openbmc.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
* [PATCH 00/19] ipmi: Allow raw access to KCS devices
@ 2021-02-19 14:25 Andrew Jeffery
  2021-02-19 14:25 ` [PATCH 01/19] dt-bindings: aspeed-lpc: Remove LPC partitioning Andrew Jeffery
                   ` (18 more replies)
  0 siblings, 19 replies; 28+ messages in thread
From: Andrew Jeffery @ 2021-02-19 14:25 UTC (permalink / raw)
  To: openipmi-developer, openbmc, minyard
  Cc: devicetree, tmaimon77, linux-aspeed, linux-gpio, avifishman70,
	venture, linus.walleij, linux-kernel, tali.perry1, robh+dt,
	lee.jones, chiawei_wang, linux-arm-kernel, benjaminfair

Hello,

This series is a bit of a mix of things, but its primary purpose is to
expose BMC KCS IPMI devices to userspace in a way that enables userspace
to talk to host firmware using protocols that are not IPMI.  The new
chardev implementation exposes the Input Data Register (IDR), Output
Data Register (ODR) and Status Register (STR) via read() and write(),
and implements poll() for event monitoring.

The existing /dev/ipmi-kcs* chardev interface exposes the KCS devices in
a way which encoded the IPMI protocol in its behaviour. However, as
LPC[0] KCS devices give us bi-directional interrupts between the host
and a BMC with both a data and status byte, they are useful for purposes
beyond IPMI.

As a concrete example, libmctp[1] implements a vendor-defined
host-interface MCTP[2] binding using a combination of LPC Firmware
cycles for bulk data transfer and a KCS device via LPC IO cycles for
out-of-band protocol control messages[3]. This gives a throughput
improvement over the standard KCS binding[4] while continuing to exploit
the ease of setup of the LPC bus for early boot firmware on the host
processor.

The series takes a bit of a winding path to achieve its aim:

1. It begins with patches 1-5 put together by Chia-Wei, which I've
rebased on v5.11. These fix the ASPEED LPC bindings and other non-KCS
LPC-related ASPEED device drivers in a way that enables the SerIRQ
patches at the end of the series. With Joel's review I'm hoping these 5
can go through the aspeed tree, and that the rest can go through the
IPMI tree.

2. Next, patches 6-13 fairly heavily refactor the KCS support in the
IPMI part of the tree, re-architecting things such that it's possible to
support multiple chardev implementations sitting on top of the ASPEED
and Nuvoton device drivers. However, the KCS code didn't really have
great separation of concerns as it stood, so even if we disregard the
multiple-chardev support I think the cleanups are worthwhile.

3. Patch 14 adds some interrupt management capabilities to the KCS
device drivers in preparation for patch 15, which introduces the new
"raw" KCS device interface. I'm not stoked about the device name/path,
so if people are looking to bikeshed something then feel free to lay
into that.

4. The remaining patches switch the ASPEED KCS devicetree binding to
dt-schema, add a new interrupt property to describe the SerIRQ behaviour
of the device and finally clean up Serial IRQ support in the ASPEED KCS
driver.

Rob: The dt-binding patches still come before the relevant driver
changes, I tried to keep the two close together in the series, hence the
bindings changes not being patches 1 and 2.

I've exercised the series under qemu with the rainier-bmc machine plus
some preliminary KCS support[5]. I've also substituted this series in
place of a hacky out-of-tree driver that we've been using for the
libmctp stack and successfully booted the host processor under our
internal full-platform simulation tools for a Rainier system.

Note that this work touches the Nuvoton driver as well as ASPEED's, but
I don't have the capability to test those changes or the IPMI chardev
path. Tested-by tags would be much appreciated if you can exercise one
or both.

Please review!

