* [PATCH v3] mm: Fix phys_to_target_node() and memory_add_physaddr_to_nid() exports
@ 2020-11-04 7:53 Dan Williams
0 siblings, 0 replies; only message in thread
From: Dan Williams @ 2020-11-04 7:53 UTC (permalink / raw)
To: akpm
Cc: Randy Dunlap, Thomas Gleixner, kernel test robot,
Christoph Hellwig, Christoph Hellwig, Joao Martins, x86,
Tony Luck, Fenghua Yu, Michael Ellerman, Benjamin Herrenschmidt,
Paul Mackerras, linux-mm, linux-nvdimm
The core-mm has a default __weak implementation of phys_to_target_node()
to mirror the weak definition of memory_add_physaddr_to_nid(). That
symbol is exported for modules. However, while the export in
mm/memory_hotplug.c exported the symbol in the configuration cases of:
CONFIG_NUMA_KEEP_MEMINFO=y
CONFIG_MEMORY_HOTPLUG=y
...and:
CONFIG_NUMA_KEEP_MEMINFO=n
CONFIG_MEMORY_HOTPLUG=y
...it failed to export the symbol in the case of:
CONFIG_NUMA_KEEP_MEMINFO=y
CONFIG_MEMORY_HOTPLUG=n
Not only is that broken, but Christoph points out that the kernel should
not be exporting any __weak symbol, which means that
memory_add_physaddr_to_nid() example that phys_to_target_node() copied
is broken too.
Rework the definition of phys_to_target_node() and
memory_add_physaddr_to_nid() to not require weak symbols. Move to the
common arch override design-pattern of an asm header defining a symbol
to replace the default implementation.
The only common header that all memory_add_physaddr_to_nid() producing
architectures implement is asm/sparsemem.h. In fact, powerpc already
defines its memory_add_physaddr_to_nid() helper in sparsemem.h.
Double-down on that observation and define phys_to_target_node() where
necessary in asm/sparsemem.h. An alternate consideration that was
discarded was to put this override in asm/numa.h, but that entangles
with the definition of MAX_NUMNODES relative to the inclusion of
linux/nodemask.h, and requires powerpc to grow a new header.
The dependency on NUMA_KEEP_MEMINFO for DEV_DAX_HMEM_DEVICES is invalid
now that the symbol is properly exported / stubbed in all combinations
of CONFIG_NUMA_KEEP_MEMINFO and CONFIG_MEMORY_HOTPLUG.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Fixes: a035b6bf863e ("mm/memory_hotplug: introduce default phys_to_target_node() implementation")
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: x86@kernel.org
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
Changes since v2 [1]:
- Fixed build on archs that don't have asm/sparsemem.h, but do use
linux/numa.h (kbuild-robot)
- Fixed header include paths that need linux/printk.h for the
pr_info_once() in the default implementations. (kbuild-robot)
[1]: http://lore.kernel.org/r/CAPcyv4gj9ibFuBY1yt79CdKRgYAftdveXT1Ow4QvyRxri4jBRA@mail.gmail.com
arch/ia64/include/asm/sparsemem.h | 6 ++++++
arch/powerpc/include/asm/sparsemem.h | 3 ++-
arch/x86/include/asm/sparsemem.h | 10 ++++++++++
arch/x86/mm/numa.c | 2 ++
drivers/dax/Kconfig | 1 -
include/linux/memory_hotplug.h | 14 --------------
include/linux/numa.h | 30 +++++++++++++++++++++++++++++-
mm/memory_hotplug.c | 18 ------------------
8 files changed, 49 insertions(+), 35 deletions(-)
diff --git a/arch/ia64/include/asm/sparsemem.h b/arch/ia64/include/asm/sparsemem.h
index 336d0570e1fa..dd8c166ffd7b 100644
--- a/arch/ia64/include/asm/sparsemem.h
+++ b/arch/ia64/include/asm/sparsemem.h
@@ -18,4 +18,10 @@
#endif
#endif /* CONFIG_SPARSEMEM */
+
+#ifdef CONFIG_MEMORY_HOTPLUG
+int memory_add_physaddr_to_nid(u64 addr);
+#define memory_add_physaddr_to_nid memory_add_physaddr_to_nid
+#endif
+
#endif /* _ASM_IA64_SPARSEMEM_H */
diff --git a/arch/powerpc/include/asm/sparsemem.h b/arch/powerpc/include/asm/sparsemem.h
index 1e6fa371cc38..52519d2c5713 100644
--- a/arch/powerpc/include/asm/sparsemem.h
+++ b/arch/powerpc/include/asm/sparsemem.h
@@ -16,6 +16,8 @@
extern int create_section_mapping(unsigned long start, unsigned long end,
int nid, pgprot_t prot);
extern int remove_section_mapping(unsigned long start, unsigned long end);
+extern int memory_add_physaddr_to_nid(u64 start);
+#define memory_add_physaddr_to_nid memory_add_physaddr_to_nid
#ifdef CONFIG_NUMA
extern int hot_add_scn_to_nid(unsigned long scn_addr);
@@ -26,6 +28,5 @@ static inline int hot_add_scn_to_nid(unsigned long scn_addr)
}
#endif /* CONFIG_NUMA */
#endif /* CONFIG_MEMORY_HOTPLUG */
-
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_SPARSEMEM_H */
diff --git a/arch/x86/include/asm/sparsemem.h b/arch/x86/include/asm/sparsemem.h
