From: Mike Willard <mwillard@izotope.com>
To: mwillard@izotope.com
Cc: Brian Austin <brian.austin@cirrus.com>,
Paul Handrigan <Paul.Handrigan@cirrus.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>,
Takashi Iwai <tiwai@suse.com>,
alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org
Subject: [PATCH] ASoC: cs4270: pull reset GPIO low then high
Date: Wed, 1 Apr 2020 20:54:54 +0000 [thread overview]
Message-ID: <20200401205454.79792-1-mwillard@izotope.com> (raw)
Pull the RST line low then high when initializing the driver,
in order to force a reset of the chip.
Previously, the line was not pulled low, which could result in
the chip registers not resetting to their default values on boot.
Signed-off-by: Mike Willard <mwillard@izotope.com>
---
sound/soc/codecs/cs4270.c | 40 ++++++++++++++++++++++++++++++++++-----
1 file changed, 35 insertions(+), 5 deletions(-)
diff --git a/sound/soc/codecs/cs4270.c b/sound/soc/codecs/cs4270.c
index 5f25b9f872bd..8a02791e44ad 100644
--- a/sound/soc/codecs/cs4270.c
+++ b/sound/soc/codecs/cs4270.c
@@ -137,6 +137,9 @@ struct cs4270_private {
/* power domain regulators */
struct regulator_bulk_data supplies[ARRAY_SIZE(supply_names)];
+
+ /* reset gpio */
+ struct gpio_desc *reset_gpio;
};
static const struct snd_soc_dapm_widget cs4270_dapm_widgets[] = {
@@ -648,6 +651,22 @@ static const struct regmap_config cs4270_regmap = {
.volatile_reg = cs4270_reg_is_volatile,
};
+/**
+ * cs4270_i2c_remove - deinitialize the I2C interface of the CS4270
+ * @i2c_client: the I2C client object
+ *
+ * This function puts the chip into low power mode when the i2c device
+ * is removed.
+ */
+static int cs4270_i2c_remove(struct i2c_client *i2c_client)
+{
+ struct cs4270_private *cs4270 = i2c_get_clientdata(i2c_client);
+
+ gpiod_set_value_cansleep(cs4270->reset_gpio, 0);
+
+ return 0;
+}
+
/**
* cs4270_i2c_probe - initialize the I2C interface of the CS4270
* @i2c_client: the I2C client object
@@ -660,7 +679,6 @@ static int cs4270_i2c_probe(struct i2c_client *i2c_client,
const struct i2c_device_id *id)
{
struct cs4270_private *cs4270;
- struct gpio_desc *reset_gpiod;
unsigned int val;
int ret, i;
@@ -679,10 +697,21 @@ static int cs4270_i2c_probe(struct i2c_client *i2c_client,
if (ret < 0)
return ret;
- reset_gpiod = devm_gpiod_get_optional(&i2c_client->dev, "reset",
- GPIOD_OUT_HIGH);
- if (PTR_ERR(reset_gpiod) == -EPROBE_DEFER)
- return -EPROBE_DEFER;
+ /* reset the device */
+ cs4270->reset_gpio = devm_gpiod_get_optional(&i2c_client->dev, "reset",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(cs4270->reset_gpio)) {
+ dev_dbg(&i2c_client->dev, "Error getting CS4270 reset GPIO\n");
+ return PTR_ERR(cs4270->reset_gpio);
+ }
+
+ if (cs4270->reset_gpio) {
+ dev_dbg(&i2c_client->dev, "Found reset GPIO\n");
+ gpiod_set_value_cansleep(cs4270->reset_gpio, 1);
+ }
+
+ /* Sleep 500ns before i2c communications */
+ ndelay(500);
cs4270->regmap = devm_regmap_init_i2c(i2c_client, &cs4270_regmap);
if (IS_ERR(cs4270->regmap))
@@ -735,6 +764,7 @@ static struct i2c_driver cs4270_i2c_driver = {
},
.id_table = cs4270_id,
.probe = cs4270_i2c_probe,
+ .remove = cs4270_i2c_remove,
};
module_i2c_driver(cs4270_i2c_driver);
--
2.17.1
next reply other threads:[~2020-04-01 20:55 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-01 20:54 Mike Willard [this message]
2020-04-07 14:30 ` Applied "ASoC: cs4270: pull reset GPIO low then high" to the asoc tree Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200401205454.79792-1-mwillard@izotope.com \
--to=mwillard@izotope.com \
--cc=Paul.Handrigan@cirrus.com \
--cc=alsa-devel@alsa-project.org \
--cc=brian.austin@cirrus.com \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=perex@perex.cz \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).