* Tiogapass build @ 2020-07-15 12:17 Ilya Gousev 2020-07-15 17:56 ` Vijay Khemka 0 siblings, 1 reply; 6+ messages in thread From: Ilya Gousev @ 2020-07-15 12:17 UTC (permalink / raw) To: openbmc [-- Attachment #1: Type: text/plain, Size: 265 bytes --] Hi! I have tried to touch Tiogapass (by Wiwyn). I have added the devices for KVM. And it works. Now i want to get information about hardware (for example CPU and DIMM imformation, like model, clocks, etc.). How i can get it? Only from IPMI stack (like KCS)? Ilya [-- Attachment #2: Type: text/html, Size: 376 bytes --] ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Tiogapass build 2020-07-15 12:17 Tiogapass build Ilya Gousev @ 2020-07-15 17:56 ` Vijay Khemka 2020-07-15 18:26 ` Ilya Gousev 0 siblings, 1 reply; 6+ messages in thread From: Vijay Khemka @ 2020-07-15 17:56 UTC (permalink / raw) To: Ilya Gousev, openbmc [-- Attachment #1: Type: text/plain, Size: 777 bytes --] Hi Ilya, Please see my answers inline From: openbmc <openbmc-bounces+vijaykhemka=fb.com@lists.ozlabs.org> on behalf of Ilya Gousev <qweran@gmail.com> Date: Wednesday, July 15, 2020 at 5:18 AM To: "openbmc@lists.ozlabs.org" <openbmc@lists.ozlabs.org> Subject: Tiogapass build Hi! >I have tried to touch Tiogapass (by Wiwyn). Good. >I have added the devices for KVM. And it works. What are you trying for KVM here? >Now i want to get information about hardware (for example CPU and DIMM imformation, like model, clocks, etc.). How i can get it? Only from IPMI stack (like KCS)? Yes it can be accesses from IPMI stack via ipmi tools, you can run ipmitool from BMC console itself. And there is a file in /etc/appData.json which stores all of these data. Ilya [-- Attachment #2: Type: text/html, Size: 6886 bytes --] ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Tiogapass build 2020-07-15 17:56 ` Vijay Khemka @ 2020-07-15 18:26 ` Ilya Gousev 2020-07-16 17:35 ` Vijay Khemka 0 siblings, 1 reply; 6+ messages in thread From: Ilya Gousev @ 2020-07-15 18:26 UTC (permalink / raw) To: Vijay Khemka; +Cc: openbmc [-- Attachment #1: Type: text/plain, Size: 1450 bytes --] Hi, Vijay! About KVM: When I was build OpenBMC, KVM did not work. There was no vhub and video nodes in devicetree file. Is this done on purpose? Right now I have problem with KCS Bridge, but i fix it with udev rule like this: KERNEL=="ipmi-kcs3", SYMLINK+="ipmi_kcs3" And fixing * phosphor-ipmi-kcs_git.bb <http://phosphor-ipmi-kcs_git.bb>* *Right now i have a problem with starting ipmb service.* *Do you have such problems too?Or is it my fault?* *Thanks, * *Ilya* ср, 15 июл. 2020 г. в 20:56, Vijay Khemka <vijaykhemka@fb.com>: > Hi Ilya, > > Please see my answers inline > > > > *From: *openbmc <openbmc-bounces+vijaykhemka=fb.com@lists.ozlabs.org> on > behalf of Ilya Gousev <qweran@gmail.com> > *Date: *Wednesday, July 15, 2020 at 5:18 AM > *To: *"openbmc@lists.ozlabs.org" <openbmc@lists.ozlabs.org> > *Subject: *Tiogapass build > > > > Hi! > > > > >I have tried to touch Tiogapass (by Wiwyn). > > Good. > > >I have added the devices for KVM. And it works. > > What are you trying for KVM here? > > >Now i want to get information about hardware (for example CPU and DIMM > imformation, like model, clocks, etc.). How i can get it? Only from IPMI > stack (like KCS)? > > Yes it can be accesses from IPMI stack via ipmi tools, you can run > ipmitool from BMC console itself. And there is a file in /etc/appData.json > which stores all of these data. > > > > Ilya > [-- Attachment #2: Type: text/html, Size: 7076 bytes --] ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Tiogapass build 2020-07-15 18:26 ` Ilya Gousev @ 2020-07-16 