* Re: [PATCH v2 3/4] PCI: endpoint: Support NTB transfer between RC and EP
[not found] ` <20220222162355.32369-4-Frank.Li@nxp.com>
@ 2022-03-10 22:09 ` Zhi Li
0 siblings, 0 replies; 4+ messages in thread
From: Zhi Li @ 2022-03-10 22:09 UTC (permalink / raw)
To: Frank Li
Cc: Bjorn Helgaas, kishon, lorenzo.pieralisi, kw, Jingoo Han,
gustavo.pimentel, hongxing.zhu, Jon Mason, Dave Jiang,
Allen Hubbe, linux-ntb, linux-pci, ntb
On Tue, Feb 22, 2022 at 10:24 AM Frank Li <Frank.Li@nxp.com> wrote:
>
> Add NTB function driver and virtual PCI Bus and Virtual NTB driver
> to implement communication between PCIe Root Port and PCIe EP devices
>
> ┌────────────┐ ┌─────────────────────────────────────┐
> │ │ │ │
> ├────────────┤ │ ┌──────────────┤
> │ NTB │ │ │ NTB │
> │ NetDev │ │ │ NetDev │
> ├────────────┤ │ ├──────────────┤
> │ NTB │ │ │ NTB │
> │ Transfer │ │ │ Transfer │
> ├────────────┤ │ ├──────────────┤
> │ │ │ │ │
> │ PCI NTB │ │ │ │
> │ EPF │ │ │ │
> │ Driver │ │ │ PCI Virtual │
> │ │ ├───────────────┐ │ NTB Driver │
> │ │ │ PCI EP NTB │◄────►│ │
> │ │ │ FN Driver │ │ │
> ├────────────┤ ├───────────────┤ ├──────────────┤
> │ │ │ │ │ │
> │ PCI Bus │ ◄─────► │ PCI EP Bus │ │ Virtual PCI │
> │ │ PCI │ │ │ Bus │
> └────────────┘ └───────────────┴──────┴──────────────┘
> PCIe Root Port PCI EP
>
> This driver includes 3 parts:
> 1 PCI EP NTB function driver
> 2 Virtual PCI bus
> 3 PCI virtual NTB driver, which is loaded only by above virtual PCI bus
>
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
Update ntb mail list.
> Change from v1:
> - Fix code style problem according to Bjorn's feedback
> - Remove hardcode VPCI_BUS_NUM, let user choose free number by configfs
> - Remove hardcode vid pid for virtual pci ntb driver, change by
> configfs
>
> drivers/pci/endpoint/functions/Kconfig | 11 +
> drivers/pci/endpoint/functions/Makefile | 1 +
> drivers/pci/endpoint/functions/pci-epf-vntb.c | 1424 +++++++++++++++++
> 3 files changed, 1436 insertions(+)
> create mode 100644 drivers/pci/endpoint/functions/pci-epf-vntb.c
>
> diff --git a/drivers/pci/endpoint/functions/Kconfig b/drivers/pci/endpoint/functions/Kconfig
> index 5f1242ca2f4e4..65217428d17b9 100644
> --- a/drivers/pci/endpoint/functions/Kconfig
> +++ b/drivers/pci/endpoint/functions/Kconfig
> @@ -25,3 +25,14 @@ config PCI_EPF_NTB
> device tree.
>
> If in doubt, say "N" to disable Endpoint NTB driver.
> +
> +config PCI_EPF_VNTB
> + tristate "PCI Endpoint NTB driver"
> + depends on PCI_ENDPOINT
> + select CONFIGFS_FS
> + help
> + Select this configuration option to enable the Non-Transparent
> + Bridge (NTB) driver for PCIe Endpoint. NTB driver implements NTB
> + between PCI Root Port and PCIe Endpoint.
> +
> + If in doubt, say "N" to disable Endpoint NTB driver.
> diff --git a/drivers/pci/endpoint/functions/Makefile b/drivers/pci/endpoint/functions/Makefile
> index 96ab932a537a2..5c13001deaba1 100644
> --- a/drivers/pci/endpoint/functions/Makefile
> +++ b/drivers/pci/endpoint/functions/Makefile
> @@ -5,3 +5,4 @@
>
> obj-$(CONFIG_PCI_EPF_TEST) += pci-epf-test.o
> obj-$(CONFIG_PCI_EPF_NTB) += pci-epf-ntb.o
> +obj-$(CONFIG_PCI_EPF_VNTB) += pci-epf-vntb.o
> diff --git a/drivers/pci/endpoint/functions/pci-epf-vntb.c b/drivers/pci/endpoint/functions/pci-epf-vntb.c
> new file mode 100644
> index 0000000000000..1466dd1904175
> --- /dev/null
> +++ b/drivers/pci/endpoint/functions/pci-epf-vntb.c
> @@ -0,0 +1,1424 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Endpoint Function Driver to implement Non-Transparent Bridge functionality
> + * Between PCI RC and EP
> + *
> + * Copyright (C) 2020 Texas Instruments
> + * Copyright (C) 2022 NXP
> + *
> + * Based on pci-epf-ntb.c
> + * Author: Frank Li <Frank.Li@nxp.com>
> + * Author: Kishon Vijay Abraham I <kishon@ti.com>
> + */
> +
> +/**
> + * +------------+ +---------------------------------------+
> + * | | | |
> + * +------------+ | +--------------+
> + * | NTB | | | NTB |
> + * | NetDev | | | NetDev |
> + * +------------+ | +--------------+
> + * | NTB | | | NTB |
> + * | Transfer | | | Transfer |
> + * +------------+ | +--------------+
> + * | | | | |
> + * | PCI NTB | | | |
> + * | EPF | | | |
> + * | Driver | | | PCI Virtual |
> + * | | +---------------+ | NTB Driver |
> + * | | | PCI EP NTB |<------>| |
> + * | | | FN Driver | | |
> + * +------------+ +---------------+ +--------------+
> + * | | | | | |
> + * | PCI Bus | <-----> | PCI EP Bus | | Virtual PCI |
> + * | | PCI | | | Bus |
> + * +------------+ +---------------+--------+--------------+
> + * PCIe Root Port PCI EP
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/slab.h>
> +
> +#include <linux/pci-epc.h>
> +#include <linux/pci-epf.h>
> +#include <linux/ntb.h>
> +
> +static struct workqueue_struct *kpcintb_workqueue;
> +
> +#define COMMAND_CONFIGURE_DOORBELL 1
> +#define COMMAND_TEARDOWN_DOORBELL 2
> +#define COMMAND_CONFIGURE_MW 3
> +#define COMMAND_TEARDOWN_MW 4
> +#define COMMAND_LINK_UP 5
