* [PATCH v2] media: aspeed: move err-handling together to the bottom
@ 2021-12-06 0:48 Jammy Huang
2021-12-14 14:53 ` Mauro Carvalho Chehab
0 siblings, 1 reply; 5+ messages in thread
From: Jammy Huang @ 2021-12-06 0:48 UTC (permalink / raw)
To: hverkuil-cisco, sakari.ailus, gregkh, laurent.pinchart, eajames,
mchehab, joel, andrew, linux-media, openbmc, linux-arm-kernel,
linux-aspeed, linux-kernel
refine aspeed_video_setup_video() flow.
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
---
v2:
- remove change-id in comment
---
drivers/media/platform/aspeed-video.c | 24 +++++++++++-------------
1 file changed, 11 insertions(+), 13 deletions(-)
diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c
index fea5e4d0927e..f5c40d6b4ece 100644
--- a/drivers/media/platform/aspeed-video.c
+++ b/drivers/media/platform/aspeed-video.c
@@ -1641,11 +1641,8 @@ static int aspeed_video_setup_video(struct aspeed_video *video)
rc = video->ctrl_handler.error;
if (rc) {
- v4l2_ctrl_handler_free(&video->ctrl_handler);
- v4l2_device_unregister(v4l2_dev);
-
dev_err(video->dev, "Failed to init controls: %d\n", rc);
- return rc;
+ goto err_ctrl_init;
}
v4l2_dev->ctrl_handler = &video->ctrl_handler;
@@ -1663,11 +1660,8 @@ static int aspeed_video_setup_video(struct aspeed_video *video)
rc = vb2_queue_init(vbq);
if (rc) {
- v4l2_ctrl_handler_free(&video->ctrl_handler);
- v4l2_device_unregister(v4l2_dev);
-
dev_err(video->dev, "Failed to init vb2 queue\n");
- return rc;
+ goto err_vb2_init;
}
vdev->queue = vbq;
@@ -1685,15 +1679,19 @@ static int aspeed_video_setup_video(struct aspeed_video *video)
video_set_drvdata(vdev, video);
rc = video_register_device(vdev, VFL_TYPE_GRABBER, 0);
if (rc) {
- vb2_queue_release(vbq);
- v4l2_ctrl_handler_free(&video->ctrl_handler);
- v4l2_device_unregister(v4l2_dev);
-
dev_err(video->dev, "Failed to register video device\n");
- return rc;
+ goto err_video_reg;
}
return 0;
+
+err_video_reg:
+ vb2_queue_release(vbq);
+err_vb2_init:
+err_ctrl_init:
+ v4l2_ctrl_handler_free(&video->ctrl_handler);
+ v4l2_device_unregister(v4l2_dev);
+ return rc;
}
static int aspeed_video_init(struct aspeed_video *video)
--
2.25.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v2] media: aspeed: move err-handling together to the bottom
2021-12-06 0:48 [PATCH v2] media: aspeed: move err-handling together to the bottom Jammy Huang
@ 2021-12-14 14:53 ` Mauro Carvalho Chehab
2021-12-14 18:32 ` Sakari Ailus
2021-12-15 1:59 ` Jammy Huang
0 siblings, 2 replies; 5+ messages in thread
From: Mauro Carvalho Chehab @ 2021-12-14 14:53 UTC (permalink / raw)
To: Jammy Huang
Cc: linux-aspeed, andrew, gregkh, openbmc, eajames, linux-kernel,
laurent.pinchart, sakari.ailus, hverkuil-cisco, linux-media,
linux-arm-kernel
Em Mon, 6 Dec 2021 08:48:11 +0800
Jammy Huang <jammy_huang@aspeedtech.com> escreveu:
> refine aspeed_video_setup_video() flow.
