From: Calvin Johnson <calvin.johnson@oss.nxp.com>
To: Grant Likely <grant.likely@arm.com>,
"Rafael J . Wysocki" <rafael@kernel.org>,
Jeremy Linton <jeremy.linton@arm.com>,
Andrew Lunn <andrew@lunn.ch>,
Andy Shevchenko <andy.shevchenko@gmail.com>,
Florian Fainelli <f.fainelli@gmail.com>,
Russell King - ARM Linux admin <linux@armlinux.org.uk>,
Cristi Sovaiala <cristian.sovaiala@nxp.com>,
Florin Laurentiu Chiculita <florinlaurentiu.chiculita@nxp.com>,
Ioana Ciornei <ioana.ciornei@nxp.com>,
Madalin Bucur <madalin.bucur@oss.nxp.com>,
Heikki Krogerus <heikki.krogerus@linux.intel.com>,
Marcin Wojtas <mw@semihalf.com>,
Pieter Jansen Van Vuuren <pieter.jansenvv@bamboosystems.io>,
Jon <jon@solid-run.com>, Saravana Kannan <saravanak@google.com>,
Randy Dunlap <rdunlap@infradead.org>
Cc: Laurentiu Tudor <laurentiu.tudor@nxp.com>,
linux-kernel@vger.kernel.org, linux.cj@gmail.com,
Diana Madalina Craciun <diana.craciun@nxp.com>,
netdev@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-acpi@vger.kernel.org,
Calvin Johnson <calvin.johnson@oss.nxp.com>,
"David S. Miller" <davem@davemloft.net>,
Ioana Radulescu <ruxandra.radulescu@nxp.com>,
Jakub Kicinski <kuba@kernel.org>
Subject: [net-next PATCH v5 15/15] net: dpaa2-mac: Add ACPI support for DPAA2 MAC driver
Date: Mon, 8 Feb 2021 20:42:44 +0530 [thread overview]
Message-ID: <20210208151244.16338-16-calvin.johnson@oss.nxp.com> (raw)
In-Reply-To: <20210208151244.16338-1-calvin.johnson@oss.nxp.com>
Modify dpaa2_mac_connect() to support ACPI along with DT.
Modify dpaa2_mac_get_node() to get the dpmac fwnode from either
DT or ACPI.
Replace of_get_phy_mode with fwnode_get_phy_mode to get
phy-mode for a dpmac_node.
Use helper function phylink_fwnode_phy_connect() to find phy_dev and
connect to mac->phylink.
Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com>
---
Changes in v5:
- replace fwnode_get_id() with OF and ACPI function calls
Changes in v4: None
Changes in v3: None
Changes in v2:
- Refactor OF functions to use fwnode functions
.../net/ethernet/freescale/dpaa2/dpaa2-mac.c | 91 +++++++++++--------
1 file changed, 54 insertions(+), 37 deletions(-)
diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
index ccaf7e35abeb..87bb49722611 100644
--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
@@ -1,6 +1,9 @@
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/* Copyright 2019 NXP */
+#include <linux/acpi.h>
+#include <linux/property.h>
+
#include "dpaa2-eth.h"
#include "dpaa2-mac.h"
@@ -34,39 +37,51 @@ static int phy_mode(enum dpmac_eth_if eth_if, phy_interface_t *if_mode)
return 0;
}
-/* Caller must call of_node_put on the returned value */
-static struct device_node *dpaa2_mac_get_node(u16 dpmac_id)
+static struct fwnode_handle *dpaa2_mac_get_node(struct device *dev,
+ u16 dpmac_id)
{
- struct device_node *dpmacs, *dpmac = NULL;
- u32 id;
+ struct fwnode_handle *parent, *child = NULL;
+ struct device_node *dpmacs = NULL;
int err;
+ u32 id;
- dpmacs = of_find_node_by_name(NULL, "dpmacs");
- if (!dpmacs)
- return NULL;
+ if (is_of_node(dev->parent->fwnode)) {
+ dpmacs = of_find_node_by_name(NULL, "dpmacs");
+ if (!dpmacs)
+ return NULL;
+ parent = of_fwnode_handle(dpmacs);
+ } else if (is_acpi_node(dev->parent->fwnode)) {
+ parent = dev->parent->fwnode;
+ }
- while ((dpmac = of_get_next_child(dpmacs, dpmac)) != NULL) {
- err = of_property_read_u32(dpmac, "reg", &id);
- if (err)
+ fwnode_for_each_child_node(parent, child) {
+ err = -EINVAL;
+ if (is_acpi_device_node(child))
+ err = acpi_get_local_address(ACPI_HANDLE_FWNODE(child), &id);
