From: Jason Wang <jasowang@redhat.com>
To: jasowang@redhat.com, mst@redhat.com, kvm@vger.kernel.org,
virtualization@lists.linux-foundation.org,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: peterx@redhat.com, linux-mm@kvack.org, aarcange@redhat.com
Subject: [RFC PATCH V2 1/5] vhost: generalize adding used elem
Date: Wed, 6 Mar 2019 02:18:08 -0500 [thread overview]
Message-ID: <1551856692-3384-2-git-send-email-jasowang@redhat.com> (raw)
In-Reply-To: <1551856692-3384-1-git-send-email-jasowang@redhat.com>
Use one generic vhost_copy_to_user() instead of two dedicated
accessor. This will simplify the conversion to fine grain
accessors. About 2% improvement of PPS were seen during vitio-user
txonly test.
Signed-off-by: Jason Wang <jasowang@redhat.com>
---
drivers/vhost/vhost.c | 11 +----------
1 file changed, 1 insertion(+), 10 deletions(-)
diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c
index a2e5dc7..400aa78 100644
--- a/drivers/vhost/vhost.c
+++ b/drivers/vhost/vhost.c
@@ -2251,16 +2251,7 @@ static int __vhost_add_used_n(struct vhost_virtqueue *vq,
start = vq->last_used_idx & (vq->num - 1);
used = vq->used->ring + start;
- if (count == 1) {
- if (vhost_put_user(vq, heads[0].id, &used->id)) {
- vq_err(vq, "Failed to write used id");
- return -EFAULT;
- }
- if (vhost_put_user(vq, heads[0].len, &used->len)) {
- vq_err(vq, "Failed to write used len");
- return -EFAULT;
- }
- } else if (vhost_copy_to_user(vq, used, heads, count * sizeof *used)) {
+ if (vhost_copy_to_user(vq, used, heads, count * sizeof *used)) {
vq_err(vq, "Failed to write used");
return -EFAULT;
}
--
1.8.3.1
next prev parent reply other threads:[~2019-03-06 7:18 UTC|newest]
Thread overview: 78+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-06 7:18 [RFC PATCH V2 0/5] vhost: accelerate metadata access through vmap() Jason Wang
2019-03-06 7:18 ` Jason Wang [this message]
2019-03-06 7:18 ` [RFC PATCH V2 2/5] vhost: fine grain userspace memory accessors Jason Wang
2019-03-06 10:45 ` Christophe de Dinechin
2019-03-07 2:38 ` Jason Wang
2019-03-06 7:18 ` [RFC PATCH V2 3/5] vhost: rename vq_iotlb_prefetch() to vq_meta_prefetch() Jason Wang
2019-03-06 7:18 ` [RFC PATCH V2 4/5] vhost: introduce helpers to get the size of metadata area Jason Wang
2019-03-06 10:56 ` Christophe de Dinechin
2019-03-07 2:40 ` Jason Wang
2019-03-06 18:43 ` Souptick Joarder
2019-03-07 2:42 ` Jason Wang
2019-03-06 7:18 ` [RFC PATCH V2 5/5] vhost: access vq metadata through kernel virtual address Jason Wang
2019-03-06 16:31 ` Michael S. Tsirkin
2019-03-07 2:45 ` Jason Wang
2019-03-07 15:34 ` Michael S. Tsirkin
2019-03-07 19:09 ` Jerome Glisse
2019-03-07 19:38 ` Andrea Arcangeli
2019-03-07 20:17 ` Jerome Glisse
2019-03-07 21:27 ` Andrea Arcangeli
2019-03-08 9:13 ` Jason Wang
2019-03-08 19:11 ` Andrea Arcangeli
2019-03-11 7:21 ` Jason Wang
2019-03-11 14:45 ` Jan Kara
2019-03-08 8:31 ` Jason Wang
2019-03-07 15:47 ` Michael S. Tsirkin
2019-03-07 17:56 ` Michael S. Tsirkin
2019-03-07 19:16 ` Andrea Arcangeli
2019-03-08 8:50 ` Jason Wang
2019-03-08 14:58 ` Jerome Glisse
2019-03-11 7:18 ` Jason Wang
2019-03-08 19:48 ` Andrea Arcangeli
2019-03-08 20:06 ` Jerome Glisse
2019-03-11 7:40 ` Jason Wang
2019-03-11 12:48 ` Michael S. Tsirkin
2019-03-11 13:43 ` Andrea Arcangeli
2019-03-12 2:56 ` Jason Wang
2019-03-12 3:51 ` Michael S. Tsirkin
2019-03-12 2:52 ` Jason Wang
2019-03-12 3:50 ` Michael S. Tsirkin
2019-03-12 7:15 ` Jason Wang
2019-03-07 19:17 ` Jerome Glisse
2019-03-08 2:21 ` Michael S. Tsirkin
2019-03-08 2:55 ` Jerome Glisse
2019-03-08 3:16 ` Michael S. Tsirkin
2019-03-08 3:40 ` Jerome Glisse
2019-03-08 3:43 ` Michael S. Tsirkin
2019-03-08 3:45 ` Jerome Glisse
2019-03-08 9:15 ` Jason Wang
2019-03-08 8:58 ` Jason Wang
2019-03-08 12:56 ` Michael S. Tsirkin
2019-03-08 15:02 ` Jerome Glisse
2019-03-08 19:13 ` Andrea Arcangeli
2019-03-08 14:12 ` [RFC PATCH V2 0/5] vhost: accelerate metadata access through vmap() Christoph Hellwig
2019-03-11 7:13 ` Jason Wang
2019-03-11 13:59 ` Michael S. Tsirkin
2019-03-11 18:14 ` David Miller
2019-03-12 2:59 ` Jason Wang
2019-03-12 3:52 ` Michael S. Tsirkin
2019-03-12 7:17 ` Jason Wang
2019-03-12 11:54 ` Michael S. Tsirkin
2019-03-12 15:46 ` James Bottomley
2019-03-12 20:04 ` Andrea Arcangeli
2019-03-12 20:53 ` James Bottomley
2019-03-12 21:11 ` Andrea Arcangeli
2019-03-12 21:19 ` James Bottomley
2019-03-12 21:53 ` Andrea Arcangeli
2019-03-12 22:02 ` James Bottomley
2019-03-12 22:50 ` Andrea Arcangeli
2019-03-12 22:57 ` James Bottomley
2019-03-13 16:05 ` Christoph Hellwig
2019-03-13 16:37 ` James Bottomley
2019-03-14 10:42 ` Michael S. Tsirkin
2019-03-14 13:49 ` Jason Wang
2019-03-14 19:33 ` Andrea Arcangeli
2019-03-15 4:39 ` Jason Wang
2019-03-12 5:14 ` James Bottomley
2019-03-12 7:51 ` Jason Wang
2019-03-12 7:53 ` Jason Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1551856692-3384-2-git-send-email-jasowang@redhat.com \
--to=jasowang@redhat.com \
--cc=aarcange@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mst@redhat.com \
--cc=netdev@vger.kernel.org \
--cc=peterx@redhat.com \
--cc=virtualization@lists.linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).