> +#define COMMAND_LINK_DOWN 6
> +
> +#define COMMAND_STATUS_OK 1
> +#define COMMAND_STATUS_ERROR 2
> +
> +#define LINK_STATUS_UP BIT(0)
> +
> +#define SPAD_COUNT 64
> +#define DB_COUNT 4
> +#define NTB_MW_OFFSET 2
> +#define DB_COUNT_MASK GENMASK(15, 0)
> +#define MSIX_ENABLE BIT(16)
> +#define MAX_DB_COUNT 32
> +#define MAX_MW 4
> +
> +enum epf_ntb_bar {
> + BAR_CONFIG,
> + BAR_DB,
> + BAR_MW0,
> + BAR_MW1,
> + BAR_MW2,
> +};
> +
> +/*
> + * +--------------------------------------------------+ Base
> + * | |
> + * | |
> + * | |
> + * | Common Control Register |
> + * | |
> + * | |
> + * | |
> + * +-----------------------+--------------------------+ Base+span_offset
> + * | | |
> + * | Peer Span Space | Span Space |
> + * | | |
> + * | | |
> + * +-----------------------+--------------------------+ Base+span_offset
> + * | | | +span_count * 4
> + * | | |
> + * | Span Space | Peer Span Space |
> + * | | |
> + * +-----------------------+--------------------------+
> + * Virtual PCI PCIe Endpoint
> + * NTB Driver NTB Driver
> + */
> +struct epf_ntb_ctrl {
> + u32 command;
> + u32 argument;
> + u16 command_status;
> + u16 link_status;
> + u32 topology;
> + u64 addr;
> + u64 size;
> + u32 num_mws;
> + u32 reserved;
> + u32 spad_offset;
> + u32 spad_count;
> + u32 db_entry_size;
> + u32 db_data[MAX_DB_COUNT];
> + u32 db_offset[MAX_DB_COUNT];
> +} __packed;
> +
> +struct epf_ntb {
> + struct ntb_dev ntb;
> + struct pci_epf *epf;
> + struct config_group group;
> +
> + u32 num_mws;
> + u32 db_count;
> + u32 spad_count;
> + u64 mws_size[MAX_MW];
> + u64 db;
> + u32 vbus_number;
> + u16 vntb_pid;
> + u16 vntb_vid;
> +
> + bool linkup;
> + u32 spad_size;
> +
> + enum pci_barno epf_ntb_bar[6];
> +
> + struct epf_ntb_ctrl *reg;
> +
> + phys_addr_t epf_db_phy;
> + void __iomem *epf_db;
> +
> + phys_addr_t vpci_mw_phy[MAX_MW];
> + void __iomem *vpci_mw_addr[MAX_MW];
> +
> + struct delayed_work cmd_handler;
> +};
> +
> +#define to_epf_ntb(epf_group) container_of((epf_group), struct epf_ntb, group)
> +#define ntb_ndev(__ntb) container_of(__ntb, struct epf_ntb, ntb)
> +
> +static struct pci_epf_header epf_ntb_header = {
> + .vendorid = PCI_ANY_ID,
> + .deviceid = PCI_ANY_ID,
> + .baseclass_code = PCI_BASE_CLASS_MEMORY,
> + .interrupt_pin = PCI_INTERRUPT_INTA,
> +};
> +
> +/**
> + * epf_ntb_link_up() - Raise link_up interrupt to Virtual Host
> + * @ntb: NTB device that facilitates communication between HOST and VHOST
> + * @link_up: true or false indicating Link is UP or Down
> + *
> + * Once NTB function in HOST invoke ntb_link_enable(),
> + * this NTB function driver will trigger a link event to vhost.
> + */
> +static int epf_ntb_link_up(struct epf_ntb *ntb, bool link_up)
> +{
> + if (link_up)
> + ntb->reg->link_status |= LINK_STATUS_UP;
> + else
> + ntb->reg->link_status &= ~LINK_STATUS_UP;
> +
> + ntb_link_event(&ntb->ntb);
> + return 0;
> +}
> +
> +/**
> + * epf_ntb_configure_mw() - Configure the Outbound Address Space for vhost
> + * to access the memory window of host
> + * @ntb: NTB device that facilitates communication between host and vhost
> + * @mw: Index of the memory window (either 0, 1, 2 or 3)
> + *
> + * EP Outbound Window
> + * +--------+ +-----------+
> + * | | | |
> + * | | | |
> + * | | | |
> + * | | | |
> + * | | +-----------+
> + * | Virtual| | Memory Win|
> + * | NTB | -----------> | |
> + * | Driver | | |
> + * | | +-----------+
> + * | | | |
> + * | | | |
> + * +--------+ +-----------+
> + * VHost PCI EP
> + */
> +static int epf_ntb_configure_mw(struct epf_ntb *ntb, u32 mw)
> +{
> + phys_addr_t phys_addr;
> + u8 func_no, vfunc_no;
> + u64 addr, size;
> + int ret = 0;
> +
> + phys_addr = ntb->vpci_mw_phy[mw];
> + addr = ntb->reg->addr;
> + size = ntb->reg->size;
> +
> + func_no = ntb->epf->func_no;
> + vfunc_no = ntb->epf->vfunc_no;
> +
> + ret = pci_epc_map_addr(ntb->epf->epc, func_no, vfunc_no, phys_addr, addr, size);
> + if (ret)
> + dev_err(&ntb->epf->epc->dev,
> + "Failed to map memory window %d address\n", mw);
> + return ret;
> +}
> +
> +/**
> + * epf_ntb_teardown_mw() - Teardown the configured OB ATU
> + * @ntb: NTB device that facilitates communication between HOST and vHOST
> + * @mw: Index of the memory window (either 0, 1, 2 or 3)
> + *
> + * Teardown the configured OB ATU configured in epf_ntb_configure_mw() using
> + * pci_epc_unmap_addr()
> + */
> +static void epf_ntb_teardown_mw(struct epf_ntb *ntb, u32 mw)
> +{
> + pci_epc_unmap_addr(ntb->epf->epc,
> + ntb->epf->func_no,
> + ntb->epf->vfunc_no,
> + ntb->vpci_mw_phy[mw]);
> +}
> +
> +/**
> + * epf_ntb_cmd_handler() - Handle commands provided by the NTB Host
> + * @work: work_struct for the epf_ntb_epc
> + *
> + * Workqueue function that gets invoked for the two epf_ntb_epc
> + * periodically (once every 5ms) to see if it has received any commands
> + * from NTB host. The host can send commands to configure doorbell or
> + * configure memory window or to update link status.