index 6bfc878f6771..6a9ccc1b2be5 100644
--- a/arch/x86/include/asm/sparsemem.h
+++ b/arch/x86/include/asm/sparsemem.h
@@ -28,4 +28,14 @@
#endif
#endif /* CONFIG_SPARSEMEM */
+
+#ifndef __ASSEMBLY__
+#ifdef CONFIG_NUMA_KEEP_MEMINFO
+extern int phys_to_target_node(phys_addr_t start);
+#define phys_to_target_node phys_to_target_node
+extern int memory_add_physaddr_to_nid(u64 start);
+#define memory_add_physaddr_to_nid memory_add_physaddr_to_nid
+#endif
+#endif /* __ASSEMBLY__ */
+
#endif /* _ASM_X86_SPARSEMEM_H */
diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c
index 44148691d78b..5eb4dc2b97da 100644
--- a/arch/x86/mm/numa.c
+++ b/arch/x86/mm/numa.c
@@ -938,6 +938,7 @@ int phys_to_target_node(phys_addr_t start)
return meminfo_to_nid(&numa_reserved_meminfo, start);
}
+EXPORT_SYMBOL_GPL(phys_to_target_node);
int memory_add_physaddr_to_nid(u64 start)
{
@@ -947,4 +948,5 @@ int memory_add_physaddr_to_nid(u64 start)
nid = numa_meminfo.blk[0].nid;
return nid;
}
+EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid);
#endif
diff --git a/drivers/dax/Kconfig b/drivers/dax/Kconfig
index 567428e10b7b..d2834c2cfa10 100644
--- a/drivers/dax/Kconfig
+++ b/drivers/dax/Kconfig
@@ -50,7 +50,6 @@ config DEV_DAX_HMEM
Say M if unsure.
config DEV_DAX_HMEM_DEVICES
- depends on NUMA_KEEP_MEMINFO # for phys_to_target_node()
depends on DEV_DAX_HMEM && DAX=y
def_bool y
diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h
index d65c6fdc5cfc..551093b74596 100644
--- a/include/linux/memory_hotplug.h
+++ b/include/linux/memory_hotplug.h
@@ -281,20 +281,6 @@ static inline bool movable_node_is_enabled(void)
}
#endif /* ! CONFIG_MEMORY_HOTPLUG */
-#ifdef CONFIG_NUMA
-extern int memory_add_physaddr_to_nid(u64 start);
-extern int phys_to_target_node(u64 start);
-#else
-static inline int memory_add_physaddr_to_nid(u64 start)
-{
- return 0;
-}
-static inline int phys_to_target_node(u64 start)
-{
- return 0;
-}
-#endif
-
#if defined(CONFIG_MEMORY_HOTPLUG) || defined(CONFIG_DEFERRED_STRUCT_PAGE_INIT)
/*
* pgdat resizing functions
diff --git a/include/linux/numa.h b/include/linux/numa.h
index 8cb33ccfb671..cb44cfe2b725 100644
--- a/include/linux/numa.h
+++ b/include/linux/numa.h
@@ -21,13 +21,41 @@
#endif
#ifdef CONFIG_NUMA
+#include <linux/printk.h>
+#include <asm/sparsemem.h>
+
/* Generic implementation available */
int numa_map_to_online_node(int node);
-#else
+
+#ifndef memory_add_physaddr_to_nid
+static inline int memory_add_physaddr_to_nid(u64 start)
+{
+ pr_info_once("Unknown online node for memory at 0x%llx, assuming node 0\n",
+ start);
+ return 0;
+}
+#endif
+#ifndef phys_to_target_node
+static inline int phys_to_target_node(u64 start)
+{
+ pr_info_once("Unknown target node for memory at 0x%llx, assuming node 0\n",
+ start);
+ return 0;
+}
+#endif
+#else /* !CONFIG_NUMA */
static inline int numa_map_to_online_node(int node)
{
return NUMA_NO_NODE;
}
+static inline int memory_add_physaddr_to_nid(u64 start)
+{
+ return 0;
+}
+static inline int phys_to_target_node(u64 start)
+{
+ return 0;
+}
#endif
#endif /* _LINUX_NUMA_H */
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index b44d4c7ba73b..63b2e46b6555 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -350,24 +350,6 @@ int __ref __add_pages(int nid, unsigned long pfn, unsigned long nr_pages,
return err;
}
-#ifdef CONFIG_NUMA
-int __weak memory_add_physaddr_to_nid(u64 start)
-{
- pr_info_once("Unknown online node for memory at 0x%llx, assuming node 0\n",
- start);
- return 0;
-}
-EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid);
-
-int __weak phys_to_target_node(u64 start)
-{
- pr_info_once("Unknown target node for memory at 0x%llx, assuming node 0\n",
- start);
- return 0;
-}
-EXPORT_SYMBOL_GPL(phys_to_target_node);
-#endif
-
/* find the smallest valid pfn in the range [start_pfn, end_pfn) */
static unsigned long find_smallest_section_pfn(int nid, struct zone *zone,
unsigned long start_pfn,
_______________________________________________
Linux-nvdimm mailing list -- linux-nvdimm@lists.01.org
To unsubscribe send an email to linux-nvdimm-leave@lists.01.org
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2020-11-04 7:53 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-11-04 7:53 [PATCH v3] mm: Fix phys_to_target_node() and memory_add_physaddr_to_nid() exports Dan Williams
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).