+ else if (is_of_node(child))
+ err = of_property_read_u32(to_of_node(child), "reg", &id);
+ if (err) {
continue;
- if (id == dpmac_id)
- break;
+ } else if (id == dpmac_id) {
+ if (is_of_node(dev->parent->fwnode))
+ of_node_put(dpmacs);
+ return child;
+ }
}
-
- of_node_put(dpmacs);
-
- return dpmac;
+ if (is_of_node(dev->parent->fwnode))
+ of_node_put(dpmacs);
+ return NULL;
}
-static int dpaa2_mac_get_if_mode(struct device_node *node,
+static int dpaa2_mac_get_if_mode(struct fwnode_handle *dpmac_node,
struct dpmac_attr attr)
{
phy_interface_t if_mode;
int err;
- err = of_get_phy_mode(node, &if_mode);
- if (!err)
- return if_mode;
+ err = fwnode_get_phy_mode(dpmac_node);
+ if (err > 0)
+ return err;
err = phy_mode(attr.eth_if, &if_mode);
if (!err)
@@ -235,26 +250,27 @@ static const struct phylink_mac_ops dpaa2_mac_phylink_ops = {
};
static int dpaa2_pcs_create(struct dpaa2_mac *mac,
- struct device_node *dpmac_node, int id)
+ struct fwnode_handle *dpmac_node,
+ int id)
{
struct mdio_device *mdiodev;
- struct device_node *node;
+ struct fwnode_handle *node;
- node = of_parse_phandle(dpmac_node, "pcs-handle", 0);
- if (!node) {
+ node = fwnode_find_reference(dpmac_node, "pcs-handle", 0);
+ if (IS_ERR(node)) {
/* do not error out on old DTS files */
netdev_warn(mac->net_dev, "pcs-handle node not found\n");
return 0;
}
- if (!of_device_is_available(node)) {
+ if (!of_device_is_available(to_of_node(node))) {
netdev_err(mac->net_dev, "pcs-handle node not available\n");
- of_node_put(node);
+ of_node_put(to_of_node(node));
return -ENODEV;
}
- mdiodev = of_mdio_find_device(node);
- of_node_put(node);
+ mdiodev = fwnode_mdio_find_device(node);
+ fwnode_handle_put(node);
if (!mdiodev)
return -EPROBE_DEFER;
@@ -283,13 +299,12 @@ static void dpaa2_pcs_destroy(struct dpaa2_mac *mac)
int dpaa2_mac_connect(struct dpaa2_mac *mac)
{
struct net_device *net_dev = mac->net_dev;
- struct device_node *dpmac_node;
+ struct fwnode_handle *dpmac_node = NULL;
struct phylink *phylink;
int err;
mac->if_link_type = mac->attr.link_type;
-
- dpmac_node = dpaa2_mac_get_node(mac->attr.id);
+ dpmac_node = dpaa2_mac_get_node(&mac->mc_dev->dev, mac->attr.id);
if (!dpmac_node) {
netdev_err(net_dev, "No dpmac@%d node found.\n", mac->attr.id);
return -ENODEV;
@@ -306,7 +321,7 @@ int dpaa2_mac_connect(struct dpaa2_mac *mac)
* error out if the interface mode requests them and there is no PHY
* to act upon them
*/
- if (of_phy_is_fixed_link(dpmac_node) &&
+ if (of_phy_is_fixed_link(to_of_node(dpmac_node)) &&
(mac->if_mode == PHY_INTERFACE_MODE_RGMII_ID ||
mac->if_mode == PHY_INTERFACE_MODE_RGMII_RXID ||
mac->if_mode == PHY_INTERFACE_MODE_RGMII_TXID)) {
@@ -327,7 +342,7 @@ int dpaa2_mac_connect(struct dpaa2_mac *mac)
mac->phylink_config.type = PHYLINK_NETDEV;
phylink = phylink_create(&mac->phylink_config,
- of_fwnode_handle(dpmac_node), mac->if_mode,
+ dpmac_node, mac->if_mode,
&dpaa2_mac_phylink_ops);
if (IS_ERR(phylink)) {
err = PTR_ERR(phylink);
@@ -338,13 +353,14 @@ int dpaa2_mac_connect(struct dpaa2_mac *mac)
if (mac->pcs)
phylink_set_pcs(mac->phylink, &mac->pcs->pcs);
- err = phylink_of_phy_connect(mac->phylink, dpmac_node, 0);
+ err = phylink_fwnode_phy_connect(mac->phylink, dpmac_node, 0);
if (err) {
- netdev_err(net_dev, "phylink_of_phy_connect() = %d\n", err);
+ netdev_err(net_dev, "phylink_fwnode_phy_connect() = %d\n", err);
goto err_phylink_destroy;
}
- of_node_put(dpmac_node);
+ if (is_of_node(dpmac_node))
+ fwnode_handle_put(dpmac_node);
return 0;
