* Boot Order in Redfish and DBUS @ 2020-11-20 8:39 Jayashree D 2020-11-21 18:34 ` Jayashree D 0 siblings, 1 reply; 6+ messages in thread From: Jayashree D @ 2020-11-20 8:39 UTC (permalink / raw) To: openbmc [-- Attachment #1: Type: text/plain, Size: 1402 bytes --] Classification: Internal Hi Team, I am working on BIOS boot order in my environment, to get and set the boot order sequence. How the boot order settings is handled using dbus interfaces and also in redfish ? Please provide your inputs/suggestions on this. Thanks, Jayashree ::DISCLAIMER:: ________________________________ The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents (with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates. Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of authorized representative of HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any email and/or attachments, please check them for viruses and other defects. ________________________________ [-- Attachment #2: Type: text/html, Size: 3563 bytes --] ^ permalink raw reply [flat|nested] 6+ messages in thread
* RE: Boot Order in Redfish and DBUS 2020-11-20 8:39 Boot Order in Redfish and DBUS Jayashree D @ 2020-11-21 18:34 ` Jayashree D 2020-11-22 12:57 ` Artem Senichev 0 siblings, 1 reply; 6+ messages in thread From: Jayashree D @ 2020-11-21 18:34 UTC (permalink / raw) To: openbmc [-- Attachment #1: Type: text/plain, Size: 1822 bytes --] Classification: Internal Hi Team, I am working on BIOS boot order in my environment, to get and set the boot order sequence. How the boot order settings is handled using dbus interfaces and also in redfish ? Please provide your inputs/suggestions on this. Thanks, Jayashree From: Jayashree D Sent: Friday, November 20, 2020 2:09 PM To: openbmc@lists.ozlabs.org Subject: Boot Order in Redfish and DBUS Classification: Internal Hi Team, I am working on BIOS boot order in my environment, to get and set the boot order sequence. How the boot order settings is handled using dbus interfaces and also in redfish ? Please provide your inputs/suggestions on this. Thanks, Jayashree ::DISCLAIMER:: ________________________________ The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents (with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates. Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of authorized representative of HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any email and/or attachments, please check them for viruses and other defects. ________________________________ [-- Attachment #2: Type: text/html, Size: 5203 bytes --] ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Boot Order in Redfish and DBUS 2020-11-21 18:34 ` Jayashree D @ 2020-11-22 12:57 ` Artem Senichev 2020-11-23 6:56 ` Jayashree D 0 siblings, 1 reply; 6+ messages in thread From: Artem Senichev @ 2020-11-22 12:57 UTC (permalink / raw) To: Jayashree D; +Cc: openbmc Hi Jayashree, AFAIK,OpenPOWER systems use dbus interface xyz.openbmc_project.Control.Boot.Source: https://github.com/openbmc/phosphor-host-ipmid/blob/515bc375cb8daaee981bae97fa7ae80e7bf65c62/chassishandler.cpp#L1720 -- Best regards, Artem Senichev On Sat, Nov 21, 2020 at 9:36 PM Jayashree D <jayashree-d@hcl.com> wrote: > > Classification: Internal > > Hi Team, > > > > I am working on BIOS boot order in my environment, to get and set the boot order sequence. > > How the boot order settings is handled using dbus interfaces and also in redfish ? > > Please provide your inputs/suggestions on this. > > > > Thanks, > > Jayashree > > > > > > From: Jayashree D > Sent: Friday, November 20, 2020 2:09 PM > To: openbmc@lists.ozlabs.org > Subject: Boot Order in Redfish and DBUS > > > > Classification: Internal > > Hi Team, > > > > I am working on BIOS boot order in my environment, to get and set the boot order sequence. > > How the boot order settings is handled using dbus interfaces and also in redfish ? > > Please provide your inputs/suggestions on this. > > > > Thanks, > > Jayashree > > > > > > ::DISCLAIMER:: > ________________________________ > The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents (with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates. Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of authorized representative of HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any email and/or attachments, please check them for viruses and other defects. > ________________________________ ^ permalink raw reply [flat|nested] 6+ messages in thread
