From: "Michal Suchánek" <msuchanek@suse.de>
To: Dan Williams <dan.j.williams@intel.com>
Cc: linux-nvdimm@lists.01.org
Subject: Re: [ndctl PATCH v2 14/26] ndctl/namespace: Handle 'create-namespace' in label-less mode
Date: Wed, 21 Aug 2019 14:56:05 +0200 [thread overview]
Message-ID: <20190821145605.206372a0@kitsune.suse.cz> (raw)
In-Reply-To: <156426363655.531577.4504452379578995249.stgit@dwillia2-desk3.amr.corp.intel.com>
Hello,
this patch is marked as superseded in the patchwork.
What is the intended replacement?
Thanks
Michal
On Sat, 27 Jul 2019 14:40:36 -0700
Dan Williams <dan.j.williams@intel.com> wrote:
> A common confusion with ndctl is that 'create-namespace' does not work
> in the label-less case. In the label-less case there is no capacity to
> allocate as the size if already hard-coded by the region boundary.
>
> However, users typically do something like the following in the
> label-less case:
>
> # ndctl list
> {
> "dev":"namespace1.0",
> "mode":"raw",
> "size":"127.00 GiB (136.37 GB)",
> "sector_size":512,
> "blockdev":"pmem1"
> }
>
> # ndctl destroy-namespace namespace1.0 -f
> destroyed 1 namespace
>
> # ndctl create-namespace
> failed to create namespace: Resource temporarily unavailable
>
> In other words they destroy the raw mode namespace that they don't want,
> and seek to create a new default configuration namespace. Since there is
> no "available_capacity" in the label-less case the 'create' attempt
> fails.
>
> Fix this by recognizing that the user wants a default sized namespace
> and just reconfigure the raw namespace.
>
> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
> ---
> ndctl/namespace.c | 10 +++++++---
> 1 file changed, 7 insertions(+), 3 deletions(-)
>
> diff --git a/ndctl/namespace.c b/ndctl/namespace.c
> index 58fec194ab94..e5a2b1341cdb 100644
> --- a/ndctl/namespace.c
> +++ b/ndctl/namespace.c
> @@ -837,9 +837,13 @@ static int namespace_create(struct ndctl_region *region)
> return -EAGAIN;
> }
>
> - available = ndctl_region_get_max_available_extent(region);
> - if (available == ULLONG_MAX)
> - available = ndctl_region_get_available_size(region);
> + if (ndctl_region_get_nstype(region) == ND_DEVICE_NAMESPACE_IO)
> + available = ndctl_region_get_size(region);
> + else {
> + available = ndctl_region_get_max_available_extent(region);
> + if (available == ULLONG_MAX)
> + available = ndctl_region_get_available_size(region);
> + }
> if (!available || p.size > available) {
> debug("%s: insufficient capacity size: %llx avail: %llx\n",
> devname, p.size, available);
_______________________________________________
Linux-nvdimm mailing list
Linux-nvdimm@lists.01.org
https://lists.01.org/mailman/listinfo/linux-nvdimm
next prev parent reply other threads:[~2019-08-21 12:57 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-27 21:39 [ndctl PATCH v2 00/26] Improvements for namespace creation/interrogation Dan Williams
2019-07-27 21:39 ` [ndctl PATCH v2 01/26] ndctl/dimm: Add 'flags' field to read-labels output Dan Williams
2019-08-02 18:01 ` Verma, Vishal L
2019-08-02 18:19 ` Dan Williams
2019-07-27 21:39 ` [ndctl PATCH v2 02/26] ndctl/dimm: Add --human support to read-labels Dan Williams
2019-07-27 21:39 ` [ndctl PATCH v2 03/26] ndctl/build: Drop -Wpointer-arith Dan Williams
2019-07-27 21:39 ` [ndctl PATCH v2 04/26] ndctl/namespace: Add read-infoblock command Dan Williams
2019-07-27 21:39 ` [ndctl PATCH v2 05/26] ndctl/test: Update dax-dev to handle multiple e820 ranges Dan Williams
2019-07-27 21:39 ` [ndctl PATCH v2 06/26] ndctl/test: Make dax.sh more robust vs small namespaces Dan Williams
2019-07-27 21:39 ` [ndctl PATCH v2 07/26] ndctl/namespace: Always zero info-blocks Dan Williams
2019-07-27 21:40 ` [ndctl PATCH v2 08/26] ndctl/dimm: Support small label reads/writes Dan Williams
2019-07-27 21:40 ` [ndctl PATCH v2 09/26] ndctl/dimm: Minimize data-transfer for init-labels Dan Williams
2019-07-27 21:40 ` [ndctl PATCH v2 10/26] ndctl/dimm: Add offset and size options to {read, write, zero}-labels Dan Williams
2019-07-27 21:40 ` [ndctl PATCH v2 11/26] ndctl/dimm: Limit read-labels with --index option Dan Williams
2019-07-27 21:40 ` [ndctl PATCH v2 12/26] ndctl/namespace: Minimize label data transfer for autolabel Dan Williams
2019-07-27 21:40 ` [ndctl PATCH v2 13/26] ndctl/namespace: Disable autorecovery of create-namespace failures Dan Williams
2019-07-27 21:40 ` [ndctl PATCH v2 14/26] ndctl/namespace: Handle 'create-namespace' in label-less mode Dan Williams
2019-08-21 12:56 ` Michal Suchánek [this message]
2019-08-21 18:03 ` Verma, Vishal L
2019-08-21 18:19 ` Michal Suchánek
2019-07-27 21:40 ` [ndctl PATCH v2 15/26] ndctl/dimm: Fix init-labels success reporting Dan Williams
2019-07-27 21:40 ` [ndctl PATCH v2 16/26] ndctl/test: Fix device-dax bus-model detection Dan Williams
2019-07-27 21:40 ` [ndctl PATCH v2 17/26] ndctl/test: Checkout device-mapper + dax operation Dan Williams
2019-07-27 21:40 ` [ndctl PATCH v2 18/26] ndctl/test: Exercise sub-section sized namespace creation/deletion Dan Williams
2019-07-27 21:41 ` [ndctl PATCH v2 19/26] ndctl/namespace: Kill off the legacy mode names Dan Williams
2019-07-27 21:41 ` [ndctl PATCH v2 20/26] ndctl/namespace: Introduce mode-to-name and name-to-mode helpers Dan Williams
2019-07-27 21:41 ` [ndctl PATCH v2 21/26] ndctl/namespace: Validate namespace size within validate_namespace_options() Dan Williams
2019-07-27 21:41 ` [ndctl PATCH v2 22/26] ndctl/namespace: Clarify 16M minimum size requirement Dan Williams
2019-07-27 21:41 ` [ndctl PATCH v2 23/26] ndctl/namespace: Report ENOSPC when regions are full Dan Williams
2019-07-27 21:41 ` [ndctl PATCH v2 24/26] ndctl/test: Regression test 'failed to track' Dan Williams
2019-07-27 21:41 ` [ndctl PATCH v2 25/26] ndctl/namespace: Continue region search on 'missing seed' event Dan Williams
2019-07-27 21:41 ` [ndctl PATCH v2 26/26] ndctl/monitor: Allow monitor to be manually moved to the background Dan Williams
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190821145605.206372a0@kitsune.suse.cz \
--to=msuchanek@suse.de \
--cc=dan.j.williams@intel.com \
--cc=linux-nvdimm@lists.01.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).