* [Nouveau] [PATCH v2 01/20] drm/dp: Fixup kernel docs for struct drm_dp_aux
2021-03-26 20:37 [Nouveau] [PATCH v2 00/20] drm: Use new DRM printk funcs (like drm_dbg_*()) in DP helpers Lyude Paul
@ 2021-03-26 20:37 ` Lyude Paul
2021-03-26 20:37 ` [Nouveau] [PATCH v2 02/20] drm/tegra: Don't register DP AUX channels before connectors Lyude Paul
` (19 subsequent siblings)
20 siblings, 0 replies; 32+ messages in thread
From: Lyude Paul @ 2021-03-26 20:37 UTC (permalink / raw)
To: nouveau, dri-devel, amd-gfx, intel-gfx
Cc: David Airlie, Randy Dunlap, Maarten Lankhorst, open list,
Maxime Ripard, Daniel Vetter
* Make sure that struct members are referred to using @, otherwise they
won't be formatted as such
* Make sure to refer to other struct types using & so they link back to
each struct's definition
* Make sure to precede constant values with % so they're formatted
correctly
Signed-off-by: Lyude Paul <lyude@redhat.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
---
include/drm/drm_dp_helper.h | 44 ++++++++++++++++++-------------------
1 file changed, 22 insertions(+), 22 deletions(-)
diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
index 632ad7faa006..5efa0d329b67 100644
--- a/include/drm/drm_dp_helper.h
+++ b/include/drm/drm_dp_helper.h
@@ -1844,34 +1844,34 @@ struct drm_dp_aux_cec {
* @crc_count: counter of captured frame CRCs
* @transfer: transfers a message representing a single AUX transaction
*
- * The .dev field should be set to a pointer to the device that implements
- * the AUX channel.
+ * The @dev field should be set to a pointer to the device that implements the
+ * AUX channel.
*
- * The .name field may be used to specify the name of the I2C adapter. If set to
- * NULL, dev_name() of .dev will be used.
+ * The @name field may be used to specify the name of the I2C adapter. If set to
+ * %NULL, dev_name() of @dev will be used.
*
- * Drivers provide a hardware-specific implementation of how transactions
- * are executed via the .transfer() function. A pointer to a drm_dp_aux_msg
+ * Drivers provide a hardware-specific implementation of how transactions are
+ * executed via the @transfer() function. A pointer to a &drm_dp_aux_msg
* structure describing the transaction is passed into this function. Upon
- * success, the implementation should return the number of payload bytes
- * that were transferred, or a negative error-code on failure. Helpers
- * propagate errors from the .transfer() function, with the exception of
- * the -EBUSY error, which causes a transaction to be retried. On a short,
- * helpers will return -EPROTO to make it simpler to check for failure.
+ * success, the implementation should return the number of payload bytes that
+ * were transferred, or a negative error-code on failure. Helpers propagate
+ * errors from the @transfer() function, with the exception of the %-EBUSY
+ * error, which causes a transaction to be retried. On a short, helpers will
+ * return %-EPROTO to make it simpler to check for failure.
*
* An AUX channel can also be used to transport I2C messages to a sink. A
- * typical application of that is to access an EDID that's present in the
- * sink device. The .transfer() function can also be used to execute such
- * transactions. The drm_dp_aux_register() function registers an I2C
- * adapter that can be passed to drm_probe_ddc(). Upon removal, drivers
- * should call drm_dp_aux_unregister() to remove the I2C adapter.
- * The I2C adapter uses long transfers by default; if a partial response is
- * received, the adapter will drop down to the size given by the partial
- * response for this transaction only.
+ * typical application of that is to access an EDID that's present in the sink
+ * device. The @transfer() function can also be used to execute such
+ * transactions. The drm_dp_aux_register() function registers an I2C adapter
+ * that can be passed to drm_probe_ddc(). Upon removal, drivers should call
+ * drm_dp_aux_unregister() to remove the I2C adapter. The I2C adapter uses long
+ * transfers by default; if a partial response is received, the adapter will
+ * drop down to the size given by the partial response for this transaction
+ * only.
*
- * Note that the aux helper code assumes that the .transfer() function
- * only modifies the reply field of the drm_dp_aux_msg structure. The
- * retry logic and i2c helpers assume this is the case.
+ * Note that the aux helper code assumes that the @transfer() function only
+ * modifies the reply field of the &drm_dp_aux_msg structure. The retry logic
+ * and i2c helpers assume this is the case.
*/
struct drm_dp_aux {
const char *name;
--
2.30.2
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply related [flat|nested] 32+ messages in thread* [Nouveau] [PATCH v2 02/20] drm/tegra: Don't register DP AUX channels before connectors
2021-03-26 20:37 [Nouveau] [PATCH v2 00/20] drm: Use new DRM printk funcs (like drm_dbg_*()) in DP helpers Lyude Paul
2021-03-26 20:37 ` [Nouveau] [PATCH v2 01/20] drm/dp: Fixup kernel docs for struct drm_dp_aux Lyude Paul
@ 2021-03-26 20:37 ` Lyude Paul
2021-03-29 6:51 ` Thierry Reding
2021-03-26 20:37 ` [Nouveau] [PATCH v2 03/20] drm/bridge/cdns-mhdp8546: Register DP aux channel with userspace Lyude Paul
` (18 subsequent siblings)
20 siblings, 1 reply; 32+ messages in thread
From: Lyude Paul @ 2021-03-26 20:37 UTC (permalink / raw)
To: nouveau, dri-devel, amd-gfx, intel-gfx
Cc: David Airlie, open list, Thierry Reding, Daniel Vetter,
open list:DRM DRIVERS FOR NVIDIA TEGRA
As pointed out by the documentation for drm_dp_aux_register(),
drm_dp_aux_init() should be used in situations where the AUX channel for a
display driver can potentially be registered before it's respective DRM
driver. This is the case with Tegra, since the DP aux channel exists as a
platform device instead of being a grandchild of the DRM device.
Since we're about to add a backpointer to a DP AUX channel's respective DRM
device, let's fix this so that we don't potentially allow userspace to use
the AUX channel before we've associated it with it's DRM connector.
Signed-off-by: Lyude Paul <lyude@redhat.com>
---
drivers/gpu/drm/tegra/dpaux.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/tegra/dpaux.c b/drivers/gpu/drm/tegra/dpaux.c
index 105fb9cdbb3b..ea56c6ec25e4 100644
--- a/drivers/gpu/drm/tegra/dpaux.c
+++ b/drivers/gpu/drm/tegra/dpaux.c
@@ -534,9 +534,7 @@ static int tegra_dpaux_probe(struct platform_device *pdev)
dpaux->aux.transfer = tegra_dpaux_transfer;
dpaux->aux.dev = &pdev->dev;
- err = drm_dp_aux_register(&dpaux->aux);
- if (err < 0)
- return err;
+ drm_dp_aux_init(&dpaux->aux);
/*
* Assume that by default the DPAUX/I2C pads will be used for HDMI,
@@ -589,8 +587,6 @@ static int tegra_dpaux_remove(struct platform_device *pdev)
pm_runtime_put_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
- drm_dp_aux_unregister(&dpaux->aux);
-
mutex_lock(&dpaux_lock);
list_del(&dpaux->list);
mutex_unlock(&dpaux_lock);
@@ -723,6 +719,10 @@ int drm_dp_aux_attach(struct drm_dp_aux *aux, struct tegra_output *output)
unsigned long timeout;
int err;
+ err = drm_dp_aux_register(aux);
+ if (err < 0)
+ return err;
+
output->connector.polled = DRM_CONNECTOR_POLL_HPD;
dpaux->output = output;
@@ -760,6 +760,7 @@ int drm_dp_aux_detach(struct drm_dp_aux *aux)
unsigned long timeout;
int err;
+ drm_dp_aux_unregister(aux);
disable_irq(dpaux->irq);
if (dpaux->output->panel) {
--
2.30.2
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply related [flat|nested] 32+ messages in thread* Re: [Nouveau] [PATCH v2 02/20] drm/tegra: Don't register DP AUX channels before connectors
2021-03-26 20:37 ` [Nouveau] [PATCH v2 02/20] drm/tegra: Don't register DP AUX channels before connectors Lyude Paul
@ 2021-03-29 6:51 ` Thierry Reding
0 siblings, 0 replies; 32+ messages in thread
From: Thierry Reding @ 2021-03-29 6:51 UTC (permalink / raw)
To: Lyude Paul
Cc: David Airlie, nouveau, intel-gfx, open list, amd-gfx, dri-devel,
Daniel Vetter, open list:DRM DRIVERS FOR NVIDIA TEGRA
[-- Attachment #1.1: Type: text/plain, Size: 868 bytes --]
On Fri, Mar 26, 2021 at 04:37:49PM -0400, Lyude Paul wrote:
> As pointed out by the documentation for drm_dp_aux_register(),
> drm_dp_aux_init() should be used in situations where the AUX channel for a
> display driver can potentially be registered before it's respective DRM
> driver. This is the case with Tegra, since the DP aux channel exists as a
> platform device instead of being a grandchild of the DRM device.
>
> Since we're about to add a backpointer to a DP AUX channel's respective DRM
> device, let's fix this so that we don't potentially allow userspace to use
> the AUX channel before we've associated it with it's DRM connector.
>
> Signed-off-by: Lyude Paul <lyude@redhat.com>
> ---
> drivers/gpu/drm/tegra/dpaux.c | 11 ++++++-----
> 1 file changed, 6 insertions(+), 5 deletions(-)
Acked-by: Thierry Reding <treding@nvidia.com>
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
[-- Attachment #2: Type: text/plain, Size: 154 bytes --]
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply [flat|nested] 32+ messages in thread
* [Nouveau] [PATCH v2 03/20] drm/bridge/cdns-mhdp8546: Register DP aux channel with userspace
2021-03-26 20:37 [Nouveau] [PATCH v2 00/20] drm: Use new DRM printk funcs (like drm_dbg_*()) in DP helpers Lyude Paul
2021-03-26 20:37 ` [Nouveau] [PATCH v2 01/20] drm/dp: Fixup kernel docs for struct drm_dp_aux Lyude Paul
2021-03-26 20:37 ` [Nouveau] [PATCH v2 02/20] drm/tegra: Don't register DP AUX channels before connectors Lyude Paul
@ 2021-03-26 20:37 ` Lyude Paul
2021-03-26 20:37 ` [Nouveau] [PATCH v2 04/20] drm/nouveau/kms/nv50-: Move AUX adapter reg to connector late register/early unregister Lyude Paul
` (17 subsequent siblings)
20 siblings, 0 replies; 32+ messages in thread
From: Lyude Paul @ 2021-03-26 20:37 UTC (permalink / raw)
To: nouveau, dri-devel, amd-gfx, intel-gfx
Cc: Jernej Skrabec, Jonas Karlman, David Airlie, Neil Armstrong,
open list, Robert Foss, Julia Lawall, Andrzej Hajda,
Tomi Valkeinen, Laurent Pinchart, Daniel Vetter, Swapnil Jakhade
Just adds some missing calls to
drm_dp_aux_register()/drm_dp_aux_unregister() for when we attach/detach the
bridge.
Signed-off-by: Lyude Paul <lyude@redhat.com>
---
drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c b/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c
index 989a05bc8197..d966a33743b5 100644
--- a/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c
+++ b/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c
@@ -1674,10 +1674,14 @@ static int cdns_mhdp_attach(struct drm_bridge *bridge,
dev_dbg(mhdp->dev, "%s\n", __func__);
+ ret = drm_dp_aux_register(&mhdp->aux);
+ if (ret < 0)
+ return ret;
+
if (!(flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR)) {
ret = cdns_mhdp_connector_init(mhdp);
if (ret)
- return ret;
+ goto aux_unregister;
}
spin_lock(&mhdp->start_lock);
@@ -1693,6 +1697,9 @@ static int cdns_mhdp_attach(struct drm_bridge *bridge,
mhdp->regs + CDNS_APB_INT_MASK);
return 0;
+aux_unregister:
+ drm_dp_aux_unregister(&mhdp->aux);
+ return ret;
}
static void cdns_mhdp_configure_video(struct cdns_mhdp_device *mhdp,
@@ -2025,6 +2032,8 @@ static void cdns_mhdp_detach(struct drm_bridge *bridge)
dev_dbg(mhdp->dev, "%s\n", __func__);
+ drm_dp_aux_unregister(&mhdp->aux);
+
spin_lock(&mhdp->start_lock);
mhdp->bridge_attached = false;
--
2.30.2
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply related [flat|nested] 32+ messages in thread* [Nouveau] [PATCH v2 04/20] drm/nouveau/kms/nv50-: Move AUX adapter reg to connector late register/early unregister
2021-03-26 20:37 [Nouveau] [PATCH v2 00/20] drm: Use new DRM printk funcs (like drm_dbg_*()) in DP helpers Lyude Paul
` (2 preceding siblings ...)
2021-03-26 20:37 ` [Nouveau] [PATCH v2 03/20] drm/bridge/cdns-mhdp8546: Register DP aux channel with userspace Lyude Paul
@ 2021-03-26 20:37 ` Lyude Paul
2021-03-26 20:37 ` [Nouveau] [PATCH v2 05/20] drm/dp: Add backpointer to drm_device in drm_dp_aux Lyude Paul
` (16 subsequent siblings)
20 siblings, 0 replies; 32+ messages in thread
From: Lyude Paul @ 2021-03-26 20:37 UTC (permalink / raw)
To: nouveau, dri-devel, amd-gfx, intel-gfx
Cc: David Airlie, Ben Skeggs, Daniel Vetter, open list
Since AUX adapters on nouveau have their respective DRM connectors as
parents, we need to make sure that we register then after their connectors.
Signed-off-by: Lyude Paul <lyude@redhat.com>
---
drivers/gpu/drm/nouveau/nouveau_connector.c | 26 ++++++++++++++-------
1 file changed, 18 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c
index 61e6d7412505..bfce762adcf0 100644
--- a/drivers/gpu/drm/nouveau/nouveau_connector.c
+++ b/drivers/gpu/drm/nouveau/nouveau_connector.c
@@ -905,13 +905,29 @@ nouveau_connector_late_register(struct drm_connector *connector)
int ret;
ret = nouveau_backlight_init(connector);
+ if (ret)
+ return ret;
+
+ if (connector->connector_type == DRM_MODE_CONNECTOR_eDP ||
+ connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort) {
+ ret = drm_dp_aux_register(&nouveau_connector(connector)->aux);
+ if (ret)
+ goto backlight_fini;
+ }
+ return 0;
+backlight_fini:
+ nouveau_backlight_fini(connector);
return ret;
}
static void
nouveau_connector_early_unregister(struct drm_connector *connector)
{
+ if (connector->connector_type == DRM_MODE_CONNECTOR_eDP ||
+ connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort)
+ drm_dp_aux_unregister(&nouveau_connector(connector)->aux);
+
nouveau_backlight_fini(connector);
}
@@ -1343,14 +1359,8 @@ nouveau_connector_create(struct drm_device *dev,
snprintf(aux_name, sizeof(aux_name), "sor-%04x-%04x",
dcbe->hasht, dcbe->hashm);
nv_connector->aux.name = kstrdup(aux_name, GFP_KERNEL);
- ret = drm_dp_aux_register(&nv_connector->aux);
- if (ret) {
- NV_ERROR(drm, "failed to register aux channel\n");
- kfree(nv_connector);
- return ERR_PTR(ret);
- }
- funcs = &nouveau_connector_funcs;
- break;
+ drm_dp_aux_init(&nv_connector->aux);
+ fallthrough;
default:
funcs = &nouveau_connector_funcs;
break;
--
2.30.2
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply related [flat|nested] 32+ messages in thread* [Nouveau] [PATCH v2 05/20] drm/dp: Add backpointer to drm_device in drm_dp_aux
2021-03-26 20:37 [Nouveau] [PATCH v2 00/20] drm: Use new DRM printk funcs (like drm_dbg_*()) in DP helpers Lyude Paul
` (3 preceding siblings ...)
2021-03-26 20:37 ` [Nouveau] [PATCH v2 04/20] drm/nouveau/kms/nv50-: Move AUX adapter reg to connector late register/early unregister Lyude Paul
@ 2021-03-26 20:37 ` Lyude Paul
2021-03-29 7:08 ` Thierry Reding
2021-04-01 13:31 ` Jani Nikula
2021-03-26 20:37 ` [Nouveau] [PATCH v2 06/20] drm/dp: Clarify DP AUX registration time Lyude Paul
` (15 subsequent siblings)
20 siblings, 2 replies; 32+ messages in thread
From: Lyude Paul @ 2021-03-26 20:37 UTC (permalink / raw)
To: nouveau, dri-devel, amd-gfx, intel-gfx
Cc: Neil Armstrong, David Airlie, Guido Günther,
Joonas Lahtinen, Oleg Vasilev, Andrzej Hajda, Thierry Reding,
Laurent Pinchart, Sam Ravnborg, Ville Syrjälä,
Marek Szyprowski, Tomi Valkeinen, Rodrigo Siqueira, Michal Simek,
Vasily Khoruzhick, Jerry (Fangzhi) Zuo, Luben Tuikov, Ben Skeggs,
Swapnil Jakhade, Harry Wentland, Imre Deak,
moderated list:ARM/ZYNQ ARCHITECTURE, Daniel Vetter,
Jonas Karlman, Leo Li, Lucas De Marchi, Maarten Lankhorst,
Maxime Ripard, Joe Perches, Yuti Amonkar, Jani Nikula,
Rodrigo Vivi, open list:DRM DRIVERS FOR NVIDIA TEGRA,
Mikita Lipski, Sean Paul,
open list:DRM DRIVER FOR MSM ADRENO GPU, Matt Roper,
Jernej Skrabec, Chris Park, Eryk Brol, Hyun Kwon, Jyri Sarha,
open list, Robert Foss, Julia Lawall, Rob Clark, Boris Brezillon,
Alex Deucher, Andy Yan, open list:DRM DRIVER FOR MSM ADRENO GPU,
Christian König
This is something that we've wanted for a while now: the ability to
actually look up the respective drm_device for a given drm_dp_aux struct.
This will also allow us to transition over to using the drm_dbg_*() helpers
for debug message printing, as we'll finally have a drm_device to reference
for doing so.
Note that there is one limitation with this - because some DP AUX adapters
exist as platform devices which are initialized independently of their
respective DRM devices, one cannot rely on drm_dp_aux->drm_dev to always be
non-NULL until drm_dp_aux_register() has been called. We make sure to point
this out in the documentation for struct drm_dp_aux.
Signed-off-by: Lyude Paul <lyude@redhat.com>
---
drivers/gpu/drm/amd/amdgpu/atombios_dp.c | 1 +
.../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c | 1 +
drivers/gpu/drm/bridge/analogix/analogix-anx6345.c | 1 +
drivers/gpu/drm/bridge/analogix/analogix-anx78xx.c | 1 +
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 1 +
drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c | 1 +
drivers/gpu/drm/bridge/tc358767.c | 1 +
drivers/gpu/drm/bridge/ti-sn65dsi86.c | 1 +
drivers/gpu/drm/drm_dp_aux_dev.c | 6 ++++++
drivers/gpu/drm/drm_dp_mst_topology.c | 1 +
drivers/gpu/drm/i915/display/intel_dp_aux.c | 1 +
drivers/gpu/drm/msm/edp/edp.h | 3 +--
drivers/gpu/drm/msm/edp/edp_aux.c | 5 +++--
drivers/gpu/drm/msm/edp/edp_ctrl.c | 2 +-
drivers/gpu/drm/nouveau/nouveau_connector.c | 1 +
drivers/gpu/drm/radeon/atombios_dp.c | 1 +
drivers/gpu/drm/tegra/dpaux.c | 1 +
drivers/gpu/drm/xlnx/zynqmp_dp.c | 1 +
include/drm/drm_dp_helper.h | 9 ++++++++-
19 files changed, 33 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/atombios_dp.c b/drivers/gpu/drm/amd/amdgpu/atombios_dp.c
index a3ba9ca11e98..6d35da65e09f 100644
--- a/drivers/gpu/drm/amd/amdgpu/atombios_dp.c
+++ b/drivers/gpu/drm/amd/amdgpu/atombios_dp.c
@@ -188,6 +188,7 @@ void amdgpu_atombios_dp_aux_init(struct amdgpu_connector *amdgpu_connector)
{
amdgpu_connector->ddc_bus->rec.hpd = amdgpu_connector->hpd.hpd;
amdgpu_connector->ddc_bus->aux.transfer = amdgpu_atombios_dp_aux_transfer;
+ amdgpu_connector->ddc_bus->aux.drm_dev = amdgpu_connector->base.dev;
drm_dp_aux_init(&amdgpu_connector->ddc_bus->aux);
amdgpu_connector->ddc_bus->has_aux = true;
}
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
index 73cdb9fe981a..b8b69c33fb2b 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_mst_types.c
@@ -434,6 +434,7 @@ void amdgpu_dm_initialize_dp_connector(struct amdgpu_display_manager *dm,
link_index);
aconnector->dm_dp_aux.aux.transfer = dm_dp_aux_transfer;
aconnector->dm_dp_aux.ddc_service = aconnector->dc_link->ddc;
+ aconnector->dm_dp_aux.aux.drm_dev = dm->ddev;
drm_dp_aux_init(&aconnector->dm_dp_aux.aux);
drm_dp_cec_register_connector(&aconnector->dm_dp_aux.aux,
diff --git a/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c b/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c
index aa6cda458eb9..e33cd077595a 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c
@@ -537,6 +537,7 @@ static int anx6345_bridge_attach(struct drm_bridge *bridge,
/* Register aux channel */
anx6345->aux.name = "DP-AUX";
anx6345->aux.dev = &anx6345->client->dev;
+ anx6345->aux.drm_dev = bridge->dev;
anx6345->aux.transfer = anx6345_aux_transfer;
err = drm_dp_aux_register(&anx6345->aux);
diff --git a/drivers/gpu/drm/bridge/analogix/analogix-anx78xx.c b/drivers/gpu/drm/bridge/analogix/analogix-anx78xx.c
index f20558618220..5e6a0ed39199 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix-anx78xx.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix-anx78xx.c
@@ -905,6 +905,7 @@ static int anx78xx_bridge_attach(struct drm_bridge *bridge,
/* Register aux channel */
anx78xx->aux.name = "DP-AUX";
anx78xx->aux.dev = &anx78xx->client->dev;
+ anx78xx->aux.drm_dev = bridge->dev;
anx78xx->aux.transfer = anx78xx_aux_transfer;
err = drm_dp_aux_register(&anx78xx->aux);
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index f115233b1cb9..550814ca2139 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -1765,6 +1765,7 @@ int analogix_dp_bind(struct analogix_dp_device *dp, struct drm_device *drm_dev)
dp->aux.name = "DP-AUX";
dp->aux.transfer = analogix_dpaux_transfer;
dp->aux.dev = dp->dev;
+ dp->aux.drm_dev = drm_dev;
ret = drm_dp_aux_register(&dp->aux);
if (ret)
diff --git a/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c b/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c
index d966a33743b5..fe821ad628ec 100644
--- a/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c
+++ b/drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c
@@ -1674,6 +1674,7 @@ static int cdns_mhdp_attach(struct drm_bridge *bridge,
dev_dbg(mhdp->dev, "%s\n", __func__);
+ mhdp->aux.drm_dev = bridge->dev;
ret = drm_dp_aux_register(&mhdp->aux);
if (ret < 0)
return ret;
diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c
index da89922721ed..23a6f90b694b 100644
--- a/drivers/gpu/drm/bridge/tc358767.c
+++ b/drivers/gpu/drm/bridge/tc358767.c
@@ -1414,6 +1414,7 @@ static int tc_bridge_attach(struct drm_bridge *bridge,
if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR)
return 0;
+ tc->aux.drm_dev = drm;
ret = drm_dp_aux_register(&tc->aux);
if (ret < 0)
return ret;
diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi86.c b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
index 88df4dd0f39d..8e24272bbf00 100644
--- a/drivers/gpu/drm/bridge/ti-sn65dsi86.c
+++ b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
@@ -362,6 +362,7 @@ static int ti_sn_bridge_attach(struct drm_bridge *bridge,
return -EINVAL;
}
+ pdata->aux.drm_dev = bridge->dev;
ret = drm_dp_aux_register(&pdata->aux);
if (ret < 0) {
drm_err(bridge->dev, "Failed to register DP AUX channel: %d\n", ret);
diff --git a/drivers/gpu/drm/drm_dp_aux_dev.c b/drivers/gpu/drm/drm_dp_aux_dev.c
index e25181bf2c48..06b374cae956 100644
--- a/drivers/gpu/drm/drm_dp_aux_dev.c
+++ b/drivers/gpu/drm/drm_dp_aux_dev.c
@@ -278,6 +278,12 @@ void drm_dp_aux_unregister_devnode(struct drm_dp_aux *aux)
if (!aux_dev) /* attach must have failed */
return;
+ /*
+ * As some AUX adapters may exist as platform devices which outlive their respective DRM
+ * devices, we clear drm_dev to ensure that we never accidentally reference a stale pointer
+ */
+ aux->drm_dev = NULL;
+
mutex_lock(&aux_idr_mutex);
idr_remove(&aux_idr, aux_dev->index);
mutex_unlock(&aux_idr_mutex);
diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c
index 42a0c6888c33..1a7a8b085de4 100644
--- a/drivers/gpu/drm/drm_dp_mst_topology.c
+++ b/drivers/gpu/drm/drm_dp_mst_topology.c
@@ -2350,6 +2350,7 @@ drm_dp_mst_add_port(struct drm_device *dev,
port->aux.is_remote = true;
/* initialize the MST downstream port's AUX crc work queue */
+ port->aux.drm_dev = dev;
drm_dp_remote_aux_init(&port->aux);
/*
diff --git a/drivers/gpu/drm/i915/display/intel_dp_aux.c b/drivers/gpu/drm/i915/display/intel_dp_aux.c
index 7e83bc2cc34a..c4b446d6a042 100644
--- a/drivers/gpu/drm/i915/display/intel_dp_aux.c
+++ b/drivers/gpu/drm/i915/display/intel_dp_aux.c
@@ -682,6 +682,7 @@ void intel_dp_aux_init(struct intel_dp *intel_dp)
else
intel_dp->get_aux_send_ctl = g4x_get_aux_send_ctl;
+ intel_dp->aux.drm_dev = &dev_priv->drm;
drm_dp_aux_init(&intel_dp->aux);
/* Failure to allocate our preferred name is not critical */
diff --git a/drivers/gpu/drm/msm/edp/edp.h b/drivers/gpu/drm/msm/edp/edp.h
index eb34243dad53..8590f2ce274d 100644
--- a/drivers/gpu/drm/msm/edp/edp.h
+++ b/drivers/gpu/drm/msm/edp/edp.h
@@ -46,8 +46,7 @@ void edp_bridge_destroy(struct drm_bridge *bridge);
struct drm_connector *msm_edp_connector_init(struct msm_edp *edp);
/* AUX */
-void *msm_edp_aux_init(struct device *dev, void __iomem *regbase,
- struct drm_dp_aux **drm_aux);
+void *msm_edp_aux_init(struct msm_edp *edp, void __iomem *regbase, struct drm_dp_aux **drm_aux);
void msm_edp_aux_destroy(struct device *dev, struct edp_aux *aux);
irqreturn_t msm_edp_aux_irq(struct edp_aux *aux, u32 isr);
void msm_edp_aux_ctrl(struct edp_aux *aux, int enable);
diff --git a/drivers/gpu/drm/msm/edp/edp_aux.c b/drivers/gpu/drm/msm/edp/edp_aux.c
index df10a0196d94..e3d85c622cfb 100644
--- a/drivers/gpu/drm/msm/edp/edp_aux.c
+++ b/drivers/gpu/drm/msm/edp/edp_aux.c
@@ -184,9 +184,9 @@ static ssize_t edp_aux_transfer(struct drm_dp_aux *drm_aux,
return ret;
}
-void *msm_edp_aux_init(struct device *dev, void __iomem *regbase,
- struct drm_dp_aux **drm_aux)
+void *msm_edp_aux_init(struct msm_edp *edp, void __iomem *regbase, struct drm_dp_aux **drm_aux)
{
+ struct device *dev = &edp->pdev->dev;
struct edp_aux *aux = NULL;
int ret;
@@ -201,6 +201,7 @@ void *msm_edp_aux_init(struct device *dev, void __iomem *regbase,
aux->drm_aux.name = "msm_edp_aux";
aux->drm_aux.dev = dev;
+ aux->drm_aux.drm_dev = edp->dev;
aux->drm_aux.transfer = edp_aux_transfer;
ret = drm_dp_aux_register(&aux->drm_aux);
if (ret) {
diff --git a/drivers/gpu/drm/msm/edp/edp_ctrl.c b/drivers/gpu/drm/msm/edp/edp_ctrl.c
index 0d9657cc70db..57af3d8b6699 100644
--- a/drivers/gpu/drm/msm/edp/edp_ctrl.c
+++ b/drivers/gpu/drm/msm/edp/edp_ctrl.c
@@ -1153,7 +1153,7 @@ int msm_edp_ctrl_init(struct msm_edp *edp)
}
/* Init aux and phy */
- ctrl->aux = msm_edp_aux_init(dev, ctrl->base, &ctrl->drm_aux);
+ ctrl->aux = msm_edp_aux_init(edp, ctrl->base, &ctrl->drm_aux);
if (!ctrl->aux || !ctrl->drm_aux) {
pr_err("%s:failed to init aux\n", __func__);
return -ENOMEM;
diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c
index bfce762adcf0..d1b49508ecb9 100644
--- a/drivers/gpu/drm/nouveau/nouveau_connector.c
+++ b/drivers/gpu/drm/nouveau/nouveau_connector.c
@@ -1355,6 +1355,7 @@ nouveau_connector_create(struct drm_device *dev,
case DRM_MODE_CONNECTOR_DisplayPort:
case DRM_MODE_CONNECTOR_eDP:
nv_connector->aux.dev = connector->kdev;
+ nv_connector->aux.drm_dev = dev;
nv_connector->aux.transfer = nouveau_connector_aux_xfer;
snprintf(aux_name, sizeof(aux_name), "sor-%04x-%04x",
dcbe->hasht, dcbe->hashm);
diff --git a/drivers/gpu/drm/radeon/atombios_dp.c b/drivers/gpu/drm/radeon/atombios_dp.c
index 15b00a347560..c50c504bad50 100644
--- a/drivers/gpu/drm/radeon/atombios_dp.c
+++ b/drivers/gpu/drm/radeon/atombios_dp.c
@@ -232,6 +232,7 @@ void radeon_dp_aux_init(struct radeon_connector *radeon_connector)
radeon_connector->ddc_bus->rec.hpd = radeon_connector->hpd.hpd;
radeon_connector->ddc_bus->aux.dev = radeon_connector->base.kdev;
+ radeon_connector->ddc_bus->aux.drm_dev = radeon_connector->base.dev;
if (ASIC_IS_DCE5(rdev)) {
if (radeon_auxch)
radeon_connector->ddc_bus->aux.transfer = radeon_dp_aux_transfer_native;
diff --git a/drivers/gpu/drm/tegra/dpaux.c b/drivers/gpu/drm/tegra/dpaux.c
index ea56c6ec25e4..7d7cc90b6fc9 100644
--- a/drivers/gpu/drm/tegra/dpaux.c
+++ b/drivers/gpu/drm/tegra/dpaux.c
@@ -719,6 +719,7 @@ int drm_dp_aux_attach(struct drm_dp_aux *aux, struct tegra_output *output)
unsigned long timeout;
int err;
+ aux->drm_dev = output->connector.dev;
err = drm_dp_aux_register(aux);
if (err < 0)
return err;
diff --git a/drivers/gpu/drm/xlnx/zynqmp_dp.c b/drivers/gpu/drm/xlnx/zynqmp_dp.c
index 99158ee67d02..8272eee03adc 100644
--- a/drivers/gpu/drm/xlnx/zynqmp_dp.c
+++ b/drivers/gpu/drm/xlnx/zynqmp_dp.c
@@ -1069,6 +1069,7 @@ static int zynqmp_dp_aux_init(struct zynqmp_dp *dp)
dp->aux.name = "ZynqMP DP AUX";
dp->aux.dev = dp->dev;
+ dp->aux.drm_dev = dp->drm;
dp->aux.transfer = zynqmp_dp_aux_transfer;
return drm_dp_aux_register(&dp->aux);
diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
index 5efa0d329b67..4abe0cea1302 100644
--- a/include/drm/drm_dp_helper.h
+++ b/include/drm/drm_dp_helper.h
@@ -1838,6 +1838,8 @@ struct drm_dp_aux_cec {
* @name: user-visible name of this AUX channel and the I2C-over-AUX adapter
* @ddc: I2C adapter that can be used for I2C-over-AUX communication
* @dev: pointer to struct device that is the parent for this AUX channel
+ * @drm_dev: pointer to the &drm_device that owns this AUX channel. Beware, this may be %NULL
+ * before drm_dp_aux_register() has been called.