> + */
> +static void epf_ntb_cmd_handler(struct work_struct *work)
> +{
> + struct epf_ntb_ctrl *ctrl;
> + u32 command, argument;
> + struct epf_ntb *ntb;
> + struct device *dev;
> + int ret;
> + int i;
> +
> + ntb = container_of(work, struct epf_ntb, cmd_handler.work);
> +
> + for (i = 1; i < ntb->db_count; i++) {
> + if (readl(ntb->epf_db + i * 4)) {
> + if (readl(ntb->epf_db + i * 4))
> + ntb->db |= 1 << (i - 1);
> +
> + ntb_db_event(&ntb->ntb, i);
> + writel(0, ntb->epf_db + i * 4);
> + }
> + }
> +
> + ctrl = ntb->reg;
> + command = ctrl->command;
> + if (!command)
> + goto reset_handler;
> + argument = ctrl->argument;
> +
> + ctrl->command = 0;
> + ctrl->argument = 0;
> +
> + ctrl = ntb->reg;
> + dev = &ntb->epf->dev;
> +
> + switch (command) {
> + case COMMAND_CONFIGURE_DOORBELL:
> + ctrl->command_status = COMMAND_STATUS_OK;
> + break;
> + case COMMAND_TEARDOWN_DOORBELL:
> + ctrl->command_status = COMMAND_STATUS_OK;
> + break;
> + case COMMAND_CONFIGURE_MW:
> + ret = epf_ntb_configure_mw(ntb, argument);
> + if (ret < 0)
> + ctrl->command_status = COMMAND_STATUS_ERROR;
> + else
> + ctrl->command_status = COMMAND_STATUS_OK;
> + break;
> + case COMMAND_TEARDOWN_MW:
> + epf_ntb_teardown_mw(ntb, argument);
> + ctrl->command_status = COMMAND_STATUS_OK;
> + break;
> + case COMMAND_LINK_UP:
> + ntb->linkup = true;
> + ret = epf_ntb_link_up(ntb, true);
> + if (ret < 0)
> + ctrl->command_status = COMMAND_STATUS_ERROR;
> + else
> + ctrl->command_status = COMMAND_STATUS_OK;
> + goto reset_handler;
> + case COMMAND_LINK_DOWN:
> + ntb->linkup = false;
> + ret = epf_ntb_link_up(ntb, false);
> + if (ret < 0)
> + ctrl->command_status = COMMAND_STATUS_ERROR;
> + else
> + ctrl->command_status = COMMAND_STATUS_OK;
> + break;
> + default:
> + dev_err(dev, "UNKNOWN command: %d\n", command);
> + break;
> + }
> +
> +reset_handler:
> + queue_delayed_work(kpcintb_workqueue, &ntb->cmd_handler,
> + msecs_to_jiffies(5));
> +}
> +
> +/**
> + * epf_ntb_config_sspad_bar_clear() - Clear Config + Self scratchpad BAR
> + * @ntb_epc: EPC associated with one of the HOST which holds peer's outbound
> + * address.
> + *
> + * Clear BAR0 of EP CONTROLLER 1 which contains the HOST1's config and
> + * self scratchpad region (removes inbound ATU configuration). While BAR0 is
> + * the default self scratchpad BAR, an NTB could have other BARs for self
> + * scratchpad (because of reserved BARs). This function can get the exact BAR
> + * used for self scratchpad from epf_ntb_bar[BAR_CONFIG].
> + *
> + * Please note the self scratchpad region and config region is combined to
> + * a single region and mapped using the same BAR. Also note HOST2's peer
> + * scratchpad is HOST1's self scratchpad.
> + */
> +static void epf_ntb_config_sspad_bar_clear(struct epf_ntb *ntb)
> +{
> + struct pci_epf_bar *epf_bar;
> + enum pci_barno barno;
> +
> + barno = ntb->epf_ntb_bar[BAR_CONFIG];
> + epf_bar = &ntb->epf->bar[barno];
> +
> + pci_epc_clear_bar(ntb->epf->epc, ntb->epf->func_no, ntb->epf->vfunc_no, epf_bar);
> +}
> +
> +/**
> + * epf_ntb_config_sspad_bar_set() - Set Config + Self scratchpad BAR
> + * @ntb: NTB device that facilitates communication between HOST and vHOST
> + *
> + * Map BAR0 of EP CONTROLLER 1 which contains the HOST1's config and
> + * self scratchpad region.
> + *
> + * Please note the self scratchpad region and config region is combined to
> + * a single region and mapped using the same BAR.
> + */
> +static int epf_ntb_config_sspad_bar_set(struct epf_ntb *ntb)
> +{
> + struct pci_epf_bar *epf_bar;
> + enum pci_barno barno;
> + u8 func_no, vfunc_no;
> + struct device *dev;
> + int ret;
> +
> + dev = &ntb->epf->dev;
> + func_no = ntb->epf->func_no;
> + vfunc_no = ntb->epf->vfunc_no;
> + barno = ntb->epf_ntb_bar[BAR_CONFIG];
> + epf_bar = &ntb->epf->bar[barno];
> +
> + ret = pci_epc_set_bar(ntb->epf->epc, func_no, vfunc_no, epf_bar);
> + if (ret) {
> + dev_err(dev, "inft: Config/Status/SPAD BAR set failed\n");
> + return ret;
> + }
> + return 0;
> +}
> +
> +/**
> + * epf_ntb_config_spad_bar_free() - Free the physical memory associated with
> + * config + scratchpad region
> + * @ntb: NTB device that facilitates communication between HOST and vHOST
> + */
> +static void epf_ntb_config_spad_bar_free(struct epf_ntb *ntb)
> +{
> + enum pci_barno barno;
> +
> + barno = ntb->epf_ntb_bar[BAR_CONFIG];
> + pci_epf_free_space(ntb->epf, ntb->reg, barno, 0);
> +}
> +
> +/**
> + * epf_ntb_config_spad_bar_alloc() - Allocate memory for config + scratchpad
> + * region
> + * @ntb: NTB device that facilitates communication between HOST1 and HOST2
> + *
> + * Allocate the Local Memory mentioned in the above diagram. The size of
> + * CONFIG REGION is sizeof(struct epf_ntb_ctrl) and size of SCRATCHPAD REGION
> + * is obtained from "spad-count" configfs entry.
> + */
> +static int epf_ntb_config_spad_bar_alloc(struct epf_ntb *ntb)
> +{
> + size_t align;
> + enum pci_barno barno;
> + struct epf_ntb_ctrl *ctrl;
> + u32 spad_size, ctrl_size;
> + u64 size;
> + struct pci_epf *epf = ntb->epf;
> + struct device *dev = &epf->dev;
> + u32 spad_count;
> + void *base;
> + int i;
> + const struct pci_epc_features *epc_features = pci_epc_get_features(epf->epc,
> + epf->func_no,
> + epf->vfunc_no);
> + barno = ntb->epf_ntb_bar[BAR_CONFIG];
> + size = epc_features->bar_fixed_size[barno];
> + align = epc_features->align;
> +
> + if ((!IS_ALIGNED(size, align)))
> + return -EINVAL;
> +
> + spad_count = ntb->spad_count;
> +
> + ctrl_size = sizeof(struct epf_ntb_ctrl);
> + spad_size = 2 * spad_count * 4;
> +
> + if (!align) {
> + ctrl_size = roundup_pow_of_two(ctrl_size);
> + spad_size = roundup_pow_of_two(spad_size);
> + } else {
> + ctrl_size = ALIGN(ctrl_size, align);
> + spad_size = ALIGN(spad_size, align);
> + }
> +
> + if (!size)
> + size = ctrl_size + spad_size;
> + else if (size < ctrl_size + spad_size)
> + return -EINVAL;
> +
> + base = pci_epf_alloc_space(epf, size, barno, align, 0);
> + if (!base) {
> + dev_err(dev, "Config/Status/SPAD alloc region fail\n");
> + return -ENOMEM;
> + }
> +
> + ntb->reg = base;
> +
> + ctrl = ntb->reg;
> + ctrl->spad_offset = ctrl_size;
> +
> + ctrl->spad_count = spad_count;
> + ctrl->num_mws = ntb->num_mws;
> + ntb->spad_size = spad_size;
> +
> + ctrl->db_entry_size = 4;
> +
> + for (i = 0; i < ntb->db_count; i++) {
> + ntb->reg->db_data[i] = 1 + i;
> + ntb->reg->db_offset[i] = 0;
> + }
> +
> + return 0;
> +}
> +
> +/**
> + * epf_ntb_configure_interrupt() - Configure MSI/MSI-X capaiblity
> + * @ntb: NTB device that facilitates communication between HOST and vHOST
> + *
> + * Configure MSI/MSI-X capability for each interface with number of
> + * interrupts equal to "db_count" configfs entry.
