From: Ben Gardon <bgardon@google.com>
To: linux-kernel@vger.kernel.org, kvm@vger.kernel.org
Cc: Paolo Bonzini <pbonzini@redhat.com>, Peter Xu <peterx@redhat.com>,
Sean Christopherson <seanjc@google.com>,
Peter Shier <pshier@google.com>,
Peter Feiner <pfeiner@google.com>,
Junaid Shahid <junaids@google.com>,
Jim Mattson <jmattson@google.com>,
Yulei Zhang <yulei.kernel@gmail.com>,
Wanpeng Li <kernellwp@gmail.com>,
Vitaly Kuznetsov <vkuznets@redhat.com>,
Xiao Guangrong <xiaoguangrong.eric@gmail.com>,
Ben Gardon <bgardon@google.com>,
Andrew Jones <drjones@redhat.com>, Thomas Huth <thuth@redhat.com>
Subject: [PATCH v2 28/28] KVM: selftests: Disable dirty logging with vCPUs running
Date: Tue, 2 Feb 2021 10:57:34 -0800 [thread overview]
Message-ID: <20210202185734.1680553-29-bgardon@google.com> (raw)
In-Reply-To: <20210202185734.1680553-1-bgardon@google.com>
Disabling dirty logging is much more intestesting from a testing
perspective if the vCPUs are still running. This also excercises the
code-path in which collapsible SPTEs must be faulted back in at a higher
level after disabling dirty logging.
To: linux-kselftest@vger.kernel.org
CC: Peter Xu <peterx@redhat.com>
CC: Andrew Jones <drjones@redhat.com>
CC: Thomas Huth <thuth@redhat.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
---
tools/testing/selftests/kvm/dirty_log_perf_test.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/tools/testing/selftests/kvm/dirty_log_perf_test.c b/tools/testing/selftests/kvm/dirty_log_perf_test.c
index 604ccefd6e76..d44a5b8ef232 100644
--- a/tools/testing/selftests/kvm/dirty_log_perf_test.c
+++ b/tools/testing/selftests/kvm/dirty_log_perf_test.c
@@ -205,11 +205,6 @@ static void run_test(enum vm_guest_mode mode, void *arg)
}
}
- /* Tell the vcpu thread to quit */
- host_quit = true;
- for (vcpu_id = 0; vcpu_id < nr_vcpus; vcpu_id++)
- pthread_join(vcpu_threads[vcpu_id], NULL);
-
/* Disable dirty logging */
clock_gettime(CLOCK_MONOTONIC, &start);
vm_mem_region_set_flags(vm, PERF_TEST_MEM_SLOT_INDEX, 0);
@@ -217,6 +212,11 @@ static void run_test(enum vm_guest_mode mode, void *arg)
pr_info("Disabling dirty logging time: %ld.%.9lds\n",
ts_diff.tv_sec, ts_diff.tv_nsec);
+ /* Tell the vcpu thread to quit */
+ host_quit = true;
+ for (vcpu_id = 0; vcpu_id < nr_vcpus; vcpu_id++)
+ pthread_join(vcpu_threads[vcpu_id], NULL);
+
avg = timespec_div(get_dirty_log_total, p->iterations);
pr_info("Get dirty log over %lu iterations took %ld.%.9lds. (Avg %ld.%.9lds/iteration)\n",
p->iterations, get_dirty_log_total.tv_sec,
--
2.30.0.365.g02bc693789-goog
next prev parent reply other threads:[~2021-02-02 19:09 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-02 18:57 [PATCH v2 00/28] Allow parallel MMU operations with TDP MMU Ben Gardon
2021-02-02 18:57 ` [PATCH v2 01/28] KVM: x86/mmu: change TDP MMU yield function returns to match cond_resched Ben Gardon
2021-02-02 18:57 ` [PATCH v2 02/28] KVM: x86/mmu: Add comment on __tdp_mmu_set_spte Ben Gardon
2021-02-02 18:57 ` [PATCH v2 03/28] KVM: x86/mmu: Add lockdep when setting a TDP MMU SPTE Ben Gardon
2021-02-02 18:57 ` [PATCH v2 04/28] KVM: x86/mmu: Don't redundantly clear TDP MMU pt memory Ben Gardon
2021-02-02 18:57 ` [PATCH v2 05/28] KVM: x86/mmu: Factor out handling of removed page tables Ben Gardon
2021-02-02 18:57 ` [PATCH v2 06/28] locking/rwlocks: Add contention detection for rwlocks Ben Gardon
2021-02-09 20:39 ` Guenter Roeck
2021-02-09 21:46 ` Waiman Long
2021-02-09 22:25 ` Guenter Roeck
2021-02-10 0:27 ` Waiman Long
2021-02-10 0:41 ` Waiman Long
2021-02-10 6:04 ` Guenter Roeck
2021-02-10 14:57 ` Waiman Long
2021-02-10 3:32 ` Waiman Long
2021-02-10 15:15 ` Waiman Long
2021-02-02 18:57 ` [PATCH v2 07/28] sched: Add needbreak " Ben Gardon