* @crtc: backpointer to the crtc that is currently using this AUX channel
* @hw_mutex: internal mutex used for locking transfers
* @crc_work: worker that captures CRCs for each frame
@@ -1845,7 +1847,11 @@ struct drm_dp_aux_cec {
* @transfer: transfers a message representing a single AUX transaction
*
* The @dev field should be set to a pointer to the device that implements the
- * AUX channel.
+ * AUX channel. As well, the @drm_dev field should be set to the &drm_device
+ * that will be using this AUX channel as early as possible. For many graphics
+ * drivers this should happen before drm_dp_aux_init(), however it's perfectly
+ * fine to set this field later so long as it's assigned before calling
+ * drm_dp_aux_register().
*
* The @name field may be used to specify the name of the I2C adapter. If set to
* %NULL, dev_name() of @dev will be used.
@@ -1877,6 +1883,7 @@ struct drm_dp_aux {
const char *name;
struct i2c_adapter ddc;
struct device *dev;
+ struct drm_device *drm_dev;
struct drm_crtc *crtc;
struct mutex hw_mutex;
struct work_struct crc_work;
--
2.30.2
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply related [flat|nested] 32+ messages in thread* Re: [Nouveau] [PATCH v2 05/20] drm/dp: Add backpointer to drm_device in drm_dp_aux
2021-03-26 20:37 ` [Nouveau] [PATCH v2 05/20] drm/dp: Add backpointer to drm_device in drm_dp_aux Lyude Paul
@ 2021-03-29 7:08 ` Thierry Reding
2021-04-01 13:31 ` Jani Nikula
1 sibling, 0 replies; 32+ messages in thread
From: Thierry Reding @ 2021-03-29 7:08 UTC (permalink / raw)
To: Lyude Paul
Cc: Neil Armstrong, David Airlie, nouveau, Guido Günther,
Joonas Lahtinen, Oleg Vasilev, dri-devel, Andrzej Hajda,
Laurent Pinchart, Sam Ravnborg, Ville Syrjälä,
Marek Szyprowski, Tomi Valkeinen, Rodrigo Siqueira, Michal Simek,
amd-gfx, Vasily Khoruzhick, Jerry (Fangzhi) Zuo, Luben Tuikov,
Ben Skeggs, Swapnil Jakhade, Harry Wentland, Imre Deak,
moderated list:ARM/ZYNQ ARCHITECTURE, Daniel Vetter,
Jonas Karlman, Leo Li, Lucas De Marchi, intel-gfx,
Maarten Lankhorst, Maxime Ripard, Joe Perches, Yuti Amonkar,
Jani Nikula, Rodrigo Vivi,
open list:DRM DRIVERS FOR NVIDIA TEGRA, Mikita Lipski, Sean Paul,
open list:DRM DRIVER FOR MSM ADRENO GPU, Matt Roper,
Jernej Skrabec, Chris Park, Eryk Brol, Hyun Kwon, Jyri Sarha,
open list, Robert Foss, Julia Lawall, Rob Clark, Boris Brezillon,
Alex Deucher, Andy Yan, open list:DRM DRIVER FOR MSM ADRENO GPU,
Christian König
[-- Attachment #1.1: Type: text/plain, Size: 943 bytes --]
On Fri, Mar 26, 2021 at 04:37:52PM -0400, Lyude Paul wrote:
> This is something that we've wanted for a while now: the ability to
> actually look up the respective drm_device for a given drm_dp_aux struct.
> This will also allow us to transition over to using the drm_dbg_*() helpers
> for debug message printing, as we'll finally have a drm_device to reference
> for doing so.
>
> Note that there is one limitation with this - because some DP AUX adapters
> exist as platform devices which are initialized independently of their
> respective DRM devices, one cannot rely on drm_dp_aux->drm_dev to always be
> non-NULL until drm_dp_aux_register() has been called. We make sure to point
> this out in the documentation for struct drm_dp_aux.
>
> Signed-off-by: Lyude Paul <lyude@redhat.com>
> ---
[...]
> drivers/gpu/drm/tegra/dpaux.c | 1 +
[...]
Acked-by: Thierry Reding <treding@nvidia.com>
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
[-- Attachment #2: Type: text/plain, Size: 154 bytes --]
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [Nouveau] [PATCH v2 05/20] drm/dp: Add backpointer to drm_device in drm_dp_aux
2021-03-26 20:37 ` [Nouveau] [PATCH v2 05/20] drm/dp: Add backpointer to drm_device in drm_dp_aux Lyude Paul
2021-03-29 7:08 ` Thierry Reding
@ 2021-04-01 13:31 ` Jani Nikula
1 sibling, 0 replies; 32+ messages in thread
From: Jani Nikula @ 2021-04-01 13:31 UTC (permalink / raw)
To: Lyude Paul, nouveau, dri-devel, amd-gfx, intel-gfx
Cc: Neil Armstrong, David Airlie, Guido Günther,
Joonas Lahtinen, Oleg Vasilev, Andrzej Hajda, Thierry Reding,
Laurent Pinchart, Sam Ravnborg, Ville Syrjälä,
Marek Szyprowski, Tomi Valkeinen, Rodrigo Siqueira, Michal Simek,
Vasily Khoruzhick, Jerry (Fangzhi) Zuo, Luben Tuikov, Ben Skeggs,
Swapnil Jakhade, Harry Wentland, Imre Deak,
moderated list:ARM/ZYNQ ARCHITECTURE, Daniel Vetter,
Jonas Karlman, Leo Li, Lucas De Marchi, Maarten Lankhorst,
Maxime Ripard, Joe Perches, Yuti Amonkar, Jyri Sarha,
Rodrigo Vivi, open list:DRM DRIVERS FOR NVIDIA TEGRA,
Mikita Lipski, Sean Paul,
open list:DRM DRIVER FOR MSM ADRENO GPU, Matt Roper,
Jernej Skrabec, Chris Park, Eryk Brol, Hyun Kwon, open list,
Robert Foss, Julia Lawall, Rob Clark, Boris Brezillon,
Alex Deucher, Andy Yan, open list:DRM DRIVER FOR MSM ADRENO GPU,
Christian König
On Fri, 26 Mar 2021, Lyude Paul <lyude@redhat.com> wrote:
> * The @dev field should be set to a pointer to the device that implements the
> - * AUX channel.
> + * AUX channel. As well, the @drm_dev field should be set to the &drm_device
> + * that will be using this AUX channel as early as possible. For many graphics
> + * drivers this should happen before drm_dp_aux_init(), however it's perfectly
> + * fine to set this field later so long as it's assigned before calling
> + * drm_dp_aux_register().
Perhaps add a follow-up patch to actually ensure this is the case in
drm_dp_aux_register()?
> *
> * The @name field may be used to specify the name of the I2C adapter. If set to
> * %NULL, dev_name() of @dev will be used.
> @@ -1877,6 +1883,7 @@ struct drm_dp_aux {
> const char *name;
> struct i2c_adapter ddc;
> struct device *dev;
> + struct drm_device *drm_dev;
Bikeshed, I would probably have called it just drm for brevity, but no
strong feelings.
BR,
Jani.
--
Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply [flat|nested] 32+ messages in thread
* [Nouveau] [PATCH v2 06/20] drm/dp: Clarify DP AUX registration time
2021-03-26 20:37 [Nouveau] [PATCH v2 00/20] drm: Use new DRM printk funcs (like drm_dbg_*()) in DP helpers Lyude Paul
` (4 preceding siblings ...)
2021-03-26 20:37 ` [Nouveau] [PATCH v2 05/20] drm/dp: Add backpointer to drm_device in drm_dp_aux Lyude Paul
@ 2021-03-26 20:37 ` Lyude Paul
2021-03-26 20:37 ` [Nouveau] [PATCH v2 07/20] drm/print: Fixup DRM_DEBUG_KMS_RATELIMITED() Lyude Paul
` (14 subsequent siblings)
20 siblings, 0 replies; 32+ messages in thread
From: Lyude Paul @ 2021-03-26 20:37 UTC (permalink / raw)
To: nouveau, dri-devel, amd-gfx, intel-gfx
Cc: David Airlie, Maarten Lankhorst, open list, Maxime Ripard, Daniel Vetter
The docs we had for drm_dp_aux_init() and drm_dp_aux_register() were mostly
correct, except for the fact that they made the assumption that all AUX
devices were grandchildren of their respective DRM devices. This is the
case for most normal GPUs, but is almost never the case with SoCs and
display bridges. So, let's fix this documentation to clarify when the right
time to use drm_dp_aux_init() or drm_dp_aux_register() is.
Signed-off-by: Lyude Paul <lyude@redhat.com>
---
drivers/gpu/drm/drm_dp_helper.c | 44 +++++++++++++++++++++++----------
1 file changed, 31 insertions(+), 13 deletions(-)
diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c
index eedbb48815b7..3fa858b9691c 100644
--- a/drivers/gpu/drm/drm_dp_helper.c
+++ b/drivers/gpu/drm/drm_dp_helper.c
@@ -1728,10 +1728,17 @@ EXPORT_SYMBOL(drm_dp_remote_aux_init);
* drm_dp_aux_init() - minimally initialise an aux channel
* @aux: DisplayPort AUX channel
*
- * If you need to use the drm_dp_aux's i2c adapter prior to registering it
- * with the outside world, call drm_dp_aux_init() first. You must still
- * call drm_dp_aux_register() once the connector has been registered to
- * allow userspace access to the auxiliary DP channel.
+ * If you need to use the drm_dp_aux's i2c adapter prior to registering it with
+ * the outside world, call drm_dp_aux_init() first. For drivers which are
+ * grandparents to their AUX adapters (e.g. the AUX adapter is parented by a
+ * &drm_connector), you must still call drm_dp_aux_register() once the connector
+ * has been registered to allow userspace access to the auxiliary DP channel.
+ * Likewise, for such drivers you should also assign &drm_dp_aux.drm_dev as
+ * early as possible so that the &drm_device that corresponds to the AUX adapter
+ * may be mentioned in debugging output from the DRM DP helpers.
+ *
+ * For devices which use a separate platform device for their AUX adapters, this
+ * may be called as early as required by the driver.
*/
void drm_dp_aux_init(struct drm_dp_aux *aux)
{
@@ -1751,15 +1758,26 @@ EXPORT_SYMBOL(drm_dp_aux_init);
* drm_dp_aux_register() - initialise and register aux channel
* @aux: DisplayPort AUX channel
*
- * Automatically calls drm_dp_aux_init() if this hasn't been done yet.
- * This should only be called when the underlying &struct drm_connector is
- * initialiazed already. Therefore the best place to call this is from
- * &drm_connector_funcs.late_register. Not that drivers which don't follow this
- * will Oops when CONFIG_DRM_DP_AUX_CHARDEV is enabled.
- *
- * Drivers which need to use the aux channel before that point (e.g. at driver
- * load time, before drm_dev_register() has been called) need to call
- * drm_dp_aux_init().
+ * Automatically calls drm_dp_aux_init() if this hasn't been done yet. This
+ * should only be called once the parent of @aux, &drm_dp_aux.dev, is
+ * initialized. For devices which are grandparents of their AUX channels,
+ * &drm_dp_aux.dev will typically be the &drm_connector &device which
+ * corresponds to @aux. For these devices, it's advised to call
+ * drm_dp_aux_register() in &drm_connector_funcs.late_register, and likewise to
+ * call drm_dp_aux_unregister() in &drm_connector_funcs.early_unregister.
+ * Functions which don't follow this will likely Oops when
+ * %CONFIG_DRM_DP_AUX_CHARDEV is enabled.
+ *
+ * For devices where the AUX channel is a device that exists independently of
+ * the &drm_device that uses it, such as SoCs and bridge devices, it is
+ * recommended to call drm_dp_aux_register() after a &drm_device has been
+ * assigned to &drm_dp_aux.drm_dev, and likewise to call drm_dp_aux_unregister()
+ * once the &drm_device should no longer be associated with the AUX channel
+ * (e.g. on bridge detach).
+ *
+ * Drivers which need to use the aux channel before either of the two points
+ * mentioned above need to call drm_dp_aux_init() in order to use the AUX
+ * channel before registration.
*
* Returns 0 on success or a negative error code on failure.
*/
--
2.30.2
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply related [flat|nested] 32+ messages in thread* [Nouveau] [PATCH v2 07/20] drm/print: Fixup DRM_DEBUG_KMS_RATELIMITED()
2021-03-26 20:37 [Nouveau] [PATCH v2 00/20] drm: Use new DRM printk funcs (like drm_dbg_*()) in DP helpers Lyude Paul
` (5 preceding siblings ...)
2021-03-26 20:37 ` [Nouveau] [PATCH v2 06/20] drm/dp: Clarify DP AUX registration time Lyude Paul
@ 2021-03-26 20:37 ` Lyude Paul
2021-03-30 10:43 ` Robert Foss
2021-03-26 20:37 ` [Nouveau] [PATCH v2 08/20] drm/dp: Pass drm_dp_aux to drm_dp_link_train_clock_recovery_delay() Lyude Paul
` (13 subsequent siblings)
20 siblings, 1 reply; 32+ messages in thread
From: Lyude Paul @ 2021-03-26 20:37 UTC (permalink / raw)
To: nouveau, dri-devel, amd-gfx, intel-gfx
Cc: Daniel Vetter, David Airlie, Maarten Lankhorst, open list,
Maxime Ripard, Robert Foss
Since we're about to move drm_dp_helper.c over to drm_dbg_*(), we'll want
to make sure that we can also add ratelimited versions of these macros in
order to retain some of the previous debugging output behavior we had.
However, as I was preparing to do this I noticed that the current
rate limited macros we have are kind of bogus. It looks like when I wrote
these, I didn't notice that we'd always be calling __ratelimit() even if
the debugging message we'd be printing would normally be filtered out due
to the relevant DRM debugging category being disabled.
So, let's fix this by making sure to check drm_debug_enabled() in our
ratelimited macros before calling __ratelimit(), and start using
drm_dev_printk() in order to print debugging messages since that will save
us from doing a redundant drm_debug_enabled() check. And while we're at it,
let's move the code for this into another macro that we can reuse for
defining new ratelimited DRM debug macros more easily.
v2:
* Make sure to use tabs where possible in __DRM_DEFINE_DBG_RATELIMITED()
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Robert Foss <robert.foss@linaro.org>
---
include/drm/drm_print.h | 20 ++++++++++++--------
1 file changed, 12 insertions(+), 8 deletions(-)
diff --git a/include/drm/drm_print.h b/include/drm/drm_print.h
index f32d179e139d..a3c58c941bdc 100644
--- a/include/drm/drm_print.h
+++ b/include/drm/drm_print.h
@@ -524,16 +524,20 @@ void __drm_err(const char *format, ...);
#define DRM_DEBUG_DP(fmt, ...) \
__drm_dbg(DRM_UT_DP, fmt, ## __VA_ARGS__)
-
-#define DRM_DEBUG_KMS_RATELIMITED(fmt, ...) \
-({ \
- static DEFINE_RATELIMIT_STATE(_rs, \
- DEFAULT_RATELIMIT_INTERVAL, \
- DEFAULT_RATELIMIT_BURST); \
- if (__ratelimit(&_rs)) \
- drm_dev_dbg(NULL, DRM_UT_KMS, fmt, ##__VA_ARGS__); \
+#define __DRM_DEFINE_DBG_RATELIMITED(category, drm, fmt, ...) \
+({ \
+ static DEFINE_RATELIMIT_STATE(rs_, DEFAULT_RATELIMIT_INTERVAL, DEFAULT_RATELIMIT_BURST);\
+ const struct drm_device *drm_ = (drm); \
+ \
+ if (drm_debug_enabled(DRM_UT_ ## category) && __ratelimit(&rs_)) \
+ drm_dev_printk(drm_ ? drm_->dev : NULL, KERN_DEBUG, fmt, ## __VA_ARGS__); \
})
+#define drm_dbg_kms_ratelimited(drm, fmt, ...) \
+ __DRM_DEFINE_DBG_RATELIMITED(KMS, drm, fmt, ## __VA_ARGS__)
+
+#define DRM_DEBUG_KMS_RATELIMITED(fmt, ...) drm_dbg_kms_ratelimited(NULL, fmt, ## __VA_ARGS__)
+
/*
* struct drm_device based WARNs
*
--
2.30.2
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply related [flat|nested] 32+ messages in thread* Re: [Nouveau] [PATCH v2 07/20] drm/print: Fixup DRM_DEBUG_KMS_RATELIMITED()
2021-03-26 20:37 ` [Nouveau] [PATCH v2 07/20] drm/print: Fixup DRM_DEBUG_KMS_RATELIMITED() Lyude Paul
@ 2021-03-30 10:43 ` Robert Foss
0 siblings, 0 replies; 32+ messages in thread
From: Robert Foss @ 2021-03-30 10:43 UTC (permalink / raw)
To: Lyude Paul
Cc: dri-devel, David Airlie, nouveau, intel-gfx, Maarten Lankhorst,
open list, Maxime Ripard, amd-gfx, Daniel Vetter
Hey Lyude,
I'm seeing no issues with this patch and the reasoning behind the
patch is sound to me.
Reviewed-by: Robert Foss <robert.foss@linaro.org>
On Fri, 26 Mar 2021 at 21:39, Lyude Paul <lyude@redhat.com> wrote:
>
> Since we're about to move drm_dp_helper.c over to drm_dbg_*(), we'll want
> to make sure that we can also add ratelimited versions of these macros in
> order to retain some of the previous debugging output behavior we had.
>
> However, as I was preparing to do this I noticed that the current
> rate limited macros we have are kind of bogus. It looks like when I wrote
> these, I didn't notice that we'd always be calling __ratelimit() even if
> the debugging message we'd be printing would normally be filtered out due
> to the relevant DRM debugging category being disabled.
>
> So, let's fix this by making sure to check drm_debug_enabled() in our
> ratelimited macros before calling __ratelimit(), and start using
> drm_dev_printk() in order to print debugging messages since that will save
> us from doing a redundant drm_debug_enabled() check. And while we're at it,
> let's move the code for this into another macro that we can reuse for
> defining new ratelimited DRM debug macros more easily.
>
> v2:
> * Make sure to use tabs where possible in __DRM_DEFINE_DBG_RATELIMITED()
>
> Signed-off-by: Lyude Paul <lyude@redhat.com>
> Cc: Robert Foss <robert.foss@linaro.org>
> ---
> include/drm/drm_print.h | 20 ++++++++++++--------
> 1 file changed, 12 insertions(+), 8 deletions(-)
>
> diff --git a/include/drm/drm_print.h b/include/drm/drm_print.h
> index f32d179e139d..a3c58c941bdc 100644
> --- a/include/drm/drm_print.h
> +++ b/include/drm/drm_print.h
> @@ -524,16 +524,20 @@ void __drm_err(const char *format, ...);
> #define DRM_DEBUG_DP(fmt, ...) \
> __drm_dbg(DRM_UT_DP, fmt, ## __VA_ARGS__)
>
> -
> -#define DRM_DEBUG_KMS_RATELIMITED(fmt, ...) \
> -({ \
> - static DEFINE_RATELIMIT_STATE(_rs, \
> - DEFAULT_RATELIMIT_INTERVAL, \
> - DEFAULT_RATELIMIT_BURST); \
> - if (__ratelimit(&_rs)) \
> - drm_dev_dbg(NULL, DRM_UT_KMS, fmt, ##__VA_ARGS__); \
> +#define __DRM_DEFINE_DBG_RATELIMITED(category, drm, fmt, ...) \
> +({ \
> + static DEFINE_RATELIMIT_STATE(rs_, DEFAULT_RATELIMIT_INTERVAL, DEFAULT_RATELIMIT_BURST);\
> + const struct drm_device *drm_ = (drm); \
> + \
> + if (drm_debug_enabled(DRM_UT_ ## category) && __ratelimit(&rs_)) \
> + drm_dev_printk(drm_ ? drm_->dev : NULL, KERN_DEBUG, fmt, ## __VA_ARGS__); \
> })
>
> +#define drm_dbg_kms_ratelimited(drm, fmt, ...) \
> + __DRM_DEFINE_DBG_RATELIMITED(KMS, drm, fmt, ## __VA_ARGS__)
> +
> +#define DRM_DEBUG_KMS_RATELIMITED(fmt, ...) drm_dbg_kms_ratelimited(NULL, fmt, ## __VA_ARGS__)
> +
> /*
> * struct drm_device based WARNs
> *
> --
> 2.30.2
>
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply [flat|nested] 32+ messages in thread
* [Nouveau] [PATCH v2 08/20] drm/dp: Pass drm_dp_aux to drm_dp_link_train_clock_recovery_delay()
2021-03-26 20:37 [Nouveau] [PATCH v2 00/20] drm: Use new DRM printk funcs (like drm_dbg_*()) in DP helpers Lyude Paul
` (6 preceding siblings ...)
2021-03-26 20:37 ` [Nouveau] [PATCH v2 07/20] drm/print: Fixup DRM_DEBUG_KMS_RATELIMITED() Lyude Paul
@ 2021-03-26 20:37 ` Lyude Paul
2021-03-26 20:37 ` [Nouveau] [PATCH v2 09/20] drm/dp: Pass drm_dp_aux to drm_dp*_link_train_channel_eq_delay() Lyude Paul
` (12 subsequent siblings)
20 siblings, 0 replies; 32+ messages in thread
From: Lyude Paul @ 2021-03-26 20:37 UTC (permalink / raw)
To: nouveau, dri-devel, amd-gfx, intel-gfx
Cc: David Airlie, Imre Deak, Joonas Lahtinen, Oleg Vasilev,
Tanmay Shah, Laurent Pinchart, Lee Jones, Ville Syrjälä,
Michal Simek, Luben Tuikov, Chandan Uddaraju, Daniel Vetter,
Jeevan B, open list:DRM DRIVER FOR MSM ADRENO GPU,
Maarten Lankhorst, Jani Nikula, Stephen Boyd, Kuogee Hsieh,
Maxime Ripard, Rodrigo Vivi, Sean Paul,
moderated list:ARM/ZYNQ ARCHITECTURE, Hyun Kwon, open list,
Manasi Navare, Rob Clark, Alex Deucher,
open list:DRM DRIVER FOR MSM ADRENO GPU, Christian König
So that we can start using drm_dbg_*() in
drm_dp_link_train_clock_recovery_delay().
