* Unknown command gpio in u-boot
@ 2018-06-25 9:42 AKASH G J
2018-06-25 9:44 ` Paul Menzel
0 siblings, 1 reply; 4+ messages in thread
From: AKASH G J @ 2018-06-25 9:42 UTC (permalink / raw)
To: openbmc
[-- Attachment #1: Type: text/plain, Size: 215 bytes --]
Hi Team,
I tried to reset one GPIO using 'gpio' command in u-boot 2016.07. But it is
showing error "unknown command gpio". Please someone help, how to control
GPIO through u-boot.
Thanks and Regards,
Akash G J
[-- Attachment #2: Type: text/html, Size: 370 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Unknown command gpio in u-boot
2018-06-25 9:42 Unknown command gpio in u-boot AKASH G J
@ 2018-06-25 9:44 ` Paul Menzel
2018-06-25 9:58 ` AKASH G J
0 siblings, 1 reply; 4+ messages in thread
From: Paul Menzel @ 2018-06-25 9:44 UTC (permalink / raw)
To: AKASH G J; +Cc: openbmc
[-- Attachment #1: Type: text/plain, Size: 347 bytes --]
Dear Akash,
On 06/25/18 11:42, AKASH G J wrote:
> I tried to reset one GPIO using 'gpio' command in u-boot 2016.07. But it is
> showing error "unknown command gpio". Please someone help, how to control
> GPIO through u-boot.
Please tell us the board and the GPIO you tried to set with the exact command.
Kind regards,
Paul
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 5174 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Unknown command gpio in u-boot
2018-06-25 9:44 ` Paul Menzel
@ 2018-06-25 9:58 ` AKASH G J
2018-06-26 3:58 ` Simon Glass
0 siblings, 1 reply; 4+ messages in thread
From: AKASH G J @ 2018-06-25 9:58 UTC (permalink / raw)
To: Paul Menzel; +Cc: openbmc
[-- Attachment #1: Type: text/plain, Size: 511 bytes --]
The BMC I used is Aspeed ast-2500 and GPIO I want to control is GPIOB0.
On Mon, Jun 25, 2018 at 3:14 PM, Paul Menzel <pmenzel@molgen.mpg.de> wrote:
> Dear Akash,
>
>
> On 06/25/18 11:42, AKASH G J wrote:
>
> > I tried to reset one GPIO using 'gpio' command in u-boot 2016.07. But it
> is
> > showing error "unknown command gpio". Please someone help, how to control
> > GPIO through u-boot.
>
> Please tell us the board and the GPIO you tried to set with the exact
> command.
>
>
> Kind regards,
>
> Paul
>
>
[-- Attachment #2: Type: text/html, Size: 910 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Unknown command gpio in u-boot
2018-06-25 9:58 ` AKASH G J
@ 2018-06-26 3:58 ` Simon Glass
0 siblings, 0 replies; 4+ messages in thread
From: Simon Glass @ 2018-06-26 3:58 UTC (permalink / raw)
To: AKASH G J; +Cc: Paul Menzel, OpenBMC Maillist
Hi,
On 25 June 2018 at 03:58, AKASH G J <akashgj91@gmail.com> wrote:
> The BMC I used is Aspeed ast-2500 and GPIO I want to control is GPIOB0.
>
> On Mon, Jun 25, 2018 at 3:14 PM, Paul Menzel <pmenzel@molgen.mpg.de> wrote:
>>
>> Dear Akash,
>>
>>
>> On 06/25/18 11:42, AKASH G J wrote:
>>
>> > I tried to reset one GPIO using 'gpio' command in u-boot 2016.07. But it
>> > is
>> > showing error "unknown command gpio". Please someone help, how to
>> > control
>> > GPIO through u-boot.
>>
>> Please tell us the board and the GPIO you tried to set with the exact
>> command.
# CONFIG_CMD_GPIO is not set
This board does not appear to support GPIOs.
Regards,
Simon
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2018-06-26 3:58 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-06-25 9:42 Unknown command gpio in u-boot AKASH G J
2018-06-25 9:44 ` Paul Menzel
2018-06-25 9:58 ` AKASH G J
2018-06-26 3:58 ` Simon Glass
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).