17:35 ` Vijay Khemka 2020-07-21 18:35 ` Vijay Khemka 0 siblings, 1 reply; 6+ messages in thread From: Vijay Khemka @ 2020-07-16 17:35 UTC (permalink / raw) To: Ilya Gousev; +Cc: openbmc [-- Attachment #1: Type: text/plain, Size: 2174 bytes --] Hi Ilya, We don’t have any video card so no listing in device tree. KCS and IPMB should be working fine. We use kcs1 and kcs2 only. Just check if you are using latest kernel and has ipmb driver entry in device tree. Regards -Vijay From: Ilya Gousev <qweran@gmail.com> Date: Wednesday, July 15, 2020 at 11:26 AM To: Vijay Khemka <vijaykhemka@fb.com> Cc: "openbmc@lists.ozlabs.org" <openbmc@lists.ozlabs.org> Subject: Re: Tiogapass build Hi, Vijay! About KVM: When I was build OpenBMC, KVM did not work. There was no vhub and video nodes in devicetree file. Is this done on purpose? Right now I have problem with KCS Bridge, but i fix it with udev rule like this: KERNEL=="ipmi-kcs3", SYMLINK+="ipmi_kcs3" And fixing phosphor-ipmi-kcs_git.bb<https://urldefense.proofpoint.com/v2/url?u=http-3A__phosphor-2Dipmi-2Dkcs-5Fgit.bb&d=DwMFaQ&c=5VD0RTtNlTh3ycd41b3MUw&r=v9MU0Ki9pWnTXCWwjHPVgpnCR80vXkkcrIaqU7USl5g&m=xJd9l55w4_jXkxlHu57P3jeoPNHXgCEvjF2D9ByPU_g&s=CjSN51iKoIK-hHREyPitTu0Mq4-LvFeh-eMO9hJ_5MQ&e=> Right now i have a problem with starting ipmb service. Do you have such problems too? Or is it my fault? Thanks, Ilya ср, 15 июл. 2020 г. в 20:56, Vijay Khemka <vijaykhemka@fb.com<mailto:vijaykhemka@fb.com>>: Hi Ilya, Please see my answers inline From: openbmc <openbmc-bounces+vijaykhemka=fb.com@lists.ozlabs.org<mailto:fb.com@lists.ozlabs.org>> on behalf of Ilya Gousev <qweran@gmail.com<mailto:qweran@gmail.com>> Date: Wednesday, July 15, 2020 at 5:18 AM To: "openbmc@lists.ozlabs.org<mailto:openbmc@lists.ozlabs.org>" <openbmc@lists.ozlabs.org<mailto:openbmc@lists.ozlabs.org>> Subject: Tiogapass build Hi! >I have tried to touch Tiogapass (by Wiwyn). Good. >I have added the devices for KVM. And it works. What are you trying for KVM here? >Now i want to get information about hardware (for example CPU and DIMM imformation, like model, clocks, etc.). How i can get it? Only from IPMI stack (like KCS)? Yes it can be accesses from IPMI stack via ipmi tools, you can run ipmitool from BMC console itself. And there is a file in /etc/appData.json which stores all of these data. Ilya [-- Attachment #2: Type: text/html, Size: 9018 bytes --] ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Tiogapass build 2020-07-16 17:35 ` Vijay Khemka @ 2020-07-21 18:35 ` Vijay Khemka 2020-09-28 15:42 ` Bruce Mitchell 0 siblings, 1 reply; 6+ messages in thread From: Vijay Khemka @ 2020-07-21 18:35 UTC (permalink / raw) To: Ilya Gousev; +Cc: openbmc [-- Attachment #1: Type: text/plain, Size: 4158 bytes --] Hi Ilya, Please pull following commit from mainline linux and with latest openbmc tree, Everything should work. Please let me know if you need any help here. commit fa4c8ec6feaa3237f5d44cb8c6d0aa0dff6e1bcc Author: Andrew Jeffery <andrew@aj.id.au> Date: Sat Apr 11 11:44:58 2020 +0930 ARM: dts: aspeed: Change KCS nodes to v2 binding Fixes the following warnings for both g5 and g6 SoCs: arch/arm/boot/dts/aspeed-g5.dtsi:376.19-381.8: Warning (unit_address_vs_reg): /ahb/apb/lpc@1e789000/lpc-bmc@0/kcs1@0: node has a unit name, but no reg property Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au> commit d85fa6c6f337e768f25ba362e5d2ebb7769ac8c1 Author: Vijay Khemka <vijaykhemka@fb.com> Date: Mon Jan 27 17:18:17 2020 -0800 ARM: dts: aspeed: tiogapass: Add gpio line names Added GPIO line names for all gpio used in tiogapass platform, these line names will be used by libgpiod to control GPIOs Signed-off-by: Vijay Khemka <vijaykhemka@fb.