From: Ezequiel Garcia <ezequiel@collabora.com>
To: linux-media@vger.kernel.org, linux-rockchip@lists.infradead.org,
linux-kernel@vger.kernel.org
Cc: kernel@collabora.com, Hans Verkuil <hverkuil@xs4all.nl>,
Philipp Zabel <p.zabel@pengutronix.de>,
Ezequiel Garcia <ezequiel@collabora.com>
Subject: [PATCH 5/6] hantro: Remove unused bytesused argument
Date: Thu, 25 Jun 2020 13:35:24 -0300 [thread overview]
Message-ID: <20200625163525.5119-6-ezequiel@collabora.com> (raw)
In-Reply-To: <20200625163525.5119-1-ezequiel@collabora.com>
The driver doesn't need the bytesused argument.
For decoders, the plane bytesused is known and therefore,
buf_prepare is used to set it. For encoders, it's
handled by the codec_ops.done hook.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
---
drivers/staging/media/hantro/hantro_drv.c | 9 ++++-----
drivers/staging/media/hantro/hantro_hw.h | 2 +-
drivers/staging/media/hantro/imx8m_vpu_hw.c | 2 +-
drivers/staging/media/hantro/rk3288_vpu_hw.c | 7 +++----
drivers/staging/media/hantro/rk3399_vpu_hw.c | 7 +++----
5 files changed, 12 insertions(+), 15 deletions(-)
diff --git a/drivers/staging/media/hantro/hantro_drv.c b/drivers/staging/media/hantro/hantro_drv.c
index d1fcf41023f9..0936f0c41af9 100644
--- a/drivers/staging/media/hantro/hantro_drv.c
+++ b/drivers/staging/media/hantro/hantro_drv.c
@@ -58,7 +58,6 @@ dma_addr_t hantro_get_ref(struct hantro_ctx *ctx, u64 ts)
static void hantro_job_finish(struct hantro_dev *vpu,
struct hantro_ctx *ctx,
- unsigned int bytesused,
enum vb2_buffer_state result)
{
struct vb2_v4l2_buffer *src, *dst;
@@ -82,7 +81,7 @@ static void hantro_job_finish(struct hantro_dev *vpu,
result);
}
-void hantro_irq_done(struct hantro_dev *vpu, unsigned int bytesused,
+void hantro_irq_done(struct hantro_dev *vpu,
enum vb2_buffer_state result)
{
struct hantro_ctx *ctx =
@@ -96,7 +95,7 @@ void hantro_irq_done(struct hantro_dev *vpu, unsigned int bytesused,
if (cancel_delayed_work(&vpu->watchdog_work)) {
if (result == VB2_BUF_STATE_DONE && ctx->codec_ops->done)
ctx->codec_ops->done(ctx);
- hantro_job_finish(vpu, ctx, bytesused, result);
+ hantro_job_finish(vpu, ctx, result);
}
}
@@ -111,7 +110,7 @@ void hantro_watchdog(struct work_struct *work)
if (ctx) {
vpu_err("frame processing timed out!\n");
ctx->codec_ops->reset(ctx);
- hantro_job_finish(vpu, ctx, 0, VB2_BUF_STATE_ERROR);
+ hantro_job_finish(vpu, ctx, VB2_BUF_STATE_ERROR);
}
}
@@ -164,7 +163,7 @@ static void device_run(void *priv)
return;
err_cancel_job:
- hantro_job_finish(ctx->dev, ctx, 0, VB2_BUF_STATE_ERROR);
+ hantro_job_finish(ctx->dev, ctx, VB2_BUF_STATE_ERROR);
}
bool hantro_is_encoder_ctx(const struct hantro_ctx *ctx)
diff --git a/drivers/staging/media/hantro/hantro_hw.h b/drivers/staging/media/hantro/hantro_hw.h
index 2d6323cd6732..f066de6b592d 100644
--- a/drivers/staging/media/hantro/hantro_hw.h
+++ b/drivers/staging/media/hantro/hantro_hw.h
@@ -163,7 +163,7 @@ extern const u32 hantro_vp8_dec_mc_filter[8][6];
void hantro_watchdog(struct work_struct *work);
void hantro_run(struct hantro_ctx *ctx);
-void hantro_irq_done(struct hantro_dev *vpu, unsigned int bytesused,
+void hantro_irq_done(struct hantro_dev *vpu,
enum vb2_buffer_state result);
void hantro_start_prepare_run(struct hantro_ctx *ctx);
void hantro_end_prepare_run(struct hantro_ctx *ctx);
diff --git a/drivers/staging/media/hantro/imx8m_vpu_hw.c b/drivers/staging/media/hantro/imx8m_vpu_hw.c
index cb2420c5526e..c222de075ef4 100644
--- a/drivers/staging/media/hantro/imx8m_vpu_hw.c
+++ b/drivers/staging/media/hantro/imx8m_vpu_hw.c
@@ -143,7 +143,7 @@ static irqreturn_t imx8m_vpu_g1_irq(int irq, void *dev_id)
vdpu_write(vpu, 0, G1_REG_INTERRUPT);
vdpu_write(vpu, G1_REG_CONFIG_DEC_CLK_GATE_E, G1_REG_CONFIG);
- hantro_irq_done(vpu, 0, state);
+ hantro_irq_done(vpu, state);
return IRQ_HANDLED;
}
diff --git a/drivers/staging/media/hantro/rk3288_vpu_hw.c b/drivers/staging/media/hantro/rk3288_vpu_hw.c
index b1cf2abb972f..7b299ee3e93d 100644
--- a/drivers/staging/media/hantro/rk3288_vpu_hw.c
+++ b/drivers/staging/media/hantro/rk3288_vpu_hw.c
@@ -113,17 +113,16 @@ static irqreturn_t rk3288_vepu_irq(int irq, void *dev_id)
{
struct hantro_dev *vpu = dev_id;
enum vb2_buffer_state state;
- u32 status, bytesused;
+ u32 status;
status = vepu_read(vpu, H1_REG_INTERRUPT);
- bytesused = vepu_read(vpu, H1_REG_STR_BUF_LIMIT) / 8;
state = (status & H1_REG_INTERRUPT_FRAME_RDY) ?