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
---
drivers/gpu/drm/amd/amdgpu/atombios_dp.c | 2 +-
drivers/gpu/drm/drm_dp_helper.c | 3 ++-
drivers/gpu/drm/i915/display/intel_dp_link_training.c | 2 +-
drivers/gpu/drm/msm/dp/dp_ctrl.c | 2 +-
drivers/gpu/drm/msm/edp/edp_ctrl.c | 2 +-
drivers/gpu/drm/radeon/atombios_dp.c | 2 +-
drivers/gpu/drm/xlnx/zynqmp_dp.c | 2 +-
include/drm/drm_dp_helper.h | 4 +++-
8 files changed, 11 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/atombios_dp.c b/drivers/gpu/drm/amd/amdgpu/atombios_dp.c
index 6d35da65e09f..4468f9d6b4dd 100644
--- a/drivers/gpu/drm/amd/amdgpu/atombios_dp.c
+++ b/drivers/gpu/drm/amd/amdgpu/atombios_dp.c
@@ -611,7 +611,7 @@ amdgpu_atombios_dp_link_train_cr(struct amdgpu_atombios_dp_link_train_info *dp_i
dp_info->tries = 0;
voltage = 0xff;
while (1) {
- drm_dp_link_train_clock_recovery_delay(dp_info->dpcd);
+ drm_dp_link_train_clock_recovery_delay(dp_info->aux, dp_info->dpcd);
if (drm_dp_dpcd_read_link_status(dp_info->aux,
dp_info->link_status) <= 0) {
diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c
index 3fa858b9691c..4462624daefc 100644
--- a/drivers/gpu/drm/drm_dp_helper.c
+++ b/drivers/gpu/drm/drm_dp_helper.c
@@ -132,7 +132,8 @@ u8 drm_dp_get_adjust_request_post_cursor(const u8 link_status[DP_LINK_STATUS_SIZ
}
EXPORT_SYMBOL(drm_dp_get_adjust_request_post_cursor);
-void drm_dp_link_train_clock_recovery_delay(const u8 dpcd[DP_RECEIVER_CAP_SIZE])
+void drm_dp_link_train_clock_recovery_delay(const struct drm_dp_aux *aux,
+ const u8 dpcd[DP_RECEIVER_CAP_SIZE])
{
unsigned long rd_interval = dpcd[DP_TRAINING_AUX_RD_INTERVAL] &
DP_TRAINING_AUX_RD_MASK;
diff --git a/drivers/gpu/drm/i915/display/intel_dp_link_training.c b/drivers/gpu/drm/i915/display/intel_dp_link_training.c
index 5e9c3c74310c..f543b494f052 100644
--- a/drivers/gpu/drm/i915/display/intel_dp_link_training.c
+++ b/drivers/gpu/drm/i915/display/intel_dp_link_training.c
@@ -513,7 +513,7 @@ static void intel_dp_link_training_clock_recovery_delay(struct intel_dp *intel_d
enum drm_dp_phy dp_phy)
{
if (dp_phy == DP_PHY_DPRX)
- drm_dp_link_train_clock_recovery_delay(intel_dp->dpcd);
+ drm_dp_link_train_clock_recovery_delay(&intel_dp->aux, intel_dp->dpcd);
else
drm_dp_lttpr_link_train_clock_recovery_delay();
}
diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c b/drivers/gpu/drm/msm/dp/dp_ctrl.c
index 1390f3547fde..264a9eae87d3 100644
--- a/drivers/gpu/drm/msm/dp/dp_ctrl.c
+++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c
@@ -1103,7 +1103,7 @@ static int dp_ctrl_link_train_1(struct dp_ctrl_private *ctrl,
tries = 0;
old_v_level = ctrl->link->phy_params.v_level;
for (tries = 0; tries < maximum_retries; tries++) {
- drm_dp_link_train_clock_recovery_delay(ctrl->panel->dpcd);
+ drm_dp_link_train_clock_recovery_delay(ctrl->aux, ctrl->panel->dpcd);
ret = dp_ctrl_read_link_status(ctrl, link_status);
if (ret)
diff --git a/drivers/gpu/drm/msm/edp/edp_ctrl.c b/drivers/gpu/drm/msm/edp/edp_ctrl.c
index 57af3d8b6699..6501598448b4 100644
--- a/drivers/gpu/drm/msm/edp/edp_ctrl.c
+++ b/drivers/gpu/drm/msm/edp/edp_ctrl.c
@@ -608,7 +608,7 @@ static int edp_start_link_train_1(struct edp_ctrl *ctrl)
tries = 0;
old_v_level = ctrl->v_level;
while (1) {
- drm_dp_link_train_clock_recovery_delay(ctrl->dpcd);
+ drm_dp_link_train_clock_recovery_delay(ctrl->drm_aux, ctrl->dpcd);
rlen = drm_dp_dpcd_read_link_status(ctrl->drm_aux, link_status);
if (rlen < DP_LINK_STATUS_SIZE) {
diff --git a/drivers/gpu/drm/radeon/atombios_dp.c b/drivers/gpu/drm/radeon/atombios_dp.c
index c50c504bad50..299b9d8da376 100644
--- a/drivers/gpu/drm/radeon/atombios_dp.c
+++ b/drivers/gpu/drm/radeon/atombios_dp.c
@@ -680,7 +680,7 @@ static int radeon_dp_link_train_cr(struct radeon_dp_link_train_info *dp_info)
dp_info->tries = 0;
voltage = 0xff;
while (1) {
- drm_dp_link_train_clock_recovery_delay(dp_info->dpcd);
+ drm_dp_link_train_clock_recovery_delay(dp_info->aux, dp_info->dpcd);
if (drm_dp_dpcd_read_link_status(dp_info->aux,
dp_info->link_status) <= 0) {
diff --git a/drivers/gpu/drm/xlnx/zynqmp_dp.c b/drivers/gpu/drm/xlnx/zynqmp_dp.c
index 8272eee03adc..5cc295d8ba9f 100644
--- a/drivers/gpu/drm/xlnx/zynqmp_dp.c
+++ b/drivers/gpu/drm/xlnx/zynqmp_dp.c
@@ -713,7 +713,7 @@ static int zynqmp_dp_link_train_cr(struct zynqmp_dp *dp)
if (ret)
return ret;
- drm_dp_link_train_clock_recovery_delay(dp->dpcd);
+ drm_dp_link_train_clock_recovery_delay(&dp->aux, dp->dpcd);
ret = drm_dp_dpcd_read_link_status(&dp->aux, link_status);
if (ret < 0)
return ret;
diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
index 4abe0cea1302..96197b18ea5d 100644
--- a/include/drm/drm_dp_helper.h
+++ b/include/drm/drm_dp_helper.h
@@ -29,6 +29,7 @@
#include <drm/drm_connector.h>
struct drm_device;
+struct drm_dp_aux;
/*
* Unless otherwise noted, all values are from the DP 1.1a spec. Note that
@@ -1480,7 +1481,8 @@ u8 drm_dp_get_adjust_request_post_cursor(const u8 link_status[DP_LINK_STATUS_SIZ
#define DP_LTTPR_COMMON_CAP_SIZE 8
#define DP_LTTPR_PHY_CAP_SIZE 3
-void drm_dp_link_train_clock_recovery_delay(const u8 dpcd[DP_RECEIVER_CAP_SIZE]);
+void drm_dp_link_train_clock_recovery_delay(const struct drm_dp_aux *aux,
+ const u8 dpcd[DP_RECEIVER_CAP_SIZE]);
void drm_dp_lttpr_link_train_clock_recovery_delay(void);
void drm_dp_link_train_channel_eq_delay(const u8 dpcd[DP_RECEIVER_CAP_SIZE]);
void drm_dp_lttpr_link_train_channel_eq_delay(const u8 caps[DP_LTTPR_PHY_CAP_SIZE]);
--
2.30.2
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply related [flat|nested] 32+ messages in thread* [Nouveau] [PATCH v2 09/20] drm/dp: Pass drm_dp_aux to drm_dp*_link_train_channel_eq_delay()
2021-03-26 20:37 [Nouveau] [PATCH v2 00/20] drm: Use new DRM printk funcs (like drm_dbg_*()) in DP helpers Lyude Paul
` (7 preceding siblings ...)
2021-03-26 20:37 ` [Nouveau] [PATCH v2 08/20] drm/dp: Pass drm_dp_aux to drm_dp_link_train_clock_recovery_delay() Lyude Paul
@ 2021-03-26 20:37 ` Lyude Paul
2021-03-26 20:37 ` [Nouveau] [PATCH v2 10/20] drm/dp: Always print aux channel name in logs Lyude Paul
` (11 subsequent siblings)
20 siblings, 0 replies; 32+ messages in thread
From: Lyude Paul @ 2021-03-26 20:37 UTC (permalink / raw)
To: nouveau, dri-devel, amd-gfx, intel-gfx
Cc: David Airlie, Imre Deak, Joonas Lahtinen, Oleg Vasilev,
Tanmay Shah, Laurent Pinchart, Lee Jones, Ville Syrjälä,
Michal Simek, Luben Tuikov, Chandan Uddaraju, Daniel Vetter,
open list:DRM DRIVER FOR MSM ADRENO GPU, Maarten Lankhorst,
Jani Nikula, Stephen Boyd, Kuogee Hsieh, Maxime Ripard,
Rodrigo Vivi, Sean Paul, moderated list:ARM/ZYNQ ARCHITECTURE,
Hyun Kwon, open list, Manasi Navare, Rob Clark, Alex Deucher,
open list:DRM DRIVER FOR MSM ADRENO GPU, Christian König
So that we can start using drm_dbg_*() for
drm_dp_link_train_channel_eq_delay() and
drm_dp_lttpr_link_train_channel_eq_delay().
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
drivers/gpu/drm/amd/amdgpu/atombios_dp.c | 2 +-
drivers/gpu/drm/drm_dp_helper.c | 14 +++++++++-----
.../gpu/drm/i915/display/intel_dp_link_training.c | 4 ++--
drivers/gpu/drm/msm/dp/dp_ctrl.c | 4 ++--
drivers/gpu/drm/msm/edp/edp_ctrl.c | 4 ++--
drivers/gpu/drm/radeon/atombios_dp.c | 2 +-
drivers/gpu/drm/xlnx/zynqmp_dp.c | 2 +-
include/drm/drm_dp_helper.h | 6 ++++--
8 files changed, 22 insertions(+), 16 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/atombios_dp.c b/drivers/gpu/drm/amd/amdgpu/atombios_dp.c
index 4468f9d6b4dd..59ce6f620fdc 100644
--- a/drivers/gpu/drm/amd/amdgpu/atombios_dp.c
+++ b/drivers/gpu/drm/amd/amdgpu/atombios_dp.c
@@ -676,7 +676,7 @@ amdgpu_atombios_dp_link_train_ce(struct amdgpu_atombios_dp_link_train_info *dp_i
dp_info->tries = 0;
channel_eq = false;
while (1) {
- drm_dp_link_train_channel_eq_delay(dp_info->dpcd);
+ drm_dp_link_train_channel_eq_delay(dp_info->aux, dp_info->dpcd);
if (drm_dp_dpcd_read_link_status(dp_info->aux,
dp_info->link_status) <= 0) {
diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c
index 4462624daefc..f0029b8cb558 100644
--- a/drivers/gpu/drm/drm_dp_helper.c
+++ b/drivers/gpu/drm/drm_dp_helper.c
@@ -151,7 +151,8 @@ void drm_dp_link_train_clock_recovery_delay(const struct drm_dp_aux *aux,
}
EXPORT_SYMBOL(drm_dp_link_train_clock_recovery_delay);
-static void __drm_dp_link_train_channel_eq_delay(unsigned long rd_interval)
+static void __drm_dp_link_train_channel_eq_delay(const struct drm_dp_aux *aux,
+ unsigned long rd_interval)
{
if (rd_interval > 4)
DRM_DEBUG_KMS("AUX interval %lu, out of range (max 4)\n",
@@ -165,9 +166,11 @@ static void __drm_dp_link_train_channel_eq_delay(unsigned long rd_interval)
usleep_range(rd_interval, rd_interval * 2);
}
-void drm_dp_link_train_channel_eq_delay(const u8 dpcd[DP_RECEIVER_CAP_SIZE])
+void drm_dp_link_train_channel_eq_delay(const struct drm_dp_aux *aux,
+ const u8 dpcd[DP_RECEIVER_CAP_SIZE])
{
- __drm_dp_link_train_channel_eq_delay(dpcd[DP_TRAINING_AUX_RD_INTERVAL] &
+ __drm_dp_link_train_channel_eq_delay(aux,
+ dpcd[DP_TRAINING_AUX_RD_INTERVAL] &
DP_TRAINING_AUX_RD_MASK);
}
EXPORT_SYMBOL(drm_dp_link_train_channel_eq_delay);
@@ -183,13 +186,14 @@ static u8 dp_lttpr_phy_cap(const u8 phy_cap[DP_LTTPR_PHY_CAP_SIZE], int r)
return phy_cap[r - DP_TRAINING_AUX_RD_INTERVAL_PHY_REPEATER1];
}
-void drm_dp_lttpr_link_train_channel_eq_delay(const u8 phy_cap[DP_LTTPR_PHY_CAP_SIZE])
+void drm_dp_lttpr_link_train_channel_eq_delay(const struct drm_dp_aux *aux,
+ const u8 phy_cap[DP_LTTPR_PHY_CAP_SIZE])
{
u8 interval = dp_lttpr_phy_cap(phy_cap,
DP_TRAINING_AUX_RD_INTERVAL_PHY_REPEATER1) &
DP_TRAINING_AUX_RD_MASK;
- __drm_dp_link_train_channel_eq_delay(interval);
+ __drm_dp_link_train_channel_eq_delay(aux, interval);
}
EXPORT_SYMBOL(drm_dp_lttpr_link_train_channel_eq_delay);
diff --git a/drivers/gpu/drm/i915/display/intel_dp_link_training.c b/drivers/gpu/drm/i915/display/intel_dp_link_training.c
index f543b494f052..dd7423d3c562 100644
--- a/drivers/gpu/drm/i915/display/intel_dp_link_training.c
+++ b/drivers/gpu/drm/i915/display/intel_dp_link_training.c
@@ -665,11 +665,11 @@ intel_dp_link_training_channel_equalization_delay(struct intel_dp *intel_dp,
enum drm_dp_phy dp_phy)
{
if (dp_phy == DP_PHY_DPRX) {
- drm_dp_link_train_channel_eq_delay(intel_dp->dpcd);
+ drm_dp_link_train_channel_eq_delay(&intel_dp->aux, intel_dp->dpcd);
} else {
const u8 *phy_caps = intel_dp_lttpr_phy_caps(intel_dp, dp_phy);
- drm_dp_lttpr_link_train_channel_eq_delay(phy_caps);
+ drm_dp_lttpr_link_train_channel_eq_delay(&intel_dp->aux, phy_caps);
}
}
diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c b/drivers/gpu/drm/msm/dp/dp_ctrl.c
index 264a9eae87d3..2cebd17a7289 100644
--- a/drivers/gpu/drm/msm/dp/dp_ctrl.c
+++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c
@@ -1184,7 +1184,7 @@ static int dp_ctrl_link_lane_down_shift(struct dp_ctrl_private *ctrl)
static void dp_ctrl_clear_training_pattern(struct dp_ctrl_private *ctrl)
{
dp_ctrl_train_pattern_set(ctrl, DP_TRAINING_PATTERN_DISABLE);
- drm_dp_link_train_channel_eq_delay(ctrl->panel->dpcd);
+ drm_dp_link_train_channel_eq_delay(ctrl->aux, ctrl->panel->dpcd);
}
static int dp_ctrl_link_train_2(struct dp_ctrl_private *ctrl,
@@ -1215,7 +1215,7 @@ static int dp_ctrl_link_train_2(struct dp_ctrl_private *ctrl,
dp_ctrl_train_pattern_set(ctrl, pattern | DP_RECOVERED_CLOCK_OUT_EN);
for (tries = 0; tries <= maximum_retries; tries++) {
- drm_dp_link_train_channel_eq_delay(ctrl->panel->dpcd);
+ drm_dp_link_train_channel_eq_delay(ctrl->aux, ctrl->panel->dpcd);
ret = dp_ctrl_read_link_status(ctrl, link_status);
if (ret)
diff --git a/drivers/gpu/drm/msm/edp/edp_ctrl.c b/drivers/gpu/drm/msm/edp/edp_ctrl.c
index 6501598448b4..4fb397ee7c84 100644
--- a/drivers/gpu/drm/msm/edp/edp_ctrl.c
+++ b/drivers/gpu/drm/msm/edp/edp_ctrl.c
@@ -665,7 +665,7 @@ static int edp_start_link_train_2(struct edp_ctrl *ctrl)
return ret;
while (1) {
- drm_dp_link_train_channel_eq_delay(ctrl->dpcd);
+ drm_dp_link_train_channel_eq_delay(ctrl->drm_aux, ctrl->dpcd);
rlen = drm_dp_dpcd_read_link_status(ctrl->drm_aux, link_status);
if (rlen < DP_LINK_STATUS_SIZE) {
@@ -743,7 +743,7 @@ static int edp_clear_training_pattern(struct edp_ctrl *ctrl)
ret = edp_train_pattern_set_write(ctrl, 0);
- drm_dp_link_train_channel_eq_delay(ctrl->dpcd);
+ drm_dp_link_train_channel_eq_delay(ctrl->drm_aux, ctrl->dpcd);
return ret;
}
diff --git a/drivers/gpu/drm/radeon/atombios_dp.c b/drivers/gpu/drm/radeon/atombios_dp.c
index 299b9d8da376..4c1e551d9714 100644
--- a/drivers/gpu/drm/radeon/atombios_dp.c
+++ b/drivers/gpu/drm/radeon/atombios_dp.c
@@ -743,7 +743,7 @@ static int radeon_dp_link_train_ce(struct radeon_dp_link_train_info *dp_info)
dp_info->tries = 0;
channel_eq = false;
while (1) {
- drm_dp_link_train_channel_eq_delay(dp_info->dpcd);
+ drm_dp_link_train_channel_eq_delay(dp_info->aux, dp_info->dpcd);
if (drm_dp_dpcd_read_link_status(dp_info->aux,
dp_info->link_status) <= 0) {
diff --git a/drivers/gpu/drm/xlnx/zynqmp_dp.c b/drivers/gpu/drm/xlnx/zynqmp_dp.c
index 5cc295d8ba9f..f6f2293db18d 100644
--- a/drivers/gpu/drm/xlnx/zynqmp_dp.c
+++ b/drivers/gpu/drm/xlnx/zynqmp_dp.c
@@ -778,7 +778,7 @@ static int zynqmp_dp_link_train_ce(struct zynqmp_dp *dp)
if (ret)
return ret;
- drm_dp_link_train_channel_eq_delay(dp->dpcd);
+ drm_dp_link_train_channel_eq_delay(&dp->aux, dp->dpcd);
ret = drm_dp_dpcd_read_link_status(&dp->aux, link_status);
if (ret < 0)
return ret;
diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
index 96197b18ea5d..a2836cc32b08 100644
--- a/include/drm/drm_dp_helper.h
+++ b/include/drm/drm_dp_helper.h
@@ -1484,8 +1484,10 @@ u8 drm_dp_get_adjust_request_post_cursor(const u8 link_status[DP_LINK_STATUS_SIZ
void drm_dp_link_train_clock_recovery_delay(const struct drm_dp_aux *aux,
const u8 dpcd[DP_RECEIVER_CAP_SIZE]);
void drm_dp_lttpr_link_train_clock_recovery_delay(void);
-void drm_dp_link_train_channel_eq_delay(const u8 dpcd[DP_RECEIVER_CAP_SIZE]);
-void drm_dp_lttpr_link_train_channel_eq_delay(const u8 caps[DP_LTTPR_PHY_CAP_SIZE]);
+void drm_dp_link_train_channel_eq_delay(const struct drm_dp_aux *aux,
+ const u8 dpcd[DP_RECEIVER_CAP_SIZE]);
+void drm_dp_lttpr_link_train_channel_eq_delay(const struct drm_dp_aux *aux,
+ const u8 caps[DP_LTTPR_PHY_CAP_SIZE]);
u8 drm_dp_link_rate_to_bw_code(int link_rate);
int drm_dp_bw_code_to_link_rate(u8 link_bw);
--
2.30.2
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply related [flat|nested] 32+ messages in thread* [Nouveau] [PATCH v2 10/20] drm/dp: Always print aux channel name in logs
2021-03-26 20:37 [Nouveau] [PATCH v2 00/20] drm: Use new DRM printk funcs (like drm_dbg_*()) in DP helpers Lyude Paul
` (8 preceding siblings ...)
2021-03-26 20:37 ` [Nouveau] [PATCH v2 09/20] drm/dp: Pass drm_dp_aux to drm_dp*_link_train_channel_eq_delay() Lyude Paul
@ 2021-03-26 20:37 ` Lyude Paul
2021-03-26 20:37 ` [Nouveau] [PATCH v2 11/20] drm/dp_dual_mode: Pass drm_device to drm_dp_dual_mode_detect() Lyude Paul
` (10 subsequent siblings)
20 siblings, 0 replies; 32+ messages in thread
From: Lyude Paul @ 2021-03-26 20:37 UTC (permalink / raw)
To: nouveau, dri-devel, amd-gfx, intel-gfx
Cc: David Airlie, Maarten Lankhorst, open list, Maxime Ripard, Daniel Vetter
Since we're about to convert everything in drm_dp_helper.c over to using
drm_dbg_*(), let's also make our logging more consistent in drm_dp_helper.c
while we're at it to ensure that we always print the name of the AUX
channel in question.
Signed-off-by: Lyude Paul <lyude@redhat.com>
---
drivers/gpu/drm/drm_dp_helper.c | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c
index f0029b8cb558..54e19d7b9c51 100644
--- a/drivers/gpu/drm/drm_dp_helper.c
+++ b/drivers/gpu/drm/drm_dp_helper.c
@@ -139,8 +139,8 @@ void drm_dp_link_train_clock_recovery_delay(const struct drm_dp_aux *aux,
DP_TRAINING_AUX_RD_MASK;
if (rd_interval > 4)
- DRM_DEBUG_KMS("AUX interval %lu, out of range (max 4)\n",
- rd_interval);
+ DRM_DEBUG_KMS("%s: AUX interval %lu, out of range (max 4)\n",
+ aux->name, rd_interval);
if (rd_interval == 0 || dpcd[DP_DPCD_REV] >= DP_DPCD_REV_14)
rd_interval = 100;
@@ -155,8 +155,8 @@ static void __drm_dp_link_train_channel_eq_delay(const struct drm_dp_aux *aux,
unsigned long rd_interval)
{
if (rd_interval > 4)
- DRM_DEBUG_KMS("AUX interval %lu, out of range (max 4)\n",
- rd_interval);
+ DRM_DEBUG_KMS("%s: AUX interval %lu, out of range (max 4)\n",
+ aux->name, rd_interval);
if (rd_interval == 0)
rd_interval = 400;
@@ -2774,7 +2774,7 @@ int drm_dp_pcon_frl_enable(struct drm_dp_aux *aux)
if (ret < 0)
return ret;
if (!(buf & DP_PCON_ENABLE_SOURCE_CTL_MODE)) {
- DRM_DEBUG_KMS("PCON in Autonomous mode, can't enable FRL\n");
+ DRM_DEBUG_KMS("%s: PCON in Autonomous mode, can't enable FRL\n", aux->name);
return -EINVAL;
}
buf |= DP_PCON_ENABLE_HDMI_LINK;
@@ -2869,7 +2869,8 @@ void drm_dp_pcon_hdmi_frl_link_error_count(struct drm_dp_aux *aux,
num_error = 0;
}
- DRM_ERROR("More than %d errors since the last read for lane %d", num_error, i);
+ DRM_ERROR("%s: More than %d errors since the last read for lane %d",
+ aux->name, num_error, i);
}
}
EXPORT_SYMBOL(drm_dp_pcon_hdmi_frl_link_error_count);
--
2.30.2
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply related [flat|nested] 32+ messages in thread* [Nouveau] [PATCH v2 11/20] drm/dp_dual_mode: Pass drm_device to drm_dp_dual_mode_detect()
2021-03-26 20:37 [Nouveau] [PATCH v2 00/20] drm: Use new DRM printk funcs (like drm_dbg_*()) in DP helpers Lyude Paul
` (9 preceding siblings ...)
2021-03-26 20:37 ` [Nouveau] [PATCH v2 10/20] drm/dp: Always print aux channel name in logs Lyude Paul
@ 2021-03-26 20:37 ` Lyude Paul
2021-03-26 20:37 ` [Nouveau] [PATCH v2 12/20] drm/dp_dual_mode: Pass drm_device to drm_dp_dual_mode_set_tmds_output() Lyude Paul
` (9 subsequent siblings)
20 siblings, 0 replies; 32+ messages in thread
From: Lyude Paul @ 2021-03-26 20:37 UTC (permalink / raw)
To: nouveau, dri-devel, amd-gfx, intel-gfx
Cc: Lucas De Marchi, Anshuman Gupta, David Airlie, Ramalingam C,
Joonas Lahtinen, Maarten Lankhorst, open list, Jani Nikula,
Uma Shankar, Sean Paul, Maxime Ripard, Daniel Vetter,
Rodrigo Vivi, Kai-Heng Feng, Ankit Nautiyal, Matt Roper,
Ville Syrjälä
Since we're about to be using drm_dbg_*() throughout the DP helpers, we'll
need to be able to access the DRM device in the dual mode DP helpers as
well. Note however that since drm_dp_dual_mode_detect() can be called with
DDC adapters that aren't part of a drm_dp_aux struct, we need to pass down
the drm_device to these functions instead of using drm_dp_aux.
Signed-off-by: Lyude Paul <lyude@redhat.com>
---
drivers/gpu/drm/drm_dp_dual_mode_helper.c | 4 +++-
drivers/gpu/drm/i915/display/intel_hdmi.c | 2 +-
drivers/gpu/drm/i915/display/intel_lspcon.c | 5 +++--
include/drm/drm_dp_dual_mode_helper.h | 4 +++-
4 files changed, 10 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/drm_dp_dual_mode_helper.c b/drivers/gpu/drm/drm_dp_dual_mode_helper.c
index 1c9ea9f7fdaf..9ee75c568c37 100644
--- a/drivers/gpu/drm/drm_dp_dual_mode_helper.c
+++ b/drivers/gpu/drm/drm_dp_dual_mode_helper.c
@@ -165,6 +165,7 @@ static bool is_lspcon_adaptor(const char hdmi_id[DP_DUAL_MODE_HDMI_ID_LEN],
/**
* drm_dp_dual_mode_detect - Identify the DP dual mode adaptor
+ * @dev: &drm_device to use
* @adapter: I2C adapter for the DDC bus
*
* Attempt to identify the type of the DP dual mode adaptor used.
@@ -178,7 +179,8 @@ static bool is_lspcon_adaptor(const char hdmi_id[DP_DUAL_MODE_HDMI_ID_LEN],
* Returns:
* The type of the DP dual mode adaptor used
*/
-enum drm_dp_dual_mode_type drm_dp_dual_mode_detect(struct i2c_adapter *adapter)
+enum drm_dp_dual_mode_type drm_dp_dual_mode_detect(const struct drm_device *dev,
+ struct i2c_adapter *adapter)
{
char hdmi_id[DP_DUAL_MODE_HDMI_ID_LEN] = {};
uint8_t adaptor_id = 0x00;
diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.c b/drivers/gpu/drm/i915/display/intel_hdmi.c
index d69f0a6dc26d..de092f6584c1 100644
--- a/drivers/gpu/drm/i915/display/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/display/intel_hdmi.c
@@ -2223,7 +2223,7 @@ intel_hdmi_dp_dual_mode_detect(struct drm_connector *connector, bool has_edid)
enum port port = hdmi_to_dig_port(hdmi)->base.port;
struct i2c_adapter *adapter =
intel_gmbus_get_adapter(dev_priv, hdmi->ddc_bus);
- enum drm_dp_dual_mode_type type = drm_dp_dual_mode_detect(adapter);
+ enum drm_dp_dual_mode_type type = drm_dp_dual_mode_detect(&dev_priv->drm, adapter);
/*
* Type 1 DVI adaptors are not required to implement any
diff --git a/drivers/gpu/drm/i915/display/intel_lspcon.c b/drivers/gpu/drm/i915/display/intel_lspcon.c
index e4ff533e3a69..ca25044e7d1b 100644
--- a/drivers/gpu/drm/i915/display/intel_lspcon.c
+++ b/drivers/gpu/drm/i915/display/intel_lspcon.c
@@ -221,7 +221,8 @@ static bool lspcon_probe(struct intel_lspcon *lspcon)
{
int retry;
enum drm_dp_dual_mode_type adaptor_type;
- struct i2c_adapter *adapter = &lspcon_to_intel_dp(lspcon)->aux.ddc;
+ struct intel_dp *intel_dp = lspcon_to_intel_dp(lspcon);
+ struct i2c_adapter *adapter = &intel_dp->aux.ddc;
enum drm_lspcon_mode expected_mode;
expected_mode = lspcon_wake_native_aux_ch(lspcon) ?
@@ -232,7 +233,7 @@ static bool lspcon_probe(struct intel_lspcon *lspcon)
if (retry)
usleep_range(500, 1000);
- adaptor_type = drm_dp_dual_mode_detect(adapter);
+ adaptor_type = drm_dp_dual_mode_detect(intel_dp->aux.drm_dev, adapter);
if (adaptor_type == DRM_DP_DUAL_MODE_LSPCON)
break;
}
diff --git a/include/drm/drm_dp_dual_mode_helper.h b/include/drm/drm_dp_dual_mode_helper.h
index 4c42db81fcb4..23ce849152f3 100644
--- a/include/drm/drm_dp_dual_mode_helper.h
+++ b/include/drm/drm_dp_dual_mode_helper.h
@@ -62,6 +62,7 @@
#define DP_DUAL_MODE_LSPCON_CURRENT_MODE 0x41
#define DP_DUAL_MODE_LSPCON_MODE_PCON 0x1
+struct drm_device;
struct i2c_adapter;
ssize_t drm_dp_dual_mode_read(struct i2c_adapter *adapter,
@@ -103,7 +104,8 @@ enum drm_dp_dual_mode_type {
DRM_DP_DUAL_MODE_LSPCON,
};
-enum drm_dp_dual_mode_type drm_dp_dual_mode_detect(struct i2c_adapter *adapter);
+enum drm_dp_dual_mode_type
+drm_dp_dual_mode_detect(const struct drm_device *dev, struct i2c_adapter *adapter);
int drm_dp_dual_mode_max_tmds_clock(enum drm_dp_dual_mode_type type,
struct i2c_adapter *adapter);
int drm_dp_dual_mode_get_tmds_output(enum drm_dp_dual_mode_type type,
--
2.30.2
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply related [flat|nested] 32+ messages in thread* [Nouveau] [PATCH v2 12/20] drm/dp_dual_mode: Pass drm_device to drm_dp_dual_mode_set_tmds_output()
2021-03-26 20:37 [Nouveau] [PATCH v2 00/20] drm: Use new DRM printk funcs (like drm_dbg_*()) in DP helpers Lyude Paul
` (10 preceding siblings ...)
2021-03-26 20:37 ` [Nouveau] [PATCH v2 11/20] drm/dp_dual_mode: Pass drm_device to drm_dp_dual_mode_detect() Lyude Paul
@ 2021-03-26 20:37 ` Lyude Paul
2021-03-26 20:38 ` [Nouveau] [PATCH v2 13/20] drm/dp_dual_mode: Pass drm_device to drm_dp_dual_mode_max_tmds_clock() Lyude Paul
` (8 subsequent siblings)
20 siblings, 0 replies; 32+ messages in thread
From: Lyude Paul @ 2021-03-26 20:37 UTC (permalink / raw)
To: nouveau, dri-devel, amd-gfx, intel-gfx
Cc: Lucas De Marchi, Anshuman Gupta, David Airlie, Ramalingam C,
Joonas Lahtinen, Maarten Lankhorst, open list, Jani Nikula,
Uma Shankar, Sean Paul, Maxime Ripard, Daniel Vetter,
Rodrigo Vivi, Oliver Barta, Matt Roper, Ankit Nautiyal,
Ville Syrjälä
Another function that we'll need to pass a drm_device (and not drm_dp_aux)
down to so that we can move over to using drm_dbg_*().