Why? It makes no difference where the error handling code is. Let's
keep it as preferred by the driver's author ;-)
Regards,
Mauro
>
> Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
> ---
> v2:
> - remove change-id in comment
> ---
> drivers/media/platform/aspeed-video.c | 24 +++++++++++-------------
> 1 file changed, 11 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c
> index fea5e4d0927e..f5c40d6b4ece 100644
> --- a/drivers/media/platform/aspeed-video.c
> +++ b/drivers/media/platform/aspeed-video.c
> @@ -1641,11 +1641,8 @@ static int aspeed_video_setup_video(struct aspeed_video *video)
>
> rc = video->ctrl_handler.error;
> if (rc) {
> - v4l2_ctrl_handler_free(&video->ctrl_handler);
> - v4l2_device_unregister(v4l2_dev);
> -
> dev_err(video->dev, "Failed to init controls: %d\n", rc);
> - return rc;
> + goto err_ctrl_init;
> }
>
> v4l2_dev->ctrl_handler = &video->ctrl_handler;
> @@ -1663,11 +1660,8 @@ static int aspeed_video_setup_video(struct aspeed_video *video)
>
> rc = vb2_queue_init(vbq);
> if (rc) {
> - v4l2_ctrl_handler_free(&video->ctrl_handler);
> - v4l2_device_unregister(v4l2_dev);
> -
> dev_err(video->dev, "Failed to init vb2 queue\n");
> - return rc;
> + goto err_vb2_init;
> }
>
> vdev->queue = vbq;
> @@ -1685,15 +1679,19 @@ static int aspeed_video_setup_video(struct aspeed_video *video)
> video_set_drvdata(vdev, video);
> rc = video_register_device(vdev, VFL_TYPE_GRABBER, 0);
> if (rc) {
> - vb2_queue_release(vbq);
> - v4l2_ctrl_handler_free(&video->ctrl_handler);
> - v4l2_device_unregister(v4l2_dev);
> -
> dev_err(video->dev, "Failed to register video device\n");
> - return rc;
> + goto err_video_reg;
> }
>
> return 0;
> +
> +err_video_reg:
> + vb2_queue_release(vbq);
> +err_vb2_init:
> +err_ctrl_init:
> + v4l2_ctrl_handler_free(&video->ctrl_handler);
> + v4l2_device_unregister(v4l2_dev);
> + return rc;
> }
>
> static int aspeed_video_init(struct aspeed_video *video)
Thanks,
Mauro
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v2] media: aspeed: move err-handling together to the bottom
2021-12-14 14:53 ` Mauro Carvalho Chehab
@ 2021-12-14 18:32 ` Sakari Ailus
2021-12-15 1:59 ` Jammy Huang
2021-12-15 1:59 ` Jammy Huang
1 sibling, 1 reply; 5+ messages in thread
From: Sakari Ailus @ 2021-12-14 18:32 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: Jammy Huang, linux-aspeed, andrew, gregkh, openbmc, eajames,
linux-kernel, hverkuil-cisco, linux-media, linux-arm-kernel,
laurent.pinchart
Hi Mauro,
On Tue, Dec 14, 2021 at 03:53:00PM +0100, Mauro Carvalho Chehab wrote:
> Em Mon, 6 Dec 2021 08:48:11 +0800
> Jammy Huang <jammy_huang@aspeedtech.com> escreveu:
>
> > refine aspeed_video_setup_video() flow.
>
> Why? It makes no difference where the error handling code is. Let's
> keep it as preferred by the driver's author ;-)
Doing error handling can be done in different ways of course, but I think
it's easier to see it's right as it's done by this patch. Of course the
original author's --- like anyone else's --- review wouldn't hurt. But I
see he hasn't reviewed other recent patches to the driver either.
A better description would be nice though, including capital letter
beginning a sentence.
>
> Regards,
> Mauro
>
> >
> > Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
> > ---
> > v2:
> > - remove change-id in comment
> > ---
> > drivers/media/platform/aspeed-video.c | 24 +++++++++++-------------
> > 1 file changed, 11 insertions(+), 13 deletions(-)
> >
> > diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c
> > index fea5e4d0927e..f5c40d6b4ece 100644
> > --- a/drivers/media/platform/aspeed-video.c
> > +++ b/drivers/media/platform/aspeed-video.c
> > @@ -1641,11 +1641,8 @@ static int aspeed_video_setup_video(struct aspeed_video *video)
> >
> > rc = video->ctrl_handler.error;
> > if (rc) {
> > - v4l2_ctrl_handler_free(&video->ctrl_handler);
> > - v4l2_device_unregister(v4l2_dev);
> > -
> > dev_err(video->dev, "Failed to init controls: %d\n", rc);
> > - return rc;
> > + goto err_ctrl_init;
> > }
> >
> > v4l2_dev->ctrl_handler = &video->ctrl_handler;
> > @@ -1663,11 +1660,8 @@ static int aspeed_video_setup_video(struct aspeed_video *video)
> >
> > rc = vb2_queue_init(vbq);
> > if (rc) {
> > - v4l2_ctrl_handler_free(&video->ctrl_handler);
> > - v4l2_device_unregister(v4l2_dev);
> > -
