From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: "Pavel Machek" <pavel@ucw.cz>, "Dan Murphy" <dmurphy@ti.com>,
"Rob Herring" <robh+dt@kernel.org>,
"Andy Gross" <agross@kernel.org>,
"Bjorn Andersson" <bjorn.andersson@linaro.org>,
"Thierry Reding" <thierry.reding@gmail.com>,
"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
"Lee Jones" <lee.jones@linaro.org>,
"Martin Botka" <martin.botka1@gmail.com>
Cc: linux-leds@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
linux-pwm@vger.kernel.org
Subject: [PATCH v6 1/4] dt-bindings: leds: Add Qualcomm Light Pulse Generator binding
Date: Wed, 21 Oct 2020 13:12:21 -0700 [thread overview]
Message-ID: <20201021201224.3430546-2-bjorn.andersson@linaro.org> (raw)
In-Reply-To: <20201021201224.3430546-1-bjorn.andersson@linaro.org>
This adds the binding document describing the three hardware blocks
related to the Light Pulse Generator found in a wide range of Qualcomm
PMICs.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
Changes since v5:
- None
.../bindings/leds/leds-qcom-lpg.yaml | 170 ++++++++++++++++++
1 file changed, 170 insertions(+)
create mode 100644 Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml
diff --git a/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml
new file mode 100644
index 000000000000..5ccf0f3d8f1b
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml
@@ -0,0 +1,170 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-qcom-lpg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Light Pulse Generator
+
+maintainers:
+ - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: >
+ The Qualcomm Light Pulse Generator consists of three different hardware blocks;
+ a ramp generator with lookup table, the light pulse generator and a three
+ channel current sink. These blocks are found in a wide range of Qualcomm PMICs.
+
+properties:
+ compatible:
+ enum:
+ - qcom,pm8916-pwm
+ - qcom,pm8941-lpg
+ - qcom,pm8994-lpg
+ - qcom,pmi8994-lpg
+ - qcom,pmi8998-lpg
+
+ "#pwm-cells":
+ const: 2
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ qcom,power-source:
+ $ref: /schemas/types.yaml#definitions/uint32
+ description: >
+ power-source used to drive the output, as defined in the datasheet.
+ Should be specified if the TRILED block is present
+ enum:
+ - 0
+ - 1
+ - 3
+
+ multi-led:
+ type: object
+ $ref: leds-class-multicolor.yaml#
+ properties:
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ "^led@[0-9a-f]$":
+ type: object
+ $ref: common.yaml#
+
+ properties:
+ "qcom,dtest":
+ $ref: /schemas/types.yaml#definitions/uint32-array
+ description: >
+ configures the output into an internal test line of the pmic. Specified
+ by a list of u32 pairs, one pair per channel, where each pair denotes the
+ test line to drive and the second configures how the value should be
+ outputed, as defined in the datasheet
+ minItems: 2
+ maxItems: 2
+
+ required:
+ - reg
+
+patternProperties:
+ "^led@[0-9a-f]$":
+ type: object
+ $ref: common.yaml#
+ properties:
+ "qcom,dtest":
+ $ref: /schemas/types.yaml#definitions/uint32-array
+ description: >
+ configures the output into an internal test line of the pmic. Specified
+ by a list of u32 pairs, one pair per channel, where each pair denotes the
+ test line to drive and the second configures how the value should be
+ outputed, as defined in the datasheet
+ minItems: 2
+ maxItems: 2
+
+ required:
+ - reg
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/leds/common.h>
+
+ lpg {
+ compatible = "qcom,pmi8994-lpg";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ qcom,power-source = <1>;
+
+ led@1 {
+ reg = <1>;
+ label = "green:user1";
+ };
+
+ led@2 {
+ reg = <2>;
+ label = "green:user0";
+ default-state = "on";
+ };
+
+ led@3 {
+ reg = <3>;
+ label = "green:user2";
+ };
+
+ led@4 {
+ reg = <4>;
+ label = "green:user3";
+
+ qcom,dtest = <4 1>;
+ };
+ };
+ - |
+ #include <dt-bindings/leds/common.h>
+
+ lpg {
+ compatible = "qcom,pmi8994-lpg";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ qcom,power-source = <1>;
+
+ multi-led {
+ color = <LED_COLOR_ID_MULTI>;
+ label = "rgb:notification";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led@3 {
+ reg = <3>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+ };
+ };
+ - |
+ lpg {
+ compatible = "qcom,pm8916-pwm";
+ #pwm-cells = <2>;
+ };
+...
--
2.28.0
next prev parent reply other threads:[~2020-10-21 20:12 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-21 20:12 [PATCH v6 0/4] Qualcomm Light Pulse Generator Bjorn Andersson
2020-10-21 20:12 ` Bjorn Andersson [this message]
2020-10-26 15:02 ` [PATCH v6 1/4] dt-bindings: leds: Add Qualcomm Light Pulse Generator binding Rob Herring
2020-10-21 20:12 ` [PATCH v6 2/4] leds: Add driver for Qualcomm LPG Bjorn Andersson
2020-10-22 19:25 ` Luca Weiss
2020-10-29 18:13 ` Pavel Machek
2021-04-29 0:12 ` Bjorn Andersson
2021-04-29 21:12 ` Pavel Machek
2021-04-29 21:29 ` Bjorn Andersson
2021-05-04 15:43 ` Pavel Machek
2021-05-04 16:13 ` Bjorn Andersson
2021-05-05 5:21 ` Uwe Kleine-König
2021-04-18 21:54 ` Marijn Suijten
2021-04-28 22:39 ` Bjorn Andersson
2021-04-29 19:31 ` Marijn Suijten
2021-04-29 20:54 ` Bjorn Andersson
2021-05-05 5:15 ` Uwe Kleine-König
2021-05-05 5:19 ` Uwe Kleine-König
2021-05-13 17:43 ` Bjorn Andersson
2020-10-21 20:12 ` [PATCH v6 3/4] arm64: dts: qcom: pm(i)8994: Add mpp and lpg blocks Bjorn Andersson
2020-10-21 20:12 ` [PATCH v6 4/4] arm64: dts: qcom: Add user LEDs on db820c Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201021201224.3430546-2-bjorn.andersson@linaro.org \
--to=bjorn.andersson@linaro.org \
--cc=agross@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmurphy@ti.com \
--cc=lee.jones@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-leds@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=martin.botka1@gmail.com \
--cc=pavel@ucw.cz \
--cc=robh+dt@kernel.org \
--cc=thierry.reding@gmail.com \
--cc=u.kleine-koenig@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).