Andrew

[0] https://www.intel.com/content/dam/www/program/design/us/en/documents/low-pin-count-interface-specification.pdf
[1] https://github.com/openbmc/libmctp/
[2] https://www.dmtf.org/sites/default/files/standards/documents/DSP0236_1.3.1.pdf
[3] https://github.com/openbmc/libmctp/blob/master/docs/bindings/vendor-astlpc.md
[4] https://www.dmtf.org/sites/default/files/standards/documents/DSP0254_1.0.0.pdf
[5] https://github.com/amboar/qemu/tree/kcs

Andrew Jeffery (14):
  ipmi: kcs_bmc_aspeed: Use of match data to extract KCS properties
  ipmi: kcs_bmc: Make status update atomic
  ipmi: kcs_bmc: Rename {read,write}_{status,data}() functions
  ipmi: kcs_bmc: Split out kcs_bmc_cdev_ipmi
  ipmi: kcs_bmc: Turn the driver data-structures inside-out
  ipmi: kcs_bmc: Split headers into device and client
  ipmi: kcs_bmc: Strip private client data from struct kcs_bmc
  ipmi: kcs_bmc: Decouple the IPMI chardev from the core
  ipmi: kcs_bmc: Allow clients to control KCS IRQ state
  ipmi: kcs_bmc: Add a "raw" character device interface
  dt-bindings: ipmi: Convert ASPEED KCS binding to schema
  dt-bindings: ipmi: Add optional SerIRQ property to ASPEED KCS devices
  ipmi: kcs_bmc_aspeed: Implement KCS SerIRQ configuration
  ipmi: kcs_bmc_aspeed: Fix IBFIE typo from datasheet

Chia-Wei, Wang (5):
  dt-bindings: aspeed-lpc: Remove LPC partitioning
  ARM: dts: Remove LPC BMC and Host partitions
  ipmi: kcs: aspeed: Adapt to new LPC DTS layout
  pinctrl: aspeed-g5: Adapt to new LPC device tree layout
  soc: aspeed: Adapt to new LPC device tree layout

 Documentation/ABI/testing/dev-raw-kcs         |  25 +
 .../bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml | 106 ++++
 .../bindings/ipmi/aspeed-kcs-bmc.txt          |  33 -
 .../devicetree/bindings/mfd/aspeed-lpc.txt    | 100 +--
 arch/arm/boot/dts/aspeed-g4.dtsi              |  68 +--
 arch/arm/boot/dts/aspeed-g5.dtsi              | 119 ++--
 arch/arm/boot/dts/aspeed-g6.dtsi              | 121 ++--
 drivers/char/ipmi/Kconfig                     |  30 +
 drivers/char/ipmi/Makefile                    |   2 +
 drivers/char/ipmi/kcs_bmc.c                   | 532 +++++-----------
 drivers/char/ipmi/kcs_bmc.h                   |  94 +--
 drivers/char/ipmi/kcs_bmc_aspeed.c            | 536 ++++++++++------
 drivers/char/ipmi/kcs_bmc_cdev_ipmi.c         | 570 ++++++++++++++++++
 drivers/char/ipmi/kcs_bmc_cdev_raw.c          | 442 ++++++++++++++
 drivers/char/ipmi/kcs_bmc_client.h            |  47 ++
 drivers/char/ipmi/kcs_bmc_device.h            |  20 +
 drivers/char/ipmi/kcs_bmc_npcm7xx.c           |  98 ++-
 drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c    |  17 +-
 drivers/soc/aspeed/aspeed-lpc-ctrl.c          |  20 +-
 drivers/soc/aspeed/aspeed-lpc-snoop.c         |  23 +-
 20 files changed, 2021 insertions(+), 982 deletions(-)
 create mode 100644 Documentation/ABI/testing/dev-raw-kcs
 create mode 100644 Documentation/devicetree/bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml
 delete mode 100644 Documentation/devicetree/bindings/ipmi/aspeed-kcs-bmc.txt
 create mode 100644 drivers/char/ipmi/kcs_bmc_cdev_ipmi.c
 create mode 100644 drivers/char/ipmi/kcs_bmc_cdev_raw.c
 create mode 100644 drivers/char/ipmi/kcs_bmc_client.h
 create mode 100644 drivers/char/ipmi/kcs_bmc_device.h