Signed-off-by: Lyude Paul <lyude@redhat.com>
---
drivers/gpu/drm/drm_dp_dual_mode_helper.c | 3 ++-
drivers/gpu/drm/i915/display/intel_hdmi.c | 3 +--
include/drm/drm_dp_dual_mode_helper.h | 2 +-
3 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/drm_dp_dual_mode_helper.c b/drivers/gpu/drm/drm_dp_dual_mode_helper.c
index 9ee75c568c37..a63d7de85309 100644
--- a/drivers/gpu/drm/drm_dp_dual_mode_helper.c
+++ b/drivers/gpu/drm/drm_dp_dual_mode_helper.c
@@ -336,6 +336,7 @@ EXPORT_SYMBOL(drm_dp_dual_mode_get_tmds_output);
/**
* drm_dp_dual_mode_set_tmds_output - Enable/disable TMDS output buffers in the DP dual mode adaptor
+ * @dev: &drm_device to use
* @type: DP dual mode adaptor type
* @adapter: I2C adapter for the DDC bus
* @enable: enable (as opposed to disable) the TMDS output buffers
@@ -349,7 +350,7 @@ EXPORT_SYMBOL(drm_dp_dual_mode_get_tmds_output);
* Returns:
* 0 on success, negative error code on failure
*/
-int drm_dp_dual_mode_set_tmds_output(enum drm_dp_dual_mode_type type,
+int drm_dp_dual_mode_set_tmds_output(const struct drm_device *dev, enum drm_dp_dual_mode_type type,
struct i2c_adapter *adapter, bool enable)
{
uint8_t tmds_oen = enable ? 0 : DP_DUAL_MODE_TMDS_DISABLE;
diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.c b/drivers/gpu/drm/i915/display/intel_hdmi.c
index de092f6584c1..fdc43f545cad 100644
--- a/drivers/gpu/drm/i915/display/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/display/intel_hdmi.c
@@ -1251,8 +1251,7 @@ void intel_dp_dual_mode_set_tmds_output(struct intel_hdmi *hdmi, bool enable)
drm_dbg_kms(&dev_priv->drm, "%s DP dual mode adaptor TMDS output\n",
enable ? "Enabling" : "Disabling");
- drm_dp_dual_mode_set_tmds_output(hdmi->dp_dual_mode.type,
- adapter, enable);
+ drm_dp_dual_mode_set_tmds_output(&dev_priv->drm, hdmi->dp_dual_mode.type, adapter, enable);
}
static int intel_hdmi_hdcp_read(struct intel_digital_port *dig_port,
diff --git a/include/drm/drm_dp_dual_mode_helper.h b/include/drm/drm_dp_dual_mode_helper.h
index 23ce849152f3..8cb0dcd98a99 100644
--- a/include/drm/drm_dp_dual_mode_helper.h
+++ b/include/drm/drm_dp_dual_mode_helper.h
@@ -110,7 +110,7 @@ int drm_dp_dual_mode_max_tmds_clock(enum drm_dp_dual_mode_type type,
struct i2c_adapter *adapter);
int drm_dp_dual_mode_get_tmds_output(enum drm_dp_dual_mode_type type,
struct i2c_adapter *adapter, bool *enabled);
-int drm_dp_dual_mode_set_tmds_output(enum drm_dp_dual_mode_type type,
+int drm_dp_dual_mode_set_tmds_output(const struct drm_device *dev, enum drm_dp_dual_mode_type type,
struct i2c_adapter *adapter, bool enable);
const char *drm_dp_get_dual_mode_type_name(enum drm_dp_dual_mode_type type);
--
2.30.2
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply related [flat|nested] 32+ messages in thread* [Nouveau] [PATCH v2 13/20] drm/dp_dual_mode: Pass drm_device to drm_dp_dual_mode_max_tmds_clock()
2021-03-26 20:37 [Nouveau] [PATCH v2 00/20] drm: Use new DRM printk funcs (like drm_dbg_*()) in DP helpers Lyude Paul
` (11 preceding siblings ...)
2021-03-26 20:37 ` [Nouveau] [PATCH v2 12/20] drm/dp_dual_mode: Pass drm_device to drm_dp_dual_mode_set_tmds_output() Lyude Paul
@ 2021-03-26 20:38 ` Lyude Paul
2021-03-26 20:38 ` [Nouveau] [PATCH v2 14/20] drm/dp_dual_mode: Pass drm_device to drm_dp_dual_mode_get_tmds_output() Lyude Paul
` (7 subsequent siblings)
20 siblings, 0 replies; 32+ messages in thread
From: Lyude Paul @ 2021-03-26 20:38 UTC (permalink / raw)
To: nouveau, dri-devel, amd-gfx, intel-gfx
Cc: Lucas De Marchi, Anshuman Gupta, David Airlie, Ramalingam C,
Joonas Lahtinen, Maarten Lankhorst, open list, Jani Nikula,
Uma Shankar, Sean Paul, Maxime Ripard, Daniel Vetter,
Rodrigo Vivi, Oliver Barta, Matt Roper, Ankit Nautiyal,
Ville Syrjälä
Another function we need to pass drm_device down to in order to start using
drm_dbg_*().
Signed-off-by: Lyude Paul <lyude@redhat.com>
---
drivers/gpu/drm/drm_dp_dual_mode_helper.c | 3 ++-
drivers/gpu/drm/i915/display/intel_hdmi.c | 2 +-
include/drm/drm_dp_dual_mode_helper.h | 2 +-
3 files changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/drm_dp_dual_mode_helper.c b/drivers/gpu/drm/drm_dp_dual_mode_helper.c
index a63d7de85309..4a26b3e1f78f 100644
--- a/drivers/gpu/drm/drm_dp_dual_mode_helper.c
+++ b/drivers/gpu/drm/drm_dp_dual_mode_helper.c
@@ -252,6 +252,7 @@ EXPORT_SYMBOL(drm_dp_dual_mode_detect);
/**
* drm_dp_dual_mode_max_tmds_clock - Max TMDS clock for DP dual mode adaptor
+ * @dev: &drm_device to use
* @type: DP dual mode adaptor type
* @adapter: I2C adapter for the DDC bus
*
@@ -265,7 +266,7 @@ EXPORT_SYMBOL(drm_dp_dual_mode_detect);
* Returns:
* Maximum supported TMDS clock rate for the DP dual mode adaptor in kHz.
*/
-int drm_dp_dual_mode_max_tmds_clock(enum drm_dp_dual_mode_type type,
+int drm_dp_dual_mode_max_tmds_clock(const struct drm_device *dev, enum drm_dp_dual_mode_type type,
struct i2c_adapter *adapter)
{
uint8_t max_tmds_clock;
diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.c b/drivers/gpu/drm/i915/display/intel_hdmi.c
index fdc43f545cad..9c172dd6fb5b 100644
--- a/drivers/gpu/drm/i915/display/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/display/intel_hdmi.c
@@ -2255,7 +2255,7 @@ intel_hdmi_dp_dual_mode_detect(struct drm_connector *connector, bool has_edid)
hdmi->dp_dual_mode.type = type;
hdmi->dp_dual_mode.max_tmds_clock =
- drm_dp_dual_mode_max_tmds_clock(type, adapter);
+ drm_dp_dual_mode_max_tmds_clock(&dev_priv->drm, type, adapter);
drm_dbg_kms(&dev_priv->drm,
"DP dual mode adaptor (%s) detected (max TMDS clock: %d kHz)\n",
diff --git a/include/drm/drm_dp_dual_mode_helper.h b/include/drm/drm_dp_dual_mode_helper.h
index 8cb0dcd98a99..aabf9c951380 100644
--- a/include/drm/drm_dp_dual_mode_helper.h
+++ b/include/drm/drm_dp_dual_mode_helper.h
@@ -106,7 +106,7 @@ enum drm_dp_dual_mode_type {
enum drm_dp_dual_mode_type
drm_dp_dual_mode_detect(const struct drm_device *dev, struct i2c_adapter *adapter);
-int drm_dp_dual_mode_max_tmds_clock(enum drm_dp_dual_mode_type type,
+int drm_dp_dual_mode_max_tmds_clock(const struct drm_device *dev, enum drm_dp_dual_mode_type type,
struct i2c_adapter *adapter);
int drm_dp_dual_mode_get_tmds_output(enum drm_dp_dual_mode_type type,
struct i2c_adapter *adapter, bool *enabled);
--
2.30.2
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply related [flat|nested] 32+ messages in thread* [Nouveau] [PATCH v2 14/20] drm/dp_dual_mode: Pass drm_device to drm_dp_dual_mode_get_tmds_output()
2021-03-26 20:37 [Nouveau] [PATCH v2 00/20] drm: Use new DRM printk funcs (like drm_dbg_*()) in DP helpers Lyude Paul
` (12 preceding siblings ...)
2021-03-26 20:38 ` [Nouveau] [PATCH v2 13/20] drm/dp_dual_mode: Pass drm_device to drm_dp_dual_mode_max_tmds_clock() Lyude Paul
@ 2021-03-26 20:38 ` Lyude Paul
2021-03-26 20:38 ` [Nouveau] [PATCH v2 15/20] drm/dp_dual_mode: Pass drm_device to drm_lspcon_(get|set)_mode() Lyude Paul
` (6 subsequent siblings)
20 siblings, 0 replies; 32+ messages in thread
From: Lyude Paul @ 2021-03-26 20:38 UTC (permalink / raw)
To: nouveau, dri-devel, amd-gfx, intel-gfx
Cc: David Airlie, Maarten Lankhorst, open list, Maxime Ripard, Daniel Vetter
Another function to pass drm_device * down to so we can start using the
drm_dbg_*() in the DRM DP helpers.
Signed-off-by: Lyude Paul <lyude@redhat.com>
---
drivers/gpu/drm/drm_dp_dual_mode_helper.c | 5 +++--
include/drm/drm_dp_dual_mode_helper.h | 2 +-
2 files changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/drm_dp_dual_mode_helper.c b/drivers/gpu/drm/drm_dp_dual_mode_helper.c
index 4a26b3e1f78f..c9c2952bcad2 100644
--- a/drivers/gpu/drm/drm_dp_dual_mode_helper.c
+++ b/drivers/gpu/drm/drm_dp_dual_mode_helper.c
@@ -296,6 +296,7 @@ EXPORT_SYMBOL(drm_dp_dual_mode_max_tmds_clock);
/**
* drm_dp_dual_mode_get_tmds_output - Get the state of the TMDS output buffers in the DP dual mode adaptor
+ * @dev: &drm_device to use
* @type: DP dual mode adaptor type
* @adapter: I2C adapter for the DDC bus
* @enabled: current state of the TMDS output buffers
@@ -310,8 +311,8 @@ EXPORT_SYMBOL(drm_dp_dual_mode_max_tmds_clock);
* Returns:
* 0 on success, negative error code on failure
*/
-int drm_dp_dual_mode_get_tmds_output(enum drm_dp_dual_mode_type type,
- struct i2c_adapter *adapter,
+int drm_dp_dual_mode_get_tmds_output(const struct drm_device *dev,
+ enum drm_dp_dual_mode_type type, struct i2c_adapter *adapter,
bool *enabled)
{
uint8_t tmds_oen;
diff --git a/include/drm/drm_dp_dual_mode_helper.h b/include/drm/drm_dp_dual_mode_helper.h
index aabf9c951380..01eec9ff5962 100644
--- a/include/drm/drm_dp_dual_mode_helper.h
+++ b/include/drm/drm_dp_dual_mode_helper.h
@@ -108,7 +108,7 @@ enum drm_dp_dual_mode_type
drm_dp_dual_mode_detect(const struct drm_device *dev, struct i2c_adapter *adapter);
int drm_dp_dual_mode_max_tmds_clock(const struct drm_device *dev, enum drm_dp_dual_mode_type type,
struct i2c_adapter *adapter);
-int drm_dp_dual_mode_get_tmds_output(enum drm_dp_dual_mode_type type,
+int drm_dp_dual_mode_get_tmds_output(const struct drm_device *dev, enum drm_dp_dual_mode_type type,
struct i2c_adapter *adapter, bool *enabled);
int drm_dp_dual_mode_set_tmds_output(const struct drm_device *dev, enum drm_dp_dual_mode_type type,
struct i2c_adapter *adapter, bool enable);
--
2.30.2
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply related [flat|nested] 32+ messages in thread* [Nouveau] [PATCH v2 15/20] drm/dp_dual_mode: Pass drm_device to drm_lspcon_(get|set)_mode()
2021-03-26 20:37 [Nouveau] [PATCH v2 00/20] drm: Use new DRM printk funcs (like drm_dbg_*()) in DP helpers Lyude Paul
` (13 preceding siblings ...)
2021-03-26 20:38 ` [Nouveau] [PATCH v2 14/20] drm/dp_dual_mode: Pass drm_device to drm_dp_dual_mode_get_tmds_output() Lyude Paul
@ 2021-03-26 20:38 ` Lyude Paul
2021-03-26 20:38 ` [Nouveau] [PATCH v2 16/20] drm/dp_mst: Pass drm_dp_mst_topology_mgr to drm_dp_get_vc_payload_bw() Lyude Paul
` (5 subsequent siblings)
20 siblings, 0 replies; 32+ messages in thread
From: Lyude Paul @ 2021-03-26 20:38 UTC (permalink / raw)
To: nouveau, dri-devel, amd-gfx, intel-gfx
Cc: Kai-Heng Feng, David Airlie, Lucas De Marchi, Joonas Lahtinen,
Maarten Lankhorst, open list, Jani Nikula, Uma Shankar,
Maxime Ripard, Daniel Vetter, Rodrigo Vivi,
Ville Syrjälä
So that we can start using drm_dbg_*() throughout the DRM DP helpers.
Signed-off-by: Lyude Paul <lyude@redhat.com>
---
drivers/gpu/drm/drm_dp_dual_mode_helper.c | 8 +++++---
drivers/gpu/drm/i915/display/intel_lspcon.c | 12 +++++++-----
include/drm/drm_dp_dual_mode_helper.h | 4 ++--
3 files changed, 14 insertions(+), 10 deletions(-)
diff --git a/drivers/gpu/drm/drm_dp_dual_mode_helper.c b/drivers/gpu/drm/drm_dp_dual_mode_helper.c
index c9c2952bcad2..dbf9b1fdec63 100644
--- a/drivers/gpu/drm/drm_dp_dual_mode_helper.c
+++ b/drivers/gpu/drm/drm_dp_dual_mode_helper.c
@@ -430,6 +430,7 @@ EXPORT_SYMBOL(drm_dp_get_dual_mode_type_name);
/**
* drm_lspcon_get_mode: Get LSPCON's current mode of operation by
* reading offset (0x80, 0x41)
+ * @dev: &drm_device to use
* @adapter: I2C-over-aux adapter
* @mode: current lspcon mode of operation output variable
*
@@ -437,7 +438,7 @@ EXPORT_SYMBOL(drm_dp_get_dual_mode_type_name);
* 0 on success, sets the current_mode value to appropriate mode
* -error on failure
*/
-int drm_lspcon_get_mode(struct i2c_adapter *adapter,
+int drm_lspcon_get_mode(const struct drm_device *dev, struct i2c_adapter *adapter,
enum drm_lspcon_mode *mode)
{
u8 data;
@@ -477,13 +478,14 @@ EXPORT_SYMBOL(drm_lspcon_get_mode);
/**
* drm_lspcon_set_mode: Change LSPCON's mode of operation by
* writing offset (0x80, 0x40)
+ * @dev: &drm_device to use
* @adapter: I2C-over-aux adapter
* @mode: required mode of operation
*
* Returns:
* 0 on success, -error on failure/timeout
*/
-int drm_lspcon_set_mode(struct i2c_adapter *adapter,
+int drm_lspcon_set_mode(const struct drm_device *dev, struct i2c_adapter *adapter,
enum drm_lspcon_mode mode)
{
u8 data = 0;
@@ -508,7 +510,7 @@ int drm_lspcon_set_mode(struct i2c_adapter *adapter,
* so wait and retry until time out or done.
*/
do {
- ret = drm_lspcon_get_mode(adapter, ¤t_mode);
+ ret = drm_lspcon_get_mode(dev, adapter, ¤t_mode);
if (ret) {
DRM_ERROR("can't confirm LSPCON mode change\n");
return ret;
diff --git a/drivers/gpu/drm/i915/display/intel_lspcon.c b/drivers/gpu/drm/i915/display/intel_lspcon.c
index ca25044e7d1b..ec0048024746 100644
--- a/drivers/gpu/drm/i915/display/intel_lspcon.c
+++ b/drivers/gpu/drm/i915/display/intel_lspcon.c
@@ -139,10 +139,11 @@ void lspcon_detect_hdr_capability(struct intel_lspcon *lspcon)
static enum drm_lspcon_mode lspcon_get_current_mode(struct intel_lspcon *lspcon)
{
+ struct intel_dp *intel_dp = lspcon_to_intel_dp(lspcon);
enum drm_lspcon_mode current_mode;
- struct i2c_adapter *adapter = &lspcon_to_intel_dp(lspcon)->aux.ddc;
+ struct i2c_adapter *adapter = &intel_dp->aux.ddc;
- if (drm_lspcon_get_mode(adapter, ¤t_mode)) {
+ if (drm_lspcon_get_mode(intel_dp->aux.drm_dev, adapter, ¤t_mode)) {
DRM_DEBUG_KMS("Error reading LSPCON mode\n");
return DRM_LSPCON_MODE_INVALID;
}
@@ -175,11 +176,12 @@ static enum drm_lspcon_mode lspcon_wait_mode(struct intel_lspcon *lspcon,
static int lspcon_change_mode(struct intel_lspcon *lspcon,
enum drm_lspcon_mode mode)
{
+ struct intel_dp *intel_dp = lspcon_to_intel_dp(lspcon);
int err;
enum drm_lspcon_mode current_mode;
- struct i2c_adapter *adapter = &lspcon_to_intel_dp(lspcon)->aux.ddc;
+ struct i2c_adapter *adapter = &intel_dp->aux.ddc;
- err = drm_lspcon_get_mode(adapter, ¤t_mode);
+ err = drm_lspcon_get_mode(intel_dp->aux.drm_dev, adapter, ¤t_mode);
if (err) {
DRM_ERROR("Error reading LSPCON mode\n");
return err;
@@ -190,7 +192,7 @@ static int lspcon_change_mode(struct intel_lspcon *lspcon,
return 0;
}
- err = drm_lspcon_set_mode(adapter, mode);
+ err = drm_lspcon_set_mode(intel_dp->aux.drm_dev, adapter, mode);
if (err < 0) {
DRM_ERROR("LSPCON mode change failed\n");
return err;
diff --git a/include/drm/drm_dp_dual_mode_helper.h b/include/drm/drm_dp_dual_mode_helper.h
index 01eec9ff5962..7ee482265087 100644
--- a/include/drm/drm_dp_dual_mode_helper.h
+++ b/include/drm/drm_dp_dual_mode_helper.h
@@ -114,8 +114,8 @@ int drm_dp_dual_mode_set_tmds_output(const struct drm_device *dev, enum drm_dp_d
struct i2c_adapter *adapter, bool enable);
const char *drm_dp_get_dual_mode_type_name(enum drm_dp_dual_mode_type type);
-int drm_lspcon_get_mode(struct i2c_adapter *adapter,
+int drm_lspcon_get_mode(const struct drm_device *dev, struct i2c_adapter *adapter,
enum drm_lspcon_mode *current_mode);
-int drm_lspcon_set_mode(struct i2c_adapter *adapter,
+int drm_lspcon_set_mode(const struct drm_device *dev, struct i2c_adapter *adapter,
enum drm_lspcon_mode reqd_mode);
#endif
--
2.30.2
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply related [flat|nested] 32+ messages in thread* [Nouveau] [PATCH v2 16/20] drm/dp_mst: Pass drm_dp_mst_topology_mgr to drm_dp_get_vc_payload_bw()
2021-03-26 20:37 [Nouveau] [PATCH v2 00/20] drm: Use new DRM printk funcs (like drm_dbg_*()) in DP helpers Lyude Paul
` (14 preceding siblings ...)
2021-03-26 20:38 ` [Nouveau] [PATCH v2 15/20] drm/dp_dual_mode: Pass drm_device to drm_lspcon_(get|set)_mode() Lyude Paul
@ 2021-03-26 20:38 ` Lyude Paul
2021-03-26 20:38 ` [Nouveau] [PATCH v2 17/20] drm/dp: Convert drm_dp_helper.c to using drm_err/drm_dbg_*() Lyude Paul
` (4 subsequent siblings)
20 siblings, 0 replies; 32+ messages in thread
From: Lyude Paul @ 2021-03-26 20:38 UTC (permalink / raw)
To: nouveau, dri-devel, amd-gfx, intel-gfx
Cc: Lucas De Marchi, Anshuman Gupta, David Airlie, Ramalingam C,
Imre Deak, Joonas Lahtinen, Maarten Lankhorst, open list,
Jani Nikula, Matt Roper, Sean Paul, Maxime Ripard, Daniel Vetter,
Rodrigo Vivi, Lee Shawn C, Ville Syrjälä
Since this is one of the few functions in drm_dp_mst_topology.c that
doesn't have any way of getting access to a drm_device, let's pass the
drm_dp_mst_topology_mgr down to this function so that it can use
drm_dbg_kms().
Signed-off-by: Lyude Paul <lyude@redhat.com>
---
drivers/gpu/drm/drm_dp_mst_topology.c | 7 +++++--
drivers/gpu/drm/i915/display/intel_dp_mst.c | 3 ++-
include/drm/drm_dp_mst_helper.h | 3 ++-
3 files changed, 9 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c
index 1a7a8b085de4..ec2285595c33 100644
--- a/drivers/gpu/drm/drm_dp_mst_topology.c
+++ b/drivers/gpu/drm/drm_dp_mst_topology.c
@@ -3638,6 +3638,7 @@ static int drm_dp_send_up_ack_reply(struct drm_dp_mst_topology_mgr *mgr,
/**
* drm_dp_get_vc_payload_bw - get the VC payload BW for an MST link
+ * @mgr: The &drm_dp_mst_topology_mgr to use
* @link_rate: link rate in 10kbits/s units
* @link_lane_count: lane count
*
@@ -3646,7 +3647,8 @@ static int drm_dp_send_up_ack_reply(struct drm_dp_mst_topology_mgr *mgr,
* convert the number of PBNs required for a given stream to the number of
* timeslots this stream requires in each MTP.
*/
-int drm_dp_get_vc_payload_bw(int link_rate, int link_lane_count)
+int drm_dp_get_vc_payload_bw(const struct drm_dp_mst_topology_mgr *mgr,
+ int link_rate, int link_lane_count)
{
if (link_rate == 0 || link_lane_count == 0)
DRM_DEBUG_KMS("invalid link rate/lane count: (%d / %d)\n",
@@ -3711,7 +3713,8 @@ int drm_dp_mst_topology_mgr_set_mst(struct drm_dp_mst_topology_mgr *mgr, bool ms
goto out_unlock;
}
- mgr->pbn_div = drm_dp_get_vc_payload_bw(drm_dp_bw_code_to_link_rate(mgr->dpcd[1]),
+ mgr->pbn_div = drm_dp_get_vc_payload_bw(mgr,
+ drm_dp_bw_code_to_link_rate(mgr->dpcd[1]),
mgr->dpcd[2] & DP_MAX_LANE_COUNT_MASK);
if (mgr->pbn_div == 0) {
ret = -EINVAL;
diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c
index 2daa3f67791e..860381d68d9d 100644
--- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
+++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
@@ -70,7 +70,8 @@ static int intel_dp_mst_compute_link_config(struct intel_encoder *encoder,
slots = drm_dp_atomic_find_vcpi_slots(state, &intel_dp->mst_mgr,
connector->port,
crtc_state->pbn,
- drm_dp_get_vc_payload_bw(crtc_state->port_clock,
+ drm_dp_get_vc_payload_bw(&intel_dp->mst_mgr,
+ crtc_state->port_clock,
crtc_state->lane_count));
if (slots == -EDEADLK)
return slots;
diff --git a/include/drm/drm_dp_mst_helper.h b/include/drm/drm_dp_mst_helper.h
index bd1c39907b92..20dc705642bd 100644
--- a/include/drm/drm_dp_mst_helper.h
+++ b/include/drm/drm_dp_mst_helper.h
@@ -783,7 +783,8 @@ drm_dp_mst_detect_port(struct drm_connector *connector,
struct edid *drm_dp_mst_get_edid(struct drm_connector *connector, struct drm_dp_mst_topology_mgr *mgr, struct drm_dp_mst_port *port);
-int drm_dp_get_vc_payload_bw(int link_rate, int link_lane_count);
+int drm_dp_get_vc_payload_bw(const struct drm_dp_mst_topology_mgr *mgr,
+ int link_rate, int link_lane_count);
int drm_dp_calc_pbn_mode(int clock, int bpp, bool dsc);
--
2.30.2
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply related [flat|nested] 32+ messages in thread* [Nouveau] [PATCH v2 17/20] drm/dp: Convert drm_dp_helper.c to using drm_err/drm_dbg_*()
2021-03-26 20:37 [Nouveau] [PATCH v2 00/20] drm: Use new DRM printk funcs (like drm_dbg_*()) in DP helpers Lyude Paul
` (15 preceding siblings ...)
2021-03-26 20:38 ` [Nouveau] [PATCH v2 16/20] drm/dp_mst: Pass drm_dp_mst_topology_mgr to drm_dp_get_vc_payload_bw() Lyude Paul
@ 2021-03-26 20:38 ` Lyude Paul
2021-03-30 11:04 ` Robert Foss
2021-03-26 20:38 ` [Nouveau] [PATCH v2 18/20] drm/dp_dual_mode: Convert drm_dp_dual_mode_helper.c to using drm_err/drm_dbg_kms() Lyude Paul
` (3 subsequent siblings)
20 siblings, 1 reply; 32+ messages in thread
From: Lyude Paul @ 2021-03-26 20:38 UTC (permalink / raw)
To: nouveau, dri-devel, amd-gfx, intel-gfx
Cc: Daniel Vetter, David Airlie, Maarten Lankhorst, open list,
Maxime Ripard, Robert Foss
Now that we've added a back-pointer to drm_device to drm_dp_aux, made
drm_dp_aux available to any functions in drm_dp_helper.c which need to
print to the kernel log, and ensured all of our logging uses a consistent
format, let's do the final step of the conversion and actually move
everything over to using drm_err() and drm_dbg_*().
