From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: Shawn Guo <shawnguo@kernel.org>
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>,
Fabio Estevam <fabio.estevam@nxp.com>,
Chris Healy <cphealy@gmail.com>,
Lucas Stach <l.stach@pengutronix.de>,
Leonard Crestez <leonard.crestez@nxp.com>,
"A.s. Dong" <aisheng.dong@nxp.com>,
Richard Zhu <hongxing.zhu@nxp.com>,
linux-imx@nxp.com, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v3 5/5] arm64: dts: imx8mq-evk: Enable PCIE0 interface
Date: Tue, 19 Feb 2019 17:58:57 -0800 [thread overview]
Message-ID: <20190220015857.7136-6-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <20190220015857.7136-1-andrew.smirnov@gmail.com>
Enable PCIE0 interface connected to BCM4356 WiFi/Bluetooth module.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: "A.s. Dong" <aisheng.dong@nxp.com>
Cc: Richard Zhu <hongxing.zhu@nxp.com>
Cc: linux-imx@nxp.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 42 ++++++++++++++++++++
1 file changed, 42 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
index 64acccc4bfcb..226aeb9791a5 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
@@ -31,6 +31,12 @@
gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
+
+ pcie0_refclk: pcie0-refclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ };
};
&fec1 {
@@ -40,6 +46,17 @@
status = "okay";
};
+&gpio5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wifi_reset>;
+
+ wl-reg-on {
+ gpio-hog;
+ gpios = <29 GPIO_ACTIVE_HIGH>;
+ output-high;
+ };
+};
+
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
@@ -131,6 +148,18 @@
};
};
+&pcie0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie0>;
+ reset-gpio = <&gpio5 28 GPIO_ACTIVE_LOW>;
+ clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>,
+ <&clk IMX8MQ_CLK_PCIE1_AUX>,
+ <&clk IMX8MQ_CLK_PCIE1_PHY>,
+ <&pcie0_refclk>;
+ clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
+ status = "okay";
+};
+
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
@@ -195,6 +224,13 @@
>;
};
+ pinctrl_pcie0: pcie0grp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_I2C4_SCL_PCIE1_CLKREQ_B 0x76
+ MX8MQ_IOMUXC_UART4_RXD_GPIO5_IO28 0x16
+ >;
+ };
+
pinctrl_reg_usdhc2: regusdhc2grpgpio {
fsl,pins = <
MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41
@@ -300,4 +336,10 @@
MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
>;
};
+
+ pinctrl_wifi_reset: wifiresetgrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_UART4_TXD_GPIO5_IO29 0x16
+ >;
+ };
};
--
2.20.1
next prev parent reply other threads:[~2019-02-20 1:59 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-20 1:58 [PATCH v3 0/5] PCIE support for i.MX8MQ (DT changes) Andrey Smirnov
2019-02-20 1:58 ` [PATCH v3 1/5] arm64: dts: imx8mq: Mark iomuxc_gpr as i.MX6Q compatible Andrey Smirnov
2019-02-20 1:58 ` [PATCH v3 2/5] arm64: dts: imx8mq: Add a node for SRC IP block Andrey Smirnov
2019-02-20 1:58 ` [PATCH v3 3/5] arm64: dts: imx8mq: Combine PCIE power domains Andrey Smirnov
2019-02-20 1:58 ` [PATCH v3 4/5] arm64: dts: imx8mq: Add nodes for PCIe IP blocks Andrey Smirnov
2019-02-20 1:58 ` Andrey Smirnov [this message]
2019-02-20 8:18 ` [PATCH v3 5/5] arm64: dts: imx8mq-evk: Enable PCIE0 interface Lucas Stach
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190220015857.7136-6-andrew.smirnov@gmail.com \
--to=andrew.smirnov@gmail.com \
--cc=aisheng.dong@nxp.com \
--cc=cphealy@gmail.com \
--cc=fabio.estevam@nxp.com \
--cc=hongxing.zhu@nxp.com \
--cc=l.stach@pengutronix.de \
--cc=leonard.crestez@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).