From: Daniel Baluta <daniel.baluta@nxp.com>
To: broonie@kernel.org
Cc: l.stach@pengutronix.de, mihai.serban@gmail.com,
alsa-devel@alsa-project.org, viorel.suman@nxp.com,
timur@kernel.org, shengjiu.wang@nxp.com, angus@akkea.ca,
tiwai@suse.com, nicoleotsuka@gmail.com, linux-imx@nxp.com,
kernel@pengutronix.de, festevam@gmail.com,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
robh@kernel.org, Daniel Baluta <daniel.baluta@nxp.com>
Subject: [PATCH v2 3/7] ASoC: fsl_sai: Add support to enable multiple data lines
Date: Sun, 28 Jul 2019 22:24:25 +0300 [thread overview]
Message-ID: <20190728192429.1514-4-daniel.baluta@nxp.com> (raw)
In-Reply-To: <20190728192429.1514-1-daniel.baluta@nxp.com>
SAI supports up to 8 Rx/Tx data lines which can be enabled
using TCE/RCE bits of TCR3/RCR3 registers.
Data lines to be enabled are read from DT fsl,dl-mask property.
By default (if no DT entry is provided) only data line 0 is enabled.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
---
sound/soc/fsl/fsl_sai.c | 11 ++++++++++-
sound/soc/fsl/fsl_sai.h | 4 +++-
2 files changed, 13 insertions(+), 2 deletions(-)
diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c
index 637b1d12a575..5e7cb7fd29f5 100644
--- a/sound/soc/fsl/fsl_sai.c
+++ b/sound/soc/fsl/fsl_sai.c
@@ -601,7 +601,7 @@ static int fsl_sai_startup(struct snd_pcm_substream *substream,
regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx),
FSL_SAI_CR3_TRCE_MASK,
- FSL_SAI_CR3_TRCE);
+ FSL_SAI_CR3_TRCE(sai->soc_data->dl_mask[tx]);
ret = snd_pcm_hw_constraint_list(substream->runtime, 0,
SNDRV_PCM_HW_PARAM_RATE, &fsl_sai_rate_constraints);
@@ -888,6 +888,15 @@ static int fsl_sai_probe(struct platform_device *pdev)
}
}
+ /*
+ * active data lines mask for TX/RX, defaults to 1 (only the first
+ * data line is enabled
+ */
+ sai->dl_mask[RX] = 1;
+ sai->dl_mask[TX] = 1;
+ of_property_read_u32_index(np, "fsl,dl-mask", RX, &sai->dl_mask[RX]);
+ of_property_read_u32_index(np, "fsl,dl-mask", TX, &sai->dl_mask[TX]);
+
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
dev_err(&pdev->dev, "no irq for node %s\n", pdev->name);
diff --git a/sound/soc/fsl/fsl_sai.h b/sound/soc/fsl/fsl_sai.h
index 20c5b9b1e8bc..6d32f0950ec5 100644
--- a/sound/soc/fsl/fsl_sai.h
+++ b/sound/soc/fsl/fsl_sai.h
@@ -109,7 +109,7 @@
#define FSL_SAI_CR2_DIV_MASK 0xff
/* SAI Transmit and Receive Configuration 3 Register */
-#define FSL_SAI_CR3_TRCE BIT(16)
+#define FSL_SAI_CR3_TRCE(x) ((x) << 16)
#define FSL_SAI_CR3_TRCE_MASK GENMASK(23, 16)
#define FSL_SAI_CR3_WDFL(x) (x)
#define FSL_SAI_CR3_WDFL_MASK 0x1f
@@ -176,6 +176,8 @@ struct fsl_sai {
unsigned int slots;
unsigned int slot_width;
+ unsigned int dl_mask[2];
+
const struct fsl_sai_soc_data *soc_data;
struct snd_dmaengine_dai_dma_data dma_params_rx;
struct snd_dmaengine_dai_dma_data dma_params_tx;
--
2.17.1
next prev parent reply other threads:[~2019-07-28 19:25 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-07-28 19:24 [PATCH v2 0/7] Add support for new SAI IP version Daniel Baluta
2019-07-28 19:24 ` [PATCH v2 1/7] ASoC: fsl_sai: Add registers definition for multiple datalines Daniel Baluta
2019-07-29 19:42 ` Nicolin Chen
2019-07-29 19:57 ` [alsa-devel] " Daniel Baluta
2019-07-29 20:20 ` Mark Brown
2019-07-30 7:59 ` Nicolin Chen
2019-08-06 11:15 ` Daniel Baluta
2019-08-07 1:12 ` Nicolin Chen
2019-07-28 19:24 ` [PATCH v2 2/7] ASoC: fsl_sai: Update Tx/Rx channel enable mask Daniel Baluta
2019-07-28 19:24 ` Daniel Baluta [this message]
2019-07-29 20:21 ` [PATCH v2 3/7] ASoC: fsl_sai: Add support to enable multiple data lines Nicolin Chen
2019-08-06 15:23 ` Daniel Baluta
2019-08-07 1:14 ` Nicolin Chen
2019-07-28 19:24 ` [PATCH v2 4/7] ASoC: dt-bindings: Document dl-mask property Daniel Baluta
2019-07-29 20:15 ` Nicolin Chen
2019-07-29 20:27 ` Daniel Baluta
2019-07-28 19:24 ` [PATCH v2 5/7] ASoC: fsl_sai: Add support for SAI new version Daniel Baluta
2019-07-28 19:24 ` [PATCH v2 6/7] ASoC: fsl_sai: Add support for imx7ulp/imx8mq Daniel Baluta
2019-07-30 8:05 ` Nicolin Chen
2019-07-28 19:24 ` [PATCH v2 7/7] ASoC: dt-bindings: Introduce compatible strings for 7ULP and 8MQ Daniel Baluta
2019-07-30 8:01 ` Nicolin Chen
2019-07-30 12:02 ` [alsa-devel] " Daniel Baluta
2019-07-30 12:04 ` Mark Brown
2019-07-30 12:10 ` Daniel Baluta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190728192429.1514-4-daniel.baluta@nxp.com \
--to=daniel.baluta@nxp.com \
--cc=alsa-devel@alsa-project.org \
--cc=angus@akkea.ca \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=l.stach@pengutronix.de \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mihai.serban@gmail.com \
--cc=nicoleotsuka@gmail.com \
--cc=robh@kernel.org \
--cc=shengjiu.wang@nxp.com \
--cc=timur@kernel.org \
--cc=tiwai@suse.com \
--cc=viorel.suman@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).