This was done by using the following cocci script:
@@
expression list expr;
@@
(
- DRM_DEBUG_KMS(expr);
+ drm_dbg_kms(aux->drm_dev, expr);
|
- DRM_DEBUG_DP(expr);
+ drm_dbg_dp(aux->drm_dev, expr);
|
- DRM_DEBUG_ATOMIC(expr);
+ drm_dbg_atomic(aux->drm_dev, expr);
|
- DRM_DEBUG_KMS_RATELIMITED(expr);
+ drm_dbg_kms_ratelimited(aux->drm_dev, expr);
|
- DRM_ERROR(expr);
+ drm_err(aux->drm_dev, expr);
)
Followed by correcting the resulting line-wrapping in the results by hand.
v2:
* Fix indenting in drm_dp_dump_access
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Robert Foss <robert.foss@linaro.org>
---
drivers/gpu/drm/drm_dp_helper.c | 121 ++++++++++++++++----------------
1 file changed, 59 insertions(+), 62 deletions(-)
diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c
index 54e19d7b9c51..4940db0bcaae 100644
--- a/drivers/gpu/drm/drm_dp_helper.c
+++ b/drivers/gpu/drm/drm_dp_helper.c
@@ -139,8 +139,8 @@ void drm_dp_link_train_clock_recovery_delay(const struct drm_dp_aux *aux,
DP_TRAINING_AUX_RD_MASK;
if (rd_interval > 4)
- DRM_DEBUG_KMS("%s: AUX interval %lu, out of range (max 4)\n",
- aux->name, rd_interval);
+ drm_dbg_kms(aux->drm_dev, "%s: AUX interval %lu, out of range (max 4)\n",
+ aux->name, rd_interval);
if (rd_interval == 0 || dpcd[DP_DPCD_REV] >= DP_DPCD_REV_14)
rd_interval = 100;
@@ -155,8 +155,8 @@ static void __drm_dp_link_train_channel_eq_delay(const struct drm_dp_aux *aux,
unsigned long rd_interval)
{
if (rd_interval > 4)
- DRM_DEBUG_KMS("%s: AUX interval %lu, out of range (max 4)\n",
- aux->name, rd_interval);
+ drm_dbg_kms(aux->drm_dev, "%s: AUX interval %lu, out of range (max 4)\n",
+ aux->name, rd_interval);
if (rd_interval == 0)
rd_interval = 400;
@@ -220,11 +220,11 @@ drm_dp_dump_access(const struct drm_dp_aux *aux,
const char *arrow = request == DP_AUX_NATIVE_READ ? "->" : "<-";
if (ret > 0)
- DRM_DEBUG_DP("%s: 0x%05x AUX %s (ret=%3d) %*ph\n",
- aux->name, offset, arrow, ret, min(ret, 20), buffer);
+ drm_dbg_dp(aux->drm_dev, "%s: 0x%05x AUX %s (ret=%3d) %*ph\n",
+ aux->name, offset, arrow, ret, min(ret, 20), buffer);
else
- DRM_DEBUG_DP("%s: 0x%05x AUX %s (ret=%3d)\n",
- aux->name, offset, arrow, ret);
+ drm_dbg_dp(aux->drm_dev, "%s: 0x%05x AUX %s (ret=%3d)\n",
+ aux->name, offset, arrow, ret);
}
/**
@@ -287,8 +287,8 @@ static int drm_dp_dpcd_access(struct drm_dp_aux *aux, u8 request,
err = ret;
}
- DRM_DEBUG_KMS("%s: Too many retries, giving up. First error: %d\n",
- aux->name, err);
+ drm_dbg_kms(aux->drm_dev, "%s: Too many retries, giving up. First error: %d\n",
+ aux->name, err);
ret = err;
unlock:
@@ -524,44 +524,44 @@ bool drm_dp_send_real_edid_checksum(struct drm_dp_aux *aux,
if (drm_dp_dpcd_read(aux, DP_DEVICE_SERVICE_IRQ_VECTOR,
&auto_test_req, 1) < 1) {
- DRM_ERROR("%s: DPCD failed read at register 0x%x\n",
- aux->name, DP_DEVICE_SERVICE_IRQ_VECTOR);
+ drm_err(aux->drm_dev, "%s: DPCD failed read at register 0x%x\n",
+ aux->name, DP_DEVICE_SERVICE_IRQ_VECTOR);
return false;
}
auto_test_req &= DP_AUTOMATED_TEST_REQUEST;
if (drm_dp_dpcd_read(aux, DP_TEST_REQUEST, &link_edid_read, 1) < 1) {
- DRM_ERROR("%s: DPCD failed read at register 0x%x\n",
- aux->name, DP_TEST_REQUEST);
+ drm_err(aux->drm_dev, "%s: DPCD failed read at register 0x%x\n",
+ aux->name, DP_TEST_REQUEST);
return false;
}
link_edid_read &= DP_TEST_LINK_EDID_READ;
if (!auto_test_req || !link_edid_read) {
- DRM_DEBUG_KMS("%s: Source DUT does not support TEST_EDID_READ\n",
- aux->name);
+ drm_dbg_kms(aux->drm_dev, "%s: Source DUT does not support TEST_EDID_READ\n",
+ aux->name);
return false;
}
if (drm_dp_dpcd_write(aux, DP_DEVICE_SERVICE_IRQ_VECTOR,
&auto_test_req, 1) < 1) {
- DRM_ERROR("%s: DPCD failed write at register 0x%x\n",
- aux->name, DP_DEVICE_SERVICE_IRQ_VECTOR);
+ drm_err(aux->drm_dev, "%s: DPCD failed write at register 0x%x\n",
+ aux->name, DP_DEVICE_SERVICE_IRQ_VECTOR);
return false;
}
/* send back checksum for the last edid extension block data */
if (drm_dp_dpcd_write(aux, DP_TEST_EDID_CHECKSUM,
&real_edid_checksum, 1) < 1) {
- DRM_ERROR("%s: DPCD failed write at register 0x%x\n",
- aux->name, DP_TEST_EDID_CHECKSUM);
+ drm_err(aux->drm_dev, "%s: DPCD failed write at register 0x%x\n",
+ aux->name, DP_TEST_EDID_CHECKSUM);
return false;
}
test_resp |= DP_TEST_EDID_CHECKSUM_WRITE;
if (drm_dp_dpcd_write(aux, DP_TEST_RESPONSE, &test_resp, 1) < 1) {
- DRM_ERROR("%s: DPCD failed write at register 0x%x\n",
- aux->name, DP_TEST_RESPONSE);
+ drm_err(aux->drm_dev, "%s: DPCD failed write at register 0x%x\n",
+ aux->name, DP_TEST_RESPONSE);
return false;
}
@@ -604,17 +604,16 @@ static int drm_dp_read_extended_dpcd_caps(struct drm_dp_aux *aux,
return -EIO;
if (dpcd[DP_DPCD_REV] > dpcd_ext[DP_DPCD_REV]) {
- DRM_DEBUG_KMS("%s: Extended DPCD rev less than base DPCD rev (%d > %d)\n",
- aux->name, dpcd[DP_DPCD_REV],
- dpcd_ext[DP_DPCD_REV]);
+ drm_dbg_kms(aux->drm_dev,
+ "%s: Extended DPCD rev less than base DPCD rev (%d > %d)\n",
+ aux->name, dpcd[DP_DPCD_REV], dpcd_ext[DP_DPCD_REV]);
return 0;
}
if (!memcmp(dpcd, dpcd_ext, sizeof(dpcd_ext)))
return 0;
- DRM_DEBUG_KMS("%s: Base DPCD: %*ph\n",
- aux->name, DP_RECEIVER_CAP_SIZE, dpcd);
+ drm_dbg_kms(aux->drm_dev, "%s: Base DPCD: %*ph\n", aux->name, DP_RECEIVER_CAP_SIZE, dpcd);
memcpy(dpcd, dpcd_ext, sizeof(dpcd_ext));
@@ -649,8 +648,7 @@ int drm_dp_read_dpcd_caps(struct drm_dp_aux *aux,
if (ret < 0)
return ret;
- DRM_DEBUG_KMS("%s: DPCD: %*ph\n",
- aux->name, DP_RECEIVER_CAP_SIZE, dpcd);
+ drm_dbg_kms(aux->drm_dev, "%s: DPCD: %*ph\n", aux->name, DP_RECEIVER_CAP_SIZE, dpcd);
return ret;
}
@@ -694,8 +692,7 @@ int drm_dp_read_downstream_info(struct drm_dp_aux *aux,
if (ret != len)
return -EIO;
- DRM_DEBUG_KMS("%s: DPCD DFP: %*ph\n",
- aux->name, len, downstream_ports);
+ drm_dbg_kms(aux->drm_dev, "%s: DPCD DFP: %*ph\n", aux->name, len, downstream_ports);
return 0;
}
@@ -1412,11 +1409,11 @@ static int drm_dp_i2c_do_msg(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg)
* Avoid spamming the kernel log with timeout errors.
*/
if (ret == -ETIMEDOUT)
- DRM_DEBUG_KMS_RATELIMITED("%s: transaction timed out\n",
- aux->name);
+ drm_dbg_kms_ratelimited(aux->drm_dev, "%s: transaction timed out\n",
+ aux->name);
else
- DRM_DEBUG_KMS("%s: transaction failed: %d\n",
- aux->name, ret);
+ drm_dbg_kms(aux->drm_dev, "%s: transaction failed: %d\n",
+ aux->name, ret);
return ret;
}
@@ -1430,12 +1427,12 @@ static int drm_dp_i2c_do_msg(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg)
break;
case DP_AUX_NATIVE_REPLY_NACK:
- DRM_DEBUG_KMS("%s: native nack (result=%d, size=%zu)\n",
- aux->name, ret, msg->size);
+ drm_dbg_kms(aux->drm_dev, "%s: native nack (result=%d, size=%zu)\n",
+ aux->name, ret, msg->size);
return -EREMOTEIO;
case DP_AUX_NATIVE_REPLY_DEFER:
- DRM_DEBUG_KMS("%s: native defer\n", aux->name);
+ drm_dbg_kms(aux->drm_dev, "%s: native defer\n", aux->name);
/*
* We could check for I2C bit rate capabilities and if
* available adjust this interval. We could also be
@@ -1449,8 +1446,8 @@ static int drm_dp_i2c_do_msg(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg)
continue;
default:
- DRM_ERROR("%s: invalid native reply %#04x\n",
- aux->name, msg->reply);
+ drm_err(aux->drm_dev, "%s: invalid native reply %#04x\n",
+ aux->name, msg->reply);
return -EREMOTEIO;
}
@@ -1465,13 +1462,13 @@ static int drm_dp_i2c_do_msg(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg)
return ret;
case DP_AUX_I2C_REPLY_NACK:
- DRM_DEBUG_KMS("%s: I2C nack (result=%d, size=%zu)\n",
- aux->name, ret, msg->size);
+ drm_dbg_kms(aux->drm_dev, "%s: I2C nack (result=%d, size=%zu)\n",
+ aux->name, ret, msg->size);
aux->i2c_nack_count++;
return -EREMOTEIO;
case DP_AUX_I2C_REPLY_DEFER:
- DRM_DEBUG_KMS("%s: I2C defer\n", aux->name);
+ drm_dbg_kms(aux->drm_dev, "%s: I2C defer\n", aux->name);
/* DP Compliance Test 4.2.2.5 Requirement:
* Must have at least 7 retries for I2C defers on the
* transaction to pass this test
@@ -1485,13 +1482,13 @@ static int drm_dp_i2c_do_msg(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg)
continue;
default:
- DRM_ERROR("%s: invalid I2C reply %#04x\n",
- aux->name, msg->reply);
+ drm_err(aux->drm_dev, "%s: invalid I2C reply %#04x\n",
+ aux->name, msg->reply);
return -EREMOTEIO;
}
}
- DRM_DEBUG_KMS("%s: Too many retries, giving up\n", aux->name);
+ drm_dbg_kms(aux->drm_dev, "%s: Too many retries, giving up\n", aux->name);
return -EREMOTEIO;
}
@@ -1520,8 +1517,9 @@ static int drm_dp_i2c_drain_msg(struct drm_dp_aux *aux, struct drm_dp_aux_msg *o
return err == 0 ? -EPROTO : err;
if (err < msg.size && err < ret) {
- DRM_DEBUG_KMS("%s: Partial I2C reply: requested %zu bytes got %d bytes\n",
- aux->name, msg.size, err);
+ drm_dbg_kms(aux->drm_dev,
+ "%s: Partial I2C reply: requested %zu bytes got %d bytes\n",
+ aux->name, msg.size, err);
ret = err;
}
@@ -1700,12 +1698,11 @@ static void drm_dp_aux_crc_work(struct work_struct *work)
}
if (ret == -EAGAIN) {
- DRM_DEBUG_KMS("%s: Get CRC failed after retrying: %d\n",
- aux->name, ret);
+ drm_dbg_kms(aux->drm_dev, "%s: Get CRC failed after retrying: %d\n",
+ aux->name, ret);
continue;
} else if (ret) {
- DRM_DEBUG_KMS("%s: Failed to get a CRC: %d\n",
- aux->name, ret);
+ drm_dbg_kms(aux->drm_dev, "%s: Failed to get a CRC: %d\n", aux->name, ret);
continue;
}
@@ -2006,13 +2003,12 @@ int drm_dp_read_desc(struct drm_dp_aux *aux, struct drm_dp_desc *desc,
dev_id_len = strnlen(ident->device_id, sizeof(ident->device_id));
- DRM_DEBUG_KMS("%s: DP %s: OUI %*phD dev-ID %*pE HW-rev %d.%d SW-rev %d.%d quirks 0x%04x\n",
- aux->name, is_branch ? "branch" : "sink",
- (int)sizeof(ident->oui), ident->oui,
- dev_id_len, ident->device_id,
- ident->hw_rev >> 4, ident->hw_rev & 0xf,
- ident->sw_major_rev, ident->sw_minor_rev,
- desc->quirks);
+ drm_dbg_kms(aux->drm_dev,
+ "%s: DP %s: OUI %*phD dev-ID %*pE HW-rev %d.%d SW-rev %d.%d quirks 0x%04x\n",
+ aux->name, is_branch ? "branch" : "sink",
+ (int)sizeof(ident->oui), ident->oui, dev_id_len,
+ ident->device_id, ident->hw_rev >> 4, ident->hw_rev & 0xf,
+ ident->sw_major_rev, ident->sw_minor_rev, desc->quirks);
return 0;
}
@@ -2774,7 +2770,8 @@ int drm_dp_pcon_frl_enable(struct drm_dp_aux *aux)
if (ret < 0)
return ret;
if (!(buf & DP_PCON_ENABLE_SOURCE_CTL_MODE)) {
- DRM_DEBUG_KMS("%s: PCON in Autonomous mode, can't enable FRL\n", aux->name);
+ drm_dbg_kms(aux->drm_dev, "%s: PCON in Autonomous mode, can't enable FRL\n",
+ aux->name);
return -EINVAL;
}
buf |= DP_PCON_ENABLE_HDMI_LINK;
@@ -2869,8 +2866,8 @@ void drm_dp_pcon_hdmi_frl_link_error_count(struct drm_dp_aux *aux,
num_error = 0;
}
- DRM_ERROR("%s: More than %d errors since the last read for lane %d",
- aux->name, num_error, i);
+ drm_err(aux->drm_dev, "%s: More than %d errors since the last read for lane %d",
+ aux->name, num_error, i);
}
}
EXPORT_SYMBOL(drm_dp_pcon_hdmi_frl_link_error_count);
--
2.30.2
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply related [flat|nested] 32+ messages in thread* Re: [Nouveau] [PATCH v2 17/20] drm/dp: Convert drm_dp_helper.c to using drm_err/drm_dbg_*()
2021-03-26 20:38 ` [Nouveau] [PATCH v2 17/20] drm/dp: Convert drm_dp_helper.c to using drm_err/drm_dbg_*() Lyude Paul
@ 2021-03-30 11:04 ` Robert Foss
0 siblings, 0 replies; 32+ messages in thread
From: Robert Foss @ 2021-03-30 11:04 UTC (permalink / raw)
To: Lyude Paul
Cc: dri-devel, David Airlie, nouveau, intel-gfx, Maarten Lankhorst,
open list, Maxime Ripard, amd-gfx, Daniel Vetter
Hey Lyude,
Looks good to me.
Reviewed-by: Robert Foss <robert.foss@linaro.org>
On Fri, 26 Mar 2021 at 21:40, Lyude Paul <lyude@redhat.com> wrote:
>
> Now that we've added a back-pointer to drm_device to drm_dp_aux, made
> drm_dp_aux available to any functions in drm_dp_helper.c which need to
> print to the kernel log, and ensured all of our logging uses a consistent
> format, let's do the final step of the conversion and actually move
> everything over to using drm_err() and drm_dbg_*().
>
> This was done by using the following cocci script:
>
> @@
> expression list expr;
> @@
>
> (
> - DRM_DEBUG_KMS(expr);
> + drm_dbg_kms(aux->drm_dev, expr);
> |
> - DRM_DEBUG_DP(expr);
> + drm_dbg_dp(aux->drm_dev, expr);
> |
> - DRM_DEBUG_ATOMIC(expr);
> + drm_dbg_atomic(aux->drm_dev, expr);
> |
> - DRM_DEBUG_KMS_RATELIMITED(expr);
> + drm_dbg_kms_ratelimited(aux->drm_dev, expr);
> |
> - DRM_ERROR(expr);
> + drm_err(aux->drm_dev, expr);
> )
>
> Followed by correcting the resulting line-wrapping in the results by hand.
>
> v2:
> * Fix indenting in drm_dp_dump_access
>
> Signed-off-by: Lyude Paul <lyude@redhat.com>
> Cc: Robert Foss <robert.foss@linaro.org>
> ---
> drivers/gpu/drm/drm_dp_helper.c | 121 ++++++++++++++++----------------
> 1 file changed, 59 insertions(+), 62 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c
> index 54e19d7b9c51..4940db0bcaae 100644
> --- a/drivers/gpu/drm/drm_dp_helper.c
> +++ b/drivers/gpu/drm/drm_dp_helper.c
> @@ -139,8 +139,8 @@ void drm_dp_link_train_clock_recovery_delay(const struct drm_dp_aux *aux,
> DP_TRAINING_AUX_RD_MASK;
>
> if (rd_interval > 4)
> - DRM_DEBUG_KMS("%s: AUX interval %lu, out of range (max 4)\n",
> - aux->name, rd_interval);
> + drm_dbg_kms(aux->drm_dev, "%s: AUX interval %lu, out of range (max 4)\n",
> + aux->name, rd_interval);
>
> if (rd_interval == 0 || dpcd[DP_DPCD_REV] >= DP_DPCD_REV_14)
> rd_interval = 100;
> @@ -155,8 +155,8 @@ static void __drm_dp_link_train_channel_eq_delay(const struct drm_dp_aux *aux,
> unsigned long rd_interval)
> {
> if (rd_interval > 4)
> - DRM_DEBUG_KMS("%s: AUX interval %lu, out of range (max 4)\n",
> - aux->name, rd_interval);
> + drm_dbg_kms(aux->drm_dev, "%s: AUX interval %lu, out of range (max 4)\n",
> + aux->name, rd_interval);
>
> if (rd_interval == 0)
> rd_interval = 400;
> @@ -220,11 +220,11 @@ drm_dp_dump_access(const struct drm_dp_aux *aux,
> const char *arrow = request == DP_AUX_NATIVE_READ ? "->" : "<-";
>
> if (ret > 0)
> - DRM_DEBUG_DP("%s: 0x%05x AUX %s (ret=%3d) %*ph\n",
> - aux->name, offset, arrow, ret, min(ret, 20), buffer);
> + drm_dbg_dp(aux->drm_dev, "%s: 0x%05x AUX %s (ret=%3d) %*ph\n",
> + aux->name, offset, arrow, ret, min(ret, 20), buffer);
> else
> - DRM_DEBUG_DP("%s: 0x%05x AUX %s (ret=%3d)\n",
> - aux->name, offset, arrow, ret);
> + drm_dbg_dp(aux->drm_dev, "%s: 0x%05x AUX %s (ret=%3d)\n",
> + aux->name, offset, arrow, ret);
> }
>
> /**
> @@ -287,8 +287,8 @@ static int drm_dp_dpcd_access(struct drm_dp_aux *aux, u8 request,
> err = ret;
> }
>
> - DRM_DEBUG_KMS("%s: Too many retries, giving up. First error: %d\n",
> - aux->name, err);
> + drm_dbg_kms(aux->drm_dev, "%s: Too many retries, giving up. First error: %d\n",
> + aux->name, err);
> ret = err;
>
> unlock:
> @@ -524,44 +524,44 @@ bool drm_dp_send_real_edid_checksum(struct drm_dp_aux *aux,
>
> if (drm_dp_dpcd_read(aux, DP_DEVICE_SERVICE_IRQ_VECTOR,
> &auto_test_req, 1) < 1) {
> - DRM_ERROR("%s: DPCD failed read at register 0x%x\n",
> - aux->name, DP_DEVICE_SERVICE_IRQ_VECTOR);
> + drm_err(aux->drm_dev, "%s: DPCD failed read at register 0x%x\n",
> + aux->name, DP_DEVICE_SERVICE_IRQ_VECTOR);
> return false;
> }
> auto_test_req &= DP_AUTOMATED_TEST_REQUEST;
>
> if (drm_dp_dpcd_read(aux, DP_TEST_REQUEST, &link_edid_read, 1) < 1) {
> - DRM_ERROR("%s: DPCD failed read at register 0x%x\n",
> - aux->name, DP_TEST_REQUEST);
> + drm_err(aux->drm_dev, "%s: DPCD failed read at register 0x%x\n",
> + aux->name, DP_TEST_REQUEST);
> return false;
> }
> link_edid_read &= DP_TEST_LINK_EDID_READ;
>
> if (!auto_test_req || !link_edid_read) {
> - DRM_DEBUG_KMS("%s: Source DUT does not support TEST_EDID_READ\n",
> - aux->name);
> + drm_dbg_kms(aux->drm_dev, "%s: Source DUT does not support TEST_EDID_READ\n",
> + aux->name);
> return false;
> }
>
> if (drm_dp_dpcd_write(aux, DP_DEVICE_SERVICE_IRQ_VECTOR,
> &auto_test_req, 1) < 1) {
> - DRM_ERROR("%s: DPCD failed write at register 0x%x\n",
> - aux->name, DP_DEVICE_SERVICE_IRQ_VECTOR);
> + drm_err(aux->drm_dev, "%s: DPCD failed write at register 0x%x\n",
> + aux->name, DP_DEVICE_SERVICE_IRQ_VECTOR);
> return false;
> }
>
> /* send back checksum for the last edid extension block data */
> if (drm_dp_dpcd_write(aux, DP_TEST_EDID_CHECKSUM,
> &real_edid_checksum, 1) < 1) {
> - DRM_ERROR("%s: DPCD failed write at register 0x%x\n",
> - aux->name, DP_TEST_EDID_CHECKSUM);
> + drm_err(aux->drm_dev, "%s: DPCD failed write at register 0x%x\n",
> + aux->name, DP_TEST_EDID_CHECKSUM);
> return false;
> }
>
> test_resp |= DP_TEST_EDID_CHECKSUM_WRITE;
> if (drm_dp_dpcd_write(aux, DP_TEST_RESPONSE, &test_resp, 1) < 1) {
> - DRM_ERROR("%s: DPCD failed write at register 0x%x\n",
> - aux->name, DP_TEST_RESPONSE);
> + drm_err(aux->drm_dev, "%s: DPCD failed write at register 0x%x\n",
> + aux->name, DP_TEST_RESPONSE);
> return false;
> }
>
> @@ -604,17 +604,16 @@ static int drm_dp_read_extended_dpcd_caps(struct drm_dp_aux *aux,
> return -EIO;
>
> if (dpcd[DP_DPCD_REV] > dpcd_ext[DP_DPCD_REV]) {
> - DRM_DEBUG_KMS("%s: Extended DPCD rev less than base DPCD rev (%d > %d)\n",
> - aux->name, dpcd[DP_DPCD_REV],
> - dpcd_ext[DP_DPCD_REV]);
> + drm_dbg_kms(aux->drm_dev,
> + "%s: Extended DPCD rev less than base DPCD rev (%d > %d)\n",
> + aux->name, dpcd[DP_DPCD_REV], dpcd_ext[DP_DPCD_REV]);
> return 0;
> }
>
> if (!memcmp(dpcd, dpcd_ext, sizeof(dpcd_ext)))
> return 0;
>
> - DRM_DEBUG_KMS("%s: Base DPCD: %*ph\n",
> - aux->name, DP_RECEIVER_CAP_SIZE, dpcd);
> + drm_dbg_kms(aux->drm_dev, "%s: Base DPCD: %*ph\n", aux->name, DP_RECEIVER_CAP_SIZE, dpcd);
>
> memcpy(dpcd, dpcd_ext, sizeof(dpcd_ext));
>
> @@ -649,8 +648,7 @@ int drm_dp_read_dpcd_caps(struct drm_dp_aux *aux,
> if (ret < 0)
> return ret;
>
> - DRM_DEBUG_KMS("%s: DPCD: %*ph\n",
> - aux->name, DP_RECEIVER_CAP_SIZE, dpcd);
> + drm_dbg_kms(aux->drm_dev, "%s: DPCD: %*ph\n", aux->name, DP_RECEIVER_CAP_SIZE, dpcd);
>
> return ret;
> }
> @@ -694,8 +692,7 @@ int drm_dp_read_downstream_info(struct drm_dp_aux *aux,
> if (ret != len)
> return -EIO;
>
> - DRM_DEBUG_KMS("%s: DPCD DFP: %*ph\n",
> - aux->name, len, downstream_ports);
> + drm_dbg_kms(aux->drm_dev, "%s: DPCD DFP: %*ph\n", aux->name, len, downstream_ports);
>
> return 0;
> }
> @@ -1412,11 +1409,11 @@ static int drm_dp_i2c_do_msg(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg)
> * Avoid spamming the kernel log with timeout errors.
> */
> if (ret == -ETIMEDOUT)
> - DRM_DEBUG_KMS_RATELIMITED("%s: transaction timed out\n",
> - aux->name);
> + drm_dbg_kms_ratelimited(aux->drm_dev, "%s: transaction timed out\n",
> + aux->name);
> else
> - DRM_DEBUG_KMS("%s: transaction failed: %d\n",
> - aux->name, ret);
> + drm_dbg_kms(aux->drm_dev, "%s: transaction failed: %d\n",
> + aux->name, ret);
> return ret;
> }
>
> @@ -1430,12 +1427,12 @@ static int drm_dp_i2c_do_msg(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg)
> break;
>
> case DP_AUX_NATIVE_REPLY_NACK:
> - DRM_DEBUG_KMS("%s: native nack (result=%d, size=%zu)\n",
> - aux->name, ret, msg->size);
> + drm_dbg_kms(aux->drm_dev, "%s: native nack (result=%d, size=%zu)\n",
> + aux->name, ret, msg->size);
> return -EREMOTEIO;
>
> case DP_AUX_NATIVE_REPLY_DEFER:
> - DRM_DEBUG_KMS("%s: native defer\n", aux->name);
> + drm_dbg_kms(aux->drm_dev, "%s: native defer\n", aux->name);
> /*
> * We could check for I2C bit rate capabilities and if
> * available adjust this interval. We could also be
> @@ -1449,8 +1446,8 @@ static int drm_dp_i2c_do_msg(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg)
> continue;
>
> default:
> - DRM_ERROR("%s: invalid native reply %#04x\n",
> - aux->name, msg->reply);
> + drm_err(aux->drm_dev, "%s: invalid native reply %#04x\n",
> + aux->name, msg->reply);
> return -EREMOTEIO;
> }
>
> @@ -1465,13 +1462,13 @@ static int drm_dp_i2c_do_msg(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg)
> return ret;
>
> case DP_AUX_I2C_REPLY_NACK:
> - DRM_DEBUG_KMS("%s: I2C nack (result=%d, size=%zu)\n",
> - aux->name, ret, msg->size);
> + drm_dbg_kms(aux->drm_dev, "%s: I2C nack (result=%d, size=%zu)\n",
> + aux->name, ret, msg->size);
> aux->i2c_nack_count++;
> return -EREMOTEIO;
>
> case DP_AUX_I2C_REPLY_DEFER:
> - DRM_DEBUG_KMS("%s: I2C defer\n", aux->name);
> + drm_dbg_kms(aux->drm_dev, "%s: I2C defer\n", aux->name);
> /* DP Compliance Test 4.2.2.5 Requirement:
> * Must have at least 7 retries for I2C defers on the
> * transaction to pass this test
> @@ -1485,13 +1482,13 @@ static int drm_dp_i2c_do_msg(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg)
> continue;
>
> default:
> - DRM_ERROR("%s: invalid I2C reply %#04x\n",
> - aux->name, msg->reply);
> + drm_err(aux->drm_dev, "%s: invalid I2C reply %#04x\n",
> + aux->name, msg->reply);
> return -EREMOTEIO;
> }
> }
>
> - DRM_DEBUG_KMS("%s: Too many retries, giving up\n", aux->name);
> + drm_dbg_kms(aux->drm_dev, "%s: Too many retries, giving up\n", aux->name);
> return -EREMOTEIO;
> }
>
> @@ -1520,8 +1517,9 @@ static int drm_dp_i2c_drain_msg(struct drm_dp_aux *aux, struct drm_dp_aux_msg *o
> return err == 0 ? -EPROTO : err;
>
> if (err < msg.size && err < ret) {
> - DRM_DEBUG_KMS("%s: Partial I2C reply: requested %zu bytes got %d bytes\n",
> - aux->name, msg.size, err);
> + drm_dbg_kms(aux->drm_dev,
> + "%s: Partial I2C reply: requested %zu bytes got %d bytes\n",
> + aux->name, msg.size, err);
> ret = err;
> }
>
> @@ -1700,12 +1698,11 @@ static void drm_dp_aux_crc_work(struct work_struct *work)
> }
>
> if (ret == -EAGAIN) {
> - DRM_DEBUG_KMS("%s: Get CRC failed after retrying: %d\n",
> - aux->name, ret);
> + drm_dbg_kms(aux->drm_dev, "%s: Get CRC failed after retrying: %d\n",
> + aux->name, ret);
> continue;
> } else if (ret) {
> - DRM_DEBUG_KMS("%s: Failed to get a CRC: %d\n",
> - aux->name, ret);
> + drm_dbg_kms(aux->drm_dev, "%s: Failed to get a CRC: %d\n", aux->name, ret);
> continue;
> }
>
> @@ -2006,13 +2003,12 @@ int drm_dp_read_desc(struct drm_dp_aux *aux, struct drm_dp_desc *desc,
>
> dev_id_len = strnlen(ident->device_id, sizeof(ident->device_id));
>
> - DRM_DEBUG_KMS("%s: DP %s: OUI %*phD dev-ID %*pE HW-rev %d.%d SW-rev %d.%d quirks 0x%04x\n",
> - aux->name, is_branch ? "branch" : "sink",
> - (int)sizeof(ident->oui), ident->oui,
> - dev_id_len, ident->device_id,
> - ident->hw_rev >> 4, ident->hw_rev & 0xf,
> - ident->sw_major_rev, ident->sw_minor_rev,
> - desc->quirks);
> + drm_dbg_kms(aux->drm_dev,
> + "%s: DP %s: OUI %*phD dev-ID %*pE HW-rev %d.%d SW-rev %d.%d quirks 0x%04x\n",
> + aux->name, is_branch ? "branch" : "sink",
> + (int)sizeof(ident->oui), ident->oui, dev_id_len,
> + ident->device_id, ident->hw_rev >> 4, ident->hw_rev & 0xf,
> + ident->sw_major_rev, ident->sw_minor_rev, desc->quirks);
>
> return 0;
> }
> @@ -2774,7 +2770,8 @@ int drm_dp_pcon_frl_enable(struct drm_dp_aux *aux)
> if (ret < 0)
> return ret;
> if (!(buf & DP_PCON_ENABLE_SOURCE_CTL_MODE)) {
> - DRM_DEBUG_KMS("%s: PCON in Autonomous mode, can't enable FRL\n", aux->name);
> + drm_dbg_kms(aux->drm_dev, "%s: PCON in Autonomous mode, can't enable FRL\n",
> + aux->name);
> return -EINVAL;
> }
> buf |= DP_PCON_ENABLE_HDMI_LINK;
> @@ -2869,8 +2866,8 @@ void drm_dp_pcon_hdmi_frl_link_error_count(struct drm_dp_aux *aux,
> num_error = 0;
> }
>
> - DRM_ERROR("%s: More than %d errors since the last read for lane %d",
> - aux->name, num_error, i);
> + drm_err(aux->drm_dev, "%s: More than %d errors since the last read for lane %d",
> + aux->name, num_error, i);
> }
> }
> EXPORT_SYMBOL(drm_dp_pcon_hdmi_frl_link_error_count);
> --
> 2.30.2
>
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply [flat|nested] 32+ messages in thread
* [Nouveau] [PATCH v2 18/20] drm/dp_dual_mode: Convert drm_dp_dual_mode_helper.c to using drm_err/drm_dbg_kms()
2021-03-26 20:37 [Nouveau] [PATCH v2 00/20] drm: Use new DRM printk funcs (like drm_dbg_*()) in DP helpers Lyude Paul
` (16 preceding siblings ...)