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au> commit 3dcfff96f17a8e8a9a346f0beff10d75e7ca8edb Author: Vijay Khemka <vijaykhemka@fb.com> Date: Mon Jan 27 17:17:28 2020 -0800 ARM: dts: aspeed: tiogapass: Add IPMB device Adding IPMB devices for facebook tiogapass platform. Signed-off-by: Vijay Khemka <vijaykhemka@fb.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au> Regards -Vijay From: openbmc <openbmc-bounces+vijaykhemka=fb.com@lists.ozlabs.org> on behalf of Vijay Khemka <vijaykhemka@fb.com> Date: Thursday, July 16, 2020 at 10:37 AM To: Ilya Gousev <qweran@gmail.com> Cc: "openbmc@lists.ozlabs.org" <openbmc@lists.ozlabs.org> Subject: Re: Tiogapass build Hi Ilya, We don’t have any video card so no listing in device tree. KCS and IPMB should be working fine. We use kcs1 and kcs2 only. Just check if you are using latest kernel and has ipmb driver entry in device tree. Regards -Vijay From: Ilya Gousev <qweran@gmail.com> Date: Wednesday, July 15, 2020 at 11:26 AM To: Vijay Khemka <vijaykhemka@fb.com> Cc: "openbmc@lists.ozlabs.org" <openbmc@lists.ozlabs.org> Subject: Re: Tiogapass build Hi, Vijay! About KVM: When I was build OpenBMC, KVM did not work. There was no vhub and video nodes in devicetree file. Is this done on purpose? Right now I have problem with KCS Bridge, but i fix it with udev rule like this: KERNEL=="ipmi-kcs3", SYMLINK+="ipmi_kcs3" And fixing phosphor-ipmi-kcs_git.bb<https://urldefense.proofpoint.com/v2/url?u=http-3A__phosphor-2Dipmi-2Dkcs-5Fgit.bb&d=DwMFaQ&c=5VD0RTtNlTh3ycd41b3MUw&r=v9MU0Ki9pWnTXCWwjHPVgpnCR80vXkkcrIaqU7USl5g&m=xJd9l55w4_jXkxlHu57P3jeoPNHXgCEvjF2D9ByPU_g&s=CjSN51iKoIK-hHREyPitTu0Mq4-LvFeh-eMO9hJ_5MQ&e=> Right now i have a problem with starting ipmb service. Do you have such problems too? Or is it my fault? Thanks, Ilya ср, 15 июл. 2020 г. в 20:56, Vijay Khemka <vijaykhemka@fb.com<mailto:vijaykhemka@fb.com>>: Hi Ilya, Please see my answers inline From: openbmc <openbmc-bounces+vijaykhemka=fb.com@lists.ozlabs.org<mailto:fb.com@lists.ozlabs.org>> on behalf of Ilya Gousev <qweran@gmail.com<mailto:qweran@gmail.com>> Date: Wednesday, July 15, 2020 at 5:18 AM To: "openbmc@lists.ozlabs.org<mailto:openbmc@lists.ozlabs.org>" <openbmc@lists.ozlabs.org<mailto:openbmc@lists.ozlabs.org>> Subject: Tiogapass build Hi! >I have tried to touch Tiogapass (by Wiwyn). Good. >I have added the devices for KVM. And it works. What are you trying for KVM here? >Now i want to get information about hardware (for example CPU and DIMM imformation, like model, clocks, etc.). How i can get it? Only from IPMI stack (like KCS)? Yes it can be accesses from IPMI stack via ipmi tools, you can run ipmitool from BMC console itself. And there is a file in /etc/appData.json which stores all of these data. Ilya [-- Attachment #2: Type: text/html, Size: 15702 bytes --] ^ permalink raw reply [flat|nested] 6+ messages in thread
* RE: Tiogapass build 2020-07-21 18:35 ` Vijay Khemka @ 2020-09-28 15:42 ` Bruce Mitchell 0 siblings, 0 replies; 6+ messages in thread From: Bruce Mitchell @ 2020-09-28 15:42 UTC (permalink / raw) To: Vijay Khemka, Ilya Gousev; +Cc: openbmc Hello Vijay and Ilya, What is the right way to add the ASPEED AST2500 "Video Card" to Tioga Pass for OpenBMC as well as the hidg? The objective is to have a fully functional KVM on Tioga Pass. Thank you! -- Bruce From: openbmc [mailto:openbmc-bounces+bruce_mitchell=phoenix.com@lists.ozlabs.org] On Behalf Of Vijay Khemka Sent: Tuesday, July 21, 2020 11:36 To: Ilya Gousev Cc: openbmc@lists.ozlabs.org Subject: Re: Tiogapass build Hi Ilya, Please pull following commit from mainline