-- 
2.27.0


^ permalink raw reply	[flat|nested] 28+ messages in thread

end of thread, other threads:[~2021-03-09  2:46 UTC | newest]

Thread overview: 28+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-02-19 14:25 [PATCH 00/19] ipmi: Allow raw access to KCS devices Andrew Jeffery
2021-02-19 14:25 ` [PATCH 01/19] dt-bindings: aspeed-lpc: Remove LPC partitioning Andrew Jeffery
2021-02-22  9:04   ` Lee Jones
2021-02-19 14:25 ` [PATCH 02/19] ARM: dts: Remove LPC BMC and Host partitions Andrew Jeffery
2021-02-19 14:25 ` [PATCH 03/19] ipmi: kcs: aspeed: Adapt to new LPC DTS layout Andrew Jeffery
2021-02-19 14:25 ` [PATCH 04/19] pinctrl: aspeed-g5: Adapt to new LPC device tree layout Andrew Jeffery
2021-02-19 14:25 ` [PATCH 05/19] soc: aspeed: " Andrew Jeffery
2021-02-19 14:25 ` [PATCH 06/19] ipmi: kcs_bmc_aspeed: Use of match data to extract KCS properties Andrew Jeffery
2021-02-19 14:25 ` [PATCH 07/19] ipmi: kcs_bmc: Make status update atomic Andrew Jeffery
2021-02-19 14:25 ` [PATCH 08/19] ipmi: kcs_bmc: Rename {read, write}_{status, data}() functions Andrew Jeffery
2021-02-19 14:25 ` [PATCH 09/19] ipmi: kcs_bmc: Split out kcs_bmc_cdev_ipmi Andrew Jeffery
2021-02-19 14:25 ` [PATCH 10/19] ipmi: kcs_bmc: Turn the driver data-structures inside-out Andrew Jeffery
2021-02-19 14:25 ` [PATCH 11/19] ipmi: kcs_bmc: Split headers into device and client Andrew Jeffery
2021-02-19 14:25 ` [PATCH 12/19] ipmi: kcs_bmc: Strip private client data from struct kcs_bmc Andrew Jeffery
2021-02-21 13:55   ` kernel test robot
2021-02-19 14:25 ` [PATCH 13/19] ipmi: kcs_bmc: Decouple the IPMI chardev from the core Andrew Jeffery
2021-02-19 14:25 ` [PATCH 14/19] ipmi: kcs_bmc: Allow clients to control KCS IRQ state Andrew Jeffery
2021-02-19 14:25 ` [PATCH 15/19] ipmi: kcs_bmc: Add a "raw" character device interface Andrew Jeffery
2021-02-21 13:54   ` kernel test robot
2021-02-21 15:36   ` kernel test robot
2021-02-19 14:25 ` [PATCH 16/19] dt-bindings: ipmi: Convert ASPEED KCS binding to schema Andrew Jeffery
2021-03-05 23:07   ` Rob Herring
2021-03-09  2:45     ` Andrew Jeffery
2021-02-19 14:25 ` [PATCH 17/19] dt-bindings: ipmi: Add optional SerIRQ property to ASPEED KCS devices Andrew Jeffery
2021-03-05 23:09   ` Rob Herring
2021-03-09  2:44     ` Andrew Jeffery
2021-02-19 14:25 ` [PATCH 18/19] ipmi: kcs_bmc_aspeed: Implement KCS SerIRQ configuration Andrew Jeffery
2021-02-19 14:25 ` [PATCH 19/19] ipmi: kcs_bmc_aspeed: Fix IBFIE typo from datasheet Andrew Jeffery

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).