From: Alexandru Ardelean <alexandru.ardelean@analog.com>
To: <linux-iio@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Cc: <jic23@kernel.org>, Alexandru Ardelean <alexandru.ardelean@analog.com>
Subject: [PATCH 01/10] iio: imu: adis: rename txrx_lock -> state_lock
Date: Thu, 26 Sep 2019 14:18:03 +0300 [thread overview]
Message-ID: <20190926111812.15957-2-alexandru.ardelean@analog.com> (raw)
In-Reply-To: <20190926111812.15957-1-alexandru.ardelean@analog.com>
The lock can be extended a bit to protect other elements that are not
particular to just TX/RX. Another idea would have been to just add a new
`state_lock`, but that would mean 2 locks which would be redundant, and
probably cause more potential for dead-locks.
What will be done in the next patches, will be to add some unlocked
versions for read/write_reg functions.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
---
drivers/iio/imu/adis.c | 10 +++++-----
drivers/iio/imu/adis_buffer.c | 4 ++--
include/linux/iio/imu/adis.h | 2 +-
3 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/iio/imu/adis.c b/drivers/iio/imu/adis.c
index 1631c255deab..3c2d896e3a96 100644
--- a/drivers/iio/imu/adis.c
+++ b/drivers/iio/imu/adis.c
@@ -70,7 +70,7 @@ int adis_write_reg(struct adis *adis, unsigned int reg,
},
};
- mutex_lock(&adis->txrx_lock);
+ mutex_lock(&adis->state_lock);
spi_message_init(&msg);
@@ -114,7 +114,7 @@ int adis_write_reg(struct adis *adis, unsigned int reg,
}
out_unlock:
- mutex_unlock(&adis->txrx_lock);
+ mutex_unlock(&adis->state_lock);
return ret;
}
@@ -166,7 +166,7 @@ int adis_read_reg(struct adis *adis, unsigned int reg,
},
};
- mutex_lock(&adis->txrx_lock);
+ mutex_lock(&adis->state_lock);
spi_message_init(&msg);
if (adis->current_page != page) {
@@ -211,7 +211,7 @@ int adis_read_reg(struct adis *adis, unsigned int reg,
}
out_unlock:
- mutex_unlock(&adis->txrx_lock);
+ mutex_unlock(&adis->state_lock);
return ret;
}
@@ -437,7 +437,7 @@ EXPORT_SYMBOL_GPL(adis_single_conversion);
int adis_init(struct adis *adis, struct iio_dev *indio_dev,
struct spi_device *spi, const struct adis_data *data)
{
- mutex_init(&adis->txrx_lock);
+ mutex_init(&adis->state_lock);
adis->spi = spi;
adis->data = data;
iio_device_set_drvdata(indio_dev, adis);
diff --git a/drivers/iio/imu/adis_buffer.c b/drivers/iio/imu/adis_buffer.c
index 9ac8356d9a95..bf581a2c321d 100644
--- a/drivers/iio/imu/adis_buffer.c
+++ b/drivers/iio/imu/adis_buffer.c
@@ -123,7 +123,7 @@ static irqreturn_t adis_trigger_handler(int irq, void *p)
return -ENOMEM;
if (adis->data->has_paging) {
- mutex_lock(&adis->txrx_lock);
+ mutex_lock(&adis->state_lock);
if (adis->current_page != 0) {
adis->tx[0] = ADIS_WRITE_REG(ADIS_REG_PAGE_ID);
adis->tx[1] = 0;
@@ -138,7 +138,7 @@ static irqreturn_t adis_trigger_handler(int irq, void *p)
if (adis->data->has_paging) {
adis->current_page = 0;
- mutex_unlock(&adis->txrx_lock);
+ mutex_unlock(&adis->state_lock);
}
iio_push_to_buffers_with_timestamp(indio_dev, adis->buffer,
diff --git a/include/linux/iio/imu/adis.h b/include/linux/iio/imu/adis.h
index 4c53815bb729..3ed5eceaac2d 100644
--- a/include/linux/iio/imu/adis.h
+++ b/include/linux/iio/imu/adis.h
@@ -61,7 +61,7 @@ struct adis {
const struct adis_data *data;
struct adis_burst *burst;
- struct mutex txrx_lock;
+ struct mutex state_lock;
struct spi_message msg;
struct spi_transfer *xfer;
unsigned int current_page;
--
2.20.1
next prev parent reply other threads:[~2019-09-26 11:18 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-26 11:18 [PATCH 00/10] iio: imu: adis: cleanup lock usage Alexandru Ardelean
2019-09-26 11:18 ` Alexandru Ardelean [this message]
2019-10-06 8:53 ` [PATCH 01/10] iio: imu: adis: rename txrx_lock -> state_lock Jonathan Cameron
2019-10-06 9:06 ` Jonathan Cameron
2019-10-07 10:18 ` Ardelean, Alexandru
2019-09-26 11:18 ` [PATCH 02/10] iio: imu: adis: add unlocked read/write function versions Alexandru Ardelean
2019-10-06 9:12 ` Jonathan Cameron
2019-10-07 21:16 ` Jonathan Cameron
2019-10-08 6:54 ` Ardelean, Alexandru
2019-10-08 8:47 ` Ardelean, Alexandru
2019-10-08 8:58 ` Ardelean, Alexandru
2019-10-12 13:40 ` Jonathan Cameron
2019-09-26 11:18 ` [PATCH 03/10] iio: imu: adis[16480]: group RW into a single lock in adis_enable_irq() Alexandru Ardelean
2019-10-06 9:13 ` Jonathan Cameron
2019-09-26 11:18 ` [PATCH 04/10] iio: imu: adis: create an unlocked version of adis_check_status() Alexandru Ardelean
2019-10-06 9:13 ` Jonathan Cameron
2019-09-26 11:18 ` [PATCH 05/10] iio: imu: adis: create an unlocked version of adis_reset() Alexandru Ardelean
2019-10-06 9:19 ` Jonathan Cameron
2019-09-26 11:18 ` [PATCH 06/10] iio: imu: adis: protect initial startup routine with state lock Alexandru Ardelean
2019-10-06 9:20 ` Jonathan Cameron
2019-09-26 11:18 ` [PATCH 07/10] iio: imu: adis: group single conversion under a single " Alexandru Ardelean
2019-10-06 9:20 ` Jonathan Cameron
2019-09-26 11:18 ` [PATCH 08/10] iio: imu: adis16400: rework locks using ADIS library's " Alexandru Ardelean
2019-10-06 9:20 ` Jonathan Cameron
2019-09-26 11:18 ` [PATCH 09/10] iio: gyro: adis16136: " Alexandru Ardelean
2019-10-06 9:22 ` Jonathan Cameron
2019-09-26 11:18 ` [PATCH 10/10] iio: imu: adis16480: use state lock for filter freq set Alexandru Ardelean
2019-10-06 9:24 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190926111812.15957-2-alexandru.ardelean@analog.com \
--to=alexandru.ardelean@analog.com \
--cc=jic23@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).