From: Matt Helsley <mhelsley@vmware.com>
To: <linux-kernel@vger.kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>,
Peter Zijlstra <peterz@infradead.org>,
Steven Rostedt <rostedt@goodmis.org>,
Sami Tolvanen <samitolvanen@google.com>,
Julien Thierry <jthierry@redhat.com>,
Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>,
Matt Helsley <mhelsley@vmware.com>
Subject: [RFC][PATCH v4 31/32] objtool: mcount: Remove endian wrappers
Date: Tue, 2 Jun 2020 12:50:24 -0700 [thread overview]
Message-ID: <a985a2b1464c0f73469d1befc3f8676f95a7d7c1.1591125127.git.mhelsley@vmware.com> (raw)
In-Reply-To: <cover.1591125127.git.mhelsley@vmware.com>
Now that they're no longer used we can remove these endian
wrappers.
Signed-off-by: Matt Helsley <mhelsley@vmware.com>
---
tools/objtool/recordmcount.c | 63 ------------------------------------
1 file changed, 63 deletions(-)
diff --git a/tools/objtool/recordmcount.c b/tools/objtool/recordmcount.c
index 6980c0a8bdc3..aa2f6a64bff0 100644
--- a/tools/objtool/recordmcount.c
+++ b/tools/objtool/recordmcount.c
@@ -149,53 +149,6 @@ static int make_nop_arm64(struct section *txts, size_t const offset)
return 0;
}
-/* w8rev, w8nat, ...: Handle endianness. */
-
-static uint64_t w8rev(uint64_t const x)
-{
- return ((0xff & (x >> (0 * 8))) << (7 * 8))
- | ((0xff & (x >> (1 * 8))) << (6 * 8))
- | ((0xff & (x >> (2 * 8))) << (5 * 8))
- | ((0xff & (x >> (3 * 8))) << (4 * 8))
- | ((0xff & (x >> (4 * 8))) << (3 * 8))
- | ((0xff & (x >> (5 * 8))) << (2 * 8))
- | ((0xff & (x >> (6 * 8))) << (1 * 8))
- | ((0xff & (x >> (7 * 8))) << (0 * 8));
-}
-
-static uint32_t w4rev(uint32_t const x)
-{
- return ((0xff & (x >> (0 * 8))) << (3 * 8))
- | ((0xff & (x >> (1 * 8))) << (2 * 8))
- | ((0xff & (x >> (2 * 8))) << (1 * 8))
- | ((0xff & (x >> (3 * 8))) << (0 * 8));
-}
-
-static uint32_t w2rev(uint16_t const x)
-{
- return ((0xff & (x >> (0 * 8))) << (1 * 8))
- | ((0xff & (x >> (1 * 8))) << (0 * 8));
-}
-
-static uint64_t w8nat(uint64_t const x)
-{
- return x;
-}
-
-static uint32_t w4nat(uint32_t const x)
-{
- return x;
-}
-
-static uint32_t w2nat(uint16_t const x)
-{
- return x;
-}
-
-static uint64_t (*w8)(uint64_t);
-static uint32_t (*w)(uint32_t);
-static uint32_t (*w2)(uint16_t);
-
/* Names of the sections that could contain calls to mcount. */
static int is_mcounted_section_name(char const *const txtname)
{
@@ -579,22 +532,12 @@ static int do_file(char const *const fname)
goto out;
}
- w = w4nat;
- w2 = w2nat;
- w8 = w8nat;
switch (lf->ehdr.e_ident[EI_DATA]) {
- static unsigned int const endian = 1;
default:
fprintf(stderr, "unrecognized ELF data encoding %d: %s\n",
lf->ehdr.e_ident[EI_DATA], fname);
goto out;
case ELFDATA2LSB:
- if (*(unsigned char const *)&endian != 1) {
- /* objtool is big endian, file.o is little endian. */
- w = w4rev;
- w2 = w2rev;
- w8 = w8rev;
- }
ideal_nop4_arm = ideal_nop4_arm_le;
bl_mcount_arm = bl_mcount_arm_le;
push_arm = push_arm_le;
@@ -602,12 +545,6 @@ static int do_file(char const *const fname)
push_bl_mcount_thumb = push_bl_mcount_thumb_le;
break;
case ELFDATA2MSB:
- if (*(unsigned char const *)&endian != 0) {
- /* objtool is little endian, file.o is big endian. */
- w = w4rev;
- w2 = w2rev;
- w8 = w8rev;
- }
ideal_nop4_arm = ideal_nop4_arm_be;
bl_mcount_arm = bl_mcount_arm_be;
push_arm = push_arm_be;
--
2.20.1
next prev parent reply other threads:[~2020-06-02 19:53 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-02 19:49 [RFC][PATCH v4 00/32] objtool: Make recordmcount a subcommand Matt Helsley
2020-06-02 19:49 ` [RFC][PATCH v4 01/32] objtool: Prepare to merge recordmcount Matt Helsley
2020-06-09 8:54 ` Julien Thierry
2020-06-09 15:42 ` Matt Helsley
2020-06-09 19:31 ` Julien Thierry
2020-06-02 19:49 ` [RFC][PATCH v4 02/32] objtool: Make recordmcount into mcount subcmd Matt Helsley
2020-06-09 9:00 ` Julien Thierry