2021-03-26 20:38 ` [Nouveau] [PATCH v2 17/20] drm/dp: Convert drm_dp_helper.c to using drm_err/drm_dbg_*() Lyude Paul
@ 2021-03-26 20:38 ` Lyude Paul
2021-03-26 20:38 ` [Nouveau] [PATCH v2 19/20] drm/dp_mst: Drop DRM_ERROR() on kzalloc() fail in drm_dp_mst_handle_up_req() Lyude Paul
` (2 subsequent siblings)
20 siblings, 0 replies; 32+ messages in thread
From: Lyude Paul @ 2021-03-26 20:38 UTC (permalink / raw)
To: nouveau, dri-devel, amd-gfx, intel-gfx
Cc: David Airlie, Maarten Lankhorst, open list, Maxime Ripard, Daniel Vetter
Next step in the conversion, move everything in drm_dp_dual_mode_helper.c
over to using drm_err() and drm_dbg_kms(). This was done using the
following cocci script:
@@
expression list expr;
@@
(
- DRM_DEBUG_KMS(expr);
+ drm_dbg_kms(dev, expr);
|
- DRM_ERROR(expr);
+ drm_err(dev, expr);
)
And correcting the indentation of the resulting code by hand.
Signed-off-by: Lyude Paul <lyude@redhat.com>
---
drivers/gpu/drm/drm_dp_dual_mode_helper.c | 45 +++++++++++------------
1 file changed, 21 insertions(+), 24 deletions(-)
diff --git a/drivers/gpu/drm/drm_dp_dual_mode_helper.c b/drivers/gpu/drm/drm_dp_dual_mode_helper.c
index dbf9b1fdec63..9faf49354cab 100644
--- a/drivers/gpu/drm/drm_dp_dual_mode_helper.c
+++ b/drivers/gpu/drm/drm_dp_dual_mode_helper.c
@@ -27,6 +27,7 @@
#include <linux/slab.h>
#include <linux/string.h>
+#include <drm/drm_device.h>
#include <drm/drm_dp_dual_mode_helper.h>
#include <drm/drm_print.h>
@@ -202,8 +203,8 @@ enum drm_dp_dual_mode_type drm_dp_dual_mode_detect(const struct drm_device *dev,
*/
ret = drm_dp_dual_mode_read(adapter, DP_DUAL_MODE_HDMI_ID,
hdmi_id, sizeof(hdmi_id));
- DRM_DEBUG_KMS("DP dual mode HDMI ID: %*pE (err %zd)\n",
- ret ? 0 : (int)sizeof(hdmi_id), hdmi_id, ret);
+ drm_dbg_kms(dev, "DP dual mode HDMI ID: %*pE (err %zd)\n",
+ ret ? 0 : (int)sizeof(hdmi_id), hdmi_id, ret);
if (ret)
return DRM_DP_DUAL_MODE_UNKNOWN;
@@ -221,8 +222,7 @@ enum drm_dp_dual_mode_type drm_dp_dual_mode_detect(const struct drm_device *dev,
*/
ret = drm_dp_dual_mode_read(adapter, DP_DUAL_MODE_ADAPTOR_ID,
&adaptor_id, sizeof(adaptor_id));
- DRM_DEBUG_KMS("DP dual mode adaptor ID: %02x (err %zd)\n",
- adaptor_id, ret);
+ drm_dbg_kms(dev, "DP dual mode adaptor ID: %02x (err %zd)\n", adaptor_id, ret);
if (ret == 0) {
if (is_lspcon_adaptor(hdmi_id, adaptor_id))
return DRM_DP_DUAL_MODE_LSPCON;
@@ -238,8 +238,7 @@ enum drm_dp_dual_mode_type drm_dp_dual_mode_detect(const struct drm_device *dev,
* that we may have misdetected the type.
*/
if (!is_type1_adaptor(adaptor_id) && adaptor_id != hdmi_id[0])
- DRM_ERROR("Unexpected DP dual mode adaptor ID %02x\n",
- adaptor_id);
+ drm_err(dev, "Unexpected DP dual mode adaptor ID %02x\n", adaptor_id);
}
@@ -286,7 +285,7 @@ int drm_dp_dual_mode_max_tmds_clock(const struct drm_device *dev, enum drm_dp_du
ret = drm_dp_dual_mode_read(adapter, DP_DUAL_MODE_MAX_TMDS_CLOCK,
&max_tmds_clock, sizeof(max_tmds_clock));
if (ret || max_tmds_clock == 0x00 || max_tmds_clock == 0xff) {
- DRM_DEBUG_KMS("Failed to query max TMDS clock\n");
+ drm_dbg_kms(dev, "Failed to query max TMDS clock\n");
return 165000;
}
@@ -326,7 +325,7 @@ int drm_dp_dual_mode_get_tmds_output(const struct drm_device *dev,
ret = drm_dp_dual_mode_read(adapter, DP_DUAL_MODE_TMDS_OEN,
&tmds_oen, sizeof(tmds_oen));
if (ret) {
- DRM_DEBUG_KMS("Failed to query state of TMDS output buffers\n");
+ drm_dbg_kms(dev, "Failed to query state of TMDS output buffers\n");
return ret;
}
@@ -372,18 +371,17 @@ int drm_dp_dual_mode_set_tmds_output(const struct drm_device *dev, enum drm_dp_d
ret = drm_dp_dual_mode_write(adapter, DP_DUAL_MODE_TMDS_OEN,
&tmds_oen, sizeof(tmds_oen));
if (ret) {
- DRM_DEBUG_KMS("Failed to %s TMDS output buffers (%d attempts)\n",
- enable ? "enable" : "disable",
- retry + 1);
+ drm_dbg_kms(dev, "Failed to %s TMDS output buffers (%d attempts)\n",
+ enable ? "enable" : "disable", retry + 1);
return ret;
}
ret = drm_dp_dual_mode_read(adapter, DP_DUAL_MODE_TMDS_OEN,
&tmp, sizeof(tmp));
if (ret) {
- DRM_DEBUG_KMS("I2C read failed during TMDS output buffer %s (%d attempts)\n",
- enable ? "enabling" : "disabling",
- retry + 1);
+ drm_dbg_kms(dev,
+ "I2C read failed during TMDS output buffer %s (%d attempts)\n",
+ enable ? "enabling" : "disabling", retry + 1);
return ret;
}
@@ -391,8 +389,8 @@ int drm_dp_dual_mode_set_tmds_output(const struct drm_device *dev, enum drm_dp_d
return 0;
}
- DRM_DEBUG_KMS("I2C write value mismatch during TMDS output buffer %s\n",
- enable ? "enabling" : "disabling");
+ drm_dbg_kms(dev, "I2C write value mismatch during TMDS output buffer %s\n",
+ enable ? "enabling" : "disabling");
return -EIO;
}
@@ -446,7 +444,7 @@ int drm_lspcon_get_mode(const struct drm_device *dev, struct i2c_adapter *adapte
int retry;
if (!mode) {
- DRM_ERROR("NULL input\n");
+ drm_err(dev, "NULL input\n");
return -EINVAL;
}
@@ -463,7 +461,7 @@ int drm_lspcon_get_mode(const struct drm_device *dev, struct i2c_adapter *adapte
}
if (ret < 0) {
- DRM_DEBUG_KMS("LSPCON read(0x80, 0x41) failed\n");
+ drm_dbg_kms(dev, "LSPCON read(0x80, 0x41) failed\n");
return -EFAULT;
}
@@ -500,7 +498,7 @@ int drm_lspcon_set_mode(const struct drm_device *dev, struct i2c_adapter *adapte
ret = drm_dp_dual_mode_write(adapter, DP_DUAL_MODE_LSPCON_MODE_CHANGE,
&data, sizeof(data));
if (ret < 0) {
- DRM_ERROR("LSPCON mode change failed\n");
+ drm_err(dev, "LSPCON mode change failed\n");
return ret;
}
@@ -512,22 +510,21 @@ int drm_lspcon_set_mode(const struct drm_device *dev, struct i2c_adapter *adapte
do {
ret = drm_lspcon_get_mode(dev, adapter, ¤t_mode);
if (ret) {
- DRM_ERROR("can't confirm LSPCON mode change\n");
+ drm_err(dev, "can't confirm LSPCON mode change\n");
return ret;
} else {
if (current_mode != mode) {
msleep(10);
time_out -= 10;
} else {
- DRM_DEBUG_KMS("LSPCON mode changed to %s\n",
- mode == DRM_LSPCON_MODE_LS ?
- "LS" : "PCON");
+ drm_dbg_kms(dev, "LSPCON mode changed to %s\n",
+ mode == DRM_LSPCON_MODE_LS ? "LS" : "PCON");
return 0;
}
}
} while (time_out);
- DRM_ERROR("LSPCON mode change timed out\n");
+ drm_err(dev, "LSPCON mode change timed out\n");
return -ETIMEDOUT;
}
EXPORT_SYMBOL(drm_lspcon_set_mode);
--
2.30.2
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply related [flat|nested] 32+ messages in thread* [Nouveau] [PATCH v2 19/20] drm/dp_mst: Drop DRM_ERROR() on kzalloc() fail in drm_dp_mst_handle_up_req()
2021-03-26 20:37 [Nouveau] [PATCH v2 00/20] drm: Use new DRM printk funcs (like drm_dbg_*()) in DP helpers Lyude Paul
` (17 preceding siblings ...)
2021-03-26 20:38 ` [Nouveau] [PATCH v2 18/20] drm/dp_dual_mode: Convert drm_dp_dual_mode_helper.c to using drm_err/drm_dbg_kms() Lyude Paul
@ 2021-03-26 20:38 ` Lyude Paul
2021-03-30 11:06 ` Robert Foss
2021-03-26 20:38 ` [Nouveau] [PATCH v2 20/20] drm/dp_mst: Convert drm_dp_mst_topology.c to drm_err()/drm_dbg*() Lyude Paul
2021-04-01 13:40 ` [Nouveau] [Intel-gfx] [PATCH v2 00/20] drm: Use new DRM printk funcs (like drm_dbg_*()) in DP helpers Jani Nikula
20 siblings, 1 reply; 32+ messages in thread
From: Lyude Paul @ 2021-03-26 20:38 UTC (permalink / raw)
To: nouveau, dri-devel, amd-gfx, intel-gfx
Cc: Daniel Vetter, David Airlie, Maarten Lankhorst, open list,
Maxime Ripard, Robert Foss
Checkpatch was complaining about this - there's no need for us to print
errors when kzalloc() fails, as kzalloc() will already WARN for us. So,
let's fix that before converting things to make checkpatch happy.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Robert Foss <robert.foss@linaro.org>
---
drivers/gpu/drm/drm_dp_mst_topology.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c
index ec2285595c33..74c420f5f204 100644
--- a/drivers/gpu/drm/drm_dp_mst_topology.c
+++ b/drivers/gpu/drm/drm_dp_mst_topology.c
@@ -4113,10 +4113,9 @@ static int drm_dp_mst_handle_up_req(struct drm_dp_mst_topology_mgr *mgr)
return 0;
up_req = kzalloc(sizeof(*up_req), GFP_KERNEL);
- if (!up_req) {
- DRM_ERROR("Not enough memory to process MST up req\n");
+ if (!up_req)
return -ENOMEM;
- }
+
INIT_LIST_HEAD(&up_req->next);
drm_dp_sideband_parse_req(&mgr->up_req_recv, &up_req->msg);
--
2.30.2
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply related [flat|nested] 32+ messages in thread* Re: [Nouveau] [PATCH v2 19/20] drm/dp_mst: Drop DRM_ERROR() on kzalloc() fail in drm_dp_mst_handle_up_req()
2021-03-26 20:38 ` [Nouveau] [PATCH v2 19/20] drm/dp_mst: Drop DRM_ERROR() on kzalloc() fail in drm_dp_mst_handle_up_req() Lyude Paul
@ 2021-03-30 11:06 ` Robert Foss
0 siblings, 0 replies; 32+ messages in thread
From: Robert Foss @ 2021-03-30 11:06 UTC (permalink / raw)
To: Lyude Paul
Cc: dri-devel, David Airlie, nouveau, intel-gfx, Maarten Lankhorst,
open list, Maxime Ripard, amd-gfx, Daniel Vetter
Hey Lyude,
This patch looks good to me.
Reviewed-by: Robert Foss <robert.foss@linaro.org>
On Fri, 26 Mar 2021 at 21:40, Lyude Paul <lyude@redhat.com> wrote:
>
> Checkpatch was complaining about this - there's no need for us to print
> errors when kzalloc() fails, as kzalloc() will already WARN for us. So,
> let's fix that before converting things to make checkpatch happy.
>
> Signed-off-by: Lyude Paul <lyude@redhat.com>
> Cc: Robert Foss <robert.foss@linaro.org>
> ---
> drivers/gpu/drm/drm_dp_mst_topology.c | 5 ++---
> 1 file changed, 2 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c
> index ec2285595c33..74c420f5f204 100644
> --- a/drivers/gpu/drm/drm_dp_mst_topology.c
> +++ b/drivers/gpu/drm/drm_dp_mst_topology.c
> @@ -4113,10 +4113,9 @@ static int drm_dp_mst_handle_up_req(struct drm_dp_mst_topology_mgr *mgr)
> return 0;
>
> up_req = kzalloc(sizeof(*up_req), GFP_KERNEL);
> - if (!up_req) {
> - DRM_ERROR("Not enough memory to process MST up req\n");
> + if (!up_req)
> return -ENOMEM;
> - }
> +
> INIT_LIST_HEAD(&up_req->next);
>
> drm_dp_sideband_parse_req(&mgr->up_req_recv, &up_req->msg);
> --
> 2.30.2
>
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply [flat|nested] 32+ messages in thread
* [Nouveau] [PATCH v2 20/20] drm/dp_mst: Convert drm_dp_mst_topology.c to drm_err()/drm_dbg*()
2021-03-26 20:37 [Nouveau] [PATCH v2 00/20] drm: Use new DRM printk funcs (like drm_dbg_*()) in DP helpers Lyude Paul
` (18 preceding siblings ...)
2021-03-26 20:38 ` [Nouveau] [PATCH v2 19/20] drm/dp_mst: Drop DRM_ERROR() on kzalloc() fail in drm_dp_mst_handle_up_req() Lyude Paul
@ 2021-03-26 20:38 ` Lyude Paul
2021-03-30 11:19 ` Robert Foss
2021-04-01 13:40 ` [Nouveau] [Intel-gfx] [PATCH v2 00/20] drm: Use new DRM printk funcs (like drm_dbg_*()) in DP helpers Jani Nikula
20 siblings, 1 reply; 32+ messages in thread
From: Lyude Paul @ 2021-03-26 20:38 UTC (permalink / raw)
To: nouveau, dri-devel, amd-gfx, intel-gfx
Cc: Daniel Vetter, David Airlie, Maarten Lankhorst, open list,
Maxime Ripard, Robert Foss
And finally, convert all of the code in drm_dp_mst_topology.c over to using
drm_err() and drm_dbg*(). Note that this refactor would have been a lot
more complicated to have tried writing a coccinelle script for, so this
whole thing was done by hand.
v2:
* Fix line-wrapping in drm_dp_mst_atomic_check_mstb_bw_limit()
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Robert Foss <robert.foss@linaro.org>
---
drivers/gpu/drm/drm_dp_mst_topology.c | 368 +++++++++++++-------------
1 file changed, 187 insertions(+), 181 deletions(-)
diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c
index 74c420f5f204..b8c3a99a4119 100644
--- a/drivers/gpu/drm/drm_dp_mst_topology.c
+++ b/drivers/gpu/drm/drm_dp_mst_topology.c
@@ -286,7 +286,8 @@ static void drm_dp_encode_sideband_msg_hdr(struct drm_dp_sideband_msg_hdr *hdr,
*len = idx;
}
-static bool drm_dp_decode_sideband_msg_hdr(struct drm_dp_sideband_msg_hdr *hdr,
+static bool drm_dp_decode_sideband_msg_hdr(const struct drm_dp_mst_topology_mgr *mgr,
+ struct drm_dp_sideband_msg_hdr *hdr,
u8 *buf, int buflen, u8 *hdrlen)
{
u8 crc4;
@@ -303,7 +304,7 @@ static bool drm_dp_decode_sideband_msg_hdr(struct drm_dp_sideband_msg_hdr *hdr,
crc4 = drm_dp_msg_header_crc4(buf, (len * 2) - 1);
if ((crc4 & 0xf) != (buf[len - 1] & 0xf)) {
- DRM_DEBUG_KMS("crc4 mismatch 0x%x 0x%x\n", crc4, buf[len - 1]);
+ drm_dbg_kms(mgr->dev, "crc4 mismatch 0x%x 0x%x\n", crc4, buf[len - 1]);
return false;
}
@@ -789,7 +790,8 @@ static bool drm_dp_sideband_append_payload(struct drm_dp_sideband_msg_rx *msg,
return true;
}
-static bool drm_dp_sideband_parse_link_address(struct drm_dp_sideband_msg_rx *raw,
+static bool drm_dp_sideband_parse_link_address(const struct drm_dp_mst_topology_mgr *mgr,
+ struct drm_dp_sideband_msg_rx *raw,
struct drm_dp_sideband_msg_reply_body *repmsg)
{
int idx = 1;
@@ -1014,7 +1016,8 @@ drm_dp_sideband_parse_query_stream_enc_status(
return true;
}
-static bool drm_dp_sideband_parse_reply(struct drm_dp_sideband_msg_rx *raw,
+static bool drm_dp_sideband_parse_reply(const struct drm_dp_mst_topology_mgr *mgr,
+ struct drm_dp_sideband_msg_rx *raw,
struct drm_dp_sideband_msg_reply_body *msg)
{
memset(msg, 0, sizeof(*msg));
@@ -1030,7 +1033,7 @@ static bool drm_dp_sideband_parse_reply(struct drm_dp_sideband_msg_rx *raw,
switch (msg->req_type) {
case DP_LINK_ADDRESS:
- return drm_dp_sideband_parse_link_address(raw, msg);
+ return drm_dp_sideband_parse_link_address(mgr, raw, msg);
case DP_QUERY_PAYLOAD:
return drm_dp_sideband_parse_query_payload_ack(raw, msg);
case DP_REMOTE_DPCD_READ:
@@ -1053,14 +1056,16 @@ static bool drm_dp_sideband_parse_reply(struct drm_dp_sideband_msg_rx *raw,
case DP_QUERY_STREAM_ENC_STATUS:
return drm_dp_sideband_parse_query_stream_enc_status(raw, msg);
default:
- DRM_ERROR("Got unknown reply 0x%02x (%s)\n", msg->req_type,
- drm_dp_mst_req_type_str(msg->req_type));
+ drm_err(mgr->dev, "Got unknown reply 0x%02x (%s)\n",
+ msg->req_type, drm_dp_mst_req_type_str(msg->req_type));
return false;
}
}
-static bool drm_dp_sideband_parse_connection_status_notify(struct drm_dp_sideband_msg_rx *raw,
- struct drm_dp_sideband_msg_req_body *msg)
+static bool
+drm_dp_sideband_parse_connection_status_notify(const struct drm_dp_mst_topology_mgr *mgr,
+ struct drm_dp_sideband_msg_rx *raw,
+ struct drm_dp_sideband_msg_req_body *msg)
{
int idx = 1;
@@ -1082,12 +1087,14 @@ static bool drm_dp_sideband_parse_connection_status_notify(struct drm_dp_sideban
idx++;
return true;
fail_len:
- DRM_DEBUG_KMS("connection status reply parse length fail %d %d\n", idx, raw->curlen);
+ drm_dbg_kms(mgr->dev, "connection status reply parse length fail %d %d\n",
+ idx, raw->curlen);
return false;
}
-static bool drm_dp_sideband_parse_resource_status_notify(struct drm_dp_sideband_msg_rx *raw,
- struct drm_dp_sideband_msg_req_body *msg)
+static bool drm_dp_sideband_parse_resource_status_notify(const struct drm_dp_mst_topology_mgr *mgr,
+ struct drm_dp_sideband_msg_rx *raw,
+ struct drm_dp_sideband_msg_req_body *msg)
{
int idx = 1;
@@ -1105,11 +1112,12 @@ static bool drm_dp_sideband_parse_resource_status_notify(struct drm_dp_sideband_
idx++;
return true;
fail_len:
- DRM_DEBUG_KMS("resource status reply parse length fail %d %d\n", idx, raw->curlen);
+ drm_dbg_kms(mgr->dev, "resource status reply parse length fail %d %d\n", idx, raw->curlen);
return false;
}
-static bool drm_dp_sideband_parse_req(struct drm_dp_sideband_msg_rx *raw,
+static bool drm_dp_sideband_parse_req(const struct drm_dp_mst_topology_mgr *mgr,
+ struct drm_dp_sideband_msg_rx *raw,
struct drm_dp_sideband_msg_req_body *msg)
{
memset(msg, 0, sizeof(*msg));
@@ -1117,12 +1125,12 @@ static bool drm_dp_sideband_parse_req(struct drm_dp_sideband_msg_rx *raw,
switch (msg->req_type) {
case DP_CONNECTION_STATUS_NOTIFY:
- return drm_dp_sideband_parse_connection_status_notify(raw, msg);
+ return drm_dp_sideband_parse_connection_status_notify(mgr, raw, msg);
case DP_RESOURCE_STATUS_NOTIFY:
- return drm_dp_sideband_parse_resource_status_notify(raw, msg);
+ return drm_dp_sideband_parse_resource_status_notify(mgr, raw, msg);
default:
- DRM_ERROR("Got unknown request 0x%02x (%s)\n", msg->req_type,
- drm_dp_mst_req_type_str(msg->req_type));
+ drm_err(mgr->dev, "Got unknown request 0x%02x (%s)\n",
+ msg->req_type, drm_dp_mst_req_type_str(msg->req_type));
return false;
}
}
@@ -1232,14 +1240,14 @@ static int drm_dp_mst_assign_payload_id(struct drm_dp_mst_topology_mgr *mgr,
ret = find_first_zero_bit(&mgr->payload_mask, mgr->max_payloads + 1);
if (ret > mgr->max_payloads) {
ret = -EINVAL;
- DRM_DEBUG_KMS("out of payload ids %d\n", ret);
+ drm_dbg_kms(mgr->dev, "out of payload ids %d\n", ret);
goto out_unlock;
}
vcpi_ret = find_first_zero_bit(&mgr->vcpi_mask, mgr->max_payloads + 1);
if (vcpi_ret > mgr->max_payloads) {
ret = -EINVAL;
- DRM_DEBUG_KMS("out of vcpi ids %d\n", ret);
+ drm_dbg_kms(mgr->dev, "out of vcpi ids %d\n", ret);
goto out_unlock;
}
@@ -1261,7 +1269,7 @@ static void drm_dp_mst_put_payload_id(struct drm_dp_mst_topology_mgr *mgr,
return;
mutex_lock(&mgr->payload_lock);
- DRM_DEBUG_KMS("putting payload %d\n", vcpi);
+ drm_dbg_kms(mgr->dev, "putting payload %d\n", vcpi);
clear_bit(vcpi - 1, &mgr->vcpi_mask);
for (i = 0; i < mgr->max_payloads; i++) {
@@ -1331,7 +1339,8 @@ static int drm_dp_mst_wait_tx_reply(struct drm_dp_mst_branch *mstb,
goto out;
}
} else {
- DRM_DEBUG_KMS("timedout msg send %p %d %d\n", txmsg, txmsg->state, txmsg->seqno);
+ drm_dbg_kms(mgr->dev, "timedout msg send %p %d %d\n",
+ txmsg, txmsg->state, txmsg->seqno);
/* dump some state */
ret = -EIO;
@@ -1485,7 +1494,7 @@ static void
drm_dp_mst_get_mstb_malloc(struct drm_dp_mst_branch *mstb)
{
kref_get(&mstb->malloc_kref);
- DRM_DEBUG("mstb %p (%d)\n", mstb, kref_read(&mstb->malloc_kref));
+ drm_dbg(mstb->mgr->dev, "mstb %p (%d)\n", mstb, kref_read(&mstb->malloc_kref));
}
/**
@@ -1502,7 +1511,7 @@ drm_dp_mst_get_mstb_malloc(struct drm_dp_mst_branch *mstb)
static void
drm_dp_mst_put_mstb_malloc(struct drm_dp_mst_branch *mstb)
{
- DRM_DEBUG("mstb %p (%d)\n", mstb, kref_read(&mstb->malloc_kref) - 1);
+ drm_dbg(mstb->mgr->dev, "mstb %p (%d)\n", mstb, kref_read(&mstb->malloc_kref) - 1);
kref_put(&mstb->malloc_kref, drm_dp_free_mst_branch_device);
}
@@ -1536,7 +1545,7 @@ void
drm_dp_mst_get_port_malloc(struct drm_dp_mst_port *port)
{
kref_get(&port->malloc_kref);
- DRM_DEBUG("port %p (%d)\n", port, kref_read(&port->malloc_kref));
+ drm_dbg(port->mgr->dev, "port %p (%d)\n", port, kref_read(&port->malloc_kref));
}
EXPORT_SYMBOL(drm_dp_mst_get_port_malloc);
@@ -1553,7 +1562,7 @@ EXPORT_SYMBOL(drm_dp_mst_get_port_malloc);
void
drm_dp_mst_put_port_malloc(struct drm_dp_mst_port *port)
{
- DRM_DEBUG("port %p (%d)\n", port, kref_read(&port->malloc_kref) - 1);
+ drm_dbg(port->mgr->dev, "port %p (%d)\n", port, kref_read(&port->malloc_kref) - 1);
kref_put(&port->malloc_kref, drm_dp_free_mst_port);
}
EXPORT_SYMBOL(drm_dp_mst_put_port_malloc);
@@ -1778,8 +1787,7 @@ drm_dp_mst_topology_try_get_mstb(struct drm_dp_mst_branch *mstb)
topology_ref_history_lock(mstb->mgr);
ret = kref_get_unless_zero(&mstb->topology_kref);
if (ret) {
- DRM_DEBUG("mstb %p (%d)\n",
- mstb, kref_read(&mstb->topology_kref));
+ drm_dbg(mstb->mgr->dev, "mstb %p (%d)\n", mstb, kref_read(&mstb->topology_kref));
save_mstb_topology_ref(mstb, DRM_DP_MST_TOPOLOGY_REF_GET);
}
@@ -1809,7 +1817,7 @@ static void drm_dp_mst_topology_get_mstb(struct drm_dp_mst_branch *mstb)
save_mstb_topology_ref(mstb, DRM_DP_MST_TOPOLOGY_REF_GET);
WARN_ON(kref_read(&mstb->topology_kref) == 0);
kref_get(&mstb->topology_kref);
- DRM_DEBUG("mstb %p (%d)\n", mstb, kref_read(&mstb->topology_kref));
+ drm_dbg(mstb->mgr->dev, "mstb %p (%d)\n", mstb, kref_read(&mstb->topology_kref));
topology_ref_history_unlock(mstb->mgr);
}
@@ -1831,8 +1839,7 @@ drm_dp_mst_topology_put_mstb(struct drm_dp_mst_branch *mstb)
{
topology_ref_history_lock(mstb->mgr);
- DRM_DEBUG("mstb %p (%d)\n",
- mstb, kref_read(&mstb->topology_kref) - 1);
+ drm_dbg(mstb->mgr->dev, "mstb %p (%d)\n", mstb, kref_read(&mstb->topology_kref) - 1);
save_mstb_topology_ref(mstb, DRM_DP_MST_TOPOLOGY_REF_PUT);
topology_ref_history_unlock(mstb->mgr);
@@ -1895,8 +1902,7 @@ drm_dp_mst_topology_try_get_port(struct drm_dp_mst_port *port)
topology_ref_history_lock(port->mgr);
ret = kref_get_unless_zero(&port->topology_kref);
if (ret) {
- DRM_DEBUG("port %p (%d)\n",
- port, kref_read(&port->topology_kref));
+ drm_dbg(port->mgr->dev, "port %p (%d)\n", port, kref_read(&port->topology_kref));
save_port_topology_ref(port, DRM_DP_MST_TOPOLOGY_REF_GET);
}
@@ -1923,7 +1929,7 @@ static void drm_dp_mst_topology_get_port(struct drm_dp_mst_port *port)
WARN_ON(kref_read(&port->topology_kref) == 0);
kref_get(&port->topology_kref);
- DRM_DEBUG("port %p (%d)\n", port, kref_read(&port->topology_kref));
+ drm_dbg(port->mgr->dev, "port %p (%d)\n", port, kref_read(&port->topology_kref));
save_port_topology_ref(port, DRM_DP_MST_TOPOLOGY_REF_GET);
topology_ref_history_unlock(port->mgr);
@@ -1944,8 +1950,7 @@ static void drm_dp_mst_topology_put_port(struct drm_dp_mst_port *port)
{
topology_ref_history_lock(port->mgr);
- DRM_DEBUG("port %p (%d)\n",
- port, kref_read(&port->topology_kref) - 1);
+ drm_dbg(port->mgr->dev, "port %p (%d)\n", port, kref_read(&port->topology_kref) - 1);
save_port_topology_ref(port, DRM_DP_MST_TOPOLOGY_REF_PUT);
topology_ref_history_unlock(port->mgr);
@@ -2130,8 +2135,7 @@ drm_dp_port_set_pdt(struct drm_dp_mst_port *port, u8 new_pdt,
mstb = drm_dp_add_mst_branch_device(lct, rad);
if (!mstb) {
ret = -ENOMEM;
- DRM_ERROR("Failed to create MSTB for port %p",
- port);
+ drm_err(mgr->dev, "Failed to create MSTB for port %p", port);
goto out;
}
@@ -2261,8 +2265,8 @@ static void build_mst_prop_path(const struct drm_dp_mst_branch *mstb,
int drm_dp_mst_connector_late_register(struct drm_connector *connector,
struct drm_dp_mst_port *port)
{
- DRM_DEBUG_KMS("registering %s remote bus for %s\n",
- port->aux.name, connector->kdev->kobj.name);
+ drm_dbg_kms(port->mgr->dev, "registering %s remote bus for %s\n",
+ port->aux.name, connector->kdev->kobj.name);
port->aux.dev = connector->kdev;
return drm_dp_aux_register_devnode(&port->aux);
@@ -2281,8 +2285,8 @@ EXPORT_SYMBOL(drm_dp_mst_connector_late_register);
void drm_dp_mst_connector_early_unregister(struct drm_connector *connector,
struct drm_dp_mst_port *port)
{
- DRM_DEBUG_KMS("unregistering %s remote bus for %s\n",
- port->aux.name, connector->kdev->kobj.name);
+ drm_dbg_kms(port->mgr->dev, "unregistering %s remote bus for %s\n",
+ port->aux.name, connector->kdev->kobj.name);
drm_dp_aux_unregister_devnode(&port->aux);
}
EXPORT_SYMBOL(drm_dp_mst_connector_early_unregister);
@@ -2312,7 +2316,7 @@ drm_dp_mst_port_add_connector(struct drm_dp_mst_branch *mstb,
return;
error:
- DRM_ERROR("Failed to create connector for port %p: %d\n", port, ret);
+ drm_err(mgr->dev, "Failed to create connector for port %p: %d\n", port, ret);
}
/*
@@ -2452,8 +2456,7 @@ drm_dp_mst_handle_link_address_port(struct drm_dp_mst_branch *mstb,
if (ret == 1) {
send_link_addr = true;
} else if (ret < 0) {
- DRM_ERROR("Failed to change PDT on port %p: %d\n",
- port, ret);
+ drm_err(dev, "Failed to change PDT on port %p: %d\n", port, ret);
goto fail;
}
@@ -2548,8 +2551,7 @@ drm_dp_mst_handle_conn_stat(struct drm_dp_mst_branch *mstb,
if (ret == 1) {
dowork = true;
} else if (ret < 0) {
- DRM_ERROR("Failed to change PDT for port %p: %d\n",
- port, ret);
+ drm_err(mgr->dev, "Failed to change PDT for port %p: %d\n", port, ret);
dowork = false;
}
@@ -2608,7 +2610,9 @@ static struct drm_dp_mst_branch *drm_dp_get_mst_branch_device(struct drm_dp_mst_
if (port->port_num == port_num) {
mstb = port->mstb;
if (!mstb) {
- DRM_ERROR("failed to lookup MSTB with lct %d, rad %02x\n", lct, rad[0]);
+ drm_err(mgr->dev,
+ "failed to lookup MSTB with lct %d, rad %02x\n",
+ lct, rad[0]);
goto out;
}
@@ -2744,7 +2748,7 @@ static void drm_dp_mst_link_probe_work(struct work_struct *work)
* things work again.