* RE: Boot Order in Redfish and DBUS 2020-11-22 12:57 ` Artem Senichev @ 2020-11-23 6:56 ` Jayashree D 2020-11-23 8:25 ` chunhui.jia 0 siblings, 1 reply; 6+ messages in thread From: Jayashree D @ 2020-11-23 6:56 UTC (permalink / raw) To: Artem Senichev; +Cc: openbmc Classification: Internal Hi Artem Senichev, Thanks for your response. In phosphor-host-ipmid, boot mode and boot source dbus interfaces are used to get and set boot order. I need to display the boot order sequences ( "USB_DEV", "NET_IPV6", "SATA_HDD", "SATA_CD", "Others" ) using dbus interfaces. Is there any options to display the boot order sequences? Regards, Jayashree -----Original Message----- From: Artem Senichev <artemsen@gmail.com> Sent: Sunday, November 22, 2020 6:28 PM To: Jayashree D <jayashree-d@hcl.com> Cc: openbmc@lists.ozlabs.org Subject: Re: Boot Order in Redfish and DBUS [CAUTION: This Email is from outside the Organization. Unless you trust the sender, Don’t click links or open attachments as it may be a Phishing email, which can steal your Information and compromise your Computer.] Hi Jayashree, AFAIK,OpenPOWER systems use dbus interface xyz.openbmc_project.Control.Boot.Source: https://apc01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fopenbmc%2Fphosphor-host-ipmid%2Fblob%2F515bc375cb8daaee981bae97fa7ae80e7bf65c62%2Fchassishandler.cpp%23L1720&data=04%7C01%7Cjayashree-d%40hcl.com%7C079b5b5b08e04f6145d108d88ee63ee6%7C189de737c93a4f5a8b686f4ca9941912%7C0%7C0%7C637416466936635769%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=Z1hc2RbTGy04VE6G9gwf0R0OKAeP0VZd5u3DHKMtnSE%3D&reserved=0 -- Best regards, Artem Senichev On Sat, Nov 21, 2020 at 9:36 PM Jayashree D <jayashree-d@hcl.com> wrote: > > Classification: Internal > > Hi Team, > > > > I am working on BIOS boot order in my environment, to get and set the boot order sequence. > > How the boot order settings is handled using dbus interfaces and also in redfish ? > > Please provide your inputs/suggestions on this. > > > > Thanks, > > Jayashree > > > > > > From: Jayashree D > Sent: Friday, November 20, 2020 2:09 PM > To: openbmc@lists.ozlabs.org > Subject: Boot Order in Redfish and DBUS > > > > Classification: Internal > > Hi Team, > > > > I am working on BIOS boot order in my environment, to get and set the boot order sequence. > > How the boot order settings is handled using dbus interfaces and also in redfish ? > > Please provide your inputs/suggestions on this. > > > > Thanks, > > Jayashree > > > > > > ::DISCLAIMER:: > ________________________________ > The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents (with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates. Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of authorized representative of HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any email and/or attachments, please check them for viruses and other defects. > ________________________________ ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: RE: Boot Order in Redfish and DBUS 2020-11-23 6:56 ` Jayashree D @ 2020-11-23 8:25 ` chunhui.jia 2020-11-23 11:46 ` Jayashree D 0 siblings, 1 reply; 6+ messages in thread From: chunhui.jia @ 2020-11-23 8:25 UTC (permalink / raw) To: Jayashree D, Artem Senichev; +Cc: openbmc [-- Attachment #1: Type: text/plain, Size: 4095 bytes --] Boot order sequence is platform specific. You may need to check with