> + */
> +static int epf_ntb_configure_interrupt(struct epf_ntb *ntb)
> +{
> + const struct pci_epc_features *epc_features;
> + struct device *dev;
> + u32 db_count;
> + int ret;
> +
> + dev = &ntb->epf->dev;
> +
> + epc_features = pci_epc_get_features(ntb->epf->epc, ntb->epf->func_no, ntb->epf->vfunc_no);
> +
> + if (!(epc_features->msix_capable || epc_features->msi_capable)) {
> + dev_err(dev, "MSI or MSI-X is required for doorbell\n");
> + return -EINVAL;
> + }
> +
> + db_count = ntb->db_count;
> + if (db_count > MAX_DB_COUNT) {
> + dev_err(dev, "DB count cannot be more than %d\n", MAX_DB_COUNT);
> + return -EINVAL;
> + }
> +
> + ntb->db_count = db_count;
> +
> + if (epc_features->msi_capable) {
> + ret = pci_epc_set_msi(ntb->epf->epc,
> + ntb->epf->func_no,
> + ntb->epf->vfunc_no,
> + 16);
> + if (ret) {
> + dev_err(dev, "MSI configuration failed\n");
> + return ret;
> + }
> + }
> +
> + return 0;
> +}
> +
> +/**
> + * epf_ntb_db_bar_init() - Configure Doorbell window BARs
> + * @ntb: NTB device that facilitates communication between HOST and vHOST
> + */
> +static int epf_ntb_db_bar_init(struct epf_ntb *ntb)
> +{
> + const struct pci_epc_features *epc_features;
> + u32 align;
> + struct device *dev = &ntb->epf->dev;
> + int ret;
> + struct pci_epf_bar *epf_bar;
> + void __iomem *mw_addr;
> + enum pci_barno barno;
> + size_t size = 4 * ntb->db_count;
> +
> + epc_features = pci_epc_get_features(ntb->epf->epc,
> + ntb->epf->func_no,
> + ntb->epf->vfunc_no);
> + align = epc_features->align;
> +
> + if (size < 128)
> + size = 128;
> +
> + if (align)
> + size = ALIGN(size, align);
> + else
> + size = roundup_pow_of_two(size);
> +
> + barno = ntb->epf_ntb_bar[BAR_DB];
> +
> + mw_addr = pci_epf_alloc_space(ntb->epf, size, barno, align, 0);
> + if (!mw_addr) {
> + dev_err(dev, "Failed to allocate OB address\n");
> + return -ENOMEM;
> + }
> +
> + ntb->epf_db = mw_addr;
> +
> + epf_bar = &ntb->epf->bar[barno];
> +
> + ret = pci_epc_set_bar(ntb->epf->epc, ntb->epf->func_no, ntb->epf->vfunc_no, epf_bar);
> + if (ret) {
> + dev_err(dev, "Doorbell BAR set failed\n");
> + goto err_alloc_peer_mem;
> + }
> + return ret;
> +
> +err_alloc_peer_mem:
> + pci_epc_mem_free_addr(ntb->epf->epc, epf_bar->phys_addr, mw_addr, epf_bar->size);
> + return -1;
> +}
> +
> +/**
> + * epf_ntb_db_bar_clear() - Clear doorbell BAR and free memory
> + * allocated in peer's outbound address space
> + * @ntb: NTB device that facilitates communication between HOST and vHOST
> + */
> +static void epf_ntb_db_bar_clear(struct epf_ntb *ntb)
> +{
> + enum pci_barno barno;
> +
> + barno = ntb->epf_ntb_bar[BAR_DB];
> + pci_epf_free_space(ntb->epf, ntb->epf_db, barno, 0);
> + pci_epc_clear_bar(ntb->epf->epc,
> + ntb->epf->func_no,
> + ntb->epf->vfunc_no,
> + &ntb->epf->bar[barno]);
> +}
> +
> +/**
> + * epf_ntb_mw_bar_init() - Configure Memory window BARs
> + * @ntb: NTB device that facilitates communication between HOST and vHOST
> + *
> + */
> +static int epf_ntb_mw_bar_init(struct epf_ntb *ntb)
> +{
> + int ret = 0;
> + int i;
> + u64 size;
> + enum pci_barno barno;
> + struct device *dev = &ntb->epf->dev;
> +
> + for (i = 0; i < ntb->num_mws; i++) {
> + size = ntb->mws_size[i];
> + barno = ntb->epf_ntb_bar[BAR_MW0 + i];
> +
> + ntb->epf->bar[barno].barno = barno;
> + ntb->epf->bar[barno].size = size;
> + ntb->epf->bar[barno].addr = 0;
> + ntb->epf->bar[barno].phys_addr = 0;
> + ntb->epf->bar[barno].flags |= upper_32_bits(size) ?