*/
if (clear_payload_id_table) {
- DRM_DEBUG_KMS("Clearing payload ID table\n");
+ drm_dbg_kms(dev, "Clearing payload ID table\n");
drm_dp_send_clear_payload_id_table(mgr, mstb);
}
@@ -2806,7 +2810,7 @@ static int drm_dp_send_sideband_msg(struct drm_dp_mst_topology_mgr *mgr,
retries++;
goto retry;
}
- DRM_DEBUG_KMS("failed to dpcd write %d %d\n", tosend, ret);
+ drm_dbg_kms(mgr->dev, "failed to dpcd write %d %d\n", tosend, ret);
return -EIO;
}
@@ -2919,7 +2923,7 @@ static void process_single_down_tx_qlock(struct drm_dp_mst_topology_mgr *mgr)
struct drm_dp_sideband_msg_tx, next);
ret = process_single_tx_qlock(mgr, txmsg, false);
if (ret < 0) {
- DRM_DEBUG_KMS("failed to send msg in q %d\n", ret);
+ drm_dbg_kms(mgr->dev, "failed to send msg in q %d\n", ret);
list_del(&txmsg->next);
txmsg->state = DRM_DP_SIDEBAND_TX_TIMEOUT;
wake_up_all(&mgr->tx_waitq);
@@ -2944,24 +2948,26 @@ static void drm_dp_queue_down_tx(struct drm_dp_mst_topology_mgr *mgr,
}
static void
-drm_dp_dump_link_address(struct drm_dp_link_address_ack_reply *reply)
+drm_dp_dump_link_address(const struct drm_dp_mst_topology_mgr *mgr,
+ struct drm_dp_link_address_ack_reply *reply)
{
struct drm_dp_link_addr_reply_port *port_reply;
int i;
for (i = 0; i < reply->nports; i++) {
port_reply = &reply->ports[i];
- DRM_DEBUG_KMS("port %d: input %d, pdt: %d, pn: %d, dpcd_rev: %02x, mcs: %d, ddps: %d, ldps %d, sdp %d/%d\n",
- i,
- port_reply->input_port,
- port_reply->peer_device_type,
- port_reply->port_number,
- port_reply->dpcd_revision,
- port_reply->mcs,
- port_reply->ddps,
- port_reply->legacy_device_plug_status,
- port_reply->num_sdp_streams,
- port_reply->num_sdp_stream_sinks);
+ drm_dbg_kms(mgr->dev,
+ "port %d: input %d, pdt: %d, pn: %d, dpcd_rev: %02x, mcs: %d, ddps: %d, ldps %d, sdp %d/%d\n",
+ i,
+ port_reply->input_port,
+ port_reply->peer_device_type,
+ port_reply->port_number,
+ port_reply->dpcd_revision,
+ port_reply->mcs,
+ port_reply->ddps,
+ port_reply->legacy_device_plug_status,
+ port_reply->num_sdp_streams,
+ port_reply->num_sdp_stream_sinks);
}
}
@@ -2987,26 +2993,25 @@ static int drm_dp_send_link_address(struct drm_dp_mst_topology_mgr *mgr,
/* FIXME: Actually do some real error handling here */
ret = drm_dp_mst_wait_tx_reply(mstb, txmsg);
if (ret <= 0) {
- DRM_ERROR("Sending link address failed with %d\n", ret);
+ drm_err(mgr->dev, "Sending link address failed with %d\n", ret);
goto out;
}
if (txmsg->reply.reply_type == DP_SIDEBAND_REPLY_NAK) {
- DRM_ERROR("link address NAK received\n");
+ drm_err(mgr->dev, "link address NAK received\n");
ret = -EIO;
goto out;
}
reply = &txmsg->reply.u.link_addr;
- DRM_DEBUG_KMS("link address reply: %d\n", reply->nports);
- drm_dp_dump_link_address(reply);
+ drm_dbg_kms(mgr->dev, "link address reply: %d\n", reply->nports);
+ drm_dp_dump_link_address(mgr, reply);
ret = drm_dp_check_mstb_guid(mstb, reply->guid);
if (ret) {
char buf[64];
drm_dp_mst_rad_to_str(mstb->rad, mstb->lct, buf, sizeof(buf));
- DRM_ERROR("GUID check on %s failed: %d\n",
- buf, ret);
+ drm_err(mgr->dev, "GUID check on %s failed: %d\n", buf, ret);
goto out;
}
@@ -3030,8 +3035,8 @@ static int drm_dp_send_link_address(struct drm_dp_mst_topology_mgr *mgr,
if (port_mask & BIT(port->port_num))
continue;
- DRM_DEBUG_KMS("port %d was not in link address, removing\n",
- port->port_num);
+ drm_dbg_kms(mgr->dev, "port %d was not in link address, removing\n",
+ port->port_num);
list_del(&port->next);
drm_dp_mst_topology_put_port(port);
changed = true;
@@ -3063,7 +3068,7 @@ drm_dp_send_clear_payload_id_table(struct drm_dp_mst_topology_mgr *mgr,
ret = drm_dp_mst_wait_tx_reply(mstb, txmsg);
if (ret > 0 && txmsg->reply.reply_type == DP_SIDEBAND_REPLY_NAK)
- DRM_DEBUG_KMS("clear payload table id nak received\n");
+ drm_dbg_kms(mgr->dev, "clear payload table id nak received\n");
kfree(txmsg);
}
@@ -3092,15 +3097,15 @@ drm_dp_send_enum_path_resources(struct drm_dp_mst_topology_mgr *mgr,
path_res = &txmsg->reply.u.path_resources;
if (txmsg->reply.reply_type == DP_SIDEBAND_REPLY_NAK) {
- DRM_DEBUG_KMS("enum path resources nak received\n");
+ drm_dbg_kms(mgr->dev, "enum path resources nak received\n");
} else {
if (port->port_num != path_res->port_number)
DRM_ERROR("got incorrect port in response\n");
- DRM_DEBUG_KMS("enum path resources %d: %d %d\n",
- path_res->port_number,
- path_res->full_payload_bw_number,
- path_res->avail_payload_bw_number);
+ drm_dbg_kms(mgr->dev, "enum path resources %d: %d %d\n",
+ path_res->port_number,
+ path_res->full_payload_bw_number,
+ path_res->avail_payload_bw_number);
/*
* If something changed, make sure we send a
@@ -3346,7 +3351,7 @@ static int drm_dp_destroy_payload_step1(struct drm_dp_mst_topology_mgr *mgr,
int id,
struct drm_dp_payload *payload)
{
- DRM_DEBUG_KMS("\n");
+ drm_dbg_kms(mgr->dev, "\n");
/* it's okay for these to fail */
if (port) {
drm_dp_payload_send_msg(mgr, port, id, 0);
@@ -3452,7 +3457,7 @@ int drm_dp_update_payload_part1(struct drm_dp_mst_topology_mgr *mgr)
continue;
}
- DRM_DEBUG_KMS("removing payload %d\n", i);
+ drm_dbg_kms(mgr->dev, "removing payload %d\n", i);
for (j = i; j < mgr->max_payloads - 1; j++) {
mgr->payloads[j] = mgr->payloads[j + 1];
mgr->proposed_vcpis[j] = mgr->proposed_vcpis[j + 1];
@@ -3499,7 +3504,7 @@ int drm_dp_update_payload_part2(struct drm_dp_mst_topology_mgr *mgr)
port = container_of(mgr->proposed_vcpis[i], struct drm_dp_mst_port, vcpi);
- DRM_DEBUG_KMS("payload %d %d\n", i, mgr->payloads[i].payload_state);
+ drm_dbg_kms(mgr->dev, "payload %d %d\n", i, mgr->payloads[i].payload_state);
if (mgr->payloads[i].payload_state == DP_PAYLOAD_LOCAL) {
ret = drm_dp_create_payload_step2(mgr, port, mgr->proposed_vcpis[i]->vcpi, &mgr->payloads[i]);
} else if (mgr->payloads[i].payload_state == DP_PAYLOAD_DELETE_LOCAL) {
@@ -3544,8 +3549,8 @@ static int drm_dp_send_dpcd_read(struct drm_dp_mst_topology_mgr *mgr,
/* DPCD read should never be NACKed */
if (txmsg->reply.reply_type == 1) {
- DRM_ERROR("mstb %p port %d: DPCD read on addr 0x%x for %d bytes NAKed\n",
- mstb, port->port_num, offset, size);
+ drm_err(mgr->dev, "mstb %p port %d: DPCD read on addr 0x%x for %d bytes NAKed\n",
+ mstb, port->port_num, offset, size);
ret = -EIO;
goto fail_free;
}
@@ -3651,8 +3656,8 @@ int drm_dp_get_vc_payload_bw(const struct drm_dp_mst_topology_mgr *mgr,
int link_rate, int link_lane_count)
{
if (link_rate == 0 || link_lane_count == 0)
- DRM_DEBUG_KMS("invalid link rate/lane count: (%d / %d)\n",
- link_rate, link_lane_count);
+ drm_dbg_kms(mgr->dev, "invalid link rate/lane count: (%d / %d)\n",
+ link_rate, link_lane_count);
/* See DP v2.0 2.6.4.2, VCPayload_Bandwidth_for_OneTimeSlotPer_MTP_Allocation */
return link_rate * link_lane_count / 54000;
@@ -3709,7 +3714,7 @@ int drm_dp_mst_topology_mgr_set_mst(struct drm_dp_mst_topology_mgr *mgr, bool ms
/* get dpcd info */
ret = drm_dp_dpcd_read(mgr->aux, DP_DPCD_REV, mgr->dpcd, DP_RECEIVER_CAP_SIZE);
if (ret != DP_RECEIVER_CAP_SIZE) {
- DRM_DEBUG_KMS("failed to read DPCD\n");
+ drm_dbg_kms(mgr->dev, "failed to read DPCD\n");
goto out_unlock;
}
@@ -3844,7 +3849,7 @@ int drm_dp_mst_topology_mgr_resume(struct drm_dp_mst_topology_mgr *mgr,
ret = drm_dp_dpcd_read(mgr->aux, DP_DPCD_REV, mgr->dpcd,
DP_RECEIVER_CAP_SIZE);
if (ret != DP_RECEIVER_CAP_SIZE) {
- DRM_DEBUG_KMS("dpcd read failed - undocked during suspend?\n");
+ drm_dbg_kms(mgr->dev, "dpcd read failed - undocked during suspend?\n");
goto out_fail;
}
@@ -3853,20 +3858,20 @@ int drm_dp_mst_topology_mgr_resume(struct drm_dp_mst_topology_mgr *mgr,
DP_UP_REQ_EN |
DP_UPSTREAM_IS_SRC);
if (ret < 0) {
- DRM_DEBUG_KMS("mst write failed - undocked during suspend?\n");
+ drm_dbg_kms(mgr->dev, "mst write failed - undocked during suspend?\n");
goto out_fail;
}
/* Some hubs forget their guids after they resume */
ret = drm_dp_dpcd_read(mgr->aux, DP_GUID, guid, 16);
if (ret != 16) {
- DRM_DEBUG_KMS("dpcd read failed - undocked during suspend?\n");
+ drm_dbg_kms(mgr->dev, "dpcd read failed - undocked during suspend?\n");
goto out_fail;
}
ret = drm_dp_check_mstb_guid(mgr->mst_primary, guid);
if (ret) {
- DRM_DEBUG_KMS("check mstb failed - undocked during suspend?\n");
+ drm_dbg_kms(mgr->dev, "check mstb failed - undocked during suspend?\n");
goto out_fail;
}
@@ -3879,7 +3884,8 @@ int drm_dp_mst_topology_mgr_resume(struct drm_dp_mst_topology_mgr *mgr,
mutex_unlock(&mgr->lock);
if (sync) {
- DRM_DEBUG_KMS("Waiting for link probe work to finish re-syncing topology...\n");
+ drm_dbg_kms(mgr->dev,
+ "Waiting for link probe work to finish re-syncing topology...\n");
flush_work(&mgr->work);
}
@@ -3912,15 +3918,15 @@ drm_dp_get_one_sb_msg(struct drm_dp_mst_topology_mgr *mgr, bool up,
len = min(mgr->max_dpcd_transaction_bytes, 16);
ret = drm_dp_dpcd_read(mgr->aux, basereg, replyblock, len);
if (ret != len) {
- DRM_DEBUG_KMS("failed to read DPCD down rep %d %d\n", len, ret);
+ drm_dbg_kms(mgr->dev, "failed to read DPCD down rep %d %d\n", len, ret);
return false;
}
- ret = drm_dp_decode_sideband_msg_hdr(&hdr, replyblock, len, &hdrlen);
+ ret = drm_dp_decode_sideband_msg_hdr(mgr, &hdr, replyblock, len, &hdrlen);
if (ret == false) {
print_hex_dump(KERN_DEBUG, "failed hdr", DUMP_PREFIX_NONE, 16,
1, replyblock, len, false);
- DRM_DEBUG_KMS("ERROR: failed header\n");
+ drm_dbg_kms(mgr->dev, "ERROR: failed header\n");
return false;
}
@@ -3928,22 +3934,20 @@ drm_dp_get_one_sb_msg(struct drm_dp_mst_topology_mgr *mgr, bool up,
/* Caller is responsible for giving back this reference */
*mstb = drm_dp_get_mst_branch_device(mgr, hdr.lct, hdr.rad);
if (!*mstb) {
- DRM_DEBUG_KMS("Got MST reply from unknown device %d\n",
- hdr.lct);
+ drm_dbg_kms(mgr->dev, "Got MST reply from unknown device %d\n", hdr.lct);
return false;
}
}
if (!drm_dp_sideband_msg_set_header(msg, &hdr, hdrlen)) {
- DRM_DEBUG_KMS("sideband msg set header failed %d\n",
- replyblock[0]);
+ drm_dbg_kms(mgr->dev, "sideband msg set header failed %d\n", replyblock[0]);
return false;
}
replylen = min(msg->curchunk_len, (u8)(len - hdrlen));
ret = drm_dp_sideband_append_payload(msg, replyblock + hdrlen, replylen);
if (!ret) {
- DRM_DEBUG_KMS("sideband msg build failed %d\n", replyblock[0]);
+ drm_dbg_kms(mgr->dev, "sideband msg build failed %d\n", replyblock[0]);
return false;
}
@@ -3954,14 +3958,14 @@ drm_dp_get_one_sb_msg(struct drm_dp_mst_topology_mgr *mgr, bool up,
ret = drm_dp_dpcd_read(mgr->aux, basereg + curreply,
replyblock, len);
if (ret != len) {
- DRM_DEBUG_KMS("failed to read a chunk (len %d, ret %d)\n",
- len, ret);
+ drm_dbg_kms(mgr->dev, "failed to read a chunk (len %d, ret %d)\n",
+ len, ret);
return false;
}
ret = drm_dp_sideband_append_payload(msg, replyblock, len);
if (!ret) {
- DRM_DEBUG_KMS("failed to build sideband msg\n");
+ drm_dbg_kms(mgr->dev, "failed to build sideband msg\n");
return false;
}
@@ -3995,21 +3999,21 @@ static int drm_dp_mst_handle_down_rep(struct drm_dp_mst_topology_mgr *mgr)
struct drm_dp_sideband_msg_hdr *hdr;
hdr = &msg->initial_hdr;
- DRM_DEBUG_KMS("Got MST reply with no msg %p %d %d %02x %02x\n",
- mstb, hdr->seqno, hdr->lct, hdr->rad[0],
- msg->msg[0]);
+ drm_dbg_kms(mgr->dev, "Got MST reply with no msg %p %d %d %02x %02x\n",
+ mstb, hdr->seqno, hdr->lct, hdr->rad[0], msg->msg[0]);
goto out_clear_reply;
}
- drm_dp_sideband_parse_reply(msg, &txmsg->reply);
+ drm_dp_sideband_parse_reply(mgr, msg, &txmsg->reply);
if (txmsg->reply.reply_type == DP_SIDEBAND_REPLY_NAK) {
- DRM_DEBUG_KMS("Got NAK reply: req 0x%02x (%s), reason 0x%02x (%s), nak data 0x%02x\n",
- txmsg->reply.req_type,
- drm_dp_mst_req_type_str(txmsg->reply.req_type),
- txmsg->reply.u.nak.reason,
- drm_dp_mst_nak_reason_str(txmsg->reply.u.nak.reason),
- txmsg->reply.u.nak.nak_data);
+ drm_dbg_kms(mgr->dev,
+ "Got NAK reply: req 0x%02x (%s), reason 0x%02x (%s), nak data 0x%02x\n",
+ txmsg->reply.req_type,
+ drm_dp_mst_req_type_str(txmsg->reply.req_type),
+ txmsg->reply.u.nak.reason,
+ drm_dp_mst_nak_reason_str(txmsg->reply.u.nak.reason),
+ txmsg->reply.u.nak.nak_data);
}
memset(msg, 0, sizeof(struct drm_dp_sideband_msg_rx));
@@ -4057,8 +4061,7 @@ drm_dp_mst_process_up_req(struct drm_dp_mst_topology_mgr *mgr,
}
if (!mstb) {
- DRM_DEBUG_KMS("Got MST reply from unknown device %d\n",
- hdr->lct);
+ drm_dbg_kms(mgr->dev, "Got MST reply from unknown device %d\n", hdr->lct);
return false;
}
@@ -4118,12 +4121,12 @@ static int drm_dp_mst_handle_up_req(struct drm_dp_mst_topology_mgr *mgr)
INIT_LIST_HEAD(&up_req->next);
- drm_dp_sideband_parse_req(&mgr->up_req_recv, &up_req->msg);
+ drm_dp_sideband_parse_req(mgr, &mgr->up_req_recv, &up_req->msg);
if (up_req->msg.req_type != DP_CONNECTION_STATUS_NOTIFY &&
up_req->msg.req_type != DP_RESOURCE_STATUS_NOTIFY) {
- DRM_DEBUG_KMS("Received unknown up req type, ignoring: %x\n",
- up_req->msg.req_type);
+ drm_dbg_kms(mgr->dev, "Received unknown up req type, ignoring: %x\n",
+ up_req->msg.req_type);
kfree(up_req);
goto out;
}
@@ -4135,20 +4138,20 @@ static int drm_dp_mst_handle_up_req(struct drm_dp_mst_topology_mgr *mgr)
const struct drm_dp_connection_status_notify *conn_stat =
&up_req->msg.u.conn_stat;
- DRM_DEBUG_KMS("Got CSN: pn: %d ldps:%d ddps: %d mcs: %d ip: %d pdt: %d\n",
- conn_stat->port_number,
- conn_stat->legacy_device_plug_status,
- conn_stat->displayport_device_plug_status,
- conn_stat->message_capability_status,
- conn_stat->input_port,
- conn_stat->peer_device_type);
+ drm_dbg_kms(mgr->dev, "Got CSN: pn: %d ldps:%d ddps: %d mcs: %d ip: %d pdt: %d\n",
+ conn_stat->port_number,
+ conn_stat->legacy_device_plug_status,
+ conn_stat->displayport_device_plug_status,
+ conn_stat->message_capability_status,
+ conn_stat->input_port,
+ conn_stat->peer_device_type);
} else if (up_req->msg.req_type == DP_RESOURCE_STATUS_NOTIFY) {
const struct drm_dp_resource_status_notify *res_stat =
&up_req->msg.u.resource_stat;
- DRM_DEBUG_KMS("Got RSN: pn: %d avail_pbn %d\n",
- res_stat->port_number,
- res_stat->available_pbn);
+ drm_dbg_kms(mgr->dev, "Got RSN: pn: %d avail_pbn %d\n",
+ res_stat->port_number,
+ res_stat->available_pbn);
}
up_req->hdr = mgr->up_req_recv.initial_hdr;
@@ -4388,8 +4391,9 @@ int drm_dp_atomic_find_vcpi_slots(struct drm_atomic_state *state,
* which is an error
*/
if (WARN_ON(!prev_slots)) {
- DRM_ERROR("cannot allocate and release VCPI on [MST PORT:%p] in the same state\n",
- port);
+ drm_err(mgr->dev,
+ "cannot allocate and release VCPI on [MST PORT:%p] in the same state\n",
+ port);
return -EINVAL;
}
@@ -4406,12 +4410,12 @@ int drm_dp_atomic_find_vcpi_slots(struct drm_atomic_state *state,
req_slots = DIV_ROUND_UP(pbn, pbn_div);
- DRM_DEBUG_ATOMIC("[CONNECTOR:%d:%s] [MST PORT:%p] VCPI %d -> %d\n",
- port->connector->base.id, port->connector->name,
- port, prev_slots, req_slots);
- DRM_DEBUG_ATOMIC("[CONNECTOR:%d:%s] [MST PORT:%p] PBN %d -> %d\n",
- port->connector->base.id, port->connector->name,
- port, prev_bw, pbn);
+ drm_dbg_atomic(mgr->dev, "[CONNECTOR:%d:%s] [MST PORT:%p] VCPI %d -> %d\n",
+ port->connector->base.id, port->connector->name,
+ port, prev_slots, req_slots);
+ drm_dbg_atomic(mgr->dev, "[CONNECTOR:%d:%s] [MST PORT:%p] PBN %d -> %d\n",
+ port->connector->base.id, port->connector->name,
+ port, prev_bw, pbn);
/* Add the new allocation to the state */
if (!vcpi) {
@@ -4475,12 +4479,12 @@ int drm_dp_atomic_release_vcpi_slots(struct drm_atomic_state *state,
}
}
if (WARN_ON(!found)) {
- DRM_ERROR("no VCPI for [MST PORT:%p] found in mst state %p\n",
- port, &topology_state->base);
+ drm_err(mgr->dev, "no VCPI for [MST PORT:%p] found in mst state %p\n",
+ port, &topology_state->base);
return -EINVAL;
}
- DRM_DEBUG_ATOMIC("[MST PORT:%p] VCPI %d -> 0\n", port, pos->vcpi);
+ drm_dbg_atomic(mgr->dev, "[MST PORT:%p] VCPI %d -> 0\n", port, pos->vcpi);
if (pos->vcpi) {
drm_dp_mst_put_port_malloc(port);
pos->vcpi = 0;
@@ -4511,8 +4515,9 @@ bool drm_dp_mst_allocate_vcpi(struct drm_dp_mst_topology_mgr *mgr,
return false;
if (port->vcpi.vcpi > 0) {
- DRM_DEBUG_KMS("payload: vcpi %d already allocated for pbn %d - requested pbn %d\n",
- port->vcpi.vcpi, port->vcpi.pbn, pbn);
+ drm_dbg_kms(mgr->dev,
+ "payload: vcpi %d already allocated for pbn %d - requested pbn %d\n",
+ port->vcpi.vcpi, port->vcpi.pbn, pbn);
if (pbn == port->vcpi.pbn) {
drm_dp_mst_topology_put_port(port);
return true;
@@ -4521,13 +4526,12 @@ bool drm_dp_mst_allocate_vcpi(struct drm_dp_mst_topology_mgr *mgr,
ret = drm_dp_init_vcpi(mgr, &port->vcpi, pbn, slots);
if (ret) {
- DRM_DEBUG_KMS("failed to init vcpi slots=%d max=63 ret=%d\n",
- DIV_ROUND_UP(pbn, mgr->pbn_div), ret);
+ drm_dbg_kms(mgr->dev, "failed to init vcpi slots=%d max=63 ret=%d\n",
+ DIV_ROUND_UP(pbn, mgr->pbn_div), ret);
drm_dp_mst_topology_put_port(port);
goto out;
}
- DRM_DEBUG_KMS("initing vcpi for pbn=%d slots=%d\n",
- pbn, port->vcpi.num_slots);
+ drm_dbg_kms(mgr->dev, "initing vcpi for pbn=%d slots=%d\n", pbn, port->vcpi.num_slots);
/* Keep port allocated until its payload has been removed */
drm_dp_mst_get_port_malloc(port);
@@ -4609,14 +4613,14 @@ static int drm_dp_dpcd_write_payload(struct drm_dp_mst_topology_mgr *mgr,
ret = drm_dp_dpcd_write(mgr->aux, DP_PAYLOAD_ALLOCATE_SET, payload_alloc, 3);
if (ret != 3) {
- DRM_DEBUG_KMS("failed to write payload allocation %d\n", ret);
+ drm_dbg_kms(mgr->dev, "failed to write payload allocation %d\n", ret);
goto fail;
}
retry:
ret = drm_dp_dpcd_readb(mgr->aux, DP_PAYLOAD_TABLE_UPDATE_STATUS, &status);
if (ret < 0) {
- DRM_DEBUG_KMS("failed to read payload table status %d\n", ret);
+ drm_dbg_kms(mgr->dev, "failed to read payload table status %d\n", ret);
goto fail;
}
@@ -4626,7 +4630,8 @@ static int drm_dp_dpcd_write_payload(struct drm_dp_mst_topology_mgr *mgr,
usleep_range(10000, 20000);
goto retry;
}
- DRM_DEBUG_KMS("status not set after read payload table status %d\n", status);
+ drm_dbg_kms(mgr->dev, "status not set after read payload table status %d\n",
+ status);
ret = -EINVAL;
goto fail;
}
@@ -4673,16 +4678,15 @@ int drm_dp_check_act_status(struct drm_dp_mst_topology_mgr *mgr)
status & DP_PAYLOAD_ACT_HANDLED || status < 0,
200, timeout_ms * USEC_PER_MSEC);
if (ret < 0 && status >= 0) {
- DRM_ERROR("Failed to get ACT after %dms, last status: %02x\n",
- timeout_ms, status);
+ drm_err(mgr->dev, "Failed to get ACT after %dms, last status: %02x\n",
+ timeout_ms, status);
return -EINVAL;
} else if (status < 0) {
/*
* Failure here isn't unexpected - the hub may have
* just been unplugged
*/
- DRM_DEBUG_KMS("Failed to read payload table status: %d\n",
- status);
+ drm_dbg_kms(mgr->dev, "Failed to read payload table status: %d\n", status);
return status;
}
@@ -5085,12 +5089,11 @@ drm_dp_mst_atomic_check_mstb_bw_limit(struct drm_dp_mst_branch *mstb,
return 0;
if (mstb->port_parent)
- DRM_DEBUG_ATOMIC("[MSTB:%p] [MST PORT:%p] Checking bandwidth limits on [MSTB:%p]\n",
- mstb->port_parent->parent, mstb->port_parent,
- mstb);
+ drm_dbg_atomic(mstb->mgr->dev,
+ "[MSTB:%p] [MST PORT:%p] Checking bandwidth limits on [MSTB:%p]\n",
+ mstb->port_parent->parent, mstb->port_parent, mstb);
else
- DRM_DEBUG_ATOMIC("[MSTB:%p] Checking bandwidth limits\n",
- mstb);
+ drm_dbg_atomic(mstb->mgr->dev, "[MSTB:%p] Checking bandwidth limits\n", mstb);
list_for_each_entry(port, &mstb->ports, next) {
ret = drm_dp_mst_atomic_check_port_bw_limit(port, state);
@@ -5148,14 +5151,14 @@ drm_dp_mst_atomic_check_port_bw_limit(struct drm_dp_mst_port *port,
}
if (pbn_used > port->full_pbn) {
- DRM_DEBUG_ATOMIC("[MSTB:%p] [MST PORT:%p] required PBN of %d exceeds port limit of %d\n",
- port->parent, port, pbn_used,
- port->full_pbn);
+ drm_dbg_atomic(port->mgr->dev,
+ "[MSTB:%p] [MST PORT:%p] required PBN of %d exceeds port limit of %d\n",
+ port->parent, port, pbn_used, port->full_pbn);
return -ENOSPC;
}
- DRM_DEBUG_ATOMIC("[MSTB:%p] [MST PORT:%p] uses %d out of %d PBN\n",
- port->parent, port, pbn_used, port->full_pbn);
+ drm_dbg_atomic(port->mgr->dev, "[MSTB:%p] [MST PORT:%p] uses %d out of %d PBN\n",
+ port->parent, port, pbn_used, port->full_pbn);
return pbn_used;
}
@@ -5170,31 +5173,31 @@ drm_dp_mst_atomic_check_vcpi_alloc_limit(struct drm_dp_mst_topology_mgr *mgr,
list_for_each_entry(vcpi, &mst_state->vcpis, next) {
/* Releasing VCPI is always OK-even if the port is gone */
