[tip: x86/mm] x86/mm: Clean up the pmd_read_atomic() comments - tip-bot2 for Ingo Molnar

From: "tip-bot2 for Ingo Molnar" <tip-bot2@linutronix.de>
To: linux-tip-commits@vger.kernel.org
Cc: Wei Yang <richardw.yang@linux.intel.com>,
	Andy Lutomirski <luto@kernel.org>, Borislav Petkov <bp@alien8.de>,
	Dave Hansen <dave.hansen@linux.intel.com>,
	"H. Peter Anvin" <hpa@zytor.com>,
	Linus Torvalds <torvalds@linux-foundation.org>,
	Peter Zijlstra <peterz@infradead.org>,
	Rik van Riel <riel@surriel.com>,
	Thomas Gleixner <tglx@linutronix.de>,
	Ingo Molnar <mingo@kernel.org>,
	linux-kernel@vger.kernel.org
Subject: [tip: x86/mm] x86/mm: Clean up the pmd_read_atomic() comments
Date: Fri, 27 Sep 2019 08:10:57 -0000	[thread overview]
Message-ID: <156957185765.9866.13900435982443947626.tip-bot2@tip-bot2> (raw)

The following commit has been merged into the x86/mm branch of tip:

Commit-ID:     44e09568cf2d874cb2a8e2ac35acf71a9ae3402b
Gitweb:        https://git.kernel.org/tip/44e09568cf2d874cb2a8e2ac35acf71a9ae3402b
Author:        Ingo Molnar <mingo@kernel.org>
AuthorDate:    Wed, 25 Sep 2019 08:38:57 +02:00
Committer:     Ingo Molnar <mingo@kernel.org>
CommitterDate: Wed, 25 Sep 2019 10:13:27 +02:00

x86/mm: Clean up the pmd_read_atomic() comments

Fix spelling, consistent parenthesis and grammar - and also clarify
the language where needed.

Reviewed-by: Wei Yang <richardw.yang@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
---
 arch/x86/include/asm/pgtable-3level.h | 44 +++++++++++++-------------
 1 file changed, 23 insertions(+), 21 deletions(-)

diff --git a/arch/x86/include/asm/pgtable-3level.h b/arch/x86/include/asm/pgtable-3level.h
index 1796462..5afb5e0 100644
--- a/arch/x86/include/asm/pgtable-3level.h
+++ b/arch/x86/include/asm/pgtable-3level.h
@@ -36,39 +36,41 @@ static inline void native_set_pte(pte_t *ptep, pte_t pte)
 
 #define pmd_read_atomic pmd_read_atomic
 /*
- * pte_offset_map_lock on 32bit PAE kernels was reading the pmd_t with
- * a "*pmdp" dereference done by gcc. Problem is, in certain places
- * where pte_offset_map_lock is called, concurrent page faults are
+ * pte_offset_map_lock() on 32-bit PAE kernels was reading the pmd_t with
+ * a "*pmdp" dereference done by GCC. Problem is, in certain places
+ * where pte_offset_map_lock() is called, concurrent page faults are
  * allowed, if the mmap_sem is hold for reading. An example is mincore
  * vs page faults vs MADV_DONTNEED. On the page fault side
- * pmd_populate rightfully does a set_64bit, but if we're reading the
+ * pmd_populate() rightfully does a set_64bit(), but if we're reading the
  * pmd_t with a "*pmdp" on the mincore side, a SMP race can happen
- * because gcc will not read the 64bit of the pmd atomically. To fix
- * this all places running pte_offset_map_lock() while holding the
+ * because GCC will not read the 64-bit value of the pmd atomically.
+ *
+ * To fix this all places running pte_offset_map_lock() while holding the
  * mmap_sem in read mode, shall read the pmdp pointer using this
- * function to know if the pmd is null nor not, and in turn to know if
+ * function to know if the pmd is null or not, and in turn to know if
  * they can run pte_offset_map_lock() or pmd_trans_huge() or other pmd
  * operations.
  *
- * Without THP if the mmap_sem is hold for reading, the pmd can only
- * transition from null to not null while pmd_read_atomic runs. So
+ * Without THP if the mmap_sem is held for reading, the pmd can only
+ * transition from null to not null while pmd_read_atomic() runs. So
  * we can always return atomic pmd values with this function.
  *
- * With THP if the mmap_sem is hold for reading, the pmd can become
+ * With THP if the mmap_sem is held for reading, the pmd can become
  * trans_huge or none or point to a pte (and in turn become "stable")
- * at any time under pmd_read_atomic. We could read it really
- * atomically here with a atomic64_read for the THP enabled case (and
+ * at any time under pmd_read_atomic(). We could read it truly
+ * atomically here with an atomic64_read() for the THP enabled case (and
  * it would be a whole lot simpler), but to avoid using cmpxchg8b we
  * only return an atomic pmdval if the low part of the pmdval is later
- * found stable (i.e. pointing to a pte). And we're returning a none
- * pmdval if the low part of the pmd is none. In some cases the high
- * and low part of the pmdval returned may not be consistent if THP is
- * enabled (the low part may point to previously mapped hugepage,
- * while the high part may point to a more recently mapped hugepage),
- * but pmd_none_or_trans_huge_or_clear_bad() only needs the low part
- * of the pmd to be read atomically to decide if the pmd is unstable
- * or not, with the only exception of when the low part of the pmd is
- * zero in which case we return a none pmd.
+ * found to be stable (i.e. pointing to a pte). We are also returning a
+ * 'none' (zero) pmdval if the low part of the pmd is zero.
+ *
+ * In some cases the high and low part of the pmdval returned may not be
+ * consistent if THP is enabled (the low part may point to previously
+ * mapped hugepage, while the high part may point to a more recently
+ * mapped hugepage), but pmd_none_or_trans_huge_or_clear_bad() only
+ * needs the low part of the pmd to be read atomically to decide if the
+ * pmd is unstable or not, with the only exception when the low part
+ * of the pmd is zero, in which case we return a 'none' pmd.
  */
 static inline pmd_t pmd_read_atomic(pmd_t *pmdp)
 {
