linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Adam Ford <aford173@gmail.com>
To: linux-arm-kernel@lists.infradead.org
Cc: marex@denx.de, l.stach@pengutronix.de, aford@beaconembedded.com,
	Adam Ford <aford173@gmail.com>, Rob Herring <robh+dt@kernel.org>,
	Shawn Guo <shawnguo@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	NXP Linux Team <linux-imx@nxp.com>,
	Andrey Smirnov <andrew.smirnov@gmail.com>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 3/4] arm64: dts: imx8mn: add GPC node and power domains
Date: Thu, 22 Oct 2020 10:08:06 -0500	[thread overview]
Message-ID: <20201022150808.763082-4-aford173@gmail.com> (raw)
In-Reply-To: <20201022150808.763082-1-aford173@gmail.com>

This adds the DT nodes to describe the power domains available on the
i.MX8MN. There are four power domains, but the displaymix and mipi
power domains need a separate clock block controller which is also
pending for 8MP and 8MM. Once the path for those is clear, Nano will
need something similar, but the registers for Nano differ.  For now,
the dispmix and mipi are placeholders.

Signed-off-by: Adam Ford <aford173@gmail.com>

diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index 9b4baf7bdfb1..27733fbe87e9 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -596,6 +596,55 @@ src: reset-controller@30390000 {
 				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 				#reset-cells = <1>;
 			};
+
+			gpc: gpc@303a0000 {
+				compatible = "fsl,imx8mn-gpc";
+				reg = <0x303a0000 0x10000>;
+				interrupt-parent = <&gic>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+
+				pgc {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					pgc_hsiomix: power-domain@0 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MN_POWER_DOMAIN_HSIOMIX>;
+						clocks = <&clk IMX8MN_CLK_USB_BUS>;
+					};
+
+					pgc_otg1: power-domain@1 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MN_POWER_DOMAIN_OTG1>;
+						power-domains = <&pgc_hsiomix>;
+					};
+
+					pgc_gpumix: power-domain@2 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MN_POWER_DOMAIN_GPUMIX>;
+						clocks = <&clk IMX8MN_CLK_GPU_CORE_ROOT>,
+							 <&clk IMX8MN_CLK_GPU_SHADER_DIV>,
+							 <&clk IMX8MN_CLK_GPU_BUS_ROOT>,
+							 <&clk IMX8MN_CLK_GPU_AHB>;
+						resets = <&src IMX8MQ_RESET_GPU_RESET>;
+					};
+
+					dispmix_pd: power-domain@3 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MN_POWER_DOMAIN_DISPMIX>;
+						clocks = <&clk IMX8MN_CLK_DISP_PIXEL_ROOT>,
+							 <&clk IMX8MN_CLK_DISP_AXI_ROOT>,
+							 <&clk IMX8MN_CLK_DISP_APB_ROOT>;
+					};
+
+					mipi_pd: power-domain@4 {
+						#power-domain-cells = <0>;
+						reg = <IMX8MN_POWER_DOMAIN_MIPI>;
+						power-domains = <&dispmix_pd>;
+					};
+				};
+			};
 		};
 
 		aips2: bus@30400000 {
-- 
2.25.1


  parent reply	other threads:[~2020-10-22 15:08 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-22 15:08 [PATCH 0/4] Add i.MX8MN power domain and fix USB Adam Ford
2020-10-22 15:08 ` [PATCH 1/4] dt-bindings: add defines for i.MX8MN power domains Adam Ford
2020-10-23  9:46   ` Krzysztof Kozlowski
2020-10-30 15:36   ` Rob Herring
2020-10-22 15:08 ` [PATCH 2/4] soc: imx: gpcv2: add support " Adam Ford
2020-10-23  9:47   ` Krzysztof Kozlowski
2020-10-22 15:08 ` Adam Ford [this message]
2020-10-23  9:52   ` [PATCH 3/4] arm64: dts: imx8mn: add GPC node and " Krzysztof Kozlowski
2020-10-23 10:56     ` Adam Ford
2020-10-22 15:08 ` [PATCH 4/4] arm64: dts: imx8mn: Add power-domain reference in USB controller Adam Ford
2020-10-23  9:55   ` Krzysztof Kozlowski
2020-10-23 11:03     ` Adam Ford
2020-10-23 11:08       ` Krzysztof Kozlowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201022150808.763082-4-aford173@gmail.com \
    --to=aford173@gmail.com \
    --cc=aford@beaconembedded.com \
    --cc=andrew.smirnov@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=l.stach@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marex@denx.de \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).