoid using :doc:`foo` to refer to Documentation/foo.rst, as the
> automarkup.py extension should handle it automatically, on most cases.

I've applied the set, thanks.

jon