> > dev_err(video->dev, "Failed to init vb2 queue\n");
> > - return rc;
> > + goto err_vb2_init;
> > }
> >
> > vdev->queue = vbq;
> > @@ -1685,15 +1679,19 @@ static int aspeed_video_setup_video(struct aspeed_video *video)
> > video_set_drvdata(vdev, video);
> > rc = video_register_device(vdev, VFL_TYPE_GRABBER, 0);
> > if (rc) {
> > - vb2_queue_release(vbq);
> > - v4l2_ctrl_handler_free(&video->ctrl_handler);
> > - v4l2_device_unregister(v4l2_dev);
> > -
> > dev_err(video->dev, "Failed to register video device\n");
> > - return rc;
> > + goto err_video_reg;
> > }
> >
> > return 0;
> > +
> > +err_video_reg:
> > + vb2_queue_release(vbq);
> > +err_vb2_init:
> > +err_ctrl_init:
> > + v4l2_ctrl_handler_free(&video->ctrl_handler);
> > + v4l2_device_unregister(v4l2_dev);
> > + return rc;
> > }
> >
> > static int aspeed_video_init(struct aspeed_video *video)
>
>
>
> Thanks,
> Mauro
--
Sakari Ailus
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v2] media: aspeed: move err-handling together to the bottom
2021-12-14 14:53 ` Mauro Carvalho Chehab
2021-12-14 18:32 ` Sakari Ailus
@ 2021-12-15 1:59 ` Jammy Huang
1 sibling, 0 replies; 5+ messages in thread
From: Jammy Huang @ 2021-12-15 1:59 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: linux-aspeed, andrew, gregkh, openbmc, eajames, linux-kernel,
laurent.pinchart, sakari.ailus, hverkuil-cisco, linux-media,
linux-arm-kernel
Hi Mauro,
Because I saw similar error-handling in aspeed_video_init(), I just want
to make it clear and identical.
It's ok if not applied. Just style problem, as you said.
On 2021/12/14 下午 10:53, Mauro Carvalho Chehab wrote:
> Em Mon, 6 Dec 2021 08:48:11 +0800
> Jammy Huang <jammy_huang@aspeedtech.com> escreveu:
>
>> refine aspeed_video_setup_video() flow.
> Why? It makes no difference where the error handling code is. Let's
> keep it as preferred by the driver's author ;-)
>
> Regards,
> Mauro
>
>> Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
>> ---
>> v2:
>> - remove change-id in comment
>> ---
>> drivers/media/platform/aspeed-video.c | 24 +++++++++++-------------
>> 1 file changed, 11 insertions(+), 13 deletions(-)
>>
>> diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c
>> index fea5e4d0927e..f5c40d6b4ece 100644
>> --- a/drivers/media/platform/aspeed-video.c
>> +++ b/drivers/media/platform/aspeed-video.c
>> @@ -1641,11 +1641,8 @@ static int aspeed_video_setup_video(struct aspeed_video *video)
>>
>> rc = video->ctrl_handler.error;
>> if (rc) {
>> - v4l2_ctrl_handler_free(&video->ctrl_handler);
>> - v4l2_device_unregister(v4l2_dev);
>> -
>> dev_err(video->dev, "Failed to init controls: %d\n", rc);
>> - return rc;
>> + goto err_ctrl_init;
>> }
>>
>> v4l2_dev->ctrl_handler = &video->ctrl_handler;
>> @@ -1663,11 +1660,8 @@ static int aspeed_video_setup_video(struct aspeed_video *video)
>>
>> rc = vb2_queue_init(vbq);
>> if (rc) {
>> - v4l2_ctrl_handler_free(&video->ctrl_handler);
>> - v4l2_device_unregister(v4l2_dev);
>> -
>> dev_err(video->dev, "Failed to init vb2 queue\n");
>> - return rc;
>> + goto err_vb2_init;
>> }
>>
>> vdev->queue = vbq;
>> @@ -1685,15 +1679,19 @@ static int aspeed_video_setup_video(struct aspeed_video *video)
>> video_set_drvdata(vdev, video);
>> rc = video_register_device(vdev, VFL_TYPE_GRABBER, 0);
>> if (rc) {
>> - vb2_queue_release(vbq);
>> - v4l2_ctrl_handler_free(&video->ctrl_handler);
>> - v4l2_device_unregister(v4l2_dev);
>> -
>> dev_err(video->dev, "Failed to register video device\n");
>> - return rc;
>> + goto err_video_reg;
>> }
>>
>> return 0;
>> +
>> +err_video_reg:
>> + vb2_queue_release(vbq);
>> +err_vb2_init:
>> +err_ctrl_init:
>> + v4l2_ctrl_handler_free(&video->ctrl_handler);
>> + v4l2_device_unregister(v4l2_dev);
>> + return rc;
>> }
>>
>> static int aspeed_video_init(struct aspeed_video *video)
>
>
> Thanks,
> Mauro
--
Best Regards
Jammy
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v2] media: aspeed: move err-handling together to the bottom
2021-12-14 18:32 ` Sakari Ailus
@ 2021-12-15 1:59 ` Jammy Huang
0 siblings, 0 replies; 5+ messages in thread
From: Jammy Huang @ 2021-12-15 1:59 UTC (permalink / raw)
To: Sakari Ailus, Mauro Carvalho Chehab
Cc: linux-aspeed, andrew, gregkh, openbmc, eajames, linux-kernel,
laurent.pinchart, hverkuil-cisco, linux-arm-kernel, linux-media
Hi Sakari,
Thanks for your review.
