From: Fabrice Gasnier <fabrice.gasnier@st.com>
To: <jic23@kernel.org>
Cc: <linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <mcoquelin.stm32@gmail.com>,
<alexandre.torgue@st.com>, <fabrice.gasnier@st.com>,
<linux-iio@vger.kernel.org>, <lars@metafoo.de>, <knaack.h@gmx.de>,
<pmeerw@pmeerw.net>, <linux-stm32@st-md-mailman.stormreply.com>,
<arnaud.pouliquen@st.com>, <olivier.moysan@st.com>
Subject: [PATCH v2 4/8] iio: adc: stm32-dfsdm: move dma slave config to start routine
Date: Thu, 21 Mar 2019 17:47:25 +0100 [thread overview]
Message-ID: <1553186849-6261-5-git-send-email-fabrice.gasnier@st.com> (raw)
In-Reply-To: <1553186849-6261-1-git-send-email-fabrice.gasnier@st.com>
Move DMA slave configuration to start routine: depending on regular or
injected mode is in use, DMA needs to read resp. RDATAR or JDATAR.
This is precursor patch to introduce injected mode (used for scan).
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
---
drivers/iio/adc/stm32-dfsdm-adc.c | 31 +++++++++++--------------------
1 file changed, 11 insertions(+), 20 deletions(-)
diff --git a/drivers/iio/adc/stm32-dfsdm-adc.c b/drivers/iio/adc/stm32-dfsdm-adc.c
index 818627f..66e2ea0 100644
--- a/drivers/iio/adc/stm32-dfsdm-adc.c
+++ b/drivers/iio/adc/stm32-dfsdm-adc.c
@@ -556,6 +556,11 @@ static void stm32_dfsdm_audio_dma_buffer_done(void *data)
static int stm32_dfsdm_adc_dma_start(struct iio_dev *indio_dev)
{
struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
+ struct dma_slave_config config = {
+ .src_addr = (dma_addr_t)adc->dfsdm->phys_base +
+ DFSDM_RDATAR(adc->fl_id),
+ .src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
+ };
struct dma_async_tx_descriptor *desc;
dma_cookie_t cookie;
int ret;
@@ -566,6 +571,10 @@ static int stm32_dfsdm_adc_dma_start(struct iio_dev *indio_dev)
dev_dbg(&indio_dev->dev, "%s size=%d watermark=%d\n", __func__,
adc->buf_sz, adc->buf_sz / 2);
+ ret = dmaengine_slave_config(adc->dma_chan, &config);
+ if (ret)
+ return ret;
+
/* Prepare a DMA cyclic transaction */
desc = dmaengine_prep_dma_cyclic(adc->dma_chan,
adc->dma_buf,
@@ -925,12 +934,6 @@ static void stm32_dfsdm_dma_release(struct iio_dev *indio_dev)
static int stm32_dfsdm_dma_request(struct iio_dev *indio_dev)
{
struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
- struct dma_slave_config config = {
- .src_addr = (dma_addr_t)adc->dfsdm->phys_base +
- DFSDM_RDATAR(adc->fl_id),
- .src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES,
- };
- int ret;
adc->dma_chan = dma_request_slave_channel(&indio_dev->dev, "rx");
if (!adc->dma_chan)
@@ -940,23 +943,11 @@ static int stm32_dfsdm_dma_request(struct iio_dev *indio_dev)
DFSDM_DMA_BUFFER_SIZE,
&adc->dma_buf, GFP_KERNEL);
if (!adc->rx_buf) {
- ret = -ENOMEM;
- goto err_release;
+ dma_release_channel(adc->dma_chan);
+ return -ENOMEM;
}
- ret = dmaengine_slave_config(adc->dma_chan, &config);
- if (ret)
- goto err_free;
-
return 0;
-
-err_free:
- dma_free_coherent(adc->dma_chan->device->dev, DFSDM_DMA_BUFFER_SIZE,
- adc->rx_buf, adc->dma_buf);
-err_release:
- dma_release_channel(adc->dma_chan);
-
- return ret;
}
static int stm32_dfsdm_adc_chan_init_one(struct iio_dev *indio_dev,
--
2.7.4
next prev parent reply other threads:[~2019-03-21 16:48 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-21 16:47 [PATCH v2 0/8] iio: adc: stm32-dfsdm: add buffer modes Fabrice Gasnier
2019-03-21 16:47 ` [PATCH v2 1/8] iio: adc: stm32-dfsdm: make spi_master_freq more accurate Fabrice Gasnier
2019-03-24 16:41 ` Jonathan Cameron
2019-03-21 16:47 ` [PATCH v2 2/8] iio: adc: stm32-dfsdm: continuous mode depends on current mode Fabrice Gasnier
2019-03-24 16:43 ` Jonathan Cameron
2019-03-21 16:47 ` [PATCH v2 3/8] iio: adc: stm32-dfsdm: move dma enable from start_conv() to start_dma() Fabrice Gasnier
2019-03-24 16:44 ` Jonathan Cameron
2019-03-21 16:47 ` Fabrice Gasnier [this message]
2019-03-24 16:45 ` [PATCH v2 4/8] iio: adc: stm32-dfsdm: move dma slave config to start routine Jonathan Cameron
2019-03-21 16:47 ` [PATCH v2 5/8] iio: adc: stm32-dfsdm: enable hw consumer Fabrice Gasnier
2019-03-24 16:45 ` Jonathan Cameron
2019-03-21 16:47 ` [PATCH v2 6/8] iio: adc: stm32-dfsdm: add support for scan mode Fabrice Gasnier
2019-03-24 16:46 ` Jonathan Cameron
2019-03-21 16:47 ` [PATCH v2 7/8] iio: adc: stm32-dfsdm: add support for buffer modes Fabrice Gasnier
2019-03-24 17:11 ` Jonathan Cameron
2019-03-21 16:47 ` [PATCH v2 8/8] iio: adc: stm32-dfsdm: claim direct mode for raw read and settings Fabrice Gasnier
2019-03-24 17:12 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1553186849-6261-5-git-send-email-fabrice.gasnier@st.com \
--to=fabrice.gasnier@st.com \
--cc=alexandre.torgue@st.com \
--cc=arnaud.pouliquen@st.com \
--cc=jic23@kernel.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=olivier.moysan@st.com \
--cc=pmeerw@pmeerw.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).