From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Heikki Krogerus <heikki.krogerus@linux.intel.com>,
Lee Jones <lee.jones@linaro.org>,
linux-kernel@vger.kernel.org
Subject: [PATCH v1 3/4] mfd: intel-lpss: Switch to use the software nodes
Date: Mon, 1 Mar 2021 16:42:21 +0200 [thread overview]
Message-ID: <20210301144222.31290-3-andriy.shevchenko@linux.intel.com> (raw)
In-Reply-To: <20210301144222.31290-1-andriy.shevchenko@linux.intel.com>
From: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Software node was always created for the device if it was
supplied with additional device properties, so those nodes
might as well be constant.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/mfd/intel-lpss-acpi.c | 24 +++++++++++++++++++----
drivers/mfd/intel-lpss-pci.c | 36 +++++++++++++++++++++++++++--------
drivers/mfd/intel-lpss.c | 2 +-
drivers/mfd/intel-lpss.h | 4 ++--
4 files changed, 51 insertions(+), 15 deletions(-)
diff --git a/drivers/mfd/intel-lpss-acpi.c b/drivers/mfd/intel-lpss-acpi.c
index 14a9cd83d4ef..1f396039d58f 100644
--- a/drivers/mfd/intel-lpss-acpi.c
+++ b/drivers/mfd/intel-lpss-acpi.c
@@ -27,9 +27,13 @@ static const struct property_entry spt_i2c_properties[] = {
{ },
};
+static const struct software_node spt_i2c_node = {
+ .properties = spt_i2c_properties,
+};
+
static const struct intel_lpss_platform_info spt_i2c_info = {
.clk_rate = 120000000,
- .properties = spt_i2c_properties,
+ .swnode = &spt_i2c_node,
};
static const struct property_entry uart_properties[] = {
@@ -39,10 +43,14 @@ static const struct property_entry uart_properties[] = {
{ },
};
+static const struct software_node uart_node = {
+ .properties = uart_properties,
+};
+
static const struct intel_lpss_platform_info spt_uart_info = {
.clk_rate = 120000000,
.clk_con_id = "baudclk",
- .properties = uart_properties,
+ .swnode = &uart_node,
};
static const struct intel_lpss_platform_info bxt_info = {
@@ -56,9 +64,13 @@ static const struct property_entry bxt_i2c_properties[] = {
{ },
};
+static const struct software_node bxt_i2c_node = {
+ .properties = bxt_i2c_properties,
+};
+
static const struct intel_lpss_platform_info bxt_i2c_info = {
.clk_rate = 133000000,
- .properties = bxt_i2c_properties,
+ .swnode = &bxt_i2c_node,
};
static const struct property_entry apl_i2c_properties[] = {
@@ -68,9 +80,13 @@ static const struct property_entry apl_i2c_properties[] = {
{ },
};
+static const struct software_node apl_i2c_node = {
+ .properties = apl_i2c_properties,
+};
+
static const struct intel_lpss_platform_info apl_i2c_info = {
.clk_rate = 133000000,
- .properties = apl_i2c_properties,
+ .swnode = &apl_i2c_node,
};
static const struct acpi_device_id intel_lpss_acpi_ids[] = {
diff --git a/drivers/mfd/intel-lpss-pci.c b/drivers/mfd/intel-lpss-pci.c
index 7837f77d70d0..79c53617489c 100644
--- a/drivers/mfd/intel-lpss-pci.c
+++ b/drivers/mfd/intel-lpss-pci.c
@@ -70,9 +70,13 @@ static const struct property_entry spt_i2c_properties[] = {
{ },
};
+static const struct software_node spt_i2c_node = {
+ .properties = spt_i2c_properties,
+};
+
static const struct intel_lpss_platform_info spt_i2c_info = {
.clk_rate = 120000000,
- .properties = spt_i2c_properties,
+ .swnode = &spt_i2c_node,
};
static const struct property_entry uart_properties[] = {
@@ -82,10 +86,14 @@ static const struct property_entry uart_properties[] = {
{ },
};
+static const struct software_node uart_node = {
+ .properties = uart_properties,
+};
+
static const struct intel_lpss_platform_info spt_uart_info = {
.clk_rate = 120000000,
.clk_con_id = "baudclk",
- .properties = uart_properties,
+ .swnode = &uart_node,
};