your BIOS team for customizing a OEM IPMI command or other BIOS-BMC data exchange way for it. To my best knowledge, current openbmc code does not support it. 2020-11-23 chunhui.jia 发件人：Jayashree D <jayashree-d@hcl.com> 发送时间：2020-11-23 14:56 主题：RE: Boot Order in Redfish and DBUS 收件人："Artem Senichev"<artemsen@gmail.com> 抄送："openbmc@lists.ozlabs.org"<openbmc@lists.ozlabs.org> Classification: Internal Hi Artem Senichev, Thanks for your response. In phosphor-host-ipmid, boot mode and boot source dbus interfaces are used to get and set boot order. I need to display the boot order sequences ( "USB_DEV", "NET_IPV6", "SATA_HDD", "SATA_CD", "Others" ) using dbus interfaces. Is there any options to display the boot order sequences? Regards, Jayashree -----Original Message----- From: Artem Senichev <artemsen@gmail.com> Sent: Sunday, November 22, 2020 6:28 PM To: Jayashree D <jayashree-d@hcl.com> Cc: openbmc@lists.ozlabs.org Subject: Re: Boot Order in Redfish and DBUS [CAUTION: This Email is from outside the Organization. Unless you trust the sender, Don’t click links or open attachments as it may be a Phishing email, which can steal your Information and compromise your Computer.] Hi Jayashree, AFAIK,OpenPOWER systems use dbus interface xyz.openbmc_project.Control.Boot.Source: https://apc01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fopenbmc%2Fphosphor-host-ipmid%2Fblob%2F515bc375cb8daaee981bae97fa7ae80e7bf65c62%2Fchassishandler.cpp%23L1720&data=04%7C01%7Cjayashree-d%40hcl.com%7C079b5b5b08e04f6145d108d88ee63ee6%7C189de737c93a4f5a8b686f4ca9941912%7C0%7C0%7C637416466936635769%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=Z1hc2RbTGy04VE6G9gwf0R0OKAeP0VZd5u3DHKMtnSE%3D&reserved=0 -- Best regards, Artem Senichev On Sat, Nov 21, 2020 at 9:36 PM Jayashree D <jayashree-d@hcl.com> wrote: > > Classification: Internal > > Hi Team, > > > > I am working on BIOS boot order in my environment, to get and set the boot order sequence. > > How the boot order settings is handled using dbus interfaces and also in redfish ? > > Please provide your inputs/suggestions on this. > > > > Thanks, > > Jayashree > > > > > > From: Jayashree D > Sent: Friday, November 20, 2020 2:09 PM > To: openbmc@lists.ozlabs.org > Subject: Boot Order in Redfish and DBUS > > > > Classification: Internal > > Hi Team, > > > > I am working on BIOS boot order in my environment, to get and set the boot order sequence. > > How the boot order settings is handled using dbus interfaces and also in redfish ? > > Please provide your inputs/suggestions on this. > > > > Thanks, > > Jayashree > > > > > > ::DISCLAIMER:: > ________________________________ > The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents (with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates. Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of authorized representative of HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any email and/or attachments, please check them for viruses and other defects. > ________________________________ [-- Attachment #2: Type: text/html, Size: 9284 bytes --] ^ permalink raw reply [flat|nested] 6+ messages in thread
* RE: RE: Boot Order in Redfish and DBUS 2020-11-23 8:25 ` chunhui.jia @ 2020-11-23 11:46 ` Jayashree D 0 siblings, 0 replies; 6+ messages in thread From: Jayashree D @ 2020-11-23 11:46 UTC (permalink / raw) To: chunhui.jia; +Cc: openbmc [-- Attachment #1: Type: text/plain, Size: 4864 bytes --] Classification: Internal Thanks for your response. From: chunhui.jia <chunhui.jia@linux.intel.com> Sent: Monday, November 23, 2020 1:56 PM To: Jayashree D <jayashree-d@hcl.com>; Artem Senichev <artemsen@gmail.com> Cc: openbmc@lists.ozlabs.org Subject: Re: RE: Boot Order in Redfish and DBUS [CAUTION: This Email is from outside the Organization. Unless you trust the sender, Don’t click links or open attachments as it may be a Phishing email, which can steal your Information and