> + PCI_BASE_ADDRESS_MEM_TYPE_64 :
> + PCI_BASE_ADDRESS_MEM_TYPE_32;
> +
> + ret = pci_epc_set_bar(ntb->epf->epc,
> + ntb->epf->func_no,
> + ntb->epf->vfunc_no,
> + &ntb->epf->bar[barno]);
> + if (ret) {
> + dev_err(dev, "MW set failed\n");
> + goto err_alloc_mem;
> + }
> +
> + /* Allocate EPC outbound memory windows to vpci vntb device */
> + ntb->vpci_mw_addr[i] = pci_epc_mem_alloc_addr(ntb->epf->epc,
> + &ntb->vpci_mw_phy[i],
> + size);
> + if (!ntb->vpci_mw_addr[i]) {
> + dev_err(dev, "Failed to allocate source address\n");
> + goto err_alloc_mem;
> + }
> + }
> +
> + return ret;
> +err_alloc_mem:
> + return ret;
> +}
> +
> +/**
> + * epf_ntb_mw_bar_clear() - Clear Memory window BARs
> + * @ntb: NTB device that facilitates communication between HOST and vHOST
> + */
> +static void epf_ntb_mw_bar_clear(struct epf_ntb *ntb)
> +{
> + enum pci_barno barno;
> + int i;
> +
> + for (i = 0; i < ntb->num_mws; i++) {
> + barno = ntb->epf_ntb_bar[BAR_MW0 + i];
> + pci_epc_clear_bar(ntb->epf->epc,
> + ntb->epf->func_no,
> + ntb->epf->vfunc_no,
> + &ntb->epf->bar[barno]);
> +
> + pci_epc_mem_free_addr(ntb->epf->epc,
> + ntb->vpci_mw_phy[i],
> + ntb->vpci_mw_addr[i],
> + ntb->mws_size[i]);
> + }
> +}
> +
> +/**
> + * epf_ntb_epc_destroy() - Cleanup NTB EPC interface
> + * @ntb: NTB device that facilitates communication between HOST and vHOST
> + *
> + * Wrapper for epf_ntb_epc_destroy_interface() to cleanup all the NTB interfaces
> + */
> +static void epf_ntb_epc_destroy(struct epf_ntb *ntb)
> +{
> + pci_epc_remove_epf(ntb->epf->epc, ntb->epf, 0);
> + pci_epc_put(ntb->epf->epc);
> +}
> +
> +/**
> + * epf_ntb_init_epc_bar() - Identify BARs to be used for each of the NTB
> + * constructs (scratchpad region, doorbell, memorywindow)
> + * @ntb: NTB device that facilitates communication between HOST and vHOST
> + */
> +static int epf_ntb_init_epc_bar(struct epf_ntb *ntb)
> +{
> + const struct pci_epc_features *epc_features;
> + enum pci_barno barno;
> + enum epf_ntb_bar bar;
> + struct device *dev;
> + u32 num_mws;
> + int i;
> +
> + barno = BAR_0;
> + num_mws = ntb->num_mws;
> + dev = &ntb->epf->dev;
> + epc_features = pci_epc_get_features(ntb->epf->epc, ntb->epf->func_no, ntb->epf->vfunc_no);
> +
> + /* These are required BARs which are mandatory for NTB functionality */
> + for (bar = BAR_CONFIG; bar <= BAR_MW0; bar++, barno++) {
> + barno = pci_epc_get_next_free_bar(epc_features, barno);
> + if (barno < 0) {
> + dev_err(dev, "Fail to get NTB function BAR\n");
> + return barno;
> + }
> + ntb->epf_ntb_bar[bar] = barno;
> + }
> +
> + /* These are optional BARs which don't impact NTB functionality */
> + for (bar = BAR_MW1, i = 1; i < num_mws; bar++, barno++, i++) {
> + barno = pci_epc_get_next_free_bar(epc_features, barno);
> + if (barno < 0) {
> + ntb->num_mws = i;
> + dev_dbg(dev, "BAR not available for > MW%d\n", i + 1);
> + }
> + ntb->epf_ntb_bar[bar] = barno;
> + }
> +
> + return 0;
> +}
> +
> +/**
> + * epf_ntb_epc_init() - Initialize NTB interface
> + * @ntb: NTB device that facilitates communication between HOST and vHOST2
> + *
> + * Wrapper to initialize a particular EPC interface and start the workqueue
> + * to check for commands from host. This function will write to the
> + * EP controller HW for configuring it.
> + */
> +static int epf_ntb_epc_init(struct epf_ntb *ntb)
> +{
> + u8 func_no, vfunc_no;
> + struct pci_epc *epc;
> + struct pci_epf *epf;
> + struct device *dev;
> + int ret;
> +
> + epf = ntb->epf;
> + dev = &epf->dev;
> + epc = epf->epc;
> + func_no = ntb->epf->func_no;
> + vfunc_no = ntb->epf->vfunc_no;
> +
> + ret = epf_ntb_config_sspad_bar_set(ntb);
> + if (ret) {
> + dev_err(dev, "Config/self SPAD BAR init failed");
> + return ret;
> + }
> +
> + ret = epf_ntb_configure_interrupt(ntb);
> + if (ret) {
> + dev_err(dev, "Interrupt configuration failed\n");
> + goto err_config_interrupt;
> + }
> +
> + ret = epf_ntb_db_bar_init(ntb);
> + if (ret) {
> + dev_err(dev, "DB BAR init failed\n");
> + goto err_db_bar_init;
> + }
> +
> + ret = epf_ntb_mw_bar_init(ntb);
> + if (ret) {
> + dev_err(dev, "MW BAR init failed\n");
> + goto err_mw_bar_init;
> + }
> +
> + if (vfunc_no <= 1) {
> + ret = pci_epc_write_header(epc, func_no, vfunc_no, epf->header);
> + if (ret) {
> + dev_err(dev, "Configuration header write failed\n");
> + goto err_write_header;
> + }
> + }
> +
> + INIT_DELAYED_WORK(&ntb->cmd_handler, epf_ntb_cmd_handler);
> + queue_work(kpcintb_workqueue, &ntb->cmd_handler.work);
> +
> + return 0;
> +
> +err_write_header:
> + epf_ntb_mw_bar_clear(ntb);
> +err_mw_bar_init:
> + epf_ntb_db_bar_clear(ntb);
> +err_db_bar_init:
> +err_config_interrupt:
> + epf_ntb_config_sspad_bar_clear(ntb);
> +
> + return ret;
> +}
> +
> +
> +/**
> + * epf_ntb_epc_cleanup() - Cleanup all NTB interfaces
> + * @ntb: NTB device that facilitates communication between HOST1 and HOST2
> + *
> + * Wrapper to cleanup all NTB interfaces.