static const struct intel_lpss_platform_info bxt_info = {
@@ -95,7 +103,7 @@ static const struct intel_lpss_platform_info bxt_info = {
static const struct intel_lpss_platform_info bxt_uart_info = {
.clk_rate = 100000000,
.clk_con_id = "baudclk",
- .properties = uart_properties,
+ .swnode = &uart_node,
};
static const struct property_entry bxt_i2c_properties[] = {
@@ -105,9 +113,13 @@ static const struct property_entry bxt_i2c_properties[] = {
{ },
};
+static const struct software_node bxt_i2c_node = {
+ .properties = bxt_i2c_properties,
+};
+
static const struct intel_lpss_platform_info bxt_i2c_info = {
.clk_rate = 133000000,
- .properties = bxt_i2c_properties,
+ .swnode = &bxt_i2c_node,
};
static const struct property_entry apl_i2c_properties[] = {
@@ -117,9 +129,13 @@ static const struct property_entry apl_i2c_properties[] = {
{ },
};
+static const struct software_node apl_i2c_node = {
+ .properties = apl_i2c_properties,
+};
+
static const struct intel_lpss_platform_info apl_i2c_info = {
.clk_rate = 133000000,
- .properties = apl_i2c_properties,
+ .swnode = &apl_i2c_node,
};
static const struct property_entry glk_i2c_properties[] = {
@@ -129,19 +145,23 @@ static const struct property_entry glk_i2c_properties[] = {
{ },
};
+static const struct software_node glk_i2c_node = {
+ .properties = glk_i2c_properties,
+};
+
static const struct intel_lpss_platform_info glk_i2c_info = {
.clk_rate = 133000000,
- .properties = glk_i2c_properties,
+ .swnode = &glk_i2c_node,
};
static const struct intel_lpss_platform_info cnl_i2c_info = {
.clk_rate = 216000000,
- .properties = spt_i2c_properties,
+ .swnode = &spt_i2c_node,
};
static const struct intel_lpss_platform_info ehl_i2c_info = {
.clk_rate = 100000000,
- .properties = bxt_i2c_properties,
+ .swnode = &bxt_i2c_node,
};
static const struct pci_device_id intel_lpss_pci_ids[] = {
diff --git a/drivers/mfd/intel-lpss.c b/drivers/mfd/intel-lpss.c
index b0f0781a6b9c..a9bf10bee796 100644
--- a/drivers/mfd/intel-lpss.c
+++ b/drivers/mfd/intel-lpss.c
@@ -399,7 +399,7 @@ int intel_lpss_probe(struct device *dev,
if (ret)
return ret;
- lpss->cell->properties = info->properties;
+ lpss->cell->swnode = info->swnode;
intel_lpss_init_dev(lpss);
diff --git a/drivers/mfd/intel-lpss.h b/drivers/mfd/intel-lpss.h
index a2fbaed061ba..22dbc4aed793 100644
--- a/drivers/mfd/intel-lpss.h
+++ b/drivers/mfd/intel-lpss.h
@@ -15,14 +15,14 @@
struct device;
struct resource;
-struct property_entry;
+struct software_node;
struct intel_lpss_platform_info {
struct resource *mem;
int irq;
unsigned long clk_rate;
const char *clk_con_id;
- const struct property_entry *properties;
+ const struct software_node *swnode;
};
int intel_lpss_probe(struct device *dev,
--
2.30.1
next prev parent reply other threads:[~2021-03-01 14:44 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-01 14:42 [PATCH v1 1/4] mfd: core: Add support for software nodes Andy Shevchenko
2021-03-01 14:42 ` [PATCH v1 2/4] mfd: intel-lpss: Constify device property structures Andy Shevchenko
2021-03-22 14:39 ` Lee Jones
2021-03-01 14:42 ` Andy Shevchenko [this message]
2021-03-22 14:39 ` [PATCH v1 3/4] mfd: intel-lpss: Switch to use the software nodes Lee Jones
2021-03-01 14:42 ` [PATCH v1 4/4] mfd: core: Remove support for dangling device properties Andy Shevchenko
2021-03-22 14:39 ` Lee Jones
2021-03-22 14:38 ` [PATCH v1 1/4] mfd: core: Add support for software nodes Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210301144222.31290-3-andriy.shevchenko@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=heikki.krogerus@linux.intel.com \
--cc=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).