From: Dan Williams <dan.j.williams@intel.com>
To: linux-nvdimm@lists.01.org
Subject: [ndctl PATCH v2 25/26] ndctl/namespace: Continue region search on 'missing seed' event
Date: Sat, 27 Jul 2019 14:41:34 -0700 [thread overview]
Message-ID: <156426369414.531577.11315264374951747460.stgit@dwillia2-desk3.amr.corp.intel.com> (raw)
In-Reply-To: <156426356088.531577.14828880045306313118.stgit@dwillia2-desk3.amr.corp.intel.com>
Consider a scenario where one region is in an error state but another is
not:
# ndctl list -Ru
[
{
"dev":"region3",
"size":"127.00 GiB (136.37 GB)",
"available_size":0,
"max_available_extent":0,
"type":"pmem",
"persistence_domain":"unknown"
},
{
"dev":"region2",
"size":"127.00 GiB (136.37 GB)",
"available_size":"127.00 GiB (136.37 GB)",
"max_available_extent":"127.00 GiB (136.37 GB)",
"type":"pmem",
"iset_id":"0xba90120012b4dc",
"persistence_domain":"unknown"
}
]
# ndctl create-namespace -m devdax -v
[..]
namespace_create:887: region3: no idle namespace seed
failed to create namespace: No such device
Instead of failing when probing region3 for capacity, fallback to
region2.
# ndctl create-namespace -m devdax
{
"dev":"namespace2.0",
"mode":"devdax",
"map":"dev",
"size":"125.01 GiB (134.23 GB)",
"uuid":"c3fa7d2f-6c20-4762-9aa8-627d06275e03",
"daxregion":{
"id":2,
"size":"125.01 GiB (134.23 GB)",
"align":2097152,
"devices":[
{
"chardev":"dax2.0",
"size":"125.01 GiB (134.23 GB)"
}
]
},
"align":2097152
}
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
ndctl/namespace.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/ndctl/namespace.c b/ndctl/namespace.c
index f215f77a94e1..bbc9107c6baa 100644
--- a/ndctl/namespace.c
+++ b/ndctl/namespace.c
@@ -867,7 +867,7 @@ static int namespace_create(struct ndctl_region *region)
if (!ndns || is_namespace_active(ndns)) {
debug("%s: no %s namespace seed\n", devname,
ndns ? "idle" : "available");
- return -ENODEV;
+ return -EAGAIN;
}
rc = setup_namespace(region, ndns, &p);
_______________________________________________
Linux-nvdimm mailing list
Linux-nvdimm@lists.01.org
https://lists.01.org/mailman/listinfo/linux-nvdimm
next prev parent reply other threads:[~2019-07-27 21:58 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-27 21:39 [ndctl PATCH v2 00/26] Improvements for namespace creation/interrogation Dan Williams
2019-07-27 21:39 ` [ndctl PATCH v2 01/26] ndctl/dimm: Add 'flags' field to read-labels output Dan Williams
2019-08-02 18:01 ` Verma, Vishal L
2019-08-02 18:19 ` Dan Williams
2019-07-27 21:39 ` [ndctl PATCH v2 02/26] ndctl/dimm: Add --human support to read-labels Dan Williams
2019-07-27 21:39 ` [ndctl PATCH v2 03/26] ndctl/build: Drop -Wpointer-arith Dan Williams
2019-07-27 21:39 ` [ndctl PATCH v2 04/26] ndctl/namespace: Add read-infoblock command Dan Williams
2019-07-27 21:39 ` [ndctl PATCH v2 05/26] ndctl/test: Update dax-dev to handle multiple e820 ranges Dan Williams
2019-07-27 21:39 ` [ndctl PATCH v2 06/26] ndctl/test: Make dax.sh more robust vs small namespaces Dan Williams
2019-07-27 21:39 ` [ndctl PATCH v2 07/26] ndctl/namespace: Always zero info-blocks Dan Williams
2019-07-27 21:40 ` [ndctl PATCH v2 08/26] ndctl/dimm: Support small label reads/writes Dan Williams
2019-07-27 21:40 ` [ndctl PATCH v2 09/26] ndctl/dimm: Minimize data-transfer for init-labels Dan Williams
2019-07-27 21:40 ` [ndctl PATCH v2 10/26] ndctl/dimm: Add offset and size options to {read, write, zero}-labels Dan Williams
2019-07-27 21:40 ` [ndctl PATCH v2 11/26] ndctl/dimm: Limit read-labels with --index option Dan Williams
2019-07-27 21:40 ` [ndctl PATCH v2 12/26] ndctl/namespace: Minimize label data transfer for autolabel Dan Williams
2019-07-27 21:40 ` [ndctl PATCH v2 13/26] ndctl/namespace: Disable autorecovery of create-namespace failures Dan Williams
2019-07-27 21:40 ` [ndctl PATCH v2 14/26] ndctl/namespace: Handle 'create-namespace' in label-less mode Dan Williams
2019-08-21 12:56 ` Michal Suchánek
2019-08-21 18:03 ` Verma, Vishal L
2019-08-21 18:19 ` Michal Suchánek
2019-07-27 21:40 ` [ndctl PATCH v2 15/26] ndctl/dimm: Fix init-labels success reporting Dan Williams
2019-07-27 21:40 ` [ndctl PATCH v2 16/26] ndctl/test: Fix device-dax bus-model detection Dan Williams
2019-07-27 21:40 ` [ndctl PATCH v2 17/26] ndctl/test: Checkout device-mapper + dax operation Dan Williams
2019-07-27 21:40 ` [ndctl PATCH v2 18/26] ndctl/test: Exercise sub-section sized namespace creation/deletion Dan Williams
2019-07-27 21:41 ` [ndctl PATCH v2 19/26] ndctl/namespace: Kill off the legacy mode names Dan Williams
2019-07-27 21:41 ` [ndctl PATCH v2 20/26] ndctl/namespace: Introduce mode-to-name and name-to-mode helpers Dan Williams
2019-07-27 21:41 ` [ndctl PATCH v2 21/26] ndctl/namespace: Validate namespace size within validate_namespace_options() Dan Williams
2019-07-27 21:41 ` [ndctl PATCH v2 22/26] ndctl/namespace: Clarify 16M minimum size requirement Dan Williams
2019-07-27 21:41 ` [ndctl PATCH v2 23/26] ndctl/namespace: Report ENOSPC when regions are full Dan Williams
2019-07-27 21:41 ` [ndctl PATCH v2 24/26] ndctl/test: Regression test 'failed to track' Dan Williams
2019-07-27 21:41 ` Dan Williams [this message]
2019-07-27 21:41 ` [ndctl PATCH v2 26/26] ndctl/monitor: Allow monitor to be manually moved to the background Dan Williams
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=156426369414.531577.11315264374951747460.stgit@dwillia2-desk3.amr.corp.intel.com \
--to=dan.j.williams@intel.com \
--cc=linux-nvdimm@lists.01.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).