From: Maxime Ripard <maxime.ripard@bootlin.com>
To: Kishon Vijay Abraham I <kishon@ti.com>,
Boris Brezillon <boris.brezillon@bootlin.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
linux-media@vger.kernel.org,
Archit Taneja <architt@codeaurora.org>,
Andrzej Hajda <a.hajda@samsung.com>, Chen-Yu Tsai <wens@csie.org>,
linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
linux-arm-kernel@lists.infradead.org,
Krzysztof Witos <kwitos@cadence.com>,
Rafal Ciepiela <rafalc@cadence.com>,
Maxime Ripard <maxime.ripard@bootlin.com>
Subject: [PATCH v3 08/10] dt-bindings: phy: Move the Cadence D-PHY bindings
Date: Fri, 7 Dec 2018 14:55:35 +0100 [thread overview]
Message-ID: <d548e7929e0efe73fe797202b98b7e554b4a4adc.1544190837.git-series.maxime.ripard@bootlin.com> (raw)
In-Reply-To: <cover.ad7c4feb3905658f10b022df4756a5ade280011f.1544190837.git-series.maxime.ripard@bootlin.com>
The Cadence D-PHY bindings was defined as part of the DSI block so far.
However, since it's now going to be a separate driver, we need to move the
binding to a file of its own.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
---
Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt | 21 +-------
Documentation/devicetree/bindings/phy/cdns,dphy.txt | 20 +++++++-
2 files changed, 20 insertions(+), 21 deletions(-)
create mode 100644 Documentation/devicetree/bindings/phy/cdns,dphy.txt
diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt b/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt
index f5725bb6c61c..525a4bfd8634 100644
--- a/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt
+++ b/Documentation/devicetree/bindings/display/bridge/cdns,dsi.txt
@@ -31,28 +31,7 @@ Required subnodes:
- one subnode per DSI device connected on the DSI bus. Each DSI device should
contain a reg property encoding its virtual channel.
-Cadence DPHY
-============
-
-Cadence DPHY block.
-
-Required properties:
-- compatible: should be set to "cdns,dphy".
-- reg: physical base address and length of the DPHY registers.
-- clocks: DPHY reference clocks.
-- clock-names: must contain "psm" and "pll_ref".
-- #phy-cells: must be set to 0.
-
-
Example:
- dphy0: dphy@fd0e0000{
- compatible = "cdns,dphy";
- reg = <0x0 0xfd0e0000 0x0 0x1000>;
- clocks = <&psm_clk>, <&pll_ref_clk>;
- clock-names = "psm", "pll_ref";
- #phy-cells = <0>;
- };
-
dsi0: dsi@fd0c0000 {
compatible = "cdns,dsi";
reg = <0x0 0xfd0c0000 0x0 0x1000>;
diff --git a/Documentation/devicetree/bindings/phy/cdns,dphy.txt b/Documentation/devicetree/bindings/phy/cdns,dphy.txt
new file mode 100644
index 000000000000..1095bc4e72d9
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/cdns,dphy.txt
@@ -0,0 +1,20 @@
+Cadence DPHY
+============
+
+Cadence DPHY block.
+
+Required properties:
+- compatible: should be set to "cdns,dphy".
+- reg: physical base address and length of the DPHY registers.
+- clocks: DPHY reference clocks.
+- clock-names: must contain "psm" and "pll_ref".
+- #phy-cells: must be set to 0.
+
+Example:
+ dphy0: dphy@fd0e0000{
+ compatible = "cdns,dphy";
+ reg = <0x0 0xfd0e0000 0x0 0x1000>;
+ clocks = <&psm_clk>, <&pll_ref_clk>;
+ clock-names = "psm", "pll_ref";
+ #phy-cells = <0>;
+ };
--
git-series 0.9.1
next prev parent reply other threads:[~2018-12-07 13:56 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-07 13:55 [PATCH v3 00/10] phy: Add configuration interface for MIPI D-PHY devices Maxime Ripard
2018-12-07 13:55 ` [PATCH v3 01/10] phy: Add MIPI D-PHY mode Maxime Ripard
2018-12-07 13:55 ` [PATCH v3 02/10] phy: Add configuration interface Maxime Ripard
2018-12-13 20:42 ` sakari.ailus
2018-12-07 13:55 ` [PATCH v3 03/10] phy: Add MIPI D-PHY configuration options Maxime Ripard
2018-12-13 20:49 ` sakari.ailus
2018-12-17 15:49 ` Maxime Ripard
2018-12-17 20:20 ` sakari.ailus
2018-12-19 15:40 ` Maxime Ripard
2018-12-13 20:54 ` sakari.ailus
2018-12-13 20:55 ` sakari.ailus
2018-12-07 13:55 ` [PATCH v3 04/10] phy: dphy: Add configuration helpers Maxime Ripard
2018-12-07 13:55 ` [PATCH v3 05/10] sun6i: dsi: Convert to generic phy handling Maxime Ripard
2018-12-07 13:55 ` [PATCH v3 06/10] phy: Move Allwinner A31 D-PHY driver to drivers/phy/ Maxime Ripard
2018-12-07 13:55 ` [PATCH v3 07/10] drm/bridge: cdns: Separate DSI and D-PHY configuration Maxime Ripard
2018-12-07 13:55 ` Maxime Ripard [this message]
2018-12-07 13:55 ` [PATCH v3 09/10] phy: Add Cadence D-PHY support Maxime Ripard
2018-12-07 13:55 ` [PATCH v3 10/10] drm/bridge: cdns: Convert to phy framework Maxime Ripard
2018-12-09 4:37 ` kbuild test robot
2018-12-20 10:52 ` kbuild test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d548e7929e0efe73fe797202b98b7e554b4a4adc.1544190837.git-series.maxime.ripard@bootlin.com \
--to=maxime.ripard@bootlin.com \
--cc=a.hajda@samsung.com \
--cc=architt@codeaurora.org \
--cc=boris.brezillon@bootlin.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=kishon@ti.com \
--cc=kwitos@cadence.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=rafalc@cadence.com \
--cc=thomas.petazzoni@bootlin.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).