> + */
> +static void epf_ntb_epc_cleanup(struct epf_ntb *ntb)
> +{
> + epf_ntb_db_bar_clear(ntb);
> + epf_ntb_mw_bar_clear(ntb);
> +}
> +
> +#define EPF_NTB_R(_name) \
> +static ssize_t epf_ntb_##_name##_show(struct config_item *item, \
> + char *page) \
> +{ \
> + struct config_group *group = to_config_group(item); \
> + struct epf_ntb *ntb = to_epf_ntb(group); \
> + \
> + return sprintf(page, "%d\n", ntb->_name); \
> +}
> +
> +#define EPF_NTB_W(_name) \
> +static ssize_t epf_ntb_##_name##_store(struct config_item *item, \
> + const char *page, size_t len) \
> +{ \
> + struct config_group *group = to_config_group(item); \
> + struct epf_ntb *ntb = to_epf_ntb(group); \
> + u32 val; \
> + int ret; \
> + \
> + ret = kstrtou32(page, 0, &val); \
> + if (ret) \
> + return ret; \
> + \
> + ntb->_name = val; \
> + \
> + return len; \
> +}
> +
> +#define EPF_NTB_MW_R(_name) \
> +static ssize_t epf_ntb_##_name##_show(struct config_item *item, \
> + char *page) \
> +{ \
> + struct config_group *group = to_config_group(item); \
> + struct epf_ntb *ntb = to_epf_ntb(group); \
> + int win_no; \
> + \
> + sscanf(#_name, "mw%d", &win_no); \
> + \
> + return sprintf(page, "%lld\n", ntb->mws_size[win_no - 1]); \
> +}
> +
> +#define EPF_NTB_MW_W(_name) \
> +static ssize_t epf_ntb_##_name##_store(struct config_item *item, \
> + const char *page, size_t len) \
> +{ \
> + struct config_group *group = to_config_group(item); \
> + struct epf_ntb *ntb = to_epf_ntb(group); \
> + struct device *dev = &ntb->epf->dev; \
> + int win_no; \
> + u64 val; \
> + int ret; \
> + \
> + ret = kstrtou64(page, 0, &val); \
> + if (ret) \
> + return ret; \
> + \
> + if (sscanf(#_name, "mw%d", &win_no) != 1) \
> + return -EINVAL; \
> + \
> + if (ntb->num_mws < win_no) { \
> + dev_err(dev, "Invalid num_nws: %d value\n", ntb->num_mws); \
> + return -EINVAL; \
> + } \
> + \
> + ntb->mws_size[win_no - 1] = val; \
> + \
> + return len; \
> +}
> +
> +static ssize_t epf_ntb_num_mws_store(struct config_item *item,
> + const char *page, size_t len)
> +{
> + struct config_group *group = to_config_group(item);
> + struct epf_ntb *ntb = to_epf_ntb(group);
> + u32 val;
> + int ret;
> +
> + ret = kstrtou32(page, 0, &val);
> + if (ret)
> + return ret;
> +
> + if (val > MAX_MW)
> + return -EINVAL;
> +
> + ntb->num_mws = val;
> +
> + return len;
> +}
> +
> +EPF_NTB_R(spad_count)
> +EPF_NTB_W(spad_count)
> +EPF_NTB_R(db_count)
> +EPF_NTB_W(db_count)
> +EPF_NTB_R(num_mws)
> +EPF_NTB_R(vbus_number)
> +EPF_NTB_W(vbus_number)
> +EPF_NTB_R(vntb_pid)
> +EPF_NTB_W(vntb_pid)
> +EPF_NTB_R(vntb_vid)
> +EPF_NTB_W(vntb_vid)
> +EPF_NTB_MW_R(mw1)
> +EPF_NTB_MW_W(mw1)
> +EPF_NTB_MW_R(mw2)
> +EPF_NTB_MW_W(mw2)
> +EPF_NTB_MW_R(mw3)
> +EPF_NTB_MW_W(mw3)
> +EPF_NTB_MW_R(mw4)
> +EPF_NTB_MW_W(mw4)
> +
> +CONFIGFS_ATTR(epf_ntb_, spad_count);
> +CONFIGFS_ATTR(epf_ntb_, db_count);
> +CONFIGFS_ATTR(epf_ntb_, num_mws);
> +CONFIGFS_ATTR(epf_ntb_, mw1);
> +CONFIGFS_ATTR(epf_ntb_, mw2);
> +CONFIGFS_ATTR(epf_ntb_, mw3);
> +CONFIGFS_ATTR(epf_ntb_, mw4);
> +CONFIGFS_ATTR(epf_ntb_, vbus_number);
> +CONFIGFS_ATTR(epf_ntb_, vntb_pid);
> +CONFIGFS_ATTR(epf_ntb_, vntb_vid);
> +
> +static struct configfs_attribute *epf_ntb_attrs[] = {
> + &epf_ntb_attr_spad_count,
> + &epf_ntb_attr_db_count,
> + &epf_ntb_attr_num_mws,
> + &epf_ntb_attr_mw1,
> + &epf_ntb_attr_mw2,
> + &epf_ntb_attr_mw3,
> + &epf_ntb_attr_mw4,
> + &epf_ntb_attr_vbus_number,
> + &epf_ntb_attr_vntb_pid,
> + &epf_ntb_attr_vntb_vid,
> + NULL,
> +};
> +
> +static const struct config_item_type ntb_group_type = {
> + .ct_attrs = epf_ntb_attrs,
> + .ct_owner = THIS_MODULE,
> +};
> +
> +/**
> + * epf_ntb_add_cfs() - Add configfs directory specific to NTB
> + * @epf: NTB endpoint function device
> + * @group: A pointer to the config_group structure referencing a group of
> + * config_items of a specific type that belong to a specific sub-system.
> + *
> + * Add configfs directory specific to NTB. This directory will hold
> + * NTB specific properties like db_count, spad_count, num_mws etc.,
> + */
> +static struct config_group *epf_ntb_add_cfs(struct pci_epf *epf,
> + struct config_group *group)
> +{
> + struct epf_ntb *ntb = epf_get_drvdata(epf);
> + struct config_group *ntb_group = &ntb->group;
> + struct device *dev = &epf->dev;
> +
> + config_group_init_type_name(ntb_group, dev_name(dev), &ntb_group_type);
> +
> + return ntb_group;
> +}
> +
> +/*==== virtual PCI bus driver, which only load virtual NTB PCI driver ====*/
> +
> +static u32 pci_space[] = {
> + 0xffffffff, /*DeviceID, Vendor ID*/
> + 0, /*Status, Command*/
> + 0xffffffff, /*Class code, subclass, prog if, revision id*/
> + 0x40, /*bist, header type, latency Timer, cache line size*/
> + 0, /*BAR 0*/
> + 0, /*BAR 1*/
> + 0, /*BAR 2*/
> + 0, /*BAR 3*/
> + 0, /*BAR 4*/
> + 0, /*BAR 5*/
> + 0, /*Cardbus cis point*/
> + 0, /*Subsystem ID Subystem vendor id*/
> + 0, /*ROM Base Address*/
> + 0, /*Reserved, Cap. Point*/
> + 0, /*Reserved,*/
> + 0, /*Max Lat, Min Gnt, interrupt pin, interrupt line*/
> +};
> +
> +int pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val)
> +{
> + if (devfn == 0) {
> + memcpy(val, ((u8 *)pci_space) + where, size);
> + return PCIBIOS_SUCCESSFUL;
> + }
> + return PCIBIOS_DEVICE_NOT_FOUND;
> +}
> +
> +int pci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val)
> +{
> + return 0;
> +}
> +
> +struct pci_ops vpci_ops = {
> + .read = pci_read,
> + .write = pci_write,
> +};
> +
> +static int vpci_scan_bus(void *sysdata)
> +{
> + struct pci_bus *vpci_bus;
> + struct epf_ntb *ndev = sysdata;
> +
> + vpci_bus = pci_scan_bus(ndev->vbus_number, &vpci_ops, sysdata);
> + if (vpci_bus)
> + pr_err("create pci bus\n");
> +
> + pci_bus_add_devices(vpci_bus);
> +
> + return 0;
> +}
> +
> +/*==================== Virtual PCIe NTB driver ==========================*/
> +
> +static int vntb_epf_mw_count(struct ntb_dev *ntb, int pidx)
> +{
> + struct epf_ntb *ndev = ntb_ndev(ntb);
> +
> + return ndev->num_mws;
> +}
> +
> +static int vntb_epf_spad_count(struct ntb_dev *ntb)
> +{
> + return ntb_ndev(ntb)->spad_count;
> +}
> +
> +static int vntb_epf_peer_mw_count(struct ntb_dev *ntb)
> +{
> + return ntb_ndev(ntb)->num_mws;
> +}
> +
> +static u64 vntb_epf_db_valid_mask(struct ntb_dev *ntb)
> +{
> + return BIT_ULL(ntb_ndev(ntb)->db_count) - 1;