linux and with latest openbmc tree, Everything should work. Please let me know if you need any help here. commit fa4c8ec6feaa3237f5d44cb8c6d0aa0dff6e1bcc Author: Andrew Jeffery <andrew@aj.id.au> Date: Sat Apr 11 11:44:58 2020 +0930 ARM: dts: aspeed: Change KCS nodes to v2 binding Fixes the following warnings for both g5 and g6 SoCs: arch/arm/boot/dts/aspeed-g5.dtsi:376.19-381.8: Warning (unit_address_vs_reg): /ahb/apb/lpc@1e789000/lpc-bmc@0/kcs1@0: node has a unit name, but no reg property Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au> commit d85fa6c6f337e768f25ba362e5d2ebb7769ac8c1 Author: Vijay Khemka <vijaykhemka@fb.com> Date: Mon Jan 27 17:18:17 2020 -0800 ARM: dts: aspeed: tiogapass: Add gpio line names Added GPIO line names for all gpio used in tiogapass platform, these line names will be used by libgpiod to control GPIOs Signed-off-by: Vijay Khemka <vijaykhemka@fb.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au> commit 3dcfff96f17a8e8a9a346f0beff10d75e7ca8edb Author: Vijay Khemka <vijaykhemka@fb.com> Date: Mon Jan 27 17:17:28 2020 -0800 ARM: dts: aspeed: tiogapass: Add IPMB device Adding IPMB devices for facebook tiogapass platform. Signed-off-by: Vijay Khemka <vijaykhemka@fb.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au> Regards -Vijay From: openbmc <openbmc-bounces+vijaykhemka=fb.com@lists.ozlabs.org> on behalf of Vijay Khemka <vijaykhemka@fb.com> Date: Thursday, July 16, 2020 at 10:37 AM To: Ilya Gousev <qweran@gmail.com> Cc: "openbmc@lists.ozlabs.org" <openbmc@lists.ozlabs.org> Subject: Re: Tiogapass build Hi Ilya, We don’t have any video card so no listing in device tree. KCS and IPMB should be working fine. We use kcs1 and kcs2 only. Just check if you are using latest kernel and has ipmb driver entry in device tree. Regards -Vijay From: Ilya Gousev <qweran@gmail.com> Date: Wednesday, July 15, 2020 at 11:26 AM To: Vijay Khemka <vijaykhemka@fb.com> Cc: "openbmc@lists.ozlabs.org" <openbmc@lists.ozlabs.org> Subject: Re: Tiogapass build Hi, Vijay! About KVM: When I was build OpenBMC, KVM did not work. There was no vhub and video nodes in devicetree file. Is this done on purpose? Right now I have problem with KCS Bridge, but i fix it with udev rule like this: KERNEL=="ipmi-kcs3", SYMLINK+="ipmi_kcs3" And fixing phosphor-ipmi-kcs_git.bb Right now i have a problem with starting ipmb service. Do you have such problems too? Or is it my fault? Thanks, Ilya ср, 15 июл. 2020 г. в 20:56, Vijay Khemka <vijaykhemka@fb.com>: Hi Ilya, Please see my answers inline From: openbmc <openbmc-bounces+vijaykhemka=fb.com@lists.ozlabs.org> on behalf of Ilya Gousev <qweran@gmail.com> Date: Wednesday, July 15, 2020 at 5:18 AM To: "openbmc@lists.ozlabs.org" <openbmc@lists.ozlabs.org> Subject: Tiogapass build Hi! >I have tried to touch Tiogapass (by Wiwyn). Good. >I have added the devices for KVM. And it works. What are you trying for KVM here? >Now i want to get information about hardware (for example CPU and DIMM imformation, like model, clocks, etc.). How i can get it? Only from IPMI stack (like KCS)? Yes it can be accesses from IPMI stack via ipmi tools, you can run ipmitool from BMC console itself. And there is a file in /etc/appData.json which stores all of these data. Ilya ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2020-09-28 15:44 UTC | newest] Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2020-07-15 12:17 Tiogapass build Ilya Gousev 2020-07-15 17:56 ` Vijay Khemka 2020-07-15 18:26 ` Ilya Gousev 2020-07-16 17:35 ` Vijay Khemka 2020-07-21 18:35 ` Vijay Khemka 2020-09-28 15:42 ` Bruce Mitchell
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).