2021-02-02 18:57 ` [PATCH v2 08/28] sched: Add cond_resched_rwlock Ben Gardon
2021-02-02 18:57 ` [PATCH v2 09/28] KVM: x86/mmu: Fix braces in kvm_recover_nx_lpages Ben Gardon
2021-02-02 18:57 ` [PATCH v2 10/28] KVM: x86/mmu: Fix TDP MMU zap collapsible SPTEs Ben Gardon
2021-02-03 9:43 ` Paolo Bonzini
2021-02-02 18:57 ` [PATCH v2 11/28] KVM: x86/mmu: Merge flush and non-flush tdp_mmu_iter_cond_resched Ben Gardon
2021-02-02 18:57 ` [PATCH v2 12/28] KVM: x86/mmu: Rename goal_gfn to next_last_level_gfn Ben Gardon
2021-02-02 18:57 ` [PATCH v2 13/28] KVM: x86/mmu: Ensure forward progress when yielding in TDP MMU iter Ben Gardon
2021-02-05 23:42 ` Sean Christopherson
2021-02-02 18:57 ` [PATCH v2 14/28] KVM: x86/mmu: Yield in TDU MMU iter even if no SPTES changed Ben Gardon
2021-02-02 18:57 ` [PATCH v2 15/28] KVM: x86/mmu: Skip no-op changes in TDP MMU functions Ben Gardon
2021-02-02 18:57 ` [PATCH v2 16/28] KVM: x86/mmu: Clear dirtied pages mask bit before early break Ben Gardon
2021-02-02 18:57 ` [PATCH v2 17/28] KVM: x86/mmu: Protect TDP MMU page table memory with RCU Ben Gardon
2021-02-02 18:57 ` [PATCH v2 18/28] KVM: x86/mmu: Use an rwlock for the x86 MMU Ben Gardon
2021-02-02 18:57 ` [PATCH v2 19/28] KVM: x86/mmu: Factor out functions to add/remove TDP MMU pages Ben Gardon
2021-02-02 18:57 ` [PATCH v2 20/28] KVM: x86/mmu: Use atomic ops to set SPTEs in TDP MMU map Ben Gardon
2021-02-03 2:48 ` kernel test robot
2021-02-03 11:14 ` Paolo Bonzini
2021-02-06 0:26 ` Sean Christopherson
2021-02-08 10:32 ` Paolo Bonzini
2021-04-01 10:32 ` Paolo Bonzini
2021-04-01 16:50 ` Ben Gardon
2021-04-01 17:32 ` Paolo Bonzini
2021-04-01 18:09 ` Sean Christopherson
2021-02-02 18:57 ` [PATCH v2 21/28] KVM: x86/mmu: Flush TLBs after zap in TDP MMU PF handler Ben Gardon
2021-02-06 0:29 ` Sean Christopherson
2021-02-02 18:57 ` [PATCH v2 22/28] KVM: x86/mmu: Mark SPTEs in disconnected pages as removed Ben Gardon
2021-02-03 11:17 ` Paolo Bonzini
2021-02-02 18:57 ` [PATCH v2 23/28] KVM: x86/mmu: Allow parallel page faults for the TDP MMU Ben Gardon
2021-02-03 12:39 ` Paolo Bonzini
2021-02-03 17:46 ` Ben Gardon
2021-02-03 18:30 ` Paolo Bonzini
2021-02-06 0:12 ` Sean Christopherson
2021-02-02 18:57 ` [PATCH v2 24/28] KVM: x86/mmu: Allow zap gfn range to operate under the mmu read lock Ben Gardon
2021-02-03 11:25 ` Paolo Bonzini
2021-02-03 11:26 ` Paolo Bonzini
2021-02-03 18:31 ` Ben Gardon
2021-02-03 18:32 ` Paolo Bonzini
2021-02-02 18:57 ` [PATCH v2 25/28] KVM: x86/mmu: Allow zapping collapsible SPTEs to use MMU " Ben Gardon
2021-02-03 11:34 ` Paolo Bonzini
2021-02-03 18:51 ` Ben Gardon
2021-02-02 18:57 ` [PATCH v2 26/28] KVM: x86/mmu: Allow enabling / disabling dirty logging under " Ben Gardon
2021-02-03 11:38 ` Paolo Bonzini
2021-02-02 18:57 ` [PATCH v2 27/28] KVM: selftests: Add backing src parameter to dirty_log_perf_test Ben Gardon
2021-02-02 18:57 ` Ben Gardon [this message]
2021-02-03 10:07 ` [PATCH v2 28/28] KVM: selftests: Disable dirty logging with vCPUs running Paolo Bonzini
2021-02-03 11:00 ` [PATCH v2 00/28] Allow parallel MMU operations with TDP MMU Paolo Bonzini
2021-02-03 17:54 ` Sean Christopherson
2021-02-03 18:13 ` Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210202185734.1680553-29-bgardon@google.com \
--to=bgardon@google.com \
--cc=drjones@redhat.com \
--cc=jmattson@google.com \
--cc=junaids@google.com \
--cc=kernellwp@gmail.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pbonzini@redhat.com \
--cc=peterx@redhat.com \
--cc=pfeiner@google.com \
--cc=pshier@google.com \
--cc=seanjc@google.com \
--cc=thuth@redhat.com \
--cc=vkuznets@redhat.com \
--cc=xiaoguangrong.eric@gmail.com \
--cc=yulei.kernel@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).