> +}
> +
> +static int vntb_epf_db_set_mask(struct ntb_dev *ntb, u64 db_bits)
> +{
> + return 0;
> +}
> +
> +static int vntb_epf_mw_set_trans(struct ntb_dev *ndev, int pidx, int idx,
> + dma_addr_t addr, resource_size_t size)
> +{
> + struct epf_ntb *ntb = ntb_ndev(ndev);
> + struct pci_epf_bar *epf_bar;
> + enum pci_barno barno;
> + int ret;
> + struct device *dev;
> +
> + dev = &ntb->ntb.dev;
> + barno = ntb->epf_ntb_bar[BAR_MW0 + idx];
> + epf_bar = &ntb->epf->bar[barno];
> + epf_bar->phys_addr = addr;
> + epf_bar->barno = barno;
> + epf_bar->size = size;
> +
> + ret = pci_epc_set_bar(ntb->epf->epc, 0, 0, epf_bar);
> + if (ret) {
> + dev_err(dev, "failure set mw trans\n");
> + return ret;
> + }
> + return 0;
> +}
> +
> +static int vntb_epf_mw_clear_trans(struct ntb_dev *ntb, int pidx, int idx)
> +{
> + return 0;
> +}
> +
> +static int vntb_epf_peer_mw_get_addr(struct ntb_dev *ndev, int idx,
> + phys_addr_t *base, resource_size_t *size)
> +{
> +
> + struct epf_ntb *ntb = ntb_ndev(ndev);
> +
> + if (base)
> + *base = ntb->vpci_mw_phy[idx];
> +
> + if (size)
> + *size = ntb->mws_size[idx];
> +
> + return 0;
> +}
> +
> +static int vntb_epf_link_enable(struct ntb_dev *ntb,
> + enum ntb_speed max_speed,
> + enum ntb_width max_width)
> +{
> + return 0;
> +}
> +
> +static u32 vntb_epf_spad_read(struct ntb_dev *ndev, int idx)
> +{
> + struct epf_ntb *ntb = ntb_ndev(ndev);
> + int off = ntb->reg->spad_offset, ct = ntb->reg->spad_count * 4;
> + u32 val;
> + void __iomem *base = ntb->reg;
> +
> + val = readl(base + off + ct + idx * 4);
> + return val;
> +}
> +
> +static int vntb_epf_spad_write(struct ntb_dev *ndev, int idx, u32 val)
> +{
> + struct epf_ntb *ntb = ntb_ndev(ndev);
> + struct epf_ntb_ctrl *ctrl = ntb->reg;
> + int off = ctrl->spad_offset, ct = ctrl->spad_count * 4;
> + void __iomem *base = ntb->reg;
> +
> + writel(val, base + off + ct + idx * 4);
> + return 0;
> +}
> +
> +static u32 vntb_epf_peer_spad_read(struct ntb_dev *ndev, int pidx, int idx)
> +{
> + struct epf_ntb *ntb = ntb_ndev(ndev);
> + struct epf_ntb_ctrl *ctrl = ntb->reg;
> + int off = ctrl->spad_offset;
> + void __iomem *base = ntb->reg;
> + u32 val;
> +
> + val = readl(base + off + idx * 4);
> + return val;
> +}
> +
> +static int vntb_epf_peer_spad_write(struct ntb_dev *ndev, int pidx, int idx, u32 val)
> +{
> + struct epf_ntb *ntb = ntb_ndev(ndev);
> + struct epf_ntb_ctrl *ctrl = ntb->reg;
> + int off = ctrl->spad_offset;
> + void __iomem *base = ntb->reg;
> +
> + writel(val, base + off + idx * 4);
> + return 0;
> +}
> +
> +static int vntb_epf_peer_db_set(struct ntb_dev *ndev, u64 db_bits)
> +{
> + u32 interrupt_num = ffs(db_bits) + 1;
> + struct epf_ntb *ntb = ntb_ndev(ndev);
> + u8 func_no, vfunc_no;
> + int ret;
> +
> + func_no = ntb->epf->func_no;
> + vfunc_no = ntb->epf->vfunc_no;
> +
> + ret = pci_epc_raise_irq(ntb->epf->epc,
> + func_no,
> + vfunc_no,
> + PCI_EPC_IRQ_MSI,
> + interrupt_num + 1);
> + if (ret)
> + dev_err(&ntb->ntb.dev, "Failed to raise IRQ\n");
> +
> + return ret;
> +}
> +
> +static u64 vntb_epf_db_read(struct ntb_dev *ndev)
> +{
> + struct epf_ntb *ntb = ntb_ndev(ndev);
> +
> + return ntb->db;
> +}
> +
> +static int vntb_epf_mw_get_align(struct ntb_dev *ndev, int pidx, int idx,
> + resource_size_t *addr_align,
> + resource_size_t *size_align,
> + resource_size_t *size_max)
> +{
> + struct epf_ntb *ntb = ntb_ndev(ndev);
> +
> + if (addr_align)
> + *addr_align = SZ_4K;
> +
> + if (size_align)
> + *size_align = 1;
> +
> + if (size_max)
> + *size_max = ntb->mws_size[idx];
> +
> + return 0;
> +}
> +
> +static u64 vntb_epf_link_is_up(struct ntb_dev *ndev,
> + enum ntb_speed *speed,
> + enum ntb_width *width)
> +{
> + struct epf_ntb *ntb = ntb_ndev(ndev);
> +
> + return ntb->reg->link_status;
> +}
> +
> +static int vntb_epf_db_clear_mask(struct ntb_dev *ndev, u64 db_bits)
> +{
> + return 0;
> +}
> +
> +static int vntb_epf_db_clear(struct ntb_dev *ndev, u64 db_bits)
> +{
> + struct epf_ntb *ntb = ntb_ndev(ndev);
> +
> + ntb->db &= ~db_bits;
> + return 0;
> +}
> +
> +static int vntb_epf_link_disable(struct ntb_dev *ntb)
> +{
> + return 0;
> +}
> +
> +static const struct ntb_dev_ops vntb_epf_ops = {
> + .mw_count = vntb_epf_mw_count,
> + .spad_count = vntb_epf_spad_count,
> + .peer_mw_count = vntb_epf_peer_mw_count,
> + .db_valid_mask = vntb_epf_db_valid_mask,
> + .db_set_mask = vntb_epf_db_set_mask,
> + .mw_set_trans = vntb_epf_mw_set_trans,
> + .mw_clear_trans = vntb_epf_mw_clear_trans,
> + .peer_mw_get_addr = vntb_epf_peer_mw_get_addr,
> + .link_enable = vntb_epf_link_enable,
> + .spad_read = vntb_epf_spad_read,
> + .spad_write = vntb_epf_spad_write,
> + .peer_spad_read = vntb_epf_peer_spad_read,
> + .peer_spad_write = vntb_epf_peer_spad_write,
> + .peer_db_set = vntb_epf_peer_db_set,
> + .db_read = vntb_epf_db_read,
> + .mw_get_align = vntb_epf_mw_get_align,
> + .link_is_up = vntb_epf_link_is_up,
> + .db_clear_mask = vntb_epf_db_clear_mask,
> + .db_clear = vntb_epf_db_clear,
> + .link_disable = vntb_epf_link_disable,
> +};
> +
> +static int pci_vntb_probe(struct pci_dev *pdev, const struct pci_device_id *id)
> +{
> + int ret;
> + struct epf_ntb *ndev = (struct epf_ntb *)pdev->sysdata;
> + struct device *dev = &pdev->dev;
> +
> + ndev->ntb.pdev = pdev;
> + ndev->ntb.topo = NTB_TOPO_NONE;
> + ndev->ntb.ops = &vntb_epf_ops;
> +
> + ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
> + if (ret) {
> + dev_err(dev, "Cannot set DMA mask\n");
> + return -EINVAL;
> + }
> +
> + ret = ntb_register_device(&ndev->ntb);
> + if (ret) {
> + dev_err(dev, "Failed to register NTB device\n");
> + goto err_register_dev;
> + }
> +
> + dev_dbg(dev, "PCI Virtual NTB driver loaded\n");
> + return 0;
> +
> +err_register_dev:
> + return -EINVAL;
> +}
> +
> +static struct pci_device_id pci_vntb_table[] = {
> + {
> + PCI_DEVICE(0xffff, 0xffff),
> + },
> + {},
> +};
> +
> +static struct pci_driver vntb_pci_driver = {
> + .name = "pci-vntb",
> + .id_table = pci_vntb_table,
> + .probe = pci_vntb_probe,
> +};
> +
> +/* ============ PCIe EPF Driver Bind ====================*/
> +
> +/**
> + * epf_ntb_bind() - Initialize endpoint controller to provide NTB functionality
> + * @epf: NTB endpoint function device
> + *
> + * Initialize both the endpoint controllers associated with NTB function device.