2020-06-09 18:39 ` Matt Helsley
2020-06-09 18:52 ` Steven Rostedt
2020-06-09 18:56 ` Matt Helsley
2020-06-09 19:11 ` Julien Thierry
2020-06-02 19:49 ` [RFC][PATCH v4 03/32] objtool: recordmcount: Start using objtool's elf wrapper Matt Helsley
2020-06-02 19:49 ` [RFC][PATCH v4 04/32] objtool: recordmcount: Search for __mcount_loc before walking the sections Matt Helsley
2020-06-02 19:49 ` [RFC][PATCH v4 05/32] objtool: recordmcount: Convert do_func() relhdrs Matt Helsley
2020-06-02 19:49 ` [RFC][PATCH v4 06/32] objtool: mcount: Remove unused fname parameter Matt Helsley
2020-06-02 19:50 ` [RFC][PATCH v4 07/32] objtool: mcount: Use libelf for section header names Matt Helsley
2020-06-02 19:50 ` [RFC][PATCH v4 08/32] objtool: mcount: Walk objtool Elf structs in find_secsym_ndx Matt Helsley
2020-06-02 19:50 ` [RFC][PATCH v4 09/32] objtool: mcount: Use symbol structs to find mcount relocations Matt Helsley
2020-06-02 19:50 ` [RFC][PATCH v4 10/32] objtool: mcount: Walk relocation lists Matt Helsley
2020-06-02 19:50 ` [RFC][PATCH v4 11/32] objtool: mcount: Move get_mcountsym Matt Helsley
2020-06-02 19:50 ` [RFC][PATCH v4 12/32] objtool: mcount: Replace MIPS offset types Matt Helsley
2020-06-02 19:50 ` [RFC][PATCH v4 13/32] objtool: mcount: Move is_fake_mcount() Matt Helsley
2020-06-02 19:50 ` [RFC][PATCH v4 14/32] objtool: mcount: Stop using ehdr in find_section_sym_index Matt Helsley
2020-06-02 19:50 ` [RFC][PATCH v4 15/32] objtool: mcount: Move find_section_sym_index() Matt Helsley
2020-06-02 19:50 ` [RFC][PATCH v4 16/32] objtool: mcount: Restrict using ehdr in append_func() Matt Helsley
2020-06-02 19:50 ` [RFC][PATCH v4 17/32] objtool: mcount: Use objtool ELF to write Matt Helsley
2020-06-02 19:50 ` [RFC][PATCH v4 18/32] objtool: mcount: Move nop_mcount() Matt Helsley
2020-06-12 13:26 ` Peter Zijlstra
2020-06-12 16:05 ` Peter Zijlstra
2020-06-17 17:36 ` Matt Helsley
2020-06-17 18:30 ` Peter Zijlstra
2020-06-13 19:49 ` Matt Helsley
2020-06-02 19:50 ` [RFC][PATCH v4 19/32] objtool: mcount: Move has_rel_mcount() and tot_relsize() Matt Helsley
2020-06-02 19:50 ` [RFC][PATCH v4 20/32] objtool: mcount: Move relocation entry size detection Matt Helsley
2020-06-02 19:50 ` [RFC][PATCH v4 21/32] objtool: mcount: Only keep ELF file size Matt Helsley
2020-06-02 19:50 ` [RFC][PATCH v4 22/32] objtool: mcount: Use ELF header from objtool Matt Helsley
2020-06-02 19:50 ` [RFC][PATCH v4 23/32] objtool: mcount: Remove unused file mapping Matt Helsley
2020-06-02 19:50 ` [RFC][PATCH v4 24/32] objtool: mcount: Reduce usage of _size wrapper Matt Helsley
2020-06-02 19:50 ` [RFC][PATCH v4 25/32] objtool: mcount: Move mcount_adjust out of wrapper Matt Helsley
2020-06-02 19:50 ` [RFC][PATCH v4 26/32] objtool: mcount: Pre-allocate new ELF sections Matt Helsley
2020-06-02 19:50 ` [RFC][PATCH v4 27/32] objtool: mcount: Generic location and relocation table types Matt Helsley
2020-06-09 6:41 ` Kamalesh Babulal
2020-06-09 18:12 ` Matt Helsley
2020-06-10 4:35 ` Kamalesh Babulal
2020-06-02 19:50 ` [RFC][PATCH v4 28/32] objtool: mcount: Move sift_rel_mcount out of wrapper file Matt Helsley
2020-06-02 19:50 ` [RFC][PATCH v4 29/32] objtool: mcount: Remove wrapper for ELF relocation type Matt Helsley
2020-06-02 19:50 ` [RFC][PATCH v4 30/32] objtool: mcount: Remove wrapper double-include trick Matt Helsley
2020-06-02 19:50 ` Matt Helsley [this message]
2020-06-02 19:50 ` [RFC][PATCH v4 32/32] objtool: mcount: Rename Matt Helsley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a985a2b1464c0f73469d1befc3f8676f95a7d7c1.1591125127.git.mhelsley@vmware.com \
--to=mhelsley@vmware.com \
--cc=jpoimboe@redhat.com \
--cc=jthierry@redhat.com \
--cc=kamalesh@linux.vnet.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=peterz@infradead.org \
--cc=rostedt@goodmis.org \
--cc=samitolvanen@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).