From: 吳秉昌 <wh800805@gmail.com>
To: openbmc@lists.ozlabs.org
Subject: Ipmitool command & entity-manager question
Date: Thu, 30 Sep 2021 17:07:20 +0800 [thread overview]
Message-ID: <42F9352C-E5A9-4A02-B877-95E8419EB3BE@gmail.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 9340 bytes --]
Hi all
I add the sensor in entity-manager config like below
{
"Index": 2,
"Name": "MB_VMEM",
"PowerState": "On",
"ScaleFactor": 1,
"Thresholds": [
{
"Direction": "greater than",
"Name": "upper critical",
"Severity": 1,
"Value": 1.32
},
{
"Direction": "greater than",
"Name": "upper non critical",
"Severity": 0,
"Value": 1.26
},
{
"Direction": "less than",
"Name": "lower non critical",
"Severity": 0,
"Value": 1.14
},
{
"Direction": "less than",
"Name": "lower critical",
"Severity": 1,
"Value": 1.08
}
],
"Type": "ADC"
},
{
"Index": 3,
"Name": "MB_P12V",
"PowerState": "On",
"ScaleFactor": 0.23,
"Thresholds": [
{
"Direction": "greater than",
"Name": "upper critical",
"Severity": 1,
"Value": 13.23
},
{
"Direction": "greater than",
"Name": "upper non critical",
"Severity": 0,
"Value": 12.6
},
{
"Direction": "less than",
"Name": "lower non critical",
"Severity": 0,
"Value": 11.4
},
{
"Direction": "less than",
"Name": "lower critical",
"Severity": 1,
"Value": 10.77
}
],
"Type": "ADC"
},
{
"Index": 4,
"Name": "MB_P5V",
"PowerState": "On",
"ScaleFactor": 0.55,
"Thresholds": [
{
"Direction": "greater than",
"Name": "upper critical",
"Severity": 1,
"Value": 5.48
},
{
"Direction": "greater than",
"Name": "upper non critical",
"Severity": 0,
"Value": 5.24
},
{
"Direction": "less than",
"Name": "lower non critical",
"Severity": 0,
"Value": 4.76
},
{
"Direction": "less than",
"Name": "lower critical",
"Severity": 1,
"Value": 4.48
}
],
"Type": "ADC"
},
{
"Index": 5,
"Name": "MB_P5V_SB",
"PowerState": "On",
"ScaleFactor": 0.25,
"Thresholds": [
{
"Direction": "greater than",
"Name": "upper critical",
"Severity": 1,
"Value": 5.48
},
{
"Direction": "greater than",
"Name": "upper non critical",
"Severity": 0,
"Value": 5.24
},
{
"Direction": "less than",
"Name": "lower non critical",
"Severity": 0,
"Value": 4.76
},
{
"Direction": "less than",
"Name": "lower critical",
"Severity": 1,
"Value": 4.48
}
],
"Type": "ADC"
},
I use the busctrl command to see MB_P5V_SB information, it is normal.
root@fws7830bmc:~# busctl introspect --no-pager xyz.openbmc_project.EntityManager /xyz/openbmc_project/inventory/system/board/FWS7830_
Baseboard/MB_P5V
NAME TYPE SIGNATURE RESULT/VALUE FLAGS
org.freedesktop.DBus.Introspectable interface - - -
.Introspect method - s -
org.freedesktop.DBus.Peer interface - - -
.GetMachineId method - s -
.Ping method - - -
org.freedesktop.DBus.Properties interface - - -
.Get method ss v -
.GetAll method s a{sv} -
.Set method ssv - -
.PropertiesChanged signal sa{sv}as - -
xyz.openbmc_project.Configuration.ADC interface - - -
.Index property t 4 emits-change
.Name property s "MB_P5V" emits-change
.PowerState property s "On" emits-change
.ScaleFactor property d 0.55 emits-change
.Type property s "ADC" emits-change
xyz.openbmc_project.Configuration.ADC.Thresholds0 interface - - -
.Delete method - - -
.Direction property s "greater than" emits-change writable
.Name property s "upper critical" emits-change writable
.Severity property d 1 emits-change writable
.Value property d 5.48 emits-change writable
xyz.openbmc_project.Configuration.ADC.Thresholds1 interface - - -
.Delete method - - -
.Direction property s "greater than" emits-change writable
.Name property s "upper non critical" emits-change writable
.Severity property d 0 emits-change writable
.Value property d 5.24 emits-change writable
xyz.openbmc_project.Configuration.ADC.Thresholds2 interface - - -
.Delete method - - -
.Direction property s "less than" emits-change writable
.Name property s "lower non critical" emits-change writable
.Severity property d 0 emits-change writable
.Value property d 4.76 emits-change writable
xyz.openbmc_project.Configuration.ADC.Thresholds3 interface - - -
.Delete method - - -
.Direction property s "less than" emits-change writable
.Name property s "lower critical" emits-change writable
.Severity property d 1 emits-change writable
.Value property d 4.48 emits-change writable
But I use "ipmitoo sensor” command, it return the error information below as
MB P3V3 | 3.271 | Volts | ok | na | 2.947 | 3.046 | 3.511 | 3.596 | na
MB P5V | 2.982 | Volts | ok | na | 2.662 | 2.829 | 3.123 | 3.264 | na
MB P5V SB | 5.048 | Volts | ok | na | 4.484 | 4.766 | 5.245 | 5.471 | na
MB P12V | 7.215 | Volts | ok | na | 6.386 | 6.723 | 7.429 | 7.829 | na
Please give me some advise.
Many thanks
Paul
[-- Attachment #2: Type: text/html, Size: 26607 bytes --]
next reply other threads:[~2021-09-30 9:08 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-30 9:07 吳秉昌 [this message]
2021-09-30 10:03 ` Ipmitool command & entity-manager question Andrei Kartashev
2021-09-30 10:13 ` 吳秉昌
2021-09-30 15:00 ` Johnathan Mantey
2021-10-01 7:52 ` 吳秉昌
[not found] ` <99511633084704@mail.yandex-team.ru>
2021-10-13 9:05 ` 吳秉昌
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=42F9352C-E5A9-4A02-B877-95E8419EB3BE@gmail.com \
--to=wh800805@gmail.com \
--cc=openbmc@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).