From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To: Josua Mayer <josua@solid-run.com>, netdev@vger.kernel.org
Cc: alvaro.karsz@solid-run.com,
Michael Hennerich <michael.hennerich@analog.com>,
"David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Alexandru Ardelean <alexandru.ardelean@analog.com>
Subject: Re: [PATCH 1/3] dt: adin: document clk-out property
Date: Sun, 10 Apr 2022 16:21:14 +0200 [thread overview]
Message-ID: <d83be897-55ee-25d2-4048-586646cd7151@linaro.org> (raw)
In-Reply-To: <20220410104626.11517-2-josua@solid-run.com>
On 10/04/2022 12:46, Josua Mayer wrote:
> The ADIN1300 supports generating certain clocks on its GP_CLK pin.
> Add a DT property to specify the frequency.
>
> Due to the complexity of the clock configuration register, for now only
> 125MHz is documented.
Thank you for your patch. There is something to discuss/improve.
Adjust subject prefix to the subsystem (dt-bindings, not dt, missing net).
>
> Signed-off-by: Josua Mayer <josua@solid-run.com>
> ---
> Documentation/devicetree/bindings/net/adi,adin.yaml | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/net/adi,adin.yaml b/Documentation/devicetree/bindings/net/adi,adin.yaml
> index 1129f2b58e98..4e421bf5193d 100644
> --- a/Documentation/devicetree/bindings/net/adi,adin.yaml
> +++ b/Documentation/devicetree/bindings/net/adi,adin.yaml
> @@ -36,6 +36,11 @@ properties:
> enum: [ 4, 8, 12, 16, 20, 24 ]
> default: 8
>
> + adi,clk-out-frequency:
Use types defined by the dtschema, so "adi,clk-out-hz". Then no need for
type/ref.
> + description: Clock output frequency in Hertz.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [125000000]
If only one value, then "const: 125000000", but why do you need such
value in DT if it is always the same?
Best regards,
Krzysztof
next prev parent reply other threads:[~2022-04-10 14:21 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-10 10:46 [PATCH 0/3] adin: add support for 125MHz clk-out Josua Mayer
2022-04-10 10:46 ` [PATCH 1/3] dt: adin: document clk-out property Josua Mayer
2022-04-10 14:21 ` Krzysztof Kozlowski [this message]
2022-04-10 18:41 ` Josua Mayer
2022-04-10 19:01 ` Krzysztof Kozlowski
2022-04-11 7:42 ` Josua Mayer
2022-04-11 20:07 ` Jakub Kicinski
2022-04-11 20:59 ` Andrew Lunn
2022-04-11 21:33 ` Jakub Kicinski
2022-04-12 0:29 ` Andrew Lunn
2022-04-10 10:46 ` [PATCH 2/3] net: phy: adin: add support for 125MHz clk-out Josua Mayer
2022-04-10 10:46 ` [PATCH 3/3] ARM: dts: imx6qdl-sr-som: update phy configuration for som revision 1.9 Josua Mayer
2022-04-19 10:27 ` [PATCH v2 0/3] adin: add support for clock output Josua Mayer
2022-04-19 10:27 ` [PATCH v2 1/3] dt-bindings: net: adin: document phy clock output properties Josua Mayer
2022-04-21 12:24 ` Andrew Lunn
2022-04-19 10:27 ` [PATCH v2 2/3] net: phy: adin: add support for clock output Josua Mayer
2022-04-21 6:45 ` kernel test robot
2022-04-27 7:06 ` Josua Mayer
2022-04-19 10:27 ` [PATCH v2 3/3] ARM: dts: imx6qdl-sr-som: update phy configuration for som revision 1.9 Josua Mayer
2022-04-21 12:27 ` Andrew Lunn
2022-04-21 13:03 ` Russell King (Oracle)
2022-04-21 13:30 ` Andrew Lunn
2022-04-21 14:20 ` Russell King (Oracle)
2022-04-27 7:15 ` Josua Mayer
2022-05-09 16:01 ` Russell King (Oracle)
2022-04-28 8:28 ` [PATCH v3 0/3] adin: add support for clock output Josua Mayer
2022-04-28 8:28 ` [PATCH v3 1/3] dt-bindings: net: adin: document phy clock output properties Josua Mayer
2022-05-05 15:52 ` Josua Mayer
2022-05-05 20:24 ` Krzysztof Kozlowski
2022-05-08 9:57 ` Josua Mayer
2022-05-09 7:21 ` Krzysztof Kozlowski
2022-05-09 12:36 ` Josua Mayer
2022-04-28 8:28 ` [PATCH v3 2/3] net: phy: adin: add support for clock output Josua Mayer
2022-04-28 12:21 ` Andrew Lunn
2022-04-28 12:52 ` Josua Mayer
2022-04-28 23:34 ` Andrew Lunn
2022-04-28 8:28 ` [PATCH v3 3/3] ARM: dts: imx6qdl-sr-som: update phy configuration for som revision 1.9 Josua Mayer
2022-05-05 1:42 ` Shawn Guo
2022-05-09 14:36 ` [PATCH v4 0/3] adin: add support for clock output Josua Mayer
2022-05-09 14:36 ` [PATCH v4 1/3] dt-bindings: net: adin: document phy clock output properties Josua Mayer
2022-05-10 10:22 ` Krzysztof Kozlowski
2022-05-10 20:39 ` Jakub Kicinski
2022-05-11 12:58 ` [PATCH v4 1/3] dt-bindings: net: adin: document phy clock Michael Walle
2022-05-11 16:11 ` Jakub Kicinski
2022-05-11 17:10 ` Michael Walle
2022-05-11 19:42 ` Jakub Kicinski
2022-05-12 21:20 ` Michael Walle
2022-05-12 22:44 ` Jakub Kicinski
2022-05-15 7:16 ` Josua Mayer
2022-05-16 17:43 ` Jakub Kicinski
2022-05-16 19:48 ` Josua Mayer
2022-05-16 22:40 ` Jakub Kicinski
2022-05-17 8:50 ` Josua Mayer
2022-05-09 14:36 ` [PATCH v4 2/3] net: phy: adin: add support for clock output Josua Mayer
2022-05-09 14:36 ` [PATCH v4 3/3] ARM: dts: imx6qdl-sr-som: update phy configuration for som revision 1.9 Josua Mayer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d83be897-55ee-25d2-4048-586646cd7151@linaro.org \
--to=krzysztof.kozlowski@linaro.org \
--cc=alexandru.ardelean@analog.com \
--cc=alvaro.karsz@solid-run.com \
--cc=davem@davemloft.net \
--cc=josua@solid-run.com \
--cc=krzk+dt@kernel.org \
--cc=kuba@kernel.org \
--cc=michael.hennerich@analog.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).