On 2021/12/15 上午 02:32, Sakari Ailus wrote:
> Hi Mauro,
>
> On Tue, Dec 14, 2021 at 03:53:00PM +0100, Mauro Carvalho Chehab wrote:
>> Em Mon, 6 Dec 2021 08:48:11 +0800
>> Jammy Huang <jammy_huang@aspeedtech.com> escreveu:
>>
>>> refine aspeed_video_setup_video() flow.
>> Why? It makes no difference where the error handling code is. Let's
>> keep it as preferred by the driver's author ;-)
> Doing error handling can be done in different ways of course, but I think
> it's easier to see it's right as it's done by this patch. Of course the
> original author's --- like anyone else's --- review wouldn't hurt. But I
> see he hasn't reviewed other recent patches to the driver either.
>
> A better description would be nice though, including capital letter
> beginning a sentence.
>
>> Regards,
>> Mauro
>>
>>> Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
>>> ---
>>> v2:
>>> - remove change-id in comment
>>> ---
>>> drivers/media/platform/aspeed-video.c | 24 +++++++++++-------------
>>> 1 file changed, 11 insertions(+), 13 deletions(-)
>>>
>>> diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c
>>> index fea5e4d0927e..f5c40d6b4ece 100644
>>> --- a/drivers/media/platform/aspeed-video.c
>>> +++ b/drivers/media/platform/aspeed-video.c
>>> @@ -1641,11 +1641,8 @@ static int aspeed_video_setup_video(struct aspeed_video *video)
>>>
>>> rc = video->ctrl_handler.error;
>>> if (rc) {
>>> - v4l2_ctrl_handler_free(&video->ctrl_handler);
>>> - v4l2_device_unregister(v4l2_dev);
>>> -
>>> dev_err(video->dev, "Failed to init controls: %d\n", rc);
>>> - return rc;
>>> + goto err_ctrl_init;
>>> }
>>>
>>> v4l2_dev->ctrl_handler = &video->ctrl_handler;
>>> @@ -1663,11 +1660,8 @@ static int aspeed_video_setup_video(struct aspeed_video *video)
>>>
>>> rc = vb2_queue_init(vbq);
>>> if (rc) {
>>> - v4l2_ctrl_handler_free(&video->ctrl_handler);
>>> - v4l2_device_unregister(v4l2_dev);
>>> -
>>> dev_err(video->dev, "Failed to init vb2 queue\n");
>>> - return rc;
>>> + goto err_vb2_init;
>>> }
>>>
>>> vdev->queue = vbq;
>>> @@ -1685,15 +1679,19 @@ static int aspeed_video_setup_video(struct aspeed_video *video)
>>> video_set_drvdata(vdev, video);
>>> rc = video_register_device(vdev, VFL_TYPE_GRABBER, 0);
>>> if (rc) {
>>> - vb2_queue_release(vbq);
>>> - v4l2_ctrl_handler_free(&video->ctrl_handler);
>>> - v4l2_device_unregister(v4l2_dev);
>>> -
>>> dev_err(video->dev, "Failed to register video device\n");
>>> - return rc;
>>> + goto err_video_reg;
>>> }
>>>
>>> return 0;
>>> +
>>> +err_video_reg:
>>> + vb2_queue_release(vbq);
>>> +err_vb2_init:
>>> +err_ctrl_init:
>>> + v4l2_ctrl_handler_free(&video->ctrl_handler);
>>> + v4l2_device_unregister(v4l2_dev);
>>> + return rc;
>>> }
>>>
>>> static int aspeed_video_init(struct aspeed_video *video)
>>
>>
>> Thanks,
>> Mauro
--
Best Regards
Jammy
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2021-12-15 2:01 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-12-06 0:48 [PATCH v2] media: aspeed: move err-handling together to the bottom Jammy Huang
2021-12-14 14:53 ` Mauro Carvalho Chehab
2021-12-14 18:32 ` Sakari Ailus
2021-12-15 1:59 ` Jammy Huang
2021-12-15 1:59 ` Jammy Huang
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).