* KSZ8863 ethernet PHY support question
@ 2019-09-03 13:59 HOLTZ Matthieu
2019-09-04 15:44 ` Andrew Lunn
0 siblings, 1 reply; 2+ messages in thread
From: HOLTZ Matthieu @ 2019-09-03 13:59 UTC (permalink / raw)
To: netdev; +Cc: matthieu.holtz
Hello,
I’d like to use a switch phy KSZ8863 with an NXP i.mx8mm MPU (new motherboard dev) and a kernel 4.14.x but I am a bit lost regarding the driver support.
Is the Phy supported by the driver under linux/drivers/net/phy/micrel.c and what about the switch configuration, is it implemented in the DSA subsystem ?
KR,
Matthieu H
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: KSZ8863 ethernet PHY support question
2019-09-03 13:59 KSZ8863 ethernet PHY support question HOLTZ Matthieu
@ 2019-09-04 15:44 ` Andrew Lunn
0 siblings, 0 replies; 2+ messages in thread
From: Andrew Lunn @ 2019-09-04 15:44 UTC (permalink / raw)
To: HOLTZ Matthieu; +Cc: netdev, matthieu.holtz
On Tue, Sep 03, 2019 at 01:59:18PM +0000, HOLTZ Matthieu wrote:
> Hello,
>
> I’d like to use a switch phy KSZ8863 with an NXP i.mx8mm MPU (new motherboard dev) and a kernel 4.14.x but I am a bit lost regarding the driver support.
>
> Is the Phy supported by the driver under linux/drivers/net/phy/micrel.c and what about the switch configuration, is it implemented in the DSA subsystem ?
Hi Matthieu
There was a set of RFC patches for the switch posted a while ago:
https://www.spinics.net/lists/netdev/msg569654.html
You might want to talk to the author and help get them merged.
Andrew
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-09-04 15:44 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-09-03 13:59 KSZ8863 ethernet PHY support question HOLTZ Matthieu
2019-09-04 15:44 ` Andrew Lunn
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).