if (!vcpi->vcpi) {
- DRM_DEBUG_ATOMIC("[MST PORT:%p] releases all VCPI slots\n",
- vcpi->port);
+ drm_dbg_atomic(mgr->dev, "[MST PORT:%p] releases all VCPI slots\n",
+ vcpi->port);
continue;
}
- DRM_DEBUG_ATOMIC("[MST PORT:%p] requires %d vcpi slots\n",
- vcpi->port, vcpi->vcpi);
+ drm_dbg_atomic(mgr->dev, "[MST PORT:%p] requires %d vcpi slots\n",
+ vcpi->port, vcpi->vcpi);
avail_slots -= vcpi->vcpi;
if (avail_slots < 0) {
- DRM_DEBUG_ATOMIC("[MST PORT:%p] not enough VCPI slots in mst state %p (avail=%d)\n",
- vcpi->port, mst_state,
- avail_slots + vcpi->vcpi);
+ drm_dbg_atomic(mgr->dev,
+ "[MST PORT:%p] not enough VCPI slots in mst state %p (avail=%d)\n",
+ vcpi->port, mst_state, avail_slots + vcpi->vcpi);
return -ENOSPC;
}
if (++payload_count > mgr->max_payloads) {
- DRM_DEBUG_ATOMIC("[MST MGR:%p] state %p has too many payloads (max=%d)\n",
- mgr, mst_state, mgr->max_payloads);
+ drm_dbg_atomic(mgr->dev,
+ "[MST MGR:%p] state %p has too many payloads (max=%d)\n",
+ mgr, mst_state, mgr->max_payloads);
return -EINVAL;
}
}
- DRM_DEBUG_ATOMIC("[MST MGR:%p] mst state %p VCPI avail=%d used=%d\n",
- mgr, mst_state, avail_slots,
- 63 - avail_slots);
+ drm_dbg_atomic(mgr->dev, "[MST MGR:%p] mst state %p VCPI avail=%d used=%d\n",
+ mgr, mst_state, avail_slots, 63 - avail_slots);
return 0;
}
@@ -5251,8 +5254,8 @@ int drm_dp_mst_add_affected_dsc_crtcs(struct drm_atomic_state *state, struct drm
if (IS_ERR(crtc_state))
return PTR_ERR(crtc_state);
- DRM_DEBUG_ATOMIC("[MST MGR:%p] Setting mode_changed flag on CRTC %p\n",
- mgr, crtc);
+ drm_dbg_atomic(mgr->dev, "[MST MGR:%p] Setting mode_changed flag on CRTC %p\n",
+ mgr, crtc);
crtc_state->mode_changed = true;
}
@@ -5297,21 +5300,24 @@ int drm_dp_mst_atomic_enable_dsc(struct drm_atomic_state *state,
}
if (!found) {
- DRM_DEBUG_ATOMIC("[MST PORT:%p] Couldn't find VCPI allocation in mst state %p\n",
- port, mst_state);
+ drm_dbg_atomic(state->dev,
+ "[MST PORT:%p] Couldn't find VCPI allocation in mst state %p\n",
+ port, mst_state);
return -EINVAL;
}
if (pos->dsc_enabled == enable) {
- DRM_DEBUG_ATOMIC("[MST PORT:%p] DSC flag is already set to %d, returning %d VCPI slots\n",
- port, enable, pos->vcpi);
+ drm_dbg_atomic(state->dev,
+ "[MST PORT:%p] DSC flag is already set to %d, returning %d VCPI slots\n",
+ port, enable, pos->vcpi);
vcpi = pos->vcpi;
}
if (enable) {
vcpi = drm_dp_atomic_find_vcpi_slots(state, port->mgr, port, pbn, pbn_div);
- DRM_DEBUG_ATOMIC("[MST PORT:%p] Enabling DSC flag, reallocating %d VCPI slots on the port\n",
- port, vcpi);
+ drm_dbg_atomic(state->dev,
+ "[MST PORT:%p] Enabling DSC flag, reallocating %d VCPI slots on the port\n",
+ port, vcpi);
if (vcpi < 0)
return -EINVAL;
}
@@ -5658,7 +5664,7 @@ static int drm_dp_mst_i2c_xfer(struct i2c_adapter *adapter,
} else if (remote_i2c_write_ok(msgs, num)) {
ret = drm_dp_mst_i2c_write(mstb, port, msgs, num);
} else {
- DRM_DEBUG_KMS("Unsupported I2C transaction for MST device\n");
+ drm_dbg_kms(mgr->dev, "Unsupported I2C transaction for MST device\n");
ret = -EIO;
}
--
2.30.2
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply related [flat|nested] 32+ messages in thread* Re: [Nouveau] [PATCH v2 20/20] drm/dp_mst: Convert drm_dp_mst_topology.c to drm_err()/drm_dbg*()
2021-03-26 20:38 ` [Nouveau] [PATCH v2 20/20] drm/dp_mst: Convert drm_dp_mst_topology.c to drm_err()/drm_dbg*() Lyude Paul
@ 2021-03-30 11:19 ` Robert Foss
0 siblings, 0 replies; 32+ messages in thread
From: Robert Foss @ 2021-03-30 11:19 UTC (permalink / raw)
To: Lyude Paul
Cc: dri-devel, David Airlie, nouveau, intel-gfx, Maarten Lankhorst,
open list, Maxime Ripard, amd-gfx, Daniel Vetter
Hey Lyude,
This patch looks good, but I have one question below. With it
addressed, feel free to add my r-b.
Reviewed-by: Robert Foss <robert.foss@linaro.org>
>
> -static bool drm_dp_sideband_parse_req(struct drm_dp_sideband_msg_rx *raw,
> +static bool drm_dp_sideband_parse_req(const struct drm_dp_mst_topology_mgr *mgr,
> + struct drm_dp_sideband_msg_rx *raw,
> struct drm_dp_sideband_msg_req_body *msg)
> {
> memset(msg, 0, sizeof(*msg));
> @@ -1117,12 +1125,12 @@ static bool drm_dp_sideband_parse_req(struct drm_dp_sideband_msg_rx *raw,
>
> switch (msg->req_type) {
> case DP_CONNECTION_STATUS_NOTIFY:
> - return drm_dp_sideband_parse_connection_status_notify(raw, msg);
> + return drm_dp_sideband_parse_connection_status_notify(mgr, raw, msg);
> case DP_RESOURCE_STATUS_NOTIFY:
> - return drm_dp_sideband_parse_resource_status_notify(raw, msg);
> + return drm_dp_sideband_parse_resource_status_notify(mgr, raw, msg);
> default:
> - DRM_ERROR("Got unknown request 0x%02x (%s)\n", msg->req_type,
> - drm_dp_mst_req_type_str(msg->req_type));
> + drm_err(mgr->dev, "Got unknown request 0x%02x (%s)\n",
> + msg->req_type, drm_dp_mst_req_type_str(msg->req_type));
> return false;
> }
> }
>
.. snip ..
> @@ -4118,12 +4121,12 @@ static int drm_dp_mst_handle_up_req(struct drm_dp_mst_topology_mgr *mgr)
>
> INIT_LIST_HEAD(&up_req->next);
>
> - drm_dp_sideband_parse_req(&mgr->up_req_recv, &up_req->msg);
> + drm_dp_sideband_parse_req(mgr, &mgr->up_req_recv, &up_req->msg);
drm_dp_sideband_parse_req() is only called here, and the function
arguments could probably stand to have `&mgr->up_req_recv` removed
(here and in the func. declaration) since the same data structure is
accessible through the `mgr` pointer inside of
drm_dp_sideband_parse_req(). I guess this is a matter of taste, so
feel free to do what you want with this.
>
> if (up_req->msg.req_type != DP_CONNECTION_STATUS_NOTIFY &&
> up_req->msg.req_type != DP_RESOURCE_STATUS_NOTIFY) {
> - DRM_DEBUG_KMS("Received unknown up req type, ignoring: %x\n",
> - up_req->msg.req_type);
> + drm_dbg_kms(mgr->dev, "Received unknown up req type, ignoring: %x\n",
> + up_req->msg.req_type);
> kfree(up_req);
> goto out;
> }
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [Nouveau] [Intel-gfx] [PATCH v2 00/20] drm: Use new DRM printk funcs (like drm_dbg_*()) in DP helpers
2021-03-26 20:37 [Nouveau] [PATCH v2 00/20] drm: Use new DRM printk funcs (like drm_dbg_*()) in DP helpers Lyude Paul
` (19 preceding siblings ...)
2021-03-26 20:38 ` [Nouveau] [PATCH v2 20/20] drm/dp_mst: Convert drm_dp_mst_topology.c to drm_err()/drm_dbg*() Lyude Paul
@ 2021-04-01 13:40 ` Jani Nikula
2021-04-08 10:49 ` Daniel Vetter
20 siblings, 1 reply; 32+ messages in thread
From: Jani Nikula @ 2021-04-01 13:40 UTC (permalink / raw)
To: Lyude Paul, nouveau, dri-devel, amd-gfx, intel-gfx
On Fri, 26 Mar 2021, Lyude Paul <lyude@redhat.com> wrote:
> Since it's been asked quite a few times on some of the various DP
> related patch series I've submitted to use the new DRM printk helpers,
> and it technically wasn't really trivial to do this before due to the
> lack of a consistent way to find a drm_device for an AUX channel, this
> patch series aims to address this. In this series we:
>
> * Clean-up potentially erroneous usages of drm_dp_aux_init() and
> drm_dp_aux_register() so that actual AUX registration doesn't happen
> until we have an associated DRM device
> * Clean-up any obvious errors in drivers we find along the way
> * Add a backpointer to the respective drm_device for an AUX channel in
> drm_dp_aux.drm_dev, and hook it up in every driver with an AUX channel
> across the tree
> * Add a new ratelimited print helper we'll need for converting the DP
> helpers over to using the new DRM printk helpers
> * Fix any inconsistencies with logging in drm_dp_helper.c so we always
> have the aux channel name printed
> * Prepare the various DP helpers so they can find the correct drm_device
> to use for logging
> * And finally, convert all of the DP helpers over to using drm_dbg_*()
> and drm_err().
>
> Series-wide changes in v2:
> * Address most checkpatch issues ('most' as in all except for one line
> going two chars over 100 in "drm/dp_mst: Pass drm_dp_mst_topology_mgr
> to drm_dp_get_vc_payload_bw()" as this was the style in use
> previously, and 2 chars over the limit looks nicer then trying to
> line-wrap this
> * Don't rewrap comments
For anything touching i915, and for merging via whichever tree or branch
seems best,
Acked-by: Jani Nikula <jani.nikula@intel.com>
That said, gut feeling says there will be conflicts before latest
drm-misc-next and drm-intel-next have been merged to drm-next, and
drm-next has been backmerged to drm-misc-next and drm-intel-next.
It just might be a good idea to wait for those (as well as other driver
feature pulls) to settle, do a topic branch with a common ancestor
between drm-next and drm-misc-next, apply there, merge the topic branch
to drm-misc-next, and let all drivers merge the topic branch as
needed. Due to the timing, otherwise we might have to carry the
conflicts for quite a while.
BR,
Jani.
>
> Lyude Paul (20):
> drm/dp: Fixup kernel docs for struct drm_dp_aux
> drm/tegra: Don't register DP AUX channels before connectors
> drm/bridge/cdns-mhdp8546: Register DP aux channel with userspace
> drm/nouveau/kms/nv50-: Move AUX adapter reg to connector late
> register/early unregister
> drm/dp: Add backpointer to drm_device in drm_dp_aux
> drm/dp: Clarify DP AUX registration time
> drm/print: Fixup DRM_DEBUG_KMS_RATELIMITED()
> drm/dp: Pass drm_dp_aux to drm_dp_link_train_clock_recovery_delay()
> drm/dp: Pass drm_dp_aux to drm_dp*_link_train_channel_eq_delay()
> drm/dp: Always print aux channel name in logs
> drm/dp_dual_mode: Pass drm_device to drm_dp_dual_mode_detect()
> drm/dp_dual_mode: Pass drm_device to
> drm_dp_dual_mode_set_tmds_output()
> drm/dp_dual_mode: Pass drm_device to drm_dp_dual_mode_max_tmds_clock()
> drm/dp_dual_mode: Pass drm_device to
> drm_dp_dual_mode_get_tmds_output()
> drm/dp_dual_mode: Pass drm_device to drm_lspcon_(get|set)_mode()
> drm/dp_mst: Pass drm_dp_mst_topology_mgr to drm_dp_get_vc_payload_bw()
> drm/dp: Convert drm_dp_helper.c to using drm_err/drm_dbg_*()
> drm/dp_dual_mode: Convert drm_dp_dual_mode_helper.c to using
> drm_err/drm_dbg_kms()
> drm/dp_mst: Drop DRM_ERROR() on kzalloc() fail in
> drm_dp_mst_handle_up_req()
> drm/dp_mst: Convert drm_dp_mst_topology.c to drm_err()/drm_dbg*()
>
> drivers/gpu/drm/amd/amdgpu/atombios_dp.c | 5 +-
> .../display/amdgpu_dm/amdgpu_dm_mst_types.c | 1 +
> .../drm/bridge/analogix/analogix-anx6345.c | 1 +
> .../drm/bridge/analogix/analogix-anx78xx.c | 1 +
> .../drm/bridge/analogix/analogix_dp_core.c | 1 +
> .../drm/bridge/cadence/cdns-mhdp8546-core.c | 12 +-
> drivers/gpu/drm/bridge/tc358767.c | 1 +
> drivers/gpu/drm/bridge/ti-sn65dsi86.c | 1 +
> drivers/gpu/drm/drm_dp_aux_dev.c | 6 +
> drivers/gpu/drm/drm_dp_dual_mode_helper.c | 68 ++--
> drivers/gpu/drm/drm_dp_helper.c | 181 +++++----
> drivers/gpu/drm/drm_dp_mst_topology.c | 381 +++++++++---------
> drivers/gpu/drm/i915/display/intel_dp_aux.c | 1 +
> .../drm/i915/display/intel_dp_link_training.c | 6 +-
> drivers/gpu/drm/i915/display/intel_dp_mst.c | 3 +-
> drivers/gpu/drm/i915/display/intel_hdmi.c | 7 +-
> drivers/gpu/drm/i915/display/intel_lspcon.c | 17 +-
> drivers/gpu/drm/msm/dp/dp_ctrl.c | 6 +-
> drivers/gpu/drm/msm/edp/edp.h | 3 +-
> drivers/gpu/drm/msm/edp/edp_aux.c | 5 +-
> drivers/gpu/drm/msm/edp/edp_ctrl.c | 8 +-
> drivers/gpu/drm/nouveau/nouveau_connector.c | 27 +-
> drivers/gpu/drm/radeon/atombios_dp.c | 5 +-
> drivers/gpu/drm/tegra/dpaux.c | 12 +-
> drivers/gpu/drm/xlnx/zynqmp_dp.c | 5 +-
> include/drm/drm_dp_dual_mode_helper.h | 14 +-
> include/drm/drm_dp_helper.h | 61 +--
> include/drm/drm_dp_mst_helper.h | 3 +-
> include/drm/drm_print.h | 20 +-
> 29 files changed, 478 insertions(+), 384 deletions(-)
--
Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply [flat|nested] 32+ messages in thread* Re: [Nouveau] [Intel-gfx] [PATCH v2 00/20] drm: Use new DRM printk funcs (like drm_dbg_*()) in DP helpers
2021-04-01 13:40 ` [Nouveau] [Intel-gfx] [PATCH v2 00/20] drm: Use new DRM printk funcs (like drm_dbg_*()) in DP helpers Jani Nikula
@ 2021-04-08 10:49 ` Daniel Vetter
2021-04-08 11:13 ` Jani Nikula
0 siblings, 1 reply; 32+ messages in thread
From: Daniel Vetter @ 2021-04-08 10:49 UTC (permalink / raw)
To: Jani Nikula; +Cc: nouveau, intel-gfx, amd-gfx, dri-devel
On Thu, Apr 01, 2021 at 04:40:33PM +0300, Jani Nikula wrote:
> On Fri, 26 Mar 2021, Lyude Paul <lyude@redhat.com> wrote:
> > Since it's been asked quite a few times on some of the various DP
> > related patch series I've submitted to use the new DRM printk helpers,
> > and it technically wasn't really trivial to do this before due to the
> > lack of a consistent way to find a drm_device for an AUX channel, this
> > patch series aims to address this. In this series we:
> >
> > * Clean-up potentially erroneous usages of drm_dp_aux_init() and
> > drm_dp_aux_register() so that actual AUX registration doesn't happen
> > until we have an associated DRM device
> > * Clean-up any obvious errors in drivers we find along the way
> > * Add a backpointer to the respective drm_device for an AUX channel in
> > drm_dp_aux.drm_dev, and hook it up in every driver with an AUX channel
> > across the tree
> > * Add a new ratelimited print helper we'll need for converting the DP
> > helpers over to using the new DRM printk helpers
> > * Fix any inconsistencies with logging in drm_dp_helper.c so we always
> > have the aux channel name printed
> > * Prepare the various DP helpers so they can find the correct drm_device
> > to use for logging
> > * And finally, convert all of the DP helpers over to using drm_dbg_*()
> > and drm_err().
> >
> > Series-wide changes in v2:
> > * Address most checkpatch issues ('most' as in all except for one line
> > going two chars over 100 in "drm/dp_mst: Pass drm_dp_mst_topology_mgr
> > to drm_dp_get_vc_payload_bw()" as this was the style in use
> > previously, and 2 chars over the limit looks nicer then trying to
> > line-wrap this
> > * Don't rewrap comments
>
> For anything touching i915, and for merging via whichever tree or branch
> seems best,
>
> Acked-by: Jani Nikula <jani.nikula@intel.com>
>
> That said, gut feeling says there will be conflicts before latest
> drm-misc-next and drm-intel-next have been merged to drm-next, and
> drm-next has been backmerged to drm-misc-next and drm-intel-next.
>
> It just might be a good idea to wait for those (as well as other driver
> feature pulls) to settle, do a topic branch with a common ancestor
> between drm-next and drm-misc-next, apply there, merge the topic branch
> to drm-misc-next, and let all drivers merge the topic branch as
> needed. Due to the timing, otherwise we might have to carry the
> conflicts for quite a while.
I think Dave caught up on pulls to drm-next, so after a backmerge of that
to drm-misc-next I think should be all fine to apply directly, no need for
topic branch.
-Daniel
>
> BR,
> Jani.
>
>
> >
> > Lyude Paul (20):
> > drm/dp: Fixup kernel docs for struct drm_dp_aux
> > drm/tegra: Don't register DP AUX channels before connectors
> > drm/bridge/cdns-mhdp8546: Register DP aux channel with userspace
> > drm/nouveau/kms/nv50-: Move AUX adapter reg to connector late
> > register/early unregister
> > drm/dp: Add backpointer to drm_device in drm_dp_aux
> > drm/dp: Clarify DP AUX registration time
> > drm/print: Fixup DRM_DEBUG_KMS_RATELIMITED()
> > drm/dp: Pass drm_dp_aux to drm_dp_link_train_clock_recovery_delay()
> > drm/dp: Pass drm_dp_aux to drm_dp*_link_train_channel_eq_delay()
> > drm/dp: Always print aux channel name in logs
> > drm/dp_dual_mode: Pass drm_device to drm_dp_dual_mode_detect()
> > drm/dp_dual_mode: Pass drm_device to
> > drm_dp_dual_mode_set_tmds_output()
> > drm/dp_dual_mode: Pass drm_device to drm_dp_dual_mode_max_tmds_clock()
> > drm/dp_dual_mode: Pass drm_device to
> > drm_dp_dual_mode_get_tmds_output()
> > drm/dp_dual_mode: Pass drm_device to drm_lspcon_(get|set)_mode()
> > drm/dp_mst: Pass drm_dp_mst_topology_mgr to drm_dp_get_vc_payload_bw()
> > drm/dp: Convert drm_dp_helper.c to using drm_err/drm_dbg_*()
> > drm/dp_dual_mode: Convert drm_dp_dual_mode_helper.c to using
> > drm_err/drm_dbg_kms()
> > drm/dp_mst: Drop DRM_ERROR() on kzalloc() fail in
> > drm_dp_mst_handle_up_req()
> > drm/dp_mst: Convert drm_dp_mst_topology.c to drm_err()/drm_dbg*()
> >
> > drivers/gpu/drm/amd/amdgpu/atombios_dp.c | 5 +-
> > .../display/amdgpu_dm/amdgpu_dm_mst_types.c | 1 +
> > .../drm/bridge/analogix/analogix-anx6345.c | 1 +
> > .../drm/bridge/analogix/analogix-anx78xx.c | 1 +
> > .../drm/bridge/analogix/analogix_dp_core.c | 1 +
> > .../drm/bridge/cadence/cdns-mhdp8546-core.c | 12 +-
> > drivers/gpu/drm/bridge/tc358767.c | 1 +
> > drivers/gpu/drm/bridge/ti-sn65dsi86.c | 1 +
> > drivers/gpu/drm/drm_dp_aux_dev.c | 6 +
> > drivers/gpu/drm/drm_dp_dual_mode_helper.c | 68 ++--
> > drivers/gpu/drm/drm_dp_helper.c | 181 +++++----
> > drivers/gpu/drm/drm_dp_mst_topology.c | 381 +++++++++---------
> > drivers/gpu/drm/i915/display/intel_dp_aux.c | 1 +
> > .../drm/i915/display/intel_dp_link_training.c | 6 +-
> > drivers/gpu/drm/i915/display/intel_dp_mst.c | 3 +-
> > drivers/gpu/drm/i915/display/intel_hdmi.c | 7 +-
> > drivers/gpu/drm/i915/display/intel_lspcon.c | 17 +-
> > drivers/gpu/drm/msm/dp/dp_ctrl.c | 6 +-
> > drivers/gpu/drm/msm/edp/edp.h | 3 +-
> > drivers/gpu/drm/msm/edp/edp_aux.c | 5 +-
> > drivers/gpu/drm/msm/edp/edp_ctrl.c | 8 +-
> > drivers/gpu/drm/nouveau/nouveau_connector.c | 27 +-
> > drivers/gpu/drm/radeon/atombios_dp.c | 5 +-
> > drivers/gpu/drm/tegra/dpaux.c | 12 +-
> > drivers/gpu/drm/xlnx/zynqmp_dp.c | 5 +-
> > include/drm/drm_dp_dual_mode_helper.h | 14 +-
> > include/drm/drm_dp_helper.h | 61 +--
> > include/drm/drm_dp_mst_helper.h | 3 +-
> > include/drm/drm_print.h | 20 +-
> > 29 files changed, 478 insertions(+), 384 deletions(-)
>
> --
> Jani Nikula, Intel Open Source Graphics Center
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply [flat|nested] 32+ messages in thread* Re: [Nouveau] [Intel-gfx] [PATCH v2 00/20] drm: Use new DRM printk funcs (like drm_dbg_*()) in DP helpers
2021-04-08 10:49 ` Daniel Vetter
@ 2021-04-08 11:13 ` Jani Nikula
2021-04-08 18:51 ` Lyude Paul
0 siblings, 1 reply; 32+ messages in thread
From: Jani Nikula @ 2021-04-08 11:13 UTC (permalink / raw)
To: Daniel Vetter; +Cc: nouveau, intel-gfx, amd-gfx, dri-devel
On Thu, 08 Apr 2021, Daniel Vetter <daniel@ffwll.ch> wrote:
> I think Dave caught up on pulls to drm-next, so after a backmerge of that
> to drm-misc-next I think should be all fine to apply directly, no need for
> topic branch.
Yup. We've done the backmerges to drm-intel-next and drm-intel-gt-next,
and are all in sync, it's only the drm-next -> drm-misc-next backmerge
that's still needed.
BR,
Jani.
--
Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [Nouveau] [Intel-gfx] [PATCH v2 00/20] drm: Use new DRM printk funcs (like drm_dbg_*()) in DP helpers
2021-04-08 11:13 ` Jani Nikula
@ 2021-04-08 18:51 ` Lyude Paul
0 siblings, 0 replies; 32+ messages in thread
From: Lyude Paul @ 2021-04-08 18:51 UTC (permalink / raw)
To: Jani Nikula, Daniel Vetter; +Cc: nouveau, intel-gfx, amd-gfx, dri-devel
JFYI too - there was a legitimate looking CI failure on intel with this series,
so don't be surprised if I have to respin a patch or two (I should be able to
get it asap as I finally just cleared most of the stuff on my plate off for a
while)
On Thu, 2021-04-08 at 14:13 +0300, Jani Nikula wrote:
> On Thu, 08 Apr 2021, Daniel Vetter <daniel@ffwll.ch> wrote:
> > I think Dave caught up on pulls to drm-next, so after a backmerge of that
> > to drm-misc-next I think should be all fine to apply directly, no need for
> > topic branch.
>
> Yup. We've done the backmerges to drm-intel-next and drm-intel-gt-next,
> and are all in sync, it's only the drm-next -> drm-misc-next backmerge
> that's still needed.
>
> BR,
> Jani.
>
--
Sincerely,
Lyude Paul (she/her)
Software Engineer at Red Hat
Note: I deal with a lot of emails and have a lot of bugs on my plate. If you've
asked me a question, are waiting for a review/merge on a patch, etc. and I
haven't responded in a while, please feel free to send me another email to check
on my status. I don't bite!
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply [flat|nested] 32+ messages in thread