compromise your Computer.] Boot order sequence is platform specific. You may need to check with your BIOS team for customizing a OEM IPMI command or other BIOS-BMC data exchange way for it. To my best knowledge, current openbmc code does not support it. 2020-11-23 ________________________________ chunhui.jia ________________________________ 发件人：Jayashree D <jayashree-d@hcl.com<mailto:jayashree-d@hcl.com>> 发送时间：2020-11-23 14:56 主题：RE: Boot Order in Redfish and DBUS 收件人："Artem Senichev"<artemsen@gmail.com<mailto:artemsen@gmail.com>> 抄送："openbmc@lists.ozlabs.org<mailto:openbmc@lists.ozlabs.org>"<openbmc@lists.ozlabs.org<mailto:openbmc@lists.ozlabs.org>> Classification: Internal Hi Artem Senichev, Thanks for your response. In phosphor-host-ipmid, boot mode and boot source dbus interfaces are used to get and set boot order. I need to display the boot order sequences ( "USB_DEV", "NET_IPV6", "SATA_HDD", "SATA_CD", "Others" ) using dbus interfaces. Is there any options to display the boot order sequences? Regards, Jayashree -----Original Message----- From: Artem Senichev <artemsen@gmail.com<mailto:artemsen@gmail.com>> Sent: Sunday, November 22, 2020 6:28 PM To: Jayashree D <jayashree-d@hcl.com<mailto:jayashree-d@hcl.com>> Cc: openbmc@lists.ozlabs.org<mailto:openbmc@lists.ozlabs.org> Subject: Re: Boot Order in Redfish and DBUS [CAUTION: This Email is from outside the Organization. Unless you trust the sender, Don’t click links or open attachments as it may be a Phishing email, which can steal your Information and compromise your Computer.] Hi Jayashree, AFAIK,OpenPOWER systems use dbus interface xyz.openbmc_project.Control.Boot.Source: https://apc01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com%2Fopenbmc%2Fphosphor-host-ipmid%2Fblob%2F515bc375cb8daaee981bae97fa7ae80e7bf65c62%2Fchassishandler.cpp%23L1720&data=04%7C01%7Cjayashree-d%40hcl.com%7C079b5b5b08e04f6145d108d88ee63ee6%7C189de737c93a4f5a8b686f4ca9941912%7C0%7C0%7C637416466936635769%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=Z1hc2RbTGy04VE6G9gwf0R0OKAeP0VZd5u3DHKMtnSE%3D&reserved=0 -- Best regards, Artem Senichev On Sat, Nov 21, 2020 at 9:36 PM Jayashree D <jayashree-d@hcl.com<mailto:jayashree-d@hcl.com>> wrote: > > Classification: Internal > > Hi Team, > > > > I am working on BIOS boot order in my environment, to get and set the boot order sequence. > > How the boot order settings is handled using dbus interfaces and also in redfish ? > > Please provide your inputs/suggestions on this. > > > > Thanks, > > Jayashree > > > > > > From: Jayashree D > Sent: Friday, November 20, 2020 2:09 PM > To: openbmc@lists.ozlabs.org<mailto:openbmc@lists.ozlabs.org> > Subject: Boot Order in Redfish and DBUS > > > > Classification: Internal > > Hi Team, > > > > I am working on BIOS boot order in my environment, to get and set the boot order sequence. > > How the boot order settings is handled using dbus interfaces and also in redfish ? > > Please provide your inputs/suggestions on this. > > > > Thanks, > > Jayashree > > > > > > ::DISCLAIMER:: > ________________________________ > The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents (with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates. Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of authorized representative of HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any email and/or attachments, please check them for viruses and other defects. > ________________________________ [-- Attachment #2: Type: text/html, Size: 27733 bytes --] ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2020-11-23 11:49 UTC | newest] Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2020-11-20 8:39 Boot Order in Redfish and DBUS Jayashree D 2020-11-21 18:34 ` Jayashree D 2020-11-22 12:57 ` Artem Senichev 2020-11-23 6:56 ` Jayashree D 2020-11-23 8:25 ` chunhui.jia 2020-11-23 11:46 ` Jayashree D
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).