VB2_BUF_STATE_DONE : VB2_BUF_STATE_ERROR;
vepu_write(vpu, 0, H1_REG_INTERRUPT);
vepu_write(vpu, 0, H1_REG_AXI_CTRL);
- hantro_irq_done(vpu, bytesused, state);
+ hantro_irq_done(vpu, state);
return IRQ_HANDLED;
}
@@ -141,7 +140,7 @@ static irqreturn_t rk3288_vdpu_irq(int irq, void *dev_id)
vdpu_write(vpu, 0, G1_REG_INTERRUPT);
vdpu_write(vpu, G1_REG_CONFIG_DEC_CLK_GATE_E, G1_REG_CONFIG);
- hantro_irq_done(vpu, 0, state);
+ hantro_irq_done(vpu, state);
return IRQ_HANDLED;
}
diff --git a/drivers/staging/media/hantro/rk3399_vpu_hw.c b/drivers/staging/media/hantro/rk3399_vpu_hw.c
index 9ac1f2cb6a16..7a7962cf771e 100644
--- a/drivers/staging/media/hantro/rk3399_vpu_hw.c
+++ b/drivers/staging/media/hantro/rk3399_vpu_hw.c
@@ -92,17 +92,16 @@ static irqreturn_t rk3399_vepu_irq(int irq, void *dev_id)
{
struct hantro_dev *vpu = dev_id;
enum vb2_buffer_state state;
- u32 status, bytesused;
+ u32 status;
status = vepu_read(vpu, VEPU_REG_INTERRUPT);
- bytesused = vepu_read(vpu, VEPU_REG_STR_BUF_LIMIT) / 8;
state = (status & VEPU_REG_INTERRUPT_FRAME_READY) ?
VB2_BUF_STATE_DONE : VB2_BUF_STATE_ERROR;
vepu_write(vpu, 0, VEPU_REG_INTERRUPT);
vepu_write(vpu, 0, VEPU_REG_AXI_CTRL);
- hantro_irq_done(vpu, bytesused, state);
+ hantro_irq_done(vpu, state);
return IRQ_HANDLED;
}
@@ -120,7 +119,7 @@ static irqreturn_t rk3399_vdpu_irq(int irq, void *dev_id)
vdpu_write(vpu, 0, VDPU_REG_INTERRUPT);
vdpu_write(vpu, 0, VDPU_REG_AXI_CTRL);
- hantro_irq_done(vpu, 0, state);
+ hantro_irq_done(vpu, state);
return IRQ_HANDLED;
}
--
2.26.0.rc2
next prev parent reply other threads:[~2020-06-25 16:39 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-25 16:35 [PATCH 0/6] Hantro low-hanging cleanups Ezequiel Garcia
2020-06-25 16:35 ` [PATCH 1/6] hantro: h264: Remove unused macro definition Ezequiel Garcia
2020-06-25 16:35 ` [PATCH 2/6] hantro: h264: Rename scaling list handling function Ezequiel Garcia
2020-06-25 16:35 ` [PATCH 3/6] hantro: Rework how encoder and decoder are identified Ezequiel Garcia
2020-06-26 7:58 ` Philipp Zabel
2020-06-26 18:30 ` Ezequiel Garcia
2020-06-26 9:52 ` Robin Murphy
2020-06-26 18:31 ` Ezequiel Garcia
2020-06-25 16:35 ` [PATCH 4/6] hantro: Move hantro_enc_buf_finish to JPEG codec_ops.done Ezequiel Garcia
2020-06-25 16:35 ` Ezequiel Garcia [this message]
2020-06-25 16:35 ` [PATCH 6/6] hantro: Make sure we don't use post-processor on an encoder Ezequiel Garcia
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200625163525.5119-6-ezequiel@collabora.com \
--to=ezequiel@collabora.com \
--cc=hverkuil@xs4all.nl \
--cc=kernel@collabora.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=p.zabel@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).