@@ -353,7 +369,8 @@ int dpaa2_mac_connect(struct dpaa2_mac *mac)
err_pcs_destroy:
dpaa2_pcs_destroy(mac);
err_put_node:
- of_node_put(dpmac_node);
+ if (is_of_node(dpmac_node))
+ fwnode_handle_put(dpmac_node);
return err;
}
--
2.17.1
next prev parent reply other threads:[~2021-02-08 17:39 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-08 15:12 [net-next PATCH v5 00/15] ACPI support for dpaa2 driver Calvin Johnson
2021-02-08 15:12 ` [net-next PATCH v5 01/15] Documentation: ACPI: DSD: Document MDIO PHY Calvin Johnson
2021-02-08 20:01 ` Randy Dunlap
2021-02-09 14:34 ` Calvin Johnson
2021-02-08 15:12 ` [net-next PATCH v5 02/15] net: phy: Introduce fwnode_mdio_find_device() Calvin Johnson
2021-02-08 15:12 ` [net-next PATCH v5 03/15] net: phy: Introduce phy related fwnode functions Calvin Johnson
2021-02-08 15:12 ` [net-next PATCH v5 04/15] of: mdio: Refactor of_phy_find_device() Calvin Johnson
2021-02-08 15:12 ` [net-next PATCH v5 05/15] net: phy: Introduce fwnode_get_phy_id() Calvin Johnson
2021-02-08 15:12 ` [net-next PATCH v5 06/15] of: mdio: Refactor of_get_phy_id() Calvin Johnson
2021-02-08 15:12 ` [net-next PATCH v5 07/15] net: mdiobus: Introduce fwnode_mdiobus_register_phy() Calvin Johnson
2021-02-08 17:40 ` Russell King - ARM Linux admin
2021-02-09 15:04 ` Calvin Johnson
2021-02-08 15:12 ` [net-next PATCH v5 08/15] of: mdio: Refactor of_mdiobus_register_phy() Calvin Johnson
2021-02-08 15:12 ` [net-next PATCH v5 09/15] ACPI: utils: Introduce acpi_get_local_address() Calvin Johnson
2021-02-08 15:12 ` [net-next PATCH v5 10/15] net: mdio: Add ACPI support code for mdio Calvin Johnson
2021-02-08 16:16 ` Andy Shevchenko
2021-02-08 15:12 ` [net-next PATCH v5 11/15] net: mdiobus: Introduce fwnode_mdiobus_register() Calvin Johnson
2021-02-08 15:12 ` [net-next PATCH v5 12/15] net/fsl: Use fwnode_mdiobus_register() Calvin Johnson
2021-02-08 15:12 ` [net-next PATCH v5 13/15] phylink: introduce phylink_fwnode_phy_connect() Calvin Johnson
2021-02-08 15:31 ` Russell King - ARM Linux admin
2021-02-15 5:55 ` Calvin Johnson
2021-02-15 6:01 ` Calvin Johnson
2021-02-08 16:20 ` Russell King - ARM Linux admin
2021-02-08 15:12 ` [net-next PATCH v5 14/15] net: phylink: Refactor phylink_of_phy_connect() Calvin Johnson
2021-02-08 15:12 ` Calvin Johnson [this message]
2021-02-08 16:21 ` [net-next PATCH v5 15/15] net: dpaa2-mac: Add ACPI support for DPAA2 MAC driver Andy Shevchenko
2021-02-08 16:28 ` Russell King - ARM Linux admin
2021-02-15 12:33 ` Calvin Johnson
2021-02-15 15:13 ` Andy Shevchenko
2021-02-15 15:15 ` Andy Shevchenko
2021-02-16 9:59 ` Calvin Johnson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210208151244.16338-16-calvin.johnson@oss.nxp.com \
--to=calvin.johnson@oss.nxp.com \
--cc=andrew@lunn.ch \
--cc=andy.shevchenko@gmail.com \
--cc=cristian.sovaiala@nxp.com \
--cc=davem@davemloft.net \
--cc=diana.craciun@nxp.com \
--cc=f.fainelli@gmail.com \
--cc=florinlaurentiu.chiculita@nxp.com \
--cc=grant.likely@arm.com \
--cc=heikki.krogerus@linux.intel.com \
--cc=ioana.ciornei@nxp.com \
--cc=jeremy.linton@arm.com \
--cc=jon@solid-run.com \
--cc=kuba@kernel.org \
--cc=laurentiu.tudor@nxp.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux.cj@gmail.com \
--cc=linux@armlinux.org.uk \
--cc=madalin.bucur@oss.nxp.com \
--cc=mw@semihalf.com \
--cc=netdev@vger.kernel.org \
--cc=pieter.jansenvv@bamboosystems.io \
--cc=rafael@kernel.org \
--cc=rdunlap@infradead.org \
--cc=ruxandra.radulescu@nxp.com \
--cc=saravanak@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).