> + * Invoked when a primary interface or secondary interface is bound to EPC
> + * device. This function will succeed only when EPC is bound to both the
> + * interfaces.
> + */
> +static int epf_ntb_bind(struct pci_epf *epf)
> +{
> + struct epf_ntb *ntb = epf_get_drvdata(epf);
> + struct device *dev = &epf->dev;
> + int ret;
> +
> + if (!epf->epc) {
> + dev_dbg(dev, "PRIMARY EPC interface not yet bound\n");
> + return 0;
> + }
> +
> + ret = epf_ntb_init_epc_bar(ntb);
> + if (ret) {
> + dev_err(dev, "Failed to create NTB EPC\n");
> + goto err_bar_init;
> + }
> +
> + ret = epf_ntb_config_spad_bar_alloc(ntb);
> + if (ret) {
> + dev_err(dev, "Failed to allocate BAR memory\n");
> + goto err_bar_alloc;
> + }
> +
> + ret = epf_ntb_epc_init(ntb);
> + if (ret) {
> + dev_err(dev, "Failed to initialize EPC\n");
> + goto err_bar_alloc;
> + }
> +
> + epf_set_drvdata(epf, ntb);
> +
> + pci_space[0] = (ntb->vntb_pid << 16) | ntb->vntb_vid;
> + pci_vntb_table[0].vendor = ntb->vntb_vid;
> + pci_vntb_table[0].device = ntb->vntb_pid;
> +
> + if (pci_register_driver(&vntb_pci_driver)) {
> + dev_err(dev, "failure register vntb pci driver\n");
> + goto err_bar_alloc;
> + }
> +
> + vpci_scan_bus(ntb);
> +
> + return 0;
> +
> +err_bar_alloc:
> + epf_ntb_config_spad_bar_free(ntb);
> +
> +err_bar_init:
> + epf_ntb_epc_destroy(ntb);
> +
> + return ret;
> +}
> +
> +/**
> + * epf_ntb_unbind() - Cleanup the initialization from epf_ntb_bind()
> + * @epf: NTB endpoint function device
> + *
> + * Cleanup the initialization from epf_ntb_bind()
> + */
> +static void epf_ntb_unbind(struct pci_epf *epf)
> +{
> + struct epf_ntb *ntb = epf_get_drvdata(epf);
> +
> + epf_ntb_epc_cleanup(ntb);
> + epf_ntb_config_spad_bar_free(ntb);
> + epf_ntb_epc_destroy(ntb);
> +
> + pci_unregister_driver(&vntb_pci_driver);
> +}
> +
> +// EPF driver probe
> +static struct pci_epf_ops epf_ntb_ops = {
> + .bind = epf_ntb_bind,
> + .unbind = epf_ntb_unbind,
> + .add_cfs = epf_ntb_add_cfs,
> +};
> +
> +/**
> + * epf_ntb_probe() - Probe NTB function driver
> + * @epf: NTB endpoint function device
> + *
> + * Probe NTB function driver when endpoint function bus detects a NTB
> + * endpoint function.
> + */
> +static int epf_ntb_probe(struct pci_epf *epf)
> +{
> + struct epf_ntb *ntb;
> + struct device *dev;
> +
> + dev = &epf->dev;
> +
> + ntb = devm_kzalloc(dev, sizeof(*ntb), GFP_KERNEL);
> + if (!ntb)
> + return -ENOMEM;
> +
> + epf->header = &epf_ntb_header;
> + ntb->epf = epf;
> + ntb->vbus_number = 0xff;
> + epf_set_drvdata(epf, ntb);
> +
> + dev_info(dev, "pci-ep epf driver loaded\n");
> + return 0;
> +}
> +
> +static const struct pci_epf_device_id epf_ntb_ids[] = {
> + {
> + .name = "pci_epf_vntb",
> + },
> + {},
> +};
> +
> +static struct pci_epf_driver epf_ntb_driver = {
> + .driver.name = "pci_epf_vntb",
> + .probe = epf_ntb_probe,
> + .id_table = epf_ntb_ids,
> + .ops = &epf_ntb_ops,
> + .owner = THIS_MODULE,
> +};
> +
> +static int __init epf_ntb_init(void)
> +{
> + int ret;
> +
> + kpcintb_workqueue = alloc_workqueue("kpcintb", WQ_MEM_RECLAIM |
> + WQ_HIGHPRI, 0);
> + ret = pci_epf_register_driver(&epf_ntb_driver);
> + if (ret) {
> + destroy_workqueue(kpcintb_workqueue);
> + pr_err("Failed to register pci epf ntb driver --> %d\n", ret);
> + return ret;
> + }
> +
> + return 0;
> +}
> +module_init(epf_ntb_init);
> +
> +static void __exit epf_ntb_exit(void)
> +{
> + pci_epf_unregister_driver(&epf_ntb_driver);
> + destroy_workqueue(kpcintb_workqueue);
> +}
> +module_exit(epf_ntb_exit);
> +
> +MODULE_DESCRIPTION("PCI EPF NTB DRIVER");
> +MODULE_AUTHOR("Frank Li <Frank.li@nxp.com>");
> +MODULE_LICENSE("GPL v2");
> --
> 2.24.0.rc1
>
^ permalink raw reply [flat|nested] 4+ messages in thread