Openbmc archive at lore.kernel.org
 help / color / Atom feed
* [PATCH linux dev-5.8] ARM: dts: aspeed: g220a: Add some gpios
@ 2020-10-14  8:30 John Wang
  0 siblings, 0 replies; only message in thread
From: John Wang @ 2020-10-14  8:30 UTC (permalink / raw)
  To: openbmc, joel, yulei.sh, xuxiaohan

Add GPIO STRAP_BMC_BATTERY_GPIOS5, which is used for battery
adc sensor.

Change the INTRUDER_N to CHASSIS_INTRUSION, to make it
more meaningful

Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com>
---
 arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts b/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts
index 7eaf3a4e20db..89916a2eec18 100644
--- a/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts
@@ -316,11 +316,11 @@ &gpio {
 	/*N0-N7*/	"","","","","","","","",
 	/*O0-O7*/	"","","","","","","","",
 	/*P0-P7*/	"","","","","","","","",
-	/*Q0-Q7*/	"","","","","","","FM_PCH_THERMTRIP_N","INTRUDER_N",
+	/*Q0-Q7*/	"","","","","","","FM_PCH_THERMTRIP_N","CHASSIS_INTRUSION",
 	/*R0-R7*/	"","PVCCIN_CPU1_SMBALERT_N","BMC_PREQ_R_N","FAULT_P12V_PCIE_RISER_N",
 			"ALT_P12V_PCIE_RISER_N","BURN_BOARD_N","PVCCIN_CPU0_SMBALERT_N","",
 	/*S0-S7*/	"BMC_PRDY_N","SIO_POWER_GOOD","FM_BMC_PWR_DEBUG_R_N",
-			"FM_BMC_XDP_DEBUG_EN","","","","",
+			"FM_BMC_XDP_DEBUG_EN","","STRAP_BMC_BATTERY_GPIOS5","","",
 	/*T0-T7*/	"","","","","","","","",
 	/*U0-U7*/	"","","","","","","","",
 	/*V0-V7*/	"","","","","","","","",
-- 
2.25.1


^ permalink raw reply	[flat|nested] only message in thread

only message in thread, back to index

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-10-14  8:30 [PATCH linux dev-5.8] ARM: dts: aspeed: g220a: Add some gpios John Wang

Openbmc archive at lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/openbmc/0 openbmc/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 openbmc openbmc/ https://lore.kernel.org/openbmc \
		openbmc@lists.ozlabs.org openbmc@ozlabs.org
	public-inbox-index openbmc

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.ozlabs.lists.openbmc


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git