From: Serge Semin <Sergey.Semin@baikalelectronics.ru>
To: Jarkko Nikula <jarkko.nikula@linux.intel.com>,
Wolfram Sang <wsa@the-dreams.de>
Cc: Serge Semin <Sergey.Semin@baikalelectronics.ru>,
Serge Semin <fancer.lancer@gmail.com>,
Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>,
Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Mika Westerberg <mika.westerberg@linux.intel.com>,
Rob Herring <robh+dt@kernel.org>, <linux-mips@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-i2c@vger.kernel.org>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH v4 06/11] i2c: designware: Add Baytrail sem config DW I2C platform dependency
Date: Wed, 27 May 2020 15:01:06 +0300 [thread overview]
Message-ID: <20200527120111.5781-7-Sergey.Semin@baikalelectronics.ru> (raw)
In-Reply-To: <20200527120111.5781-1-Sergey.Semin@baikalelectronics.ru>
Currently Intel Baytrail I2C semaphore is a feature of the DW APB I2C
platform driver. It's a bit confusing to see it's config in the menu at
some separated place with no reference to the platform code. Let's move the
config definition to be below the I2C_DESIGNWARE_PLATFORM config and mark
it with "depends on I2C_DESIGNWARE_PLATFORM" statement. By doing so the
config menu will display the feature right below the DW I2C platform
driver item and will indent it to the right so signifying its belonging.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: devicetree@vger.kernel.org
---
Changelog v3:
- Replace if-endif clause around the I2C_DESIGNWARE_BAYTRAIL config
with "depends on" operator.
---
drivers/i2c/busses/Kconfig | 23 ++++++++++++-----------
1 file changed, 12 insertions(+), 11 deletions(-)
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 7f92f6a96042..7cd279c36898 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -549,20 +549,10 @@ config I2C_DESIGNWARE_PLATFORM
This driver can also be built as a module. If so, the module
will be called i2c-designware-platform.
-config I2C_DESIGNWARE_PCI
- tristate "Synopsys DesignWare PCI"
- depends on PCI
- select I2C_DESIGNWARE_CORE
- help
- If you say yes to this option, support will be included for the
- Synopsys DesignWare I2C adapter. Only master mode is supported.
-
- This driver can also be built as a module. If so, the module
- will be called i2c-designware-pci.
-
config I2C_DESIGNWARE_BAYTRAIL
bool "Intel Baytrail I2C semaphore support"
depends on ACPI
+ depends on I2C_DESIGNWARE_PLATFORM
depends on (I2C_DESIGNWARE_PLATFORM=m && IOSF_MBI) || \
(I2C_DESIGNWARE_PLATFORM=y && IOSF_MBI=y)
help
@@ -572,6 +562,17 @@ config I2C_DESIGNWARE_BAYTRAIL
the platform firmware controlling it. You should say Y if running on
a BayTrail system using the AXP288.
+config I2C_DESIGNWARE_PCI
+ tristate "Synopsys DesignWare PCI"
+ depends on PCI
+ select I2C_DESIGNWARE_CORE
+ help
+ If you say yes to this option, support will be included for the
+ Synopsys DesignWare I2C adapter. Only master mode is supported.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-designware-pci.
+
config I2C_DIGICOLOR
tristate "Conexant Digicolor I2C driver"
depends on ARCH_DIGICOLOR || COMPILE_TEST
--
2.26.2
next prev parent reply other threads:[~2020-05-27 12:08 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-27 12:01 [PATCH v4 00/11] i2c: designeware: Add Baikal-T1 System I2C support Serge Semin
2020-05-27 12:01 ` [PATCH v4 01/11] dt-bindings: i2c: Convert DW I2C binding to DT schema Serge Semin
2020-05-27 12:01 ` [PATCH v4 02/11] dt-bindings: i2c: Discard i2c-slave flag from the DW I2C example Serge Semin
2020-05-27 17:12 ` Rob Herring
2020-05-27 17:18 ` Serge Semin
2020-05-27 17:56 ` Andy Shevchenko
2020-05-28 8:39 ` Serge Semin
2020-05-28 10:00 ` Andy Shevchenko
2020-05-27 12:01 ` [PATCH v4 03/11] dt-bindings: i2c: dw: Add Baikal-T1 SoC I2C controller Serge Semin
2020-05-27 12:01 ` [PATCH v4 04/11] i2c: designware: Use `-y` to build multi-object modules Serge Semin
2020-05-27 12:01 ` [PATCH v4 05/11] i2c: designware: slave: Set DW I2C core module dependency Serge Semin
2020-05-27 12:01 ` Serge Semin [this message]
2020-05-27 13:42 ` [PATCH v4 06/11] i2c: designware: Add Baytrail sem config DW I2C platform dependency Andy Shevchenko
2020-05-27 14:24 ` Serge Semin
2020-05-27 15:46 ` Andy Shevchenko
2020-05-27 16:00 ` Serge Semin
2020-05-27 16:43 ` Andy Shevchenko
2020-05-27 12:01 ` [PATCH v4 07/11] i2c: designware: Discard Cherry Trail model flag Serge Semin
2020-05-27 13:43 ` Andy Shevchenko
2020-05-27 14:29 ` Serge Semin
2020-05-27 15:48 ` Andy Shevchenko
2020-05-27 12:01 ` [PATCH v4 08/11] i2c: designware: Convert driver to using regmap API Serge Semin
2020-05-27 13:50 ` Andy Shevchenko
2020-05-27 14:39 ` Serge Semin
2020-05-27 12:01 ` [PATCH v4 09/11] i2c: designware: Retrieve quirk flags as early as possible Serge Semin
2020-05-27 13:51 ` Andy Shevchenko
2020-05-27 12:01 ` [PATCH v4 10/11] i2c: designware: Move reg-space remapping into a dedicated function Serge Semin
2020-05-27 13:58 ` Andy Shevchenko
2020-05-27 14:54 ` Serge Semin
2020-05-27 12:01 ` [PATCH v4 11/11] i2c: designware: Add Baikal-T1 System I2C support Serge Semin
2020-05-27 14:03 ` Andy Shevchenko
2020-05-27 15:04 ` Serge Semin
2020-05-27 15:52 ` Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200527120111.5781-7-Sergey.Semin@baikalelectronics.ru \
--to=sergey.semin@baikalelectronics.ru \
--cc=Alexey.Malahov@baikalelectronics.ru \
--cc=andriy.shevchenko@linux.intel.com \
--cc=devicetree@vger.kernel.org \
--cc=fancer.lancer@gmail.com \
--cc=jarkko.nikula@linux.intel.com \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=mika.westerberg@linux.intel.com \
--cc=robh+dt@kernel.org \
--cc